Ubuntu

Hyper-threading cannot be enabled even with ht=on option

Asked by inkybutton on 2006-11-24

Hi,
I have a Pentium-4 1.6GHz processor, but I am not sure if Hyper-Threading is supported. But, according to the system log (/var/log/syslog), the Hyper-Threading function is supposed to exist (it says "localhost kernel: [17179569.480000] CPU: Hyper-Threading is disabled") so I downloaded the 2.6.15-27-686(SMP) kernel image. I also modified the GRUB boot menu file (/boot/grub/menu.lst) according to the instructions provided on a forum. (The modified line looks like this: # kopt=root=/dev/hda7 ro ht=on) I restarted GRUB, and rebooted. I didn't notice any performance gain, and in the system log, it still says "localhost kernel: [17179569.480000] CPU: Hyper-Threading is disabled"

I checked the BIOS setup. There doesn't seem to have an option to turn on or off Hyper-Threading.

Does this mean that the processor doesn't support HT, or is it Linux/Ubuntu (6.06)'s fault?

Thanks!

Question information

Language:: English Edit question

Status:: Answered

For:: Ubuntu Edit question

Assignee:: No assignee Edit question

Last query:: 2006-11-25

Last reply:: 2006-12-01

Link existing bug

Revision history for this message

Alan Pope 🍺🐧🐱 🦄 (popey) said on 2006-11-25:

#1

Can you type the following command and paste the output here:-

$ cat /proc/cpuinfo

If your CPU supports HT you should see two CPUs listed (processor 0 and processor 1, but the physical id will be the same) - for a dual core cpu you would see two cpus listed with different physical ids.

Revision history for this message

inkybutton (inkybutton) said on 2006-11-25:

#2

$cat /proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.60GHz
stepping : 2
cpu MHz : 1596.181
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflus h dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3196.41

I guess my processor doesn't support HT... but still why does it display "Hyper-threading disabled"? I get that even when I am using i386 kernel...

Revision history for this message

Alan Pope 🍺🐧🐱 🦄 (popey) said on 2006-11-25:

#3

Ahh, good news! Your CPU does support HT - note the "ht" at the end of the "flags" section?

You need to double check the BIOS for an HT setting, also enable ACPI (if there is an option for that) and make sure that you are using an SMP kernel. That should be all that's required.

Revision history for this message

inkybutton (inkybutton) said on 2006-11-25:

#4

Nope. In BIOS's menu, "Advanced BIOS configurations > CPU Features", only "Delay Prior to Thermal" and "Execute Disabled Bit" are offered. I am using an SMP kernel, and I am including /var/log/syslog (latest entry only). Thanks for helping! :)

