Ubuntu

Ubuntu 8.04 Loss of WLAN-connection after some minutes

Asked by thomas.grond on 2008-05-27

I upgraded from Ubuntu 7.xx to 8.04. As in 7.xx I have the problem, that my WLAN is down after a few minutes. On the same system I have Windows Vista Home (dual boot) and there I have no problem with the WLAN. My system is a HP Pavillon m8000, as a Ubuntu/Linux/Unix-Newby I was not able to figure out the configuration. Any ideas somebody? Thanks a lot in advance.

Question information

Language:: English Edit question

Status:: Solved

For:: Ubuntu Edit question

Assignee:: No assignee Edit question

Solved by:: thomas.grond

Solved:: 2008-05-29

Last query:: 2008-05-29

Last reply:: 2008-05-28

Link existing bug

Revision history for this message

Andrew Gee (andrewgee) said on 2008-05-27:

Could you provide output from the commands "lspci", "lsusb", and "dmesg" when the wireless connection goes down?

This should help someone find a solution.

Revision history for this message

thomas.grond (thomas-grond) said on 2008-05-28:

Dear Andrew

Thank you very much for your quick respone. As Murphy - the famous one - is reading this post as well the WLAN did run for several hours without problem. I hate it when computers do that to me. Could it be that there was some kind of update in ubuntu in the last two days?

In any case I executed the three commands you provided (with running WLAN):

thomas@thomas-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
02:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
thomas@thomas-desktop:~$

thomas@thomas-desktop:~$ lsusb
Bus 008 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 004: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 003: ID 0bda:0111 Realtek Semiconductor Corp.
Bus 004 Device 002: ID 15a9:0004
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 03f0:070c Hewlett-Packard
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 03f0:0f0c Hewlett-Packard
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
thomas@thomas-desktop:~$

[ 61.025446] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)

[ 61.025447] .init : 0xc0421000 - 0xc047d000 ( 368 kB)

[ 61.025448] .data : 0xc0320134 - 0xc041bdc4 (1007 kB)

[ 61.025449] .text : 0xc0100000 - 0xc0320134 (2176 kB)

[ 61.025451] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[ 61.025485] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1

[ 61.025595] hpet clockevent registered

[ 61.105461] Calibrating delay using timer specific routine.. 4791.96 BogoMIPS (lpj=9583936)

[ 61.105478] Security Framework initialized

[ 61.105483] SELinux: Disabled at boot.

[ 61.105494] AppArmor: AppArmor initialized

[ 61.105497] Failure registering capabilities with primary security module.

[ 61.105503] Mount-cache hash table entries: 512

[ 61.105606] Initializing cgroup subsys ns

[ 61.105610] Initializing cgroup subsys cpuacct

[ 61.105619] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[ 61.105624] monitor/mwait feature present.

[ 61.105625] using mwait in idle threads.

[ 61.105628] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 61.105630] CPU: L2 cache: 4096K

[ 61.105632] CPU: Physical Processor ID: 0

[ 61.105633] CPU: Processor Core ID: 0

[ 61.105635] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[ 61.105642] Compat vDSO mapped to ffffe000.

[ 61.105653] Checking 'hlt' instruction... OK.

[ 61.121817] SMP alternatives: switching to UP code

[ 61.123103] Early unpacking initramfs... done

[ 61.361054] ACPI: Core revision 20070126

[ 61.361086] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[ 61.466174] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07

[ 61.466186] SMP alternatives: switching to SMP code

[ 61.466753] Booting processor 1/1 eip 3000

[ 61.477079] Initializing CPU#1

[ 61.556671] Calibrating delay using timer specific routine.. 4787.91 BogoMIPS (lpj=9575827)

[ 61.556676] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[ 61.556680] monitor/mwait feature present.

[ 61.556682] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 61.556683] CPU: L2 cache: 4096K

[ 61.556685] CPU: Physical Processor ID: 0

[ 61.556686] CPU: Processor Core ID: 1

[ 61.556687] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[ 61.557317] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07

[ 61.557339] SMP alternatives: switching to SMP code

[ 61.557952] Booting processor 2/2 eip 3000

[ 61.568207] Initializing CPU#2

[ 61.648511] Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=9575999)

[ 61.648516] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[ 61.648520] monitor/mwait feature present.

[ 61.648523] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 61.648524] CPU: L2 cache: 4096K

[ 61.648525] CPU: Physical Processor ID: 0

[ 61.648526] CPU: Processor Core ID: 2

[ 61.648527] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[ 61.649091] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07

[ 61.649101] SMP alternatives: switching to SMP code

[ 61.649486] Booting processor 3/3 eip 3000

[ 61.659740] Initializing CPU#3

[ 61.736358] Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=9575981)

[ 61.736363] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[ 61.736367] monitor/mwait feature present.

[ 61.736369] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 61.736371] CPU: L2 cache: 4096K

[ 61.736372] CPU: Physical Processor ID: 0

[ 61.736373] CPU: Processor Core ID: 3

[ 61.736374] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[ 61.736977] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07

[ 61.736992] Total of 4 processors activated (19155.87 BogoMIPS).

[ 61.737172] ENABLING IO-APIC IRQs

[ 61.737339] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 61.884175] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

[ 61.904178] checking TSC synchronization [CPU#0 -> CPU#2]: passed.

[ 61.924188] checking TSC synchronization [CPU#0 -> CPU#3]: passed.

[ 61.944169] Brought up 4 CPUs

[ 61.944212] CPU0 attaching sched-domain:

[ 61.944214] domain 0: span 03

[ 61.944215] groups: 01 02

[ 61.944218] domain 1: span 0f

[ 61.944219] groups: 03 0c

[ 61.944221] CPU1 attaching sched-domain:

[ 61.944222] domain 0: span 03

[ 61.944223] groups: 02 01

[ 61.944228] domain 1: span 0f

[ 61.944229] groups: 03 0c

[ 61.944231] CPU2 attaching sched-domain:

[ 61.944232] domain 0: span 0c

[ 61.944234] groups: 04 08

[ 61.944235] domain 1: span 0f

[ 61.944237] groups: 0c 03

[ 61.944239] CPU3 attaching sched-domain:

[ 61.944240] domain 0: span 0c

[ 61.944241] groups: 08 04

[ 61.944243] domain 1: span 0f

[ 61.944244] groups: 0c 03

[ 61.944533] net_namespace: 64 bytes

[ 61.944539] Booting paravirtualized kernel on bare hardware

[ 61.944867] Time: 19:45:14 Date: 05/27/08

[ 61.944887] NET: Registered protocol family 16

[ 61.945034] EISA bus registered

[ 61.945038] ACPI: bus type pci registered

[ 61.945219] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2

[ 61.945220] PCI: Using configuration type 1

[ 61.945222] Setting up standard PCI resources

[ 61.948130] ACPI: EC: Look up EC in DSDT

[ 61.950725] ACPI: Interpreter enabled

[ 61.950727] ACPI: (supports S0 S1 S3 S4 S5)

