Bug on ubuntu 12.10 beta2 64bit , wifi is connected but internet drops after about 2-3 minutes while wifi connection has full signal and is connected. I dont have similar problems in 12.04 version
Bug on ubuntu 12.10 beta2 64bit , wifi is connected but internet drops after about 2-3 minutes while wifi connection has full signal and is connected. I dont have similar problems in 12.04 version.
My wifi card is a usb LevelOne
Bus 002 Device 006: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter
I'm trying for example to ping a site and doesn't even find the address.
When i try to reconnect wifi connection i'm starting having internet connection and then drops again.
PS1: I wanted to enjoy ubuntu experience with my new Ati Radeon graphics card (nvidia geforce support sucks , at least on older graphics cards)
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Are there lots of wireless networks on the same channel around you?
Revision history for this message
|
#2 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
The methods in Unity are:
Press Control-ALT-T key combination.
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
Revision history for this message
|
#3 |
I don't have problems in any other ubuntu derivative or other distros.
This happens only on ubuntu 12.10 beta2
I'm connected to wifi but after some time while im still connected on wifi i dont have internet access.
Maybe its the new kernel ? routes ? i dont know
Revision history for this message
|
#4 |
Hi Mark, I have the same problem with 12.10, so below is the output I get from the commands you posted above. Hope this helps!
Nina
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
The following packages were automatically installed and are no longer required:
calligra-
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 64 not upgraded.
Need to get 777 kB of archives.
After this operation, 2,236 kB of additional disk space will be used.
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 777 kB in 1s (751 kB/s)
Selecting previously unselected package libhal1.
(Reading database ... 307067 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously unselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously unselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-8) ...
Setting up libhd16 (16.0-2.2) ...
Setting up hwinfo (16.0-2.2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: 82566MM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: eth0
version: 03
serial: 00:1c:25:b8:63:8c
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
resources: irq:44 memory:
*-network
description: Wireless interface
product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 61
serial: 00:21:5c:04:13:d5
width: 64 bits
clock: 33MHz
resources: irq:46 memory:
1: tpacpi_
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
6: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
wlan0 Scan completed :
Cell 01 - Address: E8:40:F2:B7:3F:48
Cell 02 - Address: 80:C6:AB:3A:A5:C5
Cell 03 - Address: C8:6C:87:EA:67:0E
Cell 04 - Address: 92:E6:BA:55:EF:23
Cell 05 - Address: 90:E6:BA:55:EF:20
Cell 06 - Address: 92:E6:BA:55:EF:21
Cell 07 - Address: 94:44:52:A3:3F:E6
Cell 08 - Address: 5C:B5:24:E4:F5:E7
Cell 09 - Address: B0:B2:DC:A7:40:FC
Cell 10 - Address: 92:E6:BA:55:EF:22
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4230] (rev 61)
Bus 002 Device 002: ID 17ef:4807 Lenovo UVC Camera
Bus 003 Device 002: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller
Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
H/W path Device Class Description
=======
/0 bus 647814G
/0/0 memory 128KiB BIOS
/0/6 processor Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz
/0/6/a memory 64KiB L1 cache
/0/6/c memory 4MiB L2 cache
/0/6/0.1 processor Logical CPU
/0/6/0.2 processor Logical CPU
/0/b memory 64KiB L1 cache
/0/25 memory 2GiB System Memory
/0/25/0 memory 1GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/25/1 memory 1GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/1 processor
/0/1/0.1 processor Logical CPU
/0/1/0.2 processor Logical CPU
/0/100 bridge Mobile PM965/GM965/GL960 Memory Controller Hub
/0/100/2 display Mobile GM965/GL960 Integrated Graphics Controller (primary)
/0/100/2.1 display Mobile GM965/GL960 Integrated Graphics Controller (secondary)
/0/100/19 eth0 network 82566MM Gigabit Network Connection
/0/100/1a bus 82801H (ICH8 Family) USB UHCI Controller #4
/0/100/1a.1 bus 82801H (ICH8 Family) USB UHCI Controller #5
/0/100/1a.7 bus 82801H (ICH8 Family) USB2 EHCI Controller #2
/0/100/1b multimedia 82801H (ICH8 Family) HD Audio Controller
/0/100/1c bridge 82801H (ICH8 Family) PCI Express Port 1
/0/100/1c.1 bridge 82801H (ICH8 Family) PCI Express Port 2
/0/100/1c.1/0 wlan0 network PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
/0/100/1c.2 bridge 82801H (ICH8 Family) PCI Express Port 3
/0/100/1d bus 82801H (ICH8 Family) USB UHCI Controller #1
/0/100/1d.1 bus 82801H (ICH8 Family) USB UHCI Controller #2
/0/100/1d.2 bus 82801H (ICH8 Family) USB UHCI Controller #3
/0/100/1d.7 bus 82801H (ICH8 Family) USB2 EHCI Controller #1
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge 82801HEM (ICH8M-E) LPC Interface Controller
/0/100/1f.1 storage 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
/0/100/1f.2 storage 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
/0/100/1f.3 bus 82801H (ICH8 Family) SMBus Controller
/0/2 scsi0 storage
/0/2/0.0.0 /dev/sda disk 64GB SAMSUNG MCCOE64G
/0/2/0.0.0/1 /dev/sda1 volume 20GiB Windows NTFS volume
/0/2/0.0.0/2 /dev/sda2 volume 38GiB Extended partition
/0/2/0.0.0/2/5 /dev/sda5 volume 37GiB Linux filesystem partition
/0/2/0.0.0/2/6 /dev/sda6 volume 1683MiB Linux swap / Solaris partition
/0/3 scsi3 storage
/0/3/0.0.0 /dev/cdrom disk DVD-RAM UJ-844
/1 power 42T4522
Linux Nina-ThinkPad-X300 3.5.0-16-generic #25-Ubuntu SMP Fri Sep 28 22:32:21 UTC 2012 i686 i686 i686 GNU/Linux
[ 721.161074] usb usb3: root hub lost power or was reset
[ 721.161138] usb usb4: root hub lost power or was reset
[ 721.161452] usb usb5: root hub lost power or was reset
[ 721.161505] usb usb6: root hub lost power or was reset
[ 721.161565] usb usb7: root hub lost power or was reset
[ 721.292508] PM: resume of drv:usb dev:2-5 complete after 129.140 msecs
[ 722.189476] usb 2-5: reset high-speed USB device number 2 using ehci_hcd
[ 722.189613] PM: resume of drv:usb dev:3-1 complete after 1026.118 msecs
[ 722.189638] PM: resume of drv:usb dev:3-2 complete after 1025.818 msecs
[ 722.432107] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 722.578727] btusb 3-1:1.0: no reset_resume for driver btusb?
[ 722.578731] btusb 3-1:1.1: no reset_resume for driver btusb?
[ 722.578986] PM: resume of drv:usb dev:3-1:1.0 complete after 1415.465 msecs
[ 722.579006] PM: resume of drv:usb dev:3-1:1.1 complete after 1415.388 msecs
[ 722.579009] PM: resume of drv:usb dev:3-1:1.3 complete after 1415.241 msecs
[ 722.579019] PM: resume of drv:usb dev:3-1:1.2 complete after 1415.323 msecs
[ 722.676105] usb 3-2: reset full-speed USB device number 3 using uhci_hcd
[ 722.825756] PM: resume of drv:usb dev:3-2:1.0 complete after 1661.910 msecs
[ 723.800607] IPv6: ADDRCONF(
[ 724.046713] IPv6: ADDRCONF(
[ 728.556237] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 728.566492] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 728.569659] wlan0: authenticated
[ 728.580058] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 728.583329] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=10)
[ 728.607339] wlan0: associated
[ 728.607681] IPv6: ADDRCONF(
[ 911.582144] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 913.962457] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 913.972703] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 913.975992] wlan0: authenticated
[ 913.988090] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 913.995691] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=10)
[ 914.019706] wlan0: associated
[ 1031.684228] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 1034.074095] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 1034.085225] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 1034.090796] wlan0: authenticated
[ 1034.104035] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 1034.111069] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=10)
[ 1034.136368] wlan0: associated
[ 1067.336238] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[ 1069.441135] usb usb3: root hub lost power or was reset
[ 1069.441199] usb usb4: root hub lost power or was reset
[ 1069.441513] usb usb5: root hub lost power or was reset
[ 1069.441566] usb usb6: root hub lost power or was reset
[ 1069.441627] usb usb7: root hub lost power or was reset
[ 1069.572124] PM: resume of drv:usb dev:2-5 complete after 129.158 msecs
[ 1070.428150] PM: resume of drv:usb dev:3-1 complete after 985.059 msecs
[ 1070.428176] PM: resume of drv:usb dev:3-2 complete after 984.757 msecs
[ 1070.484061] usb 2-5: reset high-speed USB device number 2 using ehci_hcd
[ 1070.728121] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 1070.874329] btusb 3-1:1.0: no reset_resume for driver btusb?
[ 1070.874332] btusb 3-1:1.1: no reset_resume for driver btusb?
