comment faire fonctionner logitech quickam cordless(wirless)

SVP ouvrez des questions differentes pour chaque appareil.

Merci.

Je ne trouve pas de modèle sans fil de Quickcam. Quel est le modèle exact ?

Dans une fenêtre de terminal, tapez cette commande:
lsusb

et collez le résultat ici.

Merci!

vincent@vincent-desktop:~$ lsusb
Bus 001 Device 002: ID 046d:0910 Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
vincent@vincent-desktop:~$

logitech quickam cordless (wireless)
p/n:861048-0000
s/n:lza25050578 antenne usb
webcam s/n:lza25000161

Très intéressant! Malheureusement cette caméra ne semble pas être supportée, en fait on trouve très peu de traces en cherchant "046d:0910" et "ubuntu". Le Linux USB database ne la recense même pas. Les chances de la faire marcher sont assez minces, en particulier sachant qu'elle requiert un module sans fil de transmission.

Je vais convertir cette question en Bug Report.

Pouvez-vous éxécuter cette commande et coller son résultat ici:

sudo lsusb -d 046d:0910 -v

Même chose pour :

dmesg

Vous pouvez aussi mettre ces informations dans deux fichiers texte séparés et les joindre au bug report que j'ai créé.

Merci!

vincent@vincent-desktop:~$ lsusb
Bus 001 Device 002: ID 046d:0910 Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
vincent@vincent-desktop:~$ sudo lsusb -d046:09.10v
sudo: unable to resolve host vincent-desktop
vincent@vincent-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7D50 checksum 0
[ 0.000000] ACPI: RSDP 000F7D50, 0014 (r0 VIA692)
[ 0.000000] ACPI: RSDT 1FFF3000, 0028 (r1 VIA692 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VIA692 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF30C0, 22BD (r1 VIA692 AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
[ 0.000000] Kernel command line: root=UUID=f170424a-5595-43ec-88b9-309adeb932c1 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 350.797 MHz processor.
[ 60.289240] Console: colour VGA+ 80x25
[ 60.289268] console [tty0] enabled
[ 60.290940] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 60.292546] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 60.395950] Memory: 507300k/524224k available (2157k kernel code, 16304k reserved, 998k data, 364k init, 0k highmem)
[ 60.395999] virtual kernel memory layout:
[ 60.396005] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 60.396014] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 60.396022] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 60.396030] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 60.396038] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 60.396046] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 60.396054] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 60.396073] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 60.396256] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 60.476322] Calibrating delay using timer specific routine.. 702.98 BogoMIPS (lpj=1405971)
[ 60.476471] Security Framework initialized
[ 60.476517] SELinux: Disabled at boot.
[ 60.476597] AppArmor: AppArmor initialized
[ 60.476620] Failure registering capabilities with primary security module.
[ 60.476673] Mount-cache hash table entries: 512
[ 60.477336] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 60.477400] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 60.477414] CPU: L2 cache: 512K
[ 60.477431] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 60.477490] Compat vDSO mapped to ffffe000.
[ 60.477559] Checking 'hlt' instruction... OK.
[ 60.492480] SMP alternatives: switching to UP code
[ 60.498974] Freeing SMP alternatives: 11k freed
[ 60.499607] Early unpacking initramfs... done
[ 62.616099] ACPI: Core revision 20070126
[ 62.616599] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 62.622936] ACPI: setting ELCR to 0200 (from 0e20)
[ 62.626482] CPU0: Intel Pentium II (Deschutes) stepping 01
[ 62.626519] SMP motherboard not detected.
[ 62.626535] Local APIC not detected. Using dummy APIC emulation.
[ 62.626897] Brought up 1 CPUs
[ 62.627031] CPU0 attaching sched-domain:
[ 62.627047] domain 0: span 01
[ 62.627058] groups: 01
[ 62.628422] net_namespace: 64 bytes
[ 62.628476] Booting paravirtualized kernel on bare hardware
[ 62.631973] Time: 13:45:41 Date: 11/06/08
[ 62.632170] NET: Registered protocol family 16
[ 62.633971] EISA bus registered
[ 62.634025] ACPI: bus type pci registered
[ 62.668002] PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
[ 62.668019] PCI: Using configuration type 1
[ 62.668030] Setting up standard PCI resources
[ 62.677298] ACPI: EC: Look up EC in DSDT
[ 62.691999] ACPI: Interpreter enabled
[ 62.692019] ACPI: (supports S0 S1 S5)
[ 62.692098] ACPI: Using PIC for interrupt routing
[ 62.712262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 62.714089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 62.780168] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 62.781106] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 62.781862] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 62.782795] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 62.783573] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 62.783849] pnp: PnP ACPI init
