5.1 sound with the "Herkules Gamesourround muse 5.1 DVD" soundcard

And I can't use my microphone with skype

You can start by having a look at this:

https://help.ubuntu.com/community/DebuggingSoundProblems

Please pay particular attention to:

1) The settings in your "Volume Control", especially volumes and switches.

2) Collect as much information as you can to allow for a faster and better support (if possible use the automatic data collection script).

Sorry, I dont know, how to attach text files to lounchpad

tail -2 /proc/asound/oss/sndstat:
0: CMedia PCI
1: CX88

amixer:
Simple mixer control 'Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%]
  Front Right: Playback 31 [100%]
Simple mixer control '3D Control - Switch',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch pswitch-joined cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [on] Capture [on]
  Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Synth',0
  Capabilities: pvolume pswitch pswitch-joined cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [on] Capture [on]
  Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [on] Capture [on]
  Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line-In Mode',0
  Capabilities: enum
  Items: 'Line-In' 'Rear Output' 'Bass Output'
  Item0: 'Line-In'
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 31 [100%] [on] Capture [on]
  Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined cvolume pswitch pswitch-joined cswitch cswitch-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: Playback 0 - 31 Capture 0 - 7
  Mono: Playback 0 [0%] [off] Capture 0 [0%] [on]
Simple mixer control 'Mic Boost',0
  Capabilities: pswitch pswitch-joined cswitch cswitch-joined
  Playback channels: Mono
  Capture channels: Mono
  Mono: Playback [on] Capture [on]
Simple mixer control 'Mic-In Mode',0
  Capabilities: enum
  Items: 'Mic-In' 'Center/LFE Output'
  Item0: 'Mic-In'
Simple mixer control 'Phone',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 7
  Mono: Playback 7 [100%] [on]
Simple mixer control 'IEC958 5V',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 Copyright',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 In Monitor',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 In Phase Inverse',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 In Select',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 In Valid',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 Loop',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958 Output',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'PC Speaker',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 3
  Mono: Playback 3 [100%] [on]
Simple mixer control 'Aux',0
  Capabilities: pvolume pswitch cswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 15
  Front Left: Playback 15 [100%] [on] Capture [on]
  Front Right: Playback 15 [100%] [on] Capture [on]
Simple mixer control 'Four Channel Mode',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

 lspci -nv:
00:00.0 0600: 10de:01e0 (rev c1)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <access denied>

00:00.1 0500: 10de:01eb (rev c1)
        Subsystem: 10de:0c17
        Flags: 66MHz, fast devsel

00:00.2 0500: 10de:01ee (rev c1)
        Subsystem: 10de:0c17
        Flags: 66MHz, fast devsel

00:00.3 0500: 10de:01ed (rev c1)
        Subsystem: 10de:0c17
        Flags: 66MHz, fast devsel

00:00.4 0500: 10de:01ec (rev c1)
        Subsystem: 10de:0c17
        Flags: 66MHz, fast devsel

00:00.5 0500: 10de:01ef (rev c1)
        Subsystem: 10de:0c17
        Flags: 66MHz, fast devsel

00:01.0 0601: 10de:0060 (rev a4)
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: <access denied>

00:01.1 0c05: 10de:0064 (rev a2)
        Subsystem: 10de:0c11
        Flags: 66MHz, fast devsel, IRQ 10
        I/O ports at ec00 [size=32]
        Capabilities: <access denied>

00:02.0 0c03: 10de:0067 (rev a4) (prog-if 10 [OHCI])
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
        Memory at e2002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:02.1 0c03: 10de:0067 (rev a4) (prog-if 10 [OHCI])
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
        Memory at e2003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:02.2 0c03: 10de:0068 (rev a4) (prog-if 20 [EHCI])
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 12
        Memory at e2004000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:04.0 0200: 10de:0066 (rev a1)
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
        Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at e000 [size=8]
        Capabilities: <access denied>

00:08.0 0604: 10de:006c (rev a3) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: de000000-e1ffffff

00:09.0 0101: 10de:0065 (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: 10de:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at f000 [size=16]
        Capabilities: <access denied>

00:1e.0 0604: 10de:01e8 (rev c1) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 32
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        Memory behind bridge: dc000000-ddffffff
        Prefetchable memory behind bridge: d0000000-d7ffffff

