How can I make work a Zoran Pinnacle/Miro DC10plus in Ubuntu?

Asked by Michele

Hello!

I want to use my Zoran Pinnacle DC10+ to capture vhs or to record them on my pc. In this thread, https://answers.launchpad.net/ubuntu/+question/48483, I discovered I have problems with this video capture card. Below I posted the output of dmesg. Here I underline this line, that another user pointed to me:

i2c-adapter i2c-0: Error: command never complete

Question information

Language:
English Edit question
Status:
Expired
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Michele (michele-dorigatti) said :
#1

m@jacopo:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6AF0 checksum 0
[ 0.000000] ACPI: RSDP 000F6AF0, 0014 (r0 ATIA3 )
[ 0.000000] ACPI: RSDT 0DFF3000, 0028 (r1 ATIA3 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 ATIA3 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0DFF30C0, 38B3 (r1 ATIA3 AWRDACPI 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f1ff0000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: root=UUID=3379050b-f9ff-4dfb-9ff2-b4ebcc911e02 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (011cc000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1528.499 MHz processor.
[ 16.274822] Console: colour VGA+ 80x25
[ 16.274829] console [tty0] enabled
[ 16.275148] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.275354] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 16.285706] Memory: 215300k/229312k available (2177k kernel code, 13456k reserved, 1006k data, 368k init, 0k highmem)
[ 16.285717] virtual kernel memory layout:
[ 16.285719] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 16.285720] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.285722] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 16.285724] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 16.285725] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 16.285727] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 16.285729] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 16.285733] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.285802] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.365724] Calibrating delay using timer specific routine.. 3058.76 BogoMIPS (lpj=6117536)
[ 16.365777] Security Framework initialized
[ 16.365790] SELinux: Disabled at boot.
[ 16.365823] AppArmor: AppArmor initialized
[ 16.365830] Failure registering capabilities with primary security module.
[ 16.365845] Mount-cache hash table entries: 512
[ 16.366060] Initializing cgroup subsys ns
[ 16.366069] Initializing cgroup subsys cpuacct
[ 16.366085] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 16.366099] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.366103] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.366107] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000 00000000
[ 16.366124] Compat vDSO mapped to ffffe000.
[ 16.366146] Checking 'hlt' instruction... OK.
[ 16.382079] SMP alternatives: switching to UP code
[ 16.383756] Freeing SMP alternatives: 11k freed
[ 16.383973] Early unpacking initramfs... done
[ 16.831430] ACPI: Core revision 20070126
[ 16.831575] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.833150] ACPI: setting ELCR to 0200 (from 1c20)
[ 16.834466] CPU0: AMD Athlon(tm) XP 1800+ stepping 02
[ 16.834483] SMP motherboard not detected.
[ 16.834487] Local APIC not detected. Using dummy APIC emulation.
[ 16.834579] Brought up 1 CPUs
[ 16.834615] CPU0 attaching sched-domain:
[ 16.834619] domain 0: span 01
[ 16.834621] groups: 01
[ 16.835001] net_namespace: 64 bytes
[ 16.835012] Booting paravirtualized kernel on bare hardware
[ 16.835640] Time: 9:47:51 Date: 10/27/08
[ 16.835698] NET: Registered protocol family 16
[ 16.836033] EISA bus registered
[ 16.836051] ACPI: bus type pci registered
[ 16.896465] PCI: PCI BIOS revision 2.10 entry at 0xfb700, last bus=1
[ 16.896469] PCI: Using configuration type 1
[ 16.896476] Setting up standard PCI resources
[ 16.902224] ACPI: EC: Look up EC in DSDT
[ 16.905918] ACPI: Interpreter enabled
[ 16.905922] ACPI: (supports S0 S1 S4 S5)
[ 16.905941] ACPI: Using PIC for interrupt routing
[ 16.911163] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.911578] PCI quirk: region 0500-053f claimed by ali7101 ACPI
[ 16.911583] PCI quirk: region 0400-041f claimed by ali7101 SMB