Nov 26 12:33:40 localhost syslogd 1.4.1#17ubuntu7: restart.
Nov 26 12:33:41 localhost kernel: Inspecting /boot/System.map-2.6.15-27-686
Nov 26 12:33:41 localhost kernel: Loaded 23236 symbols from /boot/System.map-2.6.15-27-686.
Nov 26 12:33:41 localhost kernel: Symbols match kernel version 2.6.15.
Nov 26 12:33:41 localhost kernel: No module symbols loaded - kernel modules not enabled.
Nov 26 12:33:41 localhost kernel: [17179569.184000] Linux version 2.6.15-27-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-provided physical RAM map:
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000] 0MB HIGHMEM available.
Nov 26 12:33:41 localhost kernel: [17179569.184000] 511MB LOWMEM available.
Nov 26 12:33:41 localhost kernel: [17179569.184000] found SMP MP-table at 000f5180
Nov 26 12:33:41 localhost kernel: [17179569.184000] On node 0 totalpages: 131056
Nov 26 12:33:41 localhost kernel: [17179569.184000] DMA zone: 4096 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000] Normal zone: 126960 pages, LIFO batch:31
Nov 26 12:33:41 localhost kernel: [17179569.184000] HighMem zone: 0 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000] DMI 2.2 present.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: RSDP (v000 IntelR ) @ 0x000f6bb0
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7280
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x408
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: Local APIC address 0xfee00000
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Processor #0 15:1 APIC version 20
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 26 12:33:41 localhost kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ0 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ2 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ9 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 26 12:33:41 localhost kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Nov 26 12:33:41 localhost kernel: [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Built 1 zonelists
Nov 26 12:33:41 localhost kernel: [17179569.184000] Kernel command line: root=/dev/hda7 ro ht=on quiet splash
Nov 26 12:33:41 localhost kernel: [17179569.184000] mapped APIC to ffffd000 (fee00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Initializing CPU#0
Nov 26 12:33:41 localhost kernel: [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Detected 1596.247 MHz processor.
Nov 26 12:33:41 localhost kernel: [17179569.184000] Using pmtmr for high-res timesource
Nov 26 12:33:41 localhost kernel: [17179569.184000] Console: colour VGA+ 80x25
Nov 26 12:33:41 localhost kernel: [17179572.280000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 26 12:33:41 localhost kernel: [17179572.280000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 26 12:33:41 localhost kernel: [17179572.300000] Memory: 507624k/524224k available (2115k kernel code, 15980k reserved, 595k data, 332k init, 0k highmem)
Nov 26 12:33:41 localhost kernel: [17179572.300000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Calibrating delay using timer specific routine.. 3196.49 BogoMIPS (lpj=6392987)
Nov 26 12:33:41 localhost kernel: [17179572.380000] Security Framework v1.0.0 initialized
Nov 26 12:33:41 localhost kernel: [17179572.380000] SELinux: Disabled at boot.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Mount-cache hash table entries: 512
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: L2 cache: 256K
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: Hyper-Threading is disabled
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] mtrr: v2.0 (20020519)
Nov 26 12:33:41 localhost kernel: [17179572.380000] Enabling fast FPU save and restore... done.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Enabling unmasked SIMD FPU exception support... done.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Checking 'hlt' instruction... OK.
Nov 26 12:33:41 localhost kernel: [17179572.396000] SMP alternatives: switching to UP code
Nov 26 12:33:41 localhost kernel: [17179572.396000] checking if image is initramfs... it is
Nov 26 12:33:41 localhost kernel: [17179573.272000] Freeing initrd memory: 6818k freed
Nov 26 12:33:41 localhost kernel: [17179573.288000] ACPI: Looking for DSDT ... not found!
Nov 26 12:33:41 localhost kernel: [17179573.300000] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
Nov 26 12:33:41 localhost kernel: [17179573.300000] Total of 1 processors activated (3196.49 BogoMIPS).
Nov 26 12:33:41 localhost kernel: [17179573.300000] ENABLING IO-APIC IRQs
Nov 26 12:33:41 localhost kernel: [17179573.300000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 26 12:33:41 localhost kernel: [17179573.444000] Brought up 1 CPUs
Nov 26 12:33:41 localhost kernel: [17179573.444000] NET: Registered protocol family 16
Nov 26 12:33:41 localhost kernel: [17179573.444000] EISA bus registered
Nov 26 12:33:41 localhost kernel: [17179573.444000] ACPI: bus type pci registered
Nov 26 12:33:41 localhost kernel: [17179573.456000] PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=2
Nov 26 12:33:41 localhost kernel: [17179573.456000] PCI: Using configuration type 1
Nov 26 12:33:41 localhost kernel: [17179573.460000] ACPI: Subsystem revision 20051216
Nov 26 12:33:41 localhost kernel: [17179573.468000] ACPI: Interpreter enabled
Nov 26 12:33:41 localhost kernel: [17179573.468000] ACPI: Using IOAPIC for interrupt routing
Nov 26 12:33:41 localhost kernel: [17179573.472000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 26 12:33:41 localhost kernel: [17179573.472000] PCI: Probing PCI hardware (bus 00)
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Nov 26 12:33:41 localhost kernel: [17179573.476000] Boot video device is 0000:01:00.0
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI: Transparent bridge - 0000:00:1e.0
Nov 26 12:33:41 localhost kernel: [17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 26 12:33:41 localhost kernel: [17179573.492000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.504000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Nov 26 12:33:41 localhost kernel: [17179573.504000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.504000] Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 26 12:33:41 localhost kernel: [17179573.504000] pnp: PnP ACPI init
Nov 26 12:33:41 localhost kernel: [17179573.508000] pnp: PnP ACPI: found 12 devices
Nov 26 12:33:41 localhost kernel: [17179573.508000] PnPBIOS: Disabled by ACPI PNP
Nov 26 12:33:41 localhost kernel: [17179573.508000] PCI: Using ACPI for IRQ routing
Nov 26 12:33:41 localhost kernel: [17179573.508000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 26 12:33:41 localhost kernel: [17179573.536000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Bridge: 0000:00:01.0
Nov 26 12:33:41 localhost kernel: [17179573.536000] IO window: disabled.
Nov 26 12:33:41 localhost kernel: [17179573.536000] MEM window: f8000000-f9ffffff
Nov 26 12:33:41 localhost kernel: [17179573.536000] PREFETCH window: f0000000-f7ffffff
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Bridge: 0000:00:1e.0
Nov 26 12:33:41 localhost kernel: [17179573.536000] IO window: 9000-9fff
Nov 26 12:33:41 localhost kernel: [17179573.536000] MEM window: fa000000-fa0fffff
Nov 26 12:33:41 localhost kernel: [17179573.536000] PREFETCH window: disabled.
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Nov 26 12:33:41 localhost kernel: [17179573.536000] audit: initializing netlink socket (disabled)
Nov 26 12:33:41 localhost kernel: [17179573.536000] audit(1164544386.532:1): initialized
Nov 26 12:33:41 localhost kernel: [17179573.536000] VFS: Disk quotas dquot_6.5.1
Nov 26 12:33:41 localhost kernel: [17179573.536000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 26 12:33:41 localhost kernel: [17179573.536000] Initializing Cryptographic API
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler noop registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler anticipatory registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler deadline registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler cfq registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] isapnp: Scanning for PnP cards...
