iwl3945 на ноутбуке HP Pavilion dv6236 EA

Ubuntu 8.04 все обновления стоят. Wi-Fi Intel 3945

При включении кнопки активации WiFi система начинает жутко тормозить и в логах вот такое пишет:

Jun 19 14:05:35 rapter kernel: [ 601.194193] CPU0 attaching NULL sched-domain.
Jun 19 14:05:35 rapter kernel: [ 601.194201] CPU1 attaching NULL sched-domain.
Jun 19 14:05:35 rapter kernel: [ 601.219976] CPU0 attaching sched-domain:
Jun 19 14:05:35 rapter kernel: [ 601.219987] domain 0: span 03
Jun 19 14:05:35 rapter kernel: [ 601.219992] groups: 01 02
Jun 19 14:05:35 rapter kernel: [ 601.219999] CPU1 attaching sched-domain:
Jun 19 14:05:35 rapter kernel: [ 601.220003] domain 0: span 03
Jun 19 14:05:35 rapter kernel: [ 601.220007] groups: 02 01
Jun 19 14:06:31 rapter kernel: [ 618.113120] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 19 14:06:32 rapter kernel: [ 619.073495] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jun 19 14:06:32 rapter kernel: [ 619.073501] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Jun 19 14:06:32 rapter kernel: [ 619.075593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 19 14:06:43 rapter kernel: [ 622.899377] eth0: no IPv6 routers present
Jun 19 14:08:08 rapter kernel: [ 648.105752] gdm[5700]: segfault at 10c05150 eip b77ab635 esp bfee7970 error 4
Jun 19 14:08:09 rapter kernel: [ 649.565611] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:08:54 rapter kernel: Inspecting /boot/System.map-2.6.24-16-generic
Jun 19 14:08:55 rapter kernel: Loaded 27704 symbols from /boot/System.map-2.6.24-16-generic.
Jun 19 14:08:55 rapter kernel: Symbols match kernel version 2.6.24.
Jun 19 14:08:55 rapter kernel: Loaded 20560 symbols from 94 modules.
Jun 19 14:08:55 rapter kernel: [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jun 19 14:08:55 rapter kernel: [ 0.000000] 126MB HIGHMEM available.
Jun 19 14:08:55 rapter kernel: [ 0.000000] 896MB LOWMEM available.
Jun 19 14:08:55 rapter kernel: [ 0.000000] found SMP MP-table at 000f7d10
Jun 19 14:08:55 rapter kernel: [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
Jun 19 14:08:55 rapter kernel: [ 0.000000] Zone PFN ranges:
Jun 19 14:08:55 rapter kernel: [ 0.000000] DMA 0 -> 4096
Jun 19 14:08:55 rapter kernel: [ 0.000000] Normal 4096 -> 229376
Jun 19 14:08:55 rapter kernel: [ 0.000000] HighMem 229376 -> 261744
Jun 19 14:08:55 rapter kernel: [ 0.000000] Movable zone start PFN for each node
Jun 19 14:08:55 rapter kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jun 19 14:08:55 rapter kernel: [ 0.000000] 0: 0 -> 261744
Jun 19 14:08:55 rapter kernel: [ 0.000000] On node 0 totalpages: 261744
Jun 19 14:08:55 rapter kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 19 14:08:55 rapter kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 19 14:08:55 rapter kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jun 19 14:08:55 rapter kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jun 19 14:08:55 rapter kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jun 19 14:08:55 rapter kernel: [ 0.000000] HighMem zone: 252 pages used for memmap
Jun 19 14:08:55 rapter kernel: [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
Jun 19 14:08:55 rapter kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 19 14:08:55 rapter kernel: [ 0.000000] DMI present.
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: XSDT 3FE7B3D3, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: FACP 3FE83BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: DSDT 3FE7C693, 74F1 (r1 HP 30BC 6040000 MSFT 100000E)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: FACS 3FE84FC0, 0040
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: APIC 3FE83CEC, 0068 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: HPET 3FE83D54, 0038 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: MCFG 3FE83D8C, 003C (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: TCPA 3FE83DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: APIC 3FE83DFA, 0068 (r1 HP 30BC 6040000 LTP 0)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: BOOT 3FE83E62, 0028 (r1 HP 30BC 6040000 LTP 1)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: SLIC 3FE83E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7C489, 020A (r1 HP 30BC 1000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B9E3, 025F (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B93D, 00A6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B457, 04E6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify <email address hidden>
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: DMI detected: Hewlett-Packard
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 19 14:08:55 rapter kernel: [ 0.000000] Processor #0 6:14 APIC version 20
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jun 19 14:08:55 rapter kernel: [ 0.000000] Processor #1 6:14 APIC version 20
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 19 14:08:55 rapter kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 19 14:08:55 rapter kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 19 14:08:55 rapter kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jun 19 14:08:55 rapter kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jun 19 14:08:55 rapter kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Jun 19 14:08:55 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Jun 19 14:08:55 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
Jun 19 14:08:55 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Jun 19 14:08:55 rapter kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259700
Jun 19 14:08:55 rapter kernel: [ 0.000000] Kernel command line: root=UUID=30f5286a-0833-4627-8a90-220d7a5d6093 ro quiet splash
Jun 19 14:08:55 rapter kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jun 19 14:08:55 rapter kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jun 19 14:08:55 rapter kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jun 19 14:08:55 rapter kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jun 19 14:08:55 rapter kernel: [ 0.000000] Initializing CPU#0
Jun 19 14:08:55 rapter kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 19 14:08:55 rapter kernel: [ 0.000000] Detected 1729.611 MHz processor.
Jun 19 14:08:55 rapter kernel: [ 10.133239] Console: colour VGA+ 80x25
Jun 19 14:08:55 rapter kernel: [ 10.133243] console [tty0] enabled
Jun 19 14:08:55 rapter kernel: [ 10.133540] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 19 14:08:55 rapter kernel: [ 10.133917] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 19 14:08:55 rapter kernel: [ 10.161468] Memory: 1025496k/1046976k available (2157k kernel code, 20816k reserved, 998k data, 364k init, 129472k highmem)
Jun 19 14:08:55 rapter kernel: [ 10.161476] virtual kernel memory layout:
Jun 19 14:08:55 rapter kernel: [ 10.161477] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Jun 19 14:08:55 rapter kernel: [ 10.161479] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 19 14:08:55 rapter kernel: [ 10.161480] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 19 14:08:55 rapter kernel: [ 10.161481] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 19 14:08:55 rapter kernel: [ 10.161482] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
Jun 19 14:08:55 rapter kernel: [ 10.161484] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
Jun 19 14:08:55 rapter kernel: [ 10.161485] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
Jun 19 14:08:55 rapter kernel: [ 10.161488] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 19 14:08:55 rapter kernel: [ 10.161521] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jun 19 14:08:55 rapter kernel: [ 10.161663] hpet clockevent registered
Jun 19 14:08:55 rapter kernel: [ 10.241660] Calibrating delay using timer specific routine.. 3463.15 BogoMIPS (lpj=6926317)
Jun 19 14:08:55 rapter kernel: [ 10.241682] Security Framework initialized
Jun 19 14:08:55 rapter kernel: [ 10.241688] SELinux: Disabled at boot.
Jun 19 14:08:55 rapter kernel: [ 10.241701] AppArmor: AppArmor initialized
Jun 19 14:08:55 rapter kernel: [ 10.241705] Failure registering capabilities with primary security module.
Jun 19 14:08:55 rapter kernel: [ 10.241713] Mount-cache hash table entries: 512
Jun 19 14:08:55 rapter kernel: [ 10.241827] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:08:55 rapter kernel: [ 10.241836] monitor/mwait feature present.
Jun 19 14:08:55 rapter kernel: [ 10.241838] using mwait in idle threads.
Jun 19 14:08:55 rapter kernel: [ 10.241842] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:08:55 rapter kernel: [ 10.241844] CPU: L2 cache: 2048K
Jun 19 14:08:55 rapter kernel: [ 10.241847] CPU: Physical Processor ID: 0
Jun 19 14:08:55 rapter kernel: [ 10.241849] CPU: Processor Core ID: 0
Jun 19 14:08:55 rapter kernel: [ 10.241851] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:08:55 rapter kernel: [ 10.241860] Compat vDSO mapped to ffffe000.
Jun 19 14:08:55 rapter kernel: [ 10.241871] Checking 'hlt' instruction... OK.
Jun 19 14:08:55 rapter kernel: [ 10.258043] SMP alternatives: switching to UP code
Jun 19 14:08:55 rapter kernel: [ 10.259819] Early unpacking initramfs... done
Jun 19 14:08:55 rapter kernel: [ 10.627978] ACPI: Core revision 20070126
Jun 19 14:08:55 rapter kernel: [ 10.628050] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jun 19 14:08:55 rapter kernel: [ 10.634262] CPU0: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:08:55 rapter kernel: [ 10.634279] SMP alternatives: switching to SMP code
Jun 19 14:08:55 rapter kernel: [ 10.634960] Booting processor 1/1 eip 3000
Jun 19 14:08:55 rapter kernel: [ 10.645198] Initializing CPU#1
Jun 19 14:08:55 rapter kernel: [ 10.725592] Calibrating delay using timer specific routine.. 3459.07 BogoMIPS (lpj=6918156)
Jun 19 14:08:55 rapter kernel: [ 10.725600] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:08:55 rapter kernel: [ 10.725605] monitor/mwait feature present.
Jun 19 14:08:55 rapter kernel: [ 10.725609] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:08:55 rapter kernel: [ 10.725610] CPU: L2 cache: 2048K
Jun 19 14:08:55 rapter kernel: [ 10.725613] CPU: Physical Processor ID: 0
Jun 19 14:08:55 rapter kernel: [ 10.725614] CPU: Processor Core ID: 1
Jun 19 14:08:55 rapter kernel: [ 10.725616] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:08:55 rapter kernel: [ 10.726126] CPU1: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:08:55 rapter kernel: [ 10.726150] Total of 2 processors activated (6922.23 BogoMIPS).
Jun 19 14:08:55 rapter kernel: [ 10.726348] ENABLING IO-APIC IRQs
Jun 19 14:08:55 rapter kernel: [ 10.726544] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 19 14:08:55 rapter kernel: [ 10.873692] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 19 14:08:55 rapter kernel: [ 10.893708] Brought up 2 CPUs
Jun 19 14:08:55 rapter kernel: [ 10.893735] CPU0 attaching sched-domain:
Jun 19 14:08:55 rapter kernel: [ 10.893738] domain 0: span 03
Jun 19 14:08:55 rapter kernel: [ 10.893740] groups: 01 02
Jun 19 14:08:55 rapter kernel: [ 10.893743] CPU1 attaching sched-domain:
Jun 19 14:08:55 rapter kernel: [ 10.893745] domain 0: span 03
Jun 19 14:08:55 rapter kernel: [ 10.893746] groups: 02 01
Jun 19 14:08:55 rapter kernel: [ 10.893999] net_namespace: 64 bytes
Jun 19 14:08:55 rapter kernel: [ 10.894009] Booting paravirtualized kernel on bare hardware
Jun 19 14:08:55 rapter kernel: [ 10.894503] Time: 7:08:34 Date: 06/19/08
Jun 19 14:08:55 rapter kernel: [ 10.894532] NET: Registered protocol family 16
Jun 19 14:08:55 rapter kernel: [ 10.894744] EISA bus registered
Jun 19 14:08:55 rapter kernel: [ 10.894749] ACPI: bus type pci registered
Jun 19 14:08:55 rapter kernel: [ 10.894969] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
Jun 19 14:08:55 rapter kernel: [ 10.894971] PCI: Using configuration type 1
Jun 19 14:08:55 rapter kernel: [ 10.894973] Setting up standard PCI resources
Jun 19 14:08:55 rapter kernel: [ 10.897526] ACPI: EC: Look up EC in DSDT
Jun 19 14:08:55 rapter kernel: [ 10.899928] ACPI: BIOS _OSI(Linux) query ignored via DMI
Jun 19 14:08:55 rapter kernel: [ 10.900375] ACPI: Interpreter enabled
Jun 19 14:08:55 rapter kernel: [ 10.900378] ACPI: (supports S0 S3 S4 S5)
Jun 19 14:08:55 rapter kernel: [ 10.900393] ACPI: Using IOAPIC for interrupt routing
Jun 19 14:08:55 rapter kernel: [ 10.901853] ACPI: EC: non-query interrupt received, switching to interrupt mode
Jun 19 14:08:55 rapter kernel: [ 10.906426] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jun 19 14:08:55 rapter kernel: [ 10.906429] ACPI: EC: driver started in interrupt mode
Jun 19 14:08:55 rapter kernel: [ 10.906476] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 19 14:08:55 rapter kernel: [ 10.907259] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jun 19 14:08:55 rapter kernel: [ 10.907263] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Jun 19 14:08:55 rapter kernel: [ 10.908770] PCI: Transparent bridge - 0000:00:1e.0
Jun 19 14:08:55 rapter kernel: [ 10.908817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.909127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.909263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.909389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.909513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.909650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jun 19 14:08:55 rapter kernel: [ 10.916377] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 19 14:08:55 rapter kernel: [ 10.916500] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
Jun 19 14:08:55 rapter kernel: [ 10.916621] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jun 19 14:08:55 rapter kernel: [ 10.916742] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jun 19 14:08:55 rapter kernel: [ 10.916861] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
Jun 19 14:08:55 rapter kernel: [ 10.916981] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
Jun 19 14:08:55 rapter kernel: [ 10.917103] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
Jun 19 14:08:55 rapter kernel: [ 10.917223] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
Jun 19 14:08:55 rapter kernel: [ 10.917367] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 19 14:08:55 rapter kernel: [ 10.917398] pnp: PnP ACPI init
Jun 19 14:08:55 rapter kernel: [ 10.917405] ACPI: bus type pnp registered
Jun 19 14:08:55 rapter kernel: [ 10.919769] pnp: PnP ACPI: found 11 devices
Jun 19 14:08:55 rapter kernel: [ 10.919772] ACPI: ACPI bus type pnp unregistered
Jun 19 14:08:55 rapter kernel: [ 10.919775] PnPBIOS: Disabled by ACPI PNP
Jun 19 14:08:55 rapter kernel: [ 10.920024] PCI: Using ACPI for IRQ routing
Jun 19 14:08:55 rapter kernel: [ 10.920026] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 19 14:08:55 rapter kernel: [ 10.965715] NET: Registered protocol family 8
Jun 19 14:08:55 rapter kernel: [ 10.965717] NET: Registered protocol family 20
Jun 19 14:08:55 rapter kernel: [ 10.965753] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 19 14:08:55 rapter kernel: [ 10.965757] hpet0: 3 64-bit timers, 14318180 Hz
Jun 19 14:08:55 rapter kernel: [ 10.966793] AppArmor: AppArmor Filesystem Enabled
Jun 19 14:08:55 rapter kernel: [ 10.969567] Time: tsc clocksource has been installed.
Jun 19 14:08:55 rapter kernel: [ 10.969582] Switched to high resolution mode on CPU 0
Jun 19 14:08:55 rapter kernel: [ 10.969694] Switched to high resolution mode on CPU 1
Jun 19 14:08:55 rapter kernel: [ 10.978563] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978570] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978573] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978577] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978580] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978583] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978586] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978590] system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978593] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978600] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jun 19 14:08:55 rapter kernel: [ 10.978607] system 00:06: ioport range 0x380-0x383 has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978610] system 00:06: ioport range 0x680-0x69f has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978613] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978616] system 00:06: ioport range 0x1000-0x107f has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978619] system 00:06: ioport range 0x1180-0x11bf has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978622] system 00:06: ioport range 0x1640-0x164f has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978629] system 00:07: ioport range 0x6a0-0x6af has been reserved
Jun 19 14:08:55 rapter kernel: [ 10.978632] system 00:07: ioport range 0x6b0-0x6ff has been reserved
Jun 19 14:08:55 rapter kernel: [ 11.009074] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Jun 19 14:08:55 rapter kernel: [ 11.009077] PCI: Bridge: 0000:00:01.0
Jun 19 14:08:55 rapter kernel: [ 11.009078] IO window: disabled.
Jun 19 14:08:55 rapter kernel: [ 11.009082] MEM window: dc000000-ddffffff
Jun 19 14:08:55 rapter kernel: [ 11.009086] PREFETCH window: c0000000-cfffffff
Jun 19 14:08:55 rapter kernel: [ 11.009089] PCI: Bridge: 0000:00:1c.0
Jun 19 14:08:55 rapter kernel: [ 11.009093] IO window: 2000-2fff
Jun 19 14:08:55 rapter kernel: [ 11.009098] MEM window: d8000000-d9ffffff
Jun 19 14:08:55 rapter kernel: [ 11.009103] PREFETCH window: d2000000-d3ffffff
Jun 19 14:08:55 rapter kernel: [ 11.009109] PCI: Bridge: 0000:00:1c.1
Jun 19 14:08:55 rapter kernel: [ 11.009112] IO window: 3000-3fff
Jun 19 14:08:55 rapter kernel: [ 11.009118] MEM window: d6000000-d7ffffff
Jun 19 14:08:55 rapter kernel: [ 11.009122] PREFETCH window: d0000000-d1ffffff
Jun 19 14:08:55 rapter kernel: [ 11.009128] PCI: Bridge: 0000:00:1c.2
Jun 19 14:08:55 rapter kernel: [ 11.009131] IO window: 4000-4fff
Jun 19 14:08:55 rapter kernel: [ 11.009137] MEM window: da000000-dbffffff
Jun 19 14:08:55 rapter kernel: [ 11.009142] PREFETCH window: d4000000-d5ffffff
Jun 19 14:08:55 rapter kernel: [ 11.009149] PCI: Bridge: 0000:00:1e.0
Jun 19 14:08:55 rapter kernel: [ 11.009150] IO window: disabled.
Jun 19 14:08:55 rapter kernel: [ 11.009156] MEM window: de000000-de0fffff
Jun 19 14:08:55 rapter kernel: [ 11.009160] PREFETCH window: disabled.
Jun 19 14:08:55 rapter kernel: [ 11.009179] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:08:55 rapter kernel: [ 11.009184] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:08:55 rapter kernel: [ 11.009208] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:08:55 rapter kernel: [ 11.009214] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:08:55 rapter kernel: [ 11.009238] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:08:55 rapter kernel: [ 11.009244] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:08:55 rapter kernel: [ 11.009268] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:08:55 rapter kernel: [ 11.009274] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:08:55 rapter kernel: [ 11.009286] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
Jun 19 14:08:55 rapter kernel: [ 11.009293] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 19 14:08:55 rapter kernel: [ 11.009304] NET: Registered protocol family 2
Jun 19 14:08:55 rapter kernel: [ 11.046581] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 19 14:08:55 rapter kernel: [ 11.046803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 19 14:08:55 rapter kernel: [ 11.047510] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 19 14:08:55 rapter kernel: [ 11.047863] TCP: Hash tables configured (established 131072 bind 65536)
Jun 19 14:08:55 rapter kernel: [ 11.047866] TCP reno registered
Jun 19 14:08:55 rapter kernel: [ 11.058667] checking if image is initramfs... it is
Jun 19 14:08:55 rapter kernel: [ 11.787252] Freeing initrd memory: 7677k freed
Jun 19 14:08:55 rapter kernel: [ 11.787423] Simple Boot Flag at 0x35 set to 0x1
Jun 19 14:08:55 rapter kernel: [ 11.788123] audit: initializing netlink socket (disabled)
Jun 19 14:08:55 rapter kernel: [ 11.788137] audit(1213859314.500:1): initialized
Jun 19 14:08:55 rapter kernel: [ 11.788337] highmem bounce pool size: 64 pages
Jun 19 14:08:55 rapter kernel: [ 11.790419] VFS: Disk quotas dquot_6.5.1
Jun 19 14:08:55 rapter kernel: [ 11.790508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 19 14:08:55 rapter kernel: [ 11.790653] io scheduler noop registered
Jun 19 14:08:55 rapter kernel: [ 11.790656] io scheduler anticipatory registered
Jun 19 14:08:55 rapter kernel: [ 11.790658] io scheduler deadline registered
Jun 19 14:08:55 rapter kernel: [ 11.790670] io scheduler cfq registered (default)
Jun 19 14:08:55 rapter kernel: [ 11.790773] Boot video device is 0000:01:00.0
Jun 19 14:08:55 rapter kernel: [ 11.790891] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:08:55 rapter kernel: [ 11.790928] assign_interrupt_mode Found MSI capability
Jun 19 14:08:55 rapter kernel: [ 11.790960] Allocate Port Service[0000:00:01.0:pcie00]
Jun 19 14:08:55 rapter kernel: [ 11.791042] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:08:55 rapter kernel: [ 11.791101] assign_interrupt_mode Found MSI capability
Jun 19 14:08:55 rapter kernel: [ 11.791147] Allocate Port Service[0000:00:1c.0:pcie00]
Jun 19 14:08:55 rapter kernel: [ 11.791182] Allocate Port Service[0000:00:1c.0:pcie02]
Jun 19 14:08:55 rapter kernel: [ 11.791286] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:08:55 rapter kernel: [ 11.791344] assign_interrupt_mode Found MSI capability
Jun 19 14:08:55 rapter kernel: [ 11.791391] Allocate Port Service[0000:00:1c.1:pcie00]
Jun 19 14:08:55 rapter kernel: [ 11.791425] Allocate Port Service[0000:00:1c.1:pcie02]
Jun 19 14:08:55 rapter kernel: [ 11.791528] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:08:55 rapter kernel: [ 11.791586] assign_interrupt_mode Found MSI capability
Jun 19 14:08:55 rapter kernel: [ 11.791633] Allocate Port Service[0000:00:1c.2:pcie00]
Jun 19 14:08:55 rapter kernel: [ 11.791669] Allocate Port Service[0000:00:1c.2:pcie02]
Jun 19 14:08:55 rapter kernel: [ 11.791949] isapnp: Scanning for PnP cards...
Jun 19 14:08:55 rapter kernel: [ 12.146443] isapnp: No Plug & Play device found
Jun 19 14:08:55 rapter kernel: [ 12.174982] Real Time Clock Driver v1.12ac
Jun 19 14:08:55 rapter kernel: [ 12.175198] hpet_resources: 0xfed00000 is busy
Jun 19 14:08:55 rapter kernel: [ 12.175227] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 19 14:08:55 rapter kernel: [ 12.176454] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 19 14:08:55 rapter kernel: [ 12.176525] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 19 14:08:55 rapter kernel: [ 12.176622] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 19 14:08:55 rapter kernel: [ 12.193096] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 19 14:08:55 rapter kernel: [ 12.193102] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 19 14:08:55 rapter kernel: [ 12.213472] mice: PS/2 mouse device common for all mice
Jun 19 14:08:55 rapter kernel: [ 12.213590] EISA: Probing bus 0 at eisa.0
Jun 19 14:08:55 rapter kernel: [ 12.213597] Cannot allocate resource for EISA slot 1
Jun 19 14:08:55 rapter kernel: [ 12.213600] Cannot allocate resource for EISA slot 2
Jun 19 14:08:55 rapter kernel: [ 12.213603] Cannot allocate resource for EISA slot 3
Jun 19 14:08:55 rapter kernel: [ 12.213605] Cannot allocate resource for EISA slot 4
Jun 19 14:08:55 rapter kernel: [ 12.213624] EISA: Detected 0 cards.