01:07.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at de000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <access denied>

01:07.1 0480: 14f1:8801 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at df000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <access denied>

01:07.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <access denied>

01:07.4 0480: 14f1:8804 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <access denied>

01:0a.0 0401: 13f6:0111 (rev 10)
        Subsystem: 1681:a650
        Flags: bus master, medium devsel, latency 32, IRQ 5
        I/O ports at d000 [size=256]
        Capabilities: <access denied>

02:00.0 0300: 10de:0322 (rev a1) (prog-if 00 [VGA])
        Subsystem: 107d:2967
        Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 10
        Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        [virtual] Expansion ROM at dd000000 [disabled] [size=128K]
        Capabilities: <access denied>

asoundconf list:
Names of available sound cards:
CMI8738MC6
CX8801

cat /etc/asound.conf ~/.asoundrc*:
cat: /etc/asound.conf: No such file or directory
cat: /home/mrhonky/.asoundrc*: No such file or directory

dmesg
[ 20.976197] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.976448] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.988589] Memory: 508736k/524224k available (1992k kernel code, 14968k reserved, 893k data, 328k init, 0k highmem)
[ 20.988600] virtual kernel memory layout:
[ 20.988601] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.988602] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.988603] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 20.988605] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 20.988606] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 20.988607] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 20.988609] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 20.988612] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.066128] Calibrating delay using timer specific routine.. 3845.10 BogoMIPS (lpj=7690218)
[ 21.066171] Security Framework v1.0.0 initialized
[ 21.066178] SELinux: Disabled at boot.
[ 21.066195] Mount-cache hash table entries: 512
[ 21.066340] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 21.066349] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 21.066352] CPU: L2 Cache: 512K (64 bytes/line)
[ 21.066354] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 21.066365] Compat vDSO mapped to ffffe000.
[ 21.066370] Remapping vsyscall page to ffffe000
[ 21.066380] Checking 'hlt' instruction... OK.
[ 21.082245] SMP alternatives: switching to UP code
[ 21.082473] Freeing SMP alternatives: 11k freed
[ 21.082690] Early unpacking initramfs... done
[ 21.390555] ACPI: Core revision 20060707
[ 21.397146] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 21.399590] ACPI: setting ELCR to 0200 (from 1e20)
[ 21.400497] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 21.400503] SMP motherboard not detected.
[ 21.506163] Brought up 1 CPUs
[ 21.506422] Booting paravirtualized kernel on bare hardware
[ 21.506498] Time: 8:50:57 Date: 04/29/107
[ 21.506531] NET: Registered protocol family 16
[ 21.506634] EISA bus registered
[ 21.506638] ACPI: bus type pci registered
[ 21.538375] PCI: PCI BIOS revision 2.10 entry at 0xfb540, last bus=2
[ 21.538377] PCI: Using configuration type 1
[ 21.538379] Setting up standard PCI resources
[ 21.552096] ACPI: Interpreter enabled
[ 21.552100] ACPI: Using PIC for interrupt routing
[ 21.552670] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.552675] PCI: Probing PCI hardware (bus 00)
[ 21.552943] PCI: nForce2 C1 Halt Disconnect fixup
[ 21.553802] Boot video device is 0000:02:00.0
[ 21.553850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.610024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 21.610544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 21.611607] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.611939] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.612271] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 21.612600] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.612931] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.613262] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.613593] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 21.613925] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.614264] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.614596] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.614928] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.615268] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.615598] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 21.615927] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.616259] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.616591] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.616896] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 21.617185] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 21.617475] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 21.617763] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 21.618051] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 