No sound on TV tuner

some tv cards you have patch the sound though your sound card[patch cable] unless your using the caption card on board sound then change your sound preference in the volume control.

There is a patch lead coming from the TV tuner going to the Sound card, but no matter what switch I press it just will not work.
I don`t know what else to do now?
Its the same with the FM Radio tuner no sound.
I use TVtime tv tuner, MythTV, and XawTV.
All same problem no sound.

Mike.

Can you try plugging your speakers directly to the tv tuner to see if you have sound coming out of it?

ClovisFabricio wrote:
> Your question #16655 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/16655
>
> Status: Open => Needs information
>
> ClovisFabricio requested for more information:
> Can you try plugging your speakers directly to the tv tuner to see if
> you have sound coming out of it?
>
>
Hi, yes I done that and no sound coming from the TV tuner card.
But the picture is fine.

Mike.

--
Lets stop killing each other, lets all live in peace.
Too much pain, too much suffering.

Please open a terminal and copy and paste the output of lsmod command.

Thank you

elart.it wrote:
> Your question #16655 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/16655
>
> Status: Open => Needs information
>
> elart.it requested for more information:
> Please open a terminal and copy and paste the output of lsmod command.
>
> Thank you
>
>
Hi, this is the very first time I have done this I hope it is right?

Module Size Used by
xt_limit 3584 8
xt_tcpudp 4224 10
ipt_LOG 7552 8
ipt_MASQUERADE 4608 0
ipt_TOS 3200 0
ipt_REJECT 5760 1
nf_conntrack_irc 8088 0
nf_conntrack_ftp 11136 0
xt_state 3456 6
binfmt_misc 12936 1
af_packet 24840 2
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
nfsd 220912 13
exportfs 7040 1 nfsd
lockd 67592 2 nfsd
sunrpc 172412 8 nfsd,lockd
ppdev 10244 0
cpufreq_ondemand 9612 0
cpufreq_conservative 8072 0
cpufreq_powersave 2688 0
cpufreq_stats 7232 0
cpufreq_userspace 5280 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
button 8976 0
sbs 19592 0
video 18060 0
container 5504 0
ac 6148 0
dock 10656 0
battery 11012 0
sctp 165688 2 [unsafe]
ipv6 273892 19 sctp
lock_dlm 23500 0
gfs2 355116 1 lock_dlm
dlm 111048 1 lock_dlm
configfs 27920 2 dlm
lp 12580 0
xpad 9988 0
usblp 15104 0
snd_usb_audio 81024 0
snd_usb_lib 17920 1 snd_usb_audio
snd_intel8x0 34972 1
snd_ac97_codec 100644 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 53232 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_hwdep 10244 1 snd_usb_audio
saa7134_alsa 15392 0
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
parport_pc 37412 1
parport 37448 3 ppdev,lp,parport_pc
snd_pcm 80388 5
snd_usb_audio,snd_intel8x0,snd_ac97_codec,saa7134_alsa,snd_pcm_oss
snd_timer 24324 2 snd_seq,snd_pcm
snd_seq_device 9228 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 4224 0
saa7134 129100 1 saa7134_alsa
video_buf 26244 2 saa7134_alsa,saa7134
compat_ioctl32 2304 1 saa7134
ir_kbd_i2c 9872 1 saa7134
ir_common 35460 2 saa7134,ir_kbd_i2c
videodev 29312 1 saa7134
v4l2_common 18432 2 saa7134,videodev
v4l1_compat 15364 2 saa7134,videodev
nvidia 4716468 32
snd 54660 15
snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_rawmidi,snd_seq,snd_hwdep,saa7134_alsa,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_seq_device
soundcore 8800 1 snd
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
sis_agp 10116 1
agpgart 35016 2 nvidia,sis_agp
i2c_sis96x 6404 0
i2c_core 26112 4 saa7134,ir_kbd_i2c,nvidia,i2c_sis96x
shpchp 34580 0
pci_hotplug 32704 1 shpchp
joydev 11328 0
evdev 11136 4
iptable_nat 8708 0
nf_nat 20140 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 19724 9 iptable_nat
nf_conntrack 65288 7
ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 6936 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_mangle 3840 0
iptable_filter 3968 1
ip_tables 13924 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16260 9
xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
usb_storage 73024 0
ide_core 116804 1 usb_storage
usbhid 29536 0
hid 28928 1 usbhid
libusual 18448 1 usb_storage
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sr_mod 17828 0
cdrom 37536 1 sr_mod
sd_mod 30336 3
ata_generic 8452 0
floppy 60004 0
sis900 24960 0
mii 6528 1 sis900
ehci_hcd 36492 0
uhci_hcd 26640 0
ohci_hcd 22916 0
usbcore 138632 11
xpad,usblp,snd_usb_audio,snd_usb_lib,usb_storage,usbhid,libusual,ehci_hcd,uhci_hcd,ohci_hcd
pata_sis 15236 2
libata 125168 2 ata_generic,pata_sis
scsi_mod 147084 5 usb_storage,sg,sr_mod,sd_mod,libata
dm_mirror 24448 0
dm_snapshot 18980 0
dm_mod 58816 2 dm_mirror,dm_snapshot
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
root@mike-desktop:/home/mike#

