Wlan, printer and terminal problem plus suggestion about Help

Hi!

First off -- I am new to Linux. I can install programs and write letters in Windows, which I have just left for Ubuntu. So...

I installed the newest Ubuntu on an Dell Inspiron 5100 (Pentium 4, memory: 512, AGP128, 40Gb hd,A-Link WL54PC Wlan card.

There is too much development happening on this front and the internet offers too many (often in terms a newbie does not understand) solutions for the problems I experienced.

So: who would walk me through possible solutions step-bystep?

Here are my problems:
a) Wlan does not work
b) The terminal rejects my administrator password
c) The printer works fine with e.g., Gedit, but the output is horrible under OpenOffice.
d) More a suggestion than a question: during installation I needed too often help via the internet -- not possible as long as I did not get my internet connection to work! More help might be included on the cd.

Remarks:

Wlan card: My neighbor suggests using the Windows driver (emulated), but has not told me how to do that.
Terminal (from Accessories): It does not matter whether I use su + password or sudo. "Authentication failure" is returned. I can install using Synaptic. In fact, everywhere else where the password is asked for, it is accepted.

The answer can be in English, German, Dutch or Finnish.

dmesg listing:

root@bob-laptop:/home/bob# dmesg
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4. 0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[17179569.184000] BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 130928
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 126832 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x0 00f78e0
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff76dd0
[17179569.184000] ACPI: FADT (v001 INTEL NBGV 0x06040000 PTL 0x00000003) @ 0x1ff7af64
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff7afd8
[17179569.184000] ACPI: DSDT (v001 INTEL Brkdle_G 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:d f800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdc3 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01401000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 2392.380 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.968000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte s)
[17179569.968000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.984000] Memory: 508340k/523712k available (1976k kernel code, 14804k r eserved, 606k data, 288k init, 0k highmem)
[17179569.984000] Checking if this processor honours the WP bit even in supervis or mode... Ok.
[17179570.064000] Calibrating delay using timer specific routine.. 4789.13 BogoM IPS (lpj=9578267)
[17179570.064000] Security Framework v1.0.0 initialized
[17179570.064000] SELinux: Disabled at boot.
[17179570.064000] Mount-cache hash table entries: 512
[17179570.064000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
[17179570.064000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 0 0000000 00004400 00000000 00000000
[17179570.064000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179570.064000] CPU: L2 cache: 512K
[17179570.064000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000008 0 00004400 00000000 00000000
[17179570.064000] mtrr: v2.0 (20020519)
[17179570.064000] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[17179570.064000] Enabling fast FPU save and restore... done.
[17179570.064000] Enabling unmasked SIMD FPU exception support... done.
[17179570.064000] Checking 'hlt' instruction... OK.
[17179570.080000] checking if image is initramfs... it is
[17179570.648000] Freeing initrd memory: 6617k freed
[17179570.664000] ACPI: Looking for DSDT ... not found!
[17179570.664000] ACPI: setting ELCR to 0200 (from 0c00)
[17179570.668000] NET: Registered protocol family 16
[17179570.668000] EISA bus registered
[17179570.668000] ACPI: bus type pci registered
[17179570.668000] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
[17179570.668000] PCI: Using configuration type 1
[17179570.668000] ACPI: Subsystem revision 20051216
[17179570.676000] ACPI: Interpreter enabled
[17179570.676000] ACPI: Using PIC for interrupt routing
[17179570.676000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.676000] PCI: Probing PCI hardware (bus 00)
[17179570.700000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179570.700000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179570.700000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.700000] Boot video device is 0000:01:00.0
[17179570.700000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.700000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.704000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179570.704000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[17179570.704000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[17179570.704000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
[17179570.704000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
[17179570.704000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *0, disab led.
[17179570.704000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