21.618432] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 21.618803] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 21.619176] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 21.619542] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 21.619906] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 21.620276] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 21.620564] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 21.620930] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 21.621296] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 21.621663] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 21.622032] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 21.625341] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.625359] pnp: PnP ACPI init
[ 21.631254] pnp: PnP ACPI: found 14 devices
[ 21.631259] PnPBIOS: Disabled by ACPI PNP
[ 21.631319] PCI: Using ACPI for IRQ routing
[ 21.631325] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.634464] spurious 8259A interrupt: IRQ7.
[ 21.649133] NET: Registered protocol family 8
[ 21.649135] NET: Registered protocol family 20
[ 21.649733] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 21.649737] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 21.649740] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 21.649743] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 21.649746] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 21.649748] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 21.649753] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 21.649756] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[ 21.650030] PCI: Bridge: 0000:00:08.0
[ 21.650033] IO window: d000-dfff
[ 21.650039] MEM window: de000000-e1ffffff
[ 21.650042] PREFETCH window: disabled.
[ 21.650049] PCI: Bridge: 0000:00:1e.0
[ 21.650051] IO window: disabled.
[ 21.650055] MEM window: dc000000-ddffffff
[ 21.650059] PREFETCH window: d0000000-d7ffffff
[ 21.650070] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 21.650113] NET: Registered protocol family 2
[ 21.686205] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.686296] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.686477] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.686566] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.686569] TCP reno registered
[ 21.698233] checking if image is initramfs... it is
[ 22.283477] Freeing initrd memory: 6777k freed
[ 22.283955] audit: initializing netlink socket (disabled)
[ 22.283970] audit(1180428657.392:1): initialized
[ 22.284082] VFS: Disk quotas dquot_6.5.1
[ 22.284101] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.284146] io scheduler noop registered
[ 22.284149] io scheduler anticipatory registered
[ 22.284152] io scheduler deadline registered
[ 22.284159] io scheduler cfq registered (default)
[ 22.284427] isapnp: Scanning for PnP cards...
[ 22.638919] isapnp: No Plug & Play device found
[ 22.664143] Real Time Clock Driver v1.12ac
[ 22.664202] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.664337] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.664493] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.665037] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.665262] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.665476] mice: PS/2 mouse device common for all mice
[ 22.666107] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.666362] input: Macintosh mouse button emulation as /class/input/input0
[ 22.666397] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.666401] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.666608] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 22.666611] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 22.922311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.922467] EISA: Probing bus 0 at eisa.0
[ 22.922491] Cannot allocate resource for EISA slot 4
[ 22.922494] Cannot allocate resource for EISA slot 5
[ 22.922509] EISA: Detected 0 cards.
[ 22.952601] TCP cubic registered
[ 22.952607] NET: Registered protocol family 1
[ 22.952667] Testing NMI watchdog ... OK.
[ 22.992381] Using IPI No-Shortcut mode
[ 22.992432] ACPI: (supports S0 S1 S4 S5)
[ 22.992484] Magic number: 7:806:827
[ 22.992624] hash matches device ptyt7
[ 22.992639] hash matches device ptyqa
[ 22.993035] Freeing unused kernel memory: 328k freed
[ 22.994062] Time: tsc clocksource has been installed.
[ 23.003174] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.224867] Capability LSM initialized
[ 24.256786] ACPI: Fan [FAN] (on)
[ 24.261834] ACPI: Thermal Zone [THRM] (28 C)
[ 24.767276] usbcore: registered new interface driver usbfs
[ 24.767303] usbcore: registered new interface driver hub
[ 24.767331] usbcore: registered new device driver usb
[ 24.768042] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.768481] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
[ 24.768485] PCI: setting IRQ 11 as level-triggered
[ 24.768489] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11
[ 24.768503] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.768507] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 24.768685] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 24.768703] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe2002000
