beryl freezing

Don't you have'nt any error message? Try giving a look at /var/log/X*.

Can you post the output of sudo dmesg?

Sudo Dmesg:

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[17179569.184000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196592
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 192496 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI ) @ 0x000fa310
[17179569.184000] ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000
[17179569.184000] ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0030
[17179569.184000] ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0160c000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1659.898 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.092000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179573.096000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.124000] Memory: 769512k/786368k available (1910k kernel code, 16292k reserved, 1070k data, 308k init, 0k highmem)
[17179573.124000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.204000] Calibrating delay using timer specific routine.. 3321.37 BogoMIPS (lpj=6642755)
[17179573.204000] Security Framework v1.0.0 initialized
[17179573.204000] SELinux: Disabled at boot.
[17179573.204000] Mount-cache hash table entries: 512
[17179573.204000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[17179573.204000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[17179573.204000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179573.204000] CPU: L2 Cache: 256K (64 bytes/line)
[17179573.204000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
[17179573.204000] Checking 'hlt' instruction... OK.
[17179573.220000] SMP alternatives: switching to UP code
[17179573.220000] Freeing SMP alternatives: 16k freed
[17179573.220000] checking if image is initramfs... it is
[17179573.800000] Freeing initrd memory: 5564k freed
[17179573.800000] ACPI: Core revision 20060707
[17179573.804000] ACPI: Looking for DSDT ... not found!
[17179573.804000] ACPI: setting ELCR to 0200 (from 1820)
[17179573.808000] CPU0: AMD Athlon(tm) XP 2000+ stepping 00
[17179573.808000] SMP motherboard not detected.
[17179573.808000] Local APIC not detected. Using dummy APIC emulation.
[17179573.808000] Brought up 1 CPUs
[17179573.808000] migration_cost=0
[17179573.808000] NET: Registered protocol family 16
[17179573.808000] EISA bus registered
[17179573.808000] ACPI: bus type pci registered
[17179573.812000] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[17179573.812000] PCI: Using configuration type 1
[17179573.812000] Setting up standard PCI resources
[17179573.820000] ACPI: Interpreter enabled
[17179573.820000] ACPI: Using PIC for interrupt routing
[17179573.820000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.820000] PCI: Probing PCI hardware (bus 00)
[17179573.824000] Uncovering SIS18 that hid as a SIS503 (compatible=1)
[17179573.824000] Enabling SiS 96x SMBus.
[17179573.824000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
[17179573.824000] Boot video device is 0000:01:00.0
[17179573.824000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.828000] ACPI: Power Resource [URP1] (off)
[17179573.828000] ACPI: Power Resource [URP2] (off)
[17179573.828000] ACPI: Power Resource [FDDP] (off)
[17179573.828000] ACPI: Power Resource [LPTP] (off)
[17179573.832000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[17179573.832000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[17179573.832000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[17179573.832000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[17179573.832000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.832000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.832000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.832000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 *12 14 15)
[17179573.832000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.832000] pnp: PnP ACPI init
[17179573.836000] pnp: PnP ACPI: found 12 devices
[17179573.836000] PnPBIOS: Disabled by ACPI PNP
[17179573.836000] PCI: Using ACPI for IRQ routing
[17179573.836000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.840000] PCI: Bridge: 0000:00:01.0
[17179573.840000] IO window: b000-bfff
[17179573.840000] MEM window: cfe00000-cfefffff
[17179573.840000] PREFETCH window: afc00000-cfcfffff
[17179573.840000] NET: Registered protocol family 2
[17179573.880000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.880000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179573.880000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.884000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.884000] TCP reno registered
[17179573.884000] audit: initializing netlink socket (disabled)
[17179573.884000] audit(1162636326.884:1): initialized
[17179573.884000] VFS: Disk quotas dquot_6.5.1
[17179573.884000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.884000] Initializing Cryptographic API
[17179573.884000] io scheduler noop registered
[17179573.884000] io scheduler anticipatory registered
[17179573.884000] io scheduler deadline registered
[17179573.884000] io scheduler cfq registered (default)
[17179573.884000] isapnp: Scanning for PnP cards...
[17179574.236000] isapnp: No Plug & Play device found
[17179574.264000] Real Time Clock Driver v1.12ac
[17179574.264000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.264000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.264000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179574.268000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.268000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179574.268000] mice: PS/2 mouse device common for all mice
[17179574.268000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.268000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.268000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.268000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179574.268000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179574.272000] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[17179574.272000] If AUX port is really absent please use the 'i8042.noaux' option.
