Unable to install Realtek SD Card Reader Drivers.

Have you tried driversguide.com

No such luck. If it's there, I'm not able to find it. I tried the driver name the full name and I'm unable to find anything relating to the SD Card driver that I'm not able to install. Also, below is the output of lsmod that I forgot to post before.

sam@Sam-HPLaptop:~$ lsmod
Module Size Used by
snd_seq_dummy 12798 0
hp_wmi 18048 0
sparse_keymap 13890 1 hp_wmi
snd_hda_codec_idt 70256 1
snd_hda_codec_hdmi 36913 1
joydev 17377 0
hid_generic 12540 0
uvcvideo 80847 0
kvm_amd 59717 0
snd_seq_midi 13324 0
videobuf2_vmalloc 13056 1 uvcvideo
snd_seq_midi_event 14899 1 snd_seq_midi
videobuf2_memops 13202 1 videobuf2_vmalloc
videobuf2_core 40513 1 uvcvideo
kvm 443165 1 kvm_amd
microcode 22881 0
videodev 129260 2 uvcvideo,videobuf2_core
parport_pc 28152 0
ppdev 17073 0
usbhid 47074 0
arc4 12615 2
snd_rawmidi 30180 1 snd_seq_midi
hid 101002 2 hid_generic,usbhid
snd_hda_intel 39619 10
snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
psmouse 95870 0
rfcomm 42641 0
bnep 18036 2
rt2800pci 18582 0
rt2800lib 66507 1 rt2800pci
snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
radeon 942029 4
serio_raw 13215 0
bluetooth 228667 10 bnep,rfcomm
k10temp 13126 0
rt2x00pci 14519 1 rt2800pci
rt2x00lib 54869 3 rt2x00pci,rt2800lib,rt2800pci
snd_seq 61554 3 snd_seq_midi_event,snd_seq_dummy,snd_seq_midi
i2c_piix4 13266 0
mac80211 606457 3 rt2x00lib,rt2x00pci,rt2800lib
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
ttm 83187 1 radeon
rtsx_pci_ms 13011 0
drm_kms_helper 49394 1 radeon
snd_seq_device 14497 4 snd_seq,snd_rawmidi,snd_seq_dummy,snd_seq_midi
memstick 16554 1 rtsx_pci_ms
drm 286028 6 ttm,drm_kms_helper,radeon
snd_timer 29425 2 snd_pcm,snd_seq
cfg80211 510937 2 mac80211,rt2x00lib
binfmt_misc 17500 1
eeprom_93cx6 13344 1 rt2800pci
wmi 19070 1 hp_wmi
crc_ccitt 12707 1 rt2800lib
i2c_algo_bit 13413 1 radeon
snd 68876 30 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 12680 1 snd
hp_accel 26012 0
lis3lv02d 20111 1 hp_accel
input_polldev 13896 1 lis3lv02d
video 19390 0
mac_hid 13205 0
lp 17759 0
parport 46345 3 lp,ppdev,parport_pc
pata_acpi 13038 0
rtsx_pci_sdmmc 17475 0
sdhci_pci 18590 0
ahci 25731 2
sdhci 32522 1 sdhci_pci
pata_atiixp 13242 0
libahci 31364 1 ahci
rtsx_pci 33355 2 rtsx_pci_ms,rtsx_pci_sdmmc
r8169 67466 0

Also, please note that the card reader worked upon install of 12.04x86_64 but stopped working after updating the software. I don't recall the exact kernel that is initially installed with 12.04, but 3.5 and up seems to negate whatever is needed for the sd card reader to work.

Maybe that file is residing in a different directory
(e.g. /usr/src/linux-headers-3.8.0-27/arch/x86/syscalls/syscall_32.tbl and not
/usr/src/linux-headers-3.8.0-27-generic/arch/x86/syscalls/syscall_32.tbl)

To check for that, execute the following commands in a terminal:

sudo updatedb
locate syscall_32.tbl

please copy/paste the output into this question document that we can see it.