[ 16.911739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.911973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 16.928538] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 16.928754] ACPI: PCI Interrupt Link [LNK2] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.928987] ACPI: PCI Interrupt Link [LNK3] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 16.929203] ACPI: PCI Interrupt Link [LNK4] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.929412] ACPI: PCI Interrupt Link [LNK5] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 16.929622] ACPI: PCI Interrupt Link [LNK6] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.929769] ACPI: PCI Interrupt Link [LNK7] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 16.929983] ACPI: PCI Interrupt Link [LNK8] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 16.930256] ACPI: PCI Interrupt Link [LNK9] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 16.930491] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.930543] pnp: PnP ACPI init
[ 16.930557] ACPI: bus type pnp registered
[ 16.933904] pnp: PnP ACPI: found 12 devices
[ 16.933908] ACPI: ACPI bus type pnp unregistered
[ 16.933915] PnPBIOS: Disabled by ACPI PNP
[ 16.934312] PCI: Using ACPI for IRQ routing
[ 16.934318] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.964991] NET: Registered protocol family 8
[ 16.964994] NET: Registered protocol family 20
[ 16.965123] AppArmor: AppArmor Filesystem Enabled
[ 16.968918] Time: tsc clocksource has been installed.
[ 16.976970] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 16.976974] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 16.976978] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 16.976982] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 16.976986] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 16.976990] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 16.976994] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 16.976998] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 16.977002] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 16.977012] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 17.007626] PCI: Bridge: 0000:00:01.0
[ 17.007630] IO window: d000-dfff
[ 17.007636] MEM window: e8000000-e80fffff
[ 17.007641] PREFETCH window: e4000000-e7ffffff
[ 17.007668] NET: Registered protocol family 2
[ 17.044962] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 17.045288] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 17.045469] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 17.045641] TCP: Hash tables configured (established 8192 bind 8192)
[ 17.045645] TCP reno registered
[ 17.057020] checking if image is initramfs... it is
[ 17.508254] Switched to high resolution mode on CPU 0
[ 17.889945] Freeing initrd memory: 7314k freed
[ 17.890997] audit: initializing netlink socket (disabled)
[ 17.891026] audit(1225100872.608:1): initialized
[ 17.894269] VFS: Disk quotas dquot_6.5.1
[ 17.894397] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.894647] io scheduler noop registered
[ 17.894650] io scheduler anticipatory registered
[ 17.894653] io scheduler deadline registered
[ 17.894669] io scheduler cfq registered (default)
[ 17.894687] ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
[ 17.894720] Activating ISA DMA hang workarounds.
[ 17.894729] Boot video device is 0000:01:05.0
[ 17.895155] isapnp: Scanning for PnP cards...
[ 18.161791] isapnp: No Plug & Play device found
[ 18.205854] Real Time Clock Driver v1.12ac
[ 18.206011] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.206189] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.206374] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.207340] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.207950] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.209204] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.209312] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.209471] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 18.209476] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 18.209996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.215379] mice: PS/2 mouse device common for all mice
[ 18.215570] EISA: Probing bus 0 at eisa.0
[ 18.215616] EISA: Detected 0 cards.
[ 18.215622] cpuidle: using governor ladder
