For RTS5129 on Ubuntu 14.04 and kernel >= 3.16 I can't mount SD card

Asked by Jarosław Młynik

Dell Vostro 3360; Ubuntu 14.04.3 (upgraded from 14.04) with kernel 3.16 and 3.19 (work with 3.13 but there is no rtsx_usb)

uname -a
Linux sp 3.19.0-25-lowlatency #26~14.04.1-Ubuntu SMP PREEMPT Fri Jul 24 22:14:45 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

lsusb:

Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 0c45:648b Microdia Integrated Webcam
Bus 003 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 003: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod:

Module Size Used by
alx 36864 0
mdio 16384 1 alx
ctr 16384 3
ccm 20480 3
pci_stub 16384 1
vboxpci 24576 0
vboxnetadp 28672 0
vboxnetflt 28672 0
vboxdrv 434176 3 vboxnetadp,vboxnetflt,vboxpci
bnep 20480 2
rfcomm 69632 0
bluetooth 491520 10 bnep,rfcomm
binfmt_misc 20480 1
arc4 16384 2
iwldvm 237568 0
mac80211 724992 1 iwldvm
uvcvideo 90112 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_core 53248 1 uvcvideo
rtsx_usb_ms 20480 0
v4l2_common 16384 1 videobuf2_core
videodev 159744 3 uvcvideo,v4l2_common,videobuf2_core
memstick 20480 1 rtsx_usb_ms
media 24576 2 uvcvideo,videodev
snd_hda_codec_hdmi 53248 1
snd_hda_codec_cirrus 20480 1
snd_hda_codec_generic 69632 1 snd_hda_codec_cirrus
snd_hda_intel 32768 3
snd_hda_controller 32768 1 snd_hda_intel
snd_hda_codec 143360 5 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_cirrus
snd_hwdep 20480 1 snd_hda_codec
dell_wmi 16384 0
sparse_keymap 16384 1 dell_wmi
dell_laptop 16384 0
dcdbas 16384 1 dell_laptop
i8k 16384 0
intel_rapl 20480 0
iosf_mbi 16384 1 intel_rapl
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
x86_pkg_temp_thermal 16384 0
intel_powerclamp 20480 0
coretemp 16384 0
kvm_intel 151552 0
kvm 475136 1 kvm_intel
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
aesni_intel 172032 6
snd_seq_midi 16384 0
aes_x86_64 20480 1 aesni_intel
snd_seq_midi_event 16384 1 snd_seq_midi
lrw 16384 1 aesni_intel
gf128mul 16384 1 lrw
glue_helper 16384 1 aesni_intel
snd_rawmidi 32768 1 snd_seq_midi
ablk_helper 16384 1 aesni_intel
cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
iwlwifi 196608 1 iwldvm
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
joydev 20480 0
serio_raw 16384 0
i915 1044480 3
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
cfg80211 536576 3 iwlwifi,mac80211,iwldvm
lpc_ich 24576 0
drm_kms_helper 126976 1 i915
snd 86016 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus
drm 344064 5 i915,drm_kms_helper
mei_me 20480 0
shpchp 40960 0
soundcore 16384 2 snd,snd_hda_codec
mei 90112 1 mei_me
i2c_algo_bit 16384 1 i915
wmi 20480 1 dell_wmi
video 20480 1 i915
dell_smo8800 16384 0
mac_hid 16384 0
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,ppdev,parport_pc
rtsx_usb_sdmmc 28672 0
rtsx_usb 24576 2 rtsx_usb_sdmmc,rtsx_usb_ms
hid_generic 16384 0
usbhid 53248 0
hid 110592 3 hid_generic,usbhid
ahci 36864 2
psmouse 114688 0
libahci 32768 1 ahci

dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-25-lowlatency (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP PREEMPT Fri Jul 24 22:14:45 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-lowlatency 3.19.8-ckt2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-lowlatency root=UUID=efab43ac-ebca-4508-889b-cbaf77508116 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a83fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a83fb000-0x00000000a85fcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a85fd000-0x00000000b82a4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b82a5000-0x00000000baeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Dell System Vostro 3360/0VNGCY, BIOS A16 05/17/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 23F600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE
[ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE
[ 0.000000] BRK [0x01fcd000, 0x01fcdfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M
[ 0.000000] BRK [0x01fce000, 0x01fcefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f3fffff]
[ 0.000000] [mem 0x220000000-0x23f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fcf000, 0x01fcffff] PGTABLE
[ 0.000000] BRK [0x01fd0000, 0x01fd0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa83fafff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa81fffff] page 2M
[ 0.000000] [mem 0xa8200000-0xa83fafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa85fd000-0xb82a4fff]
[ 0.000000] [mem 0xa85fd000-0xa85fffff] page 4k
[ 0.000000] [mem 0xa8600000-0xb81fffff] page 2M
[ 0.000000] [mem 0xb8200000-0xb82a4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35a40000-0x36d17fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000BAFE2000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000BAFF0000 00A1F7 (v02 DELL IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BAF7C000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.000000] ACPI: BOOT 0x00000000BAFFC000 000028 (v01 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BAFFB000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000BAFEF000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000BAFEC000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000BAFEB000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000BAFEA000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000BAFE9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000BAFE8000 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFE7000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000BAFE6000 00003E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFE5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000BAFE4000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFE1000 00027E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DBG2 0x00000000BAFDF000 000070 (v00 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f5f2000-0x23f5f6fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa83fafff]
[ 0.000000] node 0: [mem 0xa85fd000-0xb82a4fff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f5fffff]
[ 0.000000] On node 0 totalpages: 2061375
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11707 pages used for memmap
[ 0.000000] DMA32 zone: 749219 pages, LIFO batch:31
[ 0.000000] Normal zone: 20440 pages used for memmap
[ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa83fb000-0xa85fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb82a5000-0xbaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f200000 s86720 r8192 d32064 u262144
[ 0.000000] pcpu-alloc: s86720 r8192 d32064 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2029143
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-lowlatency root=UUID=efab43ac-ebca-4508-889b-cbaf77508116 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8011500K/8245500K available (7937K kernel code, 1161K rwdata, 3752K rodata, 1388K init, 1292K bss, 234000K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1696.063 MHz processor
[ 0.000050] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.12 BogoMIPS (lpj=1696063)
[ 0.000053] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20141107
[ 0.010275] ACPI: All ACPI Tables successfully acquired
[ 0.010537] Security Framework initialized
[ 0.010559] AppArmor: AppArmor initialized
[ 0.010560] Yama: becoming mindful.
[ 0.011318] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014403] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015787] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015801] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016080] Initializing cgroup subsys memory
[ 0.016087] Initializing cgroup subsys devices
[ 0.016090] Initializing cgroup subsys freezer
[ 0.016093] Initializing cgroup subsys net_cls
[ 0.016096] Initializing cgroup subsys blkio
[ 0.016098] Initializing cgroup subsys perf_event
[ 0.016101] Initializing cgroup subsys net_prio
[ 0.016103] Initializing cgroup subsys hugetlb
[ 0.016137] CPU: Physical Processor ID: 0
[ 0.016139] CPU: Processor Core ID: 0
[ 0.016145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016714] mce: CPU supports 7 MCE banks
[ 0.016726] CPU0: Thermal monitoring handled by SMI
[ 0.016733] process: using mwait in idle threads
[ 0.016737] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.016737] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.016923] Freeing SMP alternatives memory: 28K (ffffffff81e7f000 - ffffffff81e86000)
[ 0.018260] ftrace: allocating 29996 entries in 118 pages
[ 0.038978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048987] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.048997] TSC deadline timer enabled
[ 0.049035] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.049064] ... version: 3
[ 0.049065] ... bit width: 48
[ 0.049066] ... generic registers: 4
[ 0.049068] ... value mask: 0000ffffffffffff
[ 0.049069] ... max period: 0000ffffffffffff
[ 0.049071] ... fixed-purpose events: 3
[ 0.049072] ... event mask: 000000070000000f
[ 0.057168] x86: Booting SMP configuration:
[ 0.057171] .... node #0, CPUs: #1
[ 0.068884] CPU1: Thermal monitoring handled by SMI
[ 0.071083] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.073110] #2
[ 0.084752] CPU2: Thermal monitoring handled by SMI
[ 0.088979] #3<7>[ 0.100611] CPU3: Thermal monitoring handled by SMI
[ 0.102735] x86: Booted up 1 node, 4 CPUs
[ 0.102739] smpboot: Total of 4 processors activated (13568.50 BogoMIPS)
[ 0.107321] devtmpfs: initialized
[ 0.111578] evm: security.selinux
[ 0.111580] evm: security.SMACK64
[ 0.111581] evm: security.SMACK64EXEC
[ 0.111582] evm: security.SMACK64TRANSMUTE
[ 0.111584] evm: security.SMACK64MMAP
[ 0.111585] evm: security.ima
[ 0.111586] evm: security.capability
[ 0.111661] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[ 0.111891] pinctrl core: initialized pinctrl subsystem
[ 0.112029] RTC time: 20:08:26, date: 08/06/15
[ 0.112188] NET: Registered protocol family 16
[ 0.115124] cpuidle: using governor ladder
