Ubuntu

Boot hangs after "Loading, please wait..." for way too long

Asked by Collin Stocks

After the lines:

Starting up ...
Loading, please wait...

my computer hangs for a good ten or so seconds before printing anything about attempting to resume from swap. During this time, no IO happens at all on the disk, as the hard drive light doesn't come on.

I am running Ubuntu 8.04 on a Dell Inspiron 6000 with Pentium M 32 bit processor, 1.60GHz

Other than this, the rest of the boot sequence is very very fast. Anyone know how to fix this? I already tried reformatting my swap partition, but that didn't do anything. I fsck the hard drive and it passed without changing anything.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Collin Stocks
Solved:
Last query:
Last reply:
Revision history for this message
Mackenzie Morgan (maco.m) said : 		#1

Can you install bootchart and check the chart to see if it shows what's hanging?

Revision history for this message
Collin Stocks (collinstocks) said : 		#2

I have attached my bootchart to this page: https://wiki.ubuntu.com/BootCharting

It is next to my username, CollinStocks.

Seems to me as though it is hanging for way too long at the beginning with no CPU being used and no read/writes to the disk... the resume process also doesn't seem to be doing anything for the five or so seconds it runs, and udevd seems idle during that time period, as well...

What to do, what to do...

Revision history for this message
jacobS (jacsalomon) said : 		#3

Open a terminal and write:

dmesg

Search the log for errors, please.

