sound

Asked by Adnan Iftekhar

When i play any audio or video file movie player gives error

Failed to connect stream: Invalid argument

in multimedia selector

ALSA - Advanced Linux Sound Architecture: Failed to connect stream: Invalid argument

OSS - Open Sound System: Failed to connect stream: Invalid argument

after log out and login again sound works normally

~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
03:02.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
03:03.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f7f8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f7f8000 - 000000001f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fb960
[ 0.000000] Entering add_active_range(0, 0, 129008) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 129008
[ 0.000000] HighMem 129008 -> 129008
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 129008
[ 0.000000] On node 0 totalpages: 129008
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123937 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA000 checksum 0
[ 0.000000] ACPI: RSDP 000FA000, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1F7F0000, 002C (r1 AMIINT INTEL845 10 MSFT 97)
[ 0.000000] ACPI: FACP 1F7F0030, 0081 (r1 AMIINT INTEL845 11 MSFT 97)
[ 0.000000] ACPI: DSDT 1F7F0120, 36C6 (r1 INTEL BROKDLEG 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1F7F8000, 0040
[ 0.000000] ACPI: APIC 1F7F00C0, 005C (r1 AMIINT INTEL845 9 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000cc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000cc000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128001
[ 0.000000] Kernel command line: root=UUID=5d680b8c-2e81-4e48-b0a3-a824eb0f93ba ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2399.069 MHz processor.
[ 15.221090] Console: colour VGA+ 80x25
[ 15.221096] console [tty0] enabled
[ 15.221510] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.221853] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.232244] Memory: 499108k/516032k available (2157k kernel code, 16244k reserved, 998k data, 364k init, 0k highmem)
[ 15.232254] virtual kernel memory layout:
[ 15.232255] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.232257] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.232258] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 15.232259] lowmem : 0xc0000000 - 0xdf7f0000 ( 503 MB)
[ 15.232261] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 15.232262] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 15.232263] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 15.232267] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.232311] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 15.312175] Calibrating delay using timer specific routine.. 4802.17 BogoMIPS (lpj=9604345)
[ 15.312203] Security Framework initialized
[ 15.312208] SELinux: Disabled at boot.
[ 15.312225] AppArmor: AppArmor initialized
[ 15.312230] Failure registering capabilities with primary security module.
[ 15.312240] Mount-cache hash table entries: 512
[ 15.312386] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
[ 15.312397] monitor/mwait feature present.
[ 15.312400] using mwait in idle threads.
[ 15.312407] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.312410] CPU: L2 cache: 1024K
[ 15.312413] CPU: Hyper-Threading is disabled
[ 15.312416] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
[ 15.312429] Compat vDSO mapped to ffffe000.
[ 15.312447] Checking 'hlt' instruction... OK.
[ 15.328669] SMP alternatives: switching to UP code
[ 15.330803] Freeing SMP alternatives: 11k freed
[ 15.330948] Early unpacking initramfs... done
[ 15.715707] ACPI: Core revision 20070126
[ 15.715768] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.718192] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 01
[ 15.718239] Total of 1 processors activated (4802.17 BogoMIPS).
[ 15.718374] ENABLING IO-APIC IRQs
[ 15.718560] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.863144] Brought up 1 CPUs
[ 15.863172] CPU0 attaching sched-domain:
[ 15.863176] domain 0: span 01
[ 15.863179] groups: 01
[ 15.863388] net_namespace: 64 bytes
[ 15.863398] Booting paravirtualized kernel on bare hardware
[ 15.864097] Time: 18:25:53 Date: 05/21/08
[ 15.864126] NET: Registered protocol family 16
[ 15.864394] EISA bus registered
[ 15.864420] ACPI: bus type pci registered
[ 15.879616] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
[ 15.879619] PCI: Using configuration type 1
[ 15.879621] Setting up standard PCI resources
[ 15.883860] ACPI: EC: Look up EC in DSDT
[ 15.888526] ACPI: Interpreter enabled
[ 15.888530] ACPI: (supports S0 S1 S4 S5)