Nov 26 12:33:41 localhost kernel: [17179573.892000] isapnp: No Plug & Play device found
Nov 26 12:33:41 localhost kernel: [17179573.928000] Real Time Clock Driver v1.12
Nov 26 12:33:41 localhost kernel: [17179573.928000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 26 12:33:41 localhost kernel: [17179573.936000] serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 26 12:33:41 localhost kernel: [17179573.940000] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 26 12:33:41 localhost kernel: [17179573.940000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Nov 26 12:33:41 localhost kernel: [17179573.940000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 26 12:33:41 localhost kernel: [17179573.944000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 26 12:33:41 localhost kernel: [17179573.944000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179573.944000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
Nov 26 12:33:41 localhost kernel: [17179573.944000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Nov 26 12:33:41 localhost kernel: [17179573.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 26 12:33:41 localhost kernel: [17179573.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 26 12:33:41 localhost kernel: [17179573.944000] mice: PS/2 mouse device common for all mice
Nov 26 12:33:41 localhost kernel: [17179573.948000] EISA: Probing bus 0 at eisa.0
Nov 26 12:33:41 localhost kernel: [17179573.948000] EISA: Detected 0 cards.
Nov 26 12:33:41 localhost kernel: [17179573.948000] NET: Registered protocol family 2
Nov 26 12:33:41 localhost kernel: [17179573.992000] input: AT Translated Set 2 keyboard as /class/input/input0
Nov 26 12:33:41 localhost kernel: [17179574.004000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP: Hash tables configured (established 32768 bind 32768)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP reno registered
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP bic registered
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 1
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 8
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 20
Nov 26 12:33:41 localhost kernel: [17179574.004000] Using IPI No-Shortcut mode
Nov 26 12:33:41 localhost kernel: [17179574.004000] ACPI wakeup devices:
Nov 26 12:33:41 localhost kernel: [17179574.004000] SLPB PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
Nov 26 12:33:41 localhost kernel: [17179574.004000] ACPI: (supports S0 S3 S4 S5)
Nov 26 12:33:41 localhost kernel: [17179574.004000] Freeing unused kernel memory: 332k freed
Nov 26 12:33:41 localhost kernel: [17179574.092000] vga16fb: initializing
Nov 26 12:33:41 localhost kernel: [17179574.092000] vga16fb: mapped to 0xc00a0000
Nov 26 12:33:41 localhost kernel: [17179574.240000] Console: switching to colour frame buffer device 80x25
Nov 26 12:33:41 localhost kernel: [17179574.240000] fb0: VGA16 VGA frame buffer device
Nov 26 12:33:41 localhost kernel: [17179575.392000] Capability LSM initialized
Nov 26 12:33:41 localhost kernel: [17179575.452000] ACPI: Fan [FAN] (on)
Nov 26 12:33:41 localhost kernel: [17179575.464000] ACPI: Thermal Zone [THRM] (38 C)
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: IDE controller at PCI slot 0000:00:1f.1
Nov 26 12:33:41 localhost kernel: [17179576.632000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: chipset revision 2
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: not 100%% native mode: will probe irqs later
Nov 26 12:33:41 localhost kernel: [17179576.632000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
Nov 26 12:33:41 localhost kernel: [17179576.632000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Nov 26 12:33:41 localhost kernel: [17179576.632000] Probing IDE interface ide0...
Nov 26 12:33:41 localhost kernel: [17179576.924000] hda: ST340014A, ATA DISK drive
Nov 26 12:33:41 localhost kernel: [17179577.600000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 26 12:33:41 localhost kernel: [17179577.604000] Probing IDE interface ide1...
Nov 26 12:33:41 localhost kernel: [17179578.344000] hdc: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
Nov 26 12:33:41 localhost kernel: [17179579.020000] ide1 at 0x170-0x177,0x376 on irq 15
Nov 26 12:33:41 localhost kernel: [17179579.032000] hda: max request size: 1024KiB
Nov 26 12:33:41 localhost kernel: [17179579.044000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 26 12:33:41 localhost kernel: [17179579.048000] hda: cache flushes supported
Nov 26 12:33:41 localhost kernel: [17179579.048000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3
Nov 26 12:33:41 localhost kernel: [17179579.164000] hdc: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 26 12:33:41 localhost kernel: [17179579.164000] Uniform CD-ROM driver Revision: 3.20
Nov 26 12:33:41 localhost kernel: [17179579.784000] usbcore: registered new driver usbfs
Nov 26 12:33:41 localhost kernel: [17179579.788000] usbcore: registered new driver hub
Nov 26 12:33:41 localhost kernel: [17179579.788000] USB Universal Host Controller Interface driver v2.3
Nov 26 12:33:41 localhost kernel: [17179579.792000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179579.792000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000ac00
Nov 26 12:33:41 localhost kernel: [17179579.796000] hub 1-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179579.796000] hub 1-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179579.904000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
Nov 26 12:33:41 localhost kernel: [17179579.904000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000a000
Nov 26 12:33:41 localhost kernel: [17179579.904000] hub 2-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179579.904000] hub 2-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.012000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179580.012000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000a400
Nov 26 12:33:41 localhost kernel: [17179580.012000] hub 3-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.012000] hub 3-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.120000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179580.120000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000a800
Nov 26 12:33:41 localhost kernel: [17179580.120000] hub 4-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.120000] hub 4-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.232000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
Nov 26 12:33:41 localhost kernel: [17179580.232000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.232000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfa100000
Nov 26 12:33:41 localhost kernel: [17179580.236000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 26 12:33:41 localhost kernel: [17179580.236000] hub 5-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.236000] hub 5-0:1.0: 8 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.252000] usb 2-1: new full speed USB device using uhci_hcd and address 2
Nov 26 12:33:41 localhost kernel: [17179580.528000] Attempting manual resume
Nov 26 12:33:41 localhost kernel: [17179580.540000] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179580.824000] ReiserFS: hda7: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179580.836000] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179580.836000] ReiserFS: hda7: checking transaction log (hda7)
Nov 26 12:33:41 localhost kernel: [17179580.864000] ReiserFS: hda7: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179581.060000] usb 2-1: new full speed USB device using uhci_hcd and address 3
Nov 26 12:33:41 localhost kernel: [17179581.448000] usb 2-2: new full speed USB device using uhci_hcd and address 4
Nov 26 12:33:41 localhost kernel: [17179593.976000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 26 12:33:41 localhost kernel: [17179593.988000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 26 12:33:41 localhost kernel: [17179594.012000] Linux agpgart interface v0.101 (c) Dave Jones
