USB devices (memory stick etc) not recognised

Asked by John East on 2007-01-31

Hi.
 I have a problem with a USB memory stick (Disgo) not being recognised by UBUNTU. I have checked that all the appropriate boxes are ticked under system>preferences>removable drives and media. Typing dmesg at the terminal (as advised in a web help page I visited) after plugging it in resulted in these messages.

[17180182.548000] handlers:
[17180182.548000] [<de8ca730>] (usb_hcd_irq+0x0/0x60 [usbcore])
[17180182.548000] [<de9c76f0>] (rhine_interrupt+0x0/0x240 [via_rhine])
[17180182.548000] Disabling IRQ #5
[17180182.692000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
john@john-desktop:~$

I have tried a live CD (Slax) in order to try to establish if it was a general Linux problem, this distro found and recognised my USB stick. It even let me copy from it to the filesystem on the hd.

I tried the memory stick on another PC using the live CD for Ubuntu and it recognised it. In addition, my Laser printer (Brother HL 1430) seems to work on USB port on the machine the USB stick doesn't work on, but does strange things. For example, It didn't print this document, but when I restarted the machine, then it printed.

I did dmesg again after the printer was added and got different messages, the full list follows.

john@john-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[17179569.184000] BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 479MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fb830
[17179569.184000] On node 0 totalpages: 122864
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 118768 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI ) @ 0x000f9fb0
[17179569.184000] ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x1dff0000
[17179569.184000] ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x1dff0030
[17179569.184000] ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] Intel MultiProcessor Specification v1.1
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: VIA Product ID: 5400A APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] I/O APIC #2 Version 3 at 0xFEC00000.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 2000.138 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.828000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.828000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[17179572.852000] Memory: 476724k/491456k available (1976k kernel code, 14164k reserved, 606k data, 288k init, 0k highmem)
[17179572.852000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.936000] Calibrating delay using timer specific routine.. 4003.93 BogoMIPS (lpj=8007871)
[17179572.936000] Security Framework v1.0.0 initialized
[17179572.936000] SELinux: Disabled at boot.
[17179572.936000] Mount-cache hash table entries: 512
[17179572.936000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.936000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.936000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179572.936000] CPU: L2 cache: 128K
[17179572.936000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179572.936000] mtrr: v2.0 (20020519)
[17179572.936000] CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
[17179572.936000] Enabling fast FPU save and restore... done.
[17179572.936000] Enabling unmasked SIMD FPU exception support... done.
[17179572.936000] Checking 'hlt' instruction... OK.
[17179572.952000] checking if image is initramfs... it is
[17179573.744000] Freeing initrd memory: 6616k freed
[17179573.784000] ACPI: Looking for DSDT ... not found!
[17179573.788000] ACPI: setting ELCR to 0200 (from 0820)
[17179573.788000] ExtINT not setup in hardware but reported by MP table
[17179573.788000] ENABLING IO-APIC IRQs
[17179573.788000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[17179573.932000] NET: Registered protocol family 16
[17179573.932000] EISA bus registered
[17179573.932000] ACPI: bus type pci registered
[17179573.940000] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[17179573.940000] PCI: Using configuration type 1
[17179573.940000] ACPI: Subsystem revision 20051216
[17179573.948000] ACPI: Interpreter enabled
[17179573.948000] ACPI: Using PIC for interrupt routing
[17179573.948000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.948000] PCI: Probing PCI hardware (bus 00)
[17179573.952000] PCI quirk: region 0800-087f claimed by vt8235 PM
[17179573.952000] PCI quirk: region 0400-040f claimed by vt8235 SMB
[17179573.952000] Boot video device is 0000:01:00.0
[17179573.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.984000] ACPI: Power Resource [URP1] (off)
[17179573.984000] ACPI: Power Resource [URP2] (off)
[17179573.984000] ACPI: Power Resource [FDDP] (off)
[17179573.984000] ACPI: Power Resource [LPTP] (off)
[17179573.988000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179573.992000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179573.992000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179573.992000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179573.992000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.992000] pnp: PnP ACPI init
[17179574.000000] pnp: PnP ACPI: found 11 devices
[17179574.000000] PnPBIOS: Disabled by ACPI PNP
[17179574.000000] PCI: Using ACPI for IRQ routing
[17179574.000000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179574.004000] PCI: Bridge: 0000:00:01.0
[17179574.004000] IO window: disabled.
[17179574.004000] MEM window: dfd00000-dfefffff
[17179574.004000] PREFETCH window: cfb00000-dfbfffff
[17179574.004000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179574.004000] audit: initializing netlink socket (disabled)
[17179574.004000] audit(1170256913.004:1): initialized
[17179574.004000] VFS: Disk quotas dquot_6.5.1
[17179574.004000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.008000] Initializing Cryptographic API
[17179574.008000] io scheduler noop registered
[17179574.008000] io scheduler anticipatory registered
[17179574.008000] io scheduler deadline registered
[17179574.008000] io scheduler cfq registered
[17179574.008000] isapnp: Scanning for PnP cards...
[17179574.360000] isapnp: No Plug & Play device found
[17179574.468000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.468000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.472000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.472000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.472000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.484000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.488000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.488000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.488000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.488000] mice: PS/2 mouse device common for all mice
[17179574.488000] EISA: Probing bus 0 at eisa.0
[17179574.488000] EISA: Detected 0 cards.
[17179574.488000] NET: Registered protocol family 2
[17179574.508000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.528000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179574.528000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179574.528000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[17179574.528000] TCP: Hash tables configured (established 16384 bind 16384)
[17179574.528000] TCP reno registered
[17179574.528000] TCP bic registered
[17179574.528000] NET: Registered protocol family 1
[17179574.528000] NET: Registered protocol family 8
[17179574.528000] NET: Registered protocol family 20
[17179574.528000] Using IPI Shortcut mode
[17179574.528000] ACPI wakeup devices:
[17179574.528000] PCI0 UAR1 USB1 USB2 USB3 EHCI AC9 MC9 ILAN SLPB
[17179574.528000] ACPI: (supports S0 S1 S4 S5)
[17179574.528000] Freeing unused kernel memory: 288k freed
[17179574.652000] vga16fb: initializing
[17179574.652000] vga16fb: mapped to 0xc00a0000
[17179574.784000] Console: switching to colour frame buffer device 80x25
[17179574.784000] fb0: VGA16 VGA frame buffer device
[17179575.924000] Capability LSM initialized
[17179576.020000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179577.724000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179577.724000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179577.724000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179577.724000] VP_IDE: chipset revision 6
[17179577.724000] VP_IDE: not 100% native mode: will probe irqs later
[17179577.724000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179577.724000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179577.724000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179577.724000] Probing IDE interface ide0...
[17179578.140000] hda: SAMSUNG SV4012H, ATA DISK drive
[17179578.812000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.828000] Probing IDE interface ide1...
[17179579.692000] hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
[17179580.364000] ide1 at 0x170-0x177,0x376 on irq 15
[17179580.380000] hda: max request size: 128KiB
[17179580.400000] hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179580.400000] hda: cache flushes supported
[17179580.400000] hda: hda1 hda2 < hda5 >
[17179580.428000] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179580.428000] Uniform CD-ROM driver Revision: 3.20
[17179580.792000] usbcore: registered new driver usbfs
[17179580.792000] usbcore: registered new driver hub
[17179580.796000] USB Universal Host Controller Interface driver v2.3
[17179580.796000] **** SET: Misaligned resource pointer: ddc02402 Type 07 Len 0
[17179580.796000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[17179580.796000] PCI: setting IRQ 5 as level-triggered
[17179580.796000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179580.796000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179580.800000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179580.800000] uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e400
[17179580.800000] hub 1-0:1.0: USB hub found
[17179580.800000] hub 1-0:1.0: 2 ports detected
[17179580.904000] **** SET: Misaligned resource pointer: ddc02102 Type 07 Len 0
[17179580.904000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179580.904000] PCI: setting IRQ 11 as level-triggered
[17179580.904000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179580.904000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179580.904000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179580.904000] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
[17179580.904000] hub 2-0:1.0: USB hub found
[17179580.904000] hub 2-0:1.0: 2 ports detected
[17179581.008000] **** SET: Misaligned resource pointer: ddbe5cc2 Type 07 Len 0
[17179581.008000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179581.008000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179581.008000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179581.008000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179581.008000] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000ec00
[17179581.008000] hub 3-0:1.0: USB hub found
[17179581.008000] hub 3-0:1.0: 2 ports detected
[17179581.116000] **** SET: Misaligned resource pointer: ddbe59c2 Type 07 Len 0
[17179581.116000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179581.116000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179581.116000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179581.120000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179581.120000] ehci_hcd 0000:00:10.3: irq 11, io mem 0xdfffff00
[17179581.120000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179581.120000] hub 4-0:1.0: USB hub found
[17179581.120000] hub 4-0:1.0: 6 ports detected
[17179581.376000] Attempting manual resume
[17179581.448000] EXT3-fs: mounted filesystem with ordered data mode.
[17179581.464000] kjournald starting. Commit interval 5 seconds
[17179581.672000] hub 4-0:1.0: over-current change on port 2