[ 1070.874589] PM: resume of drv:usb dev:3-1:1.0 complete after 1431.478 msecs
[ 1070.874599] PM: resume of drv:usb dev:3-1:1.2 complete after 1431.306 msecs
[ 1070.874603] PM: resume of drv:usb dev:3-1:1.1 complete after 1431.392 msecs
[ 1070.874616] PM: resume of drv:usb dev:3-1:1.3 complete after 1431.255 msecs
[ 1070.972115] usb 3-2: reset full-speed USB device number 3 using uhci_hcd
[ 1071.121356] PM: resume of drv:usb dev:3-2:1.0 complete after 1677.908 msecs
[ 1072.076649] IPv6: ADDRCONF(
[ 1072.311318] IPv6: ADDRCONF(
[ 1076.879472] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 1076.883353] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 1076.885848] wlan0: authenticated
[ 1076.892649] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 1076.896832] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 1076.915750] wlan0: associated
[ 1076.916121] IPv6: ADDRCONF(
[ 1194.149989] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[ 1203.752049] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 1203.755408] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 1203.758710] wlan0: authenticated
[ 1203.768064] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 1203.771399] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 1203.783718] wlan0: associated
[ 1781.999734] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[ 1784.165159] usb usb3: root hub lost power or was reset
[ 1784.165224] usb usb4: root hub lost power or was reset
[ 1784.165538] usb usb5: root hub lost power or was reset
[ 1784.165592] usb usb6: root hub lost power or was reset
[ 1784.165652] usb usb7: root hub lost power or was reset
[ 1784.296598] PM: resume of drv:usb dev:2-5 complete after 129.278 msecs
[ 1785.180072] PM: resume of drv:usb dev:3-1 complete after 1012.621 msecs
[ 1785.180100] PM: resume of drv:usb dev:3-2 complete after 1012.310 msecs
[ 1785.236054] usb 2-5: reset high-speed USB device number 2 using ehci_hcd
[ 1785.480118] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 1785.626688] btusb 3-1:1.0: no reset_resume for driver btusb?
[ 1785.626691] btusb 3-1:1.1: no reset_resume for driver btusb?
[ 1785.626951] PM: resume of drv:usb dev:3-1:1.0 complete after 1459.473 msecs
[ 1785.626967] PM: resume of drv:usb dev:3-1:1.1 complete after 1459.387 msecs
[ 1785.626971] PM: resume of drv:usb dev:3-1:1.3 complete after 1459.233 msecs
[ 1785.626981] PM: resume of drv:usb dev:3-1:1.2 complete after 1459.318 msecs
[ 1785.724111] usb 3-2: reset full-speed USB device number 3 using uhci_hcd
[ 1785.873715] PM: resume of drv:usb dev:3-2:1.0 complete after 1705.897 msecs
[ 1787.056888] IPv6: ADDRCONF(
[ 1787.304376] IPv6: ADDRCONF(
[ 1791.830485] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 1791.835760] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 1792.036037] wlan0: send auth to e8:40:f2:b7:3f:48 (try 2/3)
[ 1792.051075] wlan0: authenticated
[ 1792.064060] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 1792.070527] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 1792.096948] wlan0: associated
[ 1792.097428] IPv6: ADDRCONF(
[ 3589.122804] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 3591.482264] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 3591.492123] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 3591.496097] wlan0: authenticated
[ 3591.508036] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 3591.511329] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 3591.535358] wlan0: associated
[ 3829.126788] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 3831.487895] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 3831.496695] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 3831.499486] wlan0: authenticated
[ 3831.512051] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 3831.515393] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 3831.537723] wlan0: associated
[ 4909.145909] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 4911.483576] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 4911.492661] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 4911.495449] wlan0: authenticated
[ 4911.508199] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 4911.511507] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 4911.535543] wlan0: associated
[ 4987.766314] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[ 4990.198056] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 4990.207191] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 4990.212166] wlan0: authenticated
[ 4990.228042] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 4990.231345] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 4990.255727] wlan0: associated
[ 5025.251059] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[ 5028.369153] usb usb3: root hub lost power or was reset
[ 5028.369217] usb usb4: root hub lost power or was reset
[ 5028.369534] usb usb5: root hub lost power or was reset
[ 5028.369588] usb usb6: root hub lost power or was reset
[ 5028.369649] usb usb7: root hub lost power or was reset
[ 5028.500114] PM: resume of drv:usb dev:2-5 complete after 128.828 msecs
[ 5029.366113] PM: resume of drv:usb dev:3-1 complete after 994.703 msecs
[ 5029.366152] PM: resume of drv:usb dev:3-2 complete after 994.412 msecs
[ 5029.420073] usb 2-5: reset high-speed USB device number 2 using ehci_hcd
[ 5029.664128] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 5029.810378] btusb 3-1:1.0: no reset_resume for driver btusb?
[ 5029.810381] btusb 3-1:1.1: no reset_resume for driver btusb?
[ 5029.810643] PM: resume of drv:usb dev:3-1:1.3 complete after 1438.952 msecs
[ 5029.810647] PM: resume of drv:usb dev:3-1:1.0 complete after 1439.207 msecs
[ 5029.810652] PM: resume of drv:usb dev:3-1:1.2 complete after 1439.037 msecs
[ 5029.810663] PM: resume of drv:usb dev:3-1:1.1 complete after 1439.126 msecs
[ 5029.908134] usb 3-2: reset full-speed USB device number 3 using uhci_hcd
[ 5030.057528] PM: resume of drv:usb dev:3-2:1.0 complete after 1685.762 msecs
[ 5030.480061] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 5030.648374] usb 4-1: New USB device found, idVendor=15ca, idProduct=00c3
[ 5030.648386] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5030.648393] usb 4-1: Product: USB Optical Mouse
[ 5030.708546] usbcore: registered new interface driver usbhid
[ 5030.708553] usbhid: USB HID core driver
[ 5030.721424] input: USB Optical Mouse as /devices/
[ 5030.721791] hid-generic 0003:15CA:
[ 5031.056687] IPv6: ADDRCONF(
[ 5031.324949] IPv6: ADDRCONF(
[ 5035.843117] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 5035.852419] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 5035.856327] wlan0: authenticated
[ 5035.869178] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 5035.872436] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 5035.899030] wlan0: associated
[ 5035.899506] IPv6: ADDRCONF(
[ 7148.708980] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 7151.074466] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 7151.087498] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 7151.095747] wlan0: authenticated
[ 7151.108045] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 7151.111372] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 7151.135245] wlan0: associated
[ 7254.422267] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 7254.432320] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 7254.435023] wlan0: authenticated
[ 7254.448053] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 7254.451526] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 7254.475310] wlan0: associated
[ 7493.488139] usb 4-1: USB disconnect, device number 2
[ 7493.756042] usb 4-1: new low-speed USB device number 3 using uhci_hcd
[ 7493.925063] usb 4-1: New USB device found, idVendor=15ca, idProduct=00c3
[ 7493.925071] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7493.925076] usb 4-1: Product: USB Optical Mouse
[ 7493.944341] input: USB Optical Mouse as /devices/
[ 7493.944548] hid-generic 0003:15CA:
[ 7508.714994] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 7511.107291] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 7511.115981] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 7511.120464] wlan0: authenticated
[ 7511.132038] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 7511.135328] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 7511.158206] wlan0: associated
[ 7748.718945] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[ 7751.065093] wlan0: authenticate with e8:40:f2:b7:3f:48
[ 7751.076051] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[ 7751.081388] wlan0: authenticated
[ 7751.092041] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[ 7751.095368] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[ 7751.120076] wlan0: associated
[13268.812299] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[13271.138526] wlan0: authenticate with e8:40:f2:b7:3f:48
[13271.147244] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[13271.152207] wlan0: authenticated
[13271.164044] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[13271.167358] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[13271.195039] wlan0: associated
[15561.920116] usb 4-1: USB disconnect, device number 3
[17392.248001] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[17394.703169] wlan0: authenticate with e8:40:f2:b7:3f:48
[17394.712191] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[17394.714902] wlan0: authenticated
[17394.728041] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[17394.731354] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[17394.755348] wlan0: associated
[17482.828679] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[17485.610469] wlan0: authenticate with e8:40:f2:b7:3f:48
[17485.619186] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[17485.621620] wlan0: authenticated
[17485.632038] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[17485.635499] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[17485.659142] wlan0: associated
[20346.895064] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[20350.111031] wlan0: authenticate with e8:40:f2:b7:3f:48
[20350.119699] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[20350.121718] wlan0: authenticated
[20350.132037] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[20350.135347] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[20350.159652] wlan0: associated
[23229.156073] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23231.551624] wlan0: authenticate with e8:40:f2:b7:3f:48
[23231.561648] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23231.577007] wlan0: authenticated
[23231.592064] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23231.595703] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23231.625820] wlan0: associated
[23238.663296] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[23241.232477] wlan0: authenticate with e8:40:f2:b7:3f:48
[23241.243364] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23241.247072] wlan0: authenticated
[23241.256063] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23241.262433] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23241.284161] wlan0: associated
[23349.157107] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23351.509180] wlan0: authenticate with e8:40:f2:b7:3f:48
[23351.517941] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23351.527905] wlan0: authenticated
[23351.540057] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23351.543389] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23351.568561] wlan0: associated
[23469.159284] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23471.514411] wlan0: authenticate with e8:40:f2:b7:3f:48
[23471.523137] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23471.526506] wlan0: authenticated
[23471.536305] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23471.539623] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23471.563336] wlan0: associated
[23589.265393] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23598.760114] wlan0: authenticate with e8:40:f2:b7:3f:48
[23598.770550] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23598.791397] wlan0: authenticated
[23598.800582] wlan0: waiting for beacon from e8:40:f2:b7:3f:48
[23598.884058] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23598.890169] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23598.915433] wlan0: associated
[23829.165783] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23838.786593] wlan0: authenticate with e8:40:f2:b7:3f:48
[23838.793571] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23838.808142] wlan0: authenticated
[23838.820058] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23838.828015] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23838.850197] wlan0: associated