Jun 19 14:08:55 rapter kernel: [ 12.213627] cpuidle: using governor ladder
Jun 19 14:08:55 rapter kernel: [ 12.213629] cpuidle: using governor menu
Jun 19 14:08:55 rapter kernel: [ 12.213719] NET: Registered protocol family 1
Jun 19 14:08:55 rapter kernel: [ 12.213746] Using IPI No-Shortcut mode
Jun 19 14:08:55 rapter kernel: [ 12.213776] registered taskstats version 1
Jun 19 14:08:55 rapter kernel: [ 12.213890] Magic number: 12:232:117
Jun 19 14:08:55 rapter kernel: [ 12.213981] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jun 19 14:08:55 rapter kernel: [ 12.213983] EDD information not available.
Jun 19 14:08:55 rapter kernel: [ 12.214184] Freeing unused kernel memory: 364k freed
Jun 19 14:08:55 rapter kernel: [ 12.229413] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 19 14:08:55 rapter kernel: [ 13.438190] fuse init (API version 7.9)
Jun 19 14:08:55 rapter kernel: [ 13.459568] ACPI: SSDT 3FE7C189, 0238 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 13.459789] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP 30BC 3001 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 13.461957] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:08:55 rapter kernel: [ 13.461963] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 19 14:08:55 rapter kernel: [ 13.462204] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 13.462405] ACPI: SSDT 3FE7C104, 0085 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:08:55 rapter kernel: [ 13.463353] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:08:55 rapter kernel: [ 13.463359] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 19 14:08:55 rapter kernel: [ 13.467671] ACPI: Thermal Zone [THR1] (40 C)
Jun 19 14:08:55 rapter kernel: [ 13.940861] usbcore: registered new interface driver usbfs
Jun 19 14:08:55 rapter kernel: [ 13.940886] usbcore: registered new interface driver hub
Jun 19 14:08:55 rapter kernel: [ 13.940927] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Jun 19 14:08:55 rapter kernel: [ 13.940929] Copyright (c) 1999-2006 Intel Corporation.
Jun 19 14:08:55 rapter kernel: [ 13.941008] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:08:55 rapter kernel: [ 13.941025] PCI: Setting latency timer of device 0000:05:00.0 to 64
Jun 19 14:08:55 rapter kernel: [ 13.941094] usbcore: registered new device driver usb
Jun 19 14:08:55 rapter kernel: [ 13.964997] USB Universal Host Controller Interface driver v3.0
Jun 19 14:08:55 rapter kernel: [ 13.996934] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:e8:fa:65
Jun 19 14:08:55 rapter kernel: [ 14.033468] SCSI subsystem initialized
Jun 19 14:08:55 rapter kernel: [ 14.054724] libata version 3.00 loaded.
Jun 19 14:08:55 rapter kernel: [ 14.054881] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jun 19 14:08:55 rapter kernel: [ 14.054948] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:08:55 rapter kernel: [ 14.054960] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 19 14:08:55 rapter kernel: [ 14.054965] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 19 14:08:55 rapter kernel: [ 14.055220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 19 14:08:55 rapter kernel: [ 14.055257] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
Jun 19 14:08:55 rapter kernel: [ 14.055400] usb usb1: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 14.055428] hub 1-0:1.0: USB hub found
Jun 19 14:08:55 rapter kernel: [ 14.055433] hub 1-0:1.0: 2 ports detected
Jun 19 14:08:55 rapter kernel: [ 14.161291] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:08:55 rapter kernel: [ 14.161303] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 19 14:08:55 rapter kernel: [ 14.161308] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 19 14:08:55 rapter kernel: [ 14.161333] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 19 14:08:55 rapter kernel: [ 14.161368] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
Jun 19 14:08:55 rapter kernel: [ 14.161486] usb usb2: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 14.161512] hub 2-0:1.0: USB hub found
Jun 19 14:08:55 rapter kernel: [ 14.161517] hub 2-0:1.0: 2 ports detected
Jun 19 14:08:55 rapter kernel: [ 14.265269] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:08:55 rapter kernel: [ 14.265282] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 19 14:08:55 rapter kernel: [ 14.265287] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 19 14:08:55 rapter kernel: [ 14.265311] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 19 14:08:55 rapter kernel: [ 14.265346] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Jun 19 14:08:55 rapter kernel: [ 14.265466] usb usb3: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 14.265490] hub 3-0:1.0: USB hub found
Jun 19 14:08:55 rapter kernel: [ 14.265495] hub 3-0:1.0: 2 ports detected
Jun 19 14:08:55 rapter kernel: [ 14.369252] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:08:55 rapter kernel: [ 14.369264] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 19 14:08:55 rapter kernel: [ 14.369269] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 19 14:08:55 rapter kernel: [ 14.369293] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 19 14:08:55 rapter kernel: [ 14.369327] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Jun 19 14:08:55 rapter kernel: [ 14.369446] usb usb4: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 14.369471] hub 4-0:1.0: USB hub found
Jun 19 14:08:55 rapter kernel: [ 14.369476] hub 4-0:1.0: 2 ports detected
Jun 19 14:08:55 rapter kernel: [ 14.469737] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:08:55 rapter kernel: [ 14.469753] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 19 14:08:55 rapter kernel: [ 14.469758] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 19 14:08:55 rapter kernel: [ 14.469783] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 19 14:08:55 rapter kernel: [ 14.473690] ehci_hcd 0000:00:1d.7: debug port 1
Jun 19 14:08:55 rapter kernel: [ 14.473697] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jun 19 14:08:55 rapter kernel: [ 14.473704] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
Jun 19 14:08:55 rapter kernel: [ 14.502128] usb 2-1: new low speed USB device using uhci_hcd and address 2
Jun 19 14:08:55 rapter kernel: [ 14.513142] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 19 14:08:55 rapter kernel: [ 14.513344] usb usb5: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 14.513370] hub 5-0:1.0: USB hub found
Jun 19 14:08:55 rapter kernel: [ 14.513377] hub 5-0:1.0: 8 ports detected
Jun 19 14:08:55 rapter kernel: [ 14.617382] ahci 0000:00:1f.2: version 3.0
Jun 19 14:08:55 rapter kernel: [ 14.617411] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:08:55 rapter kernel: [ 14.617463] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
Jun 19 14:08:55 rapter kernel: [ 14.617466] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
Jun 19 14:08:55 rapter kernel: [ 14.785093] Clocksource tsc unstable (delta = -734313246 ns)
Jun 19 14:08:55 rapter kernel: [ 14.789289] Time: hpet clocksource has been installed.
Jun 19 14:08:55 rapter kernel: [ 14.873807] usb 5-4: new high speed USB device using ehci_hcd and address 3
Jun 19 14:08:55 rapter kernel: [ 15.009871] usb 5-4: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 15.175302] usb 2-1: new low speed USB device using uhci_hcd and address 3
Jun 19 14:08:55 rapter kernel: [ 15.201056] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
Jun 19 14:08:55 rapter kernel: [ 15.201066] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Jun 19 14:08:55 rapter kernel: [ 15.201076] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 19 14:08:55 rapter kernel: [ 15.201464] scsi0 : ahci
Jun 19 14:08:55 rapter kernel: [ 15.201690] scsi1 : ahci
Jun 19 14:08:55 rapter kernel: [ 15.201841] scsi2 : ahci
Jun 19 14:08:55 rapter kernel: [ 15.202000] scsi3 : ahci
Jun 19 14:08:55 rapter kernel: [ 15.202087] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
Jun 19 14:08:55 rapter kernel: [ 15.202091] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
Jun 19 14:08:55 rapter kernel: [ 15.202095] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
Jun 19 14:08:55 rapter kernel: [ 15.202099] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
Jun 19 14:08:55 rapter kernel: [ 15.222050] usb 2-1: configuration #1 chosen from 1 choice
Jun 19 14:08:55 rapter kernel: [ 15.240588] usbcore: registered new interface driver hiddev
Jun 19 14:08:55 rapter kernel: [ 15.247829] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
Jun 19 14:08:55 rapter kernel: [ 15.258149] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
Jun 19 14:08:55 rapter kernel: [ 15.258175] usbcore: registered new interface driver usbhid
Jun 19 14:08:55 rapter kernel: [ 15.258182] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jun 19 14:08:55 rapter kernel: [ 15.355548] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 19 14:08:55 rapter kernel: [ 15.356391] ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
Jun 19 14:08:55 rapter kernel: [ 15.356398] ata1.00: 312581808 sectors, multi 16: LBA48
Jun 19 14:08:55 rapter kernel: [ 15.357457] ata1.00: configured for UDMA/100
Jun 19 14:08:55 rapter kernel: [ 15.410437] ata2: SATA link down (SStatus 0 SControl 0)
Jun 19 14:08:55 rapter kernel: [ 15.460530] ata3: SATA link down (SStatus 0 SControl 300)
Jun 19 14:08:55 rapter kernel: [ 15.511422] ata4: SATA link down (SStatus 0 SControl 0)
Jun 19 14:08:55 rapter kernel: [ 15.511716] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
Jun 19 14:08:55 rapter kernel: [ 15.511890] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:08:55 rapter kernel: [ 15.511899] PCI: Setting latency timer of device 0000:07:05.0 to 64
Jun 19 14:08:55 rapter kernel: [ 15.564612] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Jun 19 14:08:55 rapter kernel: [ 15.569553] Driver 'sd' needs updating - please use bus_type methods
Jun 19 14:08:55 rapter kernel: [ 15.569627] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:08:55 rapter kernel: [ 15.569641] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:08:55 rapter kernel: [ 15.569643] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:08:55 rapter kernel: [ 15.569661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:08:55 rapter kernel: [ 15.569714] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:08:55 rapter kernel: [ 15.569724] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:08:55 rapter kernel: [ 15.569727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:08:55 rapter kernel: [ 15.569750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:08:55 rapter kernel: [ 15.569754] sda:<7>ata_piix 0000:00:1f.1: version 2.12
Jun 19 14:08:55 rapter kernel: [ 15.574395] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:08:55 rapter kernel: [ 15.574434] PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 19 14:08:55 rapter kernel: [ 15.575031] scsi4 : ata_piix
Jun 19 14:08:55 rapter kernel: [ 15.575460] scsi5 : ata_piix
Jun 19 14:08:55 rapter kernel: [ 15.575908] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
Jun 19 14:08:55 rapter kernel: [ 15.575911] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
Jun 19 14:08:55 rapter kernel: [ 15.588378] sda1 sda2 < sda5 >
Jun 19 14:08:55 rapter kernel: [ 15.618147] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 14:08:55 rapter kernel: [ 15.622362] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 14:08:55 rapter kernel: [ 15.845444] Attempting manual resume
Jun 19 14:08:55 rapter kernel: [ 15.845449] swsusp: Resume From Partition 8:5
Jun 19 14:08:55 rapter kernel: [ 15.845450] PM: Checking swsusp image.
Jun 19 14:08:55 rapter kernel: [ 15.845566] PM: Resume from disk failed.
Jun 19 14:08:55 rapter kernel: [ 15.898919] kjournald starting. Commit interval 5 seconds
Jun 19 14:08:55 rapter kernel: [ 15.898960] EXT3-fs: mounted filesystem with ordered data mode.
Jun 19 14:08:55 rapter kernel: [ 15.908742] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
Jun 19 14:08:55 rapter kernel: [ 16.095726] ata5.00: configured for MWDMA2
Jun 19 14:08:55 rapter kernel: [ 16.095815] ata6: port disabled. ignoring.
Jun 19 14:08:55 rapter kernel: [ 16.111703] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
Jun 19 14:08:55 rapter kernel: [ 16.111855] scsi 4:0:0:0: Attached scsi generic sg1 type 5
Jun 19 14:08:55 rapter kernel: [ 16.835570] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000e1ede700]
Jun 19 14:08:55 rapter kernel: [ 22.623223] Linux agpgart interface v0.102
Jun 19 14:08:55 rapter kernel: [ 22.667237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 19 14:08:55 rapter kernel: [ 22.720246] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 19 14:08:55 rapter kernel: [ 22.839415] input: Power Button (FF) as /devices/virtual/input/input3
Jun 19 14:08:55 rapter kernel: [ 22.871018] ACPI: Power Button (FF) [PWRF]
Jun 19 14:08:55 rapter kernel: [ 22.871104] input: Power Button (CM) as /devices/virtual/input/input4
Jun 19 14:08:55 rapter kernel: [ 22.902990] ACPI: Power Button (CM) [PWRB]
Jun 19 14:08:55 rapter kernel: [ 22.903064] input: Sleep Button (CM) as /devices/virtual/input/input5
Jun 19 14:08:55 rapter kernel: [ 22.934984] ACPI: Sleep Button (CM) [SLPB]
Jun 19 14:08:55 rapter kernel: [ 22.935061] input: Lid Switch as /devices/virtual/input/input6
Jun 19 14:08:55 rapter kernel: [ 22.935335] ACPI: Lid Switch [LID]
Jun 19 14:08:55 rapter kernel: [ 22.935669] ACPI: AC Adapter [ACAD] (on-line)
Jun 19 14:08:55 rapter kernel: [ 23.027706] ACPI: Battery Slot [BAT0] (battery present)
Jun 19 14:08:55 rapter kernel: [ 23.027805] ACPI: WMI-Acer: Mapper loaded
Jun 19 14:08:55 rapter kernel: [ 23.340990] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
Jun 19 14:08:55 rapter kernel: [ 23.370915] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jun 19 14:08:55 rapter kernel: [ 23.387570] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
Jun 19 14:08:55 rapter kernel: [ 23.406900] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jun 19 14:08:55 rapter kernel: [ 23.886974] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
Jun 19 14:08:55 rapter kernel: [ 23.887006] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 19 14:08:55 rapter kernel: [ 23.982992] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jun 19 14:08:55 rapter kernel: [ 23.982997] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Jun 19 14:08:55 rapter kernel: [ 24.013160] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
Jun 19 14:08:55 rapter kernel: [ 24.013164] iwl3945: Copyright(c) 2003-2007 Intel Corporation
Jun 19 14:08:55 rapter kernel: [ 24.013273] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:08:55 rapter kernel: [ 24.013288] PCI: Setting latency timer of device 0000:02:00.0 to 64
Jun 19 14:08:55 rapter kernel: [ 24.013310] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jun 19 14:08:55 rapter kernel: [ 24.066862] iTCO_vendor_support: vendor-support=0
Jun 19 14:08:55 rapter kernel: [ 24.086859] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jun 19 14:08:55 rapter kernel: [ 24.086995] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jun 19 14:08:55 rapter kernel: [ 24.087046] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 19 14:08:55 rapter kernel: [ 24.197804] intel_rng: FWH not detected
Jun 19 14:08:55 rapter kernel: [ 24.305065] ricoh-mmc: Ricoh MMC Controller disabling driver
Jun 19 14:08:55 rapter kernel: [ 24.305069] ricoh-mmc: Copyright(c) Philip Langdale
Jun 19 14:08:55 rapter kernel: [ 24.378048] sdhci: Secure Digital Host Controller Interface driver
Jun 19 14:08:55 rapter kernel: [ 24.378052] sdhci: Copyright(c) Pierre Ossman
Jun 19 14:08:55 rapter kernel: [ 24.677761] Linux video capture interface: v2.00
Jun 19 14:08:55 rapter kernel: [ 24.811553] NET: Registered protocol family 10
Jun 19 14:08:55 rapter kernel: [ 24.811771] lo: Disabled Privacy Extensions
Jun 19 14:08:55 rapter kernel: [ 24.880718] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
Jun 19 14:08:55 rapter kernel: [ 24.880975] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:08:55 rapter kernel: [ 24.881223] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:08:55 rapter kernel: [ 24.881226] uvcvideo: Failed to initialize the device (-5).
Jun 19 14:08:55 rapter kernel: [ 24.881247] usbcore: registered new interface driver uvcvideo
Jun 19 14:08:55 rapter kernel: [ 24.881251] USB Video Class driver (v0.1.0)
Jun 19 14:08:55 rapter kernel: [ 24.906845] input: PC Speaker as /devices/platform/pcspkr/input/input9
Jun 19 14:08:55 rapter kernel: [ 25.819072] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
Jun 19 14:08:55 rapter kernel: [ 25.882083] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Jun 19 14:08:55 rapter kernel: [ 25.925456] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
Jun 19 14:08:55 rapter kernel: [ 25.925471] ricoh-mmc: Controller is now disabled.
Jun 19 14:08:55 rapter kernel: [ 25.925585] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
Jun 19 14:08:55 rapter kernel: [ 25.925613] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
Jun 19 14:08:55 rapter kernel: [ 25.925620] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:08:55 rapter kernel: [ 25.925642] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Jun 19 14:08:55 rapter kernel: [ 25.925650] PCI: Setting latency timer of device 0000:07:05.1 to 64
Jun 19 14:08:55 rapter kernel: [ 25.925717] mmc0: SDHCI at 0xde000800 irq 17 DMA
Jun 19 14:08:55 rapter kernel: [ 25.996280] iwl3945: Radio Frequency Kill Switch is On:
Jun 19 14:08:55 rapter kernel: [ 25.996283] Kill switch must be turned off for wireless networking to work.
Jun 19 14:08:55 rapter kernel: [ 26.001453] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:08:55 rapter kernel: [ 26.011477] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:08:55 rapter kernel: [ 26.031446] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:08:55 rapter kernel: [ 26.058914] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:08:55 rapter kernel: [ 26.078894] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Jun 19 14:08:55 rapter kernel: [ 26.083196] Driver 'sr' needs updating - please use bus_type methods
Jun 19 14:08:55 rapter kernel: [ 26.162959] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 19 14:08:55 rapter kernel: [ 26.162965] Uniform CD-ROM driver Revision: 3.20
Jun 19 14:08:55 rapter kernel: [ 26.163023] sr 4:0:0:0: Attached scsi CD-ROM sr0
Jun 19 14:08:55 rapter kernel: [ 26.415360] lp: driver loaded but no devices found
Jun 19 14:08:55 rapter kernel: [ 26.542487] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
Jun 19 14:08:55 rapter kernel: [ 27.024037] EXT3 FS on sda1, internal journal
Jun 19 14:08:55 rapter kernel: [ 27.723813] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:08:55 rapter kernel: [ 28.116618] No dock devices found.
Jun 19 14:08:55 rapter kernel: [ 29.118394] apm: BIOS not found.
Jun 19 14:08:55 rapter kernel: [ 29.264821] ppdev: user-space parallel port driver
Jun 19 14:08:55 rapter kernel: [ 29.360646] audit(1213859335.629:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5222 profile="/usr/sbin/cupsd" namespace="default"
Jun 19 14:08:57 rapter kernel: [ 30.568380] Bluetooth: Core ver 2.11
Jun 19 14:08:57 rapter kernel: [ 30.568534] NET: Registered protocol family 31
Jun 19 14:08:57 rapter kernel: [ 30.568538] Bluetooth: HCI device and connection manager initialized
Jun 19 14:08:57 rapter kernel: [ 30.568546] Bluetooth: HCI socket layer initialized
Jun 19 14:08:57 rapter kernel: [ 30.603062] Bluetooth: L2CAP ver 2.9
Jun 19 14:08:57 rapter kernel: [ 30.603070] Bluetooth: L2CAP socket layer initialized
Jun 19 14:08:57 rapter kernel: [ 30.668038] Bluetooth: RFCOMM socket layer initialized
Jun 19 14:08:57 rapter kernel: [ 30.668050] Bluetooth: RFCOMM TTY layer initialized
Jun 19 14:08:57 rapter kernel: [ 30.668052] Bluetooth: RFCOMM ver 1.8
Jun 19 14:09:01 rapter kernel: [ 32.615579] eth0: no IPv6 routers present
Jun 19 14:09:22 rapter kernel: [ 47.991656] CPU0 attaching NULL sched-domain.
Jun 19 14:09:22 rapter kernel: [ 47.991666] CPU1 attaching NULL sched-domain.
Jun 19 14:09:22 rapter kernel: [ 48.015434] CPU0 attaching sched-domain:
Jun 19 14:09:22 rapter kernel: [ 48.015444] domain 0: span 03
Jun 19 14:09:22 rapter kernel: [ 48.015449] groups: 01 02
Jun 19 14:09:22 rapter kernel: [ 48.015456] CPU1 attaching sched-domain:
Jun 19 14:09:22 rapter kernel: [ 48.015460] domain 0: span 03
Jun 19 14:09:22 rapter kernel: [ 48.015464] groups: 02 01
Jun 19 14:35:57 rapter kernel: [ 990.738596] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:36:47 rapter kernel: Inspecting /boot/System.map-2.6.24-19-generic
Jun 19 14:36:47 rapter kernel: Loaded 27883 symbols from /boot/System.map-2.6.24-19-generic.
Jun 19 14:36:47 rapter kernel: Symbols match kernel version 2.6.24.
Jun 19 14:36:47 rapter kernel: Loaded 20565 symbols from 94 modules.
Jun 19 14:36:47 rapter kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jun 19 14:36:47 rapter kernel: [ 0.000000] Initializing cgroup subsys cpu
Jun 19 14:36:47 rapter kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jun 19 14:36:47 rapter kernel: [ 0.000000] 126MB HIGHMEM available.
Jun 19 14:36:47 rapter kernel: [ 0.000000] 896MB LOWMEM available.
Jun 19 14:36:47 rapter kernel: [ 0.000000] found SMP MP-table at 000f7d10
Jun 19 14:36:47 rapter kernel: [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
Jun 19 14:36:47 rapter kernel: [ 0.000000] Zone PFN ranges:
Jun 19 14:36:47 rapter kernel: [ 0.000000] DMA 0 -> 4096
Jun 19 14:36:47 rapter kernel: [ 0.000000] Normal 4096 -> 229376
Jun 19 14:36:47 rapter kernel: [ 0.000000] HighMem 229376 -> 261744
Jun 19 14:36:47 rapter kernel: [ 0.000000] Movable zone start PFN for each node
Jun 19 14:36:47 rapter kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jun 19 14:36:47 rapter kernel: [ 0.000000] 0: 0 -> 261744
Jun 19 14:36:47 rapter kernel: [ 0.000000] On node 0 totalpages: 261744
Jun 19 14:36:47 rapter kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 19 14:36:47 rapter kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 19 14:36:47 rapter kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jun 19 14:36:47 rapter kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jun 19 14:36:47 rapter kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jun 19 14:36:47 rapter kernel: [ 0.000000] HighMem zone: 252 pages used for memmap
Jun 19 14:36:47 rapter kernel: [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
Jun 19 14:36:47 rapter kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 19 14:36:47 rapter kernel: [ 0.000000] DMI present.
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: XSDT 3FE7B3D3, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: FACP 3FE83BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: DSDT 3FE7C693, 74F1 (r1 HP 30BC 6040000 MSFT 100000E)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: FACS 3FE84FC0, 0040
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: APIC 3FE83CEC, 0068 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: HPET 3FE83D54, 0038 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: MCFG 3FE83D8C, 003C (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: TCPA 3FE83DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: APIC 3FE83DFA, 0068 (r1 HP 30BC 6040000 LTP 0)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: BOOT 3FE83E62, 0028 (r1 HP 30BC 6040000 LTP 1)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: SLIC 3FE83E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7C489, 020A (r1 HP 30BC 1000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B9E3, 025F (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B93D, 00A6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B457, 04E6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify <email address hidden>
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: DMI detected: Hewlett-Packard
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 19 14:36:47 rapter kernel: [ 0.000000] Processor #0 6:14 APIC version 20
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jun 19 14:36:47 rapter kernel: [ 0.000000] Processor #1 6:14 APIC version 20
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 19 14:36:47 rapter kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 19 14:36:47 rapter kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 19 14:36:47 rapter kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jun 19 14:36:47 rapter kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jun 19 14:36:47 rapter kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Jun 19 14:36:47 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Jun 19 14:36:47 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
Jun 19 14:36:47 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Jun 19 14:36:47 rapter kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259700
Jun 19 14:36:47 rapter kernel: [ 0.000000] Kernel command line: root=UUID=30f5286a-0833-4627-8a90-220d7a5d6093 ro quiet splash
Jun 19 14:36:47 rapter kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jun 19 14:36:47 rapter kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jun 19 14:36:47 rapter kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jun 19 14:36:47 rapter kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jun 19 14:36:47 rapter kernel: [ 0.000000] Initializing CPU#0
Jun 19 14:36:47 rapter kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 19 14:36:47 rapter kernel: [ 0.000000] Detected 1729.591 MHz processor.
