conflict between rt2800usb and rt2870sta drivers -> Bus 001 Device 004: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter often disconnects by itself on Dell OptiPlex SX280 in Ubuntu 10.10
I have a wireless wusb-600 linksys adapter and it connects for a few minutes then disconnects, when I click on the reconnect, it won't connect... the chit set is rt2870
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Can you give the output of:
sudo lshw -C network
The brand is moot in linux, we need to know the chip which we currently do not know.
Can you also browse a bit and have the connection drop, then run:
dmesg | tail
and give the output
Thanks
|
Revision history for this message
|
#2 |
Hi,
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
|
Revision history for this message
|
#3 |
werner@
[sudo] password for werner:
Sorry, try again.
[sudo] password for werner:
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Get:1 http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Get:2 http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:3 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Fetched 228kB in 1s (164kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
libhal1 libhd16
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 3 not upgraded.
Need to get 849kB of archives.
After this operation, 2,286kB of additional disk space will be used.
Do you want to continue [Y/n]?
|
Revision history for this message
|
#4 |
Do you want to continue [Y/n]?
Press Y and <ENTER> to continue.
Then send the rest of the output.
|
Revision history for this message
|
#5 |
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 849kB in 1s (524kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 120599 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-0ubuntu6) ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 01
serial: 00:12:3f:a5:b6:22
capacity: 1GB/s
width: 64 bits
clock: 33MHz
resources: irq:16 memory:
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:6
logical name: wlan0
serial: 00:1e:e5:dc:4e:20
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:1E:E5:77:43:C0
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation 82915G/
00:01.0 PCI bridge [0604]: Intel Corporation 82915G/
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Bus 005 Device 002: ID 03f0:0512 Hewlett-Packard DeckJet 450
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 413c:2002 Dell Computer Corp. SK-8125 Keyboard
Bus 003 Device 002: ID 413c:1002 Dell Computer Corp. Keyboard Hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 0UD789
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Pentium(R) 4 CPU 3.20GHz
/0/400/700 memory 16KiB L1 cache
/0/400/701 memory 1MiB L2 cache
/0/400/0.1 processor Logical CPU
/0/400/0.2 processor Logical CPU
/0/1000 memory 1GiB System Memory
/0/1000/0 memory DIMM DDR Synchronous 533 MHz (1.9
/0/1000/1 memory 1GiB DIMM DDR Synchronous 533 MHz
/0/100 bridge 82915G/
/0/100/1 bridge 82915G/
/0/100/2 display 82915G/GV/910GL Integrated Graphi
/0/100/2.1 display 82915G Integrated Graphics Contro
/0/100/1c bridge 82801FB/
/0/100/1c/0 eth0 network NetXtreme BCM5751 Gigabit Etherne
/0/100/1d bus 82801FB/
/0/100/1d.1 bus 82801FB/
/0/100/1d.2 bus 82801FB/
/0/100/1d.3 bus 82801FB/
/0/100/1d.7 bus 82801FB/
/0/100/1e bridge 82801 PCI Bridge
/0/100/1e.2 multimedia 82801FB/
/0/100/1f bridge 82801FB/FR (ICH6/ICH6R) LPC Inter
/0/100/1f.1 scsi0 storage 82801FB/
/0/100/1f.1/0.0.0 /dev/cdrom disk RW/DVD GCC-4243N
/0/100/1f.2 scsi2 storage 82801FB/FW (ICH6/ICH6W) SATA Cont
/0/100/1f.2/0.0.0 /dev/sda disk 80GB ST380815AS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 71GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 2998MiB Extended partition
/0/100/
/0/100/1f.3 bus 82801FB/
/1 wlan0 network Wireless interface
Linux werner-
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.008643] SMP alternatives: switching to UP code
[ 0.217860] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.020071] HEST: Table is not found!
[ 1.020527] usbcore: registered new interface driver usbfs
[ 1.020544] usbcore: registered new interface driver hub
[ 1.020576] usbcore: registered new device driver usb
[ 1.024025] Switching to clocksource tsc
[ 1.072141] pnp: PnP ACPI: found 11 devices
[ 1.278780] ERST: Table is not found!