[ 24.799464] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 24.812238] SCSI subsystem initialized
[ 24.817348] libata version 2.20 loaded.
[ 24.836485] usb usb1: configuration #1 chosen from 1 choice
[ 24.836514] hub 1-0:1.0: USB hub found
[ 24.836526] hub 1-0:1.0: 3 ports detected
[ 24.935150] Floppy drive(s): fd0 is 1.44M
[ 24.942413] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 10
[ 24.942419] PCI: setting IRQ 10 as level-triggered
[ 24.942423] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 10 (level, low) -> IRQ 10
[ 24.942440] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 24.942444] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 24.942474] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 24.942491] ohci_hcd 0000:00:02.1: irq 10, io mem 0xe2003000
[ 25.004050] usb usb2: configuration #1 chosen from 1 choice
[ 25.004082] hub 2-0:1.0: USB hub found
[ 25.004093] hub 2-0:1.0: 3 ports detected
[ 25.011018] FDC 0 is a post-1991 82077
[ 25.110469] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 12
[ 25.110475] PCI: setting IRQ 12 as level-triggered
[ 25.110479] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 12 (level, low) -> IRQ 12
[ 25.110492] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 25.110495] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 25.110521] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 25.110559] ehci_hcd 0000:00:02.2: debug port 1
[ 25.110564] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 25.110574] ehci_hcd 0000:00:02.2: irq 12, io mem 0xe2004000
[ 25.110582] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.110657] usb usb3: configuration #1 chosen from 1 choice
[ 25.110684] hub 3-0:1.0: USB hub found
[ 25.110693] hub 3-0:1.0: 6 ports detected
[ 25.218493] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[ 25.218498] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
[ 25.218506] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.742231] eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:04.0
[ 25.746351] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 25.746377] NFORCE2: chipset revision 162
[ 25.746380] NFORCE2: not 100% native mode: will probe irqs later
[ 25.746389] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 25.746400] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 25.746410] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 25.746418] Probing IDE interface ide0...
[ 26.037945] hda: SAMSUNG SP1634N, ATA DISK drive
[ 26.105821] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 26.321926] hdb: SAMSUNG SV2044D, ATA DISK drive
[ 26.325542] usb 1-1: configuration #1 chosen from 1 choice
[ 26.378175] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.399122] Probing IDE interface ide1...
[ 26.637787] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 26.840134] usb 2-1: configuration #1 chosen from 1 choice
[ 26.843133] hub 2-1:1.0: USB hub found
[ 26.846078] hub 2-1:1.0: 4 ports detected
[ 27.137875] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 27.207089] usb 2-1.2: new full speed USB device using ohci_hcd and address 3
[ 27.332177] usb 2-1.2: configuration #1 chosen from 1 choice
[ 27.342114] usbcore: registered new interface driver hiddev
[ 27.348672] input: Logitech USB Gaming Mouse as /class/input/input2
[ 27.348696] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1
[ 27.361557] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1
[ 27.361573] usbcore: registered new interface driver usbhid
[ 27.361576] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 27.362781] usbcore: registered new interface driver libusual
[ 27.366810] Initializing USB Mass Storage driver...
[ 27.366913] scsi0 : SCSI emulation for USB Mass Storage devices
[ 27.366971] usbcore: registered new interface driver usb-storage
[ 27.366974] USB Mass Storage support registered.
[ 27.367074] usb-storage: device found at 3
[ 27.367076] usb-storage: waiting for device to settle before scanning
[ 27.483027] ide1 at 0x170-0x177,0x376 on irq 15
[ 27.495053] hda: max request size: 512KiB
[ 27.506326] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
[ 27.508387] hda: cache flushes supported
[ 27.508447] hda: hda1 hda2 hda3 < hda5 >
[ 27.539050] hdb: max request size: 128KiB
[ 27.539126] hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(33)
[ 27.539131] hdb: cache flushes not supported
[ 27.539165] hdb: hdb1 hdb2 < hdb5 >
[ 27.601089] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 27.601099] Uniform CD-ROM driver Revision: 3.20
[ 28.112447] Attempting manual resume
[ 28.112451] swsusp: Resume From Partition 3:5
[ 28.112453] PM: Checking swsusp image.
[ 28.114031] PM: Resume from disk failed.
[ 28.129496] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 28.129501] EXT3-fs: write access will be enabled during recovery.
[ 28.727890] kjournald starting. Commit interval 5 seconds
[ 28.727906] EXT3-fs: recovery complete.
[ 28.730371] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.371458] usb-storage: device scan complete
[ 32.378455] scsi 0:0:0:0: Direct-Access GENERIC USB DISK DEVICE 1.00 PQ: 0 ANSI: 2