Jun 19 14:36:47 rapter kernel: [ 10.682112] Console: colour VGA+ 80x25
Jun 19 14:36:47 rapter kernel: [ 10.682116] console [tty0] enabled
Jun 19 14:36:47 rapter kernel: [ 10.682411] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 19 14:36:47 rapter kernel: [ 10.682786] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 19 14:36:47 rapter kernel: [ 10.710357] Memory: 1025848k/1046976k available (2177k kernel code, 20464k reserved, 1006k data, 368k init, 129472k highmem)
Jun 19 14:36:47 rapter kernel: [ 10.710365] virtual kernel memory layout:
Jun 19 14:36:47 rapter kernel: [ 10.710366] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Jun 19 14:36:47 rapter kernel: [ 10.710367] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 19 14:36:47 rapter kernel: [ 10.710369] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 19 14:36:47 rapter kernel: [ 10.710370] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 19 14:36:47 rapter kernel: [ 10.710371] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Jun 19 14:36:47 rapter kernel: [ 10.710372] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
Jun 19 14:36:47 rapter kernel: [ 10.710374] .text : 0xc0100000 - 0xc0320434 (2177 kB)
Jun 19 14:36:47 rapter kernel: [ 10.710377] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 19 14:36:47 rapter kernel: [ 10.710410] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jun 19 14:36:47 rapter kernel: [ 10.710553] hpet clockevent registered
Jun 19 14:36:47 rapter kernel: [ 10.790550] Calibrating delay using timer specific routine.. 3463.09 BogoMIPS (lpj=6926185)
Jun 19 14:36:47 rapter kernel: [ 10.790572] Security Framework initialized
Jun 19 14:36:47 rapter kernel: [ 10.790578] SELinux: Disabled at boot.
Jun 19 14:36:47 rapter kernel: [ 10.790592] AppArmor: AppArmor initialized
Jun 19 14:36:47 rapter kernel: [ 10.790596] Failure registering capabilities with primary security module.
Jun 19 14:36:47 rapter kernel: [ 10.790604] Mount-cache hash table entries: 512
Jun 19 14:36:47 rapter kernel: [ 10.790715] Initializing cgroup subsys ns
Jun 19 14:36:47 rapter kernel: [ 10.790719] Initializing cgroup subsys cpuacct
Jun 19 14:36:47 rapter kernel: [ 10.790729] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:36:47 rapter kernel: [ 10.790737] monitor/mwait feature present.
Jun 19 14:36:47 rapter kernel: [ 10.790738] using mwait in idle threads.
Jun 19 14:36:47 rapter kernel: [ 10.790743] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:36:47 rapter kernel: [ 10.790745] CPU: L2 cache: 2048K
Jun 19 14:36:47 rapter kernel: [ 10.790748] CPU: Physical Processor ID: 0
Jun 19 14:36:47 rapter kernel: [ 10.790749] CPU: Processor Core ID: 0
Jun 19 14:36:47 rapter kernel: [ 10.790752] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:36:47 rapter kernel: [ 10.790760] Compat vDSO mapped to ffffe000.
Jun 19 14:36:47 rapter kernel: [ 10.790773] Checking 'hlt' instruction... OK.
Jun 19 14:36:47 rapter kernel: [ 10.806941] SMP alternatives: switching to UP code
Jun 19 14:36:47 rapter kernel: [ 10.808729] Early unpacking initramfs... done
Jun 19 14:36:47 rapter kernel: [ 11.159200] ACPI: Core revision 20070126
Jun 19 14:36:47 rapter kernel: [ 11.159268] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jun 19 14:36:47 rapter kernel: [ 11.165481] CPU0: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:36:47 rapter kernel: [ 11.165498] SMP alternatives: switching to SMP code
Jun 19 14:36:47 rapter kernel: [ 11.166189] Booting processor 1/1 eip 3000
Jun 19 14:36:47 rapter kernel: [ 11.176423] Initializing CPU#1
Jun 19 14:36:47 rapter kernel: [ 11.254484] Calibrating delay using timer specific routine.. 3459.12 BogoMIPS (lpj=6918247)
Jun 19 14:36:47 rapter kernel: [ 11.254491] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:36:47 rapter kernel: [ 11.254497] monitor/mwait feature present.
Jun 19 14:36:47 rapter kernel: [ 11.254501] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:36:47 rapter kernel: [ 11.254502] CPU: L2 cache: 2048K
Jun 19 14:36:47 rapter kernel: [ 11.254505] CPU: Physical Processor ID: 0
Jun 19 14:36:47 rapter kernel: [ 11.254506] CPU: Processor Core ID: 1
Jun 19 14:36:47 rapter kernel: [ 11.254508] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:36:47 rapter kernel: [ 11.255062] CPU1: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:36:47 rapter kernel: [ 11.255086] Total of 2 processors activated (6922.21 BogoMIPS).
Jun 19 14:36:47 rapter kernel: [ 11.255285] ENABLING IO-APIC IRQs
Jun 19 14:36:47 rapter kernel: [ 11.255481] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 19 14:36:47 rapter kernel: [ 11.402587] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 19 14:36:47 rapter kernel: [ 11.422605] Brought up 2 CPUs
Jun 19 14:36:47 rapter kernel: [ 11.422631] CPU0 attaching sched-domain:
Jun 19 14:36:47 rapter kernel: [ 11.422634] domain 0: span 03
Jun 19 14:36:47 rapter kernel: [ 11.422636] groups: 01 02
Jun 19 14:36:47 rapter kernel: [ 11.422639] CPU1 attaching sched-domain:
Jun 19 14:36:47 rapter kernel: [ 11.422641] domain 0: span 03
Jun 19 14:36:47 rapter kernel: [ 11.422643] groups: 02 01
Jun 19 14:36:47 rapter kernel: [ 11.422898] net_namespace: 64 bytes
Jun 19 14:36:47 rapter kernel: [ 11.422908] Booting paravirtualized kernel on bare hardware
Jun 19 14:36:47 rapter kernel: [ 11.423377] Time: 7:36:24 Date: 06/19/08
Jun 19 14:36:47 rapter kernel: [ 11.423406] NET: Registered protocol family 16
Jun 19 14:36:47 rapter kernel: [ 11.423625] EISA bus registered
Jun 19 14:36:47 rapter kernel: [ 11.423629] ACPI: bus type pci registered
Jun 19 14:36:47 rapter kernel: [ 11.423851] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
Jun 19 14:36:47 rapter kernel: [ 11.423854] PCI: Using configuration type 1
Jun 19 14:36:47 rapter kernel: [ 11.423868] Setting up standard PCI resources
Jun 19 14:36:47 rapter kernel: [ 11.426440] ACPI: EC: Look up EC in DSDT
Jun 19 14:36:47 rapter kernel: [ 11.428829] ACPI: BIOS _OSI(Linux) query ignored via DMI
Jun 19 14:36:47 rapter kernel: [ 11.429275] ACPI: Interpreter enabled
Jun 19 14:36:47 rapter kernel: [ 11.429278] ACPI: (supports S0 S3 S4 S5)
Jun 19 14:36:47 rapter kernel: [ 11.429293] ACPI: Using IOAPIC for interrupt routing
Jun 19 14:36:47 rapter kernel: [ 11.430765] ACPI: EC: non-query interrupt received, switching to interrupt mode
Jun 19 14:36:47 rapter kernel: [ 11.435287] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jun 19 14:36:47 rapter kernel: [ 11.435290] ACPI: EC: driver started in interrupt mode
Jun 19 14:36:47 rapter kernel: [ 11.435340] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 19 14:36:47 rapter kernel: [ 11.436124] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jun 19 14:36:47 rapter kernel: [ 11.436129] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Jun 19 14:36:47 rapter kernel: [ 11.437647] PCI: Transparent bridge - 0000:00:1e.0
Jun 19 14:36:47 rapter kernel: [ 11.437694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.438000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.438136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.438261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.438384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.438524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jun 19 14:36:47 rapter kernel: [ 11.445007] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 19 14:36:47 rapter kernel: [ 11.445130] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
Jun 19 14:36:47 rapter kernel: [ 11.445250] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jun 19 14:36:47 rapter kernel: [ 11.445370] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jun 19 14:36:47 rapter kernel: [ 11.445490] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
Jun 19 14:36:47 rapter kernel: [ 11.445610] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
Jun 19 14:36:47 rapter kernel: [ 11.445731] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
Jun 19 14:36:47 rapter kernel: [ 11.445851] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
Jun 19 14:36:47 rapter kernel: [ 11.445997] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 19 14:36:47 rapter kernel: [ 11.446031] pnp: PnP ACPI init
Jun 19 14:36:47 rapter kernel: [ 11.446038] ACPI: bus type pnp registered
Jun 19 14:36:47 rapter kernel: [ 11.448416] pnp: PnP ACPI: found 11 devices
Jun 19 14:36:47 rapter kernel: [ 11.448419] ACPI: ACPI bus type pnp unregistered
Jun 19 14:36:47 rapter kernel: [ 11.448422] PnPBIOS: Disabled by ACPI PNP
Jun 19 14:36:47 rapter kernel: [ 11.448682] PCI: Using ACPI for IRQ routing
Jun 19 14:36:47 rapter kernel: [ 11.448685] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 19 14:36:47 rapter kernel: [ 11.498591] NET: Registered protocol family 8
Jun 19 14:36:47 rapter kernel: [ 11.498594] NET: Registered protocol family 20
Jun 19 14:36:47 rapter kernel: [ 11.498631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 19 14:36:47 rapter kernel: [ 11.498636] hpet0: 3 64-bit timers, 14318180 Hz
Jun 19 14:36:47 rapter kernel: [ 11.499672] AppArmor: AppArmor Filesystem Enabled
Jun 19 14:36:47 rapter kernel: [ 11.502460] Time: tsc clocksource has been installed.
Jun 19 14:36:47 rapter kernel: [ 11.502475] Switched to high resolution mode on CPU 0
Jun 19 14:36:47 rapter kernel: [ 11.502587] Switched to high resolution mode on CPU 1
Jun 19 14:36:47 rapter kernel: [ 11.515458] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515465] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515468] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515471] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515474] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515478] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515481] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515484] system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515487] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515494] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jun 19 14:36:47 rapter kernel: [ 11.515501] system 00:06: ioport range 0x380-0x383 has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515504] system 00:06: ioport range 0x680-0x69f has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515507] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515510] system 00:06: ioport range 0x1000-0x107f has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515513] system 00:06: ioport range 0x1180-0x11bf has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515516] system 00:06: ioport range 0x1640-0x164f has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515521] system 00:07: ioport range 0x6a0-0x6af has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.515524] system 00:07: ioport range 0x6b0-0x6ff has been reserved
Jun 19 14:36:47 rapter kernel: [ 11.545986] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Jun 19 14:36:47 rapter kernel: [ 11.545988] PCI: Bridge: 0000:00:01.0
Jun 19 14:36:47 rapter kernel: [ 11.545990] IO window: disabled.
Jun 19 14:36:47 rapter kernel: [ 11.545994] MEM window: dc000000-ddffffff
Jun 19 14:36:47 rapter kernel: [ 11.545997] PREFETCH window: c0000000-cfffffff
Jun 19 14:36:47 rapter kernel: [ 11.546001] PCI: Bridge: 0000:00:1c.0
Jun 19 14:36:47 rapter kernel: [ 11.546005] IO window: 2000-2fff
Jun 19 14:36:47 rapter kernel: [ 11.546011] MEM window: d8000000-d9ffffff
Jun 19 14:36:47 rapter kernel: [ 11.546015] PREFETCH window: d2000000-d3ffffff
Jun 19 14:36:47 rapter kernel: [ 11.546021] PCI: Bridge: 0000:00:1c.1
Jun 19 14:36:47 rapter kernel: [ 11.546024] IO window: 3000-3fff
Jun 19 14:36:47 rapter kernel: [ 11.546030] MEM window: d6000000-d7ffffff
Jun 19 14:36:47 rapter kernel: [ 11.546035] PREFETCH window: d0000000-d1ffffff
Jun 19 14:36:47 rapter kernel: [ 11.546041] PCI: Bridge: 0000:00:1c.2
Jun 19 14:36:47 rapter kernel: [ 11.546044] IO window: 4000-4fff
Jun 19 14:36:47 rapter kernel: [ 11.546050] MEM window: da000000-dbffffff
Jun 19 14:36:47 rapter kernel: [ 11.546055] PREFETCH window: d4000000-d5ffffff
Jun 19 14:36:47 rapter kernel: [ 11.546062] PCI: Bridge: 0000:00:1e.0
Jun 19 14:36:47 rapter kernel: [ 11.546063] IO window: disabled.
Jun 19 14:36:47 rapter kernel: [ 11.546069] MEM window: de000000-de0fffff
Jun 19 14:36:47 rapter kernel: [ 11.546073] PREFETCH window: disabled.
Jun 19 14:36:47 rapter kernel: [ 11.546092] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:36:47 rapter kernel: [ 11.546098] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:36:47 rapter kernel: [ 11.546122] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:36:47 rapter kernel: [ 11.546128] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:36:47 rapter kernel: [ 11.546151] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:36:47 rapter kernel: [ 11.546158] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:36:47 rapter kernel: [ 11.546182] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:36:47 rapter kernel: [ 11.546188] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:36:47 rapter kernel: [ 11.546199] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
Jun 19 14:36:47 rapter kernel: [ 11.546206] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 19 14:36:47 rapter kernel: [ 11.546217] NET: Registered protocol family 2
Jun 19 14:36:47 rapter kernel: [ 11.583472] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 19 14:36:47 rapter kernel: [ 11.583697] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 19 14:36:47 rapter kernel: [ 11.584403] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 19 14:36:47 rapter kernel: [ 11.584756] TCP: Hash tables configured (established 131072 bind 65536)
Jun 19 14:36:47 rapter kernel: [ 11.584758] TCP reno registered
Jun 19 14:36:47 rapter kernel: [ 11.595567] checking if image is initramfs... it is
Jun 19 14:36:47 rapter kernel: [ 12.290214] Freeing initrd memory: 7293k freed
Jun 19 14:36:47 rapter kernel: [ 12.290400] Simple Boot Flag at 0x35 set to 0x1
Jun 19 14:36:47 rapter kernel: [ 12.291116] audit: initializing netlink socket (disabled)
Jun 19 14:36:47 rapter kernel: [ 12.291129] audit(1213860984.456:1): initialized
Jun 19 14:36:47 rapter kernel: [ 12.291327] highmem bounce pool size: 64 pages
Jun 19 14:36:47 rapter kernel: [ 12.293410] VFS: Disk quotas dquot_6.5.1
Jun 19 14:36:47 rapter kernel: [ 12.293487] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 19 14:36:47 rapter kernel: [ 12.293626] io scheduler noop registered
Jun 19 14:36:47 rapter kernel: [ 12.293629] io scheduler anticipatory registered
Jun 19 14:36:47 rapter kernel: [ 12.293631] io scheduler deadline registered
Jun 19 14:36:47 rapter kernel: [ 12.293642] io scheduler cfq registered (default)
Jun 19 14:36:47 rapter kernel: [ 12.293757] Boot video device is 0000:01:00.0
Jun 19 14:36:47 rapter kernel: [ 12.293876] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:36:47 rapter kernel: [ 12.293913] assign_interrupt_mode Found MSI capability
Jun 19 14:36:47 rapter kernel: [ 12.293945] Allocate Port Service[0000:00:01.0:pcie00]
Jun 19 14:36:47 rapter kernel: [ 12.294028] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:36:47 rapter kernel: [ 12.294087] assign_interrupt_mode Found MSI capability
Jun 19 14:36:47 rapter kernel: [ 12.294134] Allocate Port Service[0000:00:1c.0:pcie00]
Jun 19 14:36:47 rapter kernel: [ 12.294171] Allocate Port Service[0000:00:1c.0:pcie02]
Jun 19 14:36:47 rapter kernel: [ 12.294280] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:36:47 rapter kernel: [ 12.294344] assign_interrupt_mode Found MSI capability
Jun 19 14:36:47 rapter kernel: [ 12.294391] Allocate Port Service[0000:00:1c.1:pcie00]
Jun 19 14:36:47 rapter kernel: [ 12.294428] Allocate Port Service[0000:00:1c.1:pcie02]
Jun 19 14:36:47 rapter kernel: [ 12.294536] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:36:47 rapter kernel: [ 12.294594] assign_interrupt_mode Found MSI capability
Jun 19 14:36:47 rapter kernel: [ 12.294641] Allocate Port Service[0000:00:1c.2:pcie00]
Jun 19 14:36:47 rapter kernel: [ 12.294677] Allocate Port Service[0000:00:1c.2:pcie02]
Jun 19 14:36:47 rapter kernel: [ 12.294954] isapnp: Scanning for PnP cards...
Jun 19 14:36:47 rapter kernel: [ 12.649421] isapnp: No Plug & Play device found
Jun 19 14:36:47 rapter kernel: [ 12.677911] Real Time Clock Driver v1.12ac
Jun 19 14:36:47 rapter kernel: [ 12.678149] hpet_resources: 0xfed00000 is busy
Jun 19 14:36:47 rapter kernel: [ 12.678177] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 19 14:36:47 rapter kernel: [ 12.679588] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 19 14:36:47 rapter kernel: [ 12.679659] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 19 14:36:47 rapter kernel: [ 12.679760] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 19 14:36:47 rapter kernel: [ 12.696315] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 19 14:36:47 rapter kernel: [ 12.696321] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 19 14:36:47 rapter kernel: [ 12.711359] mice: PS/2 mouse device common for all mice
Jun 19 14:36:47 rapter kernel: [ 12.711478] EISA: Probing bus 0 at eisa.0
Jun 19 14:36:47 rapter kernel: [ 12.711485] Cannot allocate resource for EISA slot 1
Jun 19 14:36:47 rapter kernel: [ 12.711488] Cannot allocate resource for EISA slot 2
Jun 19 14:36:47 rapter kernel: [ 12.711490] Cannot allocate resource for EISA slot 3
Jun 19 14:36:47 rapter kernel: [ 12.711493] Cannot allocate resource for EISA slot 4
Jun 19 14:36:47 rapter kernel: [ 12.711512] EISA: Detected 0 cards.
Jun 19 14:36:47 rapter kernel: [ 12.711515] cpuidle: using governor ladder
Jun 19 14:36:47 rapter kernel: [ 12.711517] cpuidle: using governor menu
Jun 19 14:36:47 rapter kernel: [ 12.711604] NET: Registered protocol family 1
Jun 19 14:36:47 rapter kernel: [ 12.711631] Using IPI No-Shortcut mode
Jun 19 14:36:47 rapter kernel: [ 12.711662] registered taskstats version 1
Jun 19 14:36:47 rapter kernel: [ 12.711779] Magic number: 12:747:622
Jun 19 14:36:47 rapter kernel: [ 12.711817] hash matches device ptybf
Jun 19 14:36:47 rapter kernel: [ 12.711871] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jun 19 14:36:47 rapter kernel: [ 12.711874] EDD information not available.
Jun 19 14:36:47 rapter kernel: [ 12.712077] Freeing unused kernel memory: 368k freed
Jun 19 14:36:47 rapter kernel: [ 12.723061] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 19 14:36:47 rapter kernel: [ 13.935479] fuse init (API version 7.9)
Jun 19 14:36:47 rapter kernel: [ 13.956267] ACPI: SSDT 3FE7C189, 0238 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 13.956491] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP 30BC 3001 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 13.958674] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:36:47 rapter kernel: [ 13.958680] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 19 14:36:47 rapter kernel: [ 13.958931] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 13.959137] ACPI: SSDT 3FE7C104, 0085 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:36:47 rapter kernel: [ 13.960077] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:36:47 rapter kernel: [ 13.960083] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 19 14:36:47 rapter kernel: [ 13.964366] ACPI: Thermal Zone [THR1] (46 C)
Jun 19 14:36:47 rapter kernel: [ 14.396995] usbcore: registered new interface driver usbfs
Jun 19 14:36:47 rapter kernel: [ 14.397020] usbcore: registered new interface driver hub
Jun 19 14:36:47 rapter kernel: [ 14.406104] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Jun 19 14:36:47 rapter kernel: [ 14.406107] Copyright (c) 1999-2006 Intel Corporation.
Jun 19 14:36:47 rapter kernel: [ 14.406180] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:36:47 rapter kernel: [ 14.406196] PCI: Setting latency timer of device 0000:05:00.0 to 64
Jun 19 14:36:47 rapter kernel: [ 14.409374] usbcore: registered new device driver usb
Jun 19 14:36:47 rapter kernel: [ 14.411142] USB Universal Host Controller Interface driver v3.0
Jun 19 14:36:47 rapter kernel: [ 14.464817] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:e8:fa:65
Jun 19 14:36:47 rapter kernel: [ 14.475929] SCSI subsystem initialized
Jun 19 14:36:47 rapter kernel: [ 14.511544] libata version 3.00 loaded.