[ 1.484514] hub 1-0:1.0: USB hub found
[ 1.484919] hub 2-0:1.0: USB hub found
[ 1.485230] hub 3-0:1.0: USB hub found
[ 1.485536] hub 4-0:1.0: USB hub found
[ 1.485836] hub 5-0:1.0: USB hub found
[ 1.485982] PNP: No PS/2 controller found. Probing ports directly.
[ 1.540025] device-mapper: multipath: version 1.1.1 loaded
[ 1.540029] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.549860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.896269] isapnp: No Plug & Play device found
[ 2.020017] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 2.532012] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.710268] hub 3-2:1.0: USB hub found
[ 2.956024] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 3.380011] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3.661341] usb 3-2.1: new full speed USB device using uhci_hcd and address 3
[ 5.991493] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:12:3f:a5:b6:22
[ 5.991499] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 5.991503] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.991506] tg3 0000:02:00.0: eth0: dma_rwctrl[
[ 5.993161] usbcore: registered new interface driver hiddev
[ 6.008925] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/
[ 6.009498] generic-usb 0003:045E:
[ 6.013496] input: Dell Dell USB Keyboard Hub as /devices/
[ 6.014030] generic-usb 0003:413C:
[ 6.020753] input: Dell Dell USB Keyboard Hub as /devices/
[ 6.020866] generic-usb 0003:413C:
[ 6.020896] usbcore: registered new interface driver usbhid
[ 6.020899] usbhid: USB HID core driver
[ 14.697627] lp: driver loaded but no devices found
[ 14.776185] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.776187] intel_rng: don't want to disable this in firmware setup, and if
[ 15.138605] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0512
[ 15.138916] usbcore: registered new interface driver usblp
[ 15.652408] Registered led device: rt2800usb-
[ 15.652433] Registered led device: rt2800usb-
[ 15.652459] Registered led device: rt2800usb-
[ 15.653368] usbcore: registered new interface driver rt2800usb
[ 15.654366] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.698086] rtusb init --->
[ 15.698938] usbcore: registered new interface driver rt2870
[ 16.156287] ADDRCONF(
[ 16.550282] ADDRCONF(
[ 17.187615] Console: switching to colour frame buffer device 128x48
[ 21.766056] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 148.427261] wlan0: authenticate with 00:1e:e5:77:43:c0 (try 1)
[ 148.428891] wlan0: authenticated
[ 148.428913] wlan0: associate with 00:1e:e5:77:43:c0 (try 1)
[ 148.432599] wlan0: RX AssocResp from 00:1e:e5:77:43:c0 (capab=0x401 status=0 aid=2)
[ 148.432604] wlan0: associated
[ 148.451395] ADDRCONF(
[ 159.248012] wlan0: no IPv6 routers present
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:"linksys"
Bit Rate=54 Mb/s Tx-Power=7 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=50 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist twl4030_wdt
options iwlagn 11n_disable=1
> hal.1: read hal dataprocess 1764: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
25: PCI 200.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.M_7vcgzSjL6
Parent ID: z8Q3.hdHR1LU2D6A
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Dell Optiplex GX280"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1677 "NetXtreme BCM5751 Gigabit Ethernet PCI Express"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0179 "Optiplex GX280"
Revision: 0x01
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xdfcf0000-
IRQ: 16 (5321 events)
HW Address: 00:12:3f:a5:b6:22
Link detected: no
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
43: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: MtLc.XnRr0TlXYIE
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/
SysFS BusID: 1-6:1.0
Hardware Class: network
Model: "Cisco-Linksys LLC Dual-Band Wireless-N USB Network Adapter"
Hotplug: USB
Vendor: usb 0x1737 "Cisco-Linksys LLC"
Device: usb 0x0071 "Dual-Band Wireless-N USB Network Adapter"
Revision: "1.01"
Driver: "rt2800usb"
Driver Modules: "rt2800usb"