Revision history for this message
Collin Stocks (collinstocks) said : 		#4

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d3800 (usable)
[ 0.000000] BIOS-e820: 000000003f7d3800 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 260051) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260051
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260051
[ 0.000000] On node 0 totalpages: 260051
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30436 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FC9B0 checksum 0
[ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 3F7D3FD3, 0040 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: FACP 3F7D4C00, 0074 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: DSDT 3F7D5800, 3107 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F7E4000, 0040
[ 0.000000] ACPI: APIC 3F7D5400, 0068 (r1 DELL CPi R 27D5091C ASL 47)
[ 0.000000] ACPI: MCFG 3F7D53C0, 003E (r16 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: BOOT 3F7D4FC0, 0028 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: SSDT 3F7D43E6, 023E (r1 PmRef Cpu0Ist 3000 INTL 20030522)
[ 0.000000] ACPI: SSDT 3F7D420E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
[ 0.000000] ACPI: SSDT 3F7D4013, 01FB (r1 PmRef CpuPm 3000 INTL 20030522)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258020
[ 0.000000] Kernel command line: root=UUID=81b023b3-67f6-4a8a-8616-73ec094e2234 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.039 MHz processor.
[ 4.669562] Console: colour VGA+ 80x25
[ 4.669566] console [tty0] enabled
[ 4.669898] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 4.670341] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 4.701154] Memory: 1018688k/1040204k available (2177k kernel code, 20800k reserved, 1006k data, 368k init, 122700k highmem)
[ 4.701163] virtual kernel memory layout:
[ 4.701164] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 4.701165] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 4.701167] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 4.701168] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 4.701169] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 4.701171] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 4.701172] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 4.701176] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 4.701213] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 4.781168] Calibrating delay using timer specific routine.. 3195.54 BogoMIPS (lpj=6391089)
[ 4.781195] Security Framework initialized
[ 4.781202] SELinux: Disabled at boot.
[ 4.781216] AppArmor: AppArmor initialized
[ 4.781221] Failure registering capabilities with primary security module.
[ 4.781229] Mount-cache hash table entries: 512
[ 4.781359] Initializing cgroup subsys ns
[ 4.781364] Initializing cgroup subsys cpuacct
[ 4.781375] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 4.781386] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.781389] CPU: L2 cache: 2048K
[ 4.781392] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 4.781402] Compat vDSO mapped to ffffe000.
[ 4.781414] Checking 'hlt' instruction... OK.
[ 4.797557] SMP alternatives: switching to UP code
[ 4.799530] Freeing SMP alternatives: 11k freed
[ 4.799641] Early unpacking initramfs... done
[ 5.202640] ACPI: Core revision 20070126
[ 5.202697] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 5.206465] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 5.206490] Total of 1 processors activated (3195.54 BogoMIPS).
[ 5.206678] ENABLING IO-APIC IRQs
[ 5.206870] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 5.352717] Brought up 1 CPUs
[ 5.352745] CPU0 attaching sched-domain:
[ 5.352748] domain 0: span 01
[ 5.352750] groups: 01
[ 5.352916] net_namespace: 64 bytes
[ 5.352927] Booting paravirtualized kernel on bare hardware
[ 5.353415] Time: 17:01:08 Date: 08/27/08
[ 5.353439] NET: Registered protocol family 16
[ 5.353637] EISA bus registered
[ 5.353662] ACPI: bus type pci registered
[ 5.391281] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
[ 5.391284] PCI: Using configuration type 1
[ 5.391300] Setting up standard PCI resources
[ 5.396095] ACPI: EC: Look up EC in DSDT
[ 5.400217] ACPI: Interpreter enabled
[ 5.400223] ACPI: (supports S0 S3 S4 S5)
[ 5.400235] ACPI: Using IOAPIC for interrupt routing
[ 5.412628] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 5.413315] Force enabled HPET at base address 0xfed00000
[ 5.413322] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 5.413326] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 5.413824] PCI: Transparent bridge - 0000:00:1e.0
[ 5.413895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.414372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 5.423364] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 5.423470] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 5.423573] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 5.423675] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 5.423765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.423857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.423949] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.424074] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 5.424106] pnp: PnP ACPI init
[ 5.424113] ACPI: bus type pnp registered
[ 5.437557] pnpacpi: exceeded the max number of mem resources: 12
[ 5.449880] pnpacpi: exceeded the max number of IO resources: 40
[ 5.449950] pnp: PnP ACPI: found 12 devices
[ 5.449952] ACPI: ACPI bus type pnp unregistered
[ 5.449955] PnPBIOS: Disabled by ACPI PNP
[ 5.450168] PCI: Using ACPI for IRQ routing
[ 5.450170] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 5.488563] NET: Registered protocol family 8
[ 5.488566] NET: Registered protocol family 20
[ 5.488731] hpet clockevent registered
[ 5.488738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 5.488742] hpet0: 3 64-bit timers, 14318180 Hz
[ 5.489777] AppArmor: AppArmor Filesystem Enabled
[ 5.492552] Time: tsc clocksource has been installed.
[ 5.500582] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 5.500585] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 5.500589] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 5.500592] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 5.500595] system 00:00: iomem range 0x100000-0x3f7d37ff could not be reserved