[ 61.950746] ACPI: Using IOAPIC for interrupt routing

[ 61.955298] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 61.956088] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[ 61.956092] PCI quirk: region 0480-04bf claimed by ICH6 GPIO

[ 61.956575] PCI: Transparent bridge - 0000:00:1e.0

[ 61.956597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 61.956700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 61.966150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 61.966234] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 61.966316] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 61.966399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 61.966482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 61.966565] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)

[ 61.966649] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)

[ 61.966731] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 61.966830] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 61.966853] pnp: PnP ACPI init

[ 61.966858] ACPI: bus type pnp registered

[ 61.968490] pnp: PnP ACPI: found 14 devices

[ 61.968492] ACPI: ACPI bus type pnp unregistered

[ 61.968495] PnPBIOS: Disabled by ACPI PNP

[ 61.968687] PCI: Using ACPI for IRQ routing

[ 61.968688] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 61.996008] NET: Registered protocol family 8

[ 61.996010] NET: Registered protocol family 20

[ 61.996047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 61.996052] hpet0: 4 64-bit timers, 14318180 Hz

[ 61.997077] AppArmor: AppArmor Filesystem Enabled

[ 62.000015] Time: tsc clocksource has been installed.

[ 62.000022] Switched to high resolution mode on CPU 0

[ 62.000094] Switched to high resolution mode on CPU 1

[ 62.000605] Switched to high resolution mode on CPU 2

[ 62.000646] Switched to high resolution mode on CPU 3

[ 62.012031] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

[ 62.012040] system 00:06: ioport range 0x4d0-0x4d1 has been reserved

[ 62.012043] system 00:06: ioport range 0x800-0x87f has been reserved

[ 62.012046] system 00:06: ioport range 0x480-0x4bf has been reserved

[ 62.012049] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 62.012052] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved

[ 62.012058] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved

[ 62.012061] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved

[ 62.012067] system 00:09: ioport range 0xa00-0xadf has been reserved

[ 62.012074] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved

[ 62.012080] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved

[ 62.012086] system 00:0d: iomem range 0x0-0x9ffff could not be reserved

[ 62.012089] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved

[ 62.012092] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved

[ 62.012095] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved

[ 62.012098] system 00:0d: iomem range 0x0-0x0 could not be reserved

[ 62.042419] PCI: Bridge: 0000:00:01.0

[ 62.042421] IO window: e000-efff

[ 62.042423] MEM window: fa000000-febfffff

[ 62.042426] PREFETCH window: d0000000-dfffffff

[ 62.042428] PCI: Bridge: 0000:00:1e.0

[ 62.042429] IO window: disabled.

[ 62.042434] MEM window: f9f00000-f9ffffff

[ 62.042437] PREFETCH window: disabled.

[ 62.042449] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 62.042453] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 62.042463] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[ 62.042471] NET: Registered protocol family 2

[ 62.079912] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 62.080125] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 62.080458] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 62.080627] TCP: Hash tables configured (established 131072 bind 65536)

[ 62.080628] TCP reno registered

[ 62.091967] checking if image is initramfs... it is

[ 62.560738] Freeing initrd memory: 7283k freed

[ 62.562012] audit: initializing netlink socket (disabled)

[ 62.562025] audit(1211917513.280:1): initialized

[ 62.562309] highmem bounce pool size: 64 pages

[ 62.564840] VFS: Disk quotas dquot_6.5.1

[ 62.564920] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 62.565080] io scheduler noop registered

[ 62.565082] io scheduler anticipatory registered

[ 62.565083] io scheduler deadline registered

[ 62.565090] io scheduler cfq registered (default)

[ 62.565221] Boot video device is 0000:02:00.0

[ 62.565358] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 62.565384] assign_interrupt_mode Found MSI capability

[ 62.565406] Allocate Port Service[0000:00:01.0:pcie00]

[ 62.565704] isapnp: Scanning for PnP cards...

[ 62.918203] isapnp: No Plug & Play device found

[ 62.951280] Real Time Clock Driver v1.12ac

[ 62.951455] hpet_resources: 0xfed00000 is busy

[ 62.951521] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 62.952999] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 62.953084] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 62.953262] PNP: No PS/2 controller found. Probing ports directly.

[ 62.955402] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 62.955406] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 62.971421] mice: PS/2 mouse device common for all mice

[ 62.971555] EISA: Probing bus 0 at eisa.0

[ 62.971592] EISA: Detected 0 cards.

[ 62.971594] cpuidle: using governor ladder

[ 62.971595] cpuidle: using governor menu

[ 62.971651] NET: Registered protocol family 1

[ 62.971670] Using IPI No-Shortcut mode

[ 62.971690] registered taskstats version 1

[ 62.971770] Magic number: 8:275:800

[ 62.971784] hash matches device ptyr8

[ 62.971794] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 62.971795] EDD information not available.

[ 62.971886] Freeing unused kernel memory: 368k freed

[ 64.138483] fuse init (API version 7.9)

[ 64.240804] usbcore: registered new interface driver usbfs

[ 64.240820] usbcore: registered new interface driver hub

[ 64.240838] usbcore: registered new device driver usb

[ 64.241629] USB Universal Host Controller Interface driver v3.0

[ 64.241668] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 64.241675] PCI: Setting latency timer of device 0000:00:1a.0 to 64

[ 64.241679] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 64.241853] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 64.241877] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c080

[ 64.241967] usb usb1: configuration #1 chosen from 1 choice

[ 64.241984] hub 1-0:1.0: USB hub found

[ 64.241987] hub 1-0:1.0: 2 ports detected

[ 64.325936] SCSI subsystem initialized

[ 64.331219] libata version 3.00 loaded.

[ 64.347974] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17

[ 64.347983] PCI: Setting latency timer of device 0000:00:1a.1 to 64

[ 64.347986] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 64.348003] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[ 64.348028] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000c400

[ 64.348110] usb usb2: configuration #1 chosen from 1 choice

[ 64.348127] hub 2-0:1.0: USB hub found

[ 64.348131] hub 2-0:1.0: 2 ports detected

[ 64.447904] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18

[ 64.447916] PCI: Setting latency timer of device 0000:00:1a.7 to 64

[ 64.447919] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 64.447944] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3

[ 64.451841] ehci_hcd 0000:00:1a.7: debug port 1

[ 64.451846] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

[ 64.451853] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9eff400

[ 64.467684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 64.467785] usb usb3: configuration #1 chosen from 1 choice

[ 64.467803] hub 3-0:1.0: USB hub found

[ 64.467807] hub 3-0:1.0: 4 ports detected

[ 64.573117] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19

[ 64.573136] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[ 64.573139] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 64.573156] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4

[ 64.577049] ehci_hcd 0000:00:1d.7: debug port 1

[ 64.577054] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[ 64.577064] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9eff800

[ 64.593003] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 64.593076] usb usb4: configuration #1 chosen from 1 choice