[17179594.972000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179595.084000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179595.128000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.144000] agpgart: Detected VIA P4M266x/P4N266 chipset
[17179595.152000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179595.740000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179595.740000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179595.744000] eth0: VIA Rhine II at 0x1dc00, 00:0a:e6:d7:70:f7, IRQ 5.
[17179595.744000] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[17179595.760000] Real Time Clock Driver v1.12
[17179595.796000] parport: PnPBIOS parport detected.
[17179595.796000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179595.832000] irda_init()
[17179595.832000] NET: Registered protocol family 23
[17179595.896000] input: PC Speaker as /class/input/input1
[17179596.244000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179596.248000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179596.324000] Floppy drive(s): fd0 is 1.44M
[17179596.356000] FDC 0 is a post-1991 82077
[17179596.700000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179597.092000] ts: Compaq touchscreen protocol output
[17179597.544000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179598.276000] lp0: using parport0 (interrupt-driven).
[17179598.408000] Adding 1413680k swap on /dev/hda5. Priority:-1 extents:1 across:1413680k
[17179598.604000] NET: Registered protocol family 17
[17179598.624000] EXT3 FS on hda1, internal journal
[17179598.948000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179598.948000] md: bitmap version 4.39
[17179599.636000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[17179600.620000] cdrom: open failed.
[17179601.872000] NET: Registered protocol family 10
[17179601.872000] lo: Disabled Privacy Extensions
[17179601.872000] IPv6 over IPv4 tunneling driver
[17179609.520000] ACPI: Power Button (FF) [PWRF]
[17179609.520000] ACPI: Power Button (CM) [PWRB]
[17179609.520000] ACPI: Sleep Button (CM) [SLPB]
[17179609.716000] ibm_acpi: ec object not found
[17179609.768000] pcc_acpi: loading...
[17179612.764000] eth0: no IPv6 routers present
[17179621.256000] [drm] Initialized drm 1.0.1 20051102
[17179621.292000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179621.292000] [drm] Initialized savage 2.4.1 20050313 on minor 0
[17179621.296000] mtrr: base(0xd2000000) is not aligned on a size(0x5000000) boundary
[17179621.296000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179621.296000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[17179621.296000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[17179623.004000] ppdev: user-space parallel port driver
[17179623.488000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179623.488000] apm: overridden by ACPI.
[17179624.540000] Bluetooth: Core ver 2.8
[17179624.540000] NET: Registered protocol family 31
[17179624.540000] Bluetooth: HCI device and connection manager initialized
[17179624.540000] Bluetooth: HCI socket layer initialized
[17179624.580000] Bluetooth: L2CAP ver 2.8
[17179624.580000] Bluetooth: L2CAP socket layer initialized
[17179624.640000] Bluetooth: RFCOMM socket layer initialized
[17179624.640000] Bluetooth: RFCOMM TTY layer initialized
[17179624.640000] Bluetooth: RFCOMM ver 1.7
[17182644.708000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17182645.228000] irq 5: nobody cared (try booting with the "irqpoll" option)
[17182645.228000] [<c013ee82>] __report_bad_irq+0x22/0x80
[17182645.228000] [<c013ef78>] note_interrupt+0x68/0xc0
[17182645.228000] [<c013e83c>] __do_IRQ+0xbc/0xe0
[17182645.228000] [<c010596a>] do_IRQ+0x1a/0x30
[17182645.228000] [<c01040aa>] common_interrupt+0x1a/0x20
[17182645.228000] handlers:
[17182645.228000] [<de8ca730>] (usb_hcd_irq+0x0/0x60 [usbcore])
[17182645.228000] [<de9626f0>] (rhine_interrupt+0x0/0x240 [via_rhine])
[17182645.228000] Disabling IRQ #5
[17182645.980000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x001A
[17182645.980000] usbcore: registered new driver usblp
[17182645.980000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17183430.764000] usb 4-6: new high speed USB device using ehci_hcd and address 3
[17183431.764000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[17183442.308000] usb 4-6: device not accepting address 3, error -110
[17183442.608000] usb 4-6: new high speed USB device using ehci_hcd and address 5
[17183454.152000] usb 4-6: device not accepting address 5, error -110
[17183454.452000] usb 4-6: new high speed USB device using ehci_hcd and address 7
[17183465.996000] usb 4-6: device not accepting address 7, error -110
[17183466.296000] usb 4-6: new high speed USB device using ehci_hcd and address 9
[17183477.840000] usb 4-6: device not accepting address 9, error -110
[17183478.140000] usb 4-6: new high speed USB device using ehci_hcd and address 11
[17183489.684000] usb 4-6: device not accepting address 11, error -110
[17183489.984000] usb 4-6: new high speed USB device using ehci_hcd and address 13
[17183501.528000] usb 4-6: device not accepting address 13, error -110
[17183501.828000] usb 4-6: new high speed USB device using ehci_hcd and address 15
[17183513.372000] usb 4-6: device not accepting address 15, error -110
[17183513.428000] usb 1-1: USB disconnect, address 2
[17183513.428000] drivers/usb/class/usblp.c: usblp0: removed
[17183513.796000] usb 4-6: new high speed USB device using ehci_hcd and address 17
[17183525.340000] usb 4-6: device not accepting address 17, error -110
[17183525.768000] usb 4-6: new high speed USB device using ehci_hcd and address 19
[17183537.312000] usb 4-6: device not accepting address 19, error -110
[17183537.612000] usb 4-6: new high speed USB device using ehci_hcd and address 21
[17183549.156000] usb 4-6: device not accepting address 21, error -110
[17183549.456000] usb 4-6: new high speed USB device using ehci_hcd and address 23
[17183561.000000] usb 4-6: device not accepting address 23, error -110
[17183561.300000] usb 4-6: new high speed USB device using ehci_hcd and address 25
[17183572.844000] usb 4-6: device not accepting address 25, error -110
[17183573.144000] usb 4-6: new high speed USB device using ehci_hcd and address 27
[17183584.688000] usb 4-6: device not accepting address 27, error -110
[17183584.988000] usb 4-6: new high speed USB device using ehci_hcd and address 29
[17183596.532000] usb 4-6: device not accepting address 29, error -110
[17183596.832000] usb 4-6: new high speed USB device using ehci_hcd and address 31
[17183608.376000] usb 4-6: device not accepting address 31, error -110
[17183608.676000] usb 4-6: new high speed USB device using ehci_hcd and address 33
[17183620.220000] usb 4-6: device not accepting address 33, error -110
[17183620.520000] usb 4-6: new high speed USB device using ehci_hcd and address 35
[17183632.064000] usb 4-6: device not accepting address 35, error -110
[17183632.364000] usb 4-6: new high speed USB device using ehci_hcd and address 37
[17183643.908000] usb 4-6: device not accepting address 37, error -110
[17183644.208000] usb 4-6: new high speed USB device using ehci_hcd and address 39
[17183655.752000] usb 4-6: device not accepting address 39, error -110
[17183656.052000] usb 4-6: new high speed USB device using ehci_hcd and address 41
[17183667.596000] usb 4-6: device not accepting address 41, error -110
[17183667.896000] usb 4-6: new high speed USB device using ehci_hcd and address 43
[17183679.440000] usb 4-6: device not accepting address 43, error -110
[17183679.740000] usb 4-6: new high speed USB device using ehci_hcd and address 45
[17183691.284000] usb 4-6: device not accepting address 45, error -110
[17183691.584000] usb 4-6: new high speed USB device using ehci_hcd and address 47
[17183703.128000] usb 4-6: device not accepting address 47, error -110
[17183703.428000] usb 4-6: new high speed USB device using ehci_hcd and address 49
[17183714.972000] usb 4-6: device not accepting address 49, error -110
[17183715.272000] usb 4-6: new high speed USB device using ehci_hcd and address 51
[17183726.816000] usb 4-6: device not accepting address 51, error -110
[17183727.116000] usb 4-6: new high speed USB device using ehci_hcd and address 53
[17183738.660000] usb 4-6: device not accepting address 53, error -110
[17183738.960000] usb 4-6: new high speed USB device using ehci_hcd and address 55
[17183750.504000] usb 4-6: device not accepting address 55, error -110
[17183750.804000] usb 4-6: new high speed USB device using ehci_hcd and address 57
[17183762.348000] usb 4-6: device not accepting address 57, error -110
[17183762.648000] usb 4-6: new high speed USB device using ehci_hcd and address 59
[17183774.192000] usb 4-6: device not accepting address 59, error -110
[17183774.492000] usb 4-6: new high speed USB device using ehci_hcd and address 61
[17183786.036000] usb 4-6: device not accepting address 61, error -110
[17183786.336000] usb 4-6: new high speed USB device using ehci_hcd and address 63
[17183797.880000] usb 4-6: device not accepting address 63, error -110
[17183798.180000] usb 4-6: new high speed USB device using ehci_hcd and address 65
[17183809.724000] usb 4-6: device not accepting address 65, error -110
[17183810.024000] usb 4-6: new high speed USB device using ehci_hcd and address 67
[17183821.568000] usb 4-6: device not accepting address 67, error -110
[17183821.868000] usb 4-6: new high speed USB device using ehci_hcd and address 69
[17183833.412000] usb 4-6: device not accepting address 69, error -110
[17183833.712000] usb 4-6: new high speed USB device using ehci_hcd and address 71
[17183845.256000] usb 4-6: device not accepting address 71, error -110
[17183845.556000] usb 4-6: new high speed USB device using ehci_hcd and address 73
[17183857.100000] usb 4-6: device not accepting address 73, error -110
[17183857.400000] usb 4-6: new high speed USB device using ehci_hcd and address 75
[17183868.944000] usb 4-6: device not accepting address 75, error -110
[17183869.244000] usb 4-6: new high speed USB device using ehci_hcd and address 77
[17183880.788000] usb 4-6: device not accepting address 77, error -110
[17183881.088000] usb 4-6: new high speed USB device using ehci_hcd and address 79
[17183892.632000] usb 4-6: device not accepting address 79, error -110
[17183892.932000] usb 4-6: new high speed USB device using ehci_hcd and address 81
[17183904.476000] usb 4-6: device not accepting address 81, error -110
[17183904.776000] usb 4-6: new high speed USB device using ehci_hcd and address 83
[17183916.320000] usb 4-6: device not accepting address 83, error -110
[17183916.620000] usb 4-6: new high speed USB device using ehci_hcd and address 85
[17183928.164000] usb 4-6: device not accepting address 85, error -110
[17183928.464000] usb 4-6: new high speed USB device using ehci_hcd and address 87
[17183940.008000] usb 4-6: device not accepting address 87, error -110
[17183940.308000] usb 4-6: new high speed USB device using ehci_hcd and address 89
[17183951.852000] usb 4-6: device not accepting address 89, error -110
[17183952.152000] usb 4-6: new high speed USB device using ehci_hcd and address 91
[17183963.696000] usb 4-6: device not accepting address 91, error -110
[17183963.996000] usb 4-6: new high speed USB device using ehci_hcd and address 93
[17183975.540000] usb 4-6: device not accepting address 93, error -110
[17183975.840000] usb 4-6: new high speed USB device using ehci_hcd and address 95
[17183987.384000] usb 4-6: device not accepting address 95, error -110
[17183987.684000] usb 4-6: new high speed USB device using ehci_hcd and address 97

The PC was bought second hand to try Linux on so I didn't get a Motherboard manual but I have looked at the board itself and it is a PC chips marked M925 V7.1. I am assuming it is a problem with this type of board.