[23844.219827] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[23849.279620] wlan0: authenticate with e8:40:f2:b7:3f:48
[23849.287422] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23849.290636] wlan0: authenticated
[23849.304073] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23849.307371] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23849.341746] wlan0: associated
[23949.173734] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[23951.541517] wlan0: authenticate with e8:40:f2:b7:3f:48
[23951.549461] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[23951.555086] wlan0: authenticated
[23951.568063] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[23951.571384] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[23951.595442] wlan0: associated
[24429.178379] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[24438.722689] wlan0: authenticate with e8:40:f2:b7:3f:48
[24438.731471] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[24438.739673] wlan0: authenticated
[24438.748049] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[24438.754307] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[24438.778808] wlan0: associated
[24444.055056] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[24449.301484] wlan0: authenticate with e8:40:f2:b7:3f:48
[24449.308684] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[24449.313982] wlan0: authenticated
[24449.324340] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[24449.332534] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[24449.355151] wlan0: associated
[24552.446738] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[24554.820390] wlan0: authenticate with e8:40:f2:b7:3f:48
[24554.829029] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[24554.833558] wlan0: authenticated
[24554.844049] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[24554.849957] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[24554.873846] wlan0: associated
[25233.852895] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[25236.216784] wlan0: authenticate with e8:40:f2:b7:3f:48
[25236.225200] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[25236.227292] wlan0: authenticated
[25236.240058] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[25236.243362] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[25236.267210] wlan0: associated
[25509.261402] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[25511.591828] wlan0: authenticate with e8:40:f2:b7:3f:48
[25511.600651] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[25511.607989] wlan0: authenticated
[25511.616198] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[25511.621190] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[25511.643412] wlan0: associated
[27069.288626] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[27071.657368] wlan0: authenticate with e8:40:f2:b7:3f:48
[27071.666225] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27071.677130] wlan0: authenticated
[27071.688069] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27071.692367] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27071.716089] wlan0: associated
[27082.146284] wlan0: disassociating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27082.172082] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27085.221694] IPv6: ADDRCONF(
[27090.268907] wlan0: authenticate with e8:40:f2:b7:3f:48
[27090.277992] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27090.280638] wlan0: authenticated
[27090.292072] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27090.295393] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27090.319710] wlan0: associated
[27090.320216] IPv6: ADDRCONF(
[27145.217420] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27150.290146] wlan0: authenticate with e8:40:f2:b7:3f:48
[27150.298954] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27150.302148] wlan0: authenticated
[27150.312044] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27150.315377] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27150.339686] wlan0: associated
[27189.284871] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[27191.648232] wlan0: authenticate with e8:40:f2:b7:3f:48
[27191.658468] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27191.661805] wlan0: authenticated
[27191.672032] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27191.675375] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27191.702609] wlan0: associated
[27309.227096] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[27311.590927] wlan0: authenticate with e8:40:f2:b7:3f:48
[27311.599714] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27311.605141] wlan0: authenticated
[27311.616058] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27311.619390] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27311.643651] wlan0: associated
[27542.925907] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27545.288700] wlan0: authenticate with e8:40:f2:b7:3f:48
[27545.297492] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27545.299459] wlan0: authenticated
[27545.312038] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27545.315341] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27545.339440] wlan0: associated
[27638.201242] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27640.995058] wlan0: authenticate with e8:40:f2:b7:3f:48
[27641.003743] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27641.007095] wlan0: authenticated
[27641.016166] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27641.019492] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27641.043051] wlan0: associated
[27669.143188] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[27671.483676] wlan0: authenticate with e8:40:f2:b7:3f:48
[27671.493229] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27671.495749] wlan0: authenticated
[27671.508054] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27671.511372] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27671.536848] wlan0: associated
[27700.323264] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27702.749735] wlan0: authenticate with e8:40:f2:b7:3f:48
[27702.758465] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27702.761498] wlan0: authenticated
[27702.772036] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27702.775344] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27702.798919] wlan0: associated
[27789.159511] wlan0: deauthenticated from e8:40:f2:b7:3f:48 (Reason: 16)
[27791.474731] wlan0: authenticate with e8:40:f2:b7:3f:48
[27791.484326] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27791.495293] wlan0: authenticated
[27791.508044] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27791.511356] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27791.537410] wlan0: associated
[27798.818156] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[27801.206008] wlan0: authenticate with 5c:b5:24:e4:f5:e7
[27801.214775] wlan0: send auth to 5c:b5:24:e4:f5:e7 (try 1/3)
[27801.217944] wlan0: authenticated
[27801.228040] wlan0: associate with 5c:b5:24:e4:f5:e7 (try 1/3)
[27801.231091] wlan0: RX AssocResp from 5c:b5:24:e4:f5:e7 (capab=0x431 status=0 aid=1)
[27801.254684] wlan0: associated
[27963.273911] wlan0: deauthenticating from 5c:b5:24:e4:f5:e7 by local choice (reason=3)
[27965.946632] wlan0: authenticate with e8:40:f2:b7:3f:48
[27965.955386] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[27965.957507] wlan0: authenticated
[27965.968654] wlan0: waiting for beacon from e8:40:f2:b7:3f:48
[27965.992057] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[27965.996340] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[27966.020684] wlan0: associated
[28037.751936] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[28041.041814] wlan0: authenticate with e8:40:f2:b7:3f:48
[28041.054659] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[28041.056628] wlan0: authenticated
[28041.072051] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[28041.075386] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[28041.098549] wlan0: associated
[28080.236086] wlan0: deauthenticating from e8:40:f2:b7:3f:48 by local choice (reason=3)
[28087.553951] wlan0: authenticate with e8:40:f2:b7:3f:48
[28087.563012] wlan0: send auth to e8:40:f2:b7:3f:48 (try 1/3)
[28087.567677] wlan0: authenticated
[28087.580037] wlan0: associate with e8:40:f2:b7:3f:48 (try 1/3)
[28087.583332] wlan0: RX AssocResp from e8:40:f2:b7:3f:48 (capab=0x411 status=0 aid=6)
[28087.609337] wlan0: associated
Release Date: 05/07/2008
Manufacturer: LENOVO
Product Name: 647814G
Serial Number: L3C1882
Manufacturer: LENOVO
Product Name: 647814G
Serial Number: VF1GY85K07W
Manufacturer: LENOVO
Serial Number: Not Available
Manufacturer: GenuineIntel
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
Manufacturer: SANYO
SBDS Serial Number: 0032
SBDS Manufacture Date: 2008-05-29
wlan0 IEEE 802.11abgn ESSID:"UPC754011"
Bit Rate=58.5 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=50/70 Signal level=-60 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:29 Missed beacon:0
lo no wireless extensions.
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 16181: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
11: PCI 19.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.QgxdHTFew92
SysFS ID: /devices/
SysFS BusID: 0000:00:19.0
Hardware Class: network
Model: "Lenovo ThinkPad T61"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1049 "82566MM Gigabit Network Connection"
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x20b9 "ThinkPad T61"
Revision: 0x03
Driver: "e1000e"
Driver Modules: "e1000e"
Device File: eth0
Memory Range: 0xfa200000-
Memory Range: 0xfa225000-
I/O Ports: 0x1840-0x185f (rw)
IRQ: 44 (6258 events)
HW Address: 00:1c:25:b8:63:8c
Link detected: no
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: e1000e is active
Driver Activation Cmd: "modprobe e1000e"
Config Status: cfg=new, avail=yes, need=no, active=unknown
28: PCI 300.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.146MqY+fkf3
Parent ID: qTvu.czCARouY8b4
SysFS ID: /devices/
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Intel Lenovo ThinkPad T61"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4230 "PRO/Wireless 4965 AG or AGN [Kedron] Network Connection"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1111 "Lenovo ThinkPad T61"
Revision: 0x61
Driver: "iwl4965"
Driver Modules: "iwl4965"
Device File: wlan0
Features: WLAN
Memory Range: 0xf9f00000-
IRQ: 46 (1785560 events)
HW Address: 00:21:5c:04:13:d5
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: iwl4965 is active
Driver Activation Cmd: "modprobe iwl4965"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
warning: bad ps syntax, perhaps a bogus '-'?
See http://
root 807 0.0 0.2 34656 4960 ? Ssl Oct02 0:08 NetworkManager
root 1140 0.0 0.0 6112 1512 ? Ss Oct02 0:02 /sbin/wpa_
nobody 1723 0.0 0.0 5448 1148 ? S Oct02 0:01 /usr/sbin/dnsmasq --no-resolv --keep-
root 16094 0.0 0.1 5472 3132 ? S 15:06 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
root 16132 0.0 0.1 8064 2312 ? S 15:06 0:00 /usr/lib/
root 16134 0.0 0.0 2124 536 ? S 15:06 0:00 run-parts /etc/network/
nina 16195 0.0 0.0 4376 820 pts/2 S+ 15:06 0:00 egrep --color=auto wpa|icd|etwork
Module Size Used by
hid_generic 12445 0
usbhid 41702 0
hid 82142 2 hid_generic,usbhid
joydev 17161 0
rfcomm 37276 12
parport_pc 31968 0
bnep 17707 2
coretemp 13168 0
ppdev 12817 0
kvm 357806 0
snd_hda_
arc4 12473 2
binfmt_misc 17260 1
thinkpad_acpi 69337 0
snd_seq_midi 13132 0
psmouse 84843 0
snd_rawmidi 25382 1 snd_seq_midi
microcode 18209 0
uvcvideo 71277 0
videobuf2_core 32070 1 uvcvideo
snd_seq_midi_event 14475 1 snd_seq_midi
videodev 95841 2 uvcvideo,
videobuf2_vmalloc 12756 1 uvcvideo
videobuf2_memops 13184 1 videobuf2_vmalloc
snd_hda_intel 32515 2
snd_seq 51255 2 snd_seq_
snd_hda_codec 111547 2 snd_hda_
serio_raw 13031 0
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 80163 2 snd_hda_
lpc_ich 16925 0
iwl4965 106888 0
snd_seq_device 14137 3 snd_seq_
iwlegacy 87736 1 iwl4965
snd_timer 24411 2 snd_seq,snd_pcm
snd_page_alloc 14036 2 snd_hda_
mac80211 461161 2 iwl4965,iwlegacy
snd 61991 14 snd_hda_
cfg80211 175375 3 iwl4965,
btusb 17950 0
bluetooth 183228 22 rfcomm,bnep,btusb
tpm_tis 18208 0
soundcore 14599 1 snd
nvram 13986 1 thinkpad_acpi
i915 457050 3
drm_kms_helper 45271 1 i915
drm 230463 4 i915,drm_kms_helper
mac_hid 13037 0
i2c_algo_bit 13197 1 i915
video 18847 1 i915
lp 13299 0
parport 40753 3 parport_pc,ppdev,lp
e1000e 174645 0
Revision history for this message
|
#5 |
Try:
echo "nameserver 8.8.8.8" | sudo tee /etc/resolvconf
Reboot to test
Revision history for this message
|
#6 |
Yes that seems to have solved it, thanks so much!