[ 0.119131] cpuidle: using governor menu
[ 0.119227] ACPI: bus type PCI registered
[ 0.119230] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.119358] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.119362] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.119473] PCI: Using configuration type 1 for base access
[ 0.119798] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.119800] mtrr: probably your BIOS does not setup all CPUs.
[ 0.119801] mtrr: corrected configuration.
[ 0.125693] ACPI: Added _OSI(Module Device)
[ 0.125696] ACPI: Added _OSI(Processor Device)
[ 0.125698] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.125700] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129539] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.132377] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.132929] ACPI: Dynamic OEM Table Load:
[ 0.132944] ACPI: SSDT 0xFFFF880235456000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.133753] ACPI: Dynamic OEM Table Load:
[ 0.133764] ACPI: SSDT 0xFFFF88023553C400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.134462] ACPI: Dynamic OEM Table Load:
[ 0.134471] ACPI: SSDT 0xFFFF880235526C00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.137363] ACPI: Interpreter enabled
[ 0.137375] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.137381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.137402] ACPI: (supports S0 S3 S4 S5)
[ 0.137404] ACPI: Using IOAPIC for interrupt routing
[ 0.137448] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.145007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.145015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.145191] \_SB_.PCI0:_OSC invalid UUID
[ 0.145194] _OSC request data:1 1f 0
[ 0.145201] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.146078] PCI host bridge to bus 0000:00
[ 0.146082] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.146084] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.146087] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.146089] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.146092] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.146102] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.146228] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.146244] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.146254] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.146261] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.146407] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.146439] pci 0000:00:14.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit]
[ 0.146542] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.146583] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.146642] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.146674] pci 0000:00:16.0: reg 0x10: [mem 0xd0615000-0xd061500f 64bit]
[ 0.146779] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.146887] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.146915] pci 0000:00:1a.0: reg 0x10: [mem 0xd061a000-0xd061a3ff]
[ 0.147035] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.147097] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.147154] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.147190] pci 0000:00:1b.0: reg 0x10: [mem 0xd0610000-0xd0613fff 64bit]
[ 0.147296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.147393] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.147539] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.147591] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.147648] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.147761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.147807] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.147871] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.147898] pci 0000:00:1d.0: reg 0x10: [mem 0xd0619000-0xd06193ff]
[ 0.148018] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.148080] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.148134] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.148366] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.148397] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
[ 0.148408] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 0.148419] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
[ 0.148429] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 0.148443] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.148454] pci 0000:00:1f.2: reg 0x24: [mem 0xd0618000-0xd06187ff]
[ 0.148517] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.148604] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.148629] pci 0000:00:1f.3: reg 0x10: [mem 0xd0614000-0xd06140ff 64bit]
[ 0.148663] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.149079] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
[ 0.149420] pci 0000:01:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[ 0.150782] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.150982] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.153383] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.153395] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.153538] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
[ 0.153580] pci 0000:02:00.0: reg 0x10: [mem 0xd0400000-0xd043ffff 64bit]
[ 0.153599] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.153781] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153829] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.156278] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.156284] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.156290] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.157011] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.157079] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.157144] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.157208] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.157288] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.157354] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.157418] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.157482] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.157757] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.157841] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.157966] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.157968] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.157972] vgaarb: loaded
[ 0.157974] vgaarb: bridge control possible 0000:00:02.0
[ 0.158318] SCSI subsystem initialized
[ 0.158377] libata version 3.00 loaded.
[ 0.158412] ACPI: bus type USB registered
[ 0.158438] usbcore: registered new interface driver usbfs
[ 0.158449] usbcore: registered new interface driver hub
[ 0.158476] usbcore: registered new device driver usb
[ 0.158660] PCI: Using ACPI for IRQ routing
[ 0.160584] PCI: pci_cache_line_size set to 64 bytes
[ 0.160695] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.160697] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.160699] e820: reserve RAM buffer [mem 0xa83fb000-0xabffffff]