[17179570.704000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disab led.
[17179570.708000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disab led.
[17179570.708000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disab led.
[17179570.708000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 14 15)
[17179570.748000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.748000] pnp: PnP ACPI init
[17179570.768000] pnp: PnP ACPI: found 7 devices
[17179570.768000] PnPBIOS: Disabled by ACPI PNP
[17179570.768000] PCI: Using ACPI for IRQ routing
[17179570.768000] PCI: If a device doesn't work, try "pci=routeirq". If it help s, post a report
[17179570.772000] PCI: Bridge: 0000:00:01.0
[17179570.772000] IO window: 3000-3fff
[17179570.772000] MEM window: e0100000-e01fffff
[17179570.772000] PREFETCH window: f0000000-f7ffffff
[17179570.772000] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[17179570.772000] IO window: 00004000-000040ff
[17179570.772000] IO window: 00004400-000044ff
[17179570.772000] PREFETCH window: 30000000-31ffffff
[17179570.772000] MEM window: 34000000-35ffffff
[17179570.772000] PCI: Bridge: 0000:00:1e.0
[17179570.772000] IO window: 4000-4fff
[17179570.772000] MEM window: e0200000-e02fffff
[17179570.772000] PREFETCH window: 30000000-31ffffff
[17179570.772000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.772000] **** SET: Misaligned resource pointer: df90a7c2 Type 07 Len 0
[17179570.772000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[17179570.772000] PCI: setting IRQ 10 as level-triggered
[17179570.772000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179570.772000] PCI: Setting latency timer of device 0000:02:04.0 to 64
[17179570.772000] Simple Boot Flag at 0x38 set to 0x1
[17179570.772000] audit: initializing netlink socket (disabled)
[17179570.772000] audit(1155286297.772:1): initialized
[17179570.772000] VFS: Disk quotas dquot_6.5.1
[17179570.772000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.772000] Initializing Cryptographic API
[17179570.772000] io scheduler noop registered
[17179570.772000] io scheduler anticipatory registered
[17179570.772000] io scheduler deadline registered
[17179570.772000] io scheduler cfq registered
[17179570.772000] isapnp: Scanning for PnP cards...
[17179571.128000] isapnp: No Plug & Play device found
[17179571.144000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[17179571.152000] i8042.c: Detected active multiplexing controller, rev 1.9.
[17179571.156000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.156000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.156000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.160000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.160000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.160000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar ing enabled
[17179571.160000] **** SET: Misaligned resource pointer: df98a3c2 Type 07 Len 0
[17179571.160000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179571.160000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 ( level, low) -> IRQ 10
[17179571.160000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179571.160000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b locksize
[17179571.160000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.160000] ide: Assuming 33MHz system bus speed for PIO modes; override w ith idebus=xx
[17179571.160000] mice: PS/2 mouse device common for all mice
[17179571.164000] EISA: Probing bus 0 at eisa.0
[17179571.164000] Cannot allocate resource for EISA slot 1
[17179571.164000] Cannot allocate resource for EISA slot 2
[17179571.164000] Cannot allocate resource for EISA slot 3
[17179571.164000] Cannot allocate resource for EISA slot 4
[17179571.164000] EISA: Detected 0 cards.
[17179571.164000] NET: Registered protocol family 2
[17179571.196000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.204000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes )
[17179571.204000] TCP established hash table entries: 32768 (order: 5, 131072 by tes)
[17179571.204000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.204000] TCP: Hash tables configured (established 32768 bind 32768)
[17179571.204000] TCP reno registered
[17179571.204000] TCP bic registered
[17179571.204000] NET: Registered protocol family 1
[17179571.204000] NET: Registered protocol family 8
[17179571.204000] NET: Registered protocol family 20
[17179571.204000] Using IPI Shortcut mode
[17179571.204000] ACPI wakeup devices:
[17179571.204000] LID LANC AC97 USB1 USB2 EUSB
[17179571.204000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.204000] Freeing unused kernel memory: 288k freed
[17179571.256000] vga16fb: initializing
[17179571.256000] vga16fb: mapped to 0xc00a0000
[17179571.380000] Console: switching to colour frame buffer device 80x25
[17179571.380000] fb0: VGA16 VGA frame buffer device
[17179572.448000] Capability LSM initialized
[17179572.576000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179572.576000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.580000] ACPI: Thermal Zone [THRM] (34 C)
