switching between virtual consoles not working
When switching from GUI(virtual Console-7) to virtual Console-1 by pressing Ctrl-Alt-F1 it's working.
When i try to comeback from Virtual console-1 to GUI(Virtual Console-7) by pressing Ctrl-Alt-F7 it is stopping in the middle of the process but in text mode only. And after that screen is freezing and i need to reboot the system to login. It says Some Alsa Timidity error. Please give me solution to work this perfectly otherwise i am getting problem everytime.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- bhaskar
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Post here the results of below commands
lsb_release -rcd ; uname -r
lspci -nnk | grep -iA vga
echo $DESKTOP_SESSION
Regards
NikTh
|
Revision history for this message
|
#2 |
Also what is the output of:
sudo dmidecode -t 1
Thanks
|
Revision history for this message
|
#3 |
bhaskar@
Description: Ubuntu 12.10
Release: 12.10
Codename: quantal
bhaskar@
3.5.0-26-generic
lspci -nnk | grep -iA vga command is not working so i pasted without piped output.
bhaskar@
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: i915
Kernel modules: intelfb, i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:022f]
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:022f]
Kernel modules: i2c-i801
02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/
Subsystem: Dell Device [1028:022f]
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: r592
Kernel modules: r592
02:09.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: r852
Kernel modules: r852
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
Subsystem: Dell Device [1028:022f]
Kernel driver in use: sky2
Kernel modules: sky2
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1395 WLAN Mini-Card [1028:000b]
Kernel driver in use: wl
Kernel modules: wl, ssb
bhaskar@
ubuntu
bhaskar@
[sudo] password for bhaskar:
# dmidecode 2.11
SMBIOS 2.4 present.
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: Inspiron 1525
Version: Not Specified
Serial Number: 987T2BS
UUID: 44454C4C-
Wake-up Type: Power Switch
SKU Number: Not Specified
Family:
But this switching virtual terminals is working in other linux OS(OpenSUSE) of my laptop. But my working OS will be Ubuntu most of the time.
|
Revision history for this message
|
#4 |
Yes sorry , the correct command is
lspci -nnk | grep -iA2 vga (I forgot the number)
I cannot see any particular problem in the results. Your graphics card is Intel with i915 driver (same is in my Laptop).
How about PPAs ?
find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; cat -n "$1"' _ '{}' \;
and Xorg , any error there ?
cat /var/log/Xorg.0.log | grep -e EE -e WW
Regards
NikTh
|
Revision history for this message
|
#5 |
bhaskar@
/etc/apt/
1 # deb cdrom:[Ubuntu 12.10 _Quantal Quetzal_ - Release i386 (20121017.2)]/ quantal main restricted
2
3 # See http://
4 # newer versions of the distribution.
5 deb http://
6 deb-src http://
7
8 ## Major bug fix updates produced after the final release of the
9 ## distribution.
10 deb http://
11 deb-src http://
12
13 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
14 ## team. Also, please note that software in universe WILL NOT receive any
15 ## review or updates from the Ubuntu security team.
16 deb http://
17 deb-src http://
18 deb http://
19 deb-src http://
20
21 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
22 ## team, and may not be under a free licence. Please satisfy yourself as to
23 ## your rights to use the software. Also, please note that software in
24 ## multiverse WILL NOT receive any review or updates from the Ubuntu
25 ## security team.
26 deb http://
27 deb-src http://
28 deb http://
29 deb-src http://
30
31 ## N.B. software from this repository may not have been tested as
32 ## extensively as that contained in the main release, although it includes
33 ## newer versions of some applications which may provide useful features.
34 ## Also, please note that software in backports WILL NOT receive any review
35 ## or updates from the Ubuntu security team.
36 deb http://
37 deb-src http://
38
39 deb http://
40 deb-src http://
41 deb http://
42 deb-src http://
43 deb http://
44 deb-src http://
45
46 ## Uncomment the following two lines to add software from Canonical's
47 ## 'partner' repository.
48 ## This software is not part of Ubuntu, but is offered by Canonical and the
49 ## respective vendors as a service to Ubuntu users.
50 # deb http://
51 # deb-src http://
52
53 ## This software is not part of Ubuntu, but is offered by third-party
54 ## developers who want to ship their latest software.