Revision history for this message
|
#7 |
your interface has an IP, you were just failing DNS.
Revision history for this message
|
#8 |
I have the same problem following this https:/
here are my output
~$ sudo lshw -C network;
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:07:00.0
logical name: wlan0
version: 01
serial: cc:af:78:b9:9a:49
width: 64 bits
clock: 33MHz
resources: irq:16 memory:
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:13:00.0
logical name: eth0
version: 06
serial: 78:84:3c:e8:58:38
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:42 ioport:
~$ rfkill list;
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: sony-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
2: sony-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
~$ sudo iwlist scanning;
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
wlan0 No scan results
~$ cat /etc/network/
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
~$ cat /etc/lsb-release;
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
~$ lspci -nn;
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4)
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1055] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GF119 HDMI Audio Controller [10de:0e08] (rev a1)
07:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
0d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
~$ lsusb;
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:6436 Microdia
Bus 001 Device 004: ID 0489:e027 Foxconn / Hon Hai
~$ sudo lshw -short;
H/W path Device Class Description
=======
/0 bus VAIO
/0/0 memory 1MiB BIOS
/0/7 memory 8GiB System Memory
/0/7/0 memory 4GiB SODIMM DDR3
/0/7/1 memory 4GiB SODIMM DDR3
/0/d processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz
/0/d/e memory 128KiB L1 cache
/0/d/f memory 512KiB L2 cache
/0/d/10 memory 3MiB L3 cache
/0/100 bridge 2nd Generation Core Processor Family DRAM Controller
/0/100/1 bridge Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
/0/100/1/0 display NVIDIA Corporation
/0/100/1/0.1 multimedia GF119 HDMI Audio Controller
/0/100/16 communication 6 Series/C200 Series Chipset Family MEI Controller #1
/0/100/1a bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
/0/100/1b multimedia 6 Series/C200 Series Chipset Family High Definition Audio Controller
/0/100/1c bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 1
/0/100/1c/0 wlan0 network AR9285 Wireless Network Adapter (PCI-Express)
/0/100/1c.3 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 4
/0/100/1c.3/0 scsi6 generic RTS5209 PCI Express Card Reader
/0/100/1c.3/0/0.0.0 /dev/sdb disk SCSI Disk
/0/100/1c.5 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 6
/0/100/1c.5/0 eth0 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/1d bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
/0/100/1f bridge HM65 Express Chipset Family LPC Controller
/0/100/1f.2 storage 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
/0/100/1f.3 bus 6 Series/C200 Series Chipset Family SMBus Controller
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 640GB SAMSUNG HM641JI
/0/1/0.0.0/1 /dev/sda1 volume 12GiB Windows NTFS volume
/0/1/0.0.0/2 /dev/sda2 volume 100MiB Windows NTFS volume
/0/1/0.0.0/3 /dev/sda3 volume 83GiB Windows NTFS volume
/0/1/0.0.0/4 /dev/sda4 volume 499GiB Extended partition
/0/1/0.0.0/4/5 /dev/sda5 volume 11GiB Linux filesystem partition
/0/1/0.0.0/4/6 /dev/sda6 volume 1953MiB Linux swap / Solaris partition
/0/1/0.0.0/4/7 /dev/sda7 volume 486GiB Linux filesystem partition
/0/2 scsi3 storage
/0/2/0.0.0 /dev/cdrom disk CDDVDW TS-L633F
~# uname -a;
Linux VPCEH1S1E 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
~$ dmesg | egrep 'acx|at76|
[] No AGP bridge found
[] found SMP MP-table at [mem 0x000fe1b0-
[] No NUMA configuration found
[] No AGP bridge found
[] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[] ACPI: No dock devices found.
[] ACPI: bus type usb registered
[] usbcore: registered new interface driver usbfs
[] usbcore: registered new interface driver hub
[] usbcore: registered new device driver usb
[] Switching to clocksource hpet
[] pnp: PnP ACPI: found 12 devices
[] input: Lid Switch as /devices/
[] ACPI: Lid Switch [LID0]
[] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[] usb usb1: >Product: EHCI Host Controller
[] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[] usb usb1: >SerialNumber: 0000:00:1a.0
[] hub 1-0:1.0: >USB hub found
[] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[] usb usb2: >Product: EHCI Host Controller
[] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[] usb usb2: >SerialNumber: 0000:00:1d.0
[] hub 2-0:1.0: >USB hub found
[] usbcore: registered new interface driver libusual
[] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[] hub 1-1:1.0: >USB hub found
[] r8169 0000:13:00.0: >eth0: RTL8168e/8111e at 0xffffc90000c34000, 78:84:3c:e8:58:38, XID 0c200000 IRQ 42
[] r8169 0000:13:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[] hub 2-1:1.0: >USB hub found
[] usb 1-1.2: >new high-speed USB device number 3 using ehci_hcd
[] usb 1-1.2: >New USB device found, idVendor=0c45, idProduct=6436
[] usb 1-1.2: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
[] usb 1-1.2: >Product: Sony Visual Communication Camera
[] usb 1-1.2: >Manufacturer: LOEAAI10P2SF018
[] Switching to clocksource tsc
[] IPv6: ADDRCONF(
[] lp: driver loaded but no devices found
[] ath: EEPROM regdomain: 0x65
[] ath: EEPROM indicates we should expect a direct regpair map
[] ath: Country alpha2 being used: 00
[] ath: Regpair used: 0x65
[] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[] lpc_ich: Resource conflict(s) found affecting gpio_ich
[] ieee80211 phy0: >Selected rate control algorithm 'ath9k_
[] Registered led device: ath9k-phy0
[] hda_codec: CX20590: BIOS auto-probing.
[] input: HDA Intel PCH Mic as /devices/
[] input: HDA Intel PCH Headphone as /devices/
[] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[] uvcvideo: Found UVC 1.00 device Sony Visual Communication Camera (0c45:6436)
[] input: Sony Visual Communication Camer as /devices/
[] usbcore: registered new interface driver uvcvideo
[] input: HDA NVidia HDMI/DP,pcm=3 as /devices/
[] IPv6: ADDRCONF(
[] IPv6: ADDRCONF(
[] r8169 0000:13:00.0: >eth0: link down
[] IPv6: ADDRCONF(
[] IPv6: ADDRCONF(
[] vboxdrv: Found 4 processor cores.
[] vboxpci: IOMMU not found (not registered)
[] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[] wlan0: authenticate with 00:19:70:83:d5:6f
[] wlan0: send auth to 00:19:70:83:d5:6f (try 1/3)
[] wlan0: authenticated
[] wlan0: associate with 00:19:70:83:d5:6f (try 1/3)
[] wlan0: RX AssocResp from 00:19:70:83:d5:6f (capab=0x431 status=0 aid=4)
[] wlan0: associated
[] IPv6: ADDRCONF(
[] ath: regdomain 0x82d4 updated by CountryIE
[] ath: EEPROM regdomain: 0x82d4
[] ath: EEPROM indicates we should expect a country code
[] ath: doing EEPROM country->regdmn map search
[] ath: country maps to regdmn code: 0x37
[] ath: Country alpha2 being used: ES
[] ath: Regpair used: 0x37
[] usb 1-1.5: >new full-speed USB device number 4 using ehci_hcd
[] usb 1-1.5: >New USB device found, idVendor=0489, idProduct=e027
[] usb 1-1.5: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[] usbcore: registered new interface driver btusb
[] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] wlan0: authenticate with 00:19:70:83:d5:6f
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] wlan0: send auth to 00:19:70:83:d5:6f (try 1/3)
[] wlan0: send auth to 00:19:70:83:d5:6f (try 2/3)
[] wlan0: send auth to 00:19:70:83:d5:6f (try 3/3)
[] wlan0: authentication with 00:19:70:83:d5:6f timed out
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] IPv6: ADDRCONF(
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Could not kill baseband RX
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
[] ath: phy0: Unable to reset channel, reset status -5
[] ath: phy0: Unable to set channel
~$ sudo dmidecode|egrep 'anufact|
Release Date: 04/28/2011
Manufacturer: Sony Corporation
Product Name: VPCEH1S1E
Serial Number: 27545237-5001242
Manufacturer: Sony Corporation
Product Name: VAIO
Serial Number: N/A
Manufacturer: Sony Corporation
Serial Number: N/A
Manufacturer: GenuineIntel
Serial Number: N/A
~$ iwconfig;
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
~$ cat /etc/modprobe.d/* | egrep 'acx|at76|
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
~$ cat /var/lib/
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
~# sudo hwinfo --netcard ;
> hal.1: read hal dataprocess 4958: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCI 700.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.eVj0IaBAaq2
Parent ID: z8Q3.iv0PY6HXLAC
SysFS ID: /devices/
SysFS BusID: 0000:07:00.0
Hardware Class: network
Model: "Atheros WLAN controller"
Vendor: pci 0x168c "Atheros Communications Inc."