[ 40.301496] NET: Registered protocol family 17
[ 40.607044] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 40.607086] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 40.746766] Linux agpgart interface v0.102 (c) Dave Jones
[ 40.749739] agpgart: Detected NVIDIA nForce2 chipset
[ 40.753933] agpgart: AGP aperture is 64M @ 0xd8000000
[ 40.888302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.891075] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.229843] input: PC Speaker as /class/input/input3
[ 41.568399] usbcore: registered new interface driver xpad
[ 41.568404] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 41.724541] nvidia: module license 'NVIDIA' taints kernel.
[ 41.982520] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
[ 41.982527] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
[ 41.982987] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 41.989356] Linux video capture interface: v2.00
[ 42.033609] cx2388x v4l2 driver version 0.0.6 loaded
[ 42.033681] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
[ 42.033731] CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
[ 42.033736] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
[ 42.141868] parport: PnPBIOS parport detected.
[ 42.141930] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 42.198182] tveeprom 2-0050: Hauppauge model 92001, rev B1B1, serial# 206118
[ 42.198188] tveeprom 2-0050: MAC address is 00-0D-FE-03-25-26
[ 42.198191] tveeprom 2-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
[ 42.198194] tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 42.198197] tveeprom 2-0050: audio processor is CX883 (idx 32)
[ 42.198199] tveeprom 2-0050: decoder processor is CX883 (idx 22)
[ 42.198202] tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
[ 42.198205] cx88[0]: hauppauge eeprom: model=92001
[ 42.198311] input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input4
[ 42.198365] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 10, latency: 32, mmio: 0xde000000
[ 42.198413] cx88[0]/0: registered device video0 [v4l2]
[ 42.198445] cx88[0]/0: registered device vbi0
[ 42.200911] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 42.200959] cx88[0]/2: cx2388x 8802 Driver Manager
[ 42.200982] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
[ 42.200993] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 10, latency: 32, mmio: 0xe0000000
[ 42.425419] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
[ 42.425425] PCI: setting IRQ 5 as level-triggered
[ 42.425429] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 42.495502] cx2388x alsa driver version 0.0.6 loaded
[ 42.495573] ACPI: PCI Interrupt 0000:01:07.1[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
[ 42.495606] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 42.515583] SCSI device sda: 510494 512-byte hdwr sectors (261 MB)
[ 42.522785] sda: Write Protect is off
[ 42.522789] sda: Mode Sense: 00 c0 00 00
[ 42.522792] sda: assuming drive cache: write through
[ 42.541416] SCSI device sda: 510494 512-byte hdwr sectors (261 MB)
[ 42.548098] sda: Write Protect is off
[ 42.548101] sda: Mode Sense: 00 c0 00 00
[ 42.548104] sda: assuming drive cache: write through
[ 42.548108] sda: sda1
[ 42.566471] sd 0:0:0:0: Attached scsi removable disk sda
[ 42.578129] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.986832] fuse init (API version 7.8)
[ 43.010723] lp0: using parport0 (interrupt-driven).
[ 43.069609] cx2388x dvb driver version 0.0.6 loaded
[ 43.069615] cx8802_register_driver() ->registering driver type=dvb access=shared
[ 43.069620] CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
[ 43.069624] cx88[0]/2: cx2388x based dvb card
[ 43.133574] DVB: registering new adapter (cx88[0]).
[ 43.133582] DVB: registering frontend 0 (Conexant CX24123/CX24109)...
[ 43.167558] Adding 1510068k swap on /dev/disk/by-uuid/c9c9f5cc-dc4b-4d21-a991-21c7cc89a4ba. Priority:-1 extents:1 across:1510068k
[ 43.301781] EXT3 FS on hda2, internal journal
[ 43.490384] NET: Registered protocol family 10
[ 43.490485] lo: Disabled Privacy Extensions
[ 48.841090] Using specific hotkey driver
[ 48.909239] ibm_acpi: ec object not found
[ 48.996592] input: Power Button (FF) as /class/input/input5
[ 49.001120] ACPI: Power Button (FF) [PWRF]
[ 49.037251] input: Power Button (CM) as /class/input/input6
[ 49.041831] ACPI: Power Button (CM) [PWRB]
[ 49.211556] No dock devices found.
[ 49.273174] pcc_acpi: loading...
[ 52.802663] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 52.803005] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 52.803269] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[ 53.122646] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 2:00.0] forgot to specify physical device; fix it!
[ 53.125238] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 2:00.0] forgot to specify physical device; fix it!
[ 53.126073] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 2:00.0] forgot to specify physical device; fix it!
[ 54.033395] ppdev: user-space parallel port driver
[ 54.867998] lirc_dev: IR Remote Control driver registered, at major 61
