Video Output stopped working on ATV1 CU2 build
After using ATV1 CU2 build, this month video output stopped working (TV now displays no source input found - TV is a Samsung UN65ES6500 65" Smart 3D LED HDTV 1080p). My ATV1 outputs to my Marantz Receiver via component video, and hdmi for audio. Marantz Receiver is wired to TV via component video. This setup has worked for 2 years...so I don't know what happened recently to cause this change. Please let me know if you have any ideas to try and fix this problem. Thanks in advance.
BIN DUMP after SSH'ing into the ATV:
atv@Crystalbunt
lspci: invalid option -- k
Usage: lspci [<switches>]
-v Be verbose
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-b Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>
-d [<vendor>
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read configuration data from given file
-G Enable PCI access debugging
Linux Crystalbuntu 2.6.24-28-generic #1 SMP Sat Oct 16 17:46:03 UTC 2010 i686 GNU/Linux
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~
Current Operating System: Linux Crystalbuntu 2.6.24-28-generic #1 SMP Sat Oct 16 17:46:03 UTC 2010 i686
Build Date: 06 May 2010 09:30:24PM
Before reporting problems, check http://
to make sure that you have the latest version.
Module Loader present
[sudo] password for atv:
Get: 1 http://
Get: 2 http://
Get: 3 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
99% [2 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Ign http://
65% [3 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Ign http://
Get: 4 http://
49% [4 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Ign http://
Ign http://
Ign http://
Ign http://
Get: 5 http://
39% [5 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Get: 6 http://
Ign http://
Ign http://
Ign http://
Ign http://
Get: 7 http://
42% [7 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Get: 8 http://
37% [8 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relebzip2: (stdin) is not a bzip2 file.
Hit http://
Ign http://
Err http://
404 Not Found [IP: 91.189.91.14 80]
Err http://
404 Not Found [IP: 91.189.91.14 80]
Err http://
404 Not Found [IP: 91.189.91.14 80]
Get: 9 http://
32% [Release gpgv 16006] [Waiting for headers] [Connecting to old-release.
Ign http://
Get: 10 http://
Err http://
404 Not Found [IP: 91.189.91.14 80]
29% [10 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relbzip2: (stdin) is not a bzip2 file.
Ign http://
Hit http://
Get: 11 http://
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Err http://
404 Not Found [IP: 91.189.91.15 80]
Get: 12 http://
32% [12 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relbzip2: (stdin) is not a bzip2 file.
Ign http://
Get: 13 http://
30% [13 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relbzip2: (stdin) is not a bzip2 file.
Ign http://
Hit http://
Hit http://
Get: 14 http://
28% [14 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relbzip2: (stdin) is not a bzip2 file.
Ign http://
Get: 15 http://
26% [15 Translation-en_GB bzip2 0] [Waiting for headers] [Connecting to old-relbzip2: (stdin) is not a bzip2 file.
Ign http://
Get: 16 http://
Ign http://
Hit http://
Hit http://
Get: 17 http://
Ign http://
Get: 18 http://
Ign http://
Get: 19 http://
35% [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 20 http://
38% [20 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 21 http://
41% [21 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 22 http://
44% [22 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 23 http://
46% [23 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 24 http://
49% [24 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 25 http://
51% [25 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 26 http://
53% [26 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 27 http://
54% [27 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 28 http://
56% [28 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 29 http://
58% [29 Packages bzip2 0] [Connecting to old-release.
Err http://
Sub-process bzip2 returned an error code (2)
Get: 30 http://
59% [30 Packages bzip2 0]bzip2: (stdin) is not a bzip2 file.
Err http://
Sub-process bzip2 returned an error code (2)
Fetched 30.5kB in 1s (17.5kB/s)
W: GPG error: http://
W: GPG error: http://
W: GPG error: http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
W: Failed to fetch http://
E: Some index files failed to download, they have been ignored, or old ones used instead.