--
Lets stop killing each other, lets all live in peace.
Too much pain, too much suffering.

Try this open a terminal and type:
v4lctl -c /dev/video0 volume mute off
or
v4lctl -c /dev/video1 volume mute off

Then if it don't work please open a terminal and type:

cd /tmp
dmesg > result.txt
echo " --- lspci --- " >> result.txt
lspci >> result.txt
gedit result.txt

copy and paste the content here.

I try to discover the loaded kernel module for your TV tuner card.
After we can pass to it some load parameters.

Thank you

elart.it wrote:
> Your question #16655 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/16655
>
> Status: Open => Needs information
>
> elart.it requested for more information:
> Try this open a terminal and type:
> v4lctl -c /dev/video0 volume mute off
> or
> v4lctl -c /dev/video1 volume mute off
>
> Then if it don't work please open a terminal and type:
>
> cd /tmp
> dmesg > result.txt
> echo " --- lspci --- " >> result.txt
> lspci >> result.txt
> gedit result.txt
>
> copy and paste the content here.
>

[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun
Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 00000000000ea000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA1D0 checksum 0
[ 0.000000] ACPI: RSDP 000FA1D0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT SiS740XX 1000
MSFT 100000B)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT SiS740XX 11
MSFT 100000B)
[ 0.000000] ACPI: DSDT 1FFF0110, 3586 (r1 SiS 740 100
MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0050 (r1 AMIINT SiS740XX 1000
MSFT 100000B)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line:
root=UUID=6e9c4dac-c3e4-4f74-9a1d-4374d4481e86 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1666.502 MHz processor.
[ 34.203522] Console: colour VGA+ 80x25
[ 34.203923] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 34.204243] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 34.221850] Memory: 507660k/524224k available (2015k kernel code,
15960k reserved, 916k data, 364k init, 0k highmem)
[ 34.221863] virtual kernel memory layout:
[ 34.221865] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 34.221866] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 34.221868] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 34.221869] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 34.221871] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 34.221872] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 34.221874] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 34.221879] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 34.221933] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 34.301897] Calibrating delay using timer specific routine.. 3334.89
BogoMIPS (lpj=6669795)
[ 34.301936] Security Framework v1.0.0 initialized
[ 34.301945] SELinux: Disabled at boot.
[ 34.301965] Mount-cache hash table entries: 512
[ 34.302142] CPU: After generic identify, caps: 0383fbff c1cbfbff
00000000 00000000 00000000 00000000 00000000
[ 34.302152] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 34.302157] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 34.302160] CPU: L2 Cache: 256K (64 bytes/line)
[ 34.302164] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000
00000420 00000000 00000000 00000000
[ 34.302177] Compat vDSO mapped to ffffe000.
[ 34.302193] Checking 'hlt' instruction... OK.
[ 34.318056] SMP alternatives: switching to UP code
[ 34.318387] Freeing SMP alternatives: 11k freed
[ 34.318841] Early unpacking initramfs... done
[ 34.720917] ACPI: Core revision 20070126
[ 34.721034] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 34.734411] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 34.734437] Total of 1 processors activated (3334.89 BogoMIPS).
[ 34.734545] ENABLING IO-APIC IRQs
[ 34.734734] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 34.881568] Brought up 1 CPUs
[ 34.881741] Booting paravirtualized kernel on bare hardware
[ 34.881821] Time: 20:28:22 Date: 09/31/107
[ 34.881862] NET: Registered protocol family 16
[ 34.882001] EISA bus registered
[ 34.882017] ACPI: bus type pci registered
[ 34.883389] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
[ 34.883392] PCI: Using configuration type 1
[ 34.883394] Setting up standard PCI resources
[ 34.893953] ACPI: EC: Look up EC in DSDT
[ 34.898012] ACPI: Interpreter enabled
[ 34.898016] ACPI: (supports S0 S1 S4 S5)
[ 34.898034] ACPI: Using IOAPIC for interrupt routing
[ 34.903517] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.903528] PCI: Probing PCI hardware (bus 00)
[ 34.903712] Enabling SiS 96x SMBus.
[ 34.904421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.906381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12
14 15)
[ 34.906500] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 34.906611] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12
14 15)
[ 34.906722] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 34.906830] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 34.906938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 34.907046] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14