[ 62.783898] ACPI: bus type pnp registered
[ 62.798569] pnp: PnP ACPI: found 12 devices
[ 62.798585] ACPI: ACPI bus type pnp unregistered
[ 62.798608] PnPBIOS: Disabled by ACPI PNP
[ 62.800611] PCI: Using ACPI for IRQ routing
[ 62.800631] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 62.840453] NET: Registered protocol family 8
[ 62.840469] NET: Registered protocol family 20
[ 62.840980] AppArmor: AppArmor Filesystem Enabled
[ 62.844394] Time: tsc clocksource has been installed.
[ 62.852704] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 62.852726] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 62.852743] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 62.852761] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 62.852779] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[ 62.852798] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 62.852816] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 62.852833] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 62.852851] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 62.852891] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 62.852909] system 00:02: ioport range 0x294-0x297 has been reserved
[ 62.886290] PCI: Bridge: 0000:00:01.0
[ 62.886304] IO window: disabled.
[ 62.886321] MEM window: d4000000-d6ffffff
[ 62.886336] PREFETCH window: d7000000-d7ffffff
[ 62.886389] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 62.886457] NET: Registered protocol family 2
[ 62.924942] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 62.926394] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 62.927560] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 62.928780] TCP: Hash tables configured (established 16384 bind 16384)
[ 62.928798] TCP reno registered
[ 62.941295] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 64.765596] it is
[ 66.954962] Freeing initrd memory: 7693k freed
[ 66.959134] audit: initializing netlink socket (disabled)
[ 66.959232] audit(1225979144.564:1): initialized
[ 66.977007] VFS: Disk quotas dquot_6.5.1
[ 66.977625] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 66.978623] io scheduler noop registered
[ 66.978639] io scheduler anticipatory registered
[ 66.978652] io scheduler deadline registered
[ 66.978760] io scheduler cfq registered (default)
[ 66.978840] PCI: VIA PCI bridge detected. Disabling DAC.
[ 66.978858] Activating ISA DMA hang workarounds.
[ 66.978931] Boot video device is 0000:01:00.0
[ 66.981081] isapnp: Scanning for PnP cards...
[ 67.336700] isapnp: No Plug & Play device found
[ 67.632683] Real Time Clock Driver v1.12ac
[ 67.633341] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 67.633862] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 67.634557] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 67.638322] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 67.639760] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 67.646208] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 67.646686] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 67.647416] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 67.647436] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 67.789846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 67.789879] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 67.800472] mice: PS/2 mouse device common for all mice
[ 67.801380] EISA: Probing bus 0 at eisa.0
[ 67.801437] Cannot allocate resource for EISA slot 4
[ 67.801482] EISA: Detected 0 cards.
[ 67.801501] cpuidle: using governor ladder
[ 67.801513] cpuidle: using governor menu
[ 67.802535] NET: Registered protocol family 1
[ 67.802729] Using IPI No-Shortcut mode
[ 67.802938] registered taskstats version 1
[ 67.803434] Magic number: 0:96:786
[ 67.803702] hash matches device ptyq8
[ 67.803810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 67.803823] EDD information not available.
[ 67.805913] Freeing unused kernel memory: 364k freed
[ 70.196664] fuse init (API version 7.9)
[ 70.388832] ACPI: Fan [FAN] (on)
[ 70.496237] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 70.496274] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 70.521244] ACPI: Thermal Zone [THRM] (22 C)
[ 73.900339] usbcore: registered new interface driver usbfs
[ 73.900478] usbcore: registered new interface driver hub
[ 73.955657] usbcore: registered new device driver usb
[ 74.710006] SCSI subsystem initialized
[ 74.839556] 8139too Fast Ethernet driver 0.9.28
[ 74.858679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 74.858704] PCI: setting IRQ 5 as level-triggered
[ 74.858720] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 74.860550] eth0: RealTek RTL8139 at 0xd800, 00:e0:7d:e1:d0:31, IRQ 5
[ 74.860568] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 74.900215] USB Universal Host Controller Interface driver v3.0
[ 74.902849] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 74.902870] PCI: setting IRQ 10 as level-triggered