Nov 26 12:33:41 localhost kernel: [17179594.028000] agpgart: Detected an Intel 865 Chipset.
Nov 26 12:33:41 localhost kernel: [17179594.036000] agpgart: AGP aperture is 128M @ 0xe8000000
Nov 26 12:33:41 localhost kernel: [17179594.124000] hw_random: RNG not detected
Nov 26 12:33:41 localhost kernel: [17179594.248000] input: PC Speaker as /class/input/input1
Nov 26 12:33:41 localhost kernel: [17179594.300000] FDC 0 is a post-1991 82077
Nov 26 12:33:41 localhost kernel: [17179594.944000] nvidia: module license 'NVIDIA' taints kernel.
Nov 26 12:33:41 localhost kernel: [17179594.960000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179594.960000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
Nov 26 12:33:41 localhost kernel: [17179595.116000] parport: PnPBIOS parport detected.
Nov 26 12:33:41 localhost kernel: [17179595.116000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: Try the "8139too" driver instead.
Nov 26 12:33:41 localhost kernel: [17179595.508000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
Nov 26 12:33:41 localhost kernel: [17179595.508000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
Nov 26 12:33:41 localhost kernel: [17179595.536000] 8139too Fast Ethernet driver 0.9.27
Nov 26 12:33:41 localhost kernel: [17179595.564000] drivers/usb/net/atmel/at76_usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta23-fw_dwl loading
Nov 26 12:33:41 localhost kernel: [17179595.644000] drivers/usb/net/atmel/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta23-fw_dwl
Nov 26 12:33:41 localhost kernel: [17179595.648000] drivers/usb/net/atmel/at76c503-fw_skel.c: Atmel at76c505 (RFMD 2958) Wireless LAN Driver v0.12beta23-fw_dwl loading
Nov 26 12:33:41 localhost kernel: [17179595.648000] drivers/usb/net/atmel/at76c503-fw_skel.c: downloading firmware atmel_at76c505-rfmd2958.bin
Nov 26 12:33:41 localhost kernel: [17179595.708000] Linux video capture interface: v1.00
Nov 26 12:33:41 localhost kernel: [17179595.820000] drivers/usb/net/atmel/at76c503-fw_skel.c: got it.
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: $Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp $ compiled Sep 16 2006 02:26:50
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: firmware version 1.101.0 #86 (fcs_len 4)
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: device's MAC 00:40:f4:ab:1e:f4, regulatory domain FCC (U.S) (id 16)
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: registered wlan0
Nov 26 12:33:41 localhost kernel: [17179595.824000] usbcore: registered new driver at76c505-rfmd2958
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
Nov 26 12:33:41 localhost kernel: [17179595.828000] intel8x0_measure_ac97_clock: measured 58393 usecs
Nov 26 12:33:41 localhost kernel: [17179595.828000] intel8x0: clocking to 48000
Nov 26 12:33:41 localhost kernel: [17179595.840000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 209
Nov 26 12:33:41 localhost kernel: [17179595.840000] eth0: RealTek RTL8139 at 0xe08d4000, 00:14:2a:0c:6f:64, IRQ 209
Nov 26 12:33:41 localhost kernel: [17179595.840000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Nov 26 12:33:41 localhost kernel: [17179595.916000] usbcore: registered new driver spca5xx
Nov 26 12:33:41 localhost kernel: [17179595.916000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
Nov 26 12:33:41 localhost kernel: [17179596.252000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Nov 26 12:33:41 localhost kernel: [17179596.372000] ts: Compaq touchscreen protocol output
Nov 26 12:33:41 localhost kernel: [17179596.568000] lp0: using parport0 (interrupt-driven).
Nov 26 12:33:41 localhost kernel: [17179596.680000] Adding 514040k swap on /dev/hda8. Priority:-1 extents:1 across:514040k
Nov 26 12:33:41 localhost kernel: [17179596.712000] Adding 2048248k swap on /dev/hda1. Priority:-2 extents:1 across:2048248k
Nov 26 12:33:41 localhost kernel: [17179597.980000] NET: Registered protocol family 17
Nov 26 12:33:41 localhost kernel: [17179600.672000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 26 12:33:41 localhost kernel: [17179600.672000] md: bitmap version 4.39
Nov 26 12:33:41 localhost kernel: [17179600.948000] NET: Registered protocol family 10
Nov 26 12:33:41 localhost kernel: [17179600.948000] lo: Disabled Privacy Extensions
Nov 26 12:33:41 localhost kernel: [17179600.948000] IPv6 over IPv4 tunneling driver
Nov 26 12:33:41 localhost kernel: [17179605.304000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
Nov 26 12:33:41 localhost kernel: [17179607.172000] ReiserFS: hda9: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179607.412000] ReiserFS: hda9: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179607.432000] ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179607.432000] ReiserFS: hda9: checking transaction log (hda9)
Nov 26 12:33:41 localhost kernel: [17179607.480000] ReiserFS: hda9: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179607.532000] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179608.072000] ReiserFS: hda3: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179608.084000] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179608.088000] ReiserFS: hda3: checking transaction log (hda3)
Nov 26 12:33:41 localhost kernel: [17179608.108000] ReiserFS: hda3: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179608.224000] NTFS driver 2.1.25 [Flags: R/O MODULE].
Nov 26 12:33:41 localhost kernel: [17179608.312000] NTFS volume version 3.1.
Nov 26 12:33:41 localhost kernel: [17179608.360000] NTFS volume version 3.1.
Nov 26 12:33:41 localhost kernel: [17179609.940000] pcc_acpi: loading...
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Power Button (FF) [PWRF]
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Power Button (CM) [PWRB]
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Sleep Button (CM) [SLPB]
Nov 26 12:33:41 localhost kernel: [17179610.064000] ibm_acpi: ec object not found
Nov 26 12:33:41 localhost kernel: [17179611.740000] wlan0: no IPv6 routers present
Nov 26 12:33:44 localhost kernel: [17179614.672000] ppdev: user-space parallel port driver
Nov 26 12:33:45 localhost kernel: [17179616.044000] wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
Nov 26 12:33:51 localhost dhcdbd: Started up.
Nov 26 12:33:51 localhost kernel: [17179622.024000] ip_tables: (C) 2000-2002 Netfilter core team
Nov 26 12:33:51 localhost kernel: [17179622.140000] Netfilter messages via NETLINK v0.30.
Nov 26 12:33:51 localhost kernel: [17179622.172000] ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Device is in legacy mode, falling back to 2.x
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Device is in legacy mode, falling back to 2.x
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Nov 26 12:33:54 localhost ntpd[4765]: ntpd 4.2.0a@1:4.2.0a+stable-8-r Mon May 29 02:48:41 UTC 2006 (1)
Nov 26 12:33:54 localhost ntpd[4765]: precision = 3.000 usec
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wildcard, 0.0.0.0#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wildcard, ::#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface lo, 127.0.0.1#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wlan0, 192.168.1.4#123
Nov 26 12:33:54 localhost ntpd[4765]: kernel time sync status 0040
Nov 26 12:33:55 localhost ntpd[4765]: frequency initialized 0.000 PPM from /var/lib/ntp/ntp.drift
Nov 26 12:33:55 localhost /usr/sbin/cron[4797]: (CRON) INFO (pidfile fd = 3)
Nov 26 12:33:55 localhost /usr/sbin/cron[4798]: (CRON) STARTUP (fork ok)
Nov 26 12:33:55 localhost /usr/sbin/cron[4798]: (CRON) INFO (Running @reboot jobs)
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): starting (version 2.14.0), pid 4962 user 'inkybutton'
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readwrite:/home/inkybutton/.gconf" to a writable configuration source at position 1
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Nov 26 12:34:10 localhost gconfd (inkybutton-4962): Resolved address "xml:readwrite:/home/inkybutton/.gconf" to a writable configuration source at position 0