[17179573.144000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179573.144000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179573.144000] **** SET: Misaligned resource pointer: df9f43c2 Type 07 Len 0
[17179573.144000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179573.144000] PCI: setting IRQ 11 as level-triggered
[17179573.144000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 ( level, low) -> IRQ 11
[17179573.144000] ICH4: chipset revision 2
[17179573.144000] ICH4: not 100% native mode: will probe irqs later
[17179573.144000] ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb :pio
[17179573.144000] ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:DMA, hdd :pio
[17179573.144000] Probing IDE interface ide0...
[17179573.880000] hda: MATSHITA CD-RW/DVD-ROM UJDA740, ATAPI CD/DVD-ROM drive
[17179574.552000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.552000] Probing IDE interface ide1...
[17179574.840000] hdc: IC25N040ATCS04-0, ATA DISK drive
[17179575.512000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.544000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.544000] Uniform CD-ROM driver Revision: 3.20
[17179575.552000] hdc: max request size: 128KiB
[17179575.552000] hdc: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16 /63, UDMA(100)
[17179575.552000] hdc: cache flushes not supported
[17179575.552000] hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 >
[17179576.004000] usbcore: registered new driver usbfs
[17179576.004000] usbcore: registered new driver hub
[17179576.004000] USB Universal Host Controller Interface driver v2.3
[17179576.004000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179576.004000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.004000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.004000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus nu mber 1
[17179576.004000] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001cc0
[17179576.008000] hub 1-0:1.0: USB hub found
[17179576.008000] hub 1-0:1.0: 2 ports detected
[17179576.072000] ieee1394: Initialized config rom entry `ip1394'
[17179576.112000] **** SET: Misaligned resource pointer: dfcda202 Type 07 Len 0
[17179576.112000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179576.112000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 ( level, low) -> IRQ 11
[17179576.112000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.112000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.112000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus nu mber 2
[17179576.112000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001ce0
[17179576.112000] hub 2-0:1.0: USB hub found
[17179576.112000] hub 2-0:1.0: 2 ports detected
[17179576.216000] **** SET: Misaligned resource pointer: dfb40dc2 Type 07 Len 0
[17179576.216000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[17179576.216000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 ( level, low) -> IRQ 10
[17179576.216000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.216000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.216000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.216000] PCI: cache line size of 128 is not supported by device 0000:00 :1d.7
[17179576.216000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus nu mber 3
[17179576.216000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0000000
[17179576.220000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 D ec 2004
[17179576.220000] hub 3-0:1.0: USB hub found
[17179576.220000] hub 3-0:1.0: 4 ports detected
[17179576.324000] ohci1394: $Rev: 1313 $ Ben Collins <email address hidden>
[17179576.324000] ACPI: PCI Interrupt 0000:02:04.1[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179576.372000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e0206 000-e02067ff] Max Packet=[2048]
[17179576.464000] Attempting manual resume
[17179576.500000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.508000] kjournald starting. Commit interval 5 seconds
[17179576.960000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179577.644000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c04f42331d1061 ]
[17179591.744000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179591.796000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179591.872000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.892000] agpgart: Detected an Intel 845G Chipset.
[17179591.896000] agpgart: AGP aperture is 128M @ 0xe8000000
[17179591.912000] hw_random: RNG not detected
[17179592.280000] Real Time Clock Driver v1.12
[17179592.492000] usbcore: registered new driver hiddev
[17179592.536000] input: Logitech USB Mouse as /class/input/input1
[17179592.536000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00 :1d.1-1
[17179592.536000] usbcore: registered new driver usbhid
[17179592.536000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179592.620000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 ( level, low) -> IRQ 10
[17179592.620000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179592.752000] input: PC Speaker as /class/input/input2
[17179592.936000] ts: Compaq touchscreen protocol output
