How to install usb to vga graphic adapter for dual monitor

Forgot to mention I have Ubuntu 13 saucy.

What is the output of :

sudo lshw -C display; lsb_release -a; uname -a; lsusb

You haven't said anything about the make and model of the USB stick. The command above should fill us in. In future please give as full details as you can.

Thanks

Hi,
Thank you for replying to my post.

Usb to vga device is USB 2.0 to VGA Female Adapter for Multi-Display Monitor +track, you can see it here: http://www.amazon.co.uk/Female-Adapter-Multi-Display-Monitor-track/dp/B00FMTM00W/ref=sr_1_1?ie=UTF8&qid=1397677989&sr=8-1&keywords=USB+2.0+to+VGA+Female+Adapter+for+Multi-Display+Monitor+%2Btrack

sudo lshw -C display:

*-display
       description: VGA compatible controller
       product: 82Q963/Q965 Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 02
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:42 memory:f0400000-f04fffff memory:e0000000-efffffff ioport:1200(size=8)

lsb_release -a:

LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch:core-4.1-ia32:core-4.1-noarch:security-4.0-ia32:security-4.0-noarch:security-4.1-ia32:security-4.1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 13.10
Release: 13.10
Codename: saucy

uname -a:

Linux adelchi-HP-Compaq-dc5700-Small-Form-Factor 3.11.0-19-generic #33-Ubuntu SMP Tue Mar 11 18:48:32 UTC 2014 i686 i686 i686 GNU/Linux

lsusb:

Bus 002 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 002 Device 002: ID 2297:3204
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

If you unplug the device and wait a few seconds. Then plug it back in, wait a few seconds then run:

dmesg | tail -n 20; lsusb

What is the output please

Thanks

dmesg | tail -n 20
[ 32.616115] [drm:drm_mode_debug_printmodeline], Modeline 17:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 32.616122] [drm:drm_mode_debug_printmodeline], Modeline 18:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 32.616128] [drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 32.616135] [drm:drm_mode_debug_printmodeline], Modeline 20:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 32.616141] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 32.616148] [drm:drm_mode_debug_printmodeline], Modeline 10:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 32.616154] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 32.616166] [drm:drm_mode_debug_printmodeline], Modeline 12:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 32.616171] [drm:drm_mode_debug_printmodeline], Modeline 13:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 32.616193] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 34.376035] [drm:intel_crt_detect], CRT detected via hotplug
[ 912.287085] [drm:i915_driver_open],
[ 912.599539] [drm:i915_driver_open],
[ 1224.115849] usb 2-3: USB disconnect, device number 2
[ 1283.112031] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 1283.245459] usb 2-3: New USB device found, idVendor=2297, idProduct=3204
[ 1283.245466] usb 2-3: New USB device strings: Mfr=1, Product=9, SerialNumber=2
[ 1283.245472] usb 2-3: Product: USB3.0 Display
[ 1283.245477] usb 2-3: Manufacturer: Grain-media Technology Corp.
[ 1283.245482] usb 2-3: SerialNumber: 123456789123456789

lsusb
Bus 002 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 002 Device 004: ID 2297:3204
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

This question was expired because it remained in the 'Needs information' state without activity for the last 15 days.

Anyone?

This question was expired because it remained in the 'Open' state without activity for the last 15 days.