Nope. In BIOS's menu, "Advanced BIOS configurations > CPU Features", only "Delay Prior to Thermal" and "Execute Disabled Bit" are offered. I am using an SMP kernel, and I am including /var/log/syslog (latest entry only). Thanks for helping! :)

Nov 26 12:33:40 localhost syslogd 1.4.1#17ubuntu7: restart.
Nov 26 12:33:41 localhost kernel: Inspecting /boot/System.map-2.6.15-27-686
Nov 26 12:33:41 localhost kernel: Loaded 23236 symbols from /boot/System.map-2.6.15-27-686.
Nov 26 12:33:41 localhost kernel: Symbols match kernel version 2.6.15.
Nov 26 12:33:41 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Nov 26 12:33:41 localhost kernel: [17179569.184000] Linux version 2.6.15-27-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006
Nov 26 12:33:41 localhost kernel: [17179569.184000] BIOS-provided physical RAM map:
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Nov 26 12:33:41 localhost kernel: [17179569.184000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Nov 26 12:33:41 localhost kernel: [17179569.184000] 0MB HIGHMEM available.
Nov 26 12:33:41 localhost kernel: [17179569.184000] 511MB LOWMEM available.
Nov 26 12:33:41 localhost kernel: [17179569.184000] found SMP MP-table at 000f5180
Nov 26 12:33:41 localhost kernel: [17179569.184000] On node 0 totalpages: 131056
Nov 26 12:33:41 localhost kernel: [17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000]   Normal zone: 126960 pages, LIFO batch:31
Nov 26 12:33:41 localhost kernel: [17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
Nov 26 12:33:41 localhost kernel: [17179569.184000] DMI 2.2 present.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: RSDP (v000 IntelR                                ) @ 0x000f6bb0
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7280
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x408
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: Local APIC address 0xfee00000
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Processor #0 15:1 APIC version 20
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 26 12:33:41 localhost kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ0 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ2 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] ACPI: IRQ9 used by override.
Nov 26 12:33:41 localhost kernel: [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Nov 26 12:33:41 localhost kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Nov 26 12:33:41 localhost kernel: [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Built 1 zonelists
Nov 26 12:33:41 localhost kernel: [17179569.184000] Kernel command line: root=/dev/hda7 ro ht=on quiet splash
Nov 26 12:33:41 localhost kernel: [17179569.184000] mapped APIC to ffffd000 (fee00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Initializing CPU#0
Nov 26 12:33:41 localhost kernel: [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
Nov 26 12:33:41 localhost kernel: [17179569.184000] Detected 1596.247 MHz processor.
Nov 26 12:33:41 localhost kernel: [17179569.184000] Using pmtmr for high-res timesource
Nov 26 12:33:41 localhost kernel: [17179569.184000] Console: colour VGA+ 80x25
Nov 26 12:33:41 localhost kernel: [17179572.280000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 26 12:33:41 localhost kernel: [17179572.280000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 26 12:33:41 localhost kernel: [17179572.300000] Memory: 507624k/524224k available (2115k kernel code, 15980k reserved, 595k data, 332k init, 0k highmem)
Nov 26 12:33:41 localhost kernel: [17179572.300000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Calibrating delay using timer specific routine.. 3196.49 BogoMIPS (lpj=6392987)
Nov 26 12:33:41 localhost kernel: [17179572.380000] Security Framework v1.0.0 initialized
Nov 26 12:33:41 localhost kernel: [17179572.380000] SELinux:  Disabled at boot.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Mount-cache hash table entries: 512
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: L2 cache: 256K
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: Hyper-Threading is disabled
Nov 26 12:33:41 localhost kernel: [17179572.380000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Nov 26 12:33:41 localhost kernel: [17179572.380000] mtrr: v2.0 (20020519)
Nov 26 12:33:41 localhost kernel: [17179572.380000] Enabling fast FPU save and restore... done.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Enabling unmasked SIMD FPU exception support... done.
Nov 26 12:33:41 localhost kernel: [17179572.380000] Checking 'hlt' instruction... OK.
Nov 26 12:33:41 localhost kernel: [17179572.396000] SMP alternatives: switching to UP code
Nov 26 12:33:41 localhost kernel: [17179572.396000] checking if image is initramfs... it is
Nov 26 12:33:41 localhost kernel: [17179573.272000] Freeing initrd memory: 6818k freed
Nov 26 12:33:41 localhost kernel: [17179573.288000] ACPI: Looking for DSDT ... not found!
Nov 26 12:33:41 localhost kernel: [17179573.300000] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
Nov 26 12:33:41 localhost kernel: [17179573.300000] Total of 1 processors activated (3196.49 BogoMIPS).
Nov 26 12:33:41 localhost kernel: [17179573.300000] ENABLING IO-APIC IRQs
Nov 26 12:33:41 localhost kernel: [17179573.300000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 26 12:33:41 localhost kernel: [17179573.444000] Brought up 1 CPUs
Nov 26 12:33:41 localhost kernel: [17179573.444000] NET: Registered protocol family 16
Nov 26 12:33:41 localhost kernel: [17179573.444000] EISA bus registered
Nov 26 12:33:41 localhost kernel: [17179573.444000] ACPI: bus type pci registered
Nov 26 12:33:41 localhost kernel: [17179573.456000] PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=2
Nov 26 12:33:41 localhost kernel: [17179573.456000] PCI: Using configuration type 1
Nov 26 12:33:41 localhost kernel: [17179573.460000] ACPI: Subsystem revision 20051216
Nov 26 12:33:41 localhost kernel: [17179573.468000] ACPI: Interpreter enabled
Nov 26 12:33:41 localhost kernel: [17179573.468000] ACPI: Using IOAPIC for interrupt routing
Nov 26 12:33:41 localhost kernel: [17179573.472000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 26 12:33:41 localhost kernel: [17179573.472000] PCI: Probing PCI hardware (bus 00)
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Nov 26 12:33:41 localhost kernel: [17179573.476000] Boot video device is 0000:01:00.0
Nov 26 12:33:41 localhost kernel: [17179573.476000] PCI: Transparent bridge - 0000:00:1e.0
Nov 26 12:33:41 localhost kernel: [17179573.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 26 12:33:41 localhost kernel: [17179573.492000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Nov 26 12:33:41 localhost kernel: [17179573.500000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.504000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Nov 26 12:33:41 localhost kernel: [17179573.504000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Nov 26 12:33:41 localhost kernel: [17179573.504000] Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 26 12:33:41 localhost kernel: [17179573.504000] pnp: PnP ACPI init