55 deb http://
56 deb-src http://
/etc/apt/
1 # This file makes sure that Opera Browser is kept up-to-date
2 # as part of regular system upgrades
3
4 deb http://
5
6 # The line above will make sure you get all final public releases.
7 # Uncomment the following line if you want to get alpha and beta
8 # releases, too.
9
10 # deb http://
/etc/apt/
1 ### THIS FILE IS AUTOMATICALLY CONFIGURED ###
2 # You may comment out this entry, but any other modifications may be lost.
3 deb http://
/etc/apt/
1 deb http://
2 deb-src http://
/etc/apt/
1 ### THIS FILE IS AUTOMATICALLY CONFIGURED ###
2 # You may comment out this entry, but any other modifications may be lost.
3 deb http://
bhaskar@
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] (WW) The directory "/var/lib/
[ 12.776] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.924] (WW) Falling back to old probe method for vesa
[ 12.924] (WW) Falling back to old probe method for modesetting
[ 12.928] (WW) Falling back to old probe method for fbdev
|
Revision history for this message
|
#6 |
If you want investigate total X server log please look at following output.
bhaskar@
[ 12.674]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 12.674] X Protocol Version 11, Revision 0
[ 12.674] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 12.674] Current Operating System: Linux bhaskar-
[ 12.674] Kernel command line: BOOT_IMAGE=
[ 12.674] Build Date: 11 April 2013 12:55:37PM
[ 12.674] xorg-server 2:1.13.0-0ubuntu6.2 (For technical support please see http://
[ 12.674] Current version of pixman: 0.26.0
[ 12.674] Before reporting problems, check http://
to make sure that you have the latest version.
[ 12.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.674] (==) Log file: "/var/log/
[ 12.714] (==) Using system config directory "/usr/share/
[ 12.714] (==) No Layout section. Using the first Screen section.
[ 12.714] (==) No screen section available. Using defaults.
[ 12.714] (**) |-->Screen "Default Screen Section" (0)
[ 12.714] (**) | |-->Monitor "<default monitor>"
[ 12.715] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.715] (==) Automatically adding devices
[ 12.715] (==) Automatically enabling devices
[ 12.715] (==) Automatically adding GPU devices
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] Entry deleted from font path.
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] Entry deleted from font path.
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] Entry deleted from font path.
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] Entry deleted from font path.
[ 12.715] (WW) The directory "/usr/share/
[ 12.715] Entry deleted from font path.
[ 12.715] (WW) The directory "/var/lib/
[ 12.715] Entry deleted from font path.
[ 12.715] (==) FontPath set to:
/usr/share/
/usr/share/
built-ins
[ 12.715] (==) ModulePath set to "/usr/lib/
[ 12.715] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.715] (II) Loader magic: 0xb7783640
[ 12.715] (II) Module ABI versions:
[ 12.715] X.Org ANSI C Emulation: 0.4
[ 12.715] X.Org Video Driver: 13.0
[ 12.715] X.Org XInput driver : 18.0
[ 12.715] X.Org Server Extension : 7.0
[ 12.715] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12.775] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/
[ 12.775] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 12.776] (II) Open ACPI successful (/var/run/
[ 12.776] Initializing built-in extension Generic Event Extension
[ 12.776] Initializing built-in extension SHAPE
[ 12.776] Initializing built-in extension MIT-SHM
[ 12.776] Initializing built-in extension XInputExtension
[ 12.776] Initializing built-in extension XTEST
[ 12.776] Initializing built-in extension BIG-REQUESTS
[ 12.776] Initializing built-in extension SYNC
[ 12.776] Initializing built-in extension XKEYBOARD
[ 12.776] Initializing built-in extension XC-MISC
[ 12.776] Initializing built-in extension SECURITY
[ 12.776] Initializing built-in extension XINERAMA
[ 12.776] Initializing built-in extension XFIXES
[ 12.776] Initializing built-in extension RENDER
[ 12.776] Initializing built-in extension RANDR
[ 12.776] Initializing built-in extension COMPOSITE