No luck, did not locate syscall_32.tbl

sam@Sam-HPLaptop:~$ sudo updatedb
[sudo] password for sam:
sam@Sam-HPLaptop:~$ locate syscall_32.tbl
sam@Sam-HPLaptop:~$

What Ubuntu release are you running?
What linux header packages have you installed?

lsb_release -a
uname -a
dpkg -l | grep linux-headers

Here is the requested info.

sam@Sam-HPLaptop:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 13.04
Release: 13.04
Codename: raring
sam@Sam-HPLaptop:~$ uname -a
Linux Sam-HPLaptop 3.8.0-27-generic #40-Ubuntu SMP Tue Jul 9 00:17:05 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
sam@Sam-HPLaptop:~$ dpkg -l | grep linux-headers
ii linux-headers-3.8.0-19 3.8.0-19.30 all Header files related to Linux kernel version 3.8.0
ii linux-headers-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel headers for version 3.8.0 on 64 bit x86 SMP
ii linux-headers-3.8.0-27 3.8.0-27.40 all Header files related to Linux kernel version 3.8.0
ii linux-headers-3.8.0-27-generic 3.8.0-27.40 amd64 Linux kernel headers for version 3.8.0 on 64 bit x86 SMP
ii linux-headers-generic 3.8.0.27.45 amd64 Generic Linux kernel headers
sam@Sam-HPLaptop:~$

The header file packages fitting to your running kernel seem to be available.

As far as I have seen, in the directory /usr/src/linux-headers-3.8.0-27/arch/x86/syscalls there are only three files, a Makefile and two scripts syscallhdr.sh and syscalltbl.sh

Googling for syscallhdr.sh and syscalltbl.sh brings up several directory listings for linux kernels, each of them with a syscalls directory that contains five files, the three ones mentioned above, and the files syscall_32.tbl and syscall_64.tbl

It seems that syscall_32.tbl and syscall_64.tbl for the 3.8.0 kernel are contained in the original kernel source https://launchpad.net/ubuntu/+archive/primary/+files/linux_3.8.0.orig.tar.gz so it could be worth trying to extract these two files from there and putting the, into the /usr/src/linux-headers-3.8.0-27/arch/x86/syscalls and/or the /usr/src/linux-headers-3.8.0-27-generic/arch/x86/syscalls directories.

To me this seems to be a bug in the preparation of the Ubuntu kernel package, I guess the files should not get lost.

Well, copying the ENTIRE Kernel resolved my problem, though I don't know if this is an adequate solution. Because, now what happens when my system updates again. I sure hope Ubuntu is looking into this issue. This also delinks all the symbolic links that were in the generic kernel folder. Hopefully this does not screw anything up down the line, but for now, the system seems to be running without issue still. Guess only time will tell. At least I can get back to learning German!

Thank you all for your help!

Sam

Problem not solved. After copying the all of the kernel files from the link you provided, and rebooting, the SD Card started working. But after restarting again, the issue has come back.