[ 5.500598] system 00:00: iomem range 0x3f7d3800-0x3f7fffff could not be reserved
[ 5.500602] system 00:00: iomem range 0x3f800000-0x3fffffff could not be reserved
[ 5.500605] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 5.500609] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 5.500612] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 5.500615] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 5.500619] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 5.500625] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 5.500629] system 00:02: ioport range 0x1000-0x1005 has been reserved
[ 5.500632] system 00:02: ioport range 0x1008-0x100f has been reserved
[ 5.500638] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 5.500641] system 00:03: ioport range 0x1006-0x1007 has been reserved
[ 5.500644] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 5.500647] system 00:03: ioport range 0x1060-0x107f has been reserved
[ 5.500650] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 5.500653] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 5.500656] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 5.500663] system 00:08: ioport range 0x900-0x90f has been reserved
[ 5.500666] system 00:08: ioport range 0x910-0x91f has been reserved
[ 5.500669] system 00:08: ioport range 0x920-0x92f has been reserved
[ 5.500672] system 00:08: ioport range 0x930-0x93f has been reserved
[ 5.500675] system 00:08: ioport range 0x940-0x97f has been reserved
[ 5.500682] system 00:0b: ioport range 0x7b0-0x7bb has been reserved
[ 5.500685] system 00:0b: ioport range 0x7c0-0x7df has been reserved
[ 5.500688] system 00:0b: ioport range 0xbb0-0xbbb has been reserved
[ 5.500691] system 00:0b: ioport range 0xbc0-0xbdf has been reserved
[ 5.500694] system 00:0b: ioport range 0xfb0-0xfbb has been reserved
[ 5.500697] system 00:0b: ioport range 0xfc0-0xfdf has been reserved
[ 5.500700] system 00:0b: ioport range 0x13b0-0x13bb has been reserved
[ 5.500703] system 00:0b: ioport range 0x13c0-0x13df has been reserved
[ 5.500706] system 00:0b: ioport range 0x17b0-0x17bb has been reserved
[ 5.500709] system 00:0b: ioport range 0x17c0-0x17df has been reserved
[ 5.500712] system 00:0b: ioport range 0x1bb0-0x1bbb has been reserved
[ 5.500715] system 00:0b: ioport range 0x1bc0-0x1bdf has been reserved
[ 5.500718] system 00:0b: ioport range 0x1fb0-0x1fbb has been reserved
[ 5.500721] system 00:0b: ioport range 0x1fc0-0x1fdf has been reserved
[ 5.500724] system 00:0b: ioport range 0x23b0-0x23bb has been reserved
[ 5.500727] system 00:0b: ioport range 0x23c0-0x23df has been reserved
[ 5.500730] system 00:0b: ioport range 0x27b0-0x27bb has been reserved
[ 5.500733] system 00:0b: ioport range 0x27c0-0x27df has been reserved
[ 5.500736] system 00:0b: ioport range 0x2bb0-0x2bbb has been reserved
[ 5.500740] system 00:0b: ioport range 0x2bc0-0x2bdf has been reserved
[ 5.500743] system 00:0b: ioport range 0x2fb0-0x2fbb has been reserved
[ 5.500746] system 00:0b: ioport range 0x2fc0-0x2fdf has been reserved
[ 5.500749] system 00:0b: ioport range 0x33b0-0x33bb has been reserved
[ 5.500752] system 00:0b: ioport range 0x33c0-0x33df has been reserved
[ 5.500755] system 00:0b: ioport range 0x37b0-0x37bb has been reserved
[ 5.500758] system 00:0b: ioport range 0x37c0-0x37df has been reserved
[ 5.500761] system 00:0b: ioport range 0x3bb0-0x3bbb has been reserved
[ 5.500764] system 00:0b: ioport range 0x3bc0-0x3bdf has been reserved
[ 5.500768] system 00:0b: ioport range 0x3fb0-0x3fbb has been reserved
[ 5.500771] system 00:0b: ioport range 0x3fc0-0x3fdf has been reserved
[ 5.500774] system 00:0b: ioport range 0x43b0-0x43bb has been reserved
[ 5.500777] system 00:0b: ioport range 0x43c0-0x43df has been reserved
[ 5.500780] system 00:0b: ioport range 0x47b0-0x47bb has been reserved
[ 5.500783] system 00:0b: ioport range 0x47c0-0x47df has been reserved
[ 5.500786] system 00:0b: ioport range 0x4bb0-0x4bbb has been reserved
[ 5.500790] system 00:0b: ioport range 0x4bc0-0x4bdf has been reserved
[ 5.500793] system 00:0b: ioport range 0x4fb0-0x4fbb has been reserved
[ 5.500796] system 00:0b: ioport range 0x4fc0-0x4fdf has been reserved
[ 5.500799] system 00:0b: ioport range 0x53b0-0x53bb has been reserved
[ 5.500802] system 00:0b: ioport range 0x53c0-0x53df has been reserved
[ 5.531198] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 5.531201] IO window: 00001400-000014ff
[ 5.531206] IO window: 00001800-000018ff
[ 5.531211] PREFETCH window: 50000000-53ffffff
[ 5.531215] MEM window: 54000000-57ffffff
[ 5.531220] PCI: Bridge: 0000:00:1e.0
[ 5.531221] IO window: disabled.
[ 5.531227] MEM window: dfd00000-dfdfffff
[ 5.531231] PREFETCH window: disabled.
[ 5.531249] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 5.531266] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 5.531272] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 5.531287] NET: Registered protocol family 2
[ 5.568547] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 5.568786] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 5.569596] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 5.570038] TCP: Hash tables configured (established 131072 bind 65536)
[ 5.570041] TCP reno registered
[ 5.580631] checking if image is initramfs... it is
[ 5.992124] Switched to high resolution mode on CPU 0
[ 6.364345] Freeing initrd memory: 7729k freed
[ 6.364564] Simple Boot Flag at 0x79 set to 0x1
[ 6.364988] audit: initializing netlink socket (disabled)
[ 6.365004] audit(1219856468.560:1): initialized
[ 6.365184] highmem bounce pool size: 64 pages
[ 6.367184] VFS: Disk quotas dquot_6.5.1
[ 6.367269] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 6.367413] io scheduler noop registered
[ 6.367416] io scheduler anticipatory registered
[ 6.367418] io scheduler deadline registered
[ 6.367429] io scheduler cfq registered (default)
[ 6.367442] Boot video device is 0000:00:02.0
[ 6.367810] isapnp: Scanning for PnP cards...
[ 6.721899] isapnp: No Plug & Play device found
[ 6.749956] Real Time Clock Driver v1.12ac
[ 6.750074] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 6.750663] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 6.750673] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 6.751536] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 6.751612] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 6.751704] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.756819] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.756823] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.767366] mice: PS/2 mouse device common for all mice