[17179574.272000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.276000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.276000] EISA: Probing bus 0 at eisa.0
[17179574.276000] EISA: Detected 0 cards.
[17179574.276000] TCP bic registered
[17179574.276000] NET: Registered protocol family 1
[17179574.276000] NET: Registered protocol family 8
[17179574.276000] NET: Registered protocol family 20
[17179574.276000] Using IPI No-Shortcut mode
[17179574.276000] ACPI: (supports S0 S1 S4 S5)
[17179574.276000] Freeing unused kernel memory: 308k freed
[17179574.340000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.420000] Capability LSM initialized
[17179576.072000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179576.072000] SIS5513: chipset revision 208
[17179576.072000] SIS5513: not 100% native mode: will probe irqs later
[17179576.072000] SIS5513: SiS735 ATA 100 (2nd gen) controller
[17179576.072000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
[17179576.072000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
[17179576.072000] Probing IDE interface ide0...
[17179576.360000] hda: WDC WD800BB-00CAA1, ATA DISK drive
[17179576.640000] hdb: HDS722516VLAT20, ATA DISK drive
[17179576.696000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.724000] Probing IDE interface ide1...
[17179577.460000] hdc: ASUS DRW-0402P/D, ATAPI CD/DVD-ROM drive
[17179578.244000] hdd: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
[17179578.312000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.328000] hda: max request size: 128KiB
[17179578.396000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[17179578.396000] hda: cache flushes not supported
[17179578.396000] hda: hda1 hda2 < hda5 >
[17179578.440000] hdb: max request size: 512KiB
[17179578.440000] hdb: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(33)
[17179578.440000] hdb: cache flushes supported
[17179578.440000] hdb: hdb1 hdb2 < hdb5 >
[17179578.492000] hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[17179578.492000] Uniform CD-ROM driver Revision: 3.20
[17179578.524000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.960000] usbcore: registered new driver usbfs
[17179578.964000] usbcore: registered new driver hub
[17179578.964000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.964000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179578.964000] PCI: setting IRQ 11 as level-triggered
[17179578.964000] ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179578.964000] ohci_hcd 0000:00:02.2: OHCI Host Controller
[17179578.964000] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[17179579.496000] ohci_hcd 0000:00:02.2: irq 11, io mem 0xcfffe000
[17179579.516000] ieee1394: Initialized config rom entry `ip1394'
[17179579.552000] usb usb1: configuration #1 chosen from 1 choice
[17179579.552000] hub 1-0:1.0: USB hub found
[17179579.552000] hub 1-0:1.0: 3 ports detected
[17179579.656000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179579.656000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179579.708000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[cfffc000-cfffc7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179579.712000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[17179579.712000] PCI: setting IRQ 5 as level-triggered
[17179579.712000] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179579.712000] ehci_hcd 0000:00:0d.2: EHCI Host Controller
[17179579.712000] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 2
[17179579.736000] ehci_hcd 0000:00:0d.2: irq 5, io mem 0xcfffde00
[17179579.736000] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[17179579.736000] usb usb2: configuration #1 chosen from 1 choice
[17179579.736000] hub 2-0:1.0: USB hub found
[17179579.736000] hub 2-0:1.0: 5 ports detected
[17179579.852000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 12
[17179579.852000] PCI: setting IRQ 12 as level-triggered
[17179579.852000] ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 12 (level, low) -> IRQ 12
[17179579.852000] ohci_hcd 0000:00:02.3: OHCI Host Controller
[17179579.852000] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 3
[17179580.372000] ohci_hcd 0000:00:02.3: irq 12, io mem 0xcffff000
[17179580.428000] usb usb3: configuration #1 chosen from 1 choice
[17179580.428000] hub 3-0:1.0: USB hub found
[17179580.428000] hub 3-0:1.0: 3 ports detected
[17179580.468000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[17179580.532000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179580.532000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179580.532000] ohci_hcd 0000:00:0d.0: OHCI Host Controller
[17179580.532000] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4
[17179580.532000] ohci_hcd 0000:00:0d.0: irq 11, io mem 0xcfffa000
[17179581.096000] usb usb4: configuration #1 chosen from 1 choice
[17179581.096000] hub 4-0:1.0: USB hub found
[17179581.096000] hub 4-0:1.0: 3 ports detected
[17179581.132000] usb 1-1: configuration #1 chosen from 1 choice
[17179581.368000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c01070023de]
[17179581.612000] ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179581.612000] ohci_hcd 0000:00:0d.1: OHCI Host Controller
[17179581.612000] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5
[17179581.612000] ohci_hcd 0000:00:0d.1: irq 11, io mem 0xcfffb000
[17179582.172000] usb usb5: configuration #1 chosen from 1 choice
[17179582.172000] hub 5-0:1.0: USB hub found
[17179582.172000] hub 5-0:1.0: 2 ports detected
[17179582.412000] usb 4-2: new full speed USB device using ohci_hcd and address 2
[17179582.720000] usb 4-2: configuration #1 chosen from 1 choice
[17179582.748000] usbcore: registered new driver hiddev
[17179582.780000] input: Microsoft Microsoft Wireless Optical Desktop� 2.10 as /class/input/input1
[17179582.780000] input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop� 2.10] on usb-0000:00:02.2-1
[17179582.816000] input: Microsoft Microsoft Wireless Optical Desktop� 2.10 as /class/input/input2
