Ubuntu

leadtek DTV 2000 plus card installation

Asked by Rohan

Could someone please point me in the correct direction to install the above tv tune card. I am running UBUNTU 12.04.4 lts. I have followed steps over the net without any luck.
Ifnot please recommend a TV tuner card that will work?
Thanks

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Thomas Krüger (thkrueger) said : 		#1

Can you please open the Terminal, run the follow command and post the full output of it? Thanks!

lspci -vv

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#2

The make and model does not tell us enough about the device. We need the chip on the card to be able to advise.

What is the output of :

lsb_release -a; uname -a; lsusb; lspci

Thanks

Revision history for this message
Rohan (rohan-j) said : 		#3

rohan@HTPC:~$ lspci -vv
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
 Subsystem: ASUSTeK Computer Inc. Device 8388
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: <access denied>

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 0000c000-0000cfff
 Memory behind bridge: fe900000-fe9fffff
 Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 0000d000-0000dfff
 Memory behind bridge: fea00000-feafffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
 Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 22
 Region 0: I/O ports at b000 [size=8]
 Region 1: I/O ports at a000 [size=4]
 Region 2: I/O ports at 9000 [size=8]
 Region 3: I/O ports at 8000 [size=4]
 Region 4: I/O ports at 7000 [size=16]
 Region 5: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>
 Kernel driver in use: ahci
 Kernel modules: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci-pci

00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
 Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci-pci

00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 19
 Region 0: Memory at fe8ff400 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
 Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Capabilities: <access denied>
 Kernel modules: sp5100_tco, i2c-piix4

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Interrupt: pin A routed to IRQ 16
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at ff00 [size=16]
 Capabilities: <access denied>
 Kernel driver in use: pata_atiixp
 Kernel modules: pata_acpi, pata_atiixp

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
 I/O behind bridge: 0000e000-0000efff
 Memory behind bridge: feb00000-febfffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
 Subsystem: ASUSTeK Computer Inc. Device 8389
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci-pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Capabilities: <access denied>
 Kernel driver in use: k10temp
 Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] (prog-if 00 [VGA controller])
 Subsystem: Hightech Information System Ltd. Device 2008
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 42
 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
 Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
 Region 4: I/O ports at c000 [size=256]
 Expansion ROM at fe9c0000 [disabled] [size=128K]
 Capabilities: <access denied>
 Kernel driver in use: radeon
 Kernel modules: radeon

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
 Subsystem: Hightech Information System Ltd. Device aa38
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 43
 Region 0: Memory at fe9ec000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>
 Kernel driver in use: snd_hda_intel
 Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0)
 Subsystem: ASUSTeK Computer Inc. Device 83fe
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 44
 Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
 Region 2: I/O ports at dc00 [size=128]
 Capabilities: <access denied>
 Kernel driver in use: atl1c
 Kernel modules: atl1c

03:07.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
 Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 21
 Region 4: I/O ports at ec00 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd

03:07.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
 Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 22
 Region 4: I/O ports at e880 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd

03:07.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI])
 Subsystem: VIA Technologies, Inc. USB 2.0 Controller
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin C routed to IRQ 23
 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: ehci-pci

rohan@HTPC:~$

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#4

Can you please run the command I gave in #1 and paste the output as an update.

Thanks

Revision history for this message
Rohan (rohan-j) said : 		#5

rohan@HTPC:~$ lsb_release -a; uname -a; lsusb; lspci
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.4 LTS
Release: 12.04
Codename: precise
Linux HTPC 3.11.0-20-generic #35~precise1-Ubuntu SMP Fri May 2 21:32:55 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc.
Bus 003 Device 003: ID 0413:6f12 Leadtek Research, Inc.
Bus 004 Device 002: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Bus 004 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 006 Device 002: ID 0a5c:21e8 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0)
03:07.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
03:07.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
03:07.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 63)
rohan@HTPC:~$

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#6

Is it PCI basef or is it a USB stick?
Thanks

Revision history for this message
Rohan (rohan-j) said : 		#7

It is PCI based for sure
Thanks

Revision history for this message
Thomas Krüger (thkrueger) said : 		#8

It's a PCI to USB bridge.

Here's the solution:
http://www.linuxtv.org/wiki/index.php/Leadtek_WinFast_DTV2000DS_PLUS

Can you help with this problem?

Provide an answer of your own, or ask Rohan for more information if necessary.

To post a message you must log in.