Device: pci 0x002b
SubVendor: pci 0x105b "Foxconn International, Inc."
SubDevice: pci 0xe037
Revision: 0x01
Driver: "ath9k"
Driver Modules: "ath9k", "ath9k"
Device File: wlan0
Features: WLAN
Memory Range: 0xd5200000-
IRQ: 16 (359330 events)
HW Address: cc:af:78:b9:9a:49
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd
Driver Info #0:
Driver Status: ath9k is active
Driver Activation Cmd: "modprobe ath9k"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
23: PCI 1300.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.n3eUAoZ41QD
Parent ID: HnsE.s2TuLloocaE
SysFS ID: /devices/
SysFS BusID: 0000:13:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x104d "Sony Corporation"
SubDevice: pci 0x908b
Revision: 0x06
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xd4104000-
Memory Range: 0xd4100000-
IRQ: 42 (no events)
HW Address: 78:84:3c:e8:58:38
Link detected: no
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
~$ ps -aux|egrep 'wpa|icd|etwork';
warning: bad ps syntax, perhaps a bogus '-'?
See http://
root 986 0.0 0.0 256256 6956 ? Ssl 13:18 0:00 NetworkManager
root 1060 0.0 0.0 31860 2440 ? Ss 13:18 0:00 /sbin/wpa_
nobody 1519 0.0 0.0 33104 1612 ? S 13:18 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
root 4975 0.0 0.0 13604 912 pts/0 S+ 14:05 0:00 egrep --color=auto wpa|icd|etwork
~$ sudo lsmod
Module Size Used by
btusb 18334 0
pci_stub 12622 1
vboxpci 23157 0
vboxnetadp 25670 0
vboxnetflt 23442 0
vboxdrv 287189 3 vboxpci,
parport_pc 32688 0
ppdev 17073 0
rfcomm 46619 0
bnep 18140 2
bluetooth 209199 12 btusb,rfcomm,bnep
binfmt_misc 17500 1
joydev 17457 0
snd_hda_codec_hdmi 32007 1
coretemp 13400 0
kvm 414070 0
ghash_clmulni_intel 13180 0
cryptd 20403 1 ghash_clmulni_intel
uvcvideo 76749 0
videobuf2_core 32851 1 uvcvideo
videodev 120309 2 uvcvideo,
videobuf2_vmalloc 12860 1 uvcvideo
videobuf2_memops 13368 1 videobuf2_vmalloc
snd_hda_
snd_hda_intel 33491 5
snd_hda_codec 134212 3 snd_hda_
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 96580 3 snd_hda_
snd_seq_midi 13324 0
snd_rawmidi 30512 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61521 2 snd_seq_
snd_timer 29425 2 snd_pcm,snd_seq
nvidia 11263007 63
microcode 22803 0
psmouse 95552 0
snd_seq_device 14497 3 snd_seq_
rts_pstor 433804 0
arc4 12529 2
lpc_ich 17061 0
serio_raw 13215 0
sony_laptop 54039 0
video 19335 0
snd 78734 20 snd_hda_
ath9k 131308 0
mac80211 539908 1 ath9k
mac_hid 13205 0
ath9k_common 14055 1 ath9k
ath9k_hw 395218 2 ath9k,ath9k_common
ath 23827 3 ath9k,ath9k_
cfg80211 206566 3 ath9k,mac80211,ath
mei 40690 0
soundcore 15047 1 snd
snd_page_alloc 18484 2 snd_hda_
lp 17759 0
parport 46345 3 parport_pc,ppdev,lp
r8169 61650 0
Revision history for this message
|
#9 |
Try:
echo "nameserver 8.8.8.8" | sudo tee /etc/resolvconf
Reboot to test
Revision history for this message
|
#10 |
This don't work for me, I did when I reboot I got internet(like always when I reboot), but few minutes later I lost again. and I can't connnect again.
Revision history for this message
|
#11 |
This don't work for me too,like fcolavin, when I reboot I got internet , but few minutes later I lost again.
This is my output
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
*-network DISABLED
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 01
serial: 74:2f:68:e4:21:2b
width: 64 bits
clock: 33MHz
resources: irq:17 memory:
*-network
description: Ethernet interface
product: AR8151 v2.0 Gigabit Ethernet
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: c0
serial: 54:04:a6:4c:44:99
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:57 memory:
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
vmnet8 Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
vmnet1 Interface doesn't support scanning.
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1058] (rev a1)
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042]
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 1b1a:0000
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 13d3:5710 IMC Networks
H/W path Device Class Description
=======
/0 bus K53SD
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/0/4/5 memory 32KiB L1 cache
/0/4/6 memory 256KiB L2 cache
/0/4/7 memory 6MiB L3 cache
/0/40 memory 8GiB System Memory
/0/40/0 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
/0/40/1 memory DIMM [empty]
/0/40/2 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
/0/40/3 memory DIMM [empty]
/0/100 bridge 2nd Generation Core Processor Family DRAM Controller
/0/100/1 bridge Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
/0/100/1/0 display NVIDIA Corporation
/0/100/2 display 2nd Generation Core Processor Family Integrated Graphics Controller
/0/100/16 communication 6 Series/C200 Series Chipset Family MEI Controller #1
/0/100/1a bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
/0/100/1b multimedia 6 Series/C200 Series Chipset Family High Definition Audio Controller
/0/100/1c bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 1
/0/100/1c.1 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 2
/0/100/1c.1/0 wlan0 network AR9285 Wireless Network Adapter (PCI-Express)
/0/100/1c.3 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 4
/0/100/1c.3/0 bus ASM1042 SuperSpeed USB Host Controller
/0/100/1c.5 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 6
/0/100/1c.5/0 eth0 network AR8151 v2.0 Gigabit Ethernet
/0/100/1d bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
/0/100/1f bridge HM65 Express Chipset Family LPC Controller
/0/100/1f.2 storage 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
/0/100/1f.3 bus 6 Series/C200 Series Chipset Family SMBus Controller
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 750GB ST9750420AS
/0/1/0.0.0/1 /dev/sda1 volume 7777MiB Linux swap volume
/0/1/0.0.0/2 /dev/sda2 volume 691GiB Extended partition
/0/1/0.0.0/2/5 /dev/sda5 volume 39GiB Linux filesystem partition
/0/1/0.0.0/2/6 /dev/sda6 volume 465GiB Linux filesystem partition
/0/1/0.0.0/2/7 /dev/sda7 volume 186GiB Linux filesystem partition
/0/2 scsi2 storage
/0/2/0.0.0 /dev/cdrom1 disk DVD A DS8A8SH
Linux K53SD 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [mem 0x000fcc80-
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.298136] Switched APIC routing to physical flat.
[ 0.559185] ACPI: EC: EC description table is found, configuring boot EC
[ 0.599957] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.913297] ACPI: No dock devices found.
[ 1.677259] ACPI: bus type usb registered
[ 1.677278] usbcore: registered new interface driver usbfs
[ 1.677285] usbcore: registered new interface driver hub
[ 1.677300] usbcore: registered new device driver usb
[ 1.681143] Switching to clocksource hpet
[ 1.738180] pnp: PnP ACPI: found 14 devices
[ 1.773590] input: Lid Switch as /devices/
[ 1.789145] ACPI: Lid Switch [LID]
[ 1.936874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.936879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936884] usb usb1: Product: EHCI Host Controller
[ 1.936889] usb usb1: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[ 1.936894] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.936994] hub 1-0:1.0: USB hub found
[ 1.952847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.952852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.952857] usb usb2: Product: EHCI Host Controller
[ 1.952862] usb usb2: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[ 1.952866] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.952960] hub 2-0:1.0: USB hub found
[ 1.963985] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.963986] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.963988] usb usb3: Product: xHCI Host Controller
[ 1.963990] usb usb3: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[ 1.963991] usb usb3: SerialNumber: 0000:04:00.0
[ 1.964062] hub 3-0:1.0: USB hub found
[ 1.964169] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.964171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.964173] usb usb4: Product: xHCI Host Controller
[ 1.964174] usb usb4: Manufacturer: Linux 3.5.0-21-generic xhci_hcd
[ 1.964176] usb usb4: SerialNumber: 0000:04:00.0
[ 1.964241] hub 4-0:1.0: USB hub found
[ 1.964348] usbcore: registered new interface driver libusual
[ 1.976377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.248576] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.380901] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.380911] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.381342] hub 1-1:1.0: USB hub found
[ 2.492280] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.624463] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.624473] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.624832] hub 2-1:1.0: USB hub found
[ 2.743982] Switching to clocksource tsc
[ 2.791895] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.811616] usb 3-1: New USB device found, idVendor=1b1a, idProduct=0000
[ 2.811619] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.811622] usb 3-1: Product: USB Mouse
[ 2.811739] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.816425] usbcore: registered new interface driver usbhid
[ 2.816439] usbhid: USB HID core driver
[ 2.817957] input: USB Mouse as /devices/
[ 2.818052] hid-generic 0003:1B1A:
[ 2.883916] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.976967] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.976976] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.047775] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 3.199937] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5710
[ 3.199947] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.199952] usb 1-1.2: Product: USB 2.0 UVC VGA WebCam
[ 3.199957] usb 1-1.2: Manufacturer: Azurewave
[ 3.199961] usb 1-1.2: SerialNumber: 0x0001
[ 13.395778] IPv6: ADDRCONF(
[ 13.456327] lp: driver loaded but no devices found
[ 13.458142] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 13.464293] input: USB 2.0 UVC VGA WebCam as /devices/
[ 13.464363] usbcore: registered new interface driver uvcvideo
[ 13.491222] usbcore: registered new interface driver btusb
[ 13.517799] ath: EEPROM regdomain: 0x60
[ 13.517803] ath: EEPROM indicates we should expect a direct regpair map
[ 13.517806] ath: Country alpha2 being used: 00
[ 13.517808] ath: Regpair used: 0x60
[ 13.525138] ieee80211 phy0: Selected rate control algorithm 'ath9k_
[ 13.525432] Registered led device: ath9k-phy0
[ 13.556518] ACPI Error: Needed [Buffer/
[ 13.556529] ACPI Error: Method parse/execution failed [\_SB_.