[ 0.160701] e820: reserve RAM buffer [mem 0xb82a5000-0xbbffffff]
[ 0.160703] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.160705] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[ 0.160864] NetLabel: Initializing
[ 0.160866] NetLabel: domain hash size = 128
[ 0.160867] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.160885] NetLabel: unlabeled traffic allowed by default
[ 0.160968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.160975] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.163040] Switched to clocksource hpet
[ 0.170522] AppArmor: AppArmor Filesystem Enabled
[ 0.170614] pnp: PnP ACPI init
[ 0.170772] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.170776] system 00:00: [io 0x1000-0x1003] has been reserved
[ 0.170778] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.170781] system 00:00: [io 0xffff] has been reserved
[ 0.170784] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.170786] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.170789] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.170791] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.170796] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170840] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.170905] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.170909] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.170960] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.171002] pnp 00:04: Plug and Play ACPI device, IDs DLL055c PNP0f13 (active)
[ 0.171187] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.171190] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.171192] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.171195] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.171198] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.171200] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.171203] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.171205] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.171208] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.171211] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.171213] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.171217] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171547] pnp: PnP ACPI: found 6 devices
[ 0.178573] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.178584] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.178598] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.178602] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.178609] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.178621] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.178624] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.178626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.178629] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.178631] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.178634] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.178636] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.178671] NET: Registered protocol family 2
[ 0.178914] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.179148] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.179297] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.179319] TCP: reno registered
[ 0.179334] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179375] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179457] NET: Registered protocol family 1
[ 0.179476] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.180078] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.180084] PCI: CLS 64 bytes, default 64
[ 0.180155] Trying to unpack rootfs image as initramfs...
[ 0.621423] Freeing initrd memory: 19296K (ffff880035a40000 - ffff880036d18000)
[ 0.621435] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.621438] software IO TLB [mem 0xb42a5000-0xb82a5000] (64MB) mapped at [ffff8800b42a5000-ffff8800b82a4fff]
[ 0.621487] Simple Boot Flag at 0x66 set to 0x1
[ 0.621701] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.621806] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 0.621815] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 0.621827] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 0.621836] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 0.621911] microcode: Microcode Update Driver: v2.00 <email address hidden>, Peter Oruba
[ 0.621946] Scanning for low memory corruption every 60 seconds
[ 0.622435] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.622462] Initialise system trusted keyring
[ 0.622493] audit: initializing netlink subsys (disabled)
[ 0.622510] audit: type=2000 audit(1438891706.603:1): initialized
[ 0.623010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.625016] zpool: loaded
[ 0.625021] zbud: loaded
[ 0.625272] VFS: Disk quotas dquot_6.5.2
[ 0.625322] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.625936] fuse init (API version 7.23)
[ 0.626126] Key type big_key registered
[ 0.626711] Key type asymmetric registered
[ 0.626718] Asymmetric key parser 'x509' registered
[ 0.626766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.626818] io scheduler noop registered
[ 0.626822] io scheduler deadline registered (default)
[ 0.626864] io scheduler cfq registered
[ 0.627306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.627327] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.627368] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.627369] vesafb: scrolling: redraw
[ 0.627371] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.630538] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
[ 0.630679] Console: switching to colour frame buffer device 170x48
[ 0.630703] fb0: VESA VGA frame buffer device
[ 0.630736] intel_idle: MWAIT substates: 0x21120
[ 0.630738] intel_idle: v0.4 model 0x3A
[ 0.630739] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.832399] ACPI: AC Adapter [ADP0] (off-line)
[ 0.832514] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.832519] ACPI: Power Button [PWRB]
[ 0.832568] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.832571] ACPI: Sleep Button [SLPB]
[ 0.832621] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.833140] ACPI: Lid Switch [LID0]
[ 0.833212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.833216] ACPI: Power Button [PWRF]
[ 0.834588] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.834592] ACPI: Thermal Zone [TZ00] (58 C)
[ 0.834889] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.834892] ACPI: Thermal Zone [TZ01] (58 C)
[ 0.834942] GHES: HEST is not enabled!
[ 0.835092] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.840287] Linux agpgart interface v0.103
[ 0.842144] brd: module loaded
[ 0.843101] loop: module loaded
[ 0.843426] libphy: Fixed MDIO Bus: probed
[ 0.843432] tun: Universal TUN/TAP device driver, 1.6
[ 0.843434] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.843508] PPP generic driver version 2.4.2