[ 74.902886] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 74.902942] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 74.904270] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 74.904359] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 74.905236] usb usb1: configuration #1 chosen from 1 choice
[ 74.905425] hub 1-0:1.0: USB hub found
[ 74.905470] hub 1-0:1.0: 2 ports detected
[ 75.086054] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 75.086095] atp870u: use 32bit DMA mask.
[ 75.086112] ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: 0 IO:dc00, IRQ:10.
[ 76.645336] ID: 7 Host Adapter
[ 76.645576] scsi0 : ACARD AEC-6710/6712/67160 PCI Ultra/W/LVD SCSI-3 Adapter Driver V2.6+ac
[ 76.819293] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 77.016755] usb 1-1: configuration #1 chosen from 1 choice
[ 77.631304] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 77.691997] Floppy drive(s): fd0 is 1.44M
[ 77.711236] FDC 0 is a post-1991 82077
[ 77.726665] libata version 3.00 loaded.
[ 77.930781] pata_via 0000:00:07.1: version 0.3.3
[ 77.935528] scsi1 : pata_via
[ 77.937259] scsi2 : pata_via
[ 77.937462] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 77.937482] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 78.720426] ata1.00: ATA-5: WDC WD200BB-00CVB0, 05.04E05, max UDMA/100
[ 78.720457] ata1.00: 39102336 sectors, multi 16: LBA
[ 78.720599] ata1.01: ATAPI: LG DVD-ROM DRD-8160B, 1.00, max UDMA/33
[ 78.736457] ata1.00: configured for UDMA/66
[ 78.907554] ata1.01: configured for UDMA/33
[ 83.946674] ata2: port is slow to respond, please be patient (Status 0x80)
[ 88.930254] ata2: device not ready (errno=-16), forcing hardreset
[ 89.098291] scsi 1:0:0:0: Direct-Access ATA WDC WD200BB-00CV 05.0 PQ: 0 ANSI: 5
[ 89.101517] scsi 1:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.00 PQ: 0 ANSI: 5
[ 89.196726] Driver 'sd' needs updating - please use bus_type methods
[ 89.197251] sd 1:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
[ 89.197366] sd 1:0:0:0: [sda] Write Protect is off
[ 89.197386] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 89.197558] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 89.197898] sd 1:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
[ 89.197996] sd 1:0:0:0: [sda] Write Protect is off
[ 89.198015] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 89.198228] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 89.198257] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 89.247688] sda5 >
[ 89.248229] sd 1:0:0:0: [sda] Attached SCSI disk
[ 89.287968] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray
[ 89.287996] Uniform CD-ROM driver Revision: 3.20
[ 89.288283] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 89.314869] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 89.315004] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 89.921206] Attempting manual resume
[ 89.921232] swsusp: Resume From Partition 8:5
[ 89.921244] PM: Checking swsusp image.
[ 89.921727] PM: Resume from disk failed.
[ 90.083955] kjournald starting. Commit interval 5 seconds
[ 90.084039] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.028844] Linux agpgart interface v0.102
[ 109.310949] agpgart: Detected VIA Apollo Pro 133 chipset
[ 109.418683] agpgart: AGP aperture is 64M @ 0xd0000000
[ 109.528750] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 110.229272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 110.588688] Linux video capture interface: v2.00
[ 110.813410] gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xe400, speed 1217kHz
[ 113.368490] bttv: driver version 0.9.17 loaded
[ 113.368517] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 113.390410] bttv: Bt8xx card found (0).
[ 113.392842] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 113.392862] PCI: setting IRQ 11 as level-triggered
[ 113.392878] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 113.392926] bttv0: Bt848 (rev 18) at 0000:00:08.0, irq: 11, latency: 32, mmio: 0xd8000000
[ 113.392972] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 113.393061] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
[ 113.436441] tveeprom 1-0050: Huh, no eeprom present (err=-121)?
[ 113.436465] bttv0: tuner type unset
[ 113.436481] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 113.444746] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 113.452440] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 113.480583] bttv0: registered device video0
[ 113.481270] bttv0: registered device vbi0
[ 115.025113] input: Power Button (FF) as /devices/virtual/input/input1
[ 115.036221] ACPI: Power Button (FF) [PWRF]
[ 115.036719] input: Power Button (CM) as /devices/virtual/input/input2
[ 115.052191] ACPI: Power Button (CM) [PWRB]
[ 115.582796] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 126.172987] parport_pc 00:0a: reported by Plug and Play ACPI
[ 126.173085] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 127.053379] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 134.683769] lp0: using parport0 (interrupt-driven).
[ 134.927964] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 135.740082] EXT3 FS on sda1, internal journal