[ 15.888548] ACPI: Using IOAPIC for interrupt routing
[ 15.893687] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.894188] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 15.894190] * this clock source is slow. If you are sure your timer does not have
[ 15.894192] * this bug, please use "acpi_pm_good" to disable the workaround
[ 15.894242] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 15.894246] PCI quirk: region 0400-043f claimed by ICH4 GPIO
[ 15.894594] PCI: Transparent bridge - 0000:00:1e.0
[ 15.894620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.894759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 15.907690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 15.907811] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 15.907933] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 15.908092] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 15.908212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.908337] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.908460] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.908618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.908747] ACPI: Power Resource [URP1] (off)
[ 15.908786] ACPI: Power Resource [URP2] (off)
[ 15.908825] ACPI: Power Resource [FDDP] (off)
[ 15.908862] ACPI: Power Resource [LPTP] (off)
[ 15.908915] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.908957] pnp: PnP ACPI init
[ 15.908965] ACPI: bus type pnp registered
[ 15.912074] pnp: PnP ACPI: found 11 devices
[ 15.912077] ACPI: ACPI bus type pnp unregistered
[ 15.912082] PnPBIOS: Disabled by ACPI PNP
[ 15.912387] PCI: Using ACPI for IRQ routing
[ 15.912391] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.926988] NET: Registered protocol family 8
[ 15.926991] NET: Registered protocol family 20
[ 15.927075] AppArmor: AppArmor Filesystem Enabled
[ 15.930958] Time: tsc clocksource has been installed.
[ 15.938993] system 00:01: ioport range 0x290-0x297 has been reserved
[ 15.938997] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 15.939000] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 15.939003] system 00:01: ioport range 0x400-0x43f has been reserved
[ 15.939006] system 00:01: ioport range 0xc00-0xc1f has been reserved
[ 15.939010] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 15.969512] PCI: Bridge: 0000:00:1e.0
[ 15.969517] IO window: c000-cfff
[ 15.969524] MEM window: ddd00000-dfdfffff
[ 15.969528] PREFETCH window: disabled.
[ 15.969544] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.969557] NET: Registered protocol family 2
[ 16.006901] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 16.007189] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.007295] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.007400] TCP: Hash tables configured (established 16384 bind 16384)
[ 16.007402] TCP reno registered
[ 16.018941] checking if image is initramfs... it is
[ 16.469897] Switched to high resolution mode on CPU 0
[ 16.773678] Freeing initrd memory: 7703k freed
[ 16.774578] audit: initializing netlink socket (disabled)
[ 16.774598] audit(1211394353.440:1): initialized
[ 16.777169] VFS: Disk quotas dquot_6.5.1
[ 16.777279] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.777459] io scheduler noop registered
[ 16.777462] io scheduler anticipatory registered
[ 16.777464] io scheduler deadline registered
[ 16.777478] io scheduler cfq registered (default)
[ 16.777494] Boot video device is 0000:00:02.0
[ 16.777882] isapnp: Scanning for PnP cards...
[ 17.129432] isapnp: No Plug & Play device found
[ 17.169538] Real Time Clock Driver v1.12ac
[ 17.169662] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.169795] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.170766] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.171741] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.171826] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.171959] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 17.174525] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.174531] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.184520] mice: PS/2 mouse device common for all mice
[ 17.184673] EISA: Probing bus 0 at eisa.0
[ 17.184712] EISA: Detected 0 cards.
[ 17.184716] cpuidle: using governor ladder
[ 17.184719] cpuidle: using governor menu
[ 17.184823] NET: Registered protocol family 1
[ 17.184858] Using IPI No-Shortcut mode
[ 17.184898] registered taskstats version 1
[ 17.184990] Magic number: 8:854:443
[ 17.185116] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.185119] EDD information not available.
[ 17.185527] Freeing unused kernel memory: 364k freed