[ 12.776] Initializing built-in extension DAMAGE
[ 12.776] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.776] Initializing built-in extension DOUBLE-BUFFER
[ 12.776] Initializing built-in extension RECORD
[ 12.776] Initializing built-in extension DPMS
[ 12.776] Initializing built-in extension X-Resource
[ 12.776] Initializing built-in extension XVideo
[ 12.776] Initializing built-in extension XVideo-
[ 12.776] Initializing built-in extension XFree86-
[ 12.776] Initializing built-in extension XFree86-DGA
[ 12.776] Initializing built-in extension XFree86-DRI
[ 12.776] Initializing built-in extension DRI2
[ 12.776] (II) LoadModule: "glx"
[ 12.916] (II) Loading /usr/lib/
[ 12.916] (II) Module glx: vendor="X.Org Foundation"
[ 12.916] compiled for 1.13.0, module version = 1.0.0
[ 12.916] ABI class: X.Org Server Extension, version 7.0
[ 12.916] (==) AIGLX enabled
[ 12.916] Loading extension GLX
[ 12.916] (==) Matched intel as autoconfigured driver 0
[ 12.916] (==) Matched intel as autoconfigured driver 1
[ 12.916] (==) Matched vesa as autoconfigured driver 2
[ 12.916] (==) Matched modesetting as autoconfigured driver 3
[ 12.916] (==) Matched fbdev as autoconfigured driver 4
[ 12.916] (==) Assigned the driver to the xf86ConfigLayout
[ 12.916] (II) LoadModule: "intel"
[ 12.917] (II) Loading /usr/lib/
[ 12.917] (II) Module intel: vendor="X.Org Foundation"
[ 12.917] compiled for 1.13.0, module version = 2.20.9
[ 12.917] Module class: X.Org Video Driver
[ 12.917] ABI class: X.Org Video Driver, version 13.0
[ 12.917] (II) LoadModule: "vesa"
[ 12.917] (II) Loading /usr/lib/
[ 12.917] (II) Module vesa: vendor="X.Org Foundation"
[ 12.917] compiled for 1.12.99.902, module version = 2.3.2
[ 12.917] Module class: X.Org Video Driver
[ 12.917] ABI class: X.Org Video Driver, version 13.0
[ 12.917] (II) LoadModule: "modesetting"
[ 12.917] (II) Loading /usr/lib/
[ 12.917] (II) Module modesetting: vendor="X.Org Foundation"
[ 12.918] compiled for 1.13.0, module version = 0.5.0
[ 12.918] Module class: X.Org Video Driver
[ 12.918] ABI class: X.Org Video Driver, version 13.0
[ 12.918] (II) LoadModule: "fbdev"
[ 12.918] (II) Loading /usr/lib/
[ 12.918] (II) Module fbdev: vendor="X.Org Foundation"
[ 12.918] compiled for 1.12.99.902, module version = 0.4.3
[ 12.918] Module class: X.Org Video Driver
[ 12.918] ABI class: X.Org Video Driver, version 13.0
[ 12.918] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 12.919] (II) VESA: driver for VESA chipsets: vesa
[ 12.919] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.919] (II) FBDEV: driver for framebuffer: fbdev
[ 12.919] (++) using VT number 8
[ 12.924] (II) intel(0): using device path '/dev/dri/card0'
[ 12.924] (WW) Falling back to old probe method for vesa
[ 12.924] (WW) Falling back to old probe method for modesetting
[ 12.928] (WW) Falling back to old probe method for fbdev
[ 12.928] (II) Loading sub module "fbdevhw"
[ 12.928] (II) LoadModule: "fbdevhw"
[ 12.928] (II) Loading /usr/lib/
[ 12.928] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.928] compiled for 1.13.0, module version = 0.0.2
[ 12.928] ABI class: X.Org Video Driver, version 13.0
[ 12.932] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.932] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.932] (==) intel(0): RGB weight 888
[ 12.932] (==) intel(0): Default visual is TrueColor
[ 12.932] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 12.932] (**) intel(0): Relaxed fencing enabled
[ 12.932] (**) intel(0): Wait on SwapBuffers? enabled
[ 12.932] (**) intel(0): Triple buffering? enabled
[ 12.932] (**) intel(0): Framebuffer tiled
[ 12.932] (**) intel(0): Pixmaps tiled
[ 12.932] (**) intel(0): 3D buffers tiled
[ 12.932] (**) intel(0): SwapBuffers wait enabled
[ 12.932] (==) intel(0): video overlay key set to 0x101fe
[ 12.932] (II) intel(0): Output LVDS1 has no monitor section
[ 12.934] (--) intel(0): found backlight control interface /sys/class/
[ 12.956] (II) intel(0): Output VGA1 has no monitor section
[ 12.964] (II) intel(0): Output HDMI1 has no monitor section
[ 13.253] (II) intel(0): Output TV1 has no monitor section
[ 13.253] (II) intel(0): EDID for output LVDS1