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package hwinfo
Version: 1:7.3+10ubuntu10.2
Can't open display
-bash: fglrxinfo: command not found
nvidia-settings: error while loading shared libraries: libgtk-
lspci: invalid option -- k
Usage: lspci [<switches>]
-v Be verbose
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-b Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>
-d [<vendor>
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read configuration data from given file
-G Enable PCI access debugging
H/W path Device Class Description
=======
/0 bus Mac-F4228DC8
/0/0 processor Genuine Intel(R) processor
/0/0/1 memory 2MiB L2 cache
/0/0/3 memory 32KiB L1 cache
/0/2 memory 32KiB L1 cache
/0/4 memory 256MiB System Memory
/0/4/0 memory 256MiB DIMM Synchronous 400 MHz (2.5
/0/4/1 memory DIMM [empty]
/0/b memory 1MiB BIOS
/0/100 bridge Mobile 945GM/PM/GMS, 943/940GML and
/0/100/1 bridge Mobile 945GM/PM/GMS, 943/940GML and
/0/100/1/0 display G72M [Quadro NVS 110M/GeForce Go 730
/0/100/7 generic Intel Corporation
/0/100/1b multimedia 82801G (ICH7 Family) High Definition
/0/100/1c bridge 82801G (ICH7 Family) PCI Express Por
/0/100/1c/0 multimedia Broadcom Corporation
/0/100/1d bus 82801G (ICH7 Family) USB UHCI Contro
/0/100/1d.7 bus 82801G (ICH7 Family) USB2 EHCI Contr
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/3 eth0 network RTL-8139/
/0/100/1f bridge 82801GBM (ICH7-M) LPC Interface Brid
/0/100/1f.1 scsi0 storage 82801G (ICH7 Family) IDE Controller
/0/100/1f.1/0.0.0 /dev/sda disk 40GB FUJITSU MHW2040A
/0/100/1f.1/0.0.0/1 volume 19KiB EFI GPT partition
/0/100/1f.1/0.0.0/2 /dev/sda2 volume 34MiB Primary partition
/0/100/1f.1/0.0.0/3 /dev/sda3 volume 512MiB Linux swap volume
/0/100/1f.1/0.0.0/4 volume 35GiB EXT3 volume
/0/100/1f.3 bus 82801G (ICH7 Family) SMBus Controlle
*-display
description: VGA compatible controller
product: G72M [Quadro NVS 110M/GeForce Go 7300]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
sudo: hwinfo: command not found
ii libgl1-mesa-glx 7.0.3~rc2-1ubuntu3 A free implementation of the OpenGL API -- G
ii libglu1-mesa 7.0.3~rc2-1ubuntu3 The OpenGL utility library (GLU)
ii mesa-utils 7.0.3~rc2-1ubuntu3 Miscellaneous Mesa GL utilities
rc nvidia-
ii xserver-
ii xserver-
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
[ 39.584065] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 39.803898] PCI: Failed to allocate mem resource #6:20000@20000000 for 0000:01:00.0
[ 41.558658] fb0: VESA VGA frame buffer device
[ 45.540490] PM: Resume from disk failed.
[ 53.751698] intel_rng: FWH not detected
[ 55.391648] nvidia: module license 'NVIDIA' taints kernel.
[ 56.381349] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.33 Sat Mar 17 14:56:23 PDT 2012
model : 13
model name : Genuine Intel(R) processor 1.00GHz
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/
(WW) The directory "/usr/share/
(WW) The directory "/usr/share/
(WW) The directory "/usr/share/
(WW) The directory "/usr/share/
(WW) The directory "/usr/share/
(WW) The directory "/var/lib/
(WW) Open ACPI failed (/var/run/
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Module glx: vendor="NVIDIA Corporation"
(II) NVIDIA GLX Module 295.33 Sat Mar 17 15:18:29 PDT 2012
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA dlloader X Driver 295.33 Sat Mar 17 14:58:02 PDT 2012
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/
(II) Module wfb: vendor="X.Org Foundation"
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TVStandard" "HD720p"
(**) NVIDIA(0): Option "TVOutFormat" "COMPONENT"
(**) NVIDIA(0): Option "TVOverScan" "0.80"
(**) NVIDIA(0): Option "RegistryDwords" "RMDisableRende
(**) NVIDIA(0): Option "UseDisplayDevice" "TV"
(**) NVIDIA(0): Option "DynamicTwinView" "false"
(**) Aug 20 05:09:54 NVIDIA(0): Forcing COMPONENT output
(**) Aug 20 05:09:54 NVIDIA(0): TV Standard string: "HD720p"
(**) Aug 20 05:09:54 NVIDIA(0): Enabling 2D acceleration
(II) Aug 20 05:09:57 NVIDIA(0): NVIDIA GPU GeForce Go 7300 (G72) at PCI:1:0:0 (GPU-0)
(--) Aug 20 05:09:57 NVIDIA(0): Memory: 65536 kBytes
(--) Aug 20 05:09:57 NVIDIA(0): VideoBIOS: 05.72.22.68.00
(II) Aug 20 05:09:57 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Aug 20 05:09:57 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Aug 20 05:09:57 NVIDIA(0): Connected display device(s) on GeForce Go 7300 at PCI:1:0:0
(--) Aug 20 05:09:57 NVIDIA(0): none
(EE) Aug 20 05:09:57 NVIDIA(0): No display devices found for this X screen.