[ 17.212406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.438368] fuse init (API version 7.9)
[ 18.462879] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.462897] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 18.901020] usbcore: registered new interface driver usbfs
[ 18.901053] usbcore: registered new interface driver hub
[ 18.909016] usbcore: registered new device driver usb
[ 18.921983] USB Universal Host Controller Interface driver v3.0
[ 18.922069] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.922084] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 18.922088] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.922407] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 18.922440] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400
[ 18.922616] usb usb1: configuration #1 chosen from 1 choice
[ 18.922649] hub 1-0:1.0: USB hub found
[ 18.922658] hub 1-0:1.0: 2 ports detected
[ 19.024874] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 19.024890] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.024896] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.024933] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 19.024962] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 19.025098] usb usb2: configuration #1 chosen from 1 choice
[ 19.025130] hub 2-0:1.0: USB hub found
[ 19.025138] hub 2-0:1.0: 2 ports detected
[ 19.128670] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.128688] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.128693] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.128726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 19.128757] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 19.128909] usb usb3: configuration #1 chosen from 1 choice
[ 19.128942] hub 3-0:1.0: USB hub found
[ 19.128950] hub 3-0:1.0: 2 ports detected
[ 19.172661] SCSI subsystem initialized
[ 19.228356] libata version 3.00 loaded.
[ 19.232580] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 19.232596] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 19.232601] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.232635] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 19.236532] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.236540] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 19.237315] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdff7bc00
[ 19.252310] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.252472] usb usb4: configuration #1 chosen from 1 choice
[ 19.252514] hub 4-0:1.0: USB hub found
[ 19.252524] hub 4-0:1.0: 6 ports detected
[ 19.356342] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 19.356410] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.356426] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 19.363005] FDC 0 is a post-1991 82077
[ 19.380050] ata_piix 0000:00:1f.1: version 2.12
[ 19.380075] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 19.380139] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.388961] scsi0 : ata_piix
[ 19.389950] scsi1 : ata_piix
[ 19.391701] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 19.391705] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 19.598403] ata1.00: ATA-7: ST3802110A, 3.AAD, max UDMA/100
[ 19.598409] ata1.00: 156301488 sectors, multi 16: LBA48
[ 19.664856] ata1.00: configured for UDMA/100
[ 20.162753] ata2.00: ATAPI: AOPEN CD-RW CRW4048 1.07 20020620, 1.07, max UDMA/33
[ 20.162790] ata2.01: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS06, max UDMA/33
[ 20.334348] ata2.00: configured for UDMA/33
[ 20.521968] ata2.01: configured for UDMA/33
[ 20.522128] scsi 0:0:0:0: Direct-Access ATA ST3802110A 3.AA PQ: 0 ANSI: 5
[ 20.524105] scsi 1:0:0:0: CD-ROM AOPEN CD-RW CRW4048 1.07 PQ: 0 ANSI: 5
[ 20.524811] scsi 1:0:1:0: CD-ROM TSSTcorp CDW/DVD SH-M522C TS06 PQ: 0 ANSI: 5
[ 20.536385] Driver 'sd' needs updating - please use bus_type methods
[ 20.536495] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 20.536514] sd 0:0:0:0: [sda] Write Protect is off
[ 20.536518] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.536545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.536615] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 20.536631] sd 0:0:0:0: [sda] Write Protect is off
[ 20.536635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.536660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.536665] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 20.559813] sda1 sda2 < sda5 sda6 >