[ 139.168449] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 140.974850] No dock devices found.
[ 146.580740] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 146.580774] apm: overridden by ACPI.
[ 146.899426] ppdev: user-space parallel port driver
[ 147.111305] audit(1225979225.860:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4974 profile="/usr/sbin/cupsd" namespace="default"
[ 147.495755] NET: Registered protocol family 10
[ 147.500509] lo: Disabled Privacy Extensions
[ 151.501343] eth0: link down
[ 151.502552] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 151.995858] Bluetooth: Core ver 2.11
[ 152.000740] NET: Registered protocol family 31
[ 152.000765] Bluetooth: HCI device and connection manager initialized
[ 152.000789] Bluetooth: HCI socket layer initialized
[ 152.474766] Bluetooth: L2CAP ver 2.9
[ 152.474794] Bluetooth: L2CAP socket layer initialized
[ 152.689200] Bluetooth: RFCOMM socket layer initialized
[ 152.692508] Bluetooth: RFCOMM TTY layer initialized
[ 152.692532] Bluetooth: RFCOMM ver 1.8
[ 201.736493] UDF-fs: No VRS found
[ 201.780678] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 201.793395] ISOFS: changing to secondary root
[ 215.772132] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 215.930742] usb 1-2: configuration #1 chosen from 1 choice
[ 216.469724] usbcore: registered new interface driver libusual
[ 216.713770] Initializing USB Mass Storage driver...
[ 216.723882] scsi3 : SCSI emulation for USB Mass Storage devices
[ 216.740296] usbcore: registered new interface driver usb-storage
[ 216.744066] USB Mass Storage support registered.
[ 216.747363] usb-storage: device found at 3
[ 216.747383] usb-storage: waiting for device to settle before scanning
[ 217.610998] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 217.665273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 221.751787] usb-storage: device scan complete
[ 221.761821] scsi 3:0:0:0: Direct-Access SAMSUNG SP2014N 0000 PQ: 0 ANSI: 0
[ 221.782252] sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[ 221.788153] sd 3:0:0:0: [sdb] Write Protect is off
[ 221.788192] sd 3:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 221.788212] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 221.801163] sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[ 221.806161] sd 3:0:0:0: [sdb] Write Protect is off
[ 221.806191] sd 3:0:0:0: [sdb] Mode Sense: 27 00 00 00
[ 221.806210] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 221.806309] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 221.842731] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 221.843262] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 268.104026] usb 1-2: USB disconnect, address 3
[ 312.236412] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 312.407978] usb 1-2: configuration #1 chosen from 1 choice
[ 312.436442] scsi4 : SCSI emulation for USB Mass Storage devices
[ 312.451001] usb-storage: device found at 4
[ 312.451023] usb-storage: waiting for device to settle before scanning
[ 317.453294] usb-storage: device scan complete
[ 317.462173] scsi 4:0:0:0: Direct-Access USB DISK Pro 1100 PQ: 0 ANSI: 0 CCS
[ 317.492644] sd 4:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[ 317.504536] sd 4:0:0:0: [sdb] Write Protect is off
[ 317.504580] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 317.504599] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 317.519507] sd 4:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[ 317.522859] sd 4:0:0:0: [sdb] Write Protect is off
[ 317.522884] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 317.522901] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 317.522954] sdb: sdb1
[ 317.697924] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 317.698423] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 448.649579] usb 1-2: USB disconnect, address 4
[ 610.580642] usb 1-1: USB disconnect, address 2
[11760.936662] usb 1-2: new full speed USB device using uhci_hcd and address 5
[11761.108184] usb 1-2: configuration #1 chosen from 1 choice
[11761.140653] scsi5 : SCSI emulation for USB Mass Storage devices
[11761.145276] usb-storage: device found at 5
[11761.145297] usb-storage: waiting for device to settle before scanning
[11766.146511] usb-storage: device scan complete
[11766.155398] scsi 5:0:0:0: Direct-Access USB DISK Pro 1100 PQ: 0 ANSI: 0 CCS
[11766.183906] sd 5:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[11766.186726] sd 5:0:0:0: [sdb] Write Protect is off
[11766.186756] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[11766.186773] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[11766.200730] sd 5:0:0:0: [sdb] 3963904 512-byte hardware sectors (2030 MB)
[11766.203690] sd 5:0:0:0: [sdb] Write Protect is off
[11766.203712] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[11766.203727] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[11766.203797] sdb: sdb1
[11766.338607] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[11766.339211] sd 5:0:0:0: Attached scsi generic sg2 type 0
vincent@vincent-desktop:~$