Can anyone help please?

John East

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
John East
Solved:
2007-02-12
Last query:
2007-02-12
Last reply:
2007-02-10
Andy Press (andy101) said : #1

Is the first dmesg the full output taken after usb stick is inserted?

Did you give it time to load?

Not sure precisly what the issue is, but can you provided the following information:

Output of:
 lsmod | grep -i 'usb'

both before and after inserting USB stick.

the output of:
 find /lib/modules/`uname --kernel-release` -iname '*usb*storage.ko' -or -iname '*scsi*mod*.ko'

What filesystem is the USB stick formated with?

Can you try the slax liveCD again and type 'dmesg' after inserting the stick?
Also can you post the output of:
mount
from the slax CD.

Can you also try the following procedure (on Ubuntu):
Make sure the USB stick is not inserted.
Type: sudo rmmod usd_storage
Insert USB stick
Type: sudo modprobe usb_storage
Post output of dmesg

can you also post output of:
ls /dev/sd*
both before and after inserting the USB stick.

Thanks

Ruben Romero (huayra) said : #2

What kind of result do you get if using some other usb port?

try the recommendations from Andy above and I think we will be able to find out about this one.

I have yet to see a usb stick not been recognized by ubuntu, so this one sounds like something we should look into.

Good luck.

Mvh Ruben

John East (john-a-east) said : #3

Thanks for replying to me

I am new to Linux so please excuse me if I struggle
with all you suggested. However, to answer part of
your question, I think I just copied the last part of
the output the first time I ran dmesg. Also you could
leave the usb stick there as long as you want and
nothing happens. USB was fat 32, but I think I also
tried fat. Also,I realised I forgot to mention it was
Ubuntu 6.06, but I tried a live cd for 6.10 and it was
the same. I am working now and may not be able to
answer your other questions for a day or two, will try
to do so asap.

Thanks again.

John East.

--- AndyPress <email address hidden>
wrote:

> Your support request #3425 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>
> Status: Open => Needs information
>
> AndyPress requested for more information:
> Is the first dmesg the full output taken after usb
> stick is inserted?
>
> Did you give it time to load?
>
>
> Not sure precisly what the issue is, but can you
> provided the following information:
>
> Output of:
> lsmod | grep -i 'usb'
>
> both before and after inserting USB stick.
>
> the output of:
> find /lib/modules/`uname --kernel-release` -iname
> '*usb*storage.ko' -or -iname '*scsi*mod*.ko'
>
>
> What filesystem is the USB stick formated with?
>
> Can you try the slax liveCD again and type 'dmesg'
> after inserting the stick?
> Also can you post the output of:
> mount
> from the slax CD.
>
>
> Can you also try the following procedure (on
> Ubuntu):
> Make sure the USB stick is not inserted.
> Type: sudo rmmod usd_storage
> Insert USB stick
> Type: sudo modprobe usb_storage
> Post output of dmesg
>
> can you also post output of:
> ls /dev/sd*
> both before and after inserting the USB stick.
>
> Thanks
>
>
_______________________________________________________________________
> To answer this request for more information, you can
> either reply to
> this email or enter your reply at the following
> page:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>

___________________________________________________________
New Yahoo! Mail is the ultimate force in competitive emailing. Find out more at the Yahoo! Mail Championships. Plus: play games and win prizes.
http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

John East (john-a-east) said : #4

Thanks for replying to me

I am new to Linux so please excuse me if I struggle
with all you suggested. However, to answer part of
your question, I think I just copied the last part of
the output the first time I ran dmesg. Also you could
leave the usb stick there as long as you want and
nothing happens. USB was fat 32, but I think I also
tried fat. Also,I realised I forgot to mention it was
Ubuntu 6.06, but I tried a live cd for 6.10 and it was
the same. I am working now and may not be able to
answer your other questions for a day or two, will try
to do so asap.

Thanks again.

John East.

--- AndyPress <email address hidden>
wrote:

> Your support request #3425 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>
> Status: Open => Needs information
>
> AndyPress requested for more information:
> Is the first dmesg the full output taken after usb
> stick is inserted?
>
> Did you give it time to load?
>
>
> Not sure precisly what the issue is, but can you
> provided the following information:
>
> Output of:
> lsmod | grep -i 'usb'
>
> both before and after inserting USB stick.
>
> the output of:
> find /lib/modules/`uname --kernel-release` -iname
> '*usb*storage.ko' -or -iname '*scsi*mod*.ko'
>
>
> What filesystem is the USB stick formated with?
>
> Can you try the slax liveCD again and type 'dmesg'
> after inserting the stick?
> Also can you post the output of:
> mount
> from the slax CD.
>
>
> Can you also try the following procedure (on
> Ubuntu):
> Make sure the USB stick is not inserted.
> Type: sudo rmmod usd_storage
> Insert USB stick
> Type: sudo modprobe usb_storage
> Post output of dmesg
>
> can you also post output of:
> ls /dev/sd*
> both before and after inserting the USB stick.
>
> Thanks
>
>
_______________________________________________________________________
> To answer this request for more information, you can
> either reply to
> this email or enter your reply at the following
> page:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>

___________________________________________________________
Inbox full of unwanted email? Get leading protection and 1GB storage with All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html

The Linux USB FAQ has answers to your problem:
[1] http://www.linux-usb.org/FAQ.html#ts6

I suspect that your ACPI bios reports something untrue concerning interrupts to the linux kernel.

You could try the following:
Append noapic to your boot options as follows:
- Reboot and press ESC when the boot loader loads to show the boot menu. Press e on the default entry and append noapic to the line beginning with kernel.
- Boot and plug your usb stick in.
- execute dmesg and post the output again.
- Please also post the output of:
cat /proc/interrupts
before pluggin in the stick and after

You could also try this suggestions:
http://www.linux-usb.org/notAcceptFeedback.html

John East (john-a-east) said : #6

--- AndyPress <email address hidden>
wrote:

> Your support request #3425 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>
> Status: Open => Needs information
>
> AndyPress requested for more information:
> Is the first dmesg the full output taken after usb
> stick is inserted?
>
> Did you give it time to load?
>
>
> Not sure precisly what the issue is, but can you
> provided the following information:
>
> Output of:
> lsmod | grep -i 'usb'
>
> both before and after inserting USB stick.
>
> the output of:
> find /lib/modules/`uname --kernel-release` -iname
> '*usb*storage.ko' -or -iname '*scsi*mod*.ko'
>
>
> What filesystem is the USB stick formated with?
>
> Can you try the slax liveCD again and type 'dmesg'
> after inserting the stick?
> Also can you post the output of:
> mount
> from the slax CD.
>
>
> Can you also try the following procedure (on
> Ubuntu):
> Make sure the USB stick is not inserted.
> Type: sudo rmmod usd_storage
> Insert USB stick
> Type: sudo modprobe usb_storage
> Post output of dmesg
>
> can you also post output of:
> ls /dev/sd*
> both before and after inserting the USB stick.
>
> Thanks
>
>
_______________________________________________________________________
> To answer this request for more information, you can
> either reply to
> this email or enter your reply at the following
> page:
> https://answers.launchpad.net/ubuntu/+ticket/3425
> Hi

Answers to all questions including using noapic as a
boot option

Before and after inserting usb stick

john@john-desktop:~$ lsmod|grep -i 'usb'
usbcore 130820 3 ehci_hcd,uhci_hcd
john@john-desktop:~$ lsmod|grep -i 'usb'
usbcore 130820 3 ehci_hcd,uhci_hcd
john@john-desktop:~$

root@john-desktop:/home/john# ls /dev/sd*
ls: /dev/sd*: No such file or directory
root@john-desktop:/home/john# ls /dev/sd*
ls: /dev/sd*: No such file or directory
root@john-desktop:/home/john#

output as asked

root@john-desktop:/home/john# find /lib/modules/'uname
--kernel-release' -iname '*usb*storage.ko' -or -iname
'*scsi*mod*.ko'
find: /lib/modules/uname --kernel-release: No such
file or directory
root@john-desktop:/home/john#

Don't know if no such file or directory was due to an
error of mine, changed to su in case this was why.

root@john-desktop:/home/john# sudo rmmodusd_storage
sudo: rmmodusd_storage: command not found