15) *0, disabled.
[ 34.907155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 34.907276] ACPI: Power Resource [URP1] (off)
[ 34.907309] ACPI: Power Resource [URP2] (off)
[ 34.907341] ACPI: Power Resource [FDDP] (off)
[ 34.907373] ACPI: Power Resource [LPTP] (off)
[ 34.907385] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.907403] pnp: PnP ACPI init
[ 34.907424] ACPI: bus type pnp registered
[ 34.910652] pnp: PnP ACPI: found 10 devices
[ 34.910655] ACPI: ACPI bus type pnp unregistered
[ 34.910661] PnPBIOS: Disabled by ACPI PNP
[ 34.910739] PCI: Using ACPI for IRQ routing
[ 34.910743] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 34.914740] NET: Registered protocol family 8
[ 34.914744] NET: Registered protocol family 20
[ 34.914850] pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not
be reserved
[ 34.917486] Time: tsc clocksource has been installed.
[ 34.945217] PCI: Bridge: 0000:00:01.0
[ 34.945219] IO window: disabled.
[ 34.945226] MEM window: cdd00000-cfefffff
[ 34.945231] PREFETCH window: bda00000-cdbfffff
[ 34.945267] NET: Registered protocol family 2
[ 34.981515] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 34.981597] TCP established hash table entries: 16384 (order: 5,
196608 bytes)
[ 34.981977] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 34.982267] TCP: Hash tables configured (established 16384 bind 16384)
[ 34.982271] TCP reno registered
[ 34.993628] checking if image is initramfs... it is
[ 35.445139] Switched to high resolution mode on CPU 0
[ 35.753539] Freeing initrd memory: 7586k freed
[ 35.754130] audit: initializing netlink socket (disabled)
[ 35.754149] audit(1193862503.084:1): initialized
[ 35.756526] VFS: Disk quotas dquot_6.5.1
[ 35.756604] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 35.756735] io scheduler noop registered
[ 35.756738] io scheduler anticipatory registered
[ 35.756741] io scheduler deadline registered
[ 35.756757] io scheduler cfq registered (default)
[ 35.812818] Boot video device is 0000:01:00.0
[ 35.813065] isapnp: Scanning for PnP cards...
[ 36.166336] isapnp: No Plug & Play device found
[ 36.198284] Real Time Clock Driver v1.12ac
[ 36.198407] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 36.198530] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.199480] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.200517] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 36.200807] input: Macintosh mouse button emulation as
/class/input/input0
[ 36.200910] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 36.200914] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 36.204355] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 36.204578] mice: PS/2 mouse device common for all mice
[ 36.204723] EISA: Probing bus 0 at eisa.0
[ 36.204763] EISA: Detected 0 cards.
[ 36.205015] TCP cubic registered
[ 36.205028] NET: Registered protocol family 1
[ 36.205057] Using IPI No-Shortcut mode
[ 36.205315] Magic number: 11:403:499
[ 36.206097] Freeing unused kernel memory: 364k freed
[ 36.252515] input: AT Translated Set 2 keyboard as /class/input/input1
[ 37.475912] AppArmor: AppArmor
initialized<5>audit(1193862505.084:2): type=1505 info="AppArmor
initialized" pid=1178
[ 37.484004] fuse init (API version 7.8)
[ 37.490218] Failure registering capabilities with primary security
module.
[ 37.529303] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12)
initialised: <email address hidden>
[ 38.261135] SCSI subsystem initialized
[ 38.267395] libata version 2.21 loaded.
[ 38.269111] pata_sis 0000:00:02.5: version 0.5.1
[ 38.269360] scsi0 : pata_sis
[ 38.269430] scsi1 : pata_sis
[ 38.269564] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x0001ff00 irq 14
[ 38.269569] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376
bmdma 0x0001ff08 irq 15
[ 38.331413] usbcore: registered new interface driver usbfs
[ 38.331451] usbcore: registered new interface driver hub
[ 38.362813] usbcore: registered new device driver usb
[ 38.363894] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 38.386290] USB Universal Host Controller Interface driver v3.0
[ 38.439781] ata1.00: ATA-6: WDC WD800EB-00DJF0, 77.07W77, max UDMA/100
[ 38.439788] ata1.00: 156301488 sectors, multi 16: LBA48
[ 38.440015] ata1.01: ATA-5: ST313021A, 3.32, max UDMA/66
[ 38.440019] ata1.01: 25434228 sectors, multi 32: LBA
[ 38.440025] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 38.440029] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 38.455808] ata1.00: configured for UDMA/33
[ 38.459133] sis900.c: v1.08.10 Apr. 2 2006
[ 38.471122] ata1.01: configured for UDMA/33
[ 38.522700] Floppy drive(s): fd0 is 1.44M
[ 38.560153] FDC 0 is a post-1991 82077
[ 39.066353] ata2.00: ATAPI: RW-523252 3.29 20031204,
3.29, max UDMA/33
[ 39.066364] ata2.01: ATAPI: PIONEER DVD-RW DVR-112D, 1.21, max UDMA/66
[ 39.066372] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 39.238219] ata2.00: configured for UDMA/33