Nov 26 12:33:41 localhost kernel: [17179573.508000] pnp: PnP ACPI: found 12 devices
Nov 26 12:33:41 localhost kernel: [17179573.508000] PnPBIOS: Disabled by ACPI PNP
Nov 26 12:33:41 localhost kernel: [17179573.508000] PCI: Using ACPI for IRQ routing
Nov 26 12:33:41 localhost kernel: [17179573.508000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov 26 12:33:41 localhost kernel: [17179573.536000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Bridge: 0000:00:01.0
Nov 26 12:33:41 localhost kernel: [17179573.536000]   IO window: disabled.
Nov 26 12:33:41 localhost kernel: [17179573.536000]   MEM window: f8000000-f9ffffff
Nov 26 12:33:41 localhost kernel: [17179573.536000]   PREFETCH window: f0000000-f7ffffff
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Bridge: 0000:00:1e.0
Nov 26 12:33:41 localhost kernel: [17179573.536000]   IO window: 9000-9fff
Nov 26 12:33:41 localhost kernel: [17179573.536000]   MEM window: fa000000-fa0fffff
Nov 26 12:33:41 localhost kernel: [17179573.536000]   PREFETCH window: disabled.
Nov 26 12:33:41 localhost kernel: [17179573.536000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Nov 26 12:33:41 localhost kernel: [17179573.536000] audit: initializing netlink socket (disabled)
Nov 26 12:33:41 localhost kernel: [17179573.536000] audit(1164544386.532:1): initialized
Nov 26 12:33:41 localhost kernel: [17179573.536000] VFS: Disk quotas dquot_6.5.1
Nov 26 12:33:41 localhost kernel: [17179573.536000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 26 12:33:41 localhost kernel: [17179573.536000] Initializing Cryptographic API
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler noop registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler anticipatory registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler deadline registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] io scheduler cfq registered
Nov 26 12:33:41 localhost kernel: [17179573.536000] isapnp: Scanning for PnP cards...
Nov 26 12:33:41 localhost kernel: [17179573.892000] isapnp: No Plug & Play device found
Nov 26 12:33:41 localhost kernel: [17179573.928000] Real Time Clock Driver v1.12
Nov 26 12:33:41 localhost kernel: [17179573.928000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 26 12:33:41 localhost kernel: [17179573.936000] serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 26 12:33:41 localhost kernel: [17179573.940000] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 26 12:33:41 localhost kernel: [17179573.940000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Nov 26 12:33:41 localhost kernel: [17179573.940000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 26 12:33:41 localhost kernel: [17179573.944000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 26 12:33:41 localhost kernel: [17179573.944000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179573.944000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
Nov 26 12:33:41 localhost kernel: [17179573.944000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Nov 26 12:33:41 localhost kernel: [17179573.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 26 12:33:41 localhost kernel: [17179573.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 26 12:33:41 localhost kernel: [17179573.944000] mice: PS/2 mouse device common for all mice
Nov 26 12:33:41 localhost kernel: [17179573.948000] EISA: Probing bus 0 at eisa.0
Nov 26 12:33:41 localhost kernel: [17179573.948000] EISA: Detected 0 cards.
Nov 26 12:33:41 localhost kernel: [17179573.948000] NET: Registered protocol family 2
Nov 26 12:33:41 localhost kernel: [17179573.992000] input: AT Translated Set 2 keyboard as /class/input/input0
Nov 26 12:33:41 localhost kernel: [17179574.004000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP: Hash tables configured (established 32768 bind 32768)
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP reno registered
Nov 26 12:33:41 localhost kernel: [17179574.004000] TCP bic registered
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 1
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 8
Nov 26 12:33:41 localhost kernel: [17179574.004000] NET: Registered protocol family 20
Nov 26 12:33:41 localhost kernel: [17179574.004000] Using IPI No-Shortcut mode
Nov 26 12:33:41 localhost kernel: [17179574.004000] ACPI wakeup devices: 
Nov 26 12:33:41 localhost kernel: [17179574.004000] SLPB PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM 
Nov 26 12:33:41 localhost kernel: [17179574.004000] ACPI: (supports S0 S3 S4 S5)
Nov 26 12:33:41 localhost kernel: [17179574.004000] Freeing unused kernel memory: 332k freed
Nov 26 12:33:41 localhost kernel: [17179574.092000] vga16fb: initializing
Nov 26 12:33:41 localhost kernel: [17179574.092000] vga16fb: mapped to 0xc00a0000
Nov 26 12:33:41 localhost kernel: [17179574.240000] Console: switching to colour frame buffer device 80x25
Nov 26 12:33:41 localhost kernel: [17179574.240000] fb0: VGA16 VGA frame buffer device
Nov 26 12:33:41 localhost kernel: [17179575.392000] Capability LSM initialized
Nov 26 12:33:41 localhost kernel: [17179575.452000] ACPI: Fan [FAN] (on)
Nov 26 12:33:41 localhost kernel: [17179575.464000] ACPI: Thermal Zone [THRM] (38 C)
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: IDE controller at PCI slot 0000:00:1f.1
Nov 26 12:33:41 localhost kernel: [17179576.632000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: chipset revision 2
Nov 26 12:33:41 localhost kernel: [17179576.632000] ICH5: not 100%% native mode: will probe irqs later
Nov 26 12:33:41 localhost kernel: [17179576.632000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
Nov 26 12:33:41 localhost kernel: [17179576.632000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Nov 26 12:33:41 localhost kernel: [17179576.632000] Probing IDE interface ide0...
Nov 26 12:33:41 localhost kernel: [17179576.924000] hda: ST340014A, ATA DISK drive
Nov 26 12:33:41 localhost kernel: [17179577.600000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 26 12:33:41 localhost kernel: [17179577.604000] Probing IDE interface ide1...
Nov 26 12:33:41 localhost kernel: [17179578.344000] hdc: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
Nov 26 12:33:41 localhost kernel: [17179579.020000] ide1 at 0x170-0x177,0x376 on irq 15
Nov 26 12:33:41 localhost kernel: [17179579.032000] hda: max request size: 1024KiB
Nov 26 12:33:41 localhost kernel: [17179579.044000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 26 12:33:41 localhost kernel: [17179579.048000] hda: cache flushes supported