After stick inserted
root@john-desktop:/home/john# sudo modprobe
usb_storage

root@john-desktop:/home/john# dmesg
[17179569.184000] Linux version 2.6.15-27-386
(buildd@terranova) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC
2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d0000 -
00000000000d6000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 -
000000001dff0000 (usable)
[17179569.184000] BIOS-e820: 000000001dff0000 -
000000001dff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001dff8000 -
000000001e000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 479MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fb830
[17179569.184000] On node 0 totalpages: 122864
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 118768 pages, LIFO
batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO
batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI
                  ) @ 0x000f9fb0
[17179569.184000] ACPI: RSDT (v001 AMIINT VIA_P6
0x00000010 MSFT 0x00000097) @ 0x1dff0000
[17179569.184000] ACPI: FADT (v001 AMIINT VIA_P6
0x00000011 MSFT 0x00000097) @ 0x1dff0030
[17179569.184000] ACPI: DSDT (v001 VIA APOLLO-P
0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] Intel MultiProcessor Specification
v1.1
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: VIA Product ID: 5400A
     APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] I/O APIC #2 Version 3 at 0xFEC00000.
[17179569.184000] Enabling APIC mode: Flat. Using 1
I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at
20000000 (gap: 1e000000:e0c00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1
ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order:
11, 32768 bytes)
[17179569.184000] Detected 2000.438 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.896000] Dentry cache hash table entries:
65536 (order: 6, 262144 bytes)
[17179570.896000] Inode-cache hash table entries:
32768 (order: 5, 131072 bytes)[17179570.924000]
Memory: 476724k/491456k available (1976k kernel code,
14164k reserved, 606k data, 288k init, 0k highmem)
[17179570.924000] Checking if this processor honours
the WP bit even in supervisor mode... Ok.
[17179571.004000] Calibrating delay using timer
specific routine.. 4003.95 BogoMIPS (lpj=8007908)
[17179571.004000] Security Framework v1.0.0
initialized
[17179571.004000] SELinux: Disabled at boot.
[17179571.004000] Mount-cache hash table entries: 512
[17179571.004000] CPU: After generic identify, caps:
bfebfbff 00000000 00000000 00000000 00004400 00000000
00000000
[17179571.004000] CPU: After vendor identify, caps:
bfebfbff 00000000 00000000 00000000 00004400 00000000
00000000
[17179571.004000] CPU: Trace cache: 12K uops, L1 D
cache: 8K
[17179571.004000] CPU: L2 cache: 128K
[17179571.004000] CPU: After all inits, caps: bfebfbff
00000000 00000000 00000080 00004400 00000000 00000000
[17179571.004000] mtrr: v2.0 (20020519)
[17179571.004000] CPU: Intel(R) Celeron(R) CPU 2.00GHz
stepping 09
[17179571.004000] Enabling fast FPU save and
restore... done.
[17179571.004000] Enabling unmasked SIMD FPU exception
support... done.
[17179571.004000] Checking 'hlt' instruction... OK.
[17179571.020000] checking if image is initramfs... it
is
[17179571.812000] Freeing initrd memory: 6616k freed
[17179571.852000] ACPI: Looking for DSDT ... not
found!
[17179571.856000] ACPI: setting ELCR to 0200 (from
0820)
[17179571.856000] ExtINT not setup in hardware but
reported by MP table
[17179571.856000] ENABLING IO-APIC IRQs
[17179571.856000] ..TIMER: vector=0x31 apic1=0 pin1=2
apic2=0 pin2=0
[17179572.000000] NET: Registered protocol family 16
[17179572.000000] EISA bus registered
[17179572.000000] ACPI: bus type pci registered
[17179572.008000] PCI: PCI BIOS revision 2.10 entry at
0xfdaf1, last bus=1
[17179572.008000] PCI: Using configuration type 1
[17179572.008000] ACPI: Subsystem revision 20051216
[17179572.016000] ACPI: Interpreter enabled
[17179572.016000] ACPI: Using PIC for interrupt
routing
[17179572.016000] ACPI: PCI Root Bridge [PCI0]
(0000:00)
[17179572.016000] PCI: Probing PCI hardware (bus 00)
[17179572.020000] PCI quirk: region 0800-087f claimed
by vt8235 PM
[17179572.020000] PCI quirk: region 0400-040f claimed
by vt8235 SMB
[17179572.020000] Boot video device is 0000:01:00.0
[17179572.020000] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
[17179572.052000] ACPI: Power Resource [URP1] (off)
[17179572.052000] ACPI: Power Resource [URP2] (off)
[17179572.052000] ACPI: Power Resource [FDDP] (off)
[17179572.052000] ACPI: Power Resource [LPTP] (off)
[17179572.056000] ACPI: PCI Interrupt Link [LNKA]
(IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.060000] ACPI: PCI Interrupt Link [LNKB]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.060000] ACPI: PCI Interrupt Link [LNKC]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.060000] ACPI: PCI Interrupt Link [LNKD]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.060000] Linux Plug and Play Support v0.97
(c) Adam Belay
[17179572.060000] pnp: PnP ACPI init
[17179572.068000] pnp: PnP ACPI: found 11 devices
[17179572.068000] PnPBIOS: Disabled by ACPI PNP
[17179572.068000] PCI: Using ACPI for IRQ routing
[17179572.068000] PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
[17179572.072000] PCI: Bridge: 0000:00:01.0
[17179572.072000] IO window: disabled.
[17179572.072000] MEM window: dfd00000-dfefffff
[17179572.072000] PREFETCH window: cfb00000-dfbfffff
[17179572.072000] PCI: Setting latency timer of device
0000:00:01.0 to 64
[17179572.072000] audit: initializing netlink socket
(disabled)
[17179572.072000] audit(1170357443.072:1): initialized
[17179572.076000] VFS: Disk quotas dquot_6.5.1
[17179572.076000] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
[17179572.076000] Initializing Cryptographic API
[17179572.076000] io scheduler noop registered
[17179572.076000] io scheduler anticipatory registered
[17179572.076000] io scheduler deadline registered
[17179572.076000] io scheduler cfq registered
[17179572.076000] isapnp: Scanning for PnP cards...
[17179572.428000] isapnp: No Plug & Play device found
[17179572.536000] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179572.536000] serio: i8042 AUX port at 0x60,0x64
irq 12
[17179572.536000] serio: i8042 KBD port at 0x60,0x64
irq 1
[17179572.536000] Serial: 8250/16550 driver $Revision:
1.90 $ 48 ports, IRQ sharing enabled
[17179572.536000] serial8250: ttyS0 at I/O 0x3f8 (irq
= 4) is a 16550A
[17179572.552000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
[17179572.552000] RAMDISK driver initialized: 16 RAM
disks of 65536K size 1024 blocksize
[17179572.552000] Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
[17179572.556000] ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
[17179572.556000] mice: PS/2 mouse device common for
all mice
[17179572.556000] EISA: Probing bus 0 at eisa.0
[17179572.556000] EISA: Detected 0 cards.
[17179572.556000] NET: Registered protocol family 2
[17179572.576000] input: AT Translated Set 2 keyboard
as /class/input/input0
[17179572.596000] IP route cache hash table entries:
4096 (order: 2, 16384 bytes)
[17179572.596000] TCP established hash table entries:
16384 (order: 4, 65536 bytes)
[17179572.596000] TCP bind hash table entries: 16384
(order: 4, 65536 bytes)
[17179572.596000] TCP: Hash tables configured
(established 16384 bind 16384)
[17179572.596000] TCP reno registered
[17179572.596000] TCP bic registered
[17179572.596000] NET: Registered protocol family 1
[17179572.596000] NET: Registered protocol family 8
[17179572.596000] NET: Registered protocol family 20
[17179572.596000] Using IPI Shortcut mode
[17179572.596000] ACPI wakeup devices:
[17179572.596000] PCI0 UAR1 USB1 USB2 USB3 EHCI AC9
MC9 ILAN SLPB
[17179572.596000] ACPI: (supports S0 S1 S4 S5)
[17179572.596000] Freeing unused kernel memory: 288k
freed
[17179572.716000] vga16fb: initializing
[17179572.716000] vga16fb: mapped to 0xc00a0000
[17179572.852000] Console: switching to colour frame
buffer device 80x25
[17179572.852000] fb0: VGA16 VGA frame buffer device
[17179573.992000] Capability LSM initialized
[17179574.088000] ACPI: Processor [CPU1] (supports 16
throttling states)
[17179575.788000] VP_IDE: IDE controller at PCI slot
0000:00:11.1
[17179575.788000] ACPI: PCI Interrupt 0000:00:11.1[A]:
no GSI
[17179575.788000] PCI: Via IRQ fixup for 0000:00:11.1,
from 255 to 15
[17179575.788000] VP_IDE: chipset revision 6
[17179575.788000] VP_IDE: not 100% native mode: will
probe irqs later
[17179575.788000] VP_IDE: VIA vt8235 (rev 00) IDE
UDMA133 controller on pci0000:00:11.1
[17179575.788000] ide0: BM-DMA at 0xfc00-0xfc07,
BIOS settings: hda:DMA, hdb:pio
[17179575.788000] ide1: BM-DMA at 0xfc08-0xfc0f,
BIOS settings: hdc:DMA, hdd:pio
[17179575.788000] Probing IDE interface ide0...
[17179576.208000] hda: SAMSUNG SV4012H, ATA DISK drive
[17179576.880000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.896000] Probing IDE interface ide1...
[17179577.760000] hdc: SONY CD-RW CRX320E, ATAPI
CD/DVD-ROM drive
[17179578.432000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.448000] hda: max request size: 128KiB
[17179578.468000] hda: 78242976 sectors (40060 MB)
w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179578.468000] hda: cache flushes supported
[17179578.468000] hda: hda1 hda2 < hda5 >