Jun 19 14:36:47 rapter kernel: [ 14.526695] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jun 19 14:36:47 rapter kernel: [ 14.526827] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:36:47 rapter kernel: [ 14.526839] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 19 14:36:47 rapter kernel: [ 14.526844] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 19 14:36:47 rapter kernel: [ 14.527103] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 19 14:36:47 rapter kernel: [ 14.527139] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
Jun 19 14:36:47 rapter kernel: [ 14.527282] usb usb1: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 14.527310] hub 1-0:1.0: USB hub found
Jun 19 14:36:47 rapter kernel: [ 14.527315] hub 1-0:1.0: 2 ports detected
Jun 19 14:36:47 rapter kernel: [ 14.634154] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:36:47 rapter kernel: [ 14.634167] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 19 14:36:47 rapter kernel: [ 14.634172] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 19 14:36:47 rapter kernel: [ 14.634199] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 19 14:36:47 rapter kernel: [ 14.634232] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
Jun 19 14:36:47 rapter kernel: [ 14.634356] usb usb2: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 14.634381] hub 2-0:1.0: USB hub found
Jun 19 14:36:47 rapter kernel: [ 14.634386] hub 2-0:1.0: 2 ports detected
Jun 19 14:36:47 rapter kernel: [ 14.738133] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:36:47 rapter kernel: [ 14.738145] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 19 14:36:47 rapter kernel: [ 14.738150] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 19 14:36:47 rapter kernel: [ 14.738175] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 19 14:36:47 rapter kernel: [ 14.738208] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Jun 19 14:36:47 rapter kernel: [ 14.738325] usb usb3: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 14.738351] hub 3-0:1.0: USB hub found
Jun 19 14:36:47 rapter kernel: [ 14.738357] hub 3-0:1.0: 2 ports detected
Jun 19 14:36:47 rapter kernel: [ 14.842108] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:36:47 rapter kernel: [ 14.842121] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 19 14:36:47 rapter kernel: [ 14.842126] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 19 14:36:47 rapter kernel: [ 14.842150] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 19 14:36:47 rapter kernel: [ 14.842184] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Jun 19 14:36:47 rapter kernel: [ 14.842310] usb usb4: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 14.842335] hub 4-0:1.0: USB hub found
Jun 19 14:36:47 rapter kernel: [ 14.842341] hub 4-0:1.0: 2 ports detected
Jun 19 14:36:47 rapter kernel: [ 14.942619] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:36:47 rapter kernel: [ 14.942629] PCI: Setting latency timer of device 0000:07:05.0 to 64
Jun 19 14:36:47 rapter kernel: [ 14.942752] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:36:47 rapter kernel: [ 14.942763] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 19 14:36:47 rapter kernel: [ 14.942768] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 19 14:36:47 rapter kernel: [ 14.942795] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 19 14:36:47 rapter kernel: [ 14.946711] ehci_hcd 0000:00:1d.7: debug port 1
Jun 19 14:36:47 rapter kernel: [ 14.946718] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jun 19 14:36:47 rapter kernel: [ 14.946725] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
Jun 19 14:36:47 rapter kernel: [ 14.977985] usb 2-1: new low speed USB device using uhci_hcd and address 2
Jun 19 14:36:47 rapter kernel: [ 14.989978] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 19 14:36:47 rapter kernel: [ 14.990112] usb usb5: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 14.990139] hub 5-0:1.0: USB hub found
Jun 19 14:36:47 rapter kernel: [ 14.990146] hub 5-0:1.0: 8 ports detected
Jun 19 14:36:47 rapter kernel: [ 14.995340] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Jun 19 14:36:47 rapter kernel: [ 15.090241] ahci 0000:00:1f.2: version 3.0
Jun 19 14:36:47 rapter kernel: [ 15.090269] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:36:47 rapter kernel: [ 15.090317] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
Jun 19 14:36:47 rapter kernel: [ 15.090320] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
Jun 19 14:36:47 rapter kernel: [ 15.333947] Clocksource tsc unstable (delta = -848500084 ns)
Jun 19 14:36:47 rapter kernel: [ 15.337937] Time: hpet clocksource has been installed.
Jun 19 14:36:47 rapter kernel: [ 15.398230] usb 5-4: new high speed USB device using ehci_hcd and address 3
Jun 19 14:36:47 rapter kernel: [ 15.534228] usb 5-4: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 15.698703] usb 2-1: new low speed USB device using uhci_hcd and address 3
Jun 19 14:36:47 rapter kernel: [ 15.723193] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
Jun 19 14:36:47 rapter kernel: [ 15.723202] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Jun 19 14:36:47 rapter kernel: [ 15.723213] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 19 14:36:47 rapter kernel: [ 15.723597] scsi0 : ahci
Jun 19 14:36:47 rapter kernel: [ 15.723824] scsi1 : ahci
Jun 19 14:36:47 rapter kernel: [ 15.723972] scsi2 : ahci
Jun 19 14:36:47 rapter kernel: [ 15.724139] scsi3 : ahci
Jun 19 14:36:47 rapter kernel: [ 15.724225] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
Jun 19 14:36:47 rapter kernel: [ 15.724229] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
Jun 19 14:36:47 rapter kernel: [ 15.724233] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
Jun 19 14:36:47 rapter kernel: [ 15.724237] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
Jun 19 14:36:47 rapter kernel: [ 15.741352] usb 2-1: configuration #1 chosen from 1 choice
Jun 19 14:36:47 rapter kernel: [ 15.759533] usbcore: registered new interface driver hiddev
Jun 19 14:36:47 rapter kernel: [ 15.766314] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
Jun 19 14:36:47 rapter kernel: [ 15.771213] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
Jun 19 14:36:47 rapter kernel: [ 15.771239] usbcore: registered new interface driver usbhid
Jun 19 14:36:47 rapter kernel: [ 15.771245] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jun 19 14:36:47 rapter kernel: [ 15.801291] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000e1ede700]
Jun 19 14:36:47 rapter kernel: [ 15.866373] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 19 14:36:47 rapter kernel: [ 15.867232] ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
Jun 19 14:36:47 rapter kernel: [ 15.867238] ata1.00: 312581808 sectors, multi 16: LBA48
Jun 19 14:36:47 rapter kernel: [ 15.868303] ata1.00: configured for UDMA/100
Jun 19 14:36:47 rapter kernel: [ 15.918754] ata2: SATA link down (SStatus 0 SControl 0)
Jun 19 14:36:47 rapter kernel: [ 15.966441] ata3: SATA link down (SStatus 0 SControl 300)
Jun 19 14:36:47 rapter kernel: [ 16.016466] ata4: SATA link down (SStatus 0 SControl 0)
Jun 19 14:36:47 rapter kernel: [ 16.016759] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
Jun 19 14:36:47 rapter kernel: [ 16.017124] ata_piix 0000:00:1f.1: version 2.12
Jun 19 14:36:47 rapter kernel: [ 16.017142] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:36:47 rapter kernel: [ 16.017181] PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 19 14:36:47 rapter kernel: [ 16.017244] scsi4 : ata_piix
Jun 19 14:36:47 rapter kernel: [ 16.017390] scsi5 : ata_piix
Jun 19 14:36:47 rapter kernel: [ 16.017851] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
Jun 19 14:36:47 rapter kernel: [ 16.017854] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
Jun 19 14:36:47 rapter kernel: [ 16.025063] Driver 'sd' needs updating - please use bus_type methods
Jun 19 14:36:47 rapter kernel: [ 16.029093] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:36:47 rapter kernel: [ 16.029120] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:36:47 rapter kernel: [ 16.029126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:36:47 rapter kernel: [ 16.029163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:36:47 rapter kernel: [ 16.029253] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:36:47 rapter kernel: [ 16.029275] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:36:47 rapter kernel: [ 16.029281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:36:47 rapter kernel: [ 16.029317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:36:47 rapter kernel: [ 16.029324] sda: sda1 sda2 < sda5 >
Jun 19 14:36:47 rapter kernel: [ 16.073371] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 14:36:47 rapter kernel: [ 16.078183] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 14:36:47 rapter kernel: [ 16.291676] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
Jun 19 14:36:47 rapter kernel: [ 16.332797] Attempting manual resume
Jun 19 14:36:47 rapter kernel: [ 16.332801] swsusp: Resume From Partition 8:5
Jun 19 14:36:47 rapter kernel: [ 16.332803] PM: Checking swsusp image.
Jun 19 14:36:47 rapter kernel: [ 16.332935] PM: Resume from disk failed.
Jun 19 14:36:47 rapter kernel: [ 16.385959] kjournald starting. Commit interval 5 seconds
Jun 19 14:36:47 rapter kernel: [ 16.386001] EXT3-fs: mounted filesystem with ordered data mode.
Jun 19 14:36:47 rapter kernel: [ 16.476358] ata5.00: configured for MWDMA2
Jun 19 14:36:47 rapter kernel: [ 16.476447] ata6: port disabled. ignoring.
Jun 19 14:36:47 rapter kernel: [ 16.484926] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
Jun 19 14:36:47 rapter kernel: [ 16.485073] scsi 4:0:0:0: Attached scsi generic sg1 type 5
Jun 19 14:36:47 rapter kernel: [ 26.134543] Linux agpgart interface v0.102
Jun 19 14:36:47 rapter kernel: [ 26.340652] iTCO_vendor_support: vendor-support=0
Jun 19 14:36:47 rapter kernel: [ 26.391615] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jun 19 14:36:47 rapter kernel: [ 26.391707] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jun 19 14:36:47 rapter kernel: [ 26.391745] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 19 14:36:47 rapter kernel: [ 26.459708] input: PC Speaker as /devices/platform/pcspkr/input/input3
Jun 19 14:36:47 rapter kernel: [ 26.539639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 19 14:36:47 rapter kernel: [ 26.599634] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 19 14:36:47 rapter kernel: [ 26.647640] input: Power Button (FF) as /devices/virtual/input/input4
Jun 19 14:36:47 rapter kernel: [ 26.696505] ACPI: Power Button (FF) [PWRF]
Jun 19 14:36:47 rapter kernel: [ 26.696578] input: Power Button (CM) as /devices/virtual/input/input5
Jun 19 14:36:47 rapter kernel: [ 26.747508] intel_rng: FWH not detected
Jun 19 14:36:47 rapter kernel: [ 26.760547] ACPI: Power Button (CM) [PWRB]
Jun 19 14:36:47 rapter kernel: [ 26.760727] input: Sleep Button (CM) as /devices/virtual/input/input6
Jun 19 14:36:47 rapter kernel: [ 26.824491] ACPI: Sleep Button (CM) [SLPB]
Jun 19 14:36:47 rapter kernel: [ 26.824567] input: Lid Switch as /devices/virtual/input/input7
Jun 19 14:36:47 rapter kernel: [ 26.856740] ACPI: Lid Switch [LID]
Jun 19 14:36:47 rapter kernel: [ 26.859135] ACPI: AC Adapter [ACAD] (on-line)
Jun 19 14:36:47 rapter kernel: [ 26.918541] ACPI: Battery Slot [BAT0] (battery present)
Jun 19 14:36:47 rapter kernel: [ 26.918641] ACPI: WMI-Acer: Mapper loaded
Jun 19 14:36:47 rapter kernel: [ 26.999195] ricoh-mmc: Ricoh MMC Controller disabling driver
Jun 19 14:36:47 rapter kernel: [ 26.999200] ricoh-mmc: Copyright(c) Philip Langdale
Jun 19 14:36:47 rapter kernel: [ 26.999246] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
Jun 19 14:36:47 rapter kernel: [ 26.999260] ricoh-mmc: Controller is now disabled.
Jun 19 14:36:47 rapter kernel: [ 27.097930] sdhci: Secure Digital Host Controller Interface driver
Jun 19 14:36:47 rapter kernel: [ 27.097934] sdhci: Copyright(c) Pierre Ossman
Jun 19 14:36:47 rapter kernel: [ 27.097977] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
Jun 19 14:36:47 rapter kernel: [ 27.097996] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
Jun 19 14:36:47 rapter kernel: [ 27.098004] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:36:47 rapter kernel: [ 27.098024] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Jun 19 14:36:47 rapter kernel: [ 27.098032] PCI: Setting latency timer of device 0000:07:05.1 to 64
Jun 19 14:36:47 rapter kernel: [ 27.098080] mmc0: SDHCI at 0xde000800 irq 17 DMA
Jun 19 14:36:47 rapter kernel: [ 27.205971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
Jun 19 14:36:47 rapter kernel: [ 27.247423] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jun 19 14:36:47 rapter kernel: [ 27.249046] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
Jun 19 14:36:47 rapter kernel: [ 27.287418] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jun 19 14:36:47 rapter kernel: [ 27.724530] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jun 19 14:36:47 rapter kernel: [ 27.724535] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Jun 19 14:36:47 rapter kernel: [ 28.016037] Driver 'sr' needs updating - please use bus_type methods
Jun 19 14:36:47 rapter kernel: [ 28.117009] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 19 14:36:47 rapter kernel: [ 28.117015] Uniform CD-ROM driver Revision: 3.20
Jun 19 14:36:47 rapter kernel: [ 28.117073] sr 4:0:0:0: Attached scsi CD-ROM sr0
Jun 19 14:36:47 rapter kernel: [ 28.270960] Linux video capture interface: v2.00
Jun 19 14:36:47 rapter kernel: [ 28.331480] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
Jun 19 14:36:47 rapter kernel: [ 28.331485] iwl3945: Copyright(c) 2003-2007 Intel Corporation
Jun 19 14:36:47 rapter kernel: [ 28.331594] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:36:47 rapter kernel: [ 28.331610] PCI: Setting latency timer of device 0000:02:00.0 to 64
Jun 19 14:36:47 rapter kernel: [ 28.331633] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jun 19 14:36:47 rapter kernel: [ 28.401719] NET: Registered protocol family 10
Jun 19 14:36:47 rapter kernel: [ 28.401953] lo: Disabled Privacy Extensions
Jun 19 14:36:47 rapter kernel: [ 28.464458] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
Jun 19 14:36:47 rapter kernel: [ 28.464685] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:36:47 rapter kernel: [ 28.464934] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:36:47 rapter kernel: [ 28.464937] uvcvideo: Failed to initialize the device (-5).
Jun 19 14:36:47 rapter kernel: [ 28.464958] usbcore: registered new interface driver uvcvideo
Jun 19 14:36:47 rapter kernel: [ 28.464961] USB Video Class driver (v0.1.0)
Jun 19 14:36:47 rapter kernel: [ 28.520220] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
Jun 19 14:36:47 rapter kernel: [ 28.520252] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 19 14:36:47 rapter kernel: [ 28.848263] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
Jun 19 14:36:47 rapter kernel: [ 28.909632] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Jun 19 14:36:47 rapter kernel: [ 29.005889] iwl3945: Radio Frequency Kill Switch is On:
Jun 19 14:36:47 rapter kernel: [ 29.005891] Kill switch must be turned off for wireless networking to work.
Jun 19 14:36:47 rapter kernel: [ 29.011075] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:36:47 rapter kernel: [ 29.021099] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:36:47 rapter kernel: [ 29.041060] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:36:47 rapter kernel: [ 29.068538] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:36:47 rapter kernel: [ 29.088569] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Jun 19 14:36:47 rapter kernel: [ 29.327373] lp: driver loaded but no devices found
Jun 19 14:36:47 rapter kernel: [ 29.460040] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
Jun 19 14:36:47 rapter kernel: [ 29.940637] EXT3 FS on sda1, internal journal
Jun 19 14:36:47 rapter kernel: [ 30.655983] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:36:47 rapter kernel: [ 31.046678] No dock devices found.
Jun 19 14:36:48 rapter kernel: [ 32.070093] apm: BIOS not found.
Jun 19 14:36:48 rapter kernel: [ 32.206065] ppdev: user-space parallel port driver
Jun 19 14:36:48 rapter kernel: [ 32.306788] audit(1213861008.434:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5221 profile="/usr/sbin/cupsd" namespace="default"
Jun 19 14:36:50 rapter kernel: [ 33.599647] Bluetooth: Core ver 2.11
Jun 19 14:36:50 rapter kernel: [ 33.599801] NET: Registered protocol family 31
Jun 19 14:36:50 rapter kernel: [ 33.599806] Bluetooth: HCI device and connection manager initialized
Jun 19 14:36:50 rapter kernel: [ 33.599813] Bluetooth: HCI socket layer initialized
Jun 19 14:36:50 rapter kernel: [ 33.627582] Bluetooth: L2CAP ver 2.9
Jun 19 14:36:50 rapter kernel: [ 33.627592] Bluetooth: L2CAP socket layer initialized
Jun 19 14:36:50 rapter kernel: [ 33.703210] Bluetooth: RFCOMM socket layer initialized
Jun 19 14:36:50 rapter kernel: [ 33.703234] Bluetooth: RFCOMM TTY layer initialized
Jun 19 14:36:50 rapter kernel: [ 33.703238] Bluetooth: RFCOMM ver 1.8
Jun 19 14:36:54 rapter kernel: [ 35.873443] eth0: no IPv6 routers present
Jun 19 14:37:25 rapter kernel: [ 53.147504] CPU0 attaching NULL sched-domain.
Jun 19 14:37:25 rapter kernel: [ 53.147510] CPU1 attaching NULL sched-domain.
Jun 19 14:37:25 rapter kernel: [ 53.161066] CPU0 attaching sched-domain:
Jun 19 14:37:25 rapter kernel: [ 53.161075] domain 0: span 03
Jun 19 14:37:25 rapter kernel: [ 53.161079] groups: 01 02
Jun 19 14:37:25 rapter kernel: [ 53.161086] CPU1 attaching sched-domain:
Jun 19 14:37:25 rapter kernel: [ 53.161090] domain 0: span 03
Jun 19 14:37:25 rapter kernel: [ 53.161096] groups: 02 01
Jun 19 14:52:03 rapter kernel: [ 417.272701] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:52:52 rapter kernel: Inspecting /boot/System.map-2.6.24-19-generic
Jun 19 14:52:52 rapter kernel: Loaded 27883 symbols from /boot/System.map-2.6.24-19-generic.
Jun 19 14:52:52 rapter kernel: Symbols match kernel version 2.6.24.
Jun 19 14:52:52 rapter kernel: Loaded 20565 symbols from 94 modules.
Jun 19 14:52:52 rapter kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jun 19 14:52:52 rapter kernel: [ 0.000000] Initializing cgroup subsys cpu
Jun 19 14:52:52 rapter kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jun 19 14:52:52 rapter kernel: [ 0.000000] 126MB HIGHMEM available.
Jun 19 14:52:52 rapter kernel: [ 0.000000] 896MB LOWMEM available.
Jun 19 14:52:52 rapter kernel: [ 0.000000] found SMP MP-table at 000f7d10
Jun 19 14:52:52 rapter kernel: [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
Jun 19 14:52:52 rapter kernel: [ 0.000000] Zone PFN ranges:
Jun 19 14:52:52 rapter kernel: [ 0.000000] DMA 0 -> 4096
Jun 19 14:52:52 rapter kernel: [ 0.000000] Normal 4096 -> 229376
Jun 19 14:52:52 rapter kernel: [ 0.000000] HighMem 229376 -> 261744
Jun 19 14:52:52 rapter kernel: [ 0.000000] Movable zone start PFN for each node
Jun 19 14:52:52 rapter kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jun 19 14:52:52 rapter kernel: [ 0.000000] 0: 0 -> 261744
Jun 19 14:52:52 rapter kernel: [ 0.000000] On node 0 totalpages: 261744
Jun 19 14:52:52 rapter kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 19 14:52:52 rapter kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 19 14:52:52 rapter kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jun 19 14:52:52 rapter kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jun 19 14:52:52 rapter kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jun 19 14:52:52 rapter kernel: [ 0.000000] HighMem zone: 252 pages used for memmap
Jun 19 14:52:52 rapter kernel: [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
Jun 19 14:52:52 rapter kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 19 14:52:52 rapter kernel: [ 0.000000] DMI present.
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: XSDT 3FE7B3D3, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: FACP 3FE83BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: DSDT 3FE7C693, 74F1 (r1 HP 30BC 6040000 MSFT 100000E)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: FACS 3FE84FC0, 0040
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: APIC 3FE83CEC, 0068 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: HPET 3FE83D54, 0038 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: MCFG 3FE83D8C, 003C (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: TCPA 3FE83DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: APIC 3FE83DFA, 0068 (r1 HP 30BC 6040000 LTP 0)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: BOOT 3FE83E62, 0028 (r1 HP 30BC 6040000 LTP 1)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: SLIC 3FE83E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7C489, 020A (r1 HP 30BC 1000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B9E3, 025F (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B93D, 00A6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B457, 04E6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify <email address hidden>
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: DMI detected: Hewlett-Packard
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 19 14:52:52 rapter kernel: [ 0.000000] Processor #0 6:14 APIC version 20
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jun 19 14:52:52 rapter kernel: [ 0.000000] Processor #1 6:14 APIC version 20
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 19 14:52:52 rapter kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 19 14:52:52 rapter kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 19 14:52:52 rapter kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jun 19 14:52:52 rapter kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jun 19 14:52:52 rapter kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Jun 19 14:52:52 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Jun 19 14:52:52 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
Jun 19 14:52:52 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Jun 19 14:52:52 rapter kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259700
Jun 19 14:52:52 rapter kernel: [ 0.000000] Kernel command line: root=UUID=30f5286a-0833-4627-8a90-220d7a5d6093 ro quiet splash
Jun 19 14:52:52 rapter kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jun 19 14:52:52 rapter kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jun 19 14:52:52 rapter kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jun 19 14:52:52 rapter kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jun 19 14:52:52 rapter kernel: [ 0.000000] Initializing CPU#0
Jun 19 14:52:52 rapter kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 19 14:52:52 rapter kernel: [ 0.000000] Detected 1729.673 MHz processor.
Jun 19 14:52:52 rapter kernel: [ 9.926748] Console: colour VGA+ 80x25
Jun 19 14:52:52 rapter kernel: [ 9.926751] console [tty0] enabled
Jun 19 14:52:52 rapter kernel: [ 9.927046] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 19 14:52:52 rapter kernel: [ 9.927422] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 19 14:52:52 rapter kernel: [ 9.955004] Memory: 1025848k/1046976k available (2177k kernel code, 20464k reserved, 1006k data, 368k init, 129472k highmem)
Jun 19 14:52:52 rapter kernel: [ 9.955012] virtual kernel memory layout:
Jun 19 14:52:52 rapter kernel: [ 9.955013] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Jun 19 14:52:52 rapter kernel: [ 9.955014] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 19 14:52:52 rapter kernel: [ 9.955016] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 19 14:52:52 rapter kernel: [ 9.955017] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 19 14:52:52 rapter kernel: [ 9.955018] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Jun 19 14:52:52 rapter kernel: [ 9.955019] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
Jun 19 14:52:52 rapter kernel: [ 9.955021] .text : 0xc0100000 - 0xc0320434 (2177 kB)
Jun 19 14:52:52 rapter kernel: [ 9.955024] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 19 14:52:52 rapter kernel: [ 9.955057] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jun 19 14:52:52 rapter kernel: [ 9.955200] hpet clockevent registered
Jun 19 14:52:52 rapter kernel: [ 10.035197] Calibrating delay using timer specific routine.. 3463.12 BogoMIPS (lpj=6926251)
Jun 19 14:52:52 rapter kernel: [ 10.035218] Security Framework initialized
Jun 19 14:52:52 rapter kernel: [ 10.035225] SELinux: Disabled at boot.
Jun 19 14:52:52 rapter kernel: [ 10.035238] AppArmor: AppArmor initialized
Jun 19 14:52:52 rapter kernel: [ 10.035242] Failure registering capabilities with primary security module.
Jun 19 14:52:52 rapter kernel: [ 10.035250] Mount-cache hash table entries: 512
Jun 19 14:52:52 rapter kernel: [ 10.035360] Initializing cgroup subsys ns
Jun 19 14:52:52 rapter kernel: [ 10.035365] Initializing cgroup subsys cpuacct
Jun 19 14:52:52 rapter kernel: [ 10.035374] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:52:52 rapter kernel: [ 10.035382] monitor/mwait feature present.
Jun 19 14:52:52 rapter kernel: [ 10.035384] using mwait in idle threads.
Jun 19 14:52:52 rapter kernel: [ 10.035388] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:52:52 rapter kernel: [ 10.035391] CPU: L2 cache: 2048K
Jun 19 14:52:52 rapter kernel: [ 10.035393] CPU: Physical Processor ID: 0
Jun 19 14:52:52 rapter kernel: [ 10.035395] CPU: Processor Core ID: 0
Jun 19 14:52:52 rapter kernel: [ 10.035397] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:52:52 rapter kernel: [ 10.035406] Compat vDSO mapped to ffffe000.
Jun 19 14:52:52 rapter kernel: [ 10.035418] Checking 'hlt' instruction... OK.