[ 39.410104] ata2.01: configured for UDMA/33
[ 39.410282] scsi 0:0:0:0: Direct-Access ATA WDC WD800EB-00DJ
77.0 PQ: 0 ANSI: 5
[ 39.410870] scsi 0:0:1:0: Direct-Access ATA ST313021A
3.32 PQ: 0 ANSI: 5
[ 39.417650] scsi 1:0:0:0: CD-ROM RW-523252
3.29 PQ: 0 ANSI: 5
[ 39.423621] scsi 1:0:1:0: CD-ROM PIONEER DVD-RW DVR-112D
1.21 PQ: 0 ANSI: 5
[ 39.427750] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level,
low) -> IRQ 16
[ 39.427775] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 39.428356] ohci_hcd 0000:00:03.0: new USB bus registered, assigned
bus number 1
[ 39.428386] ohci_hcd 0000:00:03.0: irq 16, io mem 0xcfffd000
[ 39.457901] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 39.458512] sd 0:0:0:0: [sda] Write Protect is off
[ 39.458517] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.458565] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 39.458664] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 39.458678] sd 0:0:0:0: [sda] Write Protect is off
[ 39.458681] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.458700] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 39.458706] sda: sda1 sda2 <<6>usb usb1: configuration #1 chosen
from 1 choice
[ 39.483998] hub 1-0:1.0: USB hub found
[ 39.484015] hub 1-0:1.0: 3 ports detected
[ 39.494877] sda5 sda6 sda7 sda8 sda9 sda10 >
[ 39.571509] sd 0:0:0:0: [sda] Attached SCSI disk
[ 39.571797] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 39.571816] sd 0:0:1:0: [sdb] Write Protect is off
[ 39.571819] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 39.571842] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 39.571908] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 39.571921] sd 0:0:1:0: [sdb] Write Protect is off
[ 39.571924] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 39.571944] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 39.571948] sdb:<6>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21
(level, low) -> IRQ 17
[ 39.585911] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 39.585944] ohci_hcd 0000:00:03.1: new USB bus registered, assigned
bus number 2
[ 39.585969] ohci_hcd 0000:00:03.1: irq 17, io mem 0xcfffe000
[ 39.592172] sdb1 sdb2 < sdb5 >
[ 39.610982] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 39.615912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.615943] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 39.615969] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 39.615996] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 39.643857] usb usb2: configuration #1 chosen from 1 choice
[ 39.643897] hub 2-0:1.0: USB hub found
[ 39.643915] hub 2-0:1.0: 3 ports detected
[ 39.661622] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 39.661632] Uniform CD-ROM driver Revision: 3.20
[ 39.669031] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 39.698789] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 39.698887] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 39.745953] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level,
low) -> IRQ 18
[ 39.745974] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[ 39.746020] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned
bus number 3
[ 39.746159] uhci_hcd 0000:00:0b.0: irq 18, io base 0x0000cc00
[ 39.746334] usb usb3: configuration #1 chosen from 1 choice
[ 39.746431] hub 3-0:1.0: USB hub found
[ 39.746445] hub 3-0:1.0: 2 ports detected
[ 39.849733] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 18 (level,
low) -> IRQ 19
[ 39.849753] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[ 39.849791] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned
bus number 4
[ 39.849825] uhci_hcd 0000:00:0b.1: irq 19, io base 0x0000d000
[ 39.849976] usb usb4: configuration #1 chosen from 1 choice
[ 39.850009] hub 4-0:1.0: USB hub found
[ 39.850022] hub 4-0:1.0: 2 ports detected
[ 39.889508] usb 1-1: new full speed USB device using ohci_hcd and
address 2
[ 39.953799] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level,
low) -> IRQ 20
[ 39.953822] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 39.953860] ehci_hcd 0000:00:03.2: new USB bus registered, assigned
bus number 5
[ 39.953909] PCI: cache line size of 64 is not supported by device
0000:00:03.2
[ 39.953924] ehci_hcd 0000:00:03.2: irq 20, io mem 0xcffff000
[ 40.065364] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 40.065561] usb usb5: configuration #1 chosen from 1 choice
[ 40.065598] hub 5-0:1.0: USB hub found
[ 40.065614] hub 5-0:1.0: 6 ports detected
[ 40.169445] ACPI: PCI Interrupt 0000:00:0b.2[C] -> GSI 19 (level,
low) -> IRQ 21
[ 40.169470] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[ 40.169508] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned
bus number 6
[ 40.169573] ehci_hcd 0000:00:0b.2: irq 21, io mem 0xcfffbb00
[ 40.169581] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 40.169706] usb usb6: configuration #1 chosen from 1 choice
[ 40.169742] hub 6-0:1.0: USB hub found