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
Manufacturer: Intel(R) Corporation
Serial Number: Not Specified
Manufacturer: 0x0000000000000000
Serial Number: 0x00000000
Manufacturer: Not Specified
Serial Number: Not Specified
Release Date: 09/25/07
Manufacturer: Apple Inc.
Product Name: AppleTV1,1
Serial Number: YM810138WH7
Manufacturer: Apple Inc.
Product Name: Mac-F4228DC8
Serial Number: 1
Manufacturer: Apple Computer, Inc.
Serial Number: YM810138WH7
Manufacturer: Unknown
Serial Number: Unknown
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "RegistryDwords" "RMDisableRende
Option "DynamicTwinView" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Option "UseDisplayDevice" "TV"
Option "TVOutFormat" "COMPONENT"
Option "TVStandard" "HD720p"
Option "TVOverScan" "0.80"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "True"
SubSection "Display"
Modes "1920x1080" "1280x720" "1024x768" "720x480" "800x600" "640x480"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
-bash: /usr/lib/
-bash: ubuntu-
Module Size Used by
acpi_cpufreq 10796 1
cpufreq_userspace 5284 0
cpufreq_stats 7104 0
cpufreq_powersave 2688 0
cpufreq_
cpufreq_ondemand 9740 0
freq_table 5536 3 acpi_cpufreq,
ipv6 268164 12
ac 6916 0
parport_pc 36260 0
lp 12324 0
parport 37832 2 parport_pc,lp
loop 18948 0
af_packet 23812 2
snd_hda_
snd_hda_
video 19856 0
output 4736 1 video
crystalhd 80392 0
nvidia 10942320 0
i2c_core 24832 1 nvidia
snd_hda_intel 32072 0
snd_hda_codec 72832 3 snd_hda_
button 9232 0
intel_agp 25492 0
snd_hwdep 10628 1 snd_hda_codec
snd_pcm 79876 2 snd_hda_
snd_timer 24964 1 snd_pcm
snd 61348 6 snd_hda_
soundcore 8800 1 snd
iTCO_wdt 13092 0
snd_page_alloc 12552 2 snd_hda_
evdev 13056 3
iTCO_vendor_support 4868 1 iTCO_wdt
pcspkr 4224 0
agpgart 34760 2 nvidia,intel_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
ext3 136840 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
usbhid 32128 0
hid 38784 1 usbhid
sd_mod 30720 3
ata_generic 8324 0
8139cp 24704 0
ata_piix 19588 2
pata_acpi 8320 0
libata 159728 3 ata_generic,
scsi_mod 151692 3 sg,sd_mod,libata
8139too 27648 0
ehci_hcd 37900 0
uhci_hcd 27024 0
mii 6400 2 8139cp,8139too
usbcore 146412 5 usbhid,
thermal 16796 0
processor 36616 3 acpi_cpufreq,
fan 5636 0
fuse 50708 1
vesafb 8964 1
fbcon 42912 70
tileblit 3584 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Can you help with this problem?
Provide an answer of your own, or ask Forchi for more information if necessary.