Jun 19 14:52:52 rapter kernel: [ 10.051587] SMP alternatives: switching to UP code
Jun 19 14:52:52 rapter kernel: [ 10.053376] Early unpacking initramfs... done
Jun 19 14:52:52 rapter kernel: [ 10.403933] ACPI: Core revision 20070126
Jun 19 14:52:52 rapter kernel: [ 10.404001] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jun 19 14:52:52 rapter kernel: [ 10.410831] CPU0: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:52:52 rapter kernel: [ 10.410849] SMP alternatives: switching to SMP code
Jun 19 14:52:52 rapter kernel: [ 10.411555] Booting processor 1/1 eip 3000
Jun 19 14:52:52 rapter kernel: [ 10.421790] Initializing CPU#1
Jun 19 14:52:52 rapter kernel: [ 10.499131] Calibrating delay using timer specific routine.. 3459.09 BogoMIPS (lpj=6918199)
Jun 19 14:52:52 rapter kernel: [ 10.499138] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 14:52:52 rapter kernel: [ 10.499143] monitor/mwait feature present.
Jun 19 14:52:52 rapter kernel: [ 10.499147] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 14:52:52 rapter kernel: [ 10.499149] CPU: L2 cache: 2048K
Jun 19 14:52:52 rapter kernel: [ 10.499151] CPU: Physical Processor ID: 0
Jun 19 14:52:52 rapter kernel: [ 10.499152] CPU: Processor Core ID: 1
Jun 19 14:52:52 rapter kernel: [ 10.499154] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 14:52:52 rapter kernel: [ 10.499664] CPU1: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 14:52:52 rapter kernel: [ 10.499688] Total of 2 processors activated (6922.22 BogoMIPS).
Jun 19 14:52:52 rapter kernel: [ 10.499887] ENABLING IO-APIC IRQs
Jun 19 14:52:52 rapter kernel: [ 10.500082] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 19 14:52:52 rapter kernel: [ 10.647233] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 19 14:52:52 rapter kernel: [ 10.667253] Brought up 2 CPUs
Jun 19 14:52:52 rapter kernel: [ 10.667280] CPU0 attaching sched-domain:
Jun 19 14:52:52 rapter kernel: [ 10.667283] domain 0: span 03
Jun 19 14:52:52 rapter kernel: [ 10.667284] groups: 01 02
Jun 19 14:52:52 rapter kernel: [ 10.667288] CPU1 attaching sched-domain:
Jun 19 14:52:52 rapter kernel: [ 10.667290] domain 0: span 03
Jun 19 14:52:52 rapter kernel: [ 10.667291] groups: 02 01
Jun 19 14:52:52 rapter kernel: [ 10.667546] net_namespace: 64 bytes
Jun 19 14:52:52 rapter kernel: [ 10.667557] Booting paravirtualized kernel on bare hardware
Jun 19 14:52:52 rapter kernel: [ 10.668025] Time: 7:52:29 Date: 06/19/08
Jun 19 14:52:52 rapter kernel: [ 10.668055] NET: Registered protocol family 16
Jun 19 14:52:52 rapter kernel: [ 10.668271] EISA bus registered
Jun 19 14:52:52 rapter kernel: [ 10.668276] ACPI: bus type pci registered
Jun 19 14:52:52 rapter kernel: [ 10.668499] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
Jun 19 14:52:52 rapter kernel: [ 10.668501] PCI: Using configuration type 1
Jun 19 14:52:52 rapter kernel: [ 10.668515] Setting up standard PCI resources
Jun 19 14:52:52 rapter kernel: [ 10.671089] ACPI: EC: Look up EC in DSDT
Jun 19 14:52:52 rapter kernel: [ 10.673476] ACPI: BIOS _OSI(Linux) query ignored via DMI
Jun 19 14:52:52 rapter kernel: [ 10.673920] ACPI: Interpreter enabled
Jun 19 14:52:52 rapter kernel: [ 10.673923] ACPI: (supports S0 S3 S4 S5)
Jun 19 14:52:52 rapter kernel: [ 10.673938] ACPI: Using IOAPIC for interrupt routing
Jun 19 14:52:52 rapter kernel: [ 10.675412] ACPI: EC: non-query interrupt received, switching to interrupt mode
Jun 19 14:52:52 rapter kernel: [ 10.679972] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jun 19 14:52:52 rapter kernel: [ 10.679975] ACPI: EC: driver started in interrupt mode
Jun 19 14:52:52 rapter kernel: [ 10.680023] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 19 14:52:52 rapter kernel: [ 10.680809] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jun 19 14:52:52 rapter kernel: [ 10.680814] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Jun 19 14:52:52 rapter kernel: [ 10.682329] PCI: Transparent bridge - 0000:00:1e.0
Jun 19 14:52:52 rapter kernel: [ 10.682377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.682682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.682818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.682944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.683066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.683208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jun 19 14:52:52 rapter kernel: [ 10.689690] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 19 14:52:52 rapter kernel: [ 10.689813] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
Jun 19 14:52:52 rapter kernel: [ 10.689933] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jun 19 14:52:52 rapter kernel: [ 10.690053] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jun 19 14:52:52 rapter kernel: [ 10.690173] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
Jun 19 14:52:52 rapter kernel: [ 10.690293] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
Jun 19 14:52:52 rapter kernel: [ 10.690414] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
Jun 19 14:52:52 rapter kernel: [ 10.690534] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
Jun 19 14:52:52 rapter kernel: [ 10.690682] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 19 14:52:52 rapter kernel: [ 10.690715] pnp: PnP ACPI init
Jun 19 14:52:52 rapter kernel: [ 10.690722] ACPI: bus type pnp registered
Jun 19 14:52:52 rapter kernel: [ 10.693074] pnp: PnP ACPI: found 11 devices
Jun 19 14:52:52 rapter kernel: [ 10.693077] ACPI: ACPI bus type pnp unregistered
Jun 19 14:52:52 rapter kernel: [ 10.693080] PnPBIOS: Disabled by ACPI PNP
Jun 19 14:52:52 rapter kernel: [ 10.693342] PCI: Using ACPI for IRQ routing
Jun 19 14:52:52 rapter kernel: [ 10.693344] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 19 14:52:52 rapter kernel: [ 10.739281] NET: Registered protocol family 8
Jun 19 14:52:52 rapter kernel: [ 10.739284] NET: Registered protocol family 20
Jun 19 14:52:52 rapter kernel: [ 10.739323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 19 14:52:52 rapter kernel: [ 10.739327] hpet0: 3 64-bit timers, 14318180 Hz
Jun 19 14:52:52 rapter kernel: [ 10.740366] AppArmor: AppArmor Filesystem Enabled
Jun 19 14:52:52 rapter kernel: [ 10.743106] Time: tsc clocksource has been installed.
Jun 19 14:52:52 rapter kernel: [ 10.743121] Switched to high resolution mode on CPU 0
Jun 19 14:52:52 rapter kernel: [ 10.743236] Switched to high resolution mode on CPU 1
Jun 19 14:52:52 rapter kernel: [ 10.767106] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767113] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767116] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767120] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767123] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767126] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767129] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767132] system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767136] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767143] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jun 19 14:52:52 rapter kernel: [ 10.767149] system 00:06: ioport range 0x380-0x383 has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767152] system 00:06: ioport range 0x680-0x69f has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767155] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767158] system 00:06: ioport range 0x1000-0x107f has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767161] system 00:06: ioport range 0x1180-0x11bf has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767164] system 00:06: ioport range 0x1640-0x164f has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767169] system 00:07: ioport range 0x6a0-0x6af has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.767172] system 00:07: ioport range 0x6b0-0x6ff has been reserved
Jun 19 14:52:52 rapter kernel: [ 10.797642] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Jun 19 14:52:52 rapter kernel: [ 10.797645] PCI: Bridge: 0000:00:01.0
Jun 19 14:52:52 rapter kernel: [ 10.797646] IO window: disabled.
Jun 19 14:52:52 rapter kernel: [ 10.797650] MEM window: dc000000-ddffffff
Jun 19 14:52:52 rapter kernel: [ 10.797654] PREFETCH window: c0000000-cfffffff
Jun 19 14:52:52 rapter kernel: [ 10.797658] PCI: Bridge: 0000:00:1c.0
Jun 19 14:52:52 rapter kernel: [ 10.797661] IO window: 2000-2fff
Jun 19 14:52:52 rapter kernel: [ 10.797667] MEM window: d8000000-d9ffffff
Jun 19 14:52:52 rapter kernel: [ 10.797671] PREFETCH window: d2000000-d3ffffff
Jun 19 14:52:52 rapter kernel: [ 10.797678] PCI: Bridge: 0000:00:1c.1
Jun 19 14:52:52 rapter kernel: [ 10.797681] IO window: 3000-3fff
Jun 19 14:52:52 rapter kernel: [ 10.797687] MEM window: d6000000-d7ffffff
Jun 19 14:52:52 rapter kernel: [ 10.797691] PREFETCH window: d0000000-d1ffffff
Jun 19 14:52:52 rapter kernel: [ 10.797697] PCI: Bridge: 0000:00:1c.2
Jun 19 14:52:52 rapter kernel: [ 10.797701] IO window: 4000-4fff
Jun 19 14:52:52 rapter kernel: [ 10.797707] MEM window: da000000-dbffffff
Jun 19 14:52:52 rapter kernel: [ 10.797711] PREFETCH window: d4000000-d5ffffff
Jun 19 14:52:52 rapter kernel: [ 10.797718] PCI: Bridge: 0000:00:1e.0
Jun 19 14:52:52 rapter kernel: [ 10.797719] IO window: disabled.
Jun 19 14:52:52 rapter kernel: [ 10.797725] MEM window: de000000-de0fffff
Jun 19 14:52:52 rapter kernel: [ 10.797730] PREFETCH window: disabled.
Jun 19 14:52:52 rapter kernel: [ 10.797749] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:52:52 rapter kernel: [ 10.797754] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:52:52 rapter kernel: [ 10.797779] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:52:52 rapter kernel: [ 10.797785] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:52:52 rapter kernel: [ 10.797809] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:52:52 rapter kernel: [ 10.797815] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:52:52 rapter kernel: [ 10.797839] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:52:52 rapter kernel: [ 10.797845] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:52:52 rapter kernel: [ 10.797857] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
Jun 19 14:52:52 rapter kernel: [ 10.797863] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 19 14:52:52 rapter kernel: [ 10.797875] NET: Registered protocol family 2
Jun 19 14:52:52 rapter kernel: [ 10.844122] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 19 14:52:52 rapter kernel: [ 10.844343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 19 14:52:52 rapter kernel: [ 10.845053] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 19 14:52:52 rapter kernel: [ 10.845406] TCP: Hash tables configured (established 131072 bind 65536)
Jun 19 14:52:52 rapter kernel: [ 10.845408] TCP reno registered
Jun 19 14:52:52 rapter kernel: [ 10.856209] checking if image is initramfs... it is
Jun 19 14:52:52 rapter kernel: [ 11.551395] Freeing initrd memory: 7293k freed
Jun 19 14:52:52 rapter kernel: [ 11.551568] Simple Boot Flag at 0x35 set to 0x1
Jun 19 14:52:52 rapter kernel: [ 11.552301] audit: initializing netlink socket (disabled)
Jun 19 14:52:52 rapter kernel: [ 11.552320] audit(1213861949.473:1): initialized
Jun 19 14:52:52 rapter kernel: [ 11.552514] highmem bounce pool size: 64 pages
Jun 19 14:52:52 rapter kernel: [ 11.554631] VFS: Disk quotas dquot_6.5.1
Jun 19 14:52:52 rapter kernel: [ 11.554716] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 19 14:52:52 rapter kernel: [ 11.554858] io scheduler noop registered
Jun 19 14:52:52 rapter kernel: [ 11.554860] io scheduler anticipatory registered
Jun 19 14:52:52 rapter kernel: [ 11.554862] io scheduler deadline registered
Jun 19 14:52:52 rapter kernel: [ 11.554874] io scheduler cfq registered (default)
Jun 19 14:52:52 rapter kernel: [ 11.554988] Boot video device is 0000:01:00.0
Jun 19 14:52:52 rapter kernel: [ 11.555111] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 14:52:52 rapter kernel: [ 11.555148] assign_interrupt_mode Found MSI capability
Jun 19 14:52:52 rapter kernel: [ 11.555180] Allocate Port Service[0000:00:01.0:pcie00]
Jun 19 14:52:52 rapter kernel: [ 11.555264] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 14:52:52 rapter kernel: [ 11.555322] assign_interrupt_mode Found MSI capability
Jun 19 14:52:52 rapter kernel: [ 11.555369] Allocate Port Service[0000:00:1c.0:pcie00]
Jun 19 14:52:52 rapter kernel: [ 11.555405] Allocate Port Service[0000:00:1c.0:pcie02]
Jun 19 14:52:52 rapter kernel: [ 11.555509] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 14:52:52 rapter kernel: [ 11.555568] assign_interrupt_mode Found MSI capability
Jun 19 14:52:52 rapter kernel: [ 11.555614] Allocate Port Service[0000:00:1c.1:pcie00]
Jun 19 14:52:52 rapter kernel: [ 11.555651] Allocate Port Service[0000:00:1c.1:pcie02]
Jun 19 14:52:52 rapter kernel: [ 11.555758] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 14:52:52 rapter kernel: [ 11.555817] assign_interrupt_mode Found MSI capability
Jun 19 14:52:52 rapter kernel: [ 11.555863] Allocate Port Service[0000:00:1c.2:pcie00]
Jun 19 14:52:52 rapter kernel: [ 11.555900] Allocate Port Service[0000:00:1c.2:pcie02]
Jun 19 14:52:52 rapter kernel: [ 11.556186] isapnp: Scanning for PnP cards...
Jun 19 14:52:52 rapter kernel: [ 11.910543] isapnp: No Plug & Play device found
Jun 19 14:52:52 rapter kernel: [ 11.938843] Real Time Clock Driver v1.12ac
Jun 19 14:52:52 rapter kernel: [ 11.939086] hpet_resources: 0xfed00000 is busy
Jun 19 14:52:52 rapter kernel: [ 11.939114] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 19 14:52:52 rapter kernel: [ 11.940370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 19 14:52:52 rapter kernel: [ 11.940441] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 19 14:52:52 rapter kernel: [ 11.940543] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 19 14:52:52 rapter kernel: [ 11.956436] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 19 14:52:52 rapter kernel: [ 11.956441] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 19 14:52:52 rapter kernel: [ 11.968055] mice: PS/2 mouse device common for all mice
Jun 19 14:52:52 rapter kernel: [ 11.968176] EISA: Probing bus 0 at eisa.0
Jun 19 14:52:52 rapter kernel: [ 11.968183] Cannot allocate resource for EISA slot 1
Jun 19 14:52:52 rapter kernel: [ 11.968186] Cannot allocate resource for EISA slot 2
Jun 19 14:52:52 rapter kernel: [ 11.968188] Cannot allocate resource for EISA slot 3
Jun 19 14:52:52 rapter kernel: [ 11.968190] Cannot allocate resource for EISA slot 4
Jun 19 14:52:52 rapter kernel: [ 11.968210] EISA: Detected 0 cards.
Jun 19 14:52:52 rapter kernel: [ 11.968213] cpuidle: using governor ladder
Jun 19 14:52:52 rapter kernel: [ 11.968215] cpuidle: using governor menu
Jun 19 14:52:52 rapter kernel: [ 11.968301] NET: Registered protocol family 1
Jun 19 14:52:52 rapter kernel: [ 11.968329] Using IPI No-Shortcut mode
Jun 19 14:52:52 rapter kernel: [ 11.968361] registered taskstats version 1
Jun 19 14:52:52 rapter kernel: [ 11.968476] Magic number: 12:506:875
Jun 19 14:52:52 rapter kernel: [ 11.968568] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jun 19 14:52:52 rapter kernel: [ 11.968570] EDD information not available.
Jun 19 14:52:52 rapter kernel: [ 11.968774] Freeing unused kernel memory: 368k freed
Jun 19 14:52:52 rapter kernel: [ 11.979991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 19 14:52:52 rapter kernel: [ 13.191786] fuse init (API version 7.9)
Jun 19 14:52:52 rapter kernel: [ 13.212582] ACPI: SSDT 3FE7C189, 0238 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 13.212806] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP 30BC 3001 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 13.214964] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:52:52 rapter kernel: [ 13.214969] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 19 14:52:52 rapter kernel: [ 13.215217] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 13.215422] ACPI: SSDT 3FE7C104, 0085 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 14:52:52 rapter kernel: [ 13.216381] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 14:52:52 rapter kernel: [ 13.216386] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 19 14:52:52 rapter kernel: [ 13.220910] ACPI: Thermal Zone [THR1] (40 C)
Jun 19 14:52:52 rapter kernel: [ 13.625662] usbcore: registered new interface driver usbfs
Jun 19 14:52:52 rapter kernel: [ 13.625689] usbcore: registered new interface driver hub
Jun 19 14:52:52 rapter kernel: [ 13.625716] usbcore: registered new device driver usb
Jun 19 14:52:52 rapter kernel: [ 13.626867] USB Universal Host Controller Interface driver v3.0
Jun 19 14:52:52 rapter kernel: [ 13.626922] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:52:52 rapter kernel: [ 13.626933] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 19 14:52:52 rapter kernel: [ 13.626938] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 19 14:52:52 rapter kernel: [ 13.627202] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 19 14:52:52 rapter kernel: [ 13.627237] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
Jun 19 14:52:52 rapter kernel: [ 13.627380] usb usb1: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 13.627404] hub 1-0:1.0: USB hub found
Jun 19 14:52:52 rapter kernel: [ 13.627409] hub 1-0:1.0: 2 ports detected
Jun 19 14:52:52 rapter kernel: [ 13.679828] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Jun 19 14:52:52 rapter kernel: [ 13.679837] Copyright (c) 1999-2006 Intel Corporation.
Jun 19 14:52:52 rapter kernel: [ 13.727968] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:52:52 rapter kernel: [ 13.727982] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 19 14:52:52 rapter kernel: [ 13.727986] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 19 14:52:52 rapter kernel: [ 13.728010] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 19 14:52:52 rapter kernel: [ 13.728045] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
Jun 19 14:52:52 rapter kernel: [ 13.728162] usb usb2: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 13.728186] hub 2-0:1.0: USB hub found
Jun 19 14:52:52 rapter kernel: [ 13.728192] hub 2-0:1.0: 2 ports detected
Jun 19 14:52:52 rapter kernel: [ 13.776840] SCSI subsystem initialized
Jun 19 14:52:52 rapter kernel: [ 13.784895] libata version 3.00 loaded.
Jun 19 14:52:52 rapter kernel: [ 13.831924] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:52:52 rapter kernel: [ 13.831937] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 19 14:52:52 rapter kernel: [ 13.831942] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 19 14:52:52 rapter kernel: [ 13.831967] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 19 14:52:52 rapter kernel: [ 13.832002] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Jun 19 14:52:52 rapter kernel: [ 13.832124] usb usb3: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 13.832149] hub 3-0:1.0: USB hub found
Jun 19 14:52:52 rapter kernel: [ 13.832154] hub 3-0:1.0: 2 ports detected
Jun 19 14:52:52 rapter kernel: [ 13.935932] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:52:52 rapter kernel: [ 13.935945] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 19 14:52:52 rapter kernel: [ 13.935949] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 19 14:52:52 rapter kernel: [ 13.935973] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 19 14:52:52 rapter kernel: [ 13.936007] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Jun 19 14:52:52 rapter kernel: [ 13.936124] usb usb4: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 13.936147] hub 4-0:1.0: USB hub found
Jun 19 14:52:52 rapter kernel: [ 13.936152] hub 4-0:1.0: 2 ports detected
Jun 19 14:52:52 rapter kernel: [ 14.040066] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:52:52 rapter kernel: [ 14.040083] PCI: Setting latency timer of device 0000:05:00.0 to 64
Jun 19 14:52:52 rapter kernel: [ 14.074830] usb 2-1: new low speed USB device using uhci_hcd and address 2
Jun 19 14:52:52 rapter kernel: [ 14.098547] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:e8:fa:65
Jun 19 14:52:52 rapter kernel: [ 14.156451] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jun 19 14:52:52 rapter kernel: [ 14.157259] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 14:52:52 rapter kernel: [ 14.157273] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 19 14:52:52 rapter kernel: [ 14.157277] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 19 14:52:52 rapter kernel: [ 14.157308] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 19 14:52:52 rapter kernel: [ 14.161210] ehci_hcd 0000:00:1d.7: debug port 1
Jun 19 14:52:52 rapter kernel: [ 14.161218] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jun 19 14:52:52 rapter kernel: [ 14.161225] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
Jun 19 14:52:52 rapter kernel: [ 14.203804] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 19 14:52:52 rapter kernel: [ 14.203942] usb usb5: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 14.203968] hub 5-0:1.0: USB hub found
Jun 19 14:52:52 rapter kernel: [ 14.203975] hub 5-0:1.0: 8 ports detected
Jun 19 14:52:52 rapter kernel: [ 14.308083] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:52:52 rapter kernel: [ 14.308091] PCI: Setting latency timer of device 0000:07:05.0 to 64
Jun 19 14:52:52 rapter kernel: [ 14.360804] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Jun 19 14:52:52 rapter kernel: [ 14.364888] ahci 0000:00:1f.2: version 3.0
Jun 19 14:52:52 rapter kernel: [ 14.364912] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 14:52:52 rapter kernel: [ 14.364963] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
Jun 19 14:52:52 rapter kernel: [ 14.364965] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
Jun 19 14:52:52 rapter kernel: [ 14.578778] Clocksource tsc unstable (delta = -959776906 ns)
Jun 19 14:52:52 rapter kernel: [ 14.584050] Time: hpet clocksource has been installed.
Jun 19 14:52:52 rapter kernel: [ 14.587925] usb 2-1: device not accepting address 2, error -71
Jun 19 14:52:52 rapter kernel: [ 14.720370] usb 5-4: new high speed USB device using ehci_hcd and address 3
Jun 19 14:52:52 rapter kernel: [ 14.856423] usb 5-4: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 14.881401] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
Jun 19 14:52:52 rapter kernel: [ 14.881411] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Jun 19 14:52:52 rapter kernel: [ 14.881420] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 19 14:52:52 rapter kernel: [ 14.881794] scsi0 : ahci
Jun 19 14:52:52 rapter kernel: [ 14.881994] scsi1 : ahci
Jun 19 14:52:52 rapter kernel: [ 14.882157] scsi2 : ahci
Jun 19 14:52:52 rapter kernel: [ 14.882300] scsi3 : ahci
Jun 19 14:52:52 rapter kernel: [ 14.882387] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
Jun 19 14:52:52 rapter kernel: [ 14.882391] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
Jun 19 14:52:52 rapter kernel: [ 14.882395] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
Jun 19 14:52:52 rapter kernel: [ 14.882398] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
Jun 19 14:52:52 rapter kernel: [ 15.018547] usb 2-1: new low speed USB device using uhci_hcd and address 4
Jun 19 14:52:52 rapter kernel: [ 15.032052] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000e1ede700]
Jun 19 14:52:52 rapter kernel: [ 15.079180] usb 2-1: configuration #1 chosen from 1 choice
Jun 19 14:52:52 rapter kernel: [ 15.097480] usbcore: registered new interface driver hiddev
Jun 19 14:52:52 rapter kernel: [ 15.103764] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
Jun 19 14:52:52 rapter kernel: [ 15.109520] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
Jun 19 14:52:52 rapter kernel: [ 15.109546] usbcore: registered new interface driver usbhid
Jun 19 14:52:52 rapter kernel: [ 15.109553] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jun 19 14:52:52 rapter kernel: [ 15.126747] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 19 14:52:52 rapter kernel: [ 15.127600] ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
Jun 19 14:52:52 rapter kernel: [ 15.127607] ata1.00: 312581808 sectors, multi 16: LBA48
Jun 19 14:52:52 rapter kernel: [ 15.128669] ata1.00: configured for UDMA/100
Jun 19 14:52:52 rapter kernel: [ 15.181011] ata2: SATA link down (SStatus 0 SControl 0)
Jun 19 14:52:52 rapter kernel: [ 15.230740] ata3: SATA link down (SStatus 0 SControl 300)
Jun 19 14:52:52 rapter kernel: [ 15.282081] ata4: SATA link down (SStatus 0 SControl 0)
Jun 19 14:52:52 rapter kernel: [ 15.282374] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
Jun 19 14:52:52 rapter kernel: [ 15.286972] ata_piix 0000:00:1f.1: version 2.12
Jun 19 14:52:52 rapter kernel: [ 15.286992] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 14:52:52 rapter kernel: [ 15.287031] PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 19 14:52:52 rapter kernel: [ 15.287429] scsi4 : ata_piix
Jun 19 14:52:52 rapter kernel: [ 15.291166] scsi5 : ata_piix
Jun 19 14:52:52 rapter kernel: [ 15.291651] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
Jun 19 14:52:52 rapter kernel: [ 15.291654] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
Jun 19 14:52:52 rapter kernel: [ 15.291846] Driver 'sd' needs updating - please use bus_type methods
Jun 19 14:52:52 rapter kernel: [ 15.294971] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:52:52 rapter kernel: [ 15.294998] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:52:52 rapter kernel: [ 15.295004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:52:52 rapter kernel: [ 15.295041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:52:52 rapter kernel: [ 15.295139] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 14:52:52 rapter kernel: [ 15.295162] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:52:52 rapter kernel: [ 15.295167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 14:52:52 rapter kernel: [ 15.295204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:52:52 rapter kernel: [ 15.295212] sda: sda1 sda2 < sda5 >
Jun 19 14:52:52 rapter kernel: [ 15.340827] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 14:52:52 rapter kernel: [ 15.344999] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 14:52:52 rapter kernel: [ 15.563874] Attempting manual resume
Jun 19 14:52:52 rapter kernel: [ 15.563878] swsusp: Resume From Partition 8:5
Jun 19 14:52:52 rapter kernel: [ 15.563879] PM: Checking swsusp image.