[ 6.767480] EISA: Probing bus 0 at eisa.0
[ 6.767488] Cannot allocate resource for EISA slot 1
[ 6.767524] EISA: Detected 0 cards.
[ 6.767527] cpuidle: using governor ladder
[ 6.767529] cpuidle: using governor menu
[ 6.767622] NET: Registered protocol family 1
[ 6.767649] Using IPI No-Shortcut mode
[ 6.767681] registered taskstats version 1
[ 6.767795] Magic number: 4:805:37
[ 6.767884] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.767887] EDD information not available.
[ 6.768089] Freeing unused kernel memory: 368k freed
[ 6.771160] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 6.993240] fuse init (API version 7.9)
[ 7.014278] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 7.014284] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.014298] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 7.019015] ACPI: Thermal Zone [THM] (37 C)
[ 7.678478] usbcore: registered new interface driver usbfs
[ 7.678506] usbcore: registered new interface driver hub
[ 7.686457] usbcore: registered new device driver usb
[ 7.698415] USB Universal Host Controller Interface driver v3.0
[ 7.698480] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 7.698496] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.698501] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.698855] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.698888] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
[ 7.699032] usb usb1: configuration #1 chosen from 1 choice
[ 7.699059] hub 1-0:1.0: USB hub found
[ 7.699065] hub 1-0:1.0: 2 ports detected
[ 7.802412] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 7.802429] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.802434] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.802460] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.802492] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 7.802621] usb usb2: configuration #1 chosen from 1 choice
[ 7.802646] hub 2-0:1.0: USB hub found
[ 7.802651] hub 2-0:1.0: 2 ports detected
[ 7.872113] SCSI subsystem initialized
[ 7.906298] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 7.906317] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.906322] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.906346] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.906379] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
[ 7.906496] usb usb3: configuration #1 chosen from 1 choice
[ 7.906520] hub 3-0:1.0: USB hub found
[ 7.906526] hub 3-0:1.0: 2 ports detected
[ 7.906613] libata version 3.00 loaded.
[ 8.010205] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 16
[ 8.010224] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 8.010229] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.010253] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 8.010288] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20
[ 8.010407] usb usb4: configuration #1 chosen from 1 choice
[ 8.010432] hub 4-0:1.0: USB hub found
[ 8.010438] hub 4-0:1.0: 2 ports detected
[ 8.114258] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 18
[ 8.114275] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 8.114279] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.114306] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 8.118205] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.118211] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 8.118219] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[ 8.133994] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.134136] usb usb5: configuration #1 chosen from 1 choice
[ 8.134161] hub 5-0:1.0: USB hub found
[ 8.134167] hub 5-0:1.0: 8 ports detected
[ 8.239647] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
[ 8.292374] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.308638] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.308682] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.308698] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 8.312805] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 8.329809] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 8.329817] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 8.329825] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 8.369816] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 8.369842] b44.c:v2.0
[ 8.370001] ahci 0000:00:1f.2: version 3.0
[ 8.370012] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.370020] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 8.370026] ahci: probe of 0000:00:1f.2 failed with error -22
[ 8.390057] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:12:3f:d0:00:69
[ 8.399019] ata_piix 0000:00:1f.2: version 2.12
[ 8.399025] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 8.553586] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.553632] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.553790] scsi0 : ata_piix
[ 8.553940] scsi1 : ata_piix
[ 8.554675] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 8.554678] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 8.719479] ata1.00: ATA-6: ST960815A, 3.ADE, max UDMA/100
[ 8.719483] ata1.00: 117210240 sectors, multi 8: LBA48
[ 8.719486] ata1.00: applying bridge limits
[ 8.733980] ata1.00: configured for UDMA/100
[ 8.913215] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 8.985142] Clocksource tsc unstable (delta = -47833988891 ns)
[ 8.989138] Time: hpet clocksource has been installed.
[ 8.990872] ata2.00: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TD15, max UDMA/33
[ 8.991850] usb 3-2: configuration #1 chosen from 1 choice
[ 9.010848] usbcore: registered new interface driver hiddev
[ 9.012660] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 9.016110] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2
[ 9.016126] usbcore: registered new interface driver usbhid
[ 9.016131] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 9.032305] ata2.00: configured for UDMA/33
[ 9.032432] scsi 0:0:0:0: Direct-Access ATA ST960815A 3.AD PQ: 0 ANSI: 5
[ 9.033007] scsi 1:0:0:0: CD-ROM PHILIPS CDRW/DVD SCB5265 TD15 PQ: 0 ANSI: 5
[ 9.042113] Driver 'sd' needs updating - please use bus_type methods
[ 9.042185] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 9.042199] sd 0:0:0:0: [sda] Write Protect is off