[ 13.556628] ACPI Error: Needed [Buffer/
[ 13.556634] ACPI Error: Method parse/execution failed [\_SB_.
[ 13.556638] ACPI Error: Method parse/execution failed [\_SB_.
[ 13.556704] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.
[ 14.131366] Console: switching to colour frame buffer device 170x48
[ 14.137210] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 14.137234] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.142955] vga_switcheroo: enabled
[ 14.191049] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 14.191121] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 14.195476] psmouse serio4: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[ 14.286330] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 14.730982] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/
[ 14.731064] input: HDA Intel PCH Mic as /devices/
[ 14.731136] input: HDA Intel PCH Headphone as /devices/
[ 17.096281] IPv6: ADDRCONF(
[ 17.100415] IPv6: ADDRCONF(
[ 17.125796] IPv6: ADDRCONF(
[ 17.128618] IPv6: ADDRCONF(
[ 17.488900] bridge-eth0: up
[ 17.488903] bridge-eth0: attached
[ 18.096177] bridge-eth0: disabling the bridge on dev down
[ 18.096224] bridge-eth0: down
[ 18.096228] bridge-eth0: detached
[ 19.502252] wlan0: authenticate with 90:f6:52:27:63:9e
[ 19.514791] wlan0: send auth to 90:f6:52:27:63:9e (try 1/3)
[ 19.516747] wlan0: authenticated
[ 19.525501] wlan0: associate with 90:f6:52:27:63:9e (try 1/3)
[ 19.529664] wlan0: RX AssocResp from 90:f6:52:27:63:9e (capab=0x431 status=0 aid=18)
[ 19.529753] wlan0: associated
[ 19.530164] IPv6: ADDRCONF(
[ 19.598713] bridge-wlan0: device is wireless, enabling SMAC
[ 19.598715] bridge-wlan0: up
[ 19.598717] bridge-wlan0: attached
[ 340.413691] wlan0: deauthenticating from 90:f6:52:27:63:9e by local choice (reason=3)
[ 340.443605] bridge-wlan0: disabling the bridge on dev down
[ 340.443672] bridge-wlan0: down
[ 340.443690] bridge-wlan0: detached
[ 340.643467] userif-3: sent link up event.<7>[ 341.548243] wlan0: authenticate with 90:f6:52:27:63:9e
[ 341.560816] wlan0: send auth to 90:f6:52:27:63:9e (try 1/3)
[ 341.562720] wlan0: authenticated
[ 341.571445] wlan0: associate with 90:f6:52:27:63:9e (try 1/3)
[ 341.575726] wlan0: RX AssocResp from 90:f6:52:27:63:9e (capab=0x431 status=0 aid=18)
[ 341.575805] wlan0: associated
[ 342.586078] bridge-wlan0: device is wireless, enabling SMAC
[ 342.586087] bridge-wlan0: up
[ 342.586096] bridge-wlan0: attached
[ 343.934666] userif-3: sent link up event.<6>[ 568.170222] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[ 568.171694] IPv6: ADDRCONF(
[ 568.371702] userif-3: sent link up event.<7>[ 572.131930] bridge-wlan0: disabling the bridge on dev down
[ 572.131956] bridge-wlan0: down
[ 572.131961] bridge-wlan0: detached
[ 572.132041] bridge-eth0: up
[ 572.132043] bridge-eth0: attached
[ 572.331830] userif-3: sent link up event.<7>[ 573.483468] bridge-eth0: disabling the bridge on dev down
[ 573.483529] bridge-eth0: down
[ 573.483537] bridge-eth0: detached
[ 573.483600] bridge-wlan0: device is wireless, enabling SMAC
[ 573.483602] bridge-wlan0: up
[ 573.483616] bridge-wlan0: attached
[ 573.683171] userif-3: sent link up event.<7>[ 585.867017] wlan0: deauthenticating from 90:f6:52:27:63:9e by local choice (reason=3)
[ 585.894526] bridge-wlan0: disabling the bridge on dev down
[ 585.894588] bridge-wlan0: down
[ 585.894611] bridge-wlan0: detached
[ 585.894749] bridge-eth0: up
[ 585.894814] bridge-eth0: attached
Release Date: 11/02/2011
Serial services are supported (int 14h)
Manufacturer: ASUSTeK Computer Inc.
Product Name: K53SD
Serial Number: BSN123456789012
Manufacturer: ASUSTeK Computer Inc.
Serial Number: CSN123456789012
Manufacturer: Intel
Serial Number: To Be Filled By O.E.M.
External Reference Designator: Serial Port
Port Type: Serial Port 16550A Compatible
Manufacturer: ASUSTeK Computer Inc.
Product Name: K53SD
Serial Number: BCN0AS112182496
Manufacturer: Elpida
Serial Number: 19C714BD
Manufacturer: [Empty]
Serial Number: [Empty]
Manufacturer: Elpida
Serial Number: 1BC714C5
Manufacturer: [Empty]
Serial Number: [Empty]
vmnet8 no wireless extensions.
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
vmnet1 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
blacklist brcmfmac
blacklist brcmsmac
blacklist bcma
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=false
WimaxEnabled=true
> hal.1: read hal dataprocess 6080: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
23: PCI 300.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.E9WkomEgu13
Parent ID: qTvu.gZlZeqGJmj2
SysFS ID: /devices/
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Atheros WLAN controller"
Vendor: pci 0x168c "Atheros Communications Inc."
Device: pci 0x002b
SubVendor: pci 0x1a3b
SubDevice: pci 0x2c37
Revision: 0x01
Driver: "ath9k"
Driver Modules: "ath9k", "ath9k"
Device File: wlan0
Features: WLAN
Memory Range: 0xddc00000-
IRQ: 17 (54546 events)
HW Address: 74:2f:68:e4:21:2b
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd
Driver Info #0:
Driver Status: ath9k is active
Driver Activation Cmd: "modprobe ath9k"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
25: PCI 500.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.VPVWDTPfG+9
Parent ID: HnsE.otIZUKZA_M4
SysFS ID: /devices/
SysFS BusID: 0000:05:00.0
Hardware Class: network
Model: "Attansic Ethernet controller"
Vendor: pci 0x1969 "Attansic Technology Corp."
Device: pci 0x1083
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1851
Revision: 0xc0
Driver: "atl1c"
Driver Modules: "atl1c"
Device File: eth0
Memory Range: 0xdc800000-
I/O Ports: 0x9000-0x9fff (rw)
IRQ: 57 (43777 events)
HW Address: 54:04:a6:4c:44:99
Link detected: yes
Module Alias: "pci:v00001969d
Driver Info #0:
Driver Status: atl1c is active
Driver Activation Cmd: "modprobe atl1c"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
warning: bad ps syntax, perhaps a bogus '-'?