[ 1.486732] usb usb2: Product: EHCI Host Controller
[ 1.486734] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[ 1.486735] usb usb2: SerialNumber: 0000:00:13.2
[ 1.487069] hub 2-0:1.0: USB hub found
[ 1.487077] hub 2-0:1.0: 5 ports detected
[ 1.487296] ehci-platform: EHCI generic platform driver
[ 1.487306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.487396] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.487401] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.487432] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044f000
[ 1.546676] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.546682] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.546684] usb usb3: Product: OHCI Host Controller
[ 1.546686] usb usb3: Manufacturer: Linux 3.8.0-27-generic ohci_hcd
[ 1.546687] usb usb3: SerialNumber: 0000:00:12.0
[ 1.547015] hub 3-0:1.0: USB hub found
[ 1.547024] hub 3-0:1.0: 5 ports detected
[ 1.547246] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.547252] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.547270] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044d000
[ 1.606658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.606663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606666] usb usb4: Product: OHCI Host Controller
[ 1.606667] usb usb4: Manufacturer: Linux 3.8.0-27-generic ohci_hcd
[ 1.606669] usb usb4: SerialNumber: 0000:00:13.0
[ 1.606994] hub 4-0:1.0: USB hub found
[ 1.607003] hub 4-0:1.0: 5 ports detected
[ 1.607199] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.607302] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.607308] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 1.607558] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.607564] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.607570] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.607575] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.607581] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.607671] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.607673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.607675] usb usb5: Product: xHCI Host Controller
[ 1.607677] usb usb5: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.607678] usb usb5: SerialNumber: 0000:00:10.0
[ 1.607909] xHCI xhci_add_endpoint called for root hub
[ 1.607912] xHCI xhci_check_bandwidth called for root hub
[ 1.607938] hub 5-0:1.0: USB hub found
[ 1.607991] hub 5-0:1.0: 2 ports detected
[ 1.608139] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.608143] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.610915] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.610917] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.610919] usb usb6: Product: xHCI Host Controller
[ 1.610920] usb usb6: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.610922] usb usb6: SerialNumber: 0000:00:10.0
[ 1.611165] xHCI xhci_add_endpoint called for root hub
[ 1.611169] xHCI xhci_check_bandwidth called for root hub
[ 1.611197] hub 6-0:1.0: USB hub found
[ 1.611251] hub 6-0:1.0: 2 ports detected
[ 1.611582] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.611603] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[ 1.611858] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
[ 1.611864] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 1.611870] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 1.611876] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.611881] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.611986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.611988] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.611990] usb usb7: Product: xHCI Host Controller
[ 1.611992] usb usb7: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.611993] usb usb7: SerialNumber: 0000:00:10.1
[ 1.612236] xHCI xhci_add_endpoint called for root hub
[ 1.612241] xHCI xhci_check_bandwidth called for root hub
[ 1.612269] hub 7-0:1.0: USB hub found
[ 1.612322] hub 7-0:1.0: 2 ports detected
[ 1.612470] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.612475] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.615219] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.615221] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.615223] usb usb8: Product: xHCI Host Controller
[ 1.615225] usb usb8: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[ 1.615226] usb usb8: SerialNumber: 0000:00:10.1
[ 1.615467] xHCI xhci_add_endpoint called for root hub
[ 1.615471] xHCI xhci_check_bandwidth called for root hub
[ 1.615501] hub 8-0:1.0: USB hub found
[ 1.615555] hub 8-0:1.0: 2 ports detected
[ 1.615849] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.622891] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.622899] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.623089] mousedev: PS/2 mouse device common for all mice
[ 1.623418] rtc_cmos 00:04: RTC can wake from S4
[ 1.623558] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.623582] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.623667] device-mapper: uevent: version 1.0.3
[ 1.623773] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: <email address hidden>
[ 1.623878] cpuidle: using governor ladder
[ 1.623989] cpuidle: using governor menu
[ 1.623993] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.623995] EFI Variables Facility v0.08 2004-May-17
[ 1.624415] ashmem: initialized
[ 1.624586] TCP: cubic registered
[ 1.624675] NET: Registered protocol family 10
[ 1.624853] NET: Registered protocol family 17
[ 1.624863] Key type dns_resolver registered
[ 1.625254] Loading module verification certificates
[ 1.626282] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
[ 1.626294] registered taskstats version 1
[ 1.628958] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.629537] Key type trusted registered
[ 1.631682] Key type encrypted registered
[ 1.634636] rtc_cmos 00:04: setting system clock to 2013-08-07 02:36:45 UTC (1375843005)