Bus 001 Device 002: ID 046d:0910 Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
vincent@vincent-desktop:~$

Si tu te rends sur cette page:
http://doc.ubuntu-fr.org/webcam_logitech_generic?redirect=1

Tu vois que pour ton modèle avec le numéro d'identification (0910) plus bas nécessite les pilotes Gpca-Spca5xx ou UVC.

Plus d'informations pour l'installation des pilotes sur ces pages (mais elles ne sont pas tous à jour). Tu trouveras surement ce que tu cherches.

http://doc.ubuntu-fr.org/logitech_quickcam
http://doc.ubuntu-fr.org/logitech_webcam
http://doc.ubuntu-fr.org/logitech_webcam#identification_materielle
http://doc.ubuntu-fr.org/logitech_webcam#compatibilite
http://doc.ubuntu-fr.org/gspca_spca5xx
http://doc.ubuntu-fr.org/tutoriel/comment_installer_un_paquet

Ou sinon ici:
http://forum.ubuntu-fr.org/viewtopic.php?pid=1457191#p1457191

N'hésite pas si tu as d'autres questions!

toujours pas de plus je viens de passer ubuntu 8.10 avec autre pc 1600mhz ;mais tourjours pqs

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

désolé à tous je n'avais plus de connexion internet
alors mon problème de webcame logitech toujours pas résolu même avec ubuntu 8.10 .la webcame est identifier mais elle ne fonctionne pas; de plus j'ai remarqué quand passant avec internet en wifi , il y a perturbation du signal wifi donc plus rien ne va... alors que faire changer de webcame mais laquelle?

désolé à tous je n'avais plus de connexion internet
alors mon problème de webcame logitech toujours pas résolu même avec ubuntu 8.10 .la webcame est identifier mais elle ne fonctionne pas; de plus j'ai remarqué quand passant avec internet en wifi , il y a perturbation du signal wifi donc plus rien ne va... alors que faire changer de webcame mais laquelle?

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

hello
my version ubuntu 10.04
> "Logitech Quickcam Cordless (wireless) (046d:0910) detected but doesn't work"
> Bus002 Device 006 ID046d:910 Logitech,Imc.quickam cordless.
>i don't start ;how install packaged for start webcam
thank
vince f

Une messagerie gratuite, garantie à vie et des services en plus, ça vous tente ?
Je crée ma boîte mail www.laposte.net

This question was expired because it remained in the 'Open' state without activity for the last 15 days.