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 00:1e:e5:dc:4e:20
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 44 46 48 149 151 153 157 159 161 165
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.22 5.23 5.24 5.745 5.755 5.765 5.785 5.795 5.805 5.825
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v1737p0071
Driver Info #0:
Driver Status: rt2800usb is active
Driver Activation Cmd: "modprobe rt2800usb"
Driver Info #1:
Driver Status: rt2870sta is active
Driver Activation Cmd: "modprobe rt2870sta"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #38 (Hub)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
binfmt_misc 6599 1
rt2870sta 405890 0
arc4 1165 2
snd_intel8x0 25632 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,
rt2800usb 8367 0
i915 291004 3
snd_seq_midi 4588 0
rt2800lib 28897 1 rt2800usb
rt2x00usb 9779 2 rt2800usb,rt2800lib
snd_rawmidi 17783 1 snd_seq_midi
rt2x00lib 27275 2 rt2800lib,rt2x00usb
led_class 2633 1 rt2x00lib
snd_seq_midi_event 6047 1 snd_seq_midi
drm_kms_helper 30200 1 i915
snd_seq 47174 2 snd_seq_
mac80211 231541 2 rt2x00usb,rt2x00lib
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
drm 168054 4 i915,drm_kms_helper
cfg80211 144470 2 rt2x00lib,mac80211
usblp 10651 0
snd 49006 11 snd_intel8x0,
ppdev 5556 0
crc_ccitt 1351 2 rt2870sta,rt2800usb
psmouse 59033 0
intel_agp 26360 2 i915
joydev 8735 0
dcdbas 5402 0
parport_pc 26058 1
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_intel8x0,
serio_raw 4022 0
i2c_algo_bit 5168 1 i915
video 18712 1 i915
agpgart 32011 2 drm,intel_agp
output 1883 1 video
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
tg3 123310 0
werner@
|
Revision history for this message
|
#6 |
werner@
[sudo] password for werner:
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
*-network
description: Ethernet interface
product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 01
serial: 00:12:3f:a5:b6:22
capacity: 1GB/s
width: 64 bits
clock: 33MHz
resources: irq:16 memory:
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:6
logical name: wlan0
serial: 00:1e:e5:dc:4e:20
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:1E:E5:77:43:C0
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation 82915G/
00:01.0 PCI bridge [0604]: Intel Corporation 82915G/
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Bus 005 Device 002: ID 03f0:0512 Hewlett-Packard DeckJet 450
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 413c:2002 Dell Computer Corp. SK-8125 Keyboard
Bus 003 Device 002: ID 413c:1002 Dell Computer Corp. Keyboard Hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 0UD789
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Pentium(R) 4 CPU 3.20GHz
/0/400/700 memory 16KiB L1 cache
/0/400/701 memory 1MiB L2 cache
/0/400/0.1 processor Logical CPU
/0/400/0.2 processor Logical CPU
/0/1000 memory 1GiB System Memory
/0/1000/0 memory DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
/0/1000/1 memory 1GiB DIMM DDR Synchronous 533 MHz (1.9 ns)
/0/100 bridge 82915G/
/0/100/1 bridge 82915G/
/0/100/2 display 82915G/GV/910GL Integrated Graphics Controller
/0/100/2.1 display 82915G Integrated Graphics Controller
/0/100/1c bridge 82801FB/
/0/100/1c/0 eth0 network NetXtreme BCM5751 Gigabit Ethernet PCI Express
/0/100/1d bus 82801FB/
/0/100/1d.1 bus 82801FB/
/0/100/1d.2 bus 82801FB/
/0/100/1d.3 bus 82801FB/
/0/100/1d.7 bus 82801FB/
/0/100/1e bridge 82801 PCI Bridge
/0/100/1e.2 multimedia 82801FB/
/0/100/1f bridge 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
/0/100/1f.1 scsi0 storage 82801FB/
/0/100/1f.1/0.0.0 /dev/cdrom disk RW/DVD GCC-4243N
/0/100/1f.2 scsi2 storage 82801FB/FW (ICH6/ICH6W) SATA Controller
/0/100/1f.2/0.0.0 /dev/sda disk 80GB ST380815AS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 71GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 2998MiB Extended partition
/0/100/
/0/100/1f.3 bus 82801FB/
/1 wlan0 network Wireless interface
Linux werner-
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.009419] SMP alternatives: switching to UP code
[ 0.218205] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.020464] HEST: Table is not found!