[ 0.843727] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.843736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.843840] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.844002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.844005] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844007] usb usb1: Product: xHCI Host Controller
[ 0.844009] usb usb1: Manufacturer: Linux 3.19.0-25-lowlatency xhci-hcd
[ 0.844011] usb usb1: SerialNumber: 0000:00:14.0
[ 0.844171] hub 1-0:1.0: USB hub found
[ 0.844186] hub 1-0:1.0: 4 ports detected
[ 0.844698] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.844704] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.844751] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.844754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844756] usb usb2: Product: xHCI Host Controller
[ 0.844758] usb usb2: Manufacturer: Linux 3.19.0-25-lowlatency xhci-hcd
[ 0.844760] usb usb2: SerialNumber: 0000:00:14.0
[ 0.844907] hub 2-0:1.0: USB hub found
[ 0.844919] hub 2-0:1.0: 4 ports detected
[ 0.845323] ACPI: Battery Slot [BAT0] (battery present)
[ 0.845338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.845344] ehci-pci: EHCI PCI platform driver
[ 0.845497] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.845507] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.845526] ehci-pci 0000:00:1a.0: debug port 2
[ 0.849439] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.849498] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd061a000
[ 0.855390] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.855450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.855453] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.855455] usb usb3: Product: EHCI Host Controller
[ 0.855458] usb usb3: Manufacturer: Linux 3.19.0-25-lowlatency ehci_hcd
[ 0.855460] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.855685] hub 3-0:1.0: USB hub found
[ 0.855698] hub 3-0:1.0: 2 ports detected
[ 0.855976] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.855985] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.856002] ehci-pci 0000:00:1d.0: debug port 2
[ 0.859910] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.860075] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0619000
[ 0.865455] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.865535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.865538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.865541] usb usb4: Product: EHCI Host Controller
[ 0.865543] usb usb4: Manufacturer: Linux 3.19.0-25-lowlatency ehci_hcd
[ 0.865545] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.865719] hub 4-0:1.0: USB hub found
[ 0.865727] hub 4-0:1.0: 2 ports detected
[ 0.865895] ehci-platform: EHCI generic platform driver
[ 0.865909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.865914] ohci-pci: OHCI PCI platform driver
[ 0.865927] ohci-platform: OHCI generic platform driver
[ 0.865937] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.866008] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.870173] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.870224] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.870391] mousedev: PS/2 mouse device common for all mice
[ 0.870683] rtc_cmos 00:01: RTC can wake from S4
[ 0.870841] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.870950] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.870976] i2c /dev entries driver
[ 0.871077] device-mapper: uevent: version 1.0.3
[ 0.871170] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: <email address hidden>
[ 0.871191] Intel P-state driver initializing.
[ 0.871434] Consider also installing thermald for improved thermal control.
[ 0.871441] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.871737] PCCT header not found.
[ 0.871738] ACPI PCC probe failed.
[ 0.871824] TCP: cubic registered
[ 0.871907] NET: Registered protocol family 10
[ 0.872178] NET: Registered protocol family 17
[ 0.872190] Key type dns_resolver registered
[ 0.872520] Loading compiled-in X.509 certificates
[ 0.873360] Loaded X.509 cert 'Magrathea: Glacier signing key: 0ec92ab379331c8ade44fe4b2ee42e106f9886dc'
[ 0.873388] registered taskstats version 1
[ 0.875116] Key type trusted registered
[ 0.877604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.878626] Key type encrypted registered
[ 0.878635] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.878639] ima: No TPM chip found, activating TPM-bypass!
[ 0.878700] evm: HMAC attrs: 0x1
[ 0.879359] Magic number: 11:648:143
[ 0.879411] block ram8: hash matches
[ 0.879471] acpi device:14: hash matches
[ 0.879578] rtc_cmos 00:01: setting system clock to 2015-08-06 20:08:27 UTC (1438891707)
[ 0.879740] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.879741] EDD information not available.
[ 0.879957] PM: Hibernation image not present or could not be loaded.
[ 0.880711] Freeing unused kernel memory: 1388K (ffffffff81d24000 - ffffffff81e7f000)
[ 0.880716] Write protecting the kernel read-only data: 12288k
[ 0.881210] Freeing unused kernel memory: 244K (ffff8800017c3000 - ffff880001800000)
[ 0.881476] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
[ 0.891481] systemd-udevd[131]: starting version 204
[ 1.117736] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [5c:f9:dd:40:5c:10]
[ 1.119091] ahci 0000:00:1f.2: version 3.0
[ 1.119258] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 1.119262] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.119911] scsi host0: ahci
[ 1.120045] scsi host1: ahci
[ 1.120168] scsi host2: ahci
[ 1.120283] scsi host3: ahci
[ 1.120391] scsi host4: ahci
[ 1.120520] scsi host5: ahci
[ 1.120571] ata1: SATA max UDMA/133 abar m2048@0xd0618000 port 0xd0618100 irq 25
[ 1.120572] ata2: DUMMY
[ 1.120573] ata3: DUMMY
[ 1.120574] ata4: DUMMY
[ 1.120575] ata5: DUMMY
[ 1.120576] ata6: DUMMY
[ 1.157597] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.167598] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.197611] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.272343] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.272346] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.272721] hub 3-1:1.0: USB hub found
[ 1.272908] hub 3-1:1.0: 6 ports detected
[ 1.282343] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.282346] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.282685] hub 4-1:1.0: USB hub found
[ 1.282744] hub 4-1:1.0: 8 ports detected
[ 1.364473] usb 1-3: New USB device found, idVendor=046d, idProduct=c52f
[ 1.364475] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.364477] usb 1-3: Product: USB Receiver
[ 1.364479] usb 1-3: Manufacturer: Logitech
[ 1.404748] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.408488] usbcore: registered new interface driver usbhid
[ 1.408491] usbhid: USB HID core driver
[ 1.409972] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input7
[ 1.410140] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 1.410784] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input8