[17179578.500000] hdc: ATAPI 52X DVD-ROM CD-R/RW
drive, 2048kB Cache, UDMA(33)
[17179578.500000] Uniform CD-ROM driver Revision: 3.20
[17179578.852000] usbcore: registered new driver usbfs
[17179578.856000] usbcore: registered new driver hub
[17179578.860000] USB Universal Host Controller
Interface driver v2.3
[17179578.860000] **** SET: Misaligned resource
pointer: ddc02402 Type 07 Len 0
[17179578.860000] ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 5
[17179578.860000] PCI: setting IRQ 5 as
level-triggered
[17179578.860000] ACPI: PCI Interrupt 0000:00:10.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179578.860000] uhci_hcd 0000:00:10.0: UHCI Host
Controller
[17179578.860000] uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 1
[17179578.860000] uhci_hcd 0000:00:10.0: irq 5, io
base 0x0000e400
[17179578.864000] hub 1-0:1.0: USB hub found
[17179578.864000] hub 1-0:1.0: 2 ports detected
[17179578.968000] **** SET: Misaligned resource
pointer: ddc02102 Type 07 Len 0
[17179578.968000] ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 11
[17179578.968000] PCI: setting IRQ 11 as
level-triggered
[17179578.968000] ACPI: PCI Interrupt 0000:00:10.1[B]
-> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179578.968000] uhci_hcd 0000:00:10.1: UHCI Host
Controller
[17179578.968000] uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 2
[17179578.968000] uhci_hcd 0000:00:10.1: irq 11, io
base 0x0000e800
[17179578.968000] hub 2-0:1.0: USB hub found
[17179578.968000] hub 2-0:1.0: 2 ports detected
[17179579.072000] **** SET: Misaligned resource
pointer: ddbeacc2 Type 07 Len 0
[17179579.072000] ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 11
[17179579.072000] ACPI: PCI Interrupt 0000:00:10.2[C]
-> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179579.072000] uhci_hcd 0000:00:10.2: UHCI Host
Controller
[17179579.072000] uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 3
[17179579.072000] uhci_hcd 0000:00:10.2: irq 11, io
base 0x0000ec00
[17179579.072000] hub 3-0:1.0: USB hub found
[17179579.072000] hub 3-0:1.0: 2 ports detected
[17179579.180000] **** SET: Misaligned resource
pointer: ddbea9c2 Type 07 Len 0
[17179579.180000] ACPI: PCI Interrupt Link [LNKD]
enabled at IRQ 11
[17179579.180000] ACPI: PCI Interrupt 0000:00:10.3[D]
-> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179579.180000] ehci_hcd 0000:00:10.3: EHCI Host
Controller
[17179579.184000] ehci_hcd 0000:00:10.3: new USB bus
registered, assigned bus number 4
[17179579.184000] ehci_hcd 0000:00:10.3: irq 11, io
mem 0xdfffff00
[17179579.184000] ehci_hcd 0000:00:10.3: USB 2.0
started, EHCI 1.00, driver 10 Dec 2004
[17179579.184000] hub 4-0:1.0: USB hub found
[17179579.184000] hub 4-0:1.0: 6 ports detected
[17179579.436000] Attempting manual resume
[17179579.508000] EXT3-fs: mounted filesystem with
ordered data mode.
[17179579.528000] kjournald starting. Commit interval
5 seconds
[17179579.736000] hub 4-0:1.0: over-current change on
port 2
[17179593.040000] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
[17179593.108000] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
[17179593.120000] Linux agpgart interface v0.101 (c)
Dave Jones
[17179593.136000] agpgart: Detected VIA P4M266x/P4N266
chipset
[17179593.140000] agpgart: AGP aperture is 64M @
0xe0000000
[17179593.420000] via-rhine.c:v1.10-LK1.2.0-2.6
June-10-2004 Written by Donald Becker
[17179593.420000] ACPI: PCI Interrupt 0000:00:12.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179593.424000] eth0: VIA Rhine II at 0x1dc00,
00:0a:e6:d7:70:f7, IRQ 5.
[17179593.424000] eth0: MII PHY found at address 1,
status 0x786d advertising 05e1 Link 45e1.
[17179593.508000] parport: PnPBIOS parport detected.
[17179593.508000] parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE]
[17179594.060000] ACPI: PCI Interrupt 0000:00:11.5[C]
-> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179594.060000] PCI: Setting latency timer of device
0000:00:11.5 to 64
[17179594.192000] irda_init()
[17179594.192000] NET: Registered protocol family 23
[17179594.356000] input: ImPS/2 Generic Wheel Mouse as
/class/input/input1
[17179594.468000] input: PC Speaker as
/class/input/input2
[17179594.480000] Floppy drive(s): fd0 is 1.44M
[17179594.488000] ts: Compaq touchscreen protocol
output
[17179594.524000] FDC 0 is a post-1991 82077
[17179594.792000] Real Time Clock Driver v1.12
[17179595.596000] eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[17179595.868000] lp0: using parport0
(interrupt-driven).
[17179596.000000] Adding 1413680k swap on /dev/hda5.
Priority:-1 extents:1 across:1413680k
[17179596.188000] EXT3 FS on hda1, internal journal
[17179596.516000] md: md driver 0.90.3
MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179596.516000] md: bitmap version 4.39
[17179596.660000] NET: Registered protocol family 17
[17179597.260000] device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: <email address hidden>
[17179598.364000] cdrom: open failed.
[17179599.964000] NET: Registered protocol family 10
[17179599.964000] lo: Disabled Privacy Extensions
[17179599.964000] IPv6 over IPv4 tunneling driver
[17179607.376000] ACPI: Power Button (FF) [PWRF]
[17179607.376000] ACPI: Power Button (CM) [PWRB]
[17179607.376000] ACPI: Sleep Button (CM) [SLPB]
[17179607.568000] ibm_acpi: ec object not found
[17179607.616000] pcc_acpi: loading...
[17179610.900000] eth0: no IPv6 routers present
[17179618.836000] [drm] Initialized drm 1.0.1 20051102
[17179618.856000] ACPI: PCI Interrupt 0000:01:00.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179618.860000] [drm] Initialized savage 2.4.1
20050313 on minor 0
[17179618.860000] mtrr: base(0xd2000000) is not
aligned on a size(0x5000000) boundary
[17179618.860000] agpgart: Found an AGP 2.0 compliant
device at 0000:00:00.0.
[17179618.860000] agpgart: Putting AGP V2 device at
0000:00:00.0 into 0x mode
[17179618.860000] agpgart: Putting AGP V2 device at
0000:01:00.0 into 0x mode
[17179620.680000] ppdev: user-space parallel port
driver
[17179621.164000] apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)
[17179621.164000] apm: overridden by ACPI.
[17179622.368000] Bluetooth: Core ver 2.8
[17179622.368000] NET: Registered protocol family 31
[17179622.368000] Bluetooth: HCI device and connection
manager initialized
[17179622.368000] Bluetooth: HCI socket layer
initialized
[17179622.392000] Bluetooth: L2CAP ver 2.8
[17179622.392000] Bluetooth: L2CAP socket layer
initialized
[17179622.440000] Bluetooth: RFCOMM socket layer
initialized
[17179622.440000] Bluetooth: RFCOMM TTY layer
initialized
[17179622.440000] Bluetooth: RFCOMM ver 1.7
[17179927.540000] usb 4-6: new high speed USB device
using ehci_hcd and address 2
[17179927.868000] irq 5: nobody cared (try booting
with the "irqpoll" option)
[17179927.868000] [<c013ee82>]
__report_bad_irq+0x22/0x80
[17179927.868000] [<c013ef78>]
note_interrupt+0x68/0xc0
[17179927.868000] [<c013e83c>] __do_IRQ+0xbc/0xe0
[17179927.868000] [<c010596a>] do_IRQ+0x1a/0x30
[17179927.868000] [<c01040aa>]
common_interrupt+0x1a/0x20
[17179927.868000] [<c010106a>] default_idle+0x3a/0x70
[17179927.868000] [<c01010dc>] cpu_idle+0x1c/0x60
[17179927.868000] [<c03887c6>]
start_kernel+0x176/0x1d0
[17179927.868000] handlers:
[17179927.868000] [<de8ca730>] (usb_hcd_irq+0x0/0x60
[usbcore])
[17179927.868000] [<de9166f0>]
(rhine_interrupt+0x0/0x240 [via_rhine])
[17179927.868000] Disabling IRQ #5
[17179928.540000] ehci_hcd 0000:00:10.3: Unlink after
no-IRQ? Controller is probably using the wrong IRQ.
[17179939.084000] usb 4-6: device not accepting
address 2, error -110
[17179939.384000] usb 4-6: new high speed USB device
using ehci_hcd and address 4
[17179950.928000] usb 4-6: device not accepting
address 4, error -110
[17179951.228000] usb 4-6: new high speed USB device
using ehci_hcd and address 6
[17179962.772000] usb 4-6: device not accepting
address 6, error -110
[17179963.072000] usb 4-6: new high speed USB device
using ehci_hcd and address 8
[17179974.616000] usb 4-6: device not accepting
address 8, error -110
[17179974.916000] usb 4-6: new high speed USB device
using ehci_hcd and address 10
[17179986.460000] usb 4-6: device not accepting
address 10, error -110
[17179986.760000] usb 4-6: new high speed USB device
using ehci_hcd and address 12
[17179998.304000] usb 4-6: device not accepting
address 12, error -110
[17179998.604000] usb 4-6: new high speed USB device
using ehci_hcd and address 14
[17180010.148000] usb 4-6: device not accepting
address 14, error -110
[17180010.448000] usb 4-6: new high speed USB device
using ehci_hcd and address 16
[17180017.000000] SCSI subsystem initialized
[17180017.056000] Initializing USB Mass Storage
driver...
[17180021.992000] usb 4-6: device not accepting
address 16, error -110
[17180022.048000] usbcore: registered new driver
usb-storage
[17180022.048000] USB Mass Storage support registered.
[17180022.292000] usb 4-6: new high speed USB device
using ehci_hcd and address 18
[17180033.836000] usb 4-6: device not accepting
address 18, error -110
[17180034.136000] usb 4-6: new high speed USB device
using ehci_hcd and address 20
root@john-desktop:/home/john#

Noticed that after trying to get usb stick working,
internet connection via networked router stopped
working. Restart machine and it works again.