Jun 19 14:52:52 rapter kernel: [ 15.564009] PM: Resume from disk failed.
Jun 19 14:52:52 rapter kernel: [ 15.617655] kjournald starting. Commit interval 5 seconds
Jun 19 14:52:52 rapter kernel: [ 15.617681] EXT3-fs: mounted filesystem with ordered data mode.
Jun 19 14:52:52 rapter kernel: [ 15.626335] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
Jun 19 14:52:52 rapter kernel: [ 15.814290] ata5.00: configured for MWDMA2
Jun 19 14:52:52 rapter kernel: [ 15.814380] ata6: port disabled. ignoring.
Jun 19 14:52:52 rapter kernel: [ 15.822896] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
Jun 19 14:52:52 rapter kernel: [ 15.823044] scsi 4:0:0:0: Attached scsi generic sg1 type 5
Jun 19 14:52:52 rapter kernel: [ 25.351219] Linux agpgart interface v0.102
Jun 19 14:52:52 rapter kernel: [ 25.423239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 19 14:52:52 rapter kernel: [ 25.461564] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 19 14:52:52 rapter kernel: [ 25.499074] iTCO_vendor_support: vendor-support=0
Jun 19 14:52:52 rapter kernel: [ 25.513360] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jun 19 14:52:52 rapter kernel: [ 25.513442] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jun 19 14:52:52 rapter kernel: [ 25.513479] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 19 14:52:52 rapter kernel: [ 25.623270] input: PC Speaker as /devices/platform/pcspkr/input/input3
Jun 19 14:52:52 rapter kernel: [ 25.718051] input: Power Button (FF) as /devices/virtual/input/input4
Jun 19 14:52:52 rapter kernel: [ 25.763451] ACPI: Power Button (FF) [PWRF]
Jun 19 14:52:52 rapter kernel: [ 25.775646] ACPI: Battery Slot [BAT0] (battery present)
Jun 19 14:52:52 rapter kernel: [ 25.775776] input: Power Button (CM) as /devices/virtual/input/input5
Jun 19 14:52:52 rapter kernel: [ 25.810749] intel_rng: FWH not detected
Jun 19 14:52:52 rapter kernel: [ 25.819118] ACPI: Power Button (CM) [PWRB]
Jun 19 14:52:52 rapter kernel: [ 25.819183] input: Sleep Button (CM) as /devices/virtual/input/input6
Jun 19 14:52:52 rapter kernel: [ 25.875140] ACPI: Sleep Button (CM) [SLPB]
Jun 19 14:52:52 rapter kernel: [ 25.875208] input: Lid Switch as /devices/virtual/input/input7
Jun 19 14:52:52 rapter kernel: [ 25.909369] ACPI: Lid Switch [LID]
Jun 19 14:52:52 rapter kernel: [ 25.909459] ACPI: WMI-Acer: Mapper loaded
Jun 19 14:52:52 rapter kernel: [ 25.909854] ACPI: AC Adapter [ACAD] (on-line)
Jun 19 14:52:52 rapter kernel: [ 26.031095] ricoh-mmc: Ricoh MMC Controller disabling driver
Jun 19 14:52:52 rapter kernel: [ 26.031100] ricoh-mmc: Copyright(c) Philip Langdale
Jun 19 14:52:52 rapter kernel: [ 26.031287] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
Jun 19 14:52:52 rapter kernel: [ 26.032178] ricoh-mmc: Controller is now disabled.
Jun 19 14:52:52 rapter kernel: [ 26.131287] sdhci: Secure Digital Host Controller Interface driver
Jun 19 14:52:52 rapter kernel: [ 26.131292] sdhci: Copyright(c) Pierre Ossman
Jun 19 14:52:52 rapter kernel: [ 26.131334] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
Jun 19 14:52:52 rapter kernel: [ 26.131353] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
Jun 19 14:52:52 rapter kernel: [ 26.131360] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 19 14:52:52 rapter kernel: [ 26.131380] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Jun 19 14:52:52 rapter kernel: [ 26.131388] PCI: Setting latency timer of device 0000:07:05.1 to 64
Jun 19 14:52:52 rapter kernel: [ 26.131434] mmc0: SDHCI at 0xde000800 irq 17 DMA
Jun 19 14:52:52 rapter kernel: [ 26.450546] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
Jun 19 14:52:52 rapter kernel: [ 26.502994] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jun 19 14:52:52 rapter kernel: [ 26.504621] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
Jun 19 14:52:52 rapter kernel: [ 26.558993] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jun 19 14:52:52 rapter kernel: [ 27.041556] Driver 'sr' needs updating - please use bus_type methods
Jun 19 14:52:52 rapter kernel: [ 27.071313] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jun 19 14:52:52 rapter kernel: [ 27.071318] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Jun 19 14:52:52 rapter kernel: [ 27.091480] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
Jun 19 14:52:52 rapter kernel: [ 27.143397] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 19 14:52:52 rapter kernel: [ 27.143403] Uniform CD-ROM driver Revision: 3.20
Jun 19 14:52:52 rapter kernel: [ 27.143495] sr 4:0:0:0: Attached scsi CD-ROM sr0
Jun 19 14:52:52 rapter kernel: [ 27.151031] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Jun 19 14:52:52 rapter kernel: [ 27.184409] Linux video capture interface: v2.00
Jun 19 14:52:52 rapter kernel: [ 27.307420] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
Jun 19 14:52:52 rapter kernel: [ 27.307451] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 19 14:52:52 rapter kernel: [ 27.330071] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
Jun 19 14:52:52 rapter kernel: [ 27.330564] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:52:52 rapter kernel: [ 27.330791] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 14:52:52 rapter kernel: [ 27.330794] uvcvideo: Failed to initialize the device (-5).
Jun 19 14:52:52 rapter kernel: [ 27.330816] usbcore: registered new interface driver uvcvideo
Jun 19 14:52:52 rapter kernel: [ 27.330819] USB Video Class driver (v0.1.0)
Jun 19 14:52:52 rapter kernel: [ 27.367166] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
Jun 19 14:52:52 rapter kernel: [ 27.367171] iwl3945: Copyright(c) 2003-2007 Intel Corporation
Jun 19 14:52:52 rapter kernel: [ 27.371072] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 14:52:52 rapter kernel: [ 27.371090] PCI: Setting latency timer of device 0000:02:00.0 to 64
Jun 19 14:52:52 rapter kernel: [ 27.371110] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jun 19 14:52:52 rapter kernel: [ 27.503808] NET: Registered protocol family 10
Jun 19 14:52:52 rapter kernel: [ 27.504086] lo: Disabled Privacy Extensions
Jun 19 14:52:52 rapter kernel: [ 28.157759] iwl3945: Radio Frequency Kill Switch is On:
Jun 19 14:52:52 rapter kernel: [ 28.157764] Kill switch must be turned off for wireless networking to work.
Jun 19 14:52:52 rapter kernel: [ 28.162899] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:52:52 rapter kernel: [ 28.172923] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:52:52 rapter kernel: [ 28.192880] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:52:52 rapter kernel: [ 28.220482] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:52:52 rapter kernel: [ 28.240914] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Jun 19 14:52:52 rapter kernel: [ 28.326565] lp: driver loaded but no devices found
Jun 19 14:52:52 rapter kernel: [ 28.439177] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
Jun 19 14:52:52 rapter kernel: [ 28.929345] EXT3 FS on sda1, internal journal
Jun 19 14:52:52 rapter kernel: [ 29.685990] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 14:52:52 rapter kernel: [ 30.092323] No dock devices found.
Jun 19 14:52:52 rapter kernel: [ 31.156564] apm: BIOS not found.
Jun 19 14:52:52 rapter kernel: [ 31.292062] ppdev: user-space parallel port driver
Jun 19 14:52:52 rapter kernel: [ 31.403757] audit(1213861972.736:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5219 profile="/usr/sbin/cupsd" namespace="default"
Jun 19 14:52:54 rapter kernel: [ 32.623181] Bluetooth: Core ver 2.11
Jun 19 14:52:54 rapter kernel: [ 32.623337] NET: Registered protocol family 31
Jun 19 14:52:54 rapter kernel: [ 32.623341] Bluetooth: HCI device and connection manager initialized
Jun 19 14:52:54 rapter kernel: [ 32.623351] Bluetooth: HCI socket layer initialized
Jun 19 14:52:54 rapter kernel: [ 32.674099] Bluetooth: L2CAP ver 2.9
Jun 19 14:52:54 rapter kernel: [ 32.674108] Bluetooth: L2CAP socket layer initialized
Jun 19 14:52:54 rapter kernel: [ 32.742415] Bluetooth: RFCOMM socket layer initialized
Jun 19 14:52:54 rapter kernel: [ 32.742430] Bluetooth: RFCOMM TTY layer initialized
Jun 19 14:52:54 rapter kernel: [ 32.742432] Bluetooth: RFCOMM ver 1.8
Jun 19 14:52:58 rapter kernel: [ 34.915513] eth0: no IPv6 routers present
Jun 19 14:53:23 rapter kernel: [ 51.275675] CPU0 attaching NULL sched-domain.
Jun 19 14:53:23 rapter kernel: [ 51.275685] CPU1 attaching NULL sched-domain.
Jun 19 14:53:23 rapter kernel: [ 51.288675] CPU0 attaching sched-domain:
Jun 19 14:53:23 rapter kernel: [ 51.288681] domain 0: span 03
Jun 19 14:53:23 rapter kernel: [ 51.288685] groups: 01 02
Jun 19 14:53:23 rapter kernel: [ 51.288690] CPU1 attaching sched-domain:
Jun 19 14:53:23 rapter kernel: [ 51.288693] domain 0: span 03
Jun 19 14:53:23 rapter kernel: [ 51.288696] groups: 02 01
Jun 19 14:59:18 rapter kernel: [ 189.326956] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Jun 19 14:59:20 rapter kernel: [ 189.717043] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 14:59:20 rapter kernel: [ 189.717127] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 14:59:20 rapter kernel: [ 189.717708] iwl3945: Error setting Tx power (-5).
Jun 19 14:59:20 rapter kernel: [ 190.711870] iwl3945: Can't stop Rx DMA.
Jun 19 14:59:20 rapter kernel: [ 190.938840] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 14:59:20 rapter kernel: [ 190.938923] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 14:59:20 rapter kernel: [ 190.939594] iwl3945: Error setting Tx power (-5).
Jun 19 14:59:21 rapter kernel: [ 191.933936] iwl3945: Can't stop Rx DMA.
Jun 19 14:59:21 rapter kernel: [ 192.154425] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 14:59:21 rapter kernel: [ 192.154509] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 14:59:21 rapter kernel: [ 192.155177] iwl3945: Error setting Tx power (-5).
Jun 19 14:59:22 rapter kernel: [ 193.149516] iwl3945: Can't stop Rx DMA.
Jun 19 14:59:23 rapter kernel: [ 193.376525] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 14:59:23 rapter kernel: [ 193.376603] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 14:59:23 rapter kernel: [ 193.377251] iwl3945: Error setting Tx power (-5).
Jun 19 14:59:24 rapter kernel: [ 194.371616] iwl3945: Can't stop Rx DMA.
Jun 19 14:59:24 rapter kernel: [ 194.593976] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 14:59:24 rapter kernel: [ 194.594057] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 14:59:24 rapter kernel: [ 194.594720] iwl3945: Error setting Tx power (-5).
Jun 19 14:59:25 rapter kernel: [ 195.589060] iwl3945: Can't stop Rx DMA.
Jun 19 14:59:25 rapter kernel: [ 195.756300] iwl3945: Radio Frequency Kill Switch is On:
Jun 19 14:59:25 rapter kernel: [ 195.756303] Kill switch must be turned off for wireless networking to work.
Jun 19 14:59:25 rapter kernel: [ 195.760922] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:59:25 rapter kernel: [ 195.770951] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:59:25 rapter kernel: [ 195.790906] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:59:25 rapter kernel: [ 195.818440] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
Jun 19 14:59:28 rapter kernel: [ 197.293739] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 15:00:29 rapter kernel: Inspecting /boot/System.map-2.6.24-19-generic
Jun 19 15:00:29 rapter kernel: Loaded 27883 symbols from /boot/System.map-2.6.24-19-generic.
Jun 19 15:00:29 rapter kernel: Symbols match kernel version 2.6.24.
Jun 19 15:00:30 rapter kernel: Loaded 37011 symbols from 98 modules.
Jun 19 15:00:30 rapter kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jun 19 15:00:30 rapter kernel: [ 0.000000] Initializing cgroup subsys cpu
Jun 19 15:00:30 rapter kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jun 19 15:00:30 rapter kernel: [ 0.000000] 126MB HIGHMEM available.
Jun 19 15:00:30 rapter kernel: [ 0.000000] 896MB LOWMEM available.
Jun 19 15:00:30 rapter kernel: [ 0.000000] found SMP MP-table at 000f7d10
Jun 19 15:00:30 rapter kernel: [ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
Jun 19 15:00:30 rapter kernel: [ 0.000000] Zone PFN ranges:
Jun 19 15:00:30 rapter kernel: [ 0.000000] DMA 0 -> 4096
Jun 19 15:00:30 rapter kernel: [ 0.000000] Normal 4096 -> 229376
Jun 19 15:00:30 rapter kernel: [ 0.000000] HighMem 229376 -> 261744
Jun 19 15:00:30 rapter kernel: [ 0.000000] Movable zone start PFN for each node
Jun 19 15:00:30 rapter kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jun 19 15:00:30 rapter kernel: [ 0.000000] 0: 0 -> 261744
Jun 19 15:00:30 rapter kernel: [ 0.000000] On node 0 totalpages: 261744
Jun 19 15:00:30 rapter kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 19 15:00:30 rapter kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 19 15:00:30 rapter kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jun 19 15:00:30 rapter kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jun 19 15:00:30 rapter kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jun 19 15:00:30 rapter kernel: [ 0.000000] HighMem zone: 252 pages used for memmap
Jun 19 15:00:30 rapter kernel: [ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
Jun 19 15:00:30 rapter kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 19 15:00:30 rapter kernel: [ 0.000000] DMI present.
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: XSDT 3FE7B3D3, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: FACP 3FE83BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: DSDT 3FE7C693, 74F1 (r1 HP 30BC 6040000 MSFT 100000E)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: FACS 3FE84FC0, 0040
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: APIC 3FE83CEC, 0068 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: HPET 3FE83D54, 0038 (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: MCFG 3FE83D8C, 003C (r1 HP 30BC 6040000 LOHR 5A)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: TCPA 3FE83DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: APIC 3FE83DFA, 0068 (r1 HP 30BC 6040000 LTP 0)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: BOOT 3FE83E62, 0028 (r1 HP 30BC 6040000 LTP 1)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: SLIC 3FE83E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7C489, 020A (r1 HP 30BC 1000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B9E3, 025F (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B93D, 00A6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: SSDT 3FE7B457, 04E6 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify <email address hidden>
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: DMI detected: Hewlett-Packard
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 19 15:00:30 rapter kernel: [ 0.000000] Processor #0 6:14 APIC version 20
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jun 19 15:00:30 rapter kernel: [ 0.000000] Processor #1 6:14 APIC version 20
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 19 15:00:30 rapter kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 19 15:00:30 rapter kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 19 15:00:30 rapter kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jun 19 15:00:30 rapter kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jun 19 15:00:30 rapter kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Jun 19 15:00:30 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Jun 19 15:00:30 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
Jun 19 15:00:30 rapter kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Jun 19 15:00:30 rapter kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259700
Jun 19 15:00:30 rapter kernel: [ 0.000000] Kernel command line: root=UUID=30f5286a-0833-4627-8a90-220d7a5d6093 ro quiet splash
Jun 19 15:00:30 rapter kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jun 19 15:00:30 rapter kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jun 19 15:00:30 rapter kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jun 19 15:00:30 rapter kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jun 19 15:00:30 rapter kernel: [ 0.000000] Initializing CPU#0
Jun 19 15:00:30 rapter kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 19 15:00:30 rapter kernel: [ 0.000000] Detected 1729.677 MHz processor.
Jun 19 15:00:30 rapter kernel: [ 10.169053] Console: colour VGA+ 80x25
Jun 19 15:00:30 rapter kernel: [ 10.169057] console [tty0] enabled
Jun 19 15:00:30 rapter kernel: [ 10.169352] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 19 15:00:30 rapter kernel: [ 10.169726] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 19 15:00:30 rapter kernel: [ 10.197295] Memory: 1025848k/1046976k available (2177k kernel code, 20464k reserved, 1006k data, 368k init, 129472k highmem)
Jun 19 15:00:30 rapter kernel: [ 10.197303] virtual kernel memory layout:
Jun 19 15:00:30 rapter kernel: [ 10.197305] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Jun 19 15:00:30 rapter kernel: [ 10.197306] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 19 15:00:30 rapter kernel: [ 10.197307] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 19 15:00:30 rapter kernel: [ 10.197308] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 19 15:00:30 rapter kernel: [ 10.197310] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Jun 19 15:00:30 rapter kernel: [ 10.197311] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
Jun 19 15:00:30 rapter kernel: [ 10.197312] .text : 0xc0100000 - 0xc0320434 (2177 kB)
Jun 19 15:00:30 rapter kernel: [ 10.197316] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 19 15:00:30 rapter kernel: [ 10.197349] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jun 19 15:00:30 rapter kernel: [ 10.197492] hpet clockevent registered
Jun 19 15:00:30 rapter kernel: [ 10.277489] Calibrating delay using timer specific routine.. 3463.13 BogoMIPS (lpj=6926267)
Jun 19 15:00:30 rapter kernel: [ 10.277511] Security Framework initialized
Jun 19 15:00:30 rapter kernel: [ 10.277517] SELinux: Disabled at boot.
Jun 19 15:00:30 rapter kernel: [ 10.277531] AppArmor: AppArmor initialized
Jun 19 15:00:30 rapter kernel: [ 10.277535] Failure registering capabilities with primary security module.
Jun 19 15:00:30 rapter kernel: [ 10.277543] Mount-cache hash table entries: 512
Jun 19 15:00:30 rapter kernel: [ 10.277654] Initializing cgroup subsys ns
Jun 19 15:00:30 rapter kernel: [ 10.277658] Initializing cgroup subsys cpuacct
Jun 19 15:00:30 rapter kernel: [ 10.277668] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 15:00:30 rapter kernel: [ 10.277676] monitor/mwait feature present.
Jun 19 15:00:30 rapter kernel: [ 10.277678] using mwait in idle threads.
Jun 19 15:00:30 rapter kernel: [ 10.277682] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 15:00:30 rapter kernel: [ 10.277685] CPU: L2 cache: 2048K
Jun 19 15:00:30 rapter kernel: [ 10.277687] CPU: Physical Processor ID: 0
Jun 19 15:00:30 rapter kernel: [ 10.277689] CPU: Processor Core ID: 0
Jun 19 15:00:30 rapter kernel: [ 10.277691] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 15:00:30 rapter kernel: [ 10.277700] Compat vDSO mapped to ffffe000.
Jun 19 15:00:30 rapter kernel: [ 10.277712] Checking 'hlt' instruction... OK.
Jun 19 15:00:30 rapter kernel: [ 10.293879] SMP alternatives: switching to UP code
Jun 19 15:00:30 rapter kernel: [ 10.295668] Early unpacking initramfs... done
Jun 19 15:00:30 rapter kernel: [ 10.646107] ACPI: Core revision 20070126
Jun 19 15:00:30 rapter kernel: [ 10.646176] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jun 19 15:00:30 rapter kernel: [ 10.652764] CPU0: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 15:00:30 rapter kernel: [ 10.652781] SMP alternatives: switching to SMP code
Jun 19 15:00:30 rapter kernel: [ 10.653487] Booting processor 1/1 eip 3000
Jun 19 15:00:30 rapter kernel: [ 10.663722] Initializing CPU#1
Jun 19 15:00:30 rapter kernel: [ 10.741423] Calibrating delay using timer specific routine.. 3459.06 BogoMIPS (lpj=6918126)
Jun 19 15:00:30 rapter kernel: [ 10.741430] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
Jun 19 15:00:30 rapter kernel: [ 10.741436] monitor/mwait feature present.
Jun 19 15:00:30 rapter kernel: [ 10.741439] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 19 15:00:30 rapter kernel: [ 10.741441] CPU: L2 cache: 2048K
Jun 19 15:00:30 rapter kernel: [ 10.741444] CPU: Physical Processor ID: 0
Jun 19 15:00:30 rapter kernel: [ 10.741445] CPU: Processor Core ID: 1
Jun 19 15:00:30 rapter kernel: [ 10.741447] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
Jun 19 15:00:30 rapter kernel: [ 10.742031] CPU1: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz stepping 0c
Jun 19 15:00:30 rapter kernel: [ 10.742055] Total of 2 processors activated (6922.19 BogoMIPS).