[ 13.253] (II) intel(0): Manufacturer: SEC Model: 3358 Serial#: 0
[ 13.253] (II) intel(0): Year: 2008 Week: 0
[ 13.253] (II) intel(0): EDID Version: 1.3
[ 13.253] (II) intel(0): Digital Display Input
[ 13.253] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 13.253] (II) intel(0): Gamma: 2.20
[ 13.253] (II) intel(0): No DPMS capabilities specified
[ 13.253] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.253] (II) intel(0): First detailed timing is preferred mode
[ 13.253] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 13.253] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 13.253] (II) intel(0): Manufacturer's mask: 0
[ 13.253] (II) intel(0): Supported detailed timing:
[ 13.253] (II) intel(0): clock: 71.3 MHz Image Size: 331 x 207 mm
[ 13.253] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1424 h_border: 0
[ 13.253] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 834 v_border: 0
[ 13.253] (II) intel(0): Unknown vendor-specific block f
[ 13.253] (II) intel(0): X949H
[ 13.253] (II) intel(0): &6@Gj�
[ 13.253] (II) intel(0): EDID (in hex):
[ 13.253] (II) intel(0): 00ffffffffffff0
[ 13.253] (II) intel(0): 001201038021157
[ 13.253] (II) intel(0): 275054000000010
[ 13.253] (II) intel(0): 010101010101d61
[ 13.253] (II) intel(0): 13004bcf1000001
[ 13.253] (II) intel(0): 000000000023870
[ 13.253] (II) intel(0): 393439480031353
[ 13.253] (II) intel(0): 00263640476a8fc
[ 13.253] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 13.253] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.253] (II) intel(0): Printing probed modes for output LVDS1
[ 13.253] (II) intel(0): Modeline "1280x800"x60.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 13.253] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 13.253] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 13.253] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 13.253] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 13.276] (II) intel(0): EDID for output VGA1
[ 13.284] (II) intel(0): EDID for output HDMI1
[ 13.581] (II) intel(0): EDID for output TV1
[ 13.581] (II) intel(0): Output LVDS1 connected
[ 13.581] (II) intel(0): Output VGA1 disconnected
[ 13.581] (II) intel(0): Output HDMI1 disconnected
[ 13.581] (II) intel(0): Output TV1 disconnected
[ 13.581] (II) intel(0): Using exact sizes for initial modes
[ 13.581] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 13.581] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.581] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.581] (==) intel(0): DPI set to (96, 96)
[ 13.581] (II) Loading sub module "fb"
[ 13.581] (II) LoadModule: "fb"
[ 13.581] (II) Loading /usr/lib/
[ 13.581] (II) Module fb: vendor="X.Org Foundation"
[ 13.581] compiled for 1.13.0, module version = 1.0.0
[ 13.581] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.581] (II) Loading sub module "dri2"
[ 13.581] (II) LoadModule: "dri2"
[ 13.581] (II) Module "dri2" already built-in
[ 13.581] (II) UnloadModule: "vesa"
[ 13.581] (II) Unloading vesa
[ 13.581] (II) UnloadModule: "modesetting"
[ 13.581] (II) Unloading modesetting
[ 13.581] (II) UnloadModule: "fbdev"
[ 13.581] (II) Unloading fbdev
[ 13.581] (II) UnloadSubModule: "fbdevhw"
[ 13.582] (II) Unloading fbdevhw
[ 13.582] (==) Depth 24 pixmap format is 32 bpp
[ 13.582] (II) intel(0): [DRI2] Setup complete
[ 13.582] (II) intel(0): [DRI2] DRI driver: i965
[ 13.582] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 13.593] (II) UXA(0): Driver registered support for the following operations:
[ 13.593] (II) solid
[ 13.593] (II) copy
[ 13.593] (II) composite (RENDER acceleration)
[ 13.593] (II) put_image
[ 13.594] (II) get_image
[ 13.594] (==) intel(0): Backing store disabled
[ 13.594] (==) intel(0): Silken mouse enabled
[ 13.594] (II) intel(0): Initializing HW Cursor
[ 13.594] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.597] (==) intel(0): DPMS enabled
[ 13.597] (==) intel(0): Intel XvMC decoder enabled
[ 13.597] (II) intel(0): Set up textured video
[ 13.597] (II) intel(0): Set up overlay video
[ 13.597] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 13.597] (II) intel(0): direct rendering: DRI2 Enabled