[ 64.593093] hub 4-0:1.0: USB hub found

[ 64.593096] hub 4-0:1.0: 8 ports detected

[ 64.695387] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19

[ 64.695398] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[ 64.695403] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 64.695434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[ 64.695459] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c480

[ 64.695595] usb usb5: configuration #1 chosen from 1 choice

[ 64.695613] hub 5-0:1.0: USB hub found

[ 64.695617] hub 5-0:1.0: 2 ports detected

[ 64.799197] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20

[ 64.799205] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[ 64.799209] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 64.799231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[ 64.799257] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c800

[ 64.799393] usb usb6: configuration #1 chosen from 1 choice

[ 64.799410] hub 6-0:1.0: USB hub found

[ 64.799413] hub 6-0:1.0: 2 ports detected

[ 64.903017] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[ 64.903025] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[ 64.903029] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 64.903051] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7

[ 64.903073] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880

[ 64.903197] usb usb7: configuration #1 chosen from 1 choice

[ 64.903220] hub 7-0:1.0: USB hub found

[ 64.903223] hub 7-0:1.0: 2 ports detected

[ 64.970848] usb 3-1: new high speed USB device using ehci_hcd and address 2

[ 65.006836] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16

[ 65.006844] PCI: Setting latency timer of device 0000:00:1d.3 to 64

[ 65.006847] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 65.006869] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8

[ 65.006892] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00

[ 65.007015] usb usb8: configuration #1 chosen from 1 choice

[ 65.007038] hub 8-0:1.0: USB hub found

[ 65.007041] hub 8-0:1.0: 2 ports detected

[ 65.110675] ata_piix 0000:00:1f.2: version 2.12

[ 65.110681] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 65.110708] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20

[ 65.110737] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 65.110824] scsi0 : ata_piix

[ 65.110892] scsi1 : ata_piix

[ 65.110972] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[ 65.110976] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN0._GTM] (Node f7c4c3a8), AE_NOT_FOUND

[ 65.111026] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[ 65.111029] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN1._GTM] (Node f7c4c498), AE_NOT_FOUND

[ 65.111057] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14

[ 65.111059] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15

[ 65.118339] usb 3-1: configuration #1 chosen from 1 choice

[ 65.274575] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7

[ 65.274579] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 65.282534] ata1.00: configured for UDMA/133

[ 65.543386] usb 4-4: new high speed USB device using ehci_hcd and address 2

[ 65.781665] ata2.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33

[ 65.781685] ata2.01: ATAPI: ASUS DVD-E616A3T, CP07, max UDMA/33

[ 65.781687] ata2.01: applying bridge limits

[ 65.838895] usb 4-4: configuration #1 chosen from 1 choice

[ 65.954889] ata2.00: configured for UDMA/33

[ 66.076891] usb 4-5: new high speed USB device using ehci_hcd and address 3

[ 66.158530] ata2.01: configured for UDMA/33

[ 66.158647] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5

[ 66.160599] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5

[ 66.183233] scsi 1:0:1:0: CD-ROM ASUS DVD-E616A3T CP07 PQ: 0 ANSI: 5

[ 66.183299] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[ 66.183327] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 20

[ 66.183356] PCI: Setting latency timer of device 0000:00:1f.5 to 64

[ 66.183398] scsi2 : ata_piix

[ 66.183464] scsi3 : ata_piix

[ 66.183526] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[ 66.183530] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN0._GTM] (Node f7c4cae0), AE_NOT_FOUND

[ 66.183573] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[ 66.183576] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN1._GTM] (Node f7c4cbd0), AE_NOT_FOUND

[ 66.183600] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20

[ 66.183601] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20

[ 66.226344] usb 4-5: configuration #1 chosen from 1 choice

[ 66.464731] usb 4-7: new high speed USB device using ehci_hcd and address 4

[ 66.510988] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 21

[ 66.562656] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[f9fff000-f9fff7ff] Max Packet=[1024] IR/IT contexts=[8/8]

[ 66.602178] Driver 'sr' needs updating - please use bus_type methods

[ 66.603996] Driver 'sd' needs updating - please use bus_type methods

[ 66.605002] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)

[ 66.605012] sd 0:0:0:0: [sda] Write Protect is off

[ 66.605014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 66.605026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 66.605065] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)

[ 66.605073] sd 0:0:0:0: [sda] Write Protect is off

[ 66.605074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 66.605086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 66.605089] sda:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray

[ 66.612307] Uniform CD-ROM driver Revision: 3.20

[ 66.612340] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 66.617682] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray

[ 66.617739] sr 1:0:1:0: Attached scsi CD-ROM sr1

[ 66.621238] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 66.621253] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 66.621267] sr 1:0:1:0: Attached scsi generic sg2 type 5

[ 66.645379] usb 4-7: configuration #1 chosen from 1 choice

[ 66.645554] hub 4-7:1.0: USB hub found

[ 66.645658] hub 4-7:1.0: 4 ports detected

[ 66.646921] sda1 sda2 sda3 sda4

[ 66.672284] sd 0:0:0:0: [sda] Attached SCSI disk

[ 66.997815] Attempting manual resume

[ 66.997818] swsusp: Resume From Partition 8:4

[ 66.997819] PM: Checking swsusp image.

[ 66.997968] PM: Resume from disk failed.

[ 67.029273] kjournald starting. Commit interval 5 seconds

[ 67.029288] EXT3-fs: mounted filesystem with ordered data mode.

[ 67.132146] usbcore: registered new interface driver libusual

[ 67.371642] usb 2-1: new low speed USB device using uhci_hcd and address 2

[ 67.438364] Initializing USB Mass Storage driver...

[ 67.551597] usb 2-1: configuration #1 chosen from 1 choice

[ 67.554682] scsi4 : SCSI emulation for USB Mass Storage devices

[ 67.554753] usb-storage: device found at 2

[ 67.554754] usb-storage: waiting for device to settle before scanning

[ 67.554783] scsi5 : SCSI emulation for USB Mass Storage devices

[ 67.554826] usb-storage: device found at 3

[ 67.554827] usb-storage: waiting for device to settle before scanning

[ 67.555097] usbcore: registered new interface driver usb-storage

[ 67.555100] USB Mass Storage support registered.