[17179593.392000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x8 04713/0x0
[17179593.440000] intel8x0_measure_ac97_clock: measured 55295 usecs
[17179593.440000] intel8x0: clocking to 48000
[17179593.440000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179593.448000] b44.c:v0.97 (Nov 30, 2005)
[17179593.448000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 10 ( level, low) -> IRQ 10
[17179593.448000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:9c:b7:23
[17179593.452000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179593.452000] Yenta: CardBus bridge found at 0000:02:04.0 [1028:0149]
[17179593.452000] Yenta: Enabling burst memory read transactions
[17179593.452000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179593.452000] Yenta: Routing CardBus interrupts to PCI
[17179593.452000] Yenta TI: socket 0000:02:04.0, mfunc 0x00000102, devctl 0x66
[17179593.684000] Yenta: ISA IRQ mask 0x0000, PCI irq 10
[17179593.684000] Socket status: 30000020
[17179593.684000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 t o #06
[17179593.684000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[17179593.684000] cs: IO port probe 0x4000-0x4fff: clean.
[17179593.684000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fff ff
[17179593.684000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffff ff
[17179594.340000] pccard: CardBus card inserted into slot 0
[17179594.416000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
[17179594.416000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179594.416000] cs: IO port probe 0x820-0x8ff: clean.
[17179594.416000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.420000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.440000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[17179594.440000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179594.440000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179594.440000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179594.644000] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Chan nel
[17179594.644000] rt2500 EEPROM: 3 3 3 3 3 3 3 3 3 3 3 3 3 3 dBm Maximum
[17179594.832000] lp: driver loaded but no devices found
[17179594.924000] SCSI subsystem initialized
[17179594.936000] NET: Registered protocol family 17
[17179594.952000] sbp2: $Rev: 1306 $ Ben Collins <email address hidden>
[17179594.952000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1 )
[17179594.952000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179595.028000] Adding 1421712k swap on /dev/hdc5. Priority:-1 extents:1 acro ss:1421712k
[17179595.180000] EXT3 FS on hdc3, internal journal
[17179595.380000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179595.380000] md: bitmap version 4.39
[17179596.336000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@ redhat.com
[17179596.836000] b44: eth0: Link is up at 100 Mbps, full duplex.
[17179596.836000] b44: eth0: Flow control is on for TX and on for RX.
[17179597.136000] cdrom: open failed.
[17179599.312000] NET: Registered protocol family 10
[17179599.312000] lo: Disabled Privacy Extensions
[17179599.312000] IPv6 over IPv4 tunneling driver
[17179604.116000] ACPI: AC Adapter [ACAD] (off-line)
[17179604.220000] ACPI: Battery Slot [BAT1] (battery present)
[17179604.312000] ACPI: Power Button (FF) [PWRF]
[17179604.312000] ACPI: Sleep Button (CM) [SLPB]
[17179604.312000] ACPI: Lid Switch [LID]
[17179604.312000] ACPI: Power Button (CM) [PWRB]
[17179604.436000] ibm_acpi: ec object not found
[17179604.472000] pcc_acpi: loading...
[17179604.572000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179604.572000] ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no)
[17179609.464000] ra0: no IPv6 routers present
[17179609.660000] [drm] Initialized drm 1.0.1 20051102
[17179609.736000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 ( level, low) -> IRQ 10
[17179609.736000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179609.928000] eth0: no IPv6 routers present
[17179610.700000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179610.700000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[17179610.700000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[17179610.788000] ppdev: user-space parallel port driver
[17179611.196000] [drm] Setting GART location based on new memory map
[17179611.196000] [drm] writeback test succeeded in 1 usecs
[17179612.116000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179612.116000] apm: overridden by ACPI.
[17179616.452000] Bluetooth: Core ver 2.8
[17179616.452000] NET: Registered protocol family 31
[17179616.452000] Bluetooth: HCI device and connection manager initialized
[17179616.452000] Bluetooth: HCI socket layer initialized
[17179616.504000] Bluetooth: L2CAP ver 2.8
[17179616.504000] Bluetooth: L2CAP socket layer initialized
[17179616.564000] Bluetooth: RFCOMM socket layer initialized
[17179616.564000] Bluetooth: RFCOMM TTY layer initialized
[17179616.564000] Bluetooth: RFCOMM ver 1.7
[17180813.508000] pccard: card ejected from slot 0
[17180813.568000] ACPI: PCI interrupt for device 0000:03:00.0 disabled