Output from Slax cd
root@slax:~# mount
tmpfs on / type tmpfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/hda1 on /mnt/hda1 type ext3 (rw)
usbfs on /proc/bus/usb type usbfs (rw)

root@slax:~# dmesg
Linux version 2.6.16 (root@slax) (gcc version 3.4.6)
#4 Fri May 5 17:48:08 GMT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000d0000 - 00000000000d6000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 000000001dff0000
(usable)
BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI
data)
BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI
NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
0MB HIGHMEM available.
479MB LOWMEM available.
On node 0 totalpages: 122864
 DMA zone: 4096 pages, LIFO batch:0
 DMA32 zone: 0 pages, LIFO batch:0
 Normal zone: 118768 pages, LIFO batch:31
 HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI
) @ 0x000f9fb0
ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT
0x00000097) @ 0x1dff0000
ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT
0x00000097) @ 0x1dff0030
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT
0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap:
1e000000:e0c00000)
Built 1 zonelists
Kernel command line: vga=769 max_loop=255
initrd=boot/initrd.gz init=linuxrc load_ramdisk=1
prompt_ramdisk=0 ramdisk_size=4444 root=/dev/ram0 rw
BOOT_IMAGE=boot/vmlinuz
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2000.331 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
Inode-cache hash table entries: 32768 (order: 5,
131072 bytes)
Memory: 478996k/491456k available (4166k kernel code,
11820k reserved, 1287k data, 496k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay using timer specific routine..
4006.34 BogoMIPS (lpj=8012693)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000
00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000
00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0820)
checking if image is initramfs...it isn't (no cpio
magic); looks like an initrd
Freeing initrd memory: 1293k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last
bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11
12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11
12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11
12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11
12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
PCI: Bridge: 0000:00:01.0
 IO window: disabled.
 MEM window: dfd00000-dfefffff
 PREFETCH window: cfb00000-dfbfffff
PCI: Setting latency timer of device 0000:00:01.0 to
64
apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
NTFS driver 2.1.26 [Flags: R/O].
JFS: nTxBlock = 3754, nTxLock = 30034
SGI XFS with ACLs, security attributes, large block
numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to
0xdea80000, using 600k, total 31680k
vesafb: mode is 640x480x8, linelength=640, pages=98
vesafb: protected mode interface info at c000:6e5d
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4444K size
1024 blocksize
loop: loaded (max 255 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10)
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
   ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings:
hda:DMA, hdb:pio
   ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings:
hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SV4012H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78242976 sectors (40060 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache,
UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-4 May 4 2006 18:40:51)
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O
address and IRQ using iobase= and irq= optionsEmulex
LightPulse Fibre Channel SCSI driver 8.1.1
Copyright(c) 2004-2005 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7
00:01:03 EST 2005)
megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22
EST 2005)
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux
v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux
v2.26.02.007.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.1.2
(February 8, 2006)
libata version 1.20 loaded.
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
Fusion MPT FC Host driver 3.03.07
Fusion MPT SAS Host driver 3.03.07
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as
/class/input/input0
IP route cache hash table entries: 4096 (order: 2,
16384 bytes)
TCP established hash table entries: 16384 (order: 4,
65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536
bytes)
TCP: Hash tables configured (established 16384 bind
16384)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 EHCI AC9 MC9 ILAN SLPB
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is
recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 496k freed
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering unionfs 20060423-1600
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding 1413680k swap on /dev/hda5. Priority:-1
extents:1 across:1413680k
Linux agpgart interface v0.101 (c) Dave Jones
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: ImPS/2 Generic Wheel Mouse as
/class/input/input1
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by
Donald Becker
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5
eth0: VIA Rhine II at 0xdffffe00, 00:0a:e6:d7:70:f7,
IRQ 5.
eth0: MII PHY found at address 1, status 0x786d
advertising 05e1 Link 45e1.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] ->
GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to
64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] ->
GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered,
assigned bus number 1
ehci_hcd 0000:00:10.3: irq 11, io mem 0xdfffff00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: over-current change on port 2
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 2
uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] ->
GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered,
assigned bus number 3
uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] ->
GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered,
assigned bus number 4
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000ec00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
agpgart: Detected VIA P4M266x/P4N266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5
[drm] Initialized savage 2.4.1 20050313 on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing
0xd0000000,0x2000000
mtrr: base(0xd2000000) is not aligned on a
size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x
mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x
mode
usb 1-6: new high speed USB device using ehci_hcd and
address 2
usb 1-6: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before
scanning
 Vendor: Model: disgo Rev: 1.02
 Type: Direct-Access ANSI SCSI
revision: 00
SCSI device sda: 1005568 512-byte hdwr sectors (515
MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 1005568 512-byte hdwr sectors (515
MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 2:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete

Ubuntu using noapic as a boot option - the usb stick
works! The effect is not permanent, presumably there
is some way of changing the boot loader permanently.
Is there a down side to doing this? Anyway, output
after doing this follows.

john@john-desktop:~$ cat /proc/interrupts
           CPU0
  0: 34005 XT-PIC timer
  1: 87 XT-PIC i8042
  2: 0 XT-PIC cascade
  5: 28 XT-PIC uhci_hcd:usb1, eth0
  7: 0 XT-PIC parport0
  8: 3 XT-PIC rtc
  9: 0 XT-PIC acpi
 10: 0 XT-PIC MPU401 UART
 11: 1969 XT-PIC uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, VIA8233
 12: 733 XT-PIC i8042
 14: 5860 XT-PIC ide0
 15: 1801 XT-PIC ide1
NMI: 0
LOC: 33764
ERR: 0
MIS: 0
after stick inserted
$ cat /proc/interrupts
           CPU0
  0: 42648 XT-PIC timer
  1: 129 XT-PIC i8042
  2: 0 XT-PIC cascade
  5: 28 XT-PIC uhci_hcd:usb1, eth0
  7: 0 XT-PIC parport0
  8: 3 XT-PIC rtc
  9: 0 XT-PIC acpi
 10: 0 XT-PIC MPU401 UART
 11: 2289 XT-PIC uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, VIA8233
 12: 1241 XT-PIC i8042
 14: 6184 XT-PIC ide0
 15: 2396 XT-PIC ide1
NMI: 0
LOC: 42407
ERR: 0
MIS: 0
john@john-desktop:~$