[ 40.169756] hub 6-0:1.0: 4 ports detected
[ 40.273505] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level,
low) -> IRQ 21
[ 40.274663] 0000:00:04.0: VIA 6103 PHY transceiver found at address 1.
[ 40.284070] 0000:00:04.0: Using transceiver found at address 1 as default
[ 40.284782] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 21,
00:0d:87:3b:55:e2.
[ 40.473005] usb 1-1: device not accepting address 2, error -62
[ 40.561008] Attempting manual resume
[ 40.561014] swsusp: Resume From Partition 8:21
[ 40.561016] PM: Checking swsusp image.
[ 40.587893] PM: Resume from disk failed.
[ 40.630659] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 40.630667] EXT3-fs: write access will be enabled during recovery.
[ 42.998978] usb 1-1: new full speed USB device using ohci_hcd and
address 4
[ 43.211998] usb 1-1: configuration #1 chosen from 1 choice
[ 43.518566] usb 1-2: new full speed USB device using ohci_hcd and
address 5
[ 43.736605] usb 1-2: configuration #1 chosen from 1 choice
[ 43.978200] usb 3-1: new full speed USB device using uhci_hcd and
address 2
[ 44.131824] usb 3-1: configuration #1 chosen from 1 choice
[ 44.134781] hub 3-1:1.0: USB hub found
[ 44.137661] hub 3-1:1.0: 4 ports detected
[ 44.549728] usb 2-1: new full speed USB device using ohci_hcd and
address 2
[ 44.764764] usb 2-1: configuration #1 chosen from 1 choice
[ 45.077286] usb 2-2: new low speed USB device using ohci_hcd and
address 3
[ 45.291326] usb 2-2: configuration #1 chosen from 1 choice
[ 45.498805] usb 3-1.3: new full speed USB device using uhci_hcd and
address 3
[ 45.638872] usb 3-1.3: configuration #1 chosen from 1 choice
[ 45.846589] usb 3-1.4: new low speed USB device using uhci_hcd and
address 4
[ 45.985671] usb 3-1.4: configuration #1 chosen from 1 choice
[ 45.990575] usbcore: registered new interface driver hiddev
[ 45.996931] input: PS/2+USB Mouse as /class/input/input2
[ 45.996963] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on
usb-0000:00:03.1-2
[ 46.022582] input: Mega World USB Game Controllers as /class/input/input3
[ 46.022592] input: USB HID v1.10 Joystick [Mega World USB Game
Controllers] on usb-0000:00:0b.0-1.4
[ 46.022617] usbcore: registered new interface driver usbhid
[ 46.022623]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 46.023099] usbcore: registered new interface driver libusual
[ 46.032500] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 46.032520] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 46.035408] Initializing USB Mass Storage driver...
[ 46.035541] scsi2 : SCSI emulation for USB Mass Storage devices
[ 46.035612] usb-storage: device found at 2
[ 46.035615] usb-storage: waiting for device to settle before scanning
[ 46.035639] usbcore: registered new interface driver usb-storage
[ 46.035643] USB Mass Storage support registered.
[ 48.052969] kjournald starting. Commit interval 5 seconds
[ 48.053001] EXT3-fs: sdb1: orphan cleanup on readonly fs
[ 48.053012] ext3_orphan_cleanup: deleting unreferenced inode 589747
[ 48.053058] ext3_orphan_cleanup: deleting unreferenced inode 1338276
[ 48.053070] ext3_orphan_cleanup: deleting unreferenced inode 1338275
[ 48.053079] ext3_orphan_cleanup: deleting unreferenced inode 1338274
[ 48.053088] ext3_orphan_cleanup: deleting unreferenced inode 1338273
[ 48.053097] ext3_orphan_cleanup: deleting unreferenced inode 1338272
[ 48.053106] EXT3-fs: sdb1: 6 orphan inodes deleted
[ 48.053108] EXT3-fs: recovery complete.
[ 48.181520] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.029599] usb-storage: device scan complete
[ 51.038577] scsi 2:0:0:0: Direct-Access IOMEGA ZIP 250
90.V PQ: 0 ANSI: 0 CCS
[ 51.071520] sd 2:0:0:0: [sdc] Spinning up disk....<5>sd 2:0:0:0:
[sdc] Attached SCSI removable disk
[ 52.216772] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 58.332298] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.411475] Netfilter messages via NETLINK v0.30.
[ 58.426654] nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
[ 61.831241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 61.994507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 62.062003] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 62.110035] Linux agpgart interface v0.102 (c) Dave Jones
[ 62.161368] agpgart: Detected SiS chipset - id:1862
[ 62.166024] agpgart: AGP aperture is 64M @ 0xd0000000
[ 62.884743] nvidia: module license 'NVIDIA' taints kernel.
[ 63.149822] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 22
[ 63.150471] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639
Mon Apr 16 20:20:06 PDT 2007
[ 63.162491] Linux video capture interface: v2.00
[ 63.301735] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 63.301834] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level,
low) -> IRQ 19
[ 63.301845] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 19,
latency: 64, mmio: 0xcfffbc00
[ 63.301853] saa7130[0]: subsystem: 185b:c200, board: UNKNOWN/GENERIC
[card=0,autodetected]
[ 63.301865] saa7130[0]: board init: gpio is 4c0000
[ 63.488359] input: PC Speaker as /class/input/input4