[ 18.215625] cpuidle: using governor menu
[ 18.215859] NET: Registered protocol family 1
[ 18.215908] Using IPI No-Shortcut mode
[ 18.215966] registered taskstats version 1
[ 18.216091] Magic number: 12:243:779
[ 18.216360] hash matches device ptyq1
[ 18.216448] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.216451] EDD information not available.
[ 18.217212] Freeing unused kernel memory: 368k freed
[ 18.241597] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.560397] fuse init (API version 7.9)
[ 19.583583] ACPI: Fan [FAN] (on)
[ 19.591315] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 19.593320] ACPI: Thermal Zone [THRM] (22 C)
[ 20.519896] usbcore: registered new interface driver usbfs
[ 20.519941] usbcore: registered new interface driver hub
[ 20.534570] usbcore: registered new device driver usb
[ 20.552147] SCSI subsystem initialized
[ 20.616563] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.617204] ACPI: PCI Interrupt Link [LNK9] enabled at IRQ 11
[ 20.617210] PCI: setting IRQ 11 as level-triggered
[ 20.617214] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNK9] -> GSI 11 (level, low) -> IRQ 11
[ 20.617238] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 20.617815] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 20.617846] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8110000
[ 20.643585] libata version 3.00 loaded.
[ 20.673815] usb usb1: configuration #1 chosen from 1 choice
[ 20.673859] hub 1-0:1.0: USB hub found
[ 20.673873] hub 1-0:1.0: 2 ports detected
[ 20.776112] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
[ 20.776122] PCI: setting IRQ 5 as level-triggered
[ 20.776126] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
[ 20.776153] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 20.776197] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 20.776222] ohci_hcd 0000:00:06.0: irq 5, io mem 0xe8112000
[ 20.799507] Floppy drive(s): fd0 is 1.44M
[ 20.818718] FDC 0 is a post-1991 82077
[ 20.833554] usb usb2: configuration #1 chosen from 1 choice
[ 20.833606] hub 2-0:1.0: USB hub found
[ 20.833621] hub 2-0:1.0: 2 ports detected
[ 20.935604] ACPI: Unable to derive IRQ for device 0000:00:04.0
[ 20.935717] ACPI: Unable to derive IRQ for device 0000:00:04.0
[ 20.950684] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.950698] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.953767] alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.
[ 20.953779] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc4) at PCI slot 0000:00:04.0
[ 20.953801] ACPI: Unable to derive IRQ for device 0000:00:04.0
[ 20.953815] ALI15X3: not 100% native mode: will probe irqs later
[ 20.953844] ALI15X3: simplex device: DMA forced
[ 20.953852] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
[ 20.953870] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[ 20.953886] Probing IDE interface ide0...
[ 21.079035] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 21.293357] usb 1-2: configuration #1 chosen from 1 choice
[ 21.909947] hda: Maxtor 6Y060L0, ATA DISK drive
[ 21.910019] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 21.910145] hda: UDMA/100 mode selected
[ 21.910301] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.910381] Probing IDE interface ide1...
[ 21.941746] usbcore: registered new interface driver hiddev
[ 21.949123] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input2
[ 21.957736] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-2
[ 21.957768] usbcore: registered new interface driver usbhid
[ 21.957775] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.700694] hdd: JLMS XJ-HD163, ATAPI CD/DVD-ROM drive
[ 23.483561] hdc: CD-W540E, ATAPI CD/DVD-ROM drive
[ 23.483584] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 23.483701] hdc: UDMA/33 mode selected
[ 23.483799] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 23.483839] hdd: UDMA/33 mode selected
[ 23.483948] ide1 at 0x170-0x177,0x376 on irq 15
[ 23.508933] hda: max request size: 128KiB
[ 23.519064] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63
[ 23.519194] hda: cache flushes supported
[ 23.519273] hda: hda1 hda2 < hda5 hda6 hda7 >
[ 23.573280] hdc: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache
[ 23.573295] Uniform CD-ROM driver Revision: 3.20