Jun 19 15:00:30 rapter kernel: [ 10.742253] ENABLING IO-APIC IRQs
Jun 19 15:00:30 rapter kernel: [ 10.742448] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 19 15:00:30 rapter kernel: [ 10.889525] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 19 15:00:30 rapter kernel: [ 10.909545] Brought up 2 CPUs
Jun 19 15:00:30 rapter kernel: [ 10.909572] CPU0 attaching sched-domain:
Jun 19 15:00:30 rapter kernel: [ 10.909574] domain 0: span 03
Jun 19 15:00:30 rapter kernel: [ 10.909576] groups: 01 02
Jun 19 15:00:30 rapter kernel: [ 10.909580] CPU1 attaching sched-domain:
Jun 19 15:00:30 rapter kernel: [ 10.909581] domain 0: span 03
Jun 19 15:00:30 rapter kernel: [ 10.909583] groups: 02 01
Jun 19 15:00:30 rapter kernel: [ 10.909838] net_namespace: 64 bytes
Jun 19 15:00:30 rapter kernel: [ 10.909849] Booting paravirtualized kernel on bare hardware
Jun 19 15:00:30 rapter kernel: [ 10.910317] Time: 7:59:54 Date: 06/19/08
Jun 19 15:00:30 rapter kernel: [ 10.910346] NET: Registered protocol family 16
Jun 19 15:00:30 rapter kernel: [ 10.910565] EISA bus registered
Jun 19 15:00:30 rapter kernel: [ 10.910570] ACPI: bus type pci registered
Jun 19 15:00:30 rapter kernel: [ 10.910792] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
Jun 19 15:00:30 rapter kernel: [ 10.910794] PCI: Using configuration type 1
Jun 19 15:00:30 rapter kernel: [ 10.910808] Setting up standard PCI resources
Jun 19 15:00:30 rapter kernel: [ 10.913381] ACPI: EC: Look up EC in DSDT
Jun 19 15:00:30 rapter kernel: [ 10.915770] ACPI: BIOS _OSI(Linux) query ignored via DMI
Jun 19 15:00:30 rapter kernel: [ 10.916215] ACPI: Interpreter enabled
Jun 19 15:00:30 rapter kernel: [ 10.916218] ACPI: (supports S0 S3 S4 S5)
Jun 19 15:00:30 rapter kernel: [ 10.916233] ACPI: Using IOAPIC for interrupt routing
Jun 19 15:00:30 rapter kernel: [ 10.917709] ACPI: EC: non-query interrupt received, switching to interrupt mode
Jun 19 15:00:30 rapter kernel: [ 10.922287] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jun 19 15:00:30 rapter kernel: [ 10.922290] ACPI: EC: driver started in interrupt mode
Jun 19 15:00:30 rapter kernel: [ 10.922339] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 19 15:00:30 rapter kernel: [ 10.923123] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jun 19 15:00:30 rapter kernel: [ 10.923127] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Jun 19 15:00:30 rapter kernel: [ 10.924640] PCI: Transparent bridge - 0000:00:1e.0
Jun 19 15:00:30 rapter kernel: [ 10.924688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.924994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.925129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.925255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.925378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.925519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jun 19 15:00:30 rapter kernel: [ 10.931999] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 19 15:00:30 rapter kernel: [ 10.932121] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
Jun 19 15:00:30 rapter kernel: [ 10.932242] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jun 19 15:00:30 rapter kernel: [ 10.932362] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jun 19 15:00:30 rapter kernel: [ 10.932482] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
Jun 19 15:00:30 rapter kernel: [ 10.932602] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
Jun 19 15:00:30 rapter kernel: [ 10.932723] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
Jun 19 15:00:30 rapter kernel: [ 10.932842] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
Jun 19 15:00:30 rapter kernel: [ 10.932988] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 19 15:00:30 rapter kernel: [ 10.933022] pnp: PnP ACPI init
Jun 19 15:00:30 rapter kernel: [ 10.933029] ACPI: bus type pnp registered
Jun 19 15:00:30 rapter kernel: [ 10.935378] pnp: PnP ACPI: found 11 devices
Jun 19 15:00:30 rapter kernel: [ 10.935380] ACPI: ACPI bus type pnp unregistered
Jun 19 15:00:30 rapter kernel: [ 10.935384] PnPBIOS: Disabled by ACPI PNP
Jun 19 15:00:30 rapter kernel: [ 10.935643] PCI: Using ACPI for IRQ routing
Jun 19 15:00:30 rapter kernel: [ 10.935645] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 19 15:00:30 rapter kernel: [ 10.985531] NET: Registered protocol family 8
Jun 19 15:00:30 rapter kernel: [ 10.985534] NET: Registered protocol family 20
Jun 19 15:00:30 rapter kernel: [ 10.985571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 19 15:00:30 rapter kernel: [ 10.985576] hpet0: 3 64-bit timers, 14318180 Hz
Jun 19 15:00:30 rapter kernel: [ 10.986611] AppArmor: AppArmor Filesystem Enabled
Jun 19 15:00:30 rapter kernel: [ 10.989398] Time: tsc clocksource has been installed.
Jun 19 15:00:30 rapter kernel: [ 10.989413] Switched to high resolution mode on CPU 0
Jun 19 15:00:30 rapter kernel: [ 10.989527] Switched to high resolution mode on CPU 1
Jun 19 15:00:30 rapter kernel: [ 11.002396] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002403] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002406] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002409] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002413] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002416] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002419] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002422] system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002425] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002432] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jun 19 15:00:30 rapter kernel: [ 11.002439] system 00:06: ioport range 0x380-0x383 has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002442] system 00:06: ioport range 0x680-0x69f has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002445] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002448] system 00:06: ioport range 0x1000-0x107f has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002451] system 00:06: ioport range 0x1180-0x11bf has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002453] system 00:06: ioport range 0x1640-0x164f has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002459] system 00:07: ioport range 0x6a0-0x6af has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.002462] system 00:07: ioport range 0x6b0-0x6ff has been reserved
Jun 19 15:00:30 rapter kernel: [ 11.032923] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
Jun 19 15:00:30 rapter kernel: [ 11.032926] PCI: Bridge: 0000:00:01.0
Jun 19 15:00:30 rapter kernel: [ 11.032927] IO window: disabled.
Jun 19 15:00:30 rapter kernel: [ 11.032931] MEM window: dc000000-ddffffff
Jun 19 15:00:30 rapter kernel: [ 11.032934] PREFETCH window: c0000000-cfffffff
Jun 19 15:00:30 rapter kernel: [ 11.032938] PCI: Bridge: 0000:00:1c.0
Jun 19 15:00:30 rapter kernel: [ 11.032942] IO window: 2000-2fff
Jun 19 15:00:30 rapter kernel: [ 11.032948] MEM window: d8000000-d9ffffff
Jun 19 15:00:30 rapter kernel: [ 11.032952] PREFETCH window: d2000000-d3ffffff
Jun 19 15:00:30 rapter kernel: [ 11.032958] PCI: Bridge: 0000:00:1c.1
Jun 19 15:00:30 rapter kernel: [ 11.032961] IO window: 3000-3fff
Jun 19 15:00:30 rapter kernel: [ 11.032967] MEM window: d6000000-d7ffffff
Jun 19 15:00:30 rapter kernel: [ 11.032972] PREFETCH window: d0000000-d1ffffff
Jun 19 15:00:30 rapter kernel: [ 11.032978] PCI: Bridge: 0000:00:1c.2
Jun 19 15:00:30 rapter kernel: [ 11.032981] IO window: 4000-4fff
Jun 19 15:00:30 rapter kernel: [ 11.032987] MEM window: da000000-dbffffff
Jun 19 15:00:30 rapter kernel: [ 11.032992] PREFETCH window: d4000000-d5ffffff
Jun 19 15:00:30 rapter kernel: [ 11.032998] PCI: Bridge: 0000:00:1e.0
Jun 19 15:00:30 rapter kernel: [ 11.033000] IO window: disabled.
Jun 19 15:00:30 rapter kernel: [ 11.033005] MEM window: de000000-de0fffff
Jun 19 15:00:30 rapter kernel: [ 11.033010] PREFETCH window: disabled.
Jun 19 15:00:30 rapter kernel: [ 11.033029] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 11.033034] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 15:00:30 rapter kernel: [ 11.033058] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 19 15:00:30 rapter kernel: [ 11.033065] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 15:00:30 rapter kernel: [ 11.033088] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 11.033094] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 15:00:30 rapter kernel: [ 11.033119] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 15:00:30 rapter kernel: [ 11.033125] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 15:00:30 rapter kernel: [ 11.033136] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
Jun 19 15:00:30 rapter kernel: [ 11.033143] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 19 15:00:30 rapter kernel: [ 11.033154] NET: Registered protocol family 2
Jun 19 15:00:30 rapter kernel: [ 11.070414] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 19 15:00:30 rapter kernel: [ 11.070638] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 19 15:00:30 rapter kernel: [ 11.071349] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 19 15:00:30 rapter kernel: [ 11.071701] TCP: Hash tables configured (established 131072 bind 65536)
Jun 19 15:00:30 rapter kernel: [ 11.071704] TCP reno registered
Jun 19 15:00:30 rapter kernel: [ 11.082509] checking if image is initramfs... it is
Jun 19 15:00:30 rapter kernel: [ 11.776758] Freeing initrd memory: 7293k freed
Jun 19 15:00:30 rapter kernel: [ 11.776932] Simple Boot Flag at 0x35 set to 0x1
Jun 19 15:00:30 rapter kernel: [ 11.777661] audit: initializing netlink socket (disabled)
Jun 19 15:00:30 rapter kernel: [ 11.777674] audit(1213862394.456:1): initialized
Jun 19 15:00:30 rapter kernel: [ 11.777874] highmem bounce pool size: 64 pages
Jun 19 15:00:30 rapter kernel: [ 11.779974] VFS: Disk quotas dquot_6.5.1
Jun 19 15:00:30 rapter kernel: [ 11.780051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 19 15:00:30 rapter kernel: [ 11.780188] io scheduler noop registered
Jun 19 15:00:30 rapter kernel: [ 11.780190] io scheduler anticipatory registered
Jun 19 15:00:30 rapter kernel: [ 11.780192] io scheduler deadline registered
Jun 19 15:00:30 rapter kernel: [ 11.780204] io scheduler cfq registered (default)
Jun 19 15:00:30 rapter kernel: [ 11.780319] Boot video device is 0000:01:00.0
Jun 19 15:00:30 rapter kernel: [ 11.780438] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 19 15:00:30 rapter kernel: [ 11.780476] assign_interrupt_mode Found MSI capability
Jun 19 15:00:30 rapter kernel: [ 11.780508] Allocate Port Service[0000:00:01.0:pcie00]
Jun 19 15:00:30 rapter kernel: [ 11.780592] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 19 15:00:30 rapter kernel: [ 11.780650] assign_interrupt_mode Found MSI capability
Jun 19 15:00:30 rapter kernel: [ 11.780697] Allocate Port Service[0000:00:1c.0:pcie00]
Jun 19 15:00:30 rapter kernel: [ 11.780734] Allocate Port Service[0000:00:1c.0:pcie02]
Jun 19 15:00:30 rapter kernel: [ 11.780843] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 19 15:00:30 rapter kernel: [ 11.780901] assign_interrupt_mode Found MSI capability
Jun 19 15:00:30 rapter kernel: [ 11.780947] Allocate Port Service[0000:00:1c.1:pcie00]
Jun 19 15:00:30 rapter kernel: [ 11.780984] Allocate Port Service[0000:00:1c.1:pcie02]
Jun 19 15:00:30 rapter kernel: [ 11.781088] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 19 15:00:30 rapter kernel: [ 11.781147] assign_interrupt_mode Found MSI capability
Jun 19 15:00:30 rapter kernel: [ 11.781193] Allocate Port Service[0000:00:1c.2:pcie00]
Jun 19 15:00:30 rapter kernel: [ 11.781232] Allocate Port Service[0000:00:1c.2:pcie02]
Jun 19 15:00:30 rapter kernel: [ 11.781517] isapnp: Scanning for PnP cards...
Jun 19 15:00:30 rapter kernel: [ 12.136024] isapnp: No Plug & Play device found
Jun 19 15:00:30 rapter kernel: [ 12.164266] Real Time Clock Driver v1.12ac
Jun 19 15:00:30 rapter kernel: [ 12.164503] hpet_resources: 0xfed00000 is busy
Jun 19 15:00:30 rapter kernel: [ 12.164533] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 19 15:00:30 rapter kernel: [ 12.165806] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 19 15:00:30 rapter kernel: [ 12.165879] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 19 15:00:30 rapter kernel: [ 12.165982] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 19 15:00:30 rapter kernel: [ 12.181990] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 19 15:00:30 rapter kernel: [ 12.181995] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 19 15:00:30 rapter kernel: [ 12.197356] mice: PS/2 mouse device common for all mice
Jun 19 15:00:30 rapter kernel: [ 12.197475] EISA: Probing bus 0 at eisa.0
Jun 19 15:00:30 rapter kernel: [ 12.197483] Cannot allocate resource for EISA slot 1
Jun 19 15:00:30 rapter kernel: [ 12.197486] Cannot allocate resource for EISA slot 2
Jun 19 15:00:30 rapter kernel: [ 12.197488] Cannot allocate resource for EISA slot 3
Jun 19 15:00:30 rapter kernel: [ 12.197490] Cannot allocate resource for EISA slot 4
Jun 19 15:00:30 rapter kernel: [ 12.197509] EISA: Detected 0 cards.
Jun 19 15:00:30 rapter kernel: [ 12.197512] cpuidle: using governor ladder
Jun 19 15:00:30 rapter kernel: [ 12.197514] cpuidle: using governor menu
Jun 19 15:00:30 rapter kernel: [ 12.197603] NET: Registered protocol family 1
Jun 19 15:00:30 rapter kernel: [ 12.197630] Using IPI No-Shortcut mode
Jun 19 15:00:30 rapter kernel: [ 12.197661] registered taskstats version 1
Jun 19 15:00:30 rapter kernel: [ 12.197780] Magic number: 12:609:976
Jun 19 15:00:30 rapter kernel: [ 12.197786] hash matches device ttyc3
Jun 19 15:00:30 rapter kernel: [ 12.197870] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jun 19 15:00:30 rapter kernel: [ 12.197872] EDD information not available.
Jun 19 15:00:30 rapter kernel: [ 12.198075] Freeing unused kernel memory: 368k freed
Jun 19 15:00:30 rapter kernel: [ 12.211252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 19 15:00:30 rapter kernel: [ 13.421534] fuse init (API version 7.9)
Jun 19 15:00:30 rapter kernel: [ 13.442416] ACPI: SSDT 3FE7C189, 0238 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 13.442641] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP 30BC 3001 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 13.445054] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 15:00:30 rapter kernel: [ 13.445059] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 19 15:00:30 rapter kernel: [ 13.445317] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 13.445523] ACPI: SSDT 3FE7C104, 0085 (r1 HP 30BC 3000 INTL 20050624)
Jun 19 15:00:30 rapter kernel: [ 13.446468] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jun 19 15:00:30 rapter kernel: [ 13.446473] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 19 15:00:30 rapter kernel: [ 13.451177] ACPI: Thermal Zone [THR1] (44 C)
Jun 19 15:00:30 rapter kernel: [ 13.860545] usbcore: registered new interface driver usbfs
Jun 19 15:00:30 rapter kernel: [ 13.860572] usbcore: registered new interface driver hub
Jun 19 15:00:30 rapter kernel: [ 13.860599] usbcore: registered new device driver usb
Jun 19 15:00:30 rapter kernel: [ 13.873659] USB Universal Host Controller Interface driver v3.0
Jun 19 15:00:30 rapter kernel: [ 13.873719] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 15:00:30 rapter kernel: [ 13.873730] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 19 15:00:30 rapter kernel: [ 13.873734] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 19 15:00:30 rapter kernel: [ 13.873983] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 19 15:00:30 rapter kernel: [ 13.874017] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
Jun 19 15:00:30 rapter kernel: [ 13.874223] usb usb1: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 13.874249] hub 1-0:1.0: USB hub found
Jun 19 15:00:30 rapter kernel: [ 13.874256] hub 1-0:1.0: 2 ports detected
Jun 19 15:00:30 rapter kernel: [ 13.875899] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Jun 19 15:00:30 rapter kernel: [ 13.875902] Copyright (c) 1999-2006 Intel Corporation.
Jun 19 15:00:30 rapter kernel: [ 13.909835] SCSI subsystem initialized
Jun 19 15:00:30 rapter kernel: [ 13.937164] libata version 3.00 loaded.
Jun 19 15:00:30 rapter kernel: [ 13.978240] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 15:00:30 rapter kernel: [ 13.978253] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 19 15:00:30 rapter kernel: [ 13.978257] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 19 15:00:30 rapter kernel: [ 13.978281] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 19 15:00:30 rapter kernel: [ 13.978315] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
Jun 19 15:00:30 rapter kernel: [ 13.978433] usb usb2: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 13.978461] hub 2-0:1.0: USB hub found
Jun 19 15:00:30 rapter kernel: [ 13.978467] hub 2-0:1.0: 2 ports detected
Jun 19 15:00:30 rapter kernel: [ 14.082274] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 19 15:00:30 rapter kernel: [ 14.082287] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 19 15:00:30 rapter kernel: [ 14.082292] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 19 15:00:30 rapter kernel: [ 14.082317] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 19 15:00:30 rapter kernel: [ 14.082352] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Jun 19 15:00:30 rapter kernel: [ 14.082474] usb usb3: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 14.082498] hub 3-0:1.0: USB hub found
Jun 19 15:00:30 rapter kernel: [ 14.082504] hub 3-0:1.0: 2 ports detected
Jun 19 15:00:30 rapter kernel: [ 14.186228] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 14.186241] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 19 15:00:30 rapter kernel: [ 14.186246] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 19 15:00:30 rapter kernel: [ 14.186269] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 19 15:00:30 rapter kernel: [ 14.186303] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Jun 19 15:00:30 rapter kernel: [ 14.186425] usb usb4: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 14.186448] hub 4-0:1.0: USB hub found
Jun 19 15:00:30 rapter kernel: [ 14.186454] hub 4-0:1.0: 2 ports detected
Jun 19 15:00:30 rapter kernel: [ 14.290233] ahci 0000:00:1f.2: version 3.0
Jun 19 15:00:30 rapter kernel: [ 14.290267] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
Jun 19 15:00:30 rapter kernel: [ 14.290323] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
Jun 19 15:00:30 rapter kernel: [ 14.290326] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
Jun 19 15:00:30 rapter kernel: [ 14.322125] usb 2-1: new low speed USB device using uhci_hcd and address 2
Jun 19 15:00:30 rapter kernel: [ 14.470519] usb 2-1: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 14.489719] usbcore: registered new interface driver hiddev
Jun 19 15:00:30 rapter kernel: [ 14.496884] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
Jun 19 15:00:30 rapter kernel: [ 14.513187] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
Jun 19 15:00:30 rapter kernel: [ 14.513215] usbcore: registered new interface driver usbhid
Jun 19 15:00:30 rapter kernel: [ 14.513222] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jun 19 15:00:30 rapter kernel: [ 14.821095] Clocksource tsc unstable (delta = -790283251 ns)
Jun 19 15:00:30 rapter kernel: [ 14.825295] Time: hpet clocksource has been installed.
Jun 19 15:00:30 rapter kernel: [ 14.940176] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
Jun 19 15:00:30 rapter kernel: [ 14.940185] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Jun 19 15:00:30 rapter kernel: [ 14.940196] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 19 15:00:30 rapter kernel: [ 14.940583] scsi0 : ahci
Jun 19 15:00:30 rapter kernel: [ 14.940804] scsi1 : ahci
Jun 19 15:00:30 rapter kernel: [ 14.940952] scsi2 : ahci
Jun 19 15:00:30 rapter kernel: [ 14.941113] scsi3 : ahci
Jun 19 15:00:30 rapter kernel: [ 14.941198] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
Jun 19 15:00:30 rapter kernel: [ 14.941202] ata2: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
Jun 19 15:00:30 rapter kernel: [ 14.941206] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
Jun 19 15:00:30 rapter kernel: [ 14.941209] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
Jun 19 15:00:30 rapter kernel: [ 15.036062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 19 15:00:30 rapter kernel: [ 15.036918] ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
Jun 19 15:00:30 rapter kernel: [ 15.036925] ata1.00: 312581808 sectors, multi 16: LBA48
Jun 19 15:00:30 rapter kernel: [ 15.037999] ata1.00: configured for UDMA/100
Jun 19 15:00:30 rapter kernel: [ 15.089925] ata2: SATA link down (SStatus 0 SControl 0)
Jun 19 15:00:30 rapter kernel: [ 15.136746] ata3: SATA link down (SStatus 0 SControl 300)
Jun 19 15:00:30 rapter kernel: [ 15.172114] ata4: SATA link down (SStatus 0 SControl 0)
Jun 19 15:00:30 rapter kernel: [ 15.172400] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
Jun 19 15:00:30 rapter kernel: [ 15.174220] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 15:00:30 rapter kernel: [ 15.174237] PCI: Setting latency timer of device 0000:05:00.0 to 64
Jun 19 15:00:30 rapter kernel: [ 15.182994] Driver 'sd' needs updating - please use bus_type methods
Jun 19 15:00:30 rapter kernel: [ 15.184914] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 15:00:30 rapter kernel: [ 15.184941] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 15:00:30 rapter kernel: [ 15.184947] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 15:00:30 rapter kernel: [ 15.184984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 15:00:30 rapter kernel: [ 15.185080] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jun 19 15:00:30 rapter kernel: [ 15.185108] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 15:00:30 rapter kernel: [ 15.185110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 15:00:30 rapter kernel: [ 15.185127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 15:00:30 rapter kernel: [ 15.185131] sda: sda1 sda2 <<6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:e8:fa:65
Jun 19 15:00:30 rapter kernel: [ 15.233818] sda5 >
Jun 19 15:00:30 rapter kernel: [ 15.234011] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 15:00:30 rapter kernel: [ 15.238168] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 15:00:30 rapter kernel: [ 15.286481] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jun 19 15:00:30 rapter kernel: [ 15.286556] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Jun 19 15:00:30 rapter kernel: [ 15.286573] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 19 15:00:30 rapter kernel: [ 15.286578] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 19 15:00:30 rapter kernel: [ 15.286609] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 19 15:00:30 rapter kernel: [ 15.290528] ehci_hcd 0000:00:1d.7: debug port 1
Jun 19 15:00:30 rapter kernel: [ 15.290535] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jun 19 15:00:30 rapter kernel: [ 15.290542] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
Jun 19 15:00:30 rapter kernel: [ 15.304740] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 19 15:00:30 rapter kernel: [ 15.304971] usb usb5: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 15.305023] hub 5-0:1.0: USB hub found
Jun 19 15:00:30 rapter kernel: [ 15.305034] hub 5-0:1.0: 8 ports detected
Jun 19 15:00:30 rapter kernel: [ 15.381760] usb 2-1: USB disconnect, address 2
Jun 19 15:00:30 rapter kernel: [ 15.408960] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 15.408975] PCI: Setting latency timer of device 0000:07:05.0 to 64
Jun 19 15:00:30 rapter kernel: [ 15.461755] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Jun 19 15:00:30 rapter kernel: [ 15.465986] ata_piix 0000:00:1f.1: version 2.12
Jun 19 15:00:30 rapter kernel: [ 15.466006] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 19 15:00:30 rapter kernel: [ 15.466045] PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 19 15:00:30 rapter kernel: [ 15.466329] scsi4 : ata_piix
Jun 19 15:00:30 rapter kernel: [ 15.467447] scsi5 : ata_piix
Jun 19 15:00:30 rapter kernel: [ 15.467926] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
Jun 19 15:00:30 rapter kernel: [ 15.467929] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
Jun 19 15:00:30 rapter kernel: [ 15.481905] Attempting manual resume
Jun 19 15:00:30 rapter kernel: [ 15.481908] swsusp: Resume From Partition 8:5
Jun 19 15:00:30 rapter kernel: [ 15.481910] PM: Checking swsusp image.