[ 63.494476] saa7130[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494489] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494497] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494505] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494513] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494521] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff 04
ff 00 05 30 17 cb
[ 63.494529] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494537] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 63.494668] saa7130[0]: registered device video0 [v4l2]
[ 63.494712] saa7130[0]: registered device vbi0
[ 63.570882] parport_pc 00:09: reported by Plug and Play ACPI
[ 63.570980] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 63.608103] saa7134 ALSA driver for DMA sound loaded
[ 63.608153] saa7130[0]/alsa: saa7130[0] at 0xcfffbc00 irq 19
registered as card -2
[ 64.435939] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level,
low) -> IRQ 19
[ 64.508302] usbcore: registered new interface driver snd-usb-audio
[ 64.748718]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c:
usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04B8
pid 0x0005
[ 64.748759] usbcore: registered new interface driver usblp
[ 64.748764]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c:
v0.13: USB Printer Device Class driver
[ 64.757424] intel8x0_measure_ac97_clock: measured 54842 usecs
[ 64.757432] intel8x0: clocking to 48000
[ 64.789499] usbcore: registered new interface driver xpad
[ 64.789507]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c:
driver for Xbox controllers v0.1.6
[ 65.415718] lp0: using parport0 (interrupt-driven).
[ 65.487096] Adding 586332k swap on /dev/sdb5. Priority:-1 extents:1
across:586332k
[ 65.863409] EXT3 FS on sdb1, internal journal
[ 69.302972] DLM (built Oct 14 2007 23:06:04) installed
[ 69.349901] GFS2 (built Oct 14 2007 23:06:38) installed
[ 69.372562] Lock_DLM (built Oct 14 2007 23:06:53) installed
[ 69.585675] NET: Registered protocol family 10
[ 69.585809] lo: Disabled Privacy Extensions
[ 81.078318] SCTP: Hash tables configured (established 16384 bind 16384)
[ 81.106871] Module sctp cannot be unloaded due to unsafe usage in
/build/buildd/linux-source-2.6.22-2.6.22/net/sctp/protocol.c:1179
[ 81.514937] No dock devices found.
[ 81.847986] input: Power Button (FF) as /class/input/input5
[ 81.854721] ACPI: Power Button (FF) [PWRF]
[ 81.902217] input: Power Button (CM) as /class/input/input6
[ 81.909070] ACPI: Power Button (CM) [PWRB]
[ 81.947551] input: Sleep Button (CM) as /class/input/input7
[ 81.947970] ACPI: Sleep Button (CM) [SLPB]
[ 87.091959] eth0: Media Link On 100mbps full-duplex
[ 90.517216] ppdev: user-space parallel port driver
[ 91.055007] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 91.055165] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 91.055171] agpgart: SiS delay workaround: giving bridge time to recover.
[ 91.068239] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 91.690199] audit(1193862559.135:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5799 profile="/usr/sbin/cupsd"
[ 97.825424] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 97.825433] apm: overridden by ACPI.
[ 104.598656] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 104.598667] ata1.01: (BMDMA stat 0x64)
[ 104.598675] ata1.01: cmd ca/00:10:7f:02:18/00:00:00:00:00/f0 tag 0
cdb 0x0 data 8192 out
[ 104.598677] res 51/84:00:7f:02:18/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 104.598691] ata1: soft resetting port
[ 104.786217] ata1.00: configured for UDMA/33
[ 104.801449] ata1.01: configured for UDMA/33
[ 104.801466] ata1: EH complete
[ 104.802054] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 104.802602] sd 0:0:0:0: [sda] Write Protect is off
[ 104.802607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 104.803205] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 104.803971] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 104.804281] sd 0:0:1:0: [sdb] Write Protect is off
[ 104.804285] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 104.827044] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 104.831672] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 104.832169] sd 0:0:0:0: [sda] Write Protect is off
[ 104.832176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 104.835671] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 104.848792] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 104.870030] sd 0:0:1:0: [sdb] Write Protect is off
[ 104.870040] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 104.872300] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 105.396944] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 106.681714] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 106.694936] NFSD: starting 90-second grace period
[ 107.190779] Failure registering capabilities with primary security
module.
[ 112.405617] Bluetooth: Core ver 2.11
[ 112.406065] NET: Registered protocol family 31