[ 13.597] (==) intel(0): hotplug detection: "enabled"
[ 13.619] (--) RandR disabled
[ 13.691] (II) AIGLX: enabled GLX_MESA_
[ 13.691] (II) AIGLX: enabled GLX_INTEL_
[ 13.691] (II) AIGLX: enabled GLX_ARB_
[ 13.691] (II) AIGLX: enabled GLX_ARB_
[ 13.691] (II) AIGLX: enabled GLX_EXT_
[ 13.691] (II) AIGLX: enabled GLX_SGI_
[ 13.691] (II) AIGLX: GLX_EXT_
[ 13.691] (II) AIGLX: Loaded and initialized i965
[ 13.691] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.691] (II) intel(0): Setting screen physical size to 338 x 211
[ 13.701] (II) XKB: reuse xkmfile /var/lib/
[ 13.704] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 13.704] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.704] (II) LoadModule: "evdev"
[ 13.705] (II) Loading /usr/lib/
[ 13.705] (II) Module evdev: vendor="X.Org Foundation"
[ 13.705] compiled for 1.13.0, module version = 2.7.3
[ 13.705] Module class: X.Org XInput Driver
[ 13.705] ABI class: X.Org XInput driver, version 18.0
[ 13.705] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.705] (**) Video Bus: always reports core events
[ 13.705] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 13.705] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.705] (--) evdev: Video Bus: Found keys
[ 13.705] (II) evdev: Video Bus: Configuring as keyboard
[ 13.705] (**) Option "config_info" "udev:/
[ 13.705] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 13.705] (**) Option "xkb_rules" "evdev"
[ 13.705] (**) Option "xkb_model" "pc105"
[ 13.705] (**) Option "xkb_layout" "us"
[ 13.706] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 13.706] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.706] (II) Using input driver 'evdev' for 'Power Button'
[ 13.706] (**) Power Button: always reports core events
[ 13.706] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 13.706] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.706] (--) evdev: Power Button: Found keys
[ 13.706] (II) evdev: Power Button: Configuring as keyboard
[ 13.706] (**) Option "config_info" "udev:/
[ 13.706] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13.706] (**) Option "xkb_rules" "evdev"
[ 13.706] (**) Option "xkb_model" "pc105"
[ 13.706] (**) Option "xkb_layout" "us"
[ 13.707] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 13.707] (II) No input driver specified, ignoring this device.
[ 13.707] (II) This device may have been added with another device file.
[ 13.707] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 13.707] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.707] (II) Using input driver 'evdev' for 'Sleep Button'
[ 13.707] (**) Sleep Button: always reports core events
[ 13.707] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 13.707] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 13.707] (--) evdev: Sleep Button: Found keys
[ 13.707] (II) evdev: Sleep Button: Configuring as keyboard
[ 13.707] (**) Option "config_info" "udev:/
[ 13.707] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 13.707] (**) Option "xkb_rules" "evdev"
[ 13.707] (**) Option "xkb_model" "pc105"
[ 13.707] (**) Option "xkb_layout" "us"
[ 13.707] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 13.708] (II) config/udev: Adding input device Laptop Integrated Webcam (/dev/input/event5)
[ 13.708] (**) Laptop Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 13.708] (II) Using input driver 'evdev' for 'Laptop Integrated Webcam'
[ 13.708] (**) Laptop Integrated Webcam: always reports core events
[ 13.708] (**) evdev: Laptop Integrated Webcam: Device: "/dev/input/event5"
[ 13.708] (--) evdev: Laptop Integrated Webcam: Vendor 0x5a9 Product 0x2640
[ 13.708] (--) evdev: Laptop Integrated Webcam: Found keys
[ 13.708] (II) evdev: Laptop Integrated Webcam: Configuring as keyboard
[ 13.708] (**) Option "config_info" "udev:/
[ 13.708] (II) XINPUT: Adding extended input device "Laptop Integrated Webcam" (type: KEYBOARD, id 9)
[ 13.708] (**) Option "xkb_rules" "evdev"
[ 13.708] (**) Option "xkb_model" "pc105"
[ 13.708] (**) Option "xkb_layout" "us"
[ 13.709] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event9)
[ 13.709] (II) No input driver specified, ignoring this device.