[ 67.850408] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015a8ca8]

[ 72.546699] usb-storage: device scan complete

[ 72.546771] usb-storage: device scan complete

[ 72.550159] scsi 4:0:0:0: Direct-Access ST350063 0AS PQ: 0 ANSI: 2

[ 72.553189] scsi 5:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS

[ 72.559684] scsi 5:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS

[ 72.566292] scsi 5:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS

[ 72.572908] scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS

[ 72.574331] sd 5:0:0:0: [sdb] Attached SCSI removable disk

[ 72.574358] sd 5:0:0:0: Attached scsi generic sg3 type 0

[ 72.575428] sd 5:0:0:1: [sdc] Attached SCSI removable disk

[ 72.575452] sd 5:0:0:1: Attached scsi generic sg4 type 0

[ 72.576543] sd 5:0:0:2: [sdd] Attached SCSI removable disk

[ 72.576575] sd 5:0:0:2: Attached scsi generic sg5 type 0

[ 72.577664] sd 5:0:0:3: [sde] Attached SCSI removable disk

[ 72.577700] sd 5:0:0:3: Attached scsi generic sg6 type 0

[ 72.578953] sd 4:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)

[ 72.581208] sd 4:0:0:0: [sdf] Write Protect is off

[ 72.581210] sd 4:0:0:0: [sdf] Mode Sense: 38 00 00 00

[ 72.581212] sd 4:0:0:0: [sdf] Assuming drive cache: write through

[ 72.582324] sd 4:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)

[ 72.584570] sd 4:0:0:0: [sdf] Write Protect is off

[ 72.584573] sd 4:0:0:0: [sdf] Mode Sense: 38 00 00 00

[ 72.584575] sd 4:0:0:0: [sdf] Assuming drive cache: write through

[ 72.584578] sdf:<6>input: PC Speaker as /devices/platform/pcspkr/input/input1

[ 73.722616] Linux agpgart interface v0.102

[ 73.820166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 73.829468] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0

[ 73.829509] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 21

[ 73.829518] PCI: Setting latency timer of device 0000:00:19.0 to 64

[ 73.833227] iTCO_vendor_support: vendor-support=0

[ 73.836587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[ 73.836645] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)

[ 73.836680] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 73.907660] input: Power Button (FF) as /devices/virtual/input/input2

[ 73.946349] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:fc:b5:2e:ae

[ 73.946352] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection

[ 73.946379] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff

[ 73.946419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 73.964084] ACPI: Power Button (FF) [PWRF]

[ 73.964152] input: Power Button (CM) as /devices/virtual/input/input3

[ 74.018679] Linux video capture interface: v2.00

[ 74.032038] ACPI: Power Button (CM) [PWRB]

[ 74.310736] usbcore: registered new interface driver hiddev

[ 74.324969] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input4

[ 74.386382] input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-1

[ 74.418925] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input5

[ 74.419138] saa7130/34: v4l2 driver version 0.2.14 loaded

[ 74.419187] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 22

[ 74.419193] saa7133[0]: found at 0000:01:00.0, rev: 209, irq: 22, latency: 64, mmio: 0xf9ffe800

[ 74.419198] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected]

[ 74.419206] saa7133[0]: board init: gpio is 0

[ 74.502387] input,hiddev96,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-1

[ 74.502402] usbcore: registered new interface driver usbhid

[ 74.502405] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[ 74.555516] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92

[ 74.555525] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff

[ 74.555532] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff

[ 74.555539] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[ 74.555546] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff

[ 74.555553] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[ 74.555560] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[ 74.555566] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[ 74.631469] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23

[ 74.631486] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[ 74.654386] tuner 0-004b: chip found @ 0x96 (saa7133[0])

[ 74.665474] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

[ 74.702312] tda8290 0-004b: setting tuner address to 61

[ 74.786594] phy0: Selected rate control algorithm 'simple'

[ 74.810110] tuner 0-004b: type set to tda8290+75a

[ 74.857520] tda8290 0-004b: setting tuner address to 61

[ 74.872334] usbcore: registered new interface driver rt73usb

[ 74.961316] tuner 0-004b: type set to tda8290+75a

[ 74.964251] saa7133[0]: registered device video0 [v4l2]

[ 74.964269] saa7133[0]: registered device vbi0

[ 75.050881] saa7134 ALSA driver for DMA sound loaded

[ 75.050900] saa7133[0]/alsa: saa7133[0] at 0xf9ffe800 irq 22 registered as card -2

[ 75.125093] DVB: registering new adapter (saa7133[0])

[ 75.125096] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

[ 75.196903] tda1004x: setting up plls for 48MHz sampling clock

[ 75.480407] tda1004x: found firmware revision 29 -- ok

[ 79.304066] sdf1 < sdf5 >

[ 79.310901] sd 4:0:0:0: [sdf] Attached SCSI disk

[ 79.310949] sd 4:0:0:0: Attached scsi generic sg7 type 0

[ 79.647154] lp: driver loaded but no devices found

[ 79.731590] Adding 5156856k swap on /dev/sda4. Priority:-1 extents:1 across:5156856k

[ 80.270874] EXT3 FS on sda3, internal journal

[ 82.331953] No dock devices found.

[ 83.265642] ppdev: user-space parallel port driver

[ 83.382761] audit(1211910334.837:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5622 profile="/usr/sbin/cupsd" namespace="default"

[ 83.449388] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

[ 83.449393] apm: disabled - APM is not SMP safe.

[ 91.537813] Bluetooth: Core ver 2.11

[ 91.538027] NET: Registered protocol family 31

[ 91.538031] Bluetooth: HCI device and connection manager initialized

[ 91.538034] Bluetooth: HCI socket layer initialized

[ 91.551610] Bluetooth: L2CAP ver 2.9

[ 91.551615] Bluetooth: L2CAP socket layer initialized

[ 91.591353] Bluetooth: RFCOMM socket layer initialized

[ 91.591365] Bluetooth: RFCOMM TTY layer initialized

[ 91.591366] Bluetooth: RFCOMM ver 1.8

[ 103.760675] NET: Registered protocol family 10

[ 103.760864] lo: Disabled Privacy Extensions

[ 103.761233] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 103.761570] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 110.086479] NET: Registered protocol family 17

[ 111.263686] wlan0: Initial auth_alg=0

[ 111.263692] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[ 111.265208] wlan0: RX authentication from 00:0f:cc:b2:13:68 (alg=0 transaction=2 status=0)

[ 111.265213] wlan0: authenticated

[ 111.265217] wlan0: associate with AP 00:0f:cc:b2:13:68

[ 111.268195] wlan0: RX AssocResp from 00:0f:cc:b2:13:68 (capab=0x451 status=0 aid=1)

[ 111.268199] wlan0: associated

[ 111.269690] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 111.945404] padlock: VIA PadLock not detected.