[ 1.634714] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 1.635958] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.636318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.636320] EDD information not available.
[ 1.637753] Freeing unused kernel memory: 996k freed
[ 1.638003] Write protecting the kernel read-only data: 12288k
[ 1.641391] Freeing unused kernel memory: 1168k freed
[ 1.644948] Freeing unused kernel memory: 1080k freed
[ 1.664233] udevd[106]: starting version 175
[ 1.773482] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.773760] r8169 0000:02:00.0: irq 51 for MSI/MSI-X
[ 1.773962] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004e98000, 08:2e:5f:95:79:b2, XID 0c900800 IRQ 51
[ 1.773966] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.777038] rtsx_pci 0000:04:00.0: irq 52 for MSI/MSI-X
[ 1.777058] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 52
[ 1.782019] sdhci: Secure Digital Host Controller Interface driver
[ 1.782025] sdhci: Copyright(c) Pierre Ossman
[ 1.784188] sdhci-pci 0000:04:00.1: SDHCI controller found [10ec:5209] (rev 1)
[ 1.784251] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.784260] mmc0: no vqmmc regulator found
[ 1.784263] mmc0: no vmmc regulator found
[ 1.784288] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.784432] Disabling lock debugging due to kernel taint
[ 1.785232] ahci 0000:00:11.0: version 3.0
[ 1.785315] ahci 0000:00:11.0: irq 53 for MSI/MSI-X
[ 1.785386] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 1.785390] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.785855] scsi0 : ahci
[ 1.786216] scsi1 : ahci
[ 1.786389] scsi2 : ahci
[ 1.786476] ata1: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450100 irq 53
[ 1.786477] ata2: DUMMY
[ 1.786480] ata3: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450200 irq 53
[ 1.795659] scsi3 : pata_atiixp
[ 1.796171] scsi4 : pata_atiixp
[ 1.796597] ata4: PATA max UDMA/100 cmd 0x4128 ctl 0x4144 bmdma 0x4100 irq 17
[ 1.796601] ata5: PATA max UDMA/100 cmd 0x4120 ctl 0x4140 bmdma 0x4108 irq 17
[ 1.817563] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.818588] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[ 1.853979] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.889664] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.925656] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.970434] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.228190] usb 2-1: New USB device found, idVendor=5986, idProduct=02ac
[ 2.228202] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.228209] usb 2-1: Product: HP TrueVision HD
[ 2.228214] usb 2-1: Manufacturer: HP TrueVision HD
[ 2.228219] usb 2-1: SerialNumber: 0x0003
[ 2.278498] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.278537] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.279378] ata1.00: ATA-8: SAMSUNG SSD PM830 2.5" 7mm 128GB, CXM02D1Q, max UDMA/133
[ 2.279385] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.279848] ata1.00: configured for UDMA/133
[ 2.280382] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM0 PQ: 0 ANSI: 5
[ 2.280679] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.280744] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.281140] sd 0:0:0:0: [sda] Write Protect is off
[ 2.281146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.281389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.281827] ata3.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
[ 2.282554] sda: sda1 sda2 < sda5 >
[ 2.282898] ata3.00: configured for UDMA/100
[ 2.283601] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.292803] scsi 2:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
[ 2.308617] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.308624] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.309000] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.309176] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.342293] tsc: Refined TSC clocksource calibration: 1597.095 MHz
[ 2.342302] Switching to clocksource tsc
[ 2.358859] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.714396] Adding 7839740k swap on /dev/sda5. Priority:-1 extents:1 across:7839740k SS
[ 2.750381] usb 4-2: new full-speed USB device number 2 using ohci_hcd
[ 2.915388] usb 4-2: New USB device found, idVendor=138a, idProduct=0018
[ 2.915393] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.915395] usb 4-2: SerialNumber: 80be835a704a
[ 3.015579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.026112] usb 7-1: new low-speed USB device number 2 using xhci_hcd
[ 3.077019] usb 7-1: New USB device found, idVendor=03f0, idProduct=0024
[ 3.077024] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.077027] usb 7-1: Product: HP Basic USB Keyboard
[ 3.077029] usb 7-1: Manufacturer: CHICONY
[ 3.077271] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.098551] udevd[370]: starting version 175
[ 3.190599] mmc1: error -110 whilst initialising SD card
[ 3.214030] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 3.246738] lp: driver loaded but no devices found
[ 3.264280] AMD IOMMUv2 driver by Joerg Roedel <email address hidden>
[ 3.264286] AMD IOMMUv2 functionality not available on this system
[ 3.274533] type=1400 audit(1375843007.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=464 comm="apparmor_parser"
[ 3.275153] type=1400 audit(1375843007.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[ 3.275513] type=1400 audit(1375843007.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser"
[ 3.329389] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20121018/utaddress-251)
[ 3.329401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.330292] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.338950] hp_accel: laptop model unknown, using default axes configuration
[ 3.361410] cfg80211: Calling CRDA to update world regulatory domain
[ 3.365950] snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
[ 3.379446] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7236 MBytes.