[ 13.709] (II) This device may have been added with another device file.
[ 13.709] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 13.709] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.709] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.709] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.709] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 13.709] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 13.709] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 13.709] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.709] (**) Option "config_info" "udev:/
[ 13.709] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 13.709] (**) Option "xkb_rules" "evdev"
[ 13.709] (**) Option "xkb_model" "pc105"
[ 13.709] (**) Option "xkb_layout" "us"
[ 13.710] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event6)
[ 13.710] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 13.710] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 13.710] (**) PS/2 Mouse: always reports core events
[ 13.710] (**) evdev: PS/2 Mouse: Device: "/dev/input/event6"
[ 13.710] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[ 13.710] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[ 13.710] (--) evdev: PS/2 Mouse: Found relative axes
[ 13.710] (--) evdev: PS/2 Mouse: Found x and y relative axes
[ 13.710] (II) evdev: PS/2 Mouse: Configuring as mouse
[ 13.710] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 13.710] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelIne
[ 13.710] (**) Option "config_info" "udev:/
[ 13.710] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 11)
[ 13.710] (II) evdev: PS/2 Mouse: initialized for relative axes.
[ 13.710] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 13.710] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 13.710] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 13.710] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 13.711] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 13.711] (II) No input driver specified, ignoring this device.
[ 13.711] (II) This device may have been added with another device file.
[ 13.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7)
[ 13.711] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 13.711] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 13.711] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 13.711] (II) LoadModule: "synaptics"
[ 13.711] (II) Loading /usr/lib/
[ 13.712] (II) Module synaptics: vendor="X.Org Foundation"
[ 13.712] compiled for 1.12.99.905, module version = 1.6.2
[ 13.712] Module class: X.Org XInput Driver
[ 13.712] ABI class: X.Org XInput driver, version 18.0
[ 13.712] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 13.712] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 13.712] (**) Option "Device" "/dev/input/event7"
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 13.712] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 13.712] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 13.712] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 13.712] (**) Option "config_info" "udev:/
[ 13.712] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 12)
[ 13.712] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 13.712] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 13.712] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 13.713] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 13.713] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 13.713] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 13.713] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 13.713] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 13.713] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 13.713] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 13.715] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event4)
[ 13.715] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 13.715] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 13.715] (**) Dell WMI hotkeys: always reports core events
[ 13.715] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event4"
[ 13.715] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 13.715] (--) evdev: Dell WMI hotkeys: Found keys
[ 13.715] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 13.715] (**) Option "config_info" "udev:/
[ 13.715] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 13.715] (**) Option "xkb_rules" "evdev"
[ 13.715] (**) Option "xkb_model" "pc105"
[ 13.716] (**) Option "xkb_layout" "us"
[ 13.721] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event9)
[ 13.721] (II) No input driver specified, ignoring this device.
[ 13.721] (II) This device may have been added with another device file.
[ 69.762] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 69.762] (II) intel(0): Printing DDC gathered Modelines:
[ 69.762] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 74.303] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 74.303] (II) intel(0): Printing DDC gathered Modelines:
[ 74.303] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 75.976] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 75.976] (II) intel(0): Printing DDC gathered Modelines:
[ 75.976] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 78.550] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 78.550] (II) intel(0): Printing DDC gathered Modelines:
[ 78.550] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 80.629] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 80.629] (II) intel(0): Printing DDC gathered Modelines:
[ 80.629] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 88.210] (II) XKB: reuse xkmfile /var/lib/
[ 94.291] (II) intel(0): EDID vendor "SEC", prod id 13144
[ 94.291] (II) intel(0): Printing DDC gathered Modelines:
[ 94.291] (II) intel(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
|
Revision history for this message
|
#7 |
Try this .. (because I smell a rat here.. with display manager)..
Hit CTRL+ALT+F1 and then try these commands to come back to GUI
sudo service lightdm stop
sudo service lightdm start
Regards
NikTh
|
Revision history for this message
|
#8 |
After restarting light display manager(lightdm) it is working properly. If the smell is because of lightdm then i will try with gdm and kdm those already sleeping in my laptop without doing any work. Anyway thanks for your prompt reply.