[ 54.876564] lirc_i2c: no version for "lirc_unregister_plugin" found: kernel tainted.
[ 54.927426] bttv: driver version 0.9.16 loaded
[ 54.927432] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 55.016780] ivtv: ==================== START INIT IVTV ====================
[ 55.016786] ivtv: version 0.10.1 (tagged release) loading
[ 55.016788] ivtv: Linux version: 2.6.20-15-generic SMP mod_unload 586
[ 55.016791] ivtv: In case of problems please include the debug info between
[ 55.016793] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
[ 55.016795] ivtv: any module options, when mailing the ivtv-users mailinglist.
[ 55.016834] ivtv: ==================== END INIT IVTV ====================
[ 58.805349] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 58.805355] apm: overridden by ACPI.
[ 61.000430] /dev/vmmon[5480]: Module vmmon: registered with major=10 minor=165
[ 61.000829] /dev/vmmon[5480]: Module vmmon: initialized
[ 61.424159] /dev/vmnet: open called by PID 5506 (vmnet-bridge)
[ 61.424465] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 61.424661] /dev/vmnet: port on hub 0 successfully opened
[ 61.424860] bridge-eth0: enabling the bridge
[ 61.425022] bridge-eth0: up
[ 61.425161] bridge-eth0: already up
[ 61.425313] bridge-eth0: attached
[ 61.632787] /dev/vmnet: open called by PID 5520 (vmnet-natd)
[ 61.633084] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 61.633283] /dev/vmnet: port on hub 8 successfully opened
[ 61.737032] /dev/vmnet: open called by PID 5550 (vmnet-bridge)
[ 61.737466] device eth0 entered promiscuous mode
[ 61.737478] audit(1180421496.481:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
[ 61.737481] bridge-eth0: enabled promiscuous mode
[ 61.737483] /dev/vmnet: port on hub 0 successfully opened
[ 61.738266] bridge-eth0: enabling the bridge
[ 61.738431] bridge-eth0: up
[ 61.738569] bridge-eth0: already up
[ 61.738719] bridge-eth0: attached
[ 61.738982] device eth0 left promiscuous mode
[ 61.738988] audit(1180421496.481:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
[ 61.738991] bridge-eth0: disabled promiscuous mode
[ 61.739644] device eth0 entered promiscuous mode
[ 61.739650] audit(1180421496.481:4): dev=eth0 prom=256 old_prom=0 auid=4294967295
[ 61.739653] bridge-eth0: enabled promiscuous mode
[ 61.751522] bridge-eth0: down
[ 61.751704] bridge-eth0: detached
[ 61.752103] device eth0 left promiscuous mode
[ 61.752112] audit(1180421496.493:5): dev=eth0 prom=0 old_prom=256 auid=4294967295
[ 61.752115] bridge-eth0: disabled promiscuous mode
[ 61.776309] /dev/vmnet: open called by PID 5561 (vmnet-natd)
[ 61.776624] /dev/vmnet: port on hub 8 successfully opened
[ 62.066544] Bluetooth: Core ver 2.11
[ 62.066631] NET: Registered protocol family 31
[ 62.066633] Bluetooth: HCI device and connection manager initialized
[ 62.066638] Bluetooth: HCI socket layer initialized
[ 62.083747] Bluetooth: L2CAP ver 2.8
[ 62.083752] Bluetooth: L2CAP socket layer initialized
[ 62.091881] Bluetooth: RFCOMM socket layer initialized
[ 62.091898] Bluetooth: RFCOMM TTY layer initialized
[ 62.091900] Bluetooth: RFCOMM ver 1.8
[ 65.679257] eth0: no IPv6 routers present
[ 71.629586] /dev/vmnet: open called by PID 5836 (vmnet-netifup)
[ 71.629892] /dev/vmnet: port on hub 8 successfully opened
[ 71.633182] /dev/vmnet: open called by PID 5837 (vmnet-netifup)
[ 71.633590] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 71.633789] /dev/vmnet: port on hub 1 successfully opened
[ 71.771730] /dev/vmnet: open called by PID 5860 (vmnet-netifup)
[ 71.771847] /dev/vmnet: port on hub 1 successfully opened
[ 71.803706] /dev/vmnet: open called by PID 5861 (vmnet-netifup)
[ 71.803820] /dev/vmnet: port on hub 8 successfully opened
[ 72.325958] /dev/vmnet: open called by PID 5852 (vmnet-dhcpd)
[ 72.326070] /dev/vmnet: port on hub 1 successfully opened
[ 72.404042] /dev/vmnet: open called by PID 5859 (vmnet-dhcpd)
[ 72.404154] /dev/vmnet: port on hub 8 successfully opened
[ 82.142199] vmnet8: no IPv6 routers present
[ 82.262191] vmnet1: no IPv6 routers present
[ 465.825580] eth0: link down.
[ 470.467566] eth0: link up.
[ 470.467718] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 488.579891] eth0: no IPv6 routers present
[ 490.075818] usb 3-2: new high speed USB device using ehci_hcd and address 4
[ 490.210469] usb 3-2: configuration #1 chosen from 1 choice
[ 490.210700] scsi1 : SCSI emulation for USB Mass Storage devices
[ 490.210850] usb-storage: device found at 4
[ 490.210852] usb-storage: waiting for device to settle before scanning
[ 495.211575] usb-storage: device scan complete
[ 495.214076] scsi 1:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0000 PQ: 0 ANSI: 0
[ 495.216256] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 495.217172] sdb: Write Protect is off
[ 495.217175] sdb: Mode Sense: 27 00 00 00
[ 495.217178] sdb: assuming drive cache: write through
[ 495.218301] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 495.219171] sdb: Write Protect is off
[ 495.219174] sdb: Mode Sense: 27 00 00 00
[ 495.219176] sdb: assuming drive cache: write through
[ 495.219180] sdb: sdb1
[ 495.226779] sd 1:0:0:0: Attached scsi disk sdb
[ 495.226827] sd 1:0:0:0: Attached scsi generic sg1 type 0