[ 20.568900] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.578000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.578027] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 20.578050] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 20.579737] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 20.579744] Uniform CD-ROM driver Revision: 3.20
[ 20.579811] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 20.583610] sr1: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
[ 20.583671] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 21.128779] Attempting manual resume
[ 21.128784] swsusp: Resume From Partition 8:6
[ 21.128786] PM: Checking swsusp image.
[ 21.142595] PM: Resume from disk failed.
[ 21.184767] kjournald starting. Commit interval 5 seconds
[ 21.184780] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.915054] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 28.254988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.279645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.386364] intel_rng: FWH not detected
[ 28.413897] Linux agpgart interface v0.102
[ 28.436486] agpgart: Detected an Intel 830M Chipset.
[ 28.436953] agpgart: Detected 8060K stolen memory.
[ 28.463059] agpgart: AGP aperture is 128M @ 0xd0000000
[ 28.737988] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 28.798057] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 28.821096] iTCO_vendor_support: vendor-support=0
[ 28.880130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 28.880239] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[ 28.880278] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.060077] input: Power Button (FF) as /devices/virtual/input/input4
[ 29.068556] ACPI: Power Button (FF) [PWRF]
[ 29.068668] input: Power Button (CM) as /devices/virtual/input/input5
[ 29.085781] ACPI: Power Button (CM) [PWRB]
[ 30.873494] Linux video capture interface: v2.00
[ 30.936982] hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
[ 31.108625] parport_pc 00:0a: reported by Plug and Play ACPI
[ 31.108723] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 31.208592] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 31.400100] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 32.251318] ttySHSF0 at I/O 0xcc00 (irq = 20) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2005)
[ 32.251464] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 32.251544] cx88[0]: Your board has no valid PCI Subsystem ID and thus can't
[ 32.251546] cx88[0]: be autodetected. Please pass card=<n> insmod option to
[ 32.251548] cx88[0]: workaround that. Redirect complaints to the vendor of
[ 32.251549] cx88[0]: the TV card. Best regards,
[ 32.251550] cx88[0]: -- tux
[ 32.251553] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 32.251556] cx88[0]: card=0 -> UNKNOWN/GENERIC
[ 32.251558] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
[ 32.251560] cx88[0]: card=2 -> GDI Black Gold
[ 32.251562] cx88[0]: card=3 -> PixelView
[ 32.251564] cx88[0]: card=4 -> ATI TV Wonder Pro
[ 32.251567] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
[ 32.251569] cx88[0]: card=6 -> AverTV Studio 303 (M126)
[ 32.251571] cx88[0]: card=7 -> MSI TV-@nywhere Master
[ 32.251573] cx88[0]: card=8 -> Leadtek Winfast DV2000
[ 32.251576] cx88[0]: card=9 -> Leadtek PVR 2000
[ 32.251578] cx88[0]: card=10 -> IODATA GV-VCP3/PCI
[ 32.251580] cx88[0]: card=11 -> Prolink PlayTV PVR
[ 32.251582] cx88[0]: card=12 -> ASUS PVR-416
[ 32.251584] cx88[0]: card=13 -> MSI TV-@nywhere
[ 32.251586] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
[ 32.251588] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
[ 32.251591] cx88[0]: card=16 -> KWorld LTV883RF
[ 32.251593] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
[ 32.251595] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
[ 32.251597] cx88[0]: card=19 -> Conexant DVB-T reference design
[ 32.251599] cx88[0]: card=20 -> Provideo PV259
[ 32.251602] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
[ 32.251604] cx88[0]: card=22 -> pcHDTV HD3000 HDTV
[ 32.251606] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
[ 32.251608] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[ 32.251611] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[ 32.251613] cx88[0]: card=26 -> IODATA GV/BCTV7E
[ 32.251616] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[ 32.251618] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
[ 32.251620] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
[ 32.251622] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
[ 32.251625] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
[ 32.251627] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
[ 32.251629] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
