PCI: Cannot allocate resource region

Asked by fmeazza

Good morning, i've some error during boot:

[ 15.742871] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 15.742922] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 15.742970] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 15.743017] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0

My pc seems to o well even if there are these segnalation. My machine is an Acer Aspire 3022WLMI with ati Mobility Radeon X600.

I post you the output of the command dmesg | grep PCI

[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 15.684867] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 15.684870] PCI: Using configuration type 1
[ 15.684872] Setting up standard PCI resources
[ 15.727148] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.727154] PCI: Probing PCI hardware (bus 00)
[ 15.728761] PCI: Transparent bridge - 0000:00:14.4
[ 15.728870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.729067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 15.729206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 15.729344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 15.729491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 15.732668] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[ 15.732787] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 15.732902] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 15.733016] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[ 15.733130] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 15.733243] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 15.733357] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
[ 15.733471] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[ 15.742860] PCI: Using ACPI for IRQ routing
[ 15.742863] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.742871] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 15.742922] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 15.742970] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 15.743017] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 15.794506] PCI: Bridge: 0000:00:02.0
[ 15.794519] PCI: Bridge: 0000:00:06.0
[ 15.794528] PCI: Bridge: 0000:00:07.0
[ 15.794546] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 15.794572] PCI: Bridge: 0000:00:14.4
[ 15.794604] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.794611] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 15.794618] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 15.794763] ACPI: PCI Interrupt Link [LNKE] disabled and referenced, BIOS bug
[ 15.794816] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 15.794819] PCI: setting IRQ 11 as level-triggered
[ 15.794824] ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 16.559652] PCI: MSI quirk detected. MSI deactivated.
[ 16.990150] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.990235] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 16.990307] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 17.368719] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 17.368724] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 17.368734] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 4.312000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 4.312000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.484000] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.648000] ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.896000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.896000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 4.896000] PCI: setting IRQ 10 as level-triggered
[ 4.896000] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 7.288000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 7.288000] ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 7.340000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.348000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 7.348000] ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 19.620000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.692000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.536000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[ 20.536000] ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 20.572000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 20.572000] Yenta: Routing CardBus interrupts to PCI
[ 20.804000] Yenta: ISA IRQ mask 0x00f8, PCI irq 11
[ 20.804000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 20.804000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 20.804000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
[ 20.804000] ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 21.048000] ACPI: PCI Interrupt 0000:06:06.3[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 21.756000] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 21.868000] ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 31.412000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 31.412000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11

And the output of the command lspci:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
David Portwood
Solved:
Last query:
Last reply:
Revision history for this message
David Portwood (dzportwood) said :
#1

Is your machine not booting at all? or are these messages you recieve on boot?
Thanks,
David P.

Revision history for this message
fmeazza (flavio-meazza) said :
#2

No, the machine boot well, i receive those messages during boot, but the machine boot well and all goes well.

Revision history for this message
David Portwood (dzportwood) said :
#3

Id just close this, this is a pretty well known thing, some solutions include turning ACPI off, updating the BIOS, none seem to work, and these errors don't seem to cause any bad behavior, or system hangs.
Thanks,
David P.

Revision history for this message
fmeazza (flavio-meazza) said :
#4

I confirmed you that these errors don't cause any bad behavior. Thank's a lot. So i must not consider them?

Revision history for this message
Best David Portwood (dzportwood) said :
#5

Thats correct, thanks for asking though, we welcome any questions and
hope you will continue to utilize the community support resources, and
you can mark this as solved :)
Thanks,
David P.

fmeazza wrote:
> Question #15194 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/15194
>
> Status: Answered => Open
>
> fmeazza is still having a problem:
> I confirmed you that these errors don't cause any bad behavior. Thank's
> a lot. So i must not consider them?
>
>

Revision history for this message
fmeazza (flavio-meazza) said :
#6

Thanks David Portwood, that solved my question.