[ 131.526268] wlan0: no IPv6 routers present

[10181.450793] wlan0: No ProbeResp from current AP 00:0f:cc:b2:13:68 - assume out of range

[10182.446155] wlan0: Initial auth_alg=0

[10182.446162] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[10182.459006] wlan0: Initial auth_alg=0

[10182.459012] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[10182.466759] wlan0: RX authentication from 00:0f:cc:b2:13:68 (alg=0 transaction=2 status=0)

[10182.466764] wlan0: authenticated

[10182.466768] wlan0: associate with AP 00:0f:cc:b2:13:68

[10182.467373] wlan0: authentication frame received from 00:0f:cc:b2:13:68, but not in authenticate state - ignored

[10182.470748] wlan0: RX ReassocResp from 00:0f:cc:b2:13:68 (capab=0x451 status=0 aid=1)

[10182.470773] wlan0: associated

thomas@thomas-desktop:~$

Dear Andrew

In any case I executed the three commands you provided (with running WLAN):

thomas@thomas-desktop:~$ lsusb
Bus 008 Device 001: ID 0000:0000 
Bus 007 Device 001: ID 0000:0000 
Bus 006 Device 001: ID 0000:0000 
Bus 005 Device 001: ID 0000:0000 
Bus 004 Device 004: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. 
Bus 004 Device 002: ID 15a9:0004 
Bus 004 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 03f0:070c Hewlett-Packard 
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 002: ID 03f0:0f0c Hewlett-Packard 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
thomas@thomas-desktop:~$

[   61.025446]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

[   61.025447]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)

[   61.025448]       .data : 0xc0320134 - 0xc041bdc4   (1007 kB)

[   61.025449]       .text : 0xc0100000 - 0xc0320134   (2176 kB)

[   61.025451] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[   61.025485] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1

[   61.025595] hpet clockevent registered

[   61.105461] Calibrating delay using timer specific routine.. 4791.96 BogoMIPS (lpj=9583936)

[   61.105478] Security Framework initialized

[   61.105483] SELinux:  Disabled at boot.

[   61.105494] AppArmor: AppArmor initialized

[   61.105497] Failure registering capabilities with primary security module.

[   61.105503] Mount-cache hash table entries: 512

[   61.105606] Initializing cgroup subsys ns

[   61.105610] Initializing cgroup subsys cpuacct

[   61.105619] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[   61.105624] monitor/mwait feature present.

[   61.105625] using mwait in idle threads.

[   61.105628] CPU: L1 I cache: 32K, L1 D cache: 32K

[   61.105630] CPU: L2 cache: 4096K

[   61.105632] CPU: Physical Processor ID: 0

[   61.105633] CPU: Processor Core ID: 0

[   61.105635] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[   61.105642] Compat vDSO mapped to ffffe000.

[   61.105653] Checking 'hlt' instruction... OK.

[   61.121817] SMP alternatives: switching to UP code

[   61.123103] Early unpacking initramfs... done

[   61.361054] ACPI: Core revision 20070126

[   61.361086] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[   61.466174] CPU0: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07

[   61.466186] SMP alternatives: switching to SMP code

[   61.466753] Booting processor 1/1 eip 3000

[   61.477079] Initializing CPU#1

[   61.556671] Calibrating delay using timer specific routine.. 4787.91 BogoMIPS (lpj=9575827)

[   61.556676] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[   61.556680] monitor/mwait feature present.

[   61.556682] CPU: L1 I cache: 32K, L1 D cache: 32K

[   61.556683] CPU: L2 cache: 4096K

[   61.556685] CPU: Physical Processor ID: 0

[   61.556686] CPU: Processor Core ID: 1

[   61.556687] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[   61.557317] CPU1: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07

[   61.557339] SMP alternatives: switching to SMP code

[   61.557952] Booting processor 2/2 eip 3000

[   61.568207] Initializing CPU#2

[   61.648511] Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=9575999)

[   61.648516] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[   61.648520] monitor/mwait feature present.

[   61.648523] CPU: L1 I cache: 32K, L1 D cache: 32K

[   61.648524] CPU: L2 cache: 4096K

[   61.648525] CPU: Physical Processor ID: 0

[   61.648526] CPU: Processor Core ID: 2

[   61.648527] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[   61.649091] CPU2: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07

[   61.649101] SMP alternatives: switching to SMP code

[   61.649486] Booting processor 3/3 eip 3000

[   61.659740] Initializing CPU#3

[   61.736358] Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=9575981)

[   61.736363] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000

[   61.736367] monitor/mwait feature present.

[   61.736369] CPU: L1 I cache: 32K, L1 D cache: 32K

[   61.736371] CPU: L2 cache: 4096K

[   61.736372] CPU: Physical Processor ID: 0

[   61.736373] CPU: Processor Core ID: 3

[   61.736374] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000

[   61.736977] CPU3: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07

[   61.736992] Total of 4 processors activated (19155.87 BogoMIPS).

[   61.737172] ENABLING IO-APIC IRQs

[   61.737339] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[   61.884175] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

[   61.904178] checking TSC synchronization [CPU#0 -> CPU#2]: passed.

[   61.924188] checking TSC synchronization [CPU#0 -> CPU#3]: passed.

[   61.944169] Brought up 4 CPUs

[   61.944212] CPU0 attaching sched-domain:

[   61.944214]  domain 0: span 03

[   61.944215]   groups: 01 02

[   61.944218]   domain 1: span 0f

[   61.944219]    groups: 03 0c

[   61.944221] CPU1 attaching sched-domain:

[   61.944222]  domain 0: span 03

[   61.944223]   groups: 02 01

[   61.944228]   domain 1: span 0f

[   61.944229]    groups: 03 0c

[   61.944231] CPU2 attaching sched-domain:

[   61.944232]  domain 0: span 0c

[   61.944234]   groups: 04 08

[   61.944235]   domain 1: span 0f

[   61.944237]    groups: 0c 03

[   61.944239] CPU3 attaching sched-domain:

[   61.944240]  domain 0: span 0c

[   61.944241]   groups: 08 04

[   61.944243]   domain 1: span 0f

[   61.944244]    groups: 0c 03

[   61.944533] net_namespace: 64 bytes

[   61.944539] Booting paravirtualized kernel on bare hardware

[   61.944867] Time: 19:45:14  Date: 05/27/08

[   61.944887] NET: Registered protocol family 16

[   61.945034] EISA bus registered

[   61.945038] ACPI: bus type pci registered

[   61.945219] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2

[   61.945220] PCI: Using configuration type 1

[   61.945222] Setting up standard PCI resources

[   61.948130] ACPI: EC: Look up EC in DSDT

[   61.950725] ACPI: Interpreter enabled

[   61.950727] ACPI: (supports S0 S1 S3 S4 S5)

[   61.950746] ACPI: Using IOAPIC for interrupt routing

[   61.955298] ACPI: PCI Root Bridge [PCI0] (0000:00)

[   61.956088] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[   61.956092] PCI quirk: region 0480-04bf claimed by ICH6 GPIO

[   61.956575] PCI: Transparent bridge - 0000:00:1e.0

[   61.956597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[   61.956700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[   61.966150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[   61.966234] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[   61.966316] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[   61.966399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[   61.966482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[   61.966565] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)

[   61.966649] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)

[   61.966731] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)

[   61.966830] Linux Plug and Play Support v0.97 (c) Adam Belay

[   61.966853] pnp: PnP ACPI init

[   61.966858] ACPI: bus type pnp registered

[   61.968490] pnp: PnP ACPI: found 14 devices

[   61.968492] ACPI: ACPI bus type pnp unregistered

[   61.968495] PnPBIOS: Disabled by ACPI PNP

[   61.968687] PCI: Using ACPI for IRQ routing

[   61.968688] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[   61.996008] NET: Registered protocol family 8

[   61.996010] NET: Registered protocol family 20

[   61.996047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[   61.996052] hpet0: 4 64-bit timers, 14318180 Hz

[   61.997077] AppArmor: AppArmor Filesystem Enabled

[   62.000015] Time: tsc clocksource has been installed.