Jun 19 15:00:30 rapter kernel: [ 15.482052] PM: Resume from disk failed.
Jun 19 15:00:30 rapter kernel: [ 15.536967] kjournald starting. Commit interval 5 seconds
Jun 19 15:00:30 rapter kernel: [ 15.537009] EXT3-fs: mounted filesystem with ordered data mode.
Jun 19 15:00:30 rapter kernel: [ 15.801184] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
Jun 19 15:00:30 rapter kernel: [ 15.989093] ata5.00: configured for MWDMA2
Jun 19 15:00:30 rapter kernel: [ 15.989179] ata6: port disabled. ignoring.
Jun 19 15:00:30 rapter kernel: [ 16.005060] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
Jun 19 15:00:30 rapter kernel: [ 16.005210] scsi 4:0:0:0: Attached scsi generic sg1 type 5
Jun 19 15:00:30 rapter kernel: [ 16.088604] usb 5-4: new high speed USB device using ehci_hcd and address 3
Jun 19 15:00:30 rapter kernel: [ 16.224634] usb 5-4: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 16.465911] usb 2-1: new low speed USB device using uhci_hcd and address 3
Jun 19 15:00:30 rapter kernel: [ 16.643958] usb 2-1: configuration #1 chosen from 1 choice
Jun 19 15:00:30 rapter kernel: [ 16.661218] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input3
Jun 19 15:00:30 rapter kernel: [ 16.671769] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
Jun 19 15:00:30 rapter kernel: [ 16.737105] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000e1ede700]
Jun 19 15:00:30 rapter kernel: [ 25.019222] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 19 15:00:30 rapter kernel: [ 25.088604] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 19 15:00:30 rapter kernel: [ 25.156378] iTCO_vendor_support: vendor-support=0
Jun 19 15:00:30 rapter kernel: [ 25.183173] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jun 19 15:00:30 rapter kernel: [ 25.183544] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jun 19 15:00:30 rapter kernel: [ 25.183596] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 19 15:00:30 rapter kernel: [ 25.223243] Linux agpgart interface v0.102
Jun 19 15:00:30 rapter kernel: [ 25.271245] input: PC Speaker as /devices/platform/pcspkr/input/input4
Jun 19 15:00:30 rapter kernel: [ 25.551108] intel_rng: FWH not detected
Jun 19 15:00:30 rapter kernel: [ 25.643092] ricoh-mmc: Ricoh MMC Controller disabling driver
Jun 19 15:00:30 rapter kernel: [ 25.643098] ricoh-mmc: Copyright(c) Philip Langdale
Jun 19 15:00:30 rapter kernel: [ 25.643145] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
Jun 19 15:00:30 rapter kernel: [ 25.643158] ricoh-mmc: Controller is now disabled.
Jun 19 15:00:30 rapter kernel: [ 25.699507] ACPI: AC Adapter [ACAD] (on-line)
Jun 19 15:00:30 rapter kernel: [ 25.774604] sdhci: Secure Digital Host Controller Interface driver
Jun 19 15:00:30 rapter kernel: [ 25.774608] sdhci: Copyright(c) Pierre Ossman
Jun 19 15:00:30 rapter kernel: [ 25.774648] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
Jun 19 15:00:30 rapter kernel: [ 25.774667] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
Jun 19 15:00:30 rapter kernel: [ 25.774674] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 19 15:00:30 rapter kernel: [ 25.774691] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Jun 19 15:00:30 rapter kernel: [ 25.774699] PCI: Setting latency timer of device 0000:07:05.1 to 64
Jun 19 15:00:30 rapter kernel: [ 25.774749] mmc0: SDHCI at 0xde000800 irq 17 DMA
Jun 19 15:00:30 rapter kernel: [ 25.809546] ACPI: Battery Slot [BAT0] (battery present)
Jun 19 15:00:30 rapter kernel: [ 25.827145] input: Power Button (FF) as /devices/virtual/input/input5
Jun 19 15:00:30 rapter kernel: [ 25.882048] ACPI: Power Button (FF) [PWRF]
Jun 19 15:00:30 rapter kernel: [ 25.882122] input: Power Button (CM) as /devices/virtual/input/input6
Jun 19 15:00:30 rapter kernel: [ 25.942039] ACPI: Power Button (CM) [PWRB]
Jun 19 15:00:30 rapter kernel: [ 25.942112] input: Sleep Button (CM) as /devices/virtual/input/input7
Jun 19 15:00:30 rapter kernel: [ 26.006029] ACPI: Sleep Button (CM) [SLPB]
Jun 19 15:00:30 rapter kernel: [ 26.006096] input: Lid Switch as /devices/virtual/input/input8
Jun 19 15:00:30 rapter kernel: [ 26.038299] ACPI: Lid Switch [LID]
Jun 19 15:00:30 rapter kernel: [ 26.038386] ACPI: WMI-Acer: Mapper loaded
Jun 19 15:00:30 rapter kernel: [ 26.249659] nvidia: module license 'NVIDIA' taints kernel.
Jun 19 15:00:30 rapter kernel: [ 26.607250] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
Jun 19 15:00:30 rapter kernel: [ 26.649903] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jun 19 15:00:30 rapter kernel: [ 26.651517] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
Jun 19 15:00:30 rapter kernel: [ 26.713893] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jun 19 15:00:30 rapter kernel: [ 26.730099] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 26.730109] PCI: Setting latency timer of device 0000:01:00.0 to 64
Jun 19 15:00:30 rapter kernel: [ 26.730233] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
Jun 19 15:00:30 rapter kernel: [ 26.851023] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Jun 19 15:00:30 rapter kernel: [ 26.851028] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Jun 19 15:00:30 rapter kernel: [ 27.137561] Driver 'sr' needs updating - please use bus_type methods
Jun 19 15:00:30 rapter kernel: [ 27.195396] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
Jun 19 15:00:30 rapter kernel: [ 27.195423] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 19 15:00:30 rapter kernel: [ 27.237595] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 19 15:00:30 rapter kernel: [ 27.237601] Uniform CD-ROM driver Revision: 3.20
Jun 19 15:00:30 rapter kernel: [ 27.237659] sr 4:0:0:0: Attached scsi CD-ROM sr0
Jun 19 15:00:30 rapter kernel: [ 27.267317] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
Jun 19 15:00:30 rapter kernel: [ 27.267322] iwl3945: Copyright(c) 2003-2007 Intel Corporation
Jun 19 15:00:30 rapter kernel: [ 27.267426] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 19 15:00:30 rapter kernel: [ 27.267443] PCI: Setting latency timer of device 0000:02:00.0 to 64
Jun 19 15:00:30 rapter kernel: [ 27.267470] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jun 19 15:00:30 rapter kernel: [ 27.382425] Linux video capture interface: v2.00
Jun 19 15:00:30 rapter kernel: [ 27.424048] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
Jun 19 15:00:30 rapter kernel: [ 27.424335] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 15:00:30 rapter kernel: [ 27.425380] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
Jun 19 15:00:30 rapter kernel: [ 27.425383] uvcvideo: Failed to initialize the device (-5).
Jun 19 15:00:30 rapter kernel: [ 27.425407] usbcore: registered new interface driver uvcvideo
Jun 19 15:00:30 rapter kernel: [ 27.425410] USB Video Class driver (v0.1.0)
Jun 19 15:00:30 rapter kernel: [ 27.449795] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
Jun 19 15:00:30 rapter kernel: [ 27.510813] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
Jun 19 15:00:30 rapter kernel: [ 27.587683] NET: Registered protocol family 10
Jun 19 15:00:30 rapter kernel: [ 27.587900] lo: Disabled Privacy Extensions
Jun 19 15:00:30 rapter kernel: [ 28.287260] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Jun 19 15:00:30 rapter kernel: [ 28.288945] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Jun 19 15:00:30 rapter kernel: [ 28.529654] lp: driver loaded but no devices found
Jun 19 15:00:30 rapter kernel: [ 28.554920] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 28.554931] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 28.554940] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 29.548876] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 29.750013] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
Jun 19 15:00:30 rapter kernel: [ 29.941965] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 29.941981] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 29.942004] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 30.935954] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 31.260179] EXT3 FS on sda1, internal journal
Jun 19 15:00:30 rapter kernel: [ 31.319857] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 31.319867] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 31.319877] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 32.313814] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 32.509704] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 32.509718] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 32.509736] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 33.503857] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 33.897456] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 33.897466] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 33.897476] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 34.891413] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 35.289046] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 35.289063] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 35.289086] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 36.283227] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 36.476121] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 15:00:30 rapter kernel: [ 36.674345] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 36.674355] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 36.674366] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 37.668304] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 37.970664] No dock devices found.
Jun 19 15:00:30 rapter kernel: [ 38.032705] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 38.032714] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 38.032724] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 39.026661] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 39.126399] eth0: no IPv6 routers present
Jun 19 15:00:30 rapter kernel: [ 39.424504] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 39.424521] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 39.424538] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 40.418491] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 40.795389] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 40.795400] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 40.795410] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 41.789346] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:30 rapter kernel: [ 42.182927] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:30 rapter kernel: [ 42.182942] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:30 rapter kernel: [ 42.182961] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:30 rapter kernel: [ 43.176901] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:31 rapter kernel: [ 43.582885] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:31 rapter kernel: [ 43.582905] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:31 rapter kernel: [ 43.583308] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:31 rapter kernel: [ 44.577245] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:31 rapter kernel: [ 44.687344] apm: BIOS not found.
Jun 19 15:00:32 rapter kernel: [ 44.916743] ppdev: user-space parallel port driver
Jun 19 15:00:33 rapter kernel: [ 44.962262] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:33 rapter kernel: [ 44.962281] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:33 rapter kernel: [ 44.962300] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:33 rapter kernel: [ 45.956252] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:33 rapter kernel: [ 46.138834] audit(1213862433.344:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5255 profile="/usr/sbin/cupsd" namespace="default"
Jun 19 15:00:34 rapter kernel: [ 46.349993] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:34 rapter kernel: [ 46.350018] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:34 rapter kernel: [ 46.350570] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:34 rapter kernel: [ 47.344671] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:34 rapter kernel: [ 47.739274] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:34 rapter kernel: [ 47.739295] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:35 rapter kernel: [ 47.739804] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:35 rapter kernel: [ 48.733904] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:37 rapter kernel: [ 49.076869] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:37 rapter kernel: [ 49.076889] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:37 rapter kernel: [ 49.077400] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:37 rapter kernel: [ 50.071498] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:38 rapter kernel: [ 50.400977] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:38 rapter kernel: [ 50.401002] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:38 rapter kernel: [ 50.401530] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:38 rapter kernel: [ 51.395631] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:40 rapter kernel: [ 51.669322] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:40 rapter kernel: [ 51.669347] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:40 rapter kernel: [ 51.669870] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:40 rapter kernel: [ 52.663971] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:40 rapter kernel: [ 52.861130] Bluetooth: Core ver 2.11
Jun 19 15:00:40 rapter kernel: [ 52.861596] NET: Registered protocol family 31
Jun 19 15:00:40 rapter kernel: [ 52.861603] Bluetooth: HCI device and connection manager initialized
Jun 19 15:00:40 rapter kernel: [ 52.861611] Bluetooth: HCI socket layer initialized
Jun 19 15:00:40 rapter kernel: [ 52.887822] Bluetooth: L2CAP ver 2.9
Jun 19 15:00:40 rapter kernel: [ 52.887830] Bluetooth: L2CAP socket layer initialized
Jun 19 15:00:40 rapter kernel: [ 52.970294] Bluetooth: RFCOMM socket layer initialized
Jun 19 15:00:40 rapter kernel: [ 52.970309] Bluetooth: RFCOMM TTY layer initialized
Jun 19 15:00:40 rapter kernel: [ 52.970311] Bluetooth: RFCOMM ver 1.8
Jun 19 15:00:41 rapter kernel: [ 53.061560] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:41 rapter kernel: [ 53.061639] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:41 rapter kernel: [ 53.062257] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:41 rapter kernel: [ 54.056572] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:43 rapter kernel: [ 54.452702] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:43 rapter kernel: [ 54.452786] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:43 rapter kernel: [ 54.453406] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:43 rapter kernel: [ 55.447558] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:43 rapter kernel: [ 55.848328] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:43 rapter kernel: [ 55.848351] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:43 rapter kernel: [ 55.848371] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:44 rapter kernel: [ 56.842470] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:44 rapter kernel: [ 57.251929] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:44 rapter kernel: [ 57.251951] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:44 rapter kernel: [ 57.251971] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:45 rapter kernel: [ 58.246070] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:47 rapter kernel: [ 58.643876] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:47 rapter kernel: [ 58.643898] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:47 rapter kernel: [ 58.644415] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:47 rapter kernel: [ 59.638515] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:47 rapter kernel: [ 60.035638] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:47 rapter kernel: [ 60.035664] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:47 rapter kernel: [ 60.045416] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:48 rapter kernel: [ 61.039526] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:48 rapter kernel: [ 61.439434] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:48 rapter kernel: [ 61.439454] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:48 rapter kernel: [ 61.464365] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:50 rapter kernel: [ 62.458322] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:51 rapter kernel: [ 62.765848] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:51 rapter kernel: [ 62.765866] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:00:51 rapter kernel: [ 62.765891] iwl3945: Error setting Tx power (-5).
Jun 19 15:00:51 rapter kernel: [ 63.759989] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:53 rapter kernel: [ 65.492174] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:53 rapter kernel: [ 65.492186] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:00:54 rapter kernel: [ 66.486135] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:54 rapter kernel: [ 66.690495] iwl3945: Error bad temperature value 53
Jun 19 15:00:55 rapter kernel: [ 66.878535] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:55 rapter kernel: [ 66.878555] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:00:55 rapter kernel: [ 67.872849] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:55 rapter kernel: [ 68.051402] iwl3945: Error bad temperature value 53
Jun 19 15:00:55 rapter kernel: [ 68.100573] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:55 rapter kernel: [ 68.100597] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:00:56 rapter kernel: [ 69.095306] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:57 rapter kernel: [ 69.274883] iwl3945: Error bad temperature value 53
Jun 19 15:00:57 rapter kernel: [ 69.339268] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:57 rapter kernel: [ 69.339289] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:00:58 rapter kernel: [ 70.333967] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:58 rapter kernel: [ 70.513278] iwl3945: Error bad temperature value 53
Jun 19 15:00:58 rapter kernel: [ 70.534853] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:00:58 rapter kernel: [ 70.534877] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:00:59 rapter kernel: [ 71.529596] iwl3945: Can't stop Rx DMA.
Jun 19 15:00:59 rapter kernel: [ 71.704588] iwl3945: Error bad temperature value 53
Jun 19 15:01:00 rapter kernel: [ 71.726567] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:00 rapter kernel: [ 71.726580] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:01 rapter kernel: [ 72.720665] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:01 rapter kernel: [ 72.895569] iwl3945: Error bad temperature value 53
Jun 19 15:01:01 rapter kernel: [ 72.920356] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:01 rapter kernel: [ 72.920382] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:02 rapter kernel: [ 73.914496] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:02 rapter kernel: [ 74.090185] iwl3945: Error bad temperature value 53
Jun 19 15:01:02 rapter kernel: [ 74.123189] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:02 rapter kernel: [ 74.123212] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:03 rapter kernel: [ 75.117913] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:04 rapter kernel: [ 75.332649] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:04 rapter kernel: [ 75.332668] iwl3945: Error Reply type 0x00000005 cmd REPLY_RXON (0x10) seq 0x0402 ser 0x0000004B
Jun 19 15:01:04 rapter kernel: [ 75.333253] iwl3945: Error setting Tx power (-5).
Jun 19 15:01:04 rapter kernel: [ 75.333268] iwl3945: Error bad temperature value 53
Jun 19 15:01:05 rapter kernel: [ 76.327698] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:05 rapter kernel: [ 76.524690] iwl3945: Error bad temperature value 53
Jun 19 15:01:05 rapter kernel: [ 76.728403] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:05 rapter kernel: [ 76.728428] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:06 rapter kernel: [ 77.723150] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:06 rapter kernel: [ 77.921246] iwl3945: Error bad temperature value 53
Jun 19 15:01:08 rapter kernel: [ 78.123947] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:08 rapter kernel: [ 78.123972] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:08 rapter kernel: [ 79.118719] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:08 rapter kernel: [ 79.316943] iwl3945: Error bad temperature value 53
Jun 19 15:01:09 rapter kernel: [ 79.515895] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:09 rapter kernel: [ 79.515920] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:09 rapter kernel: [ 80.510528] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:09 rapter kernel: [ 80.709305] iwl3945: Error bad temperature value 53
Jun 19 15:01:09 rapter kernel: [ 80.910994] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:10 rapter kernel: [ 80.911019] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:10 rapter kernel: [ 81.905555] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:11 rapter kernel: [ 82.101231] iwl3945: Error bad temperature value 53
Jun 19 15:01:11 rapter kernel: [ 82.301525] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:11 rapter kernel: [ 82.301547] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:12 rapter kernel: [ 83.295656] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:12 rapter kernel: [ 83.491326] iwl3945: Error bad temperature value 53
Jun 19 15:01:13 rapter kernel: [ 83.693084] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:13 rapter kernel: [ 83.693108] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:13 rapter kernel: [ 84.687705] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:13 rapter kernel: [ 84.883360] iwl3945: Error bad temperature value 53
Jun 19 15:01:15 rapter kernel: [ 85.085405] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:15 rapter kernel: [ 85.085430] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:15 rapter kernel: [ 86.079550] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:15 rapter kernel: [ 86.278817] iwl3945: Error bad temperature value 53
Jun 19 15:01:15 rapter kernel: [ 86.481367] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:15 rapter kernel: [ 86.481387] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:16 rapter kernel: [ 87.476065] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:16 rapter kernel: [ 87.674916] iwl3945: Error bad temperature value 53
Jun 19 15:01:17 rapter kernel: [ 87.876427] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:17 rapter kernel: [ 87.876452] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:17 rapter kernel: [ 88.871062] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:17 rapter kernel: [ 89.070550] iwl3945: Error bad temperature value 53
Jun 19 15:01:18 rapter kernel: [ 89.272210] iwl3945: Microcode SW error detected. Restarting 0x82000008.
Jun 19 15:01:18 rapter kernel: [ 89.272237] iwl3945: Error Reply type 0x00000005 cmd REPLY_RATE_SCALE (0x47) seq 0x0406 ser 0x0000004B
Jun 19 15:01:19 rapter kernel: [ 90.267103] iwl3945: Can't stop Rx DMA.
Jun 19 15:01:19 rapter kernel: [ 90.465741] iwl3945: Error bad temperature value 53
Jun 19 15:01:23 rapter kernel: [ 94.454764] iwl3945: Radio Frequency Kill Switch is On:
Jun 19 15:01:23 rapter kernel: [ 94.454770] Kill switch must be turned off for wireless networking to work.
Jun 19 15:01:30 rapter kernel: [ 101.877855] CPU0 attaching NULL sched-domain.
Jun 19 15:01:30 rapter kernel: [ 101.877861] CPU1 attaching NULL sched-domain.
Jun 19 15:01:30 rapter kernel: [ 101.899311] CPU0 attaching sched-domain:
Jun 19 15:01:30 rapter kernel: [ 101.899318] domain 0: span 03
Jun 19 15:01:30 rapter kernel: [ 101.899321] groups: 01 02
Jun 19 15:01:30 rapter kernel: [ 101.899327] CPU1 attaching sched-domain:
Jun 19 15:01:30 rapter kernel: [ 101.899330] domain 0: span 03
Jun 19 15:01:30 rapter kernel: [ 101.899333] groups: 02 01
Jun 19 15:02:19 rapter kernel: [ 118.839366] iwl3945: Error bad temperature value 53
Jun 19 15:03:19 rapter kernel: [ 138.471252] iwl3945: Error bad temperature value 53
Jun 19 15:04:19 rapter kernel: [ 152.598702] iwl3945: Error bad temperature value 53
Jun 19 15:05:19 rapter kernel: [ 162.786488] iwl3945: Error bad temperature value 53
Jun 19 15:06:19 rapter kernel: [ 177.868879] iwl3945: Error bad temperature value 53
Jun 19 15:07:19 rapter kernel: [ 191.656432] iwl3945: Error bad temperature value 53
Jun 19 15:08:19 rapter kernel: [ 205.460897] iwl3945: Error bad temperature value 53
Jun 19 15:09:19 rapter kernel: [ 220.949439] iwl3945: Error bad temperature value 53
Jun 19 15:10:19 rapter kernel: [ 233.314351] iwl3945: Error bad temperature value 53
Jun 19 15:11:19 rapter kernel: [ 247.222365] iwl3945: Error bad temperature value 53
Jun 19 15:12:19 rapter kernel: [ 268.829091] iwl3945: Error bad temperature value 53
Jun 19 15:13:19 rapter kernel: [ 291.386214] iwl3945: Error bad temperature value 53
Jun 19 15:14:19 rapter kernel: [ 313.499427] iwl3945: Error bad temperature value 53
Jun 19 15:15:19 rapter kernel: [ 337.243759] iwl3945: Error bad temperature value 53
Jun 19 15:16:19 rapter kernel: [ 353.707716] iwl3945: Error bad temperature value 53
Jun 19 15:17:19 rapter kernel: [ 371.771356] iwl3945: Error bad temperature value 53
Jun 19 15:18:19 rapter kernel: [ 380.196336] iwl3945: Error bad temperature value 53
Jun 19 15:19:19 rapter kernel: [ 395.064083] iwl3945: Error bad temperature value 53
Jun 19 15:20:19 rapter kernel: [ 406.290395] iwl3945: Error bad temperature value 53
Jun 19 15:21:19 rapter kernel: [ 426.355834] iwl3945: Error bad temperature value 53
Jun 19 15:22:19 rapter kernel: [ 438.368954] iwl3945: Error bad temperature value 53
Jun 19 15:23:19 rapter kernel: [ 448.173249] iwl3945: Error bad temperature value 53
Jun 19 15:24:19 rapter kernel: [ 458.452180] iwl3945: Error bad temperature value 53
Jun 19 15:25:19 rapter kernel: [ 468.388574] iwl3945: Error bad temperature value 53
Jun 19 15:26:19 rapter kernel: [ 477.853036] iwl3945: Error bad temperature value 53
Jun 19 15:27:19 rapter kernel: [ 487.735128] iwl3945: Error bad temperature value 53
Jun 19 15:28:19 rapter kernel: [ 498.347662] iwl3945: Error bad temperature value 53
Jun 19 15:28:40 rapter kernel: [ 502.476728] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4
Jun 19 15:28:40 rapter kernel: [ 502.478077] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Jun 19 15:28:40 rapter kernel: [ 502.487299] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched.
Jun 19 15:28:59 rapter kernel: [ 508.539440] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Jun 19 15:28:59 rapter kernel: [ 508.540731] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Jun 19 15:28:59 rapter kernel: [ 508.542706] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Jun 19 15:28:59 rapter kernel: [ 508.544093] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
Jun 19 15:28:59 rapter kernel: [ 508.556184] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched.
Jun 19 15:29:03 rapter kernel: [ 510.106922] atkbd.c: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
Jun 19 15:29:03 rapter kernel: [ 510.106933] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.
Jun 19 15:29:19 rapter kernel: [ 515.744106] iwl3945: Error bad temperature value 53
-----дальше продолжает в том же духе------
Jun 19 15:30:19 rapter kernel: [ 528.563108] iwl3945: Error bad temperature value 53