[ 9.042202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.042218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.042265] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 9.042275] sd 0:0:0:0: [sda] Write Protect is off
[ 9.042278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.042294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.042297] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 9.057232] sda1 sda2 sda3
[ 9.057507] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.062842] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.062861] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.063967] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 9.063971] Uniform CD-ROM driver Revision: 3.20
[ 9.064014] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.118442] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc000110d1101]
[ 9.324391] kjournald starting. Commit interval 5 seconds
[ 9.324403] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.517215] Linux agpgart interface v0.102
[ 11.621164] agpgart: Detected an Intel 915GM Chipset.
[ 11.621736] agpgart: Detected 7932K stolen memory.
[ 11.721527] agpgart: AGP aperture is 256M @ 0xc0000000
[ 12.401321] ACPI: AC Adapter [AC] (on-line)
[ 12.892804] intel_rng: FWH not detected
[ 12.987573] ACPI: Battery Slot [BAT0] (battery present)
[ 12.987639] input: Lid Switch as /devices/virtual/input/input3
[ 12.988127] ACPI: Lid Switch [LID]
[ 12.988175] input: Power Button (CM) as /devices/virtual/input/input4
[ 13.003695] ACPI: Power Button (CM) [PBTN]
[ 13.003752] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 13.019692] ACPI: Sleep Button (CM) [SBTN]
[ 13.203516] iTCO_vendor_support: vendor-support=0
[ 13.263494] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 13.263589] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 13.263624] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.463504] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188]
[ 13.591896] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 13.591901] Socket status: 30000006
[ 13.591904] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 13.591913] pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
[ 13.703015] ieee80211_crypt: registered algorithm 'NULL'
[ 13.753484] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.753489] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 13.962743] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input6
[ 13.974004] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.974455] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7
[ 13.986716] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 13.986849] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input8
[ 14.002698] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 14.062842] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 14.062847] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 14.062940] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 14.114720] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 14.203327] sdhci: Secure Digital Host Controller Interface driver
[ 14.203331] sdhci: Copyright(c) Pierre Ossman
[ 15.201627] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 16.190995] input: PS/2 Mouse as /devices/virtual/input/input10
[ 16.230190] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
[ 16.299709] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.352175] cs: IO port probe 0x100-0x3af: clean.
[ 17.353881] cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.354599] cs: IO port probe 0x820-0x8ff: clean.
[ 17.355196] cs: IO port probe 0xc00-0xcf7: clean.
[ 17.355978] cs: IO port probe 0xa00-0xaff: clean.
[ 17.421010] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 17.421038] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[ 17.421062] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 17
[ 17.424139] mmc0: SDHCI at 0xdfdfc700 irq 17 DMA
[ 17.427303] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 18
[ 17.427324] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 17.498858] mmc0: new SD card at address e624
[ 17.704437] mmcblk0: mmc0:e624 SD02G 1985024KiB
[ 17.704473] mmcblk0: p1
[ 17.778785] intel8x0_measure_ac97_clock: measured 55471 usecs
[ 17.778791] intel8x0: clocking to 48000
[ 17.873399] lp: driver loaded but no devices found
[ 18.074528] Adding 2441872k swap on /dev/sda2. Priority:-1 extents:1 across:2441872k
[ 18.134381] EXT3 FS on sda1, internal journal
[ 18.260223] kjournald starting. Commit interval 5 seconds
[ 18.260354] EXT3 FS on sda3, internal journal
[ 18.260358] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.580245] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.704090] CIFS VFS: Error connecting to IPv4 socket. Aborting operation
[ 18.704175] CIFS VFS: cifs_mount failed w/return code = -101
[ 19.226394] No dock devices found.
[ 23.666696] Marking TSC unstable due to: cpufreq changes.
[ 39.554295] apm: BIOS not found.
[ 19.808889] ppdev: user-space parallel port driver
[ 39.747175] audit(1219856546.024:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6923 profile="/usr/sbin/cupsd" namespace="default"
[ 39.921714] NET: Registered protocol family 10
[ 39.922456] lo: Disabled Privacy Extensions
[ 41.282964] Bluetooth: Core ver 2.11
[ 41.283719] NET: Registered protocol family 31
[ 41.283726] Bluetooth: HCI device and connection manager initialized
[ 41.283732] Bluetooth: HCI socket layer initialized
[ 20.687864] Bluetooth: L2CAP ver 2.9
[ 20.687869] Bluetooth: L2CAP socket layer initialized
[ 20.740422] Bluetooth: RFCOMM socket layer initialized
[ 20.740439] Bluetooth: RFCOMM TTY layer initialized
[ 20.740441] Bluetooth: RFCOMM ver 1.8
[ 21.318251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.578994] NET: Registered protocol family 17
[ 34.447712] [drm] Initialized drm 1.1.0 20060810
[ 34.474345] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 34.474357] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.474456] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 48.676807] ieee80211_crypt: registered algorithm 'CCMP'
[ 48.816623] padlock: VIA PadLock not detected.
[ 48.923537] ieee80211_crypt: registered algorithm 'TKIP'
[ 27.517735] eth1: no IPv6 routers present
[ 95.592595] sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
[ 95.592608] sr: Sense Key : No Sense [current]
[ 95.592611] sr: Add. Sense: No additional sense information