[ 23.578013] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 24.044190] Attempting manual resume
[ 24.044198] swsusp: Resume From Partition 3:7
[ 24.044201] PM: Checking swsusp image.
[ 24.044433] PM: Resume from disk failed.
[ 24.084762] kjournald starting. Commit interval 5 seconds
[ 24.084793] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.830489] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.145139] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.212922] Linux agpgart interface v0.102
[ 36.464584] Linux video capture interface: v2.00
[ 36.569973] Linux video codec intermediate layer: v0.2
[ 36.700388] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 36.749600] agpgart: Detected Ati IGP320/M chipset
[ 36.759547] agpgart: AGP aperture is 64M @ 0xe0000000
[ 36.798420] input: Power Button (FF) as /devices/virtual/input/input4
[ 36.812217] ACPI: Power Button (FF) [PWRF]
[ 36.812406] input: Sleep Button (FF) as /devices/virtual/input/input5
[ 36.827959] ACPI: Sleep Button (FF) [SLPF]
[ 36.828194] input: Power Button (CM) as /devices/virtual/input/input6
[ 36.839971] ACPI: Power Button (CM) [PWRB]
[ 36.840227] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 36.855944] ACPI: Sleep Button (CM) [SLPB]
[ 36.943960] Zoran MJPEG board driver version 0.9.5
[ 36.944431] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 36.944437] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 36.944447] MJPEG[0]: Zoran ZR36067 (rev 2) irq: 11, memory: 0xe8113000
[ 36.944450] MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
[ 37.323242] i2c-adapter i2c-0: Error: command never completed
[ 37.339213] i2c-adapter i2c-0: Error: command never completed
[ 37.475243] parport_pc 00:0a: reported by Plug and Play ACPI
[ 37.475281] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 37.602832] i2c-adapter i2c-0: Error: command never completed
[ 37.618807] i2c-adapter i2c-0: Error: command never completed
[ 37.634783] i2c-adapter i2c-0: Error: command never completed
[ 37.650749] i2c-adapter i2c-0: Error: command never completed
[ 38.097528] ZORAN: 1 card(s) found
[ 38.097539] DC10plus[0]: zr36057_init() - initializing card[0], zr=cea20a40
[ 39.964981] ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10
[ 39.964991] PCI: setting IRQ 10 as level-triggered
[ 39.964995] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNK8] -> GSI 10 (level, low) -> IRQ 10
[ 43.102788] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2061: AC'97 1 does not respond - RESET
[ 43.118761] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2070: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 43.118776] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ali5451/ali5451.c:1927: ali mixer 1 creating error.
[ 44.017831] loop: module loaded
[ 44.051218] lp0: using parport0 (interrupt-driven).
[ 44.232106] Adding 650592k swap on /dev/hda7. Priority:-1 extents:1 across:650592k
[ 44.826374] EXT3 FS on hda6, internal journal
[ 46.884146] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.719469] No dock devices found.
[ 51.755338] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 51.755351] apm: overridden by ACPI.
[ 51.971337] ppdev: user-space parallel port driver
[ 52.609330] audit(1225100907.716:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4878 profile="/usr/sbin/cupsd" namespace="default"
[ 53.144347] NET: Registered protocol family 10
[ 53.145081] lo: Disabled Privacy Extensions
[ 57.481963] Bluetooth: Core ver 2.11
[ 57.483934] NET: Registered protocol family 31
[ 57.483945] Bluetooth: HCI device and connection manager initialized
[ 57.483952] Bluetooth: HCI socket layer initialized
[ 57.722840] Bluetooth: L2CAP ver 2.9
[ 57.722851] Bluetooth: L2CAP socket layer initialized
[ 57.788668] Bluetooth: RFCOMM socket layer initialized
[ 57.788714] Bluetooth: RFCOMM TTY layer initialized
[ 57.788717] Bluetooth: RFCOMM ver 1.8
[ 58.176896] DC10plus[0]: zoran_open(mythbackend, pid=[5131]), users(-)=0
[ 58.321023] DC10plus[0]: zoran_close(mythbackend, pid=[5131]), users(+)=1
[ 108.224368] PPP generic driver version 2.4.2
[ 136.177898] PPP BSD Compression module registered
[ 136.357928] PPP Deflate Compression module registered

Revision history for this message
Launchpad Janitor (janitor) said :
#2

This question was expired because it remained in the 'Open' state without activity for the last 15 days.