[ 112.406069] Bluetooth: HCI device and connection manager initialized
[ 112.406074] Bluetooth: HCI socket layer initialized
[ 112.542476] Bluetooth: L2CAP ver 2.8
[ 112.542483] Bluetooth: L2CAP socket layer initialized
[ 112.601277] Bluetooth: RFCOMM socket layer initialized
[ 112.601661] Bluetooth: RFCOMM TTY layer initialized
[ 112.601666] Bluetooth: RFCOMM ver 1.8
[ 112.837101] NET: Registered protocol family 17
[ 118.174164] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=410 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=390
[ 118.174645] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=390 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=370
[ 118.308113] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=390 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=370
[ 125.732180] eth0: no IPv6 routers present
[ 134.712069] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 134.712079] ata1.01: (BMDMA stat 0x64)
[ 134.712087] ata1.01: cmd ca/00:00:cf:7e:00/00:00:00:00:00/f0 tag 0
cdb 0x0 data 131072 out
[ 134.712089] res 51/84:00:cf:7e:00/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 134.712103] ata1: soft resetting port
[ 134.897888] ata1.00: configured for UDMA/33
[ 134.913161] ata1.01: configured for UDMA/33
[ 134.913178] ata1: EH complete
[ 135.057220] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 135.057226] ata1.01: (BMDMA stat 0x64)
[ 135.057233] ata1.01: cmd ca/00:00:cf:7e:00/00:00:00:00:00/f0 tag 0
cdb 0x0 data 131072 out
[ 135.057235] res 51/84:00:cf:7e:00/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 135.057247] ata1: soft resetting port
[ 135.245616] ata1.00: configured for UDMA/33
[ 135.260878] ata1.01: configured for UDMA/33
[ 135.260887] ata1: EH complete
[ 135.261082] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 135.410542] ata1.01: limiting speed to UDMA/25:PIO4
[ 135.410547] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 135.410550] ata1.01: (BMDMA stat 0x64)
[ 135.410556] ata1.01: cmd ca/00:00:cf:7e:00/00:00:00:00:00/f0 tag 0
cdb 0x0 data 131072 out
[ 135.410559] res 51/84:00:cf:7e:00/00:00:00:00:00/f0 Emask
0x10 (ATA bus error)
[ 135.410568] ata1: soft resetting port
[ 135.597314] ata1.00: configured for UDMA/33
[ 135.612611] ata1.01: configured for UDMA/25
[ 135.612630] ata1: EH complete
[ 135.612855] sd 0:0:0:0: [sda] Write Protect is off
[ 135.612859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 135.643822] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 135.655906] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 135.656138] sd 0:0:1:0: [sdb] Write Protect is off
[ 135.656142] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 135.675897] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 135.687520] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 135.700032] sd 0:0:0:0: [sda] Write Protect is off
[ 135.700036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 135.732737] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 135.740028] sd 0:0:1:0: [sdb] 25434228 512-byte hardware sectors
(13022 MB)
[ 135.740148] sd 0:0:1:0: [sdb] Write Protect is off
[ 135.740151] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 135.762867] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1916.887473] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=342 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=322
[ 1916.976729] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=342 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=322
[ 1916.976941] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=351 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=331
[ 1917.182645] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=351 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=331
[ 1917.182869] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=394 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=374
[ 1917.188150] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=394 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=374
[ 1917.286081] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=422 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=402
[ 1917.488844] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=408 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=388
[ 1917.695453] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=406 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=386
[ 1917.911408] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=351 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=331
[ 1918.156341] Inbound IN=eth0 OUT= MAC= SRC=192.168.0.188
DST=239.255.255.250 LEN=390 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=370
 --- lspci ---
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL
Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 91)
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] (rev a2)
> I try to discover the loaded kernel module for your TV tuner card.
> After we can pass to it some load parameters.
>
> Thank you
>
>