Revision history for this message
jacobS (jacsalomon) said : 		#5

Your boot don't have errors, probably is the memory ram check and you have 1Ghz, I think this very normal.

Revision history for this message
Collin Stocks (collinstocks) said : 		#6

I'm not sure if it is...

I actually timed the boot using a physical timer, and the boot takes about twenty seconds longer than bootchart reports. This means that something is going on before bootchart is loaded which is causing the hang.

Also, although there have been hangs of about three seconds in previous versions of ubuntu, none has ever been anywhere near this long.

Perhaps something is configured incorrectly, or something became corrupt? It's not as though I reboot often, so I suppose I can wait until Intrepid before doing a clean install, but I would like to know if there is anything actually wrong that I can fix.

Revision history for this message
Collin Stocks (collinstocks) said : 		#7

I think I know what might have caused the problem initially, though not at all how to fix it.

A little while ago, my hard drive decided to sometimes stop working, so I got Dell to replace it. I won't go into the details of how I did this, but I essentially made a verbatim copy of the old device onto the new device since they were the same size media.

Anyway, it seemed to work, as it booted and passed fsck when I forced it to check the new disk. All the partitions were exactly the same; all my settings and files were perfect: my computer seemed not to notice that anything had changed.

Except now it hangs for way too long at boot. Any suggestions? Should I do a clean install of the operating system? Should I reinstall grub? Any ideas?

Revision history for this message
Launchpad Janitor (janitor) said : 		#8

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
Collin Stocks (collinstocks) said : 		#9

I did a clean install of my operating system, and that seems to have worked.

Revision history for this message
Collin Stocks (collinstocks) said : 		#10

Grrr... Launchpad wouldn't let me declare this problem solved before, so I have to post another message in order to do so.

Revision history for this message
marcobra (Marco Braida) (marcobra) said : 		#11

Collins here all your questions https://answers.launchpad.net/~collinstocks

hope this helps

Revision history for this message
Dotan Mazor (dotanmazor) said : 		#12

Just in case someone else will come over here, and might not want to re-install the system:

This issue can sometimes be caused by change in either UUID or in the location of the /dev/sda3 (or whatever the case may be). Since your drive has been replaced, I suspect that this is the case.

Hence, the /etc/fstab file stated a wrong UUID / device for a certain partition (probably the swap), and this caused the boot to hang.

The way to check the UUID number for the device /dev/sda3 is:

sudo vol_id /dev/sda3

Have the greatest day!
Dotan

Revision history for this message
Collin Stocks (collinstocks) said : 		#13

Thanks for your feedback, but I had already checked the UUID numbers in fstab. That was one of the things I did when reformatting my swap as suggested by one of the replies to my question.

By the way, Intrepid boots _much_ faster than Hardy did, though I rarely reboot anyway, and boot time is by no means a game-changer. Until I upgraded to Intrepid (clean install), I hadn't rebooted for 33 days, 14 hours and 37 minutes.