Nov 26 12:33:41 localhost kernel: [17179579.048000]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3
Nov 26 12:33:41 localhost kernel: [17179579.164000] hdc: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 26 12:33:41 localhost kernel: [17179579.164000] Uniform CD-ROM driver Revision: 3.20
Nov 26 12:33:41 localhost kernel: [17179579.784000] usbcore: registered new driver usbfs
Nov 26 12:33:41 localhost kernel: [17179579.788000] usbcore: registered new driver hub
Nov 26 12:33:41 localhost kernel: [17179579.788000] USB Universal Host Controller Interface driver v2.3
Nov 26 12:33:41 localhost kernel: [17179579.792000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179579.792000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 26 12:33:41 localhost kernel: [17179579.792000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000ac00
Nov 26 12:33:41 localhost kernel: [17179579.796000] hub 1-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179579.796000] hub 1-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179579.904000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
Nov 26 12:33:41 localhost kernel: [17179579.904000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 26 12:33:41 localhost kernel: [17179579.904000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000a000
Nov 26 12:33:41 localhost kernel: [17179579.904000] hub 2-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179579.904000] hub 2-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.012000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
Nov 26 12:33:41 localhost kernel: [17179580.012000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 26 12:33:41 localhost kernel: [17179580.012000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000a400
Nov 26 12:33:41 localhost kernel: [17179580.012000] hub 3-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.012000] hub 3-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.120000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179580.120000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 26 12:33:41 localhost kernel: [17179580.120000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000a800
Nov 26 12:33:41 localhost kernel: [17179580.120000] hub 4-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.120000] hub 4-0:1.0: 2 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.232000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
Nov 26 12:33:41 localhost kernel: [17179580.232000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 26 12:33:41 localhost kernel: [17179580.232000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 26 12:33:41 localhost kernel: [17179580.232000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfa100000
Nov 26 12:33:41 localhost kernel: [17179580.236000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 26 12:33:41 localhost kernel: [17179580.236000] hub 5-0:1.0: USB hub found
Nov 26 12:33:41 localhost kernel: [17179580.236000] hub 5-0:1.0: 8 ports detected
Nov 26 12:33:41 localhost kernel: [17179580.252000] usb 2-1: new full speed USB device using uhci_hcd and address 2
Nov 26 12:33:41 localhost kernel: [17179580.528000] Attempting manual resume
Nov 26 12:33:41 localhost kernel: [17179580.540000] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179580.824000] ReiserFS: hda7: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179580.836000] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179580.836000] ReiserFS: hda7: checking transaction log (hda7)
Nov 26 12:33:41 localhost kernel: [17179580.864000] ReiserFS: hda7: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179581.060000] usb 2-1: new full speed USB device using uhci_hcd and address 3
Nov 26 12:33:41 localhost kernel: [17179581.448000] usb 2-2: new full speed USB device using uhci_hcd and address 4
Nov 26 12:33:41 localhost kernel: [17179593.976000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 26 12:33:41 localhost kernel: [17179593.988000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 26 12:33:41 localhost kernel: [17179594.012000] Linux agpgart interface v0.101 (c) Dave Jones
Nov 26 12:33:41 localhost kernel: [17179594.028000] agpgart: Detected an Intel 865 Chipset.
Nov 26 12:33:41 localhost kernel: [17179594.036000] agpgart: AGP aperture is 128M @ 0xe8000000
Nov 26 12:33:41 localhost kernel: [17179594.124000] hw_random: RNG not detected
Nov 26 12:33:41 localhost kernel: [17179594.248000] input: PC Speaker as /class/input/input1
Nov 26 12:33:41 localhost kernel: [17179594.300000] FDC 0 is a post-1991 82077
Nov 26 12:33:41 localhost kernel: [17179594.944000] nvidia: module license 'NVIDIA' taints kernel.
Nov 26 12:33:41 localhost kernel: [17179594.960000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Nov 26 12:33:41 localhost kernel: [17179594.960000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22 06:44:39 PST 2005
Nov 26 12:33:41 localhost kernel: [17179595.116000] parport: PnPBIOS parport detected.
Nov 26 12:33:41 localhost kernel: [17179595.116000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Nov 26 12:33:41 localhost kernel: [17179595.348000] 8139cp: Try the "8139too" driver instead.
Nov 26 12:33:41 localhost kernel: [17179595.508000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
Nov 26 12:33:41 localhost kernel: [17179595.508000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
Nov 26 12:33:41 localhost kernel: [17179595.536000] 8139too Fast Ethernet driver 0.9.27
Nov 26 12:33:41 localhost kernel: [17179595.564000] drivers/usb/net/atmel/at76_usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta23-fw_dwl loading
Nov 26 12:33:41 localhost kernel: [17179595.644000] drivers/usb/net/atmel/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta23-fw_dwl
Nov 26 12:33:41 localhost kernel: [17179595.648000] drivers/usb/net/atmel/at76c503-fw_skel.c: Atmel at76c505 (RFMD 2958) Wireless LAN Driver v0.12beta23-fw_dwl loading
Nov 26 12:33:41 localhost kernel: [17179595.648000] drivers/usb/net/atmel/at76c503-fw_skel.c: downloading firmware atmel_at76c505-rfmd2958.bin
Nov 26 12:33:41 localhost kernel: [17179595.708000] Linux video capture interface: v1.00
Nov 26 12:33:41 localhost kernel: [17179595.820000] drivers/usb/net/atmel/at76c503-fw_skel.c: got it.
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: $Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp $ compiled Sep 16 2006 02:26:50
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: firmware version 1.101.0 #86 (fcs_len 4)
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: device's MAC 00:40:f4:ab:1e:f4, regulatory domain FCC (U.S) (id 16)
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/net/atmel/at76c503.c: registered wlan0