[ 1.425748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.427070] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.427450] ata1.00: ATA-8: WDC WD5000LPVT-75G33T0, 01.01A01, max UDMA/133
[ 1.427453] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.428958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.429407] ata1.00: configured for UDMA/133
[ 1.429575] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVT-7 1A01 PQ: 0 ANSI: 5
[ 1.429825] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.429829] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.429847] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.429951] sd 0:0:0:0: [sda] Write Protect is off
[ 1.429955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.430040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.462006] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 1.507841] sda: sda1 sda2 < sda5 >
[ 1.508281] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.548973] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.623787] tsc: Refined TSC clocksource calibration: 1696.142 MHz
[ 1.636759] usb 3-1.1: New USB device found, idVendor=138a, idProduct=0011
[ 1.636762] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.636764] usb 3-1.1: SerialNumber: 42c611d56c05
[ 1.700035] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.786322] usb 3-1.3: New USB device found, idVendor=0bda, idProduct=0129
[ 1.786325] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.786326] usb 3-1.3: Product: USB2.0-CRW
[ 1.786328] usb 3-1.3: Manufacturer: Generic
[ 1.786329] usb 3-1.3: SerialNumber: 20100201396000000
[ 1.791370] usbcore: registered new interface driver rtsx_usb
[ 1.860076] usb 3-1.5: new high-speed USB device number 5 using ehci-pci
[ 2.017608] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=648b
[ 2.017618] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.017624] usb 3-1.5: Product: Laptop_Integrated_Webcam_E4HD
[ 2.017628] usb 3-1.5: Manufacturer: CNFB183F304010002G52
[ 2.064834] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.131706] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input9
[ 2.147729] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 2.167028] random: nonblocking pool is initialized
[ 2.624388] Switched to clocksource tsc
[ 3.966845] mmc0: error -22 whilst initialising SD card
[ 4.050807] init: plymouth-upstart-bridge main process (212) terminated with status 1
[ 4.050822] init: plymouth-upstart-bridge main process ended, respawning
[ 4.052611] init: plymouth-upstart-bridge main process (226) terminated with status 1
[ 4.052625] init: plymouth-upstart-bridge main process ended, respawning
[ 4.054047] init: plymouth-upstart-bridge main process (228) terminated with status 1
[ 4.054061] init: plymouth-upstart-bridge main process ended, respawning
[ 4.055767] init: plymouth-upstart-bridge main process (229) terminated with status 1
[ 4.055778] init: plymouth-upstart-bridge main process ended, respawning
[ 4.057139] init: plymouth-upstart-bridge main process (231) terminated with status 1
[ 4.057152] init: plymouth-upstart-bridge main process ended, respawning
[ 4.058793] init: plymouth-upstart-bridge main process (232) terminated with status 1
[ 4.058804] init: plymouth-upstart-bridge main process ended, respawning
[ 4.060278] init: plymouth-upstart-bridge main process (234) terminated with status 1
[ 4.060288] init: plymouth-upstart-bridge main process ended, respawning
[ 4.062067] init: plymouth-upstart-bridge main process (235) terminated with status 1
[ 4.062081] init: plymouth-upstart-bridge main process ended, respawning
[ 4.063630] init: plymouth-upstart-bridge main process (237) terminated with status 1
[ 4.063640] init: plymouth-upstart-bridge main process ended, respawning
[ 4.065185] init: plymouth-upstart-bridge main process (238) terminated with status 1
[ 4.065196] init: plymouth-upstart-bridge main process ended, respawning
[ 4.066679] init: plymouth-upstart-bridge main process (240) terminated with status 1
[ 4.066688] init: plymouth-upstart-bridge respawning too fast, stopped
[ 6.840013] mmc0: error -22 whilst initialising SD card
[ 9.788540] mmc0: error -22 whilst initialising SD card
[ 13.980678] Adding 8244220k swap on /dev/sda5. Priority:-1 extents:1 across:8244220k FS
[ 14.188888] systemd-udevd[340]: starting version 204
[ 14.372208] lp: driver loaded but no devices found
[ 14.378367] ppdev: user-space parallel port driver
[ 14.607931] wmi: Mapper loaded
[ 14.613152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.617818] [drm] Initialized drm 1.1.0 20060810
[ 14.625212] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 14.625221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.625226] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.625230] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.625232] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.625236] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.625238] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.625242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.625244] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.655664] cfg80211: Calling CRDA to update world regulatory domain
[ 14.664523] [drm] Memory usable by graphics device = 2048M
[ 14.664528] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[ 14.664530] fb: switching to inteldrmfb from VESA VGA
[ 14.665960] Console: switching to colour dummy device 80x25
[ 14.666043] [drm] Replacing VGA console driver
[ 14.675262] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 14.675265] Copyright(c) 2003- 2014 Intel Corporation
[ 14.675430] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 14.680772] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.680776] [drm] Driver supports precise vblank timestamp query.
[ 14.682781] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.698823] AVX version of gcm_enc/dec engaged.
[ 14.698827] AES CTR mode by8 optimization enabled
[ 14.707008] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.707242] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 14.709312] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 14.714184] fbcon: inteldrmfb (fb0) is primary device
[ 14.714216] Console: switching to colour frame buffer device 170x48
[ 14.714245] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.714248] i915 0000:00:02.0: registered panic notifier
[ 14.743158] intel_rapl: Found RAPL domain package
[ 14.743163] intel_rapl: Found RAPL domain core
[ 14.743165] intel_rapl: Found RAPL domain uncore
[ 14.756383] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.788852] input: Dell WMI hotkeys as /devices/virtual/input/input11
[ 14.890980] sound hdaudioC0D0: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 14.890984] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.890986] sound hdaudioC0D0: hp_outs=1 (0x4/0x0/0x0/0x0/0x0)
[ 14.890987] sound hdaudioC0D0: mono: mono_out=0x0
[ 14.890989] sound hdaudioC0D0: inputs:
[ 14.890991] sound hdaudioC0D0: Internal Mic=0x8
[ 14.890992] sound hdaudioC0D0: Mic=0x6
[ 14.897681] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.897780] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.897881] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 14.928428] audit: type=1400 audit(1438891721.541:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=459 comm="apparmor_parser"
[ 14.928434] audit: type=1400 audit(1438891721.541:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
[ 14.928438] audit: type=1400 audit(1438891721.541:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 14.928865] audit: type=1400 audit(1438891721.542:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
[ 14.928870] audit: type=1400 audit(1438891721.542:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 14.929085] audit: type=1400 audit(1438891721.542:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 14.930676] audit: type=1400 audit(1438891721.543:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[ 14.930683] audit: type=1400 audit(1438891721.543:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[ 14.930687] audit: type=1400 audit(1438891721.543:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[ 14.931077] audit: type=1400 audit(1438891721.544:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[ 14.935193] media: Linux media interface: v0.10
[ 14.941981] Linux video capture interface: v2.00
[ 14.949997] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:648b)
[ 14.976003] input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input15
[ 14.976068] usbcore: registered new interface driver uvcvideo
[ 14.976070] USB Video Class driver (1.1.1)
[ 14.997050] cfg80211: World regulatory domain updated:
[ 14.997054] cfg80211: DFS Master region: unset
[ 14.997055] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.997058] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 14.997059] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 14.997061] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 14.997062] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 14.997063] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 15.054471] iwlwifi 0000:01:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 15.069992] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 15.069995] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 15.069997] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 15.069998] iwlwifi 0000:01:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 15.070159] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 15.098753] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.241390] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 15.241407] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 17.527308] mmc0: error -22 whilst initialising SD card
[ 18.086603] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.581789] init: failsafe main process (778) killed by TERM signal
[ 19.384935] Bluetooth: Core ver 2.20
[ 19.384956] NET: Registered protocol family 31
[ 19.384958] Bluetooth: HCI device and connection manager initialized
[ 19.384963] Bluetooth: HCI socket layer initialized
[ 19.384966] Bluetooth: L2CAP socket layer initialized
[ 19.384973] Bluetooth: SCO socket layer initialized
[ 19.388692] Bluetooth: RFCOMM TTY layer initialized
[ 19.388699] Bluetooth: RFCOMM socket layer initialized
[ 19.388705] Bluetooth: RFCOMM ver 1.11
[ 19.941853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.941857] Bluetooth: BNEP filters: protocol multicast
[ 19.941861] Bluetooth: BNEP socket layer initialized
[ 20.009360] init: cups main process (899) killed by HUP signal
[ 20.009370] init: cups main process ended, respawning
[ 20.195273] mmc0: error -22 whilst initialising SD card
[ 21.395465] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 21.398493] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 21.492808] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 21.495899] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 21.520053] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.582368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.411157] init: samba-ad-dc main process (937) terminated with status 1
[ 22.529320] audit_printk_skb: 33 callbacks suppressed
[ 22.529324] audit: type=1400 audit(1438891729.139:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=987 comm="apparmor_parser"
[ 22.529331] audit: type=1400 audit(1438891729.139:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=987 comm="apparmor_parser"
[ 22.529335] audit: type=1400 audit(1438891729.139:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
[ 22.529726] audit: type=1400 audit(1438891729.139:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=987 comm="apparmor_parser"
[ 22.529730] audit: type=1400 audit(1438891729.139:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
[ 22.529936] audit: type=1400 audit(1438891729.139:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
[ 22.530331] audit: type=1400 audit(1438891729.140:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=986 comm="apparmor_parser"
[ 22.530340] audit: type=1400 audit(1438891729.140:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=986 comm="apparmor_parser"
[ 22.530693] audit: type=1400 audit(1438891729.140:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=986 comm="apparmor_parser"
[ 22.532798] audit: type=1400 audit(1438891729.142:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=991 comm="apparmor_parser"
[ 22.933237] mmc0: error -22 whilst initialising SD card
[ 23.790576] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.794012] vboxdrv: Found 4 processor cores
[ 23.810112] vboxdrv: TSC mode is Invariant, tentative frequency 1696137037 Hz
[ 23.810115] vboxdrv: Successfully loaded version 5.0.0 (interface 0x00230001)
[ 24.013412] VBoxNetFlt: Successfully started.
[ 24.014909] VBoxNetAdp: Successfully started.
[ 24.016521] VBoxPciLinuxInit
[ 24.018833] vboxpci: IOMMU not found (not registered)
[ 24.778310] wlan0: authenticate with d4:ca:6d:11:24:d6
[ 24.781196] wlan0: send auth to d4:ca:6d:11:24:d6 (try 1/3)
[ 24.783855] wlan0: authenticated
[ 24.784349] wlan0: associate with d4:ca:6d:11:24:d6 (try 1/3)
[ 24.787618] wlan0: RX AssocResp from d4:ca:6d:11:24:d6 (capab=0x431 status=0 aid=1)
[ 24.790540] wlan0: associated
[ 24.790561] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.673688] mmc0: error -22 whilst initialising SD card
[ 29.413609] mmc0: error -22 whilst initialising SD card
[ 32.098635] mmc0: error -22 whilst initialising SD card
[ 35.727781] mmc0: error -22 whilst initialising SD card
[ 38.418507] mmc0: error -22 whilst initialising SD card
[ 40.130408] mmc0: error -22 whilst initialising SD card
[ 42.107303] mmc0: error -22 whilst initialising SD card
[ 43.048730] mmc0: error -22 whilst initialising SD card
[ 43.961552] mmc0: error -22 whilst initialising SD card
[ 45.875408] mmc0: error -22 whilst initialising SD card
[....]