[17179582.816000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop� 2.10] on usb-0000:00:02.2-1
[17179582.816000] usbcore: registered new driver usbhid
[17179582.816000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179582.864000] Attempting manual resume
[17179582.896000] kjournald starting. Commit interval 5 seconds
[17179582.896000] EXT3-fs: mounted filesystem with ordered data mode.
[17179593.692000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[17179593.720000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179593.728000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179593.972000] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[17179593.996000] Linux video capture interface: v1.00
[17179594.080000] bttv: driver version 0.9.16 loaded
[17179594.080000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179594.080000] bttv: Bt8xx card found (0).
[17179594.080000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179594.080000] bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 11, latency: 64, mmio: 0xcfdfe000
[17179594.080000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[17179594.080000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
[17179594.080000] bttv0: gpio: en=00000000, out=00000000 in=00bff707 [init]
[17179594.088000] bttv0: using tuner=5
[17179594.088000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179594.088000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179594.092000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179594.092000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179594.148000] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179594.148000] tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[17179594.184000] bttv0: registered device video0
[17179594.184000] bttv0: registered device vbi0
[17179594.188000] bttv0: registered device radio0
[17179594.188000] bttv0: PLL: 28636363 => 35468950 .. ok
[17179594.220000] input: bttv IR (card=34) as /class/input/input3
[17179594.220000] bttv-input: bttv IR (card=34) detected at pci-0000:00:0f.0/ir0
[17179594.828000] 8139too Fast Ethernet driver 0.9.27
[17179594.828000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179594.828000] eth0: RealTek RTL8139 at 0xf09b6f00, 00:e0:4c:a8:d6:91, IRQ 5
[17179594.828000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179594.892000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179595.068000] input: PC Speaker as /class/input/input4
[17179595.264000] parport: PnPBIOS parport detected.
[17179595.264000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179595.296000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179595.320000] bt878: AUDIO driver version 0.0.0 loaded
[17179595.460000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.464000] agpgart: Detected SiS 735 chipset
[17179595.468000] agpgart: AGP aperture is 64M @ 0xd0000000
[17179595.500000] ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179595.540000] Floppy drive(s): fd0 is 1.44M
[17179595.572000] FDC 0 is a post-1991 82077
[17179595.744000] Bluetooth: Core ver 2.8
[17179595.744000] NET: Registered protocol family 31
[17179595.744000] Bluetooth: HCI device and connection manager initialized
[17179595.744000] Bluetooth: HCI socket layer initialized
[17179595.760000] Bluetooth: HCI USB driver ver 2.9
[17179595.760000] usbcore: registered new driver hci_usb
[17179595.816000] intel8x0_measure_ac97_clock: measured 55837 usecs
[17179595.816000] intel8x0: clocking to 48000
[17179596.076000] ts: Compaq touchscreen protocol output
[17179596.648000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179596.824000] lp0: using parport0 (interrupt-driven).
[17179596.884000] SCSI subsystem initialized
[17179596.896000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179596.896000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179596.944000] Adding 2265124k swap on /dev/disk/by-uuid/31ccfa28-ddf6-42d7-a098-7f757e59df2c. Priority:-1 extents:1 across:2265124k
[17179597.008000] EXT3 FS on hda1, internal journal
[17179597.696000] NET: Registered protocol family 17
[17179603.148000] ACPI: Power Button (FF) [PWRF]
[17179603.148000] ACPI: Sleep Button (CM) [SLPB]
[17179603.300000] ibm_acpi: ec object not found
[17179603.336000] pcc_acpi: loading...
[17179606.024000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179606.028000] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
[17179606.028000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179606.420000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179607.920000] NET: Registered protocol family 10
[17179607.920000] lo: Disabled Privacy Extensions
[17179607.920000] IPv6 over IPv4 tunneling driver
[17179609.380000] [fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option
[17179609.380000] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
[17179609.380000] [fglrx] AGP detected, AgpState = 0x1f000207 (hardware caps of chipset)
[17179609.380000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179609.380000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179609.380000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179609.380000] [fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps)
[17179609.396000] [fglrx] total GART = 67108864
[17179609.396000] [fglrx] free GART = 51113984
[17179609.396000] [fglrx] max single GART = 51113984
[17179609.396000] [fglrx] total LFB = 126791680
[17179609.396000] [fglrx] free LFB = 116211712
[17179609.396000] [fglrx] max single LFB = 116211712
[17179609.396000] [fglrx] total Inv = 0
[17179609.396000] [fglrx] free Inv = 0
[17179609.396000] [fglrx] max single Inv = 0
[17179609.396000] [fglrx] total TIM = 0
[17179612.080000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179612.080000] apm: overridden by ACPI.
[17179617.928000] eth0: no IPv6 routers present
[17179623.396000] Bluetooth: L2CAP ver 2.8
[17179623.396000] Bluetooth: L2CAP socket layer initialized
[17179623.436000] Bluetooth: RFCOMM socket layer initialized
[17179623.436000] Bluetooth: RFCOMM TTY layer initialized
[17179623.436000] Bluetooth: RFCOMM ver 1.7

I have no idea what im looking for in /var/log/X*