[ 3.379563] <6>[fglrx] vendor: 1002 device: 9641 count: 1
[ 3.379927] <6>[fglrx] vendor: 1002 device: 6741 count: 2
[ 3.380194] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 3.380619] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 3.380628] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.380795] <6>[fglrx] Kernel PAT support is enabled
[ 3.380826] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 2 minors
[ 3.383564] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 3.390331] usb 3-2: New USB device found, idVendor=1bcf, idProduct=000c
[ 3.390338] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.390342] usb 3-2: Product: USB Laser Wheel Mouse
[ 3.406114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.406953] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20121018/dsfield-211)
[ 3.406966] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880203e6ecf8), AE_ALREADY_EXISTS (20121018/psparse-537)
[ 3.406985] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20121018/ac-122)
[ 3.423130] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 3.423263] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 3.423275] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 3.452571] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.507537] Linux video capture interface: v2.00
[ 3.522400] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
[ 3.540133] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
[ 3.540232] usbcore: registered new interface driver uvcvideo
[ 3.540234] USB Video Class driver (1.1.1)
[ 3.555394] usbcore: registered new interface driver usbhid
[ 3.555399] usbhid: USB HID core driver
[ 3.592113] microcode: CPU0: patch_level=0x03000027
[ 3.595655] microcode: CPU1: patch_level=0x03000027
[ 3.595705] microcode: CPU2: patch_level=0x03000027
[ 3.595723] microcode: CPU3: patch_level=0x03000027
[ 3.599976] microcode: Microcode Update Driver: v2.00 <email address hidden>, Peter Oruba
[ 3.655907] kvm: Nested Virtualization enabled
[ 3.655914] kvm: Nested Paging enabled
[ 3.753823] Bluetooth: Core ver 2.16
[ 3.765462] NET: Registered protocol family 31
[ 3.765469] Bluetooth: HCI device and connection manager initialized
[ 3.765482] Bluetooth: HCI socket layer initialized
[ 3.765486] Bluetooth: L2CAP socket layer initialized
[ 3.765497] Bluetooth: SCO socket layer initialized
[ 3.783623] acpi device:01: registered as cooling_device4
[ 3.783660] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.783715] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 3.796755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.796761] Bluetooth: BNEP filters: protocol multicast
[ 3.796774] Bluetooth: BNEP socket layer initialized
[ 3.797911] Bluetooth: RFCOMM TTY layer initialized
[ 3.797929] Bluetooth: RFCOMM socket layer initialized
[ 3.797931] Bluetooth: RFCOMM ver 1.11
[ 3.820493] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/input/input9
[ 3.827341] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-1/input0
[ 3.827707] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input10
[ 3.830390] hid-generic 0003:1BCF:000C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:12.0-2/input0
[ 3.843028] cfg80211: World regulatory domain updated:
[ 3.843035] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.843038] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.843041] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.843044] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.843046] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.843049] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.870708] ppdev: user-space parallel port driver
[ 3.884343] init: avahi-cups-reload main process (864) terminated with status 1
[ 3.927366] acpi device:05: registered as cooling_device5
[ 3.927408] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 3.927509] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11
[ 3.928835] type=1400 audit(1375843007.789:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=921 comm="apparmor_parser"
[ 3.929638] type=1400 audit(1375843007.789:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=921 comm="apparmor_parser"
[ 3.967980] init: failsafe main process (897) killed by TERM signal
[ 4.045382] type=1400 audit(1375843007.905:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=989 comm="apparmor_parser"
[ 4.046141] type=1400 audit(1375843007.909:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=989 comm="apparmor_parser"
[ 4.048960] type=1400 audit(1375843007.909:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=991 comm="apparmor_parser"
[ 4.050315] type=1400 audit(1375843007.913:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=991 comm="apparmor_parser"
[ 4.291801] r8169 0000:02:00.0 eth0: link down
[ 4.291906] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.292476] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.342153] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.342567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.659744] mmc1: error -110 whilst initialising SD card
[ 6.045615] mmc1: error -110 whilst initialising SD card
[ 123.364976] init: udevtrigger post-stop process (397) terminated with status 1
[ 123.376927] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 123.376936] vesafb: scrolling: redraw
[ 123.376945] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 123.379867] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005780000, using 4160k, total 4160k
[ 123.380296] Console: switching to colour frame buffer device 170x48
[ 123.390487] fb0: VESA VGA frame buffer device
[ 123.444575] init: plymouth-splash main process (1332) terminated with status 1
[ 124.558660] fglrx_pci 0000:00:01.0: irq 55 for MSI/MSI-X
[ 124.559578] <6>[fglrx] Firegl kernel thread PID: 1350
[ 124.559847] <6>[fglrx] Firegl kernel thread PID: 1351
[ 124.560090] <6>[fglrx] Firegl kernel thread PID: 1352
[ 124.560241] <6>[fglrx] IRQ 55 Enabled