Nov 26 12:33:41 localhost kernel: [17179595.824000] usbcore: registered new driver at76c505-rfmd2958
Nov 26 12:33:41 localhost kernel: [17179595.824000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
Nov 26 12:33:41 localhost kernel: [17179595.828000] intel8x0_measure_ac97_clock: measured 58393 usecs
Nov 26 12:33:41 localhost kernel: [17179595.828000] intel8x0: clocking to 48000
Nov 26 12:33:41 localhost kernel: [17179595.840000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 209
Nov 26 12:33:41 localhost kernel: [17179595.840000] eth0: RealTek RTL8139 at 0xe08d4000, 00:14:2a:0c:6f:64, IRQ 209
Nov 26 12:33:41 localhost kernel: [17179595.840000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Nov 26 12:33:41 localhost kernel: [17179595.916000] usbcore: registered new driver spca5xx
Nov 26 12:33:41 localhost kernel: [17179595.916000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
Nov 26 12:33:41 localhost kernel: [17179596.252000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Nov 26 12:33:41 localhost kernel: [17179596.372000] ts: Compaq touchscreen protocol output
Nov 26 12:33:41 localhost kernel: [17179596.568000] lp0: using parport0 (interrupt-driven).
Nov 26 12:33:41 localhost kernel: [17179596.680000] Adding 514040k swap on /dev/hda8.  Priority:-1 extents:1 across:514040k
Nov 26 12:33:41 localhost kernel: [17179596.712000] Adding 2048248k swap on /dev/hda1.  Priority:-2 extents:1 across:2048248k
Nov 26 12:33:41 localhost kernel: [17179597.980000] NET: Registered protocol family 17
Nov 26 12:33:41 localhost kernel: [17179600.672000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 26 12:33:41 localhost kernel: [17179600.672000] md: bitmap version 4.39
Nov 26 12:33:41 localhost kernel: [17179600.948000] NET: Registered protocol family 10
Nov 26 12:33:41 localhost kernel: [17179600.948000] lo: Disabled Privacy Extensions
Nov 26 12:33:41 localhost kernel: [17179600.948000] IPv6 over IPv4 tunneling driver
Nov 26 12:33:41 localhost kernel: [17179605.304000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Nov 26 12:33:41 localhost kernel: [17179607.172000] ReiserFS: hda9: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179607.412000] ReiserFS: hda9: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179607.432000] ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179607.432000] ReiserFS: hda9: checking transaction log (hda9)
Nov 26 12:33:41 localhost kernel: [17179607.480000] ReiserFS: hda9: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179607.532000] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
Nov 26 12:33:41 localhost kernel: [17179608.072000] ReiserFS: hda3: using ordered data mode
Nov 26 12:33:41 localhost kernel: [17179608.084000] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 26 12:33:41 localhost kernel: [17179608.088000] ReiserFS: hda3: checking transaction log (hda3)
Nov 26 12:33:41 localhost kernel: [17179608.108000] ReiserFS: hda3: Using r5 hash to sort names
Nov 26 12:33:41 localhost kernel: [17179608.224000] NTFS driver 2.1.25 [Flags: R/O MODULE].
Nov 26 12:33:41 localhost kernel: [17179608.312000] NTFS volume version 3.1.
Nov 26 12:33:41 localhost kernel: [17179608.360000] NTFS volume version 3.1.
Nov 26 12:33:41 localhost kernel: [17179609.940000] pcc_acpi: loading...
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Power Button (FF) [PWRF]
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Power Button (CM) [PWRB]
Nov 26 12:33:41 localhost kernel: [17179609.972000] ACPI: Sleep Button (CM) [SLPB]
Nov 26 12:33:41 localhost kernel: [17179610.064000] ibm_acpi: ec object not found
Nov 26 12:33:41 localhost kernel: [17179611.740000] wlan0: no IPv6 routers present
Nov 26 12:33:44 localhost kernel: [17179614.672000] ppdev: user-space parallel port driver
Nov 26 12:33:45 localhost kernel: [17179616.044000] wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
Nov 26 12:33:51 localhost dhcdbd: Started up.
Nov 26 12:33:51 localhost kernel: [17179622.024000] ip_tables: (C) 2000-2002 Netfilter core team
Nov 26 12:33:51 localhost kernel: [17179622.140000] Netfilter messages via NETLINK v0.30.
Nov 26 12:33:51 localhost kernel: [17179622.172000] ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Device is in legacy mode, falling back to 2.x
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.364000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Device is in legacy mode, falling back to 2.x
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Nov 26 12:33:53 localhost kernel: [17179623.952000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Nov 26 12:33:54 localhost ntpd[4765]: ntpd 4.2.0a@1:4.2.0a+stable-8-r Mon May 29 02:48:41 UTC 2006 (1)
Nov 26 12:33:54 localhost ntpd[4765]: precision = 3.000 usec
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wildcard, 0.0.0.0#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wildcard, ::#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface lo, 127.0.0.1#123
Nov 26 12:33:54 localhost ntpd[4765]: Listening on interface wlan0, 192.168.1.4#123
Nov 26 12:33:54 localhost ntpd[4765]: kernel time sync status 0040
Nov 26 12:33:55 localhost ntpd[4765]: frequency initialized 0.000 PPM from /var/lib/ntp/ntp.drift
Nov 26 12:33:55 localhost /usr/sbin/cron[4797]: (CRON) INFO (pidfile fd = 3)
Nov 26 12:33:55 localhost /usr/sbin/cron[4798]: (CRON) STARTUP (fork ok)
Nov 26 12:33:55 localhost /usr/sbin/cron[4798]: (CRON) INFO (Running @reboot jobs)
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): starting (version 2.14.0), pid 4962 user 'inkybutton'
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readwrite:/home/inkybutton/.gconf" to a writable configuration source at position 1
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Nov 26 12:34:06 localhost gconfd (inkybutton-4962): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Nov 26 12:34:10 localhost gconfd (inkybutton-4962): Resolved address "xml:readwrite:/home/inkybutton/.gconf" to a writable configuration source at position 0

Revision history for this message

inkybutton (inkybutton) said on 2006-11-25:

#5

According to http://www.intel.com/support/processors/sb/CS-021710.htm, an HT-capable BIOS is required to master the awesome power of Hyper Threading. I think my BIOS isn't. Should I flash the BIOS memory and install a new one? I hope it's not too dangerous... (I am newbie at this, but I know that flashing your BIOS memory can easily turn your computer into a paper weight.)

Revision history for this message

Alan Pope 🍺🐧🐱 🦄 (popey) said on 2006-12-01:

#6

Heh. I have never had a BIOS update go wrong in maybe ~12 years of applying them. Go for it :)

Can you help with this problem?

Provide an answer of your own, or ask inkybutton for more information if necessary.

To post a message you must log in.

Ask a question

Edit question

Subscribers