See http://
root 997 0.0 0.0 246372 6120 ? Ssl 10:39 0:00 NetworkManager
root 1223 0.0 0.0 31860 2460 ? Ss 10:39 0:00 /sbin/wpa_
nobody 1743 0.0 0.0 33072 1672 ? S 10:39 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
root 5206 0.0 0.0 10192 3740 ? S 10:49 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
adolfo 6100 0.0 0.0 13584 916 pts/0 S+ 11:24 0:00 egrep --color=auto wpa|icd|etwork
Module Size Used by
btrfs 761721 0
zlib_deflate 26914 1 btrfs
libcrc32c 12644 1 btrfs
ufs 74821 0
qnx4 13317 0
hfsplus 84442 0
hfs 54553 0
minix 36058 0
ntfs 97304 0
msdos 17332 0
jfs 181093 0
xfs 837979 0
reiserfs 246392 0
ext2 72880 0
vmnet 55800 13
vsock 52875 0
vmci 87583 1 vsock
vmmon 76095 0
parport_pc 32688 0
ppdev 17073 0
rfcomm 46619 0
bnep 18140 2
snd_hda_codec_hdmi 32007 1
snd_hda_
joydev 17457 0
coretemp 13400 0
kvm_intel 132759 0
kvm 414070 1 kvm_intel
ghash_clmulni_intel 13180 0
cryptd 20403 1 ghash_clmulni_intel
nouveau 895609 1
ttm 83595 1 nouveau
asus_nb_wmi 12710 0
asus_wmi 24088 1 asus_nb_wmi
sparse_keymap 13890 1 asus_wmi
arc4 12529 2
snd_hda_intel 33491 3
snd_hda_codec 134212 3 snd_hda_
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 96580 3 snd_hda_
snd_seq_midi 13324 0
snd_rawmidi 30512 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
microcode 22803 0
btusb 22474 0
bluetooth 209199 12 rfcomm,bnep,btusb
mac_hid 13205 0
snd_seq 61521 2 snd_seq_
ath9k 131316 0
snd_timer 29425 2 snd_pcm,snd_seq
snd_seq_device 14497 3 snd_seq_
mac80211 539908 1 ath9k
ath9k_common 14055 1 ath9k
lpc_ich 17061 0
ath9k_hw 395218 2 ath9k,ath9k_common
ath 23827 3 ath9k,ath9k_
snd 78734 16 snd_hda_
cfg80211 206566 3 ath9k,mac80211,ath
i915 520539 3
uvcvideo 76749 0
soundcore 15047 1 snd
snd_page_alloc 18484 2 snd_hda_
videobuf2_core 32851 1 uvcvideo
videodev 120309 2 uvcvideo,
videobuf2_vmalloc 12860 1 uvcvideo
videobuf2_memops 13368 1 videobuf2_vmalloc
drm_kms_helper 49112 2 nouveau,i915
mxm_wmi 12979 1 nouveau
drm 288670 7 nouveau,
lp 17759 0
psmouse 95552 0
parport 46345 3 parport_pc,ppdev,lp
mei 40690 0
serio_raw 13215 0
i2c_algo_bit 13413 2 nouveau,i915
video 19335 2 nouveau,i915
wmi 19070 3 nouveau,
hid_generic 12493 0
usbhid 46947 0
hid 100366 2 hid_generic,usbhid
atl1c 41101 0
Some one can help me?What can I do?
Revision history for this message
|
#12 |
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: NetLink BCM5784M Gigabit Ethernet PCIe
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 00:23:ae:77:67:f2
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:44 memory:
*-network
description: Wireless interface
physical id: 1
logical name: wlan1
serial: c8:d7:19:0c:4f:bb
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
Subsystem: Dell Device [1028:0294]
Kernel driver in use: tg3
Bus 001 Device 004: ID 13b1:003a Linksys AE2500 802.11abgn Wireless Adapter [Broadcom BCM43236]
Bus 002 Device 002: ID 1bcf:05ca Sunplus Innovation Technology Inc.
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running connected enabled enabled enabled disabled
H/W path Device Class Description
=======
/0 bus 0T656F
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Core(TM)2 Duo CPU E7300 @ 2
/0/400/700 memory 32KiB L1 cache
/0/400/701 memory 3MiB L2 cache
/0/400/0.1 processor Logical CPU
/0/400/0.2 processor Logical CPU
/0/1000 memory 2GiB System Memory
/0/1000/0 memory 1GiB DIMM DDR2 Synchronous 800 MHz (1.2 n
/0/1000/1 memory 1GiB DIMM DDR2 Synchronous 800 MHz (1.2 n
/0/1 processor
/0/1/0.1 processor Logical CPU
/0/1/0.2 processor Logical CPU
/0/100 bridge 82G33/G31/P35/P31 Express DRAM Controller
/0/100/1 bridge 82G33/G31/P35/P31 Express PCI Express Roo
/0/100/1/0 display RV610 video device [Radeon HD 2400 PRO]
/0/100/1b multimedia NM10/ICH7 Family High Definition Audio Co
/0/100/1c bridge NM10/ICH7 Family PCI Express Port 1
/0/100/1c/0 eth0 network NetLink BCM5784M Gigabit Ethernet PCIe
/0/100/1d bus NM10/ICH7 Family USB UHCI Controller #1
/0/100/1d.1 bus NM10/ICH7 Family USB UHCI Controller #2
/0/100/1d.2 bus NM10/ICH7 Family USB UHCI Controller #3
/0/100/1d.3 bus NM10/ICH7 Family USB UHCI Controller #4
/0/100/1d.7 bus NM10/ICH7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 PCI Bridge
/0/100/1f bridge 82801GB/GR (ICH7 Family) LPC Interface Br
/0/100/1f.1 storage 82801G (ICH7 Family) IDE Controller
/0/100/1f.2 storage NM10/ICH7 Family SATA Controller [IDE mod
/0/100/1f.3 bus NM10/ICH7 Family SMBus Controller
/0/2 scsi2 storage
/0/2/0.0.0 /dev/sda disk 80GB SAMSUNG HD083GJ
/0/2/0.0.0/1 /dev/sda1 volume 72GiB EXT4 volume
/0/2/0.0.0/2 /dev/sda2 volume 2045MiB Extended partition
/0/2/0.0.0/2/5 /dev/sda5 volume 2045MiB Linux swap / Solaris partition
/1 wlan1 network Wireless interface
Linux sara-OptiPlex-360 3.5.0-22-lowlatency #21-Ubuntu SMP PREEMPT Sat Jan 12 15:33:28 UTC 2013 i686 i686 i686 GNU/Linux
[ 0.000000] Linux version 3.5.0-22-lowlatency (buildd@panlong) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #21-Ubuntu SMP PREEMPT Sat Jan 12 15:33:28 UTC 2013 (Ubuntu 3.5.0-22.
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [mem 0x000fe710-
[ 0.000000] Kernel command line: BOOT_IMAGE=
[ 0.117135] Dell OptiPlex 360 series board detected. Selecting BIOS-method for reboots.
[ 0.137014] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.206306] ACPI: No dock devices found.
[ 0.229408] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000
[ 0.229431] pci 0000:02:00.0: reg 10: [mem 0xdfcf0000-
[ 0.229560] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.754933] ACPI: bus type usb registered
[ 0.754955] usbcore: registered new interface driver usbfs
[ 0.754964] usbcore: registered new interface driver hub
[ 0.754968] usbcore: registered new device driver usb
[ 0.766910] Switching to clocksource hpet
[ 0.805906] pnp: PnP ACPI: found 9 devices
[ 1.200777] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.210057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.210059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210061] usb usb1: Product: EHCI Host Controller
[ 1.210063] usb usb1: Manufacturer: Linux 3.5.0-22-lowlatency ehci_hcd
[ 1.210065] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.210150] hub 1-0:1.0: USB hub found
[ 1.210316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.210318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210320] usb usb2: Product: UHCI Host Controller
[ 1.210322] usb usb2: Manufacturer: Linux 3.5.0-22-lowlatency uhci_hcd
[ 1.210324] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.210399] hub 2-0:1.0: USB hub found
[ 1.210530] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.210532] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210534] usb usb3: Product: UHCI Host Controller
[ 1.210536] usb usb3: Manufacturer: Linux 3.5.0-22-lowlatency uhci_hcd
[ 1.210538] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.210616] hub 3-0:1.0: USB hub found
[ 1.210747] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.210749] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210751] usb usb4: Product: UHCI Host Controller
[ 1.210753] usb usb4: Manufacturer: Linux 3.5.0-22-lowlatency uhci_hcd
[ 1.210754] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.210834] hub 4-0:1.0: USB hub found
[ 1.210961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.210963] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.210965] usb usb5: Product: UHCI Host Controller
[ 1.210967] usb usb5: Manufacturer: Linux 3.5.0-22-lowlatency uhci_hcd
[ 1.210968] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.211049] hub 5-0:1.0: USB hub found
[ 1.211141] usbcore: registered new interface driver libusual
[ 1.211173] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.225437] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.355642] isapnp: No Plug & Play device found
[ 1.665024] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 1.781688] usb 1-4: New USB device found, idVendor=13b1, idProduct=003a
[ 1.781692] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.781695] usb 1-4: Product: Linksys AE2500
[ 1.781698] usb 1-4: Manufacturer: Cisco
[ 1.781701] usb 1-4: SerialNumber: 000000000001
[ 1.844023] Switching to clocksource tsc
[ 1.988019] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.148327] usb 2-1: New USB device found, idVendor=1bcf, idProduct=05ca
[ 2.148331] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.148334] usb 2-1: Product: 2.4GHz 2way RF Receiver
[ 2.361018] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 2.518327] usb 2-2: New USB device found, idVendor=045e, idProduct=0745
[ 2.518331] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.518334] usb 2-2: Product: Microsoft\
[ 2.518337] usb 2-2: Manufacturer: Microsoft