cat /proc/interrupts
           CPU0
  0: 608434 XT-PIC-XT timer
  1: 889 XT-PIC-XT i8042
  2: 0 XT-PIC-XT cascade
  5: 57282 XT-PIC-XT CMI8738-MC6
  6: 5 XT-PIC-XT floppy
  7: 343 XT-PIC-XT parport0
  8: 3 XT-PIC-XT rtc
  9: 0 XT-PIC-XT acpi
 10: 398743 XT-PIC-XT ohci_hcd:usb2, cx88[0], cx88[0], cx88[0], nvidia
 11: 505286 XT-PIC-XT ohci_hcd:usb1, eth0
 12: 16461 XT-PIC-XT ehci_hcd:usb3
 14: 40772 XT-PIC-XT ide0
 15: 21691 XT-PIC-XT ide1
NMI: 765
LOC: 608344
ERR: 12
MIS: 0

I think you have not configured correctly your mixer.
Right click on the speaker icon on the top right corner and choose Open Volume Control.
In Edit->Preferences select all tracks and switches.
Check them all, unmute where applicable.
Some switches (like MIC-IN MODE) seems to switch between some inputs and outputs (don't ask me why) so try changing them (for instance Mic-in mode to 'Center/LFE Output').

You also have an IRQ problem, but thats not affecting the sound card.

Thank you,

I unmuted everything and Skype works correct now, but I dont have Bass from the Subwoofer

In Windows, it works.

What is IRQ?

In your mixer, try switching this switch "Four Channel Mode" off.

Don't worry about IRQ (its something your CPU, the core of your computer, uses to communicate with your peripherals).

Switching "Four Channel Mode" off don't solves the problem

Try the "3D Control - Switch" and all the others. Its just a matter of setting your mixer right.

No, I tried all switches but it sitll doesn't wirks

I think there is a bug in the drivers (no tracks to control center/LFE volume). You may want to issue a bug report here:

https://bugtrack.alsa-project.org/alsa-bug/login_page.php

We have another user with the same chip and very similar problem:

https://answers.launchpad.net/ubuntu/+question/7468

And a similar bug in our bug tracker:

https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/104617