john@john-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-386
(buildd@terranova) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC
2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d0000 -
00000000000d6000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 -
000000001dff0000 (usable)
[17179569.184000] BIOS-e820: 000000001dff0000 -
000000001dff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001dff8000 -
000000001e000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 479MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fb830
[17179569.184000] On node 0 totalpages: 122864
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 118768 pages, LIFO
batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO
batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI
                  ) @ 0x000f9fb0
[17179569.184000] ACPI: RSDT (v001 AMIINT VIA_P6
0x00000010 MSFT 0x00000097) @ 0x1dff0000
[17179569.184000] ACPI: FADT (v001 AMIINT VIA_P6
0x00000011 MSFT 0x00000097) @ 0x1dff0030
[17179569.184000] ACPI: DSDT (v001 VIA APOLLO-P
0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] Intel MultiProcessor Specification
v1.1
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: VIA Product ID: 5400A
     APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] I/O APIC #2 Version 3 at 0xFEC00000.
[17179569.184000] Enabling APIC mode: Flat. Using 1
I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at
20000000 (gap: 1e000000:e0c00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1
ro quiet splash noapic
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order:
11, 32768 bytes)
[17179569.184000] Detected 2000.235 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.928000] Dentry cache hash table entries:
65536 (order: 6, 262144 bytes)
[17179569.928000] Inode-cache hash table entries:
32768 (order: 5, 131072 bytes)[17179569.952000]
Memory: 476724k/491456k available (1976k kernel code,
14164k reserved, 606k data, 288k init, 0k highmem)
[17179569.952000] Checking if this processor honours
the WP bit even in supervisor mode... Ok.
[17179570.032000] Calibrating delay using timer
specific routine.. 4004.15 BogoMIPS (lpj=8008300)
[17179570.032000] Security Framework v1.0.0
initialized
[17179570.032000] SELinux: Disabled at boot.
[17179570.032000] Mount-cache hash table entries: 512
[17179570.032000] CPU: After generic identify, caps:
bfebfbff 00000000 00000000 00000000 00004400 00000000
00000000
[17179570.032000] CPU: After vendor identify, caps:
bfebfbff 00000000 00000000 00000000 00004400 00000000
00000000
[17179570.032000] CPU: Trace cache: 12K uops, L1 D
cache: 8K
[17179570.032000] CPU: L2 cache: 128K
[17179570.032000] CPU: After all inits, caps: bfebfbff
00000000 00000000 00000080 00004400 00000000 00000000
[17179570.032000] mtrr: v2.0 (20020519)
[17179570.032000] CPU: Intel(R) Celeron(R) CPU 2.00GHz
stepping 09
[17179570.032000] Enabling fast FPU save and
restore... done.
[17179570.032000] Enabling unmasked SIMD FPU exception
support... done.
[17179570.032000] Checking 'hlt' instruction... OK.
[17179570.048000] checking if image is initramfs... it
is
[17179570.840000] Freeing initrd memory: 6616k freed
[17179570.880000] ACPI: Looking for DSDT ... not
found!
[17179570.884000] ACPI: setting ELCR to 0200 (from
0820)
[17179570.988000] NET: Registered protocol family 16
[17179570.988000] EISA bus registered
[17179570.988000] ACPI: bus type pci registered
[17179570.992000] PCI: PCI BIOS revision 2.10 entry at
0xfdaf1, last bus=1
[17179570.992000] PCI: Using configuration type 1
[17179570.992000] ACPI: Subsystem revision 20051216
[17179571.000000] ACPI: Interpreter enabled
[17179571.000000] ACPI: Using PIC for interrupt
routing
[17179571.000000] ACPI: PCI Root Bridge [PCI0]
(0000:00)
[17179571.000000] PCI: Probing PCI hardware (bus 00)
[17179571.004000] PCI quirk: region 0800-087f claimed
by vt8235 PM
[17179571.004000] PCI quirk: region 0400-040f claimed
by vt8235 SMB
[17179571.004000] Boot video device is 0000:01:00.0
[17179571.004000] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
[17179571.036000] ACPI: Power Resource [URP1] (off)
[17179571.036000] ACPI: Power Resource [URP2] (off)
[17179571.036000] ACPI: Power Resource [FDDP] (off)
[17179571.036000] ACPI: Power Resource [LPTP] (off)
[17179571.044000] ACPI: PCI Interrupt Link [LNKA]
(IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.044000] ACPI: PCI Interrupt Link [LNKB]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.044000] ACPI: PCI Interrupt Link [LNKC]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.044000] ACPI: PCI Interrupt Link [LNKD]
(IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.044000] Linux Plug and Play Support v0.97
(c) Adam Belay
[17179571.044000] pnp: PnP ACPI init
[17179571.052000] pnp: PnP ACPI: found 11 devices
[17179571.052000] PnPBIOS: Disabled by ACPI PNP
[17179571.052000] PCI: Using ACPI for IRQ routing
[17179571.052000] PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
[17179571.056000] PCI: Bridge: 0000:00:01.0
[17179571.056000] IO window: disabled.
[17179571.056000] MEM window: dfd00000-dfefffff
[17179571.056000] PREFETCH window: cfb00000-dfbfffff
[17179571.056000] PCI: Setting latency timer of device
0000:00:01.0 to 64
[17179571.060000] audit: initializing netlink socket
(disabled)
[17179571.060000] audit(1170503463.060:1): initialized
[17179571.060000] VFS: Disk quotas dquot_6.5.1
[17179571.060000] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
[17179571.060000] Initializing Cryptographic API
[17179571.060000] io scheduler noop registered
[17179571.060000] io scheduler anticipatory registered
[17179571.060000] io scheduler deadline registered
[17179571.060000] io scheduler cfq registered
[17179571.060000] isapnp: Scanning for PnP cards...
[17179571.416000] isapnp: No Plug & Play device found
[17179571.524000] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.524000] serio: i8042 AUX port at 0x60,0x64
irq 12
[17179571.524000] serio: i8042 KBD port at 0x60,0x64
irq 1
[17179571.524000] Serial: 8250/16550 driver $Revision:
1.90 $ 48 ports, IRQ sharing enabled
[17179571.524000] serial8250: ttyS0 at I/O 0x3f8 (irq
= 4) is a 16550A
[17179571.540000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
[17179571.540000] RAMDISK driver initialized: 16 RAM
disks of 65536K size 1024 blocksize
[17179571.540000] Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
[17179571.540000] ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
[17179571.540000] mice: PS/2 mouse device common for
all mice
[17179571.544000] EISA: Probing bus 0 at eisa.0
[17179571.544000] EISA: Detected 0 cards.
[17179571.544000] NET: Registered protocol family 2
[17179571.564000] input: AT Translated Set 2 keyboard
as /class/input/input0
[17179571.584000] IP route cache hash table entries:
4096 (order: 2, 16384 bytes)
[17179571.584000] TCP established hash table entries:
16384 (order: 4, 65536 bytes)
[17179571.584000] TCP bind hash table entries: 16384
(order: 4, 65536 bytes)
[17179571.584000] TCP: Hash tables configured
(established 16384 bind 16384)
[17179571.584000] TCP reno registered
[17179571.584000] TCP bic registered
[17179571.584000] NET: Registered protocol family 1
[17179571.584000] NET: Registered protocol family 8
[17179571.584000] NET: Registered protocol family 20
[17179571.584000] Using IPI Shortcut mode
[17179571.584000] ACPI wakeup devices:
[17179571.584000] PCI0 UAR1 USB1 USB2 USB3 EHCI AC9
MC9 ILAN SLPB
[17179571.584000] ACPI: (supports S0 S1 S4 S5)
[17179571.584000] Freeing unused kernel memory: 288k
freed
[17179571.704000] vga16fb: initializing
[17179571.704000] vga16fb: mapped to 0xc00a0000
[17179571.836000] Console: switching to colour frame
buffer device 80x25
[17179571.836000] fb0: VGA16 VGA frame buffer device
[17179572.984000] Capability LSM initialized
[17179573.080000] ACPI: Processor [CPU1] (supports 16
throttling states)
[17179574.764000] VP_IDE: IDE controller at PCI slot
0000:00:11.1
[17179574.764000] ACPI: PCI Interrupt 0000:00:11.1[A]:
no GSI
[17179574.764000] PCI: Via IRQ fixup for 0000:00:11.1,
from 255 to 15
[17179574.764000] VP_IDE: chipset revision 6
[17179574.764000] VP_IDE: not 100% native mode: will
probe irqs later
[17179574.764000] VP_IDE: VIA vt8235 (rev 00) IDE
UDMA133 controller on pci0000:00:11.1
[17179574.764000] ide0: BM-DMA at 0xfc00-0xfc07,
BIOS settings: hda:DMA, hdb:pio
[17179574.764000] ide1: BM-DMA at 0xfc08-0xfc0f,
BIOS settings: hdc:DMA, hdd:pio
[17179574.764000] Probing IDE interface ide0...
[17179575.180000] hda: SAMSUNG SV4012H, ATA DISK drive
[17179575.852000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.868000] Probing IDE interface ide1...
[17179576.732000] hdc: SONY CD-RW CRX320E, ATAPI
CD/DVD-ROM drive
[17179577.404000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.420000] hda: max request size: 128KiB
[17179577.440000] hda: 78242976 sectors (40060 MB)
w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179577.440000] hda: cache flushes supported
[17179577.440000] hda: hda1 hda2 < hda5 >
[17179577.460000] hdc: ATAPI 52X DVD-ROM CD-R/RW
drive, 2048kB Cache, UDMA(33)
[17179577.460000] Uniform CD-ROM driver Revision: 3.20
[17179577.800000] usbcore: registered new driver usbfs
[17179577.800000] usbcore: registered new driver hub
[17179577.804000] USB Universal Host Controller
Interface driver v2.3
[17179577.804000] **** SET: Misaligned resource
pointer: ddef5502 Type 07 Len 0
[17179577.804000] ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 5
[17179577.804000] PCI: setting IRQ 5 as
level-triggered
[17179577.804000] ACPI: PCI Interrupt 0000:00:10.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179577.804000] uhci_hcd 0000:00:10.0: UHCI Host
Controller
[17179577.808000] uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 1
[17179577.808000] uhci_hcd 0000:00:10.0: irq 5, io
base 0x0000e400
[17179577.808000] hub 1-0:1.0: USB hub found
[17179577.808000] hub 1-0:1.0: 2 ports detected
[17179577.912000] **** SET: Misaligned resource
pointer: ddef5202 Type 07 Len 0
[17179577.912000] ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 11
[17179577.912000] PCI: setting IRQ 11 as
level-triggered
[17179577.912000] ACPI: PCI Interrupt 0000:00:10.1[B]
-> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179577.912000] uhci_hcd 0000:00:10.1: UHCI Host
Controller
[17179577.912000] uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 2
[17179577.912000] uhci_hcd 0000:00:10.1: irq 11, io
base 0x0000e800
[17179577.912000] hub 2-0:1.0: USB hub found
[17179577.912000] hub 2-0:1.0: 2 ports detected
[17179578.016000] **** SET: Misaligned resource
pointer: dc85cdc2 Type 07 Len 0
[17179578.016000] ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 11
[17179578.016000] ACPI: PCI Interrupt 0000:00:10.2[C]
-> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179578.016000] uhci_hcd 0000:00:10.2: UHCI Host
Controller
[17179578.016000] uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 3
[17179578.016000] uhci_hcd 0000:00:10.2: irq 11, io
base 0x0000ec00
[17179578.016000] hub 3-0:1.0: USB hub found
[17179578.016000] hub 3-0:1.0: 2 ports detected
[17179578.124000] **** SET: Misaligned resource
pointer: dc85cac2 Type 07 Len 0
[17179578.124000] ACPI: PCI Interrupt Link [LNKD]
enabled at IRQ 11
[17179578.124000] ACPI: PCI Interrupt 0000:00:10.3[D]
-> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179578.124000] ehci_hcd 0000:00:10.3: EHCI Host
Controller
[17179578.128000] ehci_hcd 0000:00:10.3: new USB bus
registered, assigned bus number 4
[17179578.128000] ehci_hcd 0000:00:10.3: irq 11, io
mem 0xdfffff00
[17179578.128000] ehci_hcd 0000:00:10.3: USB 2.0
started, EHCI 1.00, driver 10 Dec 2004
[17179578.128000] hub 4-0:1.0: USB hub found
[17179578.128000] hub 4-0:1.0: 6 ports detected
[17179578.380000] Attempting manual resume
[17179578.452000] EXT3-fs: mounted filesystem with
ordered data mode.
[17179578.476000] kjournald starting. Commit interval
5 seconds
[17179578.680000] hub 4-0:1.0: over-current change on
port 2
[17179591.840000] Linux agpgart interface v0.101 (c)
Dave Jones
[17179591.844000] agpgart: Detected VIA P4M266x/P4N266
chipset
[17179591.852000] agpgart: AGP aperture is 64M @
0xe0000000
[17179592.040000] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
[17179592.068000] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
[17179592.824000] Floppy drive(s): fd0 is 1.44M
[17179592.844000] FDC 0 is a post-1991 82077
[17179592.880000] ACPI: PCI Interrupt 0000:00:11.5[C]
-> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179592.880000] PCI: Setting latency timer of device
0000:00:11.5 to 64
[17179592.896000] Real Time Clock Driver v1.12
[17179592.920000] irda_init()
[17179592.920000] NET: Registered protocol family 23
[17179592.952000] parport: PnPBIOS parport detected.
[17179592.952000] parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE]
[17179592.964000] via-rhine.c:v1.10-LK1.2.0-2.6
June-10-2004 Written by Donald Becker
[17179593.352000] input: PC Speaker as
/class/input/input1
[17179593.424000] ACPI: PCI Interrupt 0000:00:12.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179593.428000] eth0: VIA Rhine II at 0x1dc00,
00:0a:e6:d7:70:f7, IRQ 5.
[17179593.432000] eth0: MII PHY found at address 1,
status 0x786d advertising 05e1 Link 45e1.
[17179593.464000] input: ImPS/2 Generic Wheel Mouse as
/class/input/input2
[17179593.536000] ts: Compaq touchscreen protocol
output
[17179594.504000] eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[17179594.712000] lp0: using parport0
(interrupt-driven).
[17179594.840000] Adding 1413680k swap on /dev/hda5.
Priority:-1 extents:1 across:1413680k
[17179595.028000] EXT3 FS on hda1, internal journal
[17179595.360000] md: md driver 0.90.3
MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179595.360000] md: bitmap version 4.39
[17179595.568000] NET: Registered protocol family 17
[17179596.080000] device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: <email address hidden>
[17179596.972000] cdrom: open failed.
[17179599.328000] NET: Registered protocol family 10
[17179599.328000] lo: Disabled Privacy Extensions
[17179599.328000] IPv6 over IPv4 tunneling driver
[17179605.808000] ACPI: Power Button (FF) [PWRF]
[17179605.808000] ACPI: Power Button (CM) [PWRB]
[17179605.808000] ACPI: Sleep Button (CM) [SLPB]
[17179606.004000] ibm_acpi: ec object not found
[17179606.056000] pcc_acpi: loading...
[17179609.528000] eth0: no IPv6 routers present
[17179617.588000] [drm] Initialized drm 1.0.1 20051102
[17179617.612000] ACPI: PCI Interrupt 0000:01:00.0[A]
-> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179617.612000] [drm] Initialized savage 2.4.1
20050313 on minor 0
[17179617.616000] mtrr: base(0xd2000000) is not
aligned on a size(0x5000000) boundary
[17179617.616000] agpgart: Found an AGP 2.0 compliant
device at 0000:00:00.0.
[17179617.616000] agpgart: Putting AGP V2 device at
0000:00:00.0 into 0x mode
[17179617.616000] agpgart: Putting AGP V2 device at
0000:01:00.0 into 0x mode
[17179619.244000] ppdev: user-space parallel port
driver
[17179619.764000] apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)
[17179619.764000] apm: overridden by ACPI.
[17179620.804000] Bluetooth: Core ver 2.8
[17179620.804000] NET: Registered protocol family 31
[17179620.804000] Bluetooth: HCI device and connection
manager initialized
[17179620.804000] Bluetooth: HCI socket layer
initialized
[17179620.844000] Bluetooth: L2CAP ver 2.8
[17179620.844000] Bluetooth: L2CAP socket layer
initialized
[17179620.904000] Bluetooth: RFCOMM socket layer
initialized
[17179620.904000] Bluetooth: RFCOMM TTY layer
initialized
[17179620.904000] Bluetooth: RFCOMM ver 1.7
[17179712.788000] usb 4-6: new high speed USB device
using ehci_hcd and address 2
[17179713.128000] SCSI subsystem initialized
[17179713.180000] Initializing USB Mass Storage
driver...
[17179713.184000] scsi0 : SCSI emulation for USB Mass
Storage devices
[17179713.184000] usb-storage: device found at 2
[17179713.184000] usb-storage: waiting for device to
settle before scanning
[17179713.184000] usbcore: registered new driver
usb-storage
[17179713.184000] USB Mass Storage support registered.
[17179718.184000] Vendor: Model: disgo
        Rev: 1.02
[17179718.184000] Type: Direct-Access
        ANSI SCSI revision: 00
[17179718.208000] usb-storage: device scan complete
[17179718.276000] Driver 'sd' needs updating - please
use bus_type methods
[17179718.708000] SCSI device sda: 1005568 512-byte
hdwr sectors (515 MB)
[17179718.708000] sda: Write Protect is off
[17179718.708000] sda: Mode Sense: 23 00 00 00
[17179718.708000] sda: assuming drive cache: write
through
[17179718.720000] SCSI device sda: 1005568 512-byte
hdwr sectors (515 MB)
[17179718.724000] sda: Write Protect is off
[17179718.724000] sda: Mode Sense: 23 00 00 00
[17179718.724000] sda: assuming drive cache: write
through
[17179718.724000] sda: sda1
[17179718.728000] sd 0:0:0:0: Attached scsi removable
disk sda
[17179718.748000] sd 0:0:0:0: Attached scsi generic
sg0 type 0
[17179719.644000] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case
sensitive!
john@john-desktop:~$