[ 124.570857] <6>[fglrx] Gart USWC size:1280 M.
[ 124.570859] <6>[fglrx] Gart cacheable size:508 M.
[ 124.570864] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 124.570865] <6>[fglrx] Reserved FB block: Unshared offset:fbfc000, size:404000
[ 124.570867] <6>[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 124.601117] vgaarb: this pci device is not a vga device
[ 124.601151] vgaarb: this pci device is not a vga device
[ 124.601166] vgaarb: this pci device is not a vga device
[ 124.601180] vgaarb: this pci device is not a vga device
[ 124.601195] vgaarb: this pci device is not a vga device
[ 124.601210] vgaarb: this pci device is not a vga device
[ 124.601225] vgaarb: this pci device is not a vga device
[ 124.601240] vgaarb: this pci device is not a vga device
[ 124.601256] vgaarb: this pci device is not a vga device
[ 124.601299] vgaarb: this pci device is not a vga device
[ 124.601310] vgaarb: this pci device is not a vga device
[ 124.601320] vgaarb: this pci device is not a vga device
[ 124.601331] vgaarb: this pci device is not a vga device
[ 124.601342] vgaarb: this pci device is not a vga device
[ 124.601354] vgaarb: this pci device is not a vga device
[ 124.601365] vgaarb: this pci device is not a vga device
[ 124.601378] vgaarb: this pci device is not a vga device
[ 124.601389] vgaarb: this pci device is not a vga device
[ 124.601402] vgaarb: this pci device is not a vga device
[ 124.601414] vgaarb: this pci device is not a vga device
[ 124.601427] vgaarb: this pci device is not a vga device
[ 124.601439] vgaarb: this pci device is not a vga device
[ 124.601452] vgaarb: this pci device is not a vga device
[ 124.601464] vgaarb: this pci device is not a vga device
[ 124.601477] vgaarb: this pci device is not a vga device
[ 124.601490] vgaarb: this pci device is not a vga device
[ 124.601514] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 124.601537] vgaarb: this pci device is not a vga device
[ 124.601551] vgaarb: this pci device is not a vga device
[ 124.601566] vgaarb: this pci device is not a vga device
[ 124.601581] vgaarb: this pci device is not a vga device
[ 128.693367] fglrx_pci 0000:01:00.0: irq 56 for MSI/MSI-X
[ 128.694101] <6>[fglrx] Firegl kernel thread PID: 1355
[ 128.694294] <6>[fglrx] Firegl kernel thread PID: 1356
[ 128.694730] <6>[fglrx] Firegl kernel thread PID: 1357
[ 128.695067] <6>[fglrx] IRQ 56 Enabled
[ 128.748110] <6>[fglrx] Gart USWC size:1280 M.
[ 128.748120] <6>[fglrx] Gart cacheable size:508 M.
[ 128.748131] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 128.748137] <6>[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000
[ 128.748142] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 128.773280] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 128.929031] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 172.647973] systemd-hostnamed[2281]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 197.513811] wlan0: authenticate with 00:23:68:74:a0:91
[ 197.528469] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3)
[ 197.529915] wlan0: authenticated
[ 197.532396] wlan0: associate with 00:23:68:74:a0:91 (try 1/3)
[ 197.537181] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1)
[ 197.537320] wlan0: associated
[ 197.537411] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 197.537563] cfg80211: Calling CRDA for country: US
[ 197.548532] cfg80211: Regulatory domain changed to country: US
[ 197.548541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 197.548549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 197.548556] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 197.548561] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 197.548566] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 197.548570] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 197.548575] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 205.913832] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC__.EGRW] (Node ffff880203e6b410), AE_AML_INFINITE_LOOP (20121018/psparse-537)
[ 205.913864] ACPI Error: Method parse/execution failed [\_SB_.ACEL.ALRD] (Node ffff880203e6eed8), AE_AML_INFINITE_LOOP (20121018/psparse-537)
[ 205.913890] lis3lv02d: unknown sensor type 0x0
[ 205.913910] hp_accel: probe of HPQ0004:00 failed with error -22
[ 205.914536] wmi: Mapper loaded
[ 205.930848] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 221.030321] wlan0: authenticate with 5c:0e:8b:1e:7d:b1
[ 221.038627] wlan0: send auth to 5c:0e:8b:1e:7d:b1 (try 1/3)
[ 221.038864] cfg80211: Calling CRDA to update world regulatory domain
[ 221.040038] wlan0: authenticated
[ 221.046590] cfg80211: World regulatory domain updated:
[ 221.046596] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 221.046600] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.046604] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 221.046606] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 221.046609] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.046611] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.046821] wlan0: associate with 5c:0e:8b:1e:7d:b1 (try 1/3)
[ 221.054529] wlan0: RX AssocResp from 5c:0e:8b:1e:7d:b1 (capab=0x8411 status=0 aid=1)
[ 221.054607] wlan0: associated
[ 221.054681] cfg80211: Calling CRDA for country: US
[ 221.060287] cfg80211: Regulatory domain changed to country: US
[ 221.060292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 221.060295] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 221.060299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 221.060301] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.060304] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.060306] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 221.060308] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 287.481607] mmc1: error -110 whilst initialising SD card
[ 288.877101] mmc1: error -110 whilst initialising SD card
[ 290.252688] mmc1: error -110 whilst initialising SD card
sam@Sam-HPLaptop:~$

