acpi non va su olidata tehom

Asked by klovis86

salve mi sono fatto già vivo nel forum di ubuntu italiano ma non sono riuscito a venirne a capo...
non riuscivo a fare partire la live sul mio portatile olidata tehom hm 1707 a meno di mettere le opzioni noapic nolapic e acpi=off.
alla fine, dato che non mi intendo di ricompilazione di kernel ho installato da windows l'ultima versione di wubi, disabilitando acpi,
ed è partita pur senza avere la possibilità di controllare stato batteria e processore... volevo sapere se era possibile riabilitare questi moduli, e se qualcuno magari ha una tabella dsdt già pronta allo scopo. di seguito elenco ciò che mi restituisce il comando lspci, sperando sia utile:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82566MC Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:02.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
04:02.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
04:02.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)

grazie in anticipo.

Question information

Language:
Italian Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
klovis86
Solved:
Last query:
Last reply:
Revision history for this message
klovis86 (klovis86) said :
#1

I forgot to ask the english audience :)
I'll be short: ubuntu won't load on my laptop unless i use the nolapic noapic acpi=off parameters at boot.
I'd like to reactivate those modules after the installation. I've installed ubuntu 8.04 beta with the wubi installer from windows...
my lspci output is written in the message above...if you need something else, just ask.
thanks in advance.

Revision history for this message
klovis86 (klovis86) said :
#2

ciao ragazzi, a quanto pare ho risolto.
acpi si disattivava per colpa dei driver legacy attivati da bios... basa disattivarli e tutto parte sia live che partizione. occhio a chi ha vista se vuole fare un dual boot meglio partizionare da vista stesso (ridurre volume) altrimenti si rischia di danneggiare la partizione (windows non ne vuole proprio sapere di condividere un po' il suo predominio -.-')

alla prossima anzi a tra poco mi sa perchè devo configurare la luminosità ed altre cose...

ciao

Klovis