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Jarosław Młynik
Solved:
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said :
#1

If you boot with the SD card out and log in. When the OS has settled, shove the SD card in and run:

sudo fdisk -l; dmesg | tail

What is the output please?

Revision history for this message
Jarosław Młynik (jmlynik+ubuntu) said :
#2

I tested three cards: 1GB, 8GB and 16GB. The first works well but last two - not. The last works on 3.13.

Only three line like "mmc0: error -22 whilst initialising SD card" appear.

1GB:
root@s:~# fdisk -l ; dmesg | tail

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0007b276

   Device Boot Start End Blocks Id System
/dev/sda1 * 2048 960282623 480140288 83 Linux
/dev/sda2 960284670 976771071 8243201 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 960284672 976771071 8243200 82 Linux swap / Solaris

Disk /dev/mmcblk0: 988 MB, 988282880 bytes
4 heads, 16 sectors/track, 30160 cylinders, total 1930240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0009bf4f

        Device Boot Start End Blocks Id System
/dev/mmcblk0p1 8192 122879 57344 c W95 FAT32 (LBA)
/dev/mmcblk0p2 122880 6399999 3138560 83 Linux
[ 137.205251] mmc0: error -22 whilst initialising SD card
[ 140.104366] mmc0: error -22 whilst initialising SD card
[ 210.343139] mmc0: error -110 whilst initialising SD card
[ 214.068386] mmc0: error -110 whilst initialising SD card
[ 216.138667] mmc0: error -110 whilst initialising SD card
[ 317.259130] mmc0: new SD card at address aaaa
[ 317.259411] mmcblk0: mmc0:aaaa SU01G 942 MiB
[ 317.262381] mmcblk0: p1 p2
[ 317.262533] mmcblk0: p2 size 6277120 extends beyond EOD, truncated
[ 317.642161] EXT4-fs (mmcblk0p2): bad geometry: block count 784640 exceeds size of device (225920 blocks)
root@krzaczek:~#

8GB:
root@s:~# fdisk -l ; dmesg | tail

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0007b276

   Device Boot Start End Blocks Id System
/dev/sda1 * 2048 960282623 480140288 83 Linux
/dev/sda2 960284670 976771071 8243201 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 960284672 976771071 8243200 82 Linux swap / Solaris
[ 214.068386] mmc0: error -110 whilst initialising SD card
[ 216.138667] mmc0: error -110 whilst initialising SD card
[ 317.259130] mmc0: new SD card at address aaaa
[ 317.259411] mmcblk0: mmc0:aaaa SU01G 942 MiB
[ 317.262381] mmcblk0: p1 p2
[ 317.262533] mmcblk0: p2 size 6277120 extends beyond EOD, truncated
[ 317.642161] EXT4-fs (mmcblk0p2): bad geometry: block count 784640 exceeds size of device (225920 blocks)
[ 349.988792] mmc0: card aaaa removed
[ 360.228058] mmc0: error -22 whilst initialising SD card
[ 363.041773] mmc0: error -22 whilst initialising SD card

16GB:
root@s:~# fdisk -l ; dmesg | tail

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0007b276

   Device Boot Start End Blocks Id System
/dev/sda1 * 2048 960282623 480140288 83 Linux
/dev/sda2 960284670 976771071 8243201 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 960284672 976771071 8243200 82 Linux swap / Solaris
[ 317.262381] mmcblk0: p1 p2
[ 317.262533] mmcblk0: p2 size 6277120 extends beyond EOD, truncated
[ 317.642161] EXT4-fs (mmcblk0p2): bad geometry: block count 784640 exceeds size of device (225920 blocks)
[ 349.988792] mmc0: card aaaa removed
[ 360.228058] mmc0: error -22 whilst initialising SD card
[ 363.041773] mmc0: error -22 whilst initialising SD card
[ 365.943067] mmc0: error -22 whilst initialising SD card
[ 417.968633] mmc0: error -22 whilst initialising SD card
[ 420.792224] mmc0: error -22 whilst initialising SD card
[ 422.166205] mmc0: error -22 whilst initialising SD card

16GB on 3.13:
root@s:~# fdisk -l ; dmesg | tail

Disk /dev/sda: 500.1 GB, 500107862016 bytes
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 60801, w sumie sektorów: 976773168
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 4096
Rozmiar we/wy (minimalny/optymalny) w bajtach: 4096 / 4096
Identyfikator dysku: 0x0007b276

Urządzenie Rozruch Początek Koniec Bloków ID System
/dev/sda1 * 2048 960282623 480140288 83 Linux
/dev/sda2 960284670 976771071 8243201 5 Rozszerzona
Partycja 2 nie zaczyna się na granicy bloku fizycznego.
/dev/sda5 960284672 976771071 8243200 82 Linux swap / Solaris

Disk /dev/sdb: 15.8 GB, 15819866112 bytes
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 1923, w sumie sektorów: 30898176
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0x00000000

Urządzenie Rozruch Początek Koniec Bloków ID System
/dev/sdb1 8192 30898175 15444992 83 Linux
[ 46.507156] type=1400 audit(1438963211.072:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2189 comm="apparmor_parser"
[ 46.507562] type=1400 audit(1438963211.073:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2189 comm="apparmor_parser"
[ 48.713669] sd 6:0:0:0: [sdb] 30898176 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 48.713735] sd 6:0:0:0: [sdb] Cache data unavailable
[ 48.713739] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 48.841585] sd 6:0:0:0: [sdb] Cache data unavailable
[ 48.841590] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 48.842534] sdb: sdb1
[ 53.922939] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 54.134039] systemd-hostnamed[2245]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname

Revision history for this message
actionparsnip (andrew-woodhead666) said :
#3

Sounds like an unhealthy file system. I suggest you run a file system check on the device. Make sure it's healthy.

Revision history for this message
actionparsnip (andrew-woodhead666) said :
#4

sudo umount /dev/sdb1
sudo fsck /dev/sdb1

Revision history for this message
Jarosław Młynik (jmlynik+ubuntu) said :
#5

This is not related to filesystem. 8GB card works in 3.13 (and I made fsck on it) but in 3.19 doesn't work. In 3.19 /dev/sdb* dont't exist - rtsx_usb creates /dev/mmcblk0p1 and /dev/mmcblk0p2. But it doesn't work, there aren't these devices.

Revision history for this message
Andrew Symington (asymingt) said :
#6

I know it's not a perfect solution, but I have a temporary workaround:
https://github.com/asymingt/rts5139

Revision history for this message
Jarosław Młynik (jmlynik+ubuntu) said :
#7

Thanks, it's work.