Just to note, I have opened a Bug on this issue.

Here is the bug details I've posted. I've also linked to this question in the bug.

https://bugs.launchpad.net/ubuntu/+bug/1209047

I do not know what exactly you have done "...copying the ENTIRE Kernel...".
This was not what I wanted to recommend. My proposal was to just extract the two files syscall_32.tbl and syscall_64.tbl from the original kernel source https://launchpad.net/ubuntu/+archive/primary/+files/linux_3.8.0.orig.tar.gz and put them into the right directories, and then try compiling your SD card driver.

I started only copying the two files, but they called for other files in other directories. In the end, it was easier to just copy all of the files and folders over from the tarball to the 3.8.0-27-generic kenel directory. As stated, this worked after a reboot, but then stopped working after rebooting again.

I do not fully understand how the two files can have "called for other files in other directories". Can you please give more details?

I added the two files. When I ran the ./configure for the driver it then errored because it was looking for more files in the generic folder. Everytime I'd add one, it'd either error because the file added was looking for another file, or the configure file was looking for another file in another directory. In the end, it was easier to just copy and paste all the files from the tarball and add/merge or keep the existing file if they were already present. I then did a restart and it got the SD card working for that one "session". As soon as I restarted, it stopped working again.

http://ubuntuforums.org/showthread.php?t=2110369