[ 1.020924] usbcore: registered new interface driver usbfs
[ 1.020940] usbcore: registered new interface driver hub
[ 1.020972] usbcore: registered new device driver usb
[ 1.024025] Switching to clocksource tsc
[ 1.072180] pnp: PnP ACPI: found 11 devices
[ 1.280220] ERST: Table is not found!
[ 1.484269] hub 1-0:1.0: USB hub found
[ 1.484674] hub 2-0:1.0: USB hub found
[ 1.484989] hub 3-0:1.0: USB hub found
[ 1.485299] hub 4-0:1.0: USB hub found
[ 1.485600] hub 5-0:1.0: USB hub found
[ 1.485747] PNP: No PS/2 controller found. Probing ports directly.
[ 1.540265] device-mapper: multipath: version 1.1.1 loaded
[ 1.540269] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.550078] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.896589] isapnp: No Plug & Play device found
[ 2.020019] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 2.532012] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.711010] hub 3-2:1.0: USB hub found
[ 2.956015] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 3.380011] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3.685071] usb 3-2.1: new full speed USB device using uhci_hcd and address 3
[ 5.986415] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:12:3f:a5:b6:22
[ 5.986422] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 5.986426] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.986430] tg3 0000:02:00.0: eth0: dma_rwctrl[
[ 5.988074] usbcore: registered new interface driver hiddev
[ 6.003744] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/
[ 6.004587] generic-usb 0003:045E:
[ 6.008142] input: Dell Dell USB Keyboard Hub as /devices/
[ 6.008615] generic-usb 0003:413C:
[ 6.016358] input: Dell Dell USB Keyboard Hub as /devices/
[ 6.016469] generic-usb 0003:413C:
[ 6.016500] usbcore: registered new interface driver usbhid
[ 6.016503] usbhid: USB HID core driver
[ 14.627785] lp: driver loaded but no devices found
[ 14.772099] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.772101] intel_rng: don't want to disable this in firmware setup, and if
[ 15.069544] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0512
[ 15.069577] usbcore: registered new interface driver usblp
[ 15.623656] Registered led device: rt2800usb-
[ 15.623679] Registered led device: rt2800usb-
[ 15.623705] Registered led device: rt2800usb-
[ 15.628102] usbcore: registered new interface driver rt2800usb
[ 15.629088] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.643008] rtusb init --->
[ 15.643876] usbcore: registered new interface driver rt2870
[ 16.177378] ADDRCONF(
[ 16.600371] ADDRCONF(
[ 17.075469] Console: switching to colour frame buffer device 128x48
[ 19.376334] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 53.663310] wlan0: authenticate with 00:1e:e5:77:43:c0 (try 1)
[ 53.665060] wlan0: authenticated
[ 53.665798] wlan0: associate with 00:1e:e5:77:43:c0 (try 1)
[ 53.669060] wlan0: RX AssocResp from 00:1e:e5:77:43:c0 (capab=0x401 status=0 aid=2)
[ 53.669064] wlan0: associated
[ 53.689369] ADDRCONF(
[ 64.208029] wlan0: no IPv6 routers present
[ 102.929542] wlan0: deauthenticated from 00:1e:e5:77:43:c0 (Reason: 7)
[ 106.133544] wlan0: authenticate with 00:1e:e5:77:43:c0 (try 1)
[ 106.135158] wlan0: authenticated
[ 106.135183] wlan0: associate with 00:1e:e5:77:43:c0 (try 1)
[ 106.138662] wlan0: RX AssocResp from 00:1e:e5:77:43:c0 (capab=0x401 status=0 aid=2)
[ 106.138667] wlan0: associated
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:"linksys"
Bit Rate=54 Mb/s Tx-Power=7 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=47 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist twl4030_wdt
options iwlagn 11n_disable=1
> hal.1: read hal dataprocess 1713: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