--
Lets stop killing each other, lets all live in peace.
Too much pain, too much suffering.

Ok your Video Tuner Card is:

Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

and the

saa7130/34: v4l2 driver version 0.2.14

is loaded by the system and it is recognized as generic

saa7130[0]: subsystem: 185b:c200, board: UNKNOWN/GENERIC [card=0,autodetected]

Now i try to search some useful kernel parameters to make audio works.

HTH

elart.it wrote:
> Your question #16655 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/16655
>
> Status: Open => Answered
>
> elart.it proposed the following answer:
> Ok your Video Tuner Card is:
>
> Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast
> Decoder (rev 01)
>
> and the
>
> saa7130/34: v4l2 driver version 0.2.14
>
> is loaded by the system and it is recognized as generic
>
> saa7130[0]: subsystem: 185b:c200, board: UNKNOWN/GENERIC
> [card=0,autodetected]
>
> Now i try to search some useful kernel parameters to make audio works.
>
> HTH
>
>
Ok, thank you very much for your help, I do appreciate it.

Mike.

--
Lets stop killing each other, lets all live in peace.
Too much pain, too much suffering.

Sorry but is too difficult from here to give you the right parameters to the modules and test them.

I found a lot of pages, some here:
http://ubuntuforums.org/archive/index.php/t-431825.html

You have this alsa "sound" module loaded by the kernel:
saa7134_alsa 15392 0

http://www.linuxtv.org/v4lwiki/index.php/Saa713x_devices
http://www.linuxtv.org/v4lwiki/index.php/Saa7134-alsa#Insmod_parameters
http://www.linuxtv.org/v4lwiki/index.php/Saa713x_devices

to test different modules parameter you must first unload module modulename
sudo modprobe -r modulename
then reload it with different options:
sudo modprobe modulename option1 option2 ...

Then test if sound is working.

I hope someone else have this card good configured will answer you.

Bye.

I forget also this pages:
http://www.clubic.com/forum/os-alternatifs/linux/carte-tv-sous-ubuntu-chipset-saa7130-id218892-page1.html
http://gentoo-wiki.com/HARDWARE_saa7134

HTH

Try this trick: http://ubuntuforums.org/showpost.php?p=6381757&postcount=2