Thanks

John East

___________________________________________________________
What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship.
http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

Andrew Williams (nikdoof) said : #7

First issue is that one of your USB hosts is sharing the IRQ with your Network card:

uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e400
eth0: VIA Rhine II at 0x1dc00, 00:0a:e6:d7:70:f7, IRQ 5.

Looks like your network card could be causing a few issues, which in turn may interfer with the USB hosts operation. Is the network card a PCI card or built onto your motherboard?

John East (john-a-east) said : #8

Hi

Network card is built in to the motherboard. Using
noapic as a temporary boot option caused the usb stick
to work. Can't I use this as a permanent fix?

Thanks

John East
--- Andrew Williams <email address hidden>
wrote:

> Your support request #3425 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>
> Status: Open => Needs information
>
> Andrew Williams requested for more information:
> First issue is that one of your USB hosts is sharing
> the IRQ with your
> Network card:
>
> uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e400
> eth0: VIA Rhine II at 0x1dc00, 00:0a:e6:d7:70:f7,
> IRQ 5.
>
> Looks like your network card could be causing a few
> issues, which in
> turn may interfer with the USB hosts operation. Is
> the network card a
> PCI card or built onto your motherboard?
>
>
_______________________________________________________________________
> To answer this request for more information, you can
> either reply to
> this email or enter your reply at the following
> page:
> https://answers.launchpad.net/ubuntu/+ticket/3425
>

____________________________________________________

Yahoo! Photos is now offering a quality print service from just 7p a photo. http://uk.photos.yahoo.com

I have the same issue; using noapic causes the wireless card not to work

Best John East (john-a-east) said : #11

Using noapic as a boot option seems to have solved the problem on my machine. But - For anyones info, I am not using any wireless links at the moment, my router is wired.

Thanks everyone.

John East

john ziegler (zieglerjb3) said : #12

I used the rmmod and modprobe commands and now my usb dvd drive shows up in my dmesg but not in my drive list. How do I mount it?

John East (john-a-east) said : #13

HI

I am not sure,

My problem was relating to an old version of Ubuntu (6.06) a few years ago and it did not mount anything USB even an memory stick.  You don't say what version you are using but I have had no problems using modern versions.  In the case of the problem I had, it was a case of using NOAPIC as a boot option, then it worked.  I think it was related to the particular motherboard.  I am not an expert and the solution was suggested by someone else. (fhackenberger)

His reply to my original post is as follows

"I suspect that your ACPI bios reports something untrue concerning
interrupts to the linux kernel.

You could try the following:
Append noapic to your boot options as follows:
- Reboot and press ESC when the boot loader loads to show the boot menu. Press e on the default entry and append noapic to the line beginning with kernel.
- Boot and plug your usb stick in.
- execute dmesg and post the output again.
- Please also post the output of:
cat /proc/interrupts
before pluggin in the stick and after"

Hope this helps

Cheers

John East

On Sun, 12/9/10, john ziegler <email address hidden> wrote:

> From: john ziegler <email address hidden>
> Subject: Re: [Question #3425]: Re: [Question #3425]: Re: USB devices (memory stick etc) not recognised
> To: <email address hidden>
> Date: Sunday, 12 September, 2010, 1:02
> Your question #3425 on Ubuntu
> changed:
> https://answers.launchpad.net/ubuntu/+question/3425
>
> john ziegler posted a new comment:
> I used the rmmod and modprobe commands and now my usb dvd
> drive shows up
> in my dmesg but not in my drive list. How do I mount it?
>
> --
> You received this question notification because you are a
> direct
> subscriber of the question.
>