25: PCI 200.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.M_7vcgzSjL6
Parent ID: z8Q3.hdHR1LU2D6A
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Dell Optiplex GX280"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1677 "NetXtreme BCM5751 Gigabit Ethernet PCI Express"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0179 "Optiplex GX280"
Revision: 0x01
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xdfcf0000-
IRQ: 16 (5599 events)
HW Address: 00:12:3f:a5:b6:22
Link detected: no
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
43: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: MtLc.XnRr0TlXYIE
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/
SysFS BusID: 1-6:1.0
Hardware Class: network
Model: "Cisco-Linksys LLC Dual-Band Wireless-N USB Network Adapter"
Hotplug: USB
Vendor: usb 0x1737 "Cisco-Linksys LLC"
Device: usb 0x0071 "Dual-Band Wireless-N USB Network Adapter"
Revision: "1.01"
Driver: "rt2800usb"
Driver Modules: "rt2800usb"
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 00:1e:e5:dc:4e:20
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 44 46 48 149 151 153 157 159 161 165
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.22 5.23 5.24 5.745 5.755 5.765 5.785 5.795 5.805 5.825
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v1737p0071
Driver Info #0:
Driver Status: rt2800usb is active
Driver Activation Cmd: "modprobe rt2800usb"
Driver Info #1:
Driver Status: rt2870sta is active
Driver Activation Cmd: "modprobe rt2870sta"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #38 (Hub)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
binfmt_misc 6599 1
rt2870sta 405890 0
snd_intel8x0 25632 2
arc4 1165 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,
i915 291004 3
rt2800usb 8367 0
snd_seq_midi 4588 0
rt2800lib 28897 1 rt2800usb
snd_rawmidi 17783 1 snd_seq_midi
rt2x00usb 9779 2 rt2800usb,rt2800lib
rt2x00lib 27275 2 rt2800lib,rt2x00usb
led_class 2633 1 rt2x00lib
snd_seq_midi_event 6047 1 snd_seq_midi
drm_kms_helper 30200 1 i915
mac80211 231541 2 rt2x00usb,rt2x00lib
snd_seq 47174 2 snd_seq_
snd_timer 19067 2 snd_pcm,snd_seq
drm 168054 4 i915,drm_kms_helper
snd_seq_device 5744 3 snd_seq_
ppdev 5556 0
cfg80211 144470 2 rt2x00lib,mac80211
usblp 10651 0
dcdbas 5402 0
parport_pc 26058 1
intel_agp 26360 2 i915
snd 49006 11 snd_intel8x0,
joydev 8735 0
i2c_algo_bit 5168 1 i915
crc_ccitt 1351 2 rt2870sta,rt2800usb
soundcore 880 1 snd
video 18712 1 i915
psmouse 59033 0
serio_raw 4022 0
snd_page_alloc 7120 2 snd_intel8x0,
agpgart 32011 2 drm,intel_agp
output 1883 1 video
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
tg3 123310 0
werner@
|
Revision history for this message
|
#7 |
The following Terminal output shows the issue that your wireless adapter is having:
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v1737p0071
Driver Info #0:
Driver Status: rt2800usb is active
Driver Activation Cmd: "modprobe rt2800usb"
Driver Info #1:
Driver Status: rt2870sta is active
Driver Activation Cmd: "modprobe rt2870sta"
Your Linux kernel has loaded too many wireless "drivers" (kernel modules) at the same time for your wireless adapter, causing a conflict between the two drivers.
You need to blacklist the rt2800usb driver.
Copy-paste the following command into the Terminal:
gksudo gedit /etc/modprobe.
Using the gedit editor, ADD the following 3 lines at the END of the blacklist.conf file:
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
SAVE the change to the file.
This is suggested in the Troubleshooting section of the following document:
http://
It is also suggested here:
|
Revision history for this message
|
#8 |
Thanks Mark Rijckenberg, that solved my question.