[   62.000022] Switched to high resolution mode on CPU 0

[   62.000094] Switched to high resolution mode on CPU 1

[   62.000605] Switched to high resolution mode on CPU 2

[   62.000646] Switched to high resolution mode on CPU 3

[   62.012031] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

[   62.012040] system 00:06: ioport range 0x4d0-0x4d1 has been reserved

[   62.012043] system 00:06: ioport range 0x800-0x87f has been reserved

[   62.012046] system 00:06: ioport range 0x480-0x4bf has been reserved

[   62.012049] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved

[   62.012052] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved

[   62.012058] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved

[   62.012061] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved

[   62.012067] system 00:09: ioport range 0xa00-0xadf has been reserved

[   62.012074] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved

[   62.012080] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved

[   62.012086] system 00:0d: iomem range 0x0-0x9ffff could not be reserved

[   62.012089] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved

[   62.012092] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved

[   62.012095] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved

[   62.012098] system 00:0d: iomem range 0x0-0x0 could not be reserved

[   62.042419] PCI: Bridge: 0000:00:01.0

[   62.042421]   IO window: e000-efff

[   62.042423]   MEM window: fa000000-febfffff

[   62.042426]   PREFETCH window: d0000000-dfffffff

[   62.042428] PCI: Bridge: 0000:00:1e.0

[   62.042429]   IO window: disabled.

[   62.042434]   MEM window: f9f00000-f9ffffff

[   62.042437]   PREFETCH window: disabled.

[   62.042449] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[   62.042453] PCI: Setting latency timer of device 0000:00:01.0 to 64

[   62.042463] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[   62.042471] NET: Registered protocol family 2

[   62.079912] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[   62.080125] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[   62.080458] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[   62.080627] TCP: Hash tables configured (established 131072 bind 65536)

[   62.080628] TCP reno registered

[   62.091967] checking if image is initramfs... it is

[   62.560738] Freeing initrd memory: 7283k freed

[   62.562012] audit: initializing netlink socket (disabled)

[   62.562025] audit(1211917513.280:1): initialized

[   62.562309] highmem bounce pool size: 64 pages

[   62.564840] VFS: Disk quotas dquot_6.5.1

[   62.564920] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[   62.565080] io scheduler noop registered

[   62.565082] io scheduler anticipatory registered

[   62.565083] io scheduler deadline registered

[   62.565090] io scheduler cfq registered (default)

[   62.565221] Boot video device is 0000:02:00.0

[   62.565358] PCI: Setting latency timer of device 0000:00:01.0 to 64

[   62.565384] assign_interrupt_mode Found MSI capability

[   62.565406] Allocate Port Service[0000:00:01.0:pcie00]

[   62.565704] isapnp: Scanning for PnP cards...

[   62.918203] isapnp: No Plug & Play device found

[   62.951280] Real Time Clock Driver v1.12ac

[   62.951455] hpet_resources: 0xfed00000 is busy

[   62.951521] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[   62.952999] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[   62.953084] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[   62.953262] PNP: No PS/2 controller found. Probing ports directly.

[   62.955402] serio: i8042 KBD port at 0x60,0x64 irq 1

[   62.955406] serio: i8042 AUX port at 0x60,0x64 irq 12

[   62.971421] mice: PS/2 mouse device common for all mice

[   62.971555] EISA: Probing bus 0 at eisa.0

[   62.971592] EISA: Detected 0 cards.

[   62.971594] cpuidle: using governor ladder

[   62.971595] cpuidle: using governor menu

[   62.971651] NET: Registered protocol family 1

[   62.971670] Using IPI No-Shortcut mode

[   62.971690] registered taskstats version 1

[   62.971770]   Magic number: 8:275:800

[   62.971784]   hash matches device ptyr8

[   62.971794] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[   62.971795] EDD information not available.

[   62.971886] Freeing unused kernel memory: 368k freed

[   64.138483] fuse init (API version 7.9)

[   64.240804] usbcore: registered new interface driver usbfs

[   64.240820] usbcore: registered new interface driver hub

[   64.240838] usbcore: registered new device driver usb

[   64.241629] USB Universal Host Controller Interface driver v3.0

[   64.241668] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16

[   64.241675] PCI: Setting latency timer of device 0000:00:1a.0 to 64

[   64.241679] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[   64.241853] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[   64.241877] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c080

[   64.241967] usb usb1: configuration #1 chosen from 1 choice

[   64.241984] hub 1-0:1.0: USB hub found

[   64.241987] hub 1-0:1.0: 2 ports detected

[   64.325936] SCSI subsystem initialized

[   64.331219] libata version 3.00 loaded.

[   64.347974] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17

[   64.347983] PCI: Setting latency timer of device 0000:00:1a.1 to 64

[   64.347986] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[   64.348003] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[   64.348028] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000c400

[   64.348110] usb usb2: configuration #1 chosen from 1 choice

[   64.348127] hub 2-0:1.0: USB hub found

[   64.348131] hub 2-0:1.0: 2 ports detected

[   64.447904] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18

[   64.447916] PCI: Setting latency timer of device 0000:00:1a.7 to 64

[   64.447919] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[   64.447944] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3

[   64.451841] ehci_hcd 0000:00:1a.7: debug port 1

[   64.451846] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

[   64.451853] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9eff400

[   64.467684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   64.467785] usb usb3: configuration #1 chosen from 1 choice

[   64.467803] hub 3-0:1.0: USB hub found

[   64.467807] hub 3-0:1.0: 4 ports detected

[   64.573117] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19

[   64.573136] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[   64.573139] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[   64.573156] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4

[   64.577049] ehci_hcd 0000:00:1d.7: debug port 1

[   64.577054] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[   64.577064] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9eff800

[   64.593003] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   64.593076] usb usb4: configuration #1 chosen from 1 choice

[   64.593093] hub 4-0:1.0: USB hub found

[   64.593096] hub 4-0:1.0: 8 ports detected

[   64.695387] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19

[   64.695398] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[   64.695403] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[   64.695434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[   64.695459] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c480

[   64.695595] usb usb5: configuration #1 chosen from 1 choice

[   64.695613] hub 5-0:1.0: USB hub found

[   64.695617] hub 5-0:1.0: 2 ports detected

[   64.799197] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20

[   64.799205] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[   64.799209] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[   64.799231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[   64.799257] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c800

[   64.799393] usb usb6: configuration #1 chosen from 1 choice

[   64.799410] hub 6-0:1.0: USB hub found

[   64.799413] hub 6-0:1.0: 2 ports detected

[   64.903017] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[   64.903025] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[   64.903029] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[   64.903051] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7