[ 32.251632] cx88[0]: card=34 -> ATI HDTV Wonder
[ 32.251634] cx88[0]: card=35 -> WinFast DTV1000-T
[ 32.251636] cx88[0]: card=36 -> AVerTV 303 (M126)
[ 32.251638] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
[ 32.251640] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
[ 32.251643] cx88[0]: card=39 -> KWorld DVB-S 100
[ 32.251645] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[ 32.251647] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[ 32.251650] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
[ 32.251652] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
[ 32.251655] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[ 32.251657] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
[ 32.251659] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
[ 32.251662] cx88[0]: card=47 -> pcHDTV HD5500 HDTV
[ 32.251664] cx88[0]: card=48 -> Kworld MCE 200 Deluxe
[ 32.251666] cx88[0]: card=49 -> PixelView PlayTV P7000
[ 32.251668] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
[ 32.251671] cx88[0]: card=51 -> WinFast DTV2000 H
[ 32.251673] cx88[0]: card=52 -> Geniatech DVB-S
[ 32.251675] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[ 32.251678] cx88[0]: card=54 -> Norwood Micro TV Tuner
[ 32.251680] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[ 32.251683] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[ 32.251685] cx88[0]: card=57 -> ADS Tech Instant Video PCI
[ 32.251689] cx88[0]: subsystem: 0000:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 32.251692] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 32.371275] tveeprom 2-0050: Huh, no eeprom present (err=-121)?
[ 32.371292] cx88[0]/0: found at 0000:03:03.0, rev: 5, irq: 19, latency: 32, mmio: 0xde000000
[ 32.424041] All bytes are equal. It is not a TEA5767
[ 32.424048] tuner 2-0060: chip found @ 0xc0 (cx88[0])
[ 32.424220] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 32.431771] cx88[0]/0: registered device video0 [v4l2]
[ 32.431799] cx88[0]/0: registered device vbi0
[ 32.431812] tuner 2-0060: tuner type not set
[ 32.433967] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
[ 32.433998] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 32.757150] intel8x0_measure_ac97_clock: measured 55727 usecs
[ 32.757156] intel8x0: clocking to 48000
[ 33.905724] lp0: using parport0 (interrupt-driven).
[ 33.961090] Adding 2096408k swap on /dev/sda6. Priority:-1 extents:1 across:2096408k
[ 34.515030] EXT3 FS on sda1, internal journal
[ 35.277437] kjournald starting. Commit interval 5 seconds
[ 35.277643] EXT3 FS on sda5, internal journal
[ 35.277649] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.894362] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.151035] PPP generic driver version 2.4.2
[ 36.200736] NET: Registered protocol family 10
[ 36.201019] lo: Disabled Privacy Extensions
[ 36.814549] No dock devices found.
[ 38.118268] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 38.118275] apm: overridden by ACPI.
[ 38.250959] ppdev: user-space parallel port driver
[ 38.371872] audit(1211394375.548:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4874 profile="/usr/sbin/cupsd" namespace="default"
[ 39.315764] Bluetooth: Core ver 2.11
[ 39.316944] NET: Registered protocol family 31
[ 39.316950] Bluetooth: HCI device and connection manager initialized
[ 39.316955] Bluetooth: HCI socket layer initialized
[ 39.346983] Bluetooth: L2CAP ver 2.9
[ 39.346989] Bluetooth: L2CAP socket layer initialized
[ 39.411649] Bluetooth: RFCOMM socket layer initialized
[ 39.411669] Bluetooth: RFCOMM TTY layer initialized
[ 39.411672] Bluetooth: RFCOMM ver 1.8
[ 42.012332] [drm] Initialized drm 1.1.0 20060810
[ 42.047610] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.047622] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 42.047725] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 303.624548] tuner 2-0060: tuner type not set
[ 304.193841] tuner 2-0060: tuner type not set
 Bhavani Shankar said on 2008-05-22:

Hello

Hmm its a known bug in ubuntu hardy and its under work

ref:

https://bugs.edge.launchpad.net/ubuntu/+source/totem/+bug/191027

Hope it helps

Bhavani Shankar.
 Adnan Iftekhar said on 2008-06-11:

i cant understand. Is this error is also present in kubuntu 8.04. and plz tell me how i can repair it. i shall be very thankful to you.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Bhavani Shankar
Solved:
Last query:
Last reply:
Revision history for this message
Best Bhavani Shankar (bhavi) said :
#1
Revision history for this message
Adnan Iftekhar (0000-inbox-deactivatedaccount) said :
#2

Thanks Bhavani Shankar, that solved my question.