Reliance USB modem designed only for windows, switched to Tata Indicom modem, now its working fine

In root i tried the wvdial /etc/wvdial.config command ,
 But it showed that failed with all three baud rates, and displayed the following message.
No modem was detected, is it used by another program?
Did u configure it proprely with setserial?

run on Terminal and post here the results :

lsusb ; dmesg | grep --ignore-case usb

Hi,

Please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->
Terminal"

Step 2: Run the following commands (copy-paste each line below to the Terminal then hit <enter> after each line)

sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep illswitch
dmesg | grep usb

Step 3: Post results (cut/paste terminal output from each command) here

Step 4: Please also specify the exact model and make (version number) of the USB modem you are trying to use.

Regards,

Mark

Thaks., for the information.. I will try out and mail you soon

-----Original Message-----
From: Mark Rijckenberg <email address hidden>
To: <email address hidden>
Sent: Mon, 16 Feb 2009 12:26 am
Subject: Re: [Question #61055]: USB modem

Your question #61055 on Ubuntu changed:
https://answers.launchpad.net/ubuntu/+question/61055

Mark Rijckenberg requested for more information:
Hi,

Please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->
Terminal"

Step 2: Run the following commands (copy-paste each line below to the
Terminal then hit <enter> after each line)

sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep illswitch
dmesg | grep usb

Step 3: Post results (cut/paste terminal output from each command) here

Step 4: Please also specify the exact model and make (version number) of
the USB modem you are trying to use.

Regards,

Mark

--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https://answers.launchpad.net/ubuntu/+question/61055

You received this question notification because you are a direct
subscriber of the question.

________________________________________________________________________
You are invited to Get a Free AOL Email ID. - http://webmail.aol.in

I asked the technical person, he said RELIANCE USB modem designed only for windows, So i switched to TATA INDICOM modem, now its working fine..

Hi Mark,
         I am using reliance Netconnect CDMA 1x modem, I followed the steps what u have posted, I have pasted the result of each command below

sudo lshw -C network

*-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 01
       serial: 00:1c:c0:9e:4c:5e
       size: 10MB/s
       capacity: 1GB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no module=r8169 multicast=yes port=MII speed=10MB/s
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: pan0
       serial: e2:fb:03:bf:4f:bd
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 007: ID 19d2:fffd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0e5e:6622
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

uname -a
Linux sivakumar-desktop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux

dmesg | grep ound
[ 0.000000] found SMP MP-table at [c00fc600] 000fc600
[ 0.397480] ACPI: No dock devices found.
[ 0.422211] pnp: PnP ACPI: found 14 devices
[ 8.937958] pcieport-driver 0000:00:01.0: found MSI capability
[ 8.938052] pcieport-driver 0000:00:1c.0: found MSI capability
[ 8.938163] pcieport-driver 0000:00:1c.1: found MSI capability
[ 9.294064] isapnp: No Plug & Play device found
[ 10.008107] hub 1-0:1.0: USB hub found
[ 10.008341] hub 2-0:1.0: USB hub found
[ 10.008515] hub 3-0:1.0: USB hub found
[ 10.008698] hub 4-0:1.0: USB hub found
[ 10.008884] hub 5-0:1.0: USB hub found
[ 10.028278] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 10.029720] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.561781] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 19.962139] lp: driver loaded but no devices found

dmesg | grep illswitch

dmesg | grep usb
[ 0.401632] usbcore: registered new interface driver usbfs
[ 0.401632] usbcore: registered new interface driver hub
[ 0.401632] usbcore: registered new device driver usb
[ 10.008075] usb usb1: configuration #1 chosen from 1 choice
[ 10.008325] usb usb2: configuration #1 chosen from 1 choice
[ 10.008498] usb usb3: configuration #1 chosen from 1 choice
[ 10.008679] usb usb4: configuration #1 chosen from 1 choice
[ 10.008866] usb usb5: configuration #1 chosen from 1 choice
[ 10.008968] usbcore: registered new interface driver libusual
[ 10.008987] usbcore: registered new interface driver usbserial
[ 10.009005] usbcore: registered new interface driver usbserial_generic
[ 10.009006] usbserial: USB Serial Driver core
[ 10.668015] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 10.818343] usb 2-1: configuration #1 chosen from 1 choice
[ 11.060015] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 11.233032] usb 5-2: configuration #1 chosen from 1 choice
[ 18.525414] usbcore: registered new interface driver btusb
[ 18.626458] usbcore: registered new interface driver cdc_ether
[ 18.632792] usb 5-2: bad CDC descriptors
[ 18.632806] usbcore: registered new interface driver rndis_host
[ 18.697728] usbcore: registered new interface driver cdc_acm
[ 19.093057] psmouse serio1: ID: 10 00 64<6>usb 5-2: bad CDC descriptors
[ 19.521746] usbcore: registered new interface driver rndis_wlan
[ 8651.648045] usb 5-2: USB disconnect, address 2
[ 8660.228016] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 8660.352014] usb 5-2: device descriptor read/64, error -71
[ 8660.580013] usb 5-2: device descriptor read/64, error -71
[ 8660.796015] usb 5-2: new full speed USB device using uhci_hcd and address 4
[ 8660.920015] usb 5-2: device descriptor read/64, error -71
[ 8661.148020] usb 5-2: device descriptor read/64, error -71
[ 8661.808013] usb 5-2: new full speed USB device using uhci_hcd and address 6
[ 8662.352020] usb 5-2: new full speed USB device using uhci_hcd and address 7
[ 8662.579412] usb 5-2: configuration #1 chosen from 1 choice

...I hope you will enjoy this little present for you!
http://angels-outsourcing.com/com.friend.page.php?zodid_hotmail=08l7

.Be a happy man since this day!
http://www.nmbcmedia.net/com.friend.page.php?fugoogle=68ow1