[ 5.544619] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:23:ae:77:67:f2
[ 5.544624] tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 5.544627] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.544629] tg3 0000:02:00.0: eth0: dma_rwctrl[
[ 5.554398] usbcore: registered new interface driver usbhid
[ 5.554401] usbhid: USB HID core driver
[ 5.556491] input: 2.4GHz 2way RF Receiver as /devices/
[ 5.556561] hid-generic 0003:1BCF:
[ 5.557586] input: 2.4GHz 2way RF Receiver as /devices/
[ 5.558178] hid-generic 0003:1BCF:
[ 5.558578] input: Microsoft Microsoft\
[ 5.558637] hid-generic 0003:045E:
[ 5.560443] input: Microsoft Microsoft\
[ 5.560524] hid-generic 0003:045E:
[ 5.579501] input: Microsoft Microsoft\
[ 5.579592] hid-generic 0003:045E:
[ 14.392120] IPv6: ADDRCONF(
[ 14.475772] lp: driver loaded but no devices found
[ 14.478245] ndiswrapper version 1.58rc1 loaded (smp=yes, preempt=yes)
[ 14.560488] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.560488] intel_rng: don't want to disable this in firmware setup, and if
[ 14.563534] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 14.563601] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.563843] leds_ss4200: no LED devices found
[ 14.627186] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.658033] usb 1-4: reset high-speed USB device number 4 using ehci_hcd
[ 14.972300] Console: switching to colour frame buffer device 128x48
[ 15.080381] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 15.155501] ndiswrapper: driver bcmwlhigh5 (Cisco Consumer Products LLC,03/28/2011, 5.100.68.46) loaded
[ 15.202248] IPv6: ADDRCONF(
[ 15.202537] IPv6: ADDRCONF(
[ 15.488973] ndiswrapper (MmBuildMdlForN
[ 15.488978] ndiswrapper (MmBuildMdlForN
[ 15.488980] ndiswrapper (MmBuildMdlForN
[ 15.488982] ndiswrapper (MmBuildMdlForN
[ 15.488984] ndiswrapper (MmBuildMdlForN
[ 15.488986] ndiswrapper (MmBuildMdlForN
[ 15.488988] ndiswrapper (MmBuildMdlForN
[ 15.488991] ndiswrapper (MmBuildMdlForN
[ 15.488993] ndiswrapper (MmBuildMdlForN
[ 15.488995] ndiswrapper (MmBuildMdlForN
[ 15.488997] ndiswrapper (MmBuildMdlForN
[ 15.489075] ndiswrapper (MmBuildMdlForN
[ 15.489078] ndiswrapper (MmBuildMdlForN
[ 15.489080] ndiswrapper (MmBuildMdlForN
[ 15.489083] ndiswrapper (MmBuildMdlForN
[ 15.489085] ndiswrapper (MmBuildMdlForN
[ 15.489087] ndiswrapper (MmBuildMdlForN
[ 15.489090] ndiswrapper (MmBuildMdlForN
[ 15.489092] ndiswrapper (MmBuildMdlForN
[ 15.489094] ndiswrapper (MmBuildMdlForN
[ 15.489096] ndiswrapper (MmBuildMdlForN
[ 15.489098] ndiswrapper (MmBuildMdlForN
[ 15.489100] ndiswrapper (MmBuildMdlForN
[ 15.489103] ndiswrapper (MmBuildMdlForN
[ 15.489105] ndiswrapper (MmBuildMdlForN
[ 15.489107] ndiswrapper (MmBuildMdlForN
[ 15.489109] ndiswrapper (MmBuildMdlForN
[ 15.489111] ndiswrapper (MmBuildMdlForN
[ 15.489113] ndiswrapper (MmBuildMdlForN
[ 15.489116] ndiswrapper (MmBuildMdlForN
[ 15.489118] ndiswrapper (MmBuildMdlForN
[ 15.489121] ndiswrapper (MmBuildMdlForN
[ 15.489123] ndiswrapper (MmBuildMdlForN
[ 15.489125] ndiswrapper (MmBuildMdlForN
[ 15.489127] ndiswrapper (MmBuildMdlForN
[ 15.489130] ndiswrapper (MmBuildMdlForN
[ 15.489132] ndiswrapper (MmBuildMdlForN
[ 15.489134] ndiswrapper (MmBuildMdlForN
[ 15.489136] ndiswrapper (MmBuildMdlForN
[ 15.489138] ndiswrapper (MmBuildMdlForN
[ 15.489141] ndiswrapper (MmBuildMdlForN
[ 15.489143] ndiswrapper (MmBuildMdlForN
[ 15.489145] ndiswrapper (MmBuildMdlForN
[ 15.489147] ndiswrapper (MmBuildMdlForN
[ 15.489150] ndiswrapper (MmBuildMdlForN
[ 15.489152] ndiswrapper (MmBuildMdlForN
[ 15.489154] ndiswrapper (MmBuildMdlForN
[ 15.489157] ndiswrapper (MmBuildMdlForN
[ 15.489159] ndiswrapper (MmBuildMdlForN
[ 15.489161] ndiswrapper (MmBuildMdlForN
[ 15.505407] ndiswrapper (ndis_encode_
[ 15.780049] wlan0: ethernet device c8:d7:19:0c:4f:bb using NDIS driver: bcmwlhigh5, version: 0x564442e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 13B1:003A.F.conf
[ 15.796982] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2-PSK; AES/CCMP with WPA, WPA2, WPA2-PSK
[ 15.799358] usbcore: registered new interface driver ndiswrapper
[ 15.805653] ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
[ 15.813915] IPv6: ADDRCONF(
[ 15.814098] IPv6: ADDRCONF(
[ 62.773407] IPv6: ADDRCONF(
Release Date: 11/28/2008
Serial services are supported (int 14h)
Manufacturer: Dell Inc.
Product Name: OptiPlex 360
Serial Number: HLT5PJ1
Manufacturer: Dell Inc.
Product Name: 0T656F
Serial Number: ..CN1374091E008J.
Manufacturer: Dell Inc.
Serial Number: HLT5PJ1
Manufacturer: Intel
Serial Number: Not Specified
Port Type: Serial Port 16550A Compatible
Manufacturer: 7FBA000000000000
Serial Number: 00000000
Manufacturer: 7FBA000000000000
Serial Number: 00000000
lo no wireless extensions.
eth0 no wireless extensions.
wlan1 IEEE 802.11g ESSID:"sullys"
Bit Rate=65 Mb/s Tx-Power:32 dBm
RTS thr:2347 B Fragment thr:2346 B
Power Management:off
Link Quality:53/100 Signal level:-62 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
alias usb:v13B1p0039d
alias usb:v13B1p003Ad
alias usb:v13B1p0039d
alias usb:v13B1p003Ad
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 2453: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
24: PCI 200.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.grbn7e5KnX6
Parent ID: z8Q3.Y72FKnUs+tF
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Broadcom NetLink BCM5784M Gigabit Ethernet PCIe"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1698 "NetLink BCM5784M Gigabit Ethernet PCIe"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0294
Revision: 0x10
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xdfcf0000-
IRQ: 44 (3 events)
HW Address: 00:23:ae:77:67:f2
Link detected: no
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
39: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: Uc5H.Hsbm43aaW_4
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/
SysFS BusID: 1-4:1.0
Hardware Class: network
Model: "Linksys AE2500"
Hotplug: USB
Vendor: usb 0x13b1 "Linksys"
Device: usb 0x003a "Linksys AE2500"
Revision: "0.01"
Serial ID: "000000000001"
Driver: "ndiswrapper"
Driver Modules: "ndiswrapper", "ndiswrapper"
Device File: wlan1
Features: WLAN
Speed: 480 Mbps
HW Address: c8:d7:19:0c:4f:bb
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN bitrates: 6 9 12 18
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v13B1p003A
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #38 (Hub)
warning: bad ps syntax, perhaps a bogus '-'?
See http://
root 749 0.0 0.2 32776 5356 ? Ssl 19:14 0:00 NetworkManager
root 927 0.0 0.1 6136 2188 ? Ss 19:14 0:00 /sbin/wpa_
root 975 0.1 0.3 25420 7204 ? S 19:14 0:00 /usr/bin/python -O /usr/share/
root 1011 0.0 0.3 15172 7820 ? S 19:14 0:00 /usr/bin/python -O /usr/share/
sara 1507 0.1 1.2 206424 25428 ? Sl 19:14 0:00 /usr/bin/python -O /usr/share/
sara 1698 0.1 0.4 22104 9132 ? S 19:14 0:00 /usr/lib/
root 1755 0.0 0.1 5492 3124 ? S 19:15 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
nobody 1764 0.0 0.0 5468 1420 ? S 19:15 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
sara 2469 0.0 0.0 4392 824 pts/1 S+ 19:19 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan1
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1
search neo.rr.com
Module Size Used by
snd_hda_
coretemp 13169 0
bnep 17708 2
bluetooth 187364 7 bnep
ppdev 12818 0
gpio_ich 13160 0
snd_hda_intel 32516 4
snd_hda_codec 111548 2 snd_hda_
snd_hwdep 13273 1 snd_hda_codec
joydev 17162 0
snd_pcm 80235 2 snd_hda_
snd_seq_midi 13133 0
snd_rawmidi 25383 1 snd_seq_midi
snd_seq_midi_event 14476 1 snd_seq_midi
snd_seq 51281 2 snd_seq_
dcdbas 14055 0
snd_timer 24412 2 snd_pcm,snd_seq
snd_seq_device 14138 3 snd_seq_
microcode 18210 0
parport_pc 31969 1
snd 62146 17 snd_hda_
psmouse 84878 0
lpc_ich 16926 0
serio_raw 13032 0
mac_hid 13038 0
radeon 816668 2
ttm 71439 1 radeon
drm_kms_helper 47304 1 radeon
drm 238811 4 radeon,
i2c_algo_bit 13198 1 radeon
soundcore 14600 1 snd
snd_page_alloc 14037 2 snd_hda_
ndiswrapper 200876 0
lp 13300 0
parport 40754 3 ppdev,parport_pc,lp
hid_generic 12485 0
tg3 130449 0
usbhid 41734 0
hid 82179 2 hid_generic,usbhid
tried disabling and subsequently uninstalling network manager to try wicd as suggested on other sites. my SSID is always displayed and i'm always told i'm connected, but activity halts at random mintervals and i either need to restart my machine or unplug and replug my adapter. this is my girlfriend's machine and she's going nuts help me calm a crazy woman folks. the computer is a dell optiplex360and the apadter is a cisco/linksys AE2500 running on ndiswrapper with a replacement driver (ndiswrapper-
Can you help with this problem?
Provide an answer of your own, or ask Carnalbeast for more information if necessary.