[   64.903073] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880

[   64.903197] usb usb7: configuration #1 chosen from 1 choice

[   64.903220] hub 7-0:1.0: USB hub found

[   64.903223] hub 7-0:1.0: 2 ports detected

[   64.970848] usb 3-1: new high speed USB device using ehci_hcd and address 2

[   65.006836] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16

[   65.006844] PCI: Setting latency timer of device 0000:00:1d.3 to 64

[   65.006847] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[   65.006869] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8

[   65.006892] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00

[   65.007015] usb usb8: configuration #1 chosen from 1 choice

[   65.007038] hub 8-0:1.0: USB hub found

[   65.007041] hub 8-0:1.0: 2 ports detected

[   65.110675] ata_piix 0000:00:1f.2: version 2.12

[   65.110681] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[   65.110708] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20

[   65.110737] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[   65.110824] scsi0 : ata_piix

[   65.110892] scsi1 : ata_piix

[   65.110972] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[   65.110976] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN0._GTM] (Node f7c4c3a8), AE_NOT_FOUND

[   65.111026] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[   65.111029] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN1._GTM] (Node f7c4c498), AE_NOT_FOUND

[   65.111057] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14

[   65.111059] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15

[   65.118339] usb 3-1: configuration #1 chosen from 1 choice

[   65.274575] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7

[   65.274579] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[   65.282534] ata1.00: configured for UDMA/133

[   65.543386] usb 4-4: new high speed USB device using ehci_hcd and address 2

[   65.781665] ata2.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33

[   65.781685] ata2.01: ATAPI: ASUS    DVD-E616A3T, CP07, max UDMA/33

[   65.781687] ata2.01: applying bridge limits

[   65.838895] usb 4-4: configuration #1 chosen from 1 choice

[   65.954889] ata2.00: configured for UDMA/33

[   66.076891] usb 4-5: new high speed USB device using ehci_hcd and address 3

[   66.158530] ata2.01: configured for UDMA/33

[   66.158647] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5

[   66.160599] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-H30L  S755 PQ: 0 ANSI: 5

[   66.183233] scsi 1:0:1:0: CD-ROM            ASUS     DVD-E616A3T      CP07 PQ: 0 ANSI: 5

[   66.183299] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[   66.183327] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 20

[   66.183356] PCI: Setting latency timer of device 0000:00:1f.5 to 64

[   66.183398] scsi2 : ata_piix

[   66.183464] scsi3 : ata_piix

[   66.183526] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[   66.183530] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN0._GTM] (Node f7c4cae0), AE_NOT_FOUND

[   66.183573] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND

[   66.183576] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN1._GTM] (Node f7c4cbd0), AE_NOT_FOUND

[   66.183600] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20

[   66.183601] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20

[   66.226344] usb 4-5: configuration #1 chosen from 1 choice

[   66.464731] usb 4-7: new high speed USB device using ehci_hcd and address 4

[   66.510988] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 21

[   66.562656] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21]  MMIO=[f9fff000-f9fff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]

[   66.602178] Driver 'sr' needs updating - please use bus_type methods

[   66.603996] Driver 'sd' needs updating - please use bus_type methods

[   66.605002] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)

[   66.605012] sd 0:0:0:0: [sda] Write Protect is off

[   66.605014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   66.605026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   66.605065] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)

[   66.605073] sd 0:0:0:0: [sda] Write Protect is off

[   66.605074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   66.605086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   66.605089]  sda:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray

[   66.612307] Uniform CD-ROM driver Revision: 3.20

[   66.612340] sr 1:0:0:0: Attached scsi CD-ROM sr0

[   66.617682] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray

[   66.617739] sr 1:0:1:0: Attached scsi CD-ROM sr1

[   66.621238] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   66.621253] sr 1:0:0:0: Attached scsi generic sg1 type 5

[   66.621267] sr 1:0:1:0: Attached scsi generic sg2 type 5

[   66.645379] usb 4-7: configuration #1 chosen from 1 choice

[   66.645554] hub 4-7:1.0: USB hub found

[   66.645658] hub 4-7:1.0: 4 ports detected

[   66.646921]  sda1 sda2 sda3 sda4

[   66.672284] sd 0:0:0:0: [sda] Attached SCSI disk

[   66.997815] Attempting manual resume

[   66.997818] swsusp: Resume From Partition 8:4

[   66.997819] PM: Checking swsusp image.

[   66.997968] PM: Resume from disk failed.

[   67.029273] kjournald starting.  Commit interval 5 seconds

[   67.029288] EXT3-fs: mounted filesystem with ordered data mode.

[   67.132146] usbcore: registered new interface driver libusual

[   67.371642] usb 2-1: new low speed USB device using uhci_hcd and address 2

[   67.438364] Initializing USB Mass Storage driver...

[   67.551597] usb 2-1: configuration #1 chosen from 1 choice

[   67.554682] scsi4 : SCSI emulation for USB Mass Storage devices

[   67.554753] usb-storage: device found at 2

[   67.554754] usb-storage: waiting for device to settle before scanning

[   67.554783] scsi5 : SCSI emulation for USB Mass Storage devices

[   67.554826] usb-storage: device found at 3

[   67.554827] usb-storage: waiting for device to settle before scanning

[   67.555097] usbcore: registered new interface driver usb-storage

[   67.555100] USB Mass Storage support registered.

[   67.850408] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800015a8ca8]

[   72.546699] usb-storage: device scan complete

[   72.546771] usb-storage: device scan complete

[   72.550159] scsi 4:0:0:0: Direct-Access     ST350063 0AS                   PQ: 0 ANSI: 2

[   72.553189] scsi 5:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS

[   72.559684] scsi 5:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS

[   72.566292] scsi 5:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS

[   72.572908] scsi 5:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS

[   72.574331] sd 5:0:0:0: [sdb] Attached SCSI removable disk

[   72.574358] sd 5:0:0:0: Attached scsi generic sg3 type 0

[   72.575428] sd 5:0:0:1: [sdc] Attached SCSI removable disk

[   72.575452] sd 5:0:0:1: Attached scsi generic sg4 type 0

[   72.576543] sd 5:0:0:2: [sdd] Attached SCSI removable disk

[   72.576575] sd 5:0:0:2: Attached scsi generic sg5 type 0

[   72.577664] sd 5:0:0:3: [sde] Attached SCSI removable disk

[   72.577700] sd 5:0:0:3: Attached scsi generic sg6 type 0

[   72.578953] sd 4:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)

[   72.581208] sd 4:0:0:0: [sdf] Write Protect is off

[   72.581210] sd 4:0:0:0: [sdf] Mode Sense: 38 00 00 00

[   72.581212] sd 4:0:0:0: [sdf] Assuming drive cache: write through

[   72.582324] sd 4:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)

[   72.584570] sd 4:0:0:0: [sdf] Write Protect is off

[   72.584573] sd 4:0:0:0: [sdf] Mode Sense: 38 00 00 00

[   72.584575] sd 4:0:0:0: [sdf] Assuming drive cache: write through

[   72.584578]  sdf:<6>input: PC Speaker as /devices/platform/pcspkr/input/input1

[   73.722616] Linux agpgart interface v0.102

[   73.820166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[   73.829468] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0

[   73.829509] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 21

[   73.829518] PCI: Setting latency timer of device 0000:00:19.0 to 64

[   73.833227] iTCO_vendor_support: vendor-support=0

[   73.836587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[   73.836645] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)

[   73.836680] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   73.907660] input: Power Button (FF) as /devices/virtual/input/input2

[   73.946349] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:fc:b5:2e:ae

[   73.946352] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection

[   73.946379] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff

[   73.946419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   73.964084] ACPI: Power Button (FF) [PWRF]

[   73.964152] input: Power Button (CM) as /devices/virtual/input/input3

[   74.018679] Linux video capture interface: v2.00

[   74.032038] ACPI: Power Button (CM) [PWRB]

[   74.310736] usbcore: registered new interface driver hiddev

[   74.324969] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input4

[   74.386382] input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-1

[   74.418925] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input5

[   74.419138] saa7130/34: v4l2 driver version 0.2.14 loaded

[   74.419187] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 22

[   74.419193] saa7133[0]: found at 0000:01:00.0, rev: 209, irq: 22, latency: 64, mmio: 0xf9ffe800

[   74.419198] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected]

[   74.419206] saa7133[0]: board init: gpio is 0

[   74.502387] input,hiddev96,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-1

[   74.502402] usbcore: registered new interface driver usbhid

[   74.502405] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[   74.555516] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92

[   74.555525] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff

[   74.555532] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff

[   74.555539] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[   74.555546] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff

[   74.555553] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[   74.555560] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[   74.555566] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[   74.631469] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23

[   74.631486] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[   74.654386] tuner 0-004b: chip found @ 0x96 (saa7133[0])

[   74.665474] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

[   74.702312] tda8290 0-004b: setting tuner address to 61

[   74.786594] phy0: Selected rate control algorithm 'simple'

[   74.810110] tuner 0-004b: type set to tda8290+75a

[   74.857520] tda8290 0-004b: setting tuner address to 61

[   74.872334] usbcore: registered new interface driver rt73usb

[   74.961316] tuner 0-004b: type set to tda8290+75a

[   74.964251] saa7133[0]: registered device video0 [v4l2]

[   74.964269] saa7133[0]: registered device vbi0

[   75.050881] saa7134 ALSA driver for DMA sound loaded

[   75.050900] saa7133[0]/alsa: saa7133[0] at 0xf9ffe800 irq 22 registered as card -2

[   75.125093] DVB: registering new adapter (saa7133[0])

[   75.125096] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

[   75.196903] tda1004x: setting up plls for 48MHz sampling clock

[   75.480407] tda1004x: found firmware revision 29 -- ok

[   79.304066]  sdf1 < sdf5 >

[   79.310901] sd 4:0:0:0: [sdf] Attached SCSI disk

[   79.310949] sd 4:0:0:0: Attached scsi generic sg7 type 0

[   79.647154] lp: driver loaded but no devices found

[   79.731590] Adding 5156856k swap on /dev/sda4.  Priority:-1 extents:1 across:5156856k

[   80.270874] EXT3 FS on sda3, internal journal

[   82.331953] No dock devices found.

[   83.265642] ppdev: user-space parallel port driver

[   83.382761] audit(1211910334.837:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5622 profile="/usr/sbin/cupsd" namespace="default"

[   83.449388] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

[   83.449393] apm: disabled - APM is not SMP safe.

[   91.537813] Bluetooth: Core ver 2.11

[   91.538027] NET: Registered protocol family 31

[   91.538031] Bluetooth: HCI device and connection manager initialized

[   91.538034] Bluetooth: HCI socket layer initialized

[   91.551610] Bluetooth: L2CAP ver 2.9

[   91.551615] Bluetooth: L2CAP socket layer initialized

[   91.591353] Bluetooth: RFCOMM socket layer initialized

[   91.591365] Bluetooth: RFCOMM TTY layer initialized

[   91.591366] Bluetooth: RFCOMM ver 1.8

[  103.760675] NET: Registered protocol family 10

[  103.760864] lo: Disabled Privacy Extensions

[  103.761233] ADDRCONF(NETDEV_UP): eth0: link is not ready

[  103.761570] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[  110.086479] NET: Registered protocol family 17

[  111.263686] wlan0: Initial auth_alg=0

[  111.263692] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[  111.265208] wlan0: RX authentication from 00:0f:cc:b2:13:68 (alg=0 transaction=2 status=0)

[  111.265213] wlan0: authenticated

[  111.265217] wlan0: associate with AP 00:0f:cc:b2:13:68

[  111.268195] wlan0: RX AssocResp from 00:0f:cc:b2:13:68 (capab=0x451 status=0 aid=1)

[  111.268199] wlan0: associated

[  111.269690] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[  111.945404] padlock: VIA PadLock not detected.

[  131.526268] wlan0: no IPv6 routers present

[10181.450793] wlan0: No ProbeResp from current AP 00:0f:cc:b2:13:68 - assume out of range

[10182.446155] wlan0: Initial auth_alg=0

[10182.446162] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[10182.459006] wlan0: Initial auth_alg=0

[10182.459012] wlan0: authenticate with AP 00:0f:cc:b2:13:68

[10182.466759] wlan0: RX authentication from 00:0f:cc:b2:13:68 (alg=0 transaction=2 status=0)

[10182.466764] wlan0: authenticated

[10182.466768] wlan0: associate with AP 00:0f:cc:b2:13:68

[10182.467373] wlan0: authentication frame received from 00:0f:cc:b2:13:68, but not in authenticate state - ignored

[10182.470748] wlan0: RX ReassocResp from 00:0f:cc:b2:13:68 (capab=0x451 status=0 aid=1)

[10182.470773] wlan0: associated

thomas@thomas-desktop:~$

Revision history for this message

Andrew Gee (andrewgee) said on 2008-05-28:

Yeah. I hate it when that happens too. Well, if you get the problem again, take a dmesg output from the terminal and put it up here again. The dmesg after the error occurs should help in finding the issue.

One thing I did notice from your dmesg output is that you lost you wireless connection for a short time around 2 and a half hours from when you turned on your computer. This could be that the wireless adapter just lost it's signal. It picked the wireless network back up, within a few seconds, however.

Must say you've got a good computer there! Quad core 2.4GHz! I should be getting around to upgrading :-)

Revision history for this message

thomas.grond (thomas-grond) said on 2008-05-29:

Thanks a lot for your help, Andrew. Doing Videostuff on a Windows based system needs a lot of power :-) Therefore it seemed sensible to me to get a computer with some juice.

To post a message you must log in.

Ask a question

Edit question

Ubuntu

Ubuntu 8.04 Loss of WLAN-connection after some minutes

Question information

Related bugs

Related FAQ:

Subscribers