no usb
I think USB modules are loading ok at startup:
[ 0.501238] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.501327] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.501331] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.501421] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.501528] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.501584] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.501616] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 0.520078] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.520226] usb usb1: configuration #1 chosen from 1 choice
[ 0.520311] hub 1-0:1.0: USB hub found
[ 0.520367] hub 1-0:1.0: 8 ports detected
[ 0.520491] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.520963] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.521017] alloc irq_desc for 20 on node 0
[ 0.521019] alloc kstat_irqs on node 0
[ 0.521028] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.521102] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.521105] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.521198] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.521289] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
[ 0.582099] usb usb2: configuration #1 chosen from 1 choice
[ 0.582179] hub 2-0:1.0: USB hub found
[ 0.582236] hub 2-0:1.0: 8 ports detected
[ 0.582358] uhci_hcd: USB Universal Host Controller Interface driver
However there seems to be no data flowing and no detection of usb devices being connected. Computer has stopped seeing multi slot card adapter at boot, no longer finds usb bluetooth adapter, usb sticks or drives, graphics tablet or webcam.
Connecting / disconnecting devices shows no change in dmesg
Have checked all internal and external USB connections, power is on to usb ports and mp3 player that is recharged by usb is charging, so I assume cables good and fitted correctly.
No significant dust or evidence of dead insects, loose parts etc inside case.
Reloaded defaults for bios.
Any suggestions on where to look next please.
Thanks, Denis McMahon
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- denis.m.f.mcmahon@gmail.com
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
additional info that may mean something to someone - lsusb -t, lsusb -v and usb-devices outputs
# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/8p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
# lsusb -v
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-25-generic ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:0b.0
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacter
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-25-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:0b.1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacter
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
# usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=02.06
S: Manufacturer=Linux 2.6.32-25-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 8
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.32-25-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
#
|
Revision history for this message
|
#2 |
Can you test by rebooting and logging in with no usb devices attatched. Wait a while then plug in a device,wait a few seconds then run:
dmesg
The output will help
Thanks
|
Revision history for this message
|
#3 |
I ran shutdown, powered the box off completely, removed all usb devices, powered on the box and started the system.
Logged in, opened a terminal window. Gave the dmesg command.
Plugged in a usb flash drive device, waited about 1 minute, gave the dmesg command. There was no additional output as a result of connecting the usb device.
I then connected other usb devices (bluetooth adapter, webcam, external drive, graphics tablet) and entered dmesg about 10 seconds after connecting each one.
All the dmesg outputs were identical, the last one only is shown below.
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-25-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 (Ubuntu 2.6.32-
[ 0.000000] Command line: root=UUID=
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
[ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3bff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003bff0000 (usable)
[ 0.000000] modified: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
[ 0.000000] modified: 000000003bff3000 - 000000003c000000 (ACPI data)
[ 0.000000] modified: 000000003c000000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 003be00000 page 2M
[ 0.000000] 003be00000 - 003bff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3bff0000 @ 10000-13000
[ 0.000000] RAMDISK: 377fd000 - 37feff2d
[ 0.000000] ACPI: RSDP 00000000000f7ee0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000003bff3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 000000003bff30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: DSDT 000000003bff3180 06498 (v01 NVIDIA NVDAACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000003bff0000 00040
[ 0.000000] ACPI: SSDT 000000003bff9740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 000000003bff99c0 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 000000003bff9a40 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 000000003bff9680 0007C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000001d7ff] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003bff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a2ca64] TEXT DATA BSS ==> [0001000000 - 0001a2ca64]
[ 0.000000] #3 [00377fd000 - 0037feff2d] RAMDISK ==> [00377fd000 - 0037feff2d]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001a2d000 - 0001a2d239] BRK ==> [0001a2d000 - 0001a2d239]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f3d60] f3d60
[ 0.000000] [ffffea00000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bff0
[ 0.000000] On node 0 totalpages: 245631
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3304 pages used for memmap
[ 0.000000] DMA32 zone: 238344 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 242170
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 210000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 949248k/982976k available (5420k kernel code, 452k absent, 33276k reserved, 2974k data, 872k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2210.184 MHz processor.
[ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.36 BogoMIPS (lpj=22101840)
[ 0.010133] Security Framework initialized
[ 0.010210] AppArmor: AppArmor initialized
[ 0.010366] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011185] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.011594] Mount-cache hash table entries: 256
[ 0.011812] Initializing cgroup subsys ns
[ 0.011864] Initializing cgroup subsys cpuacct
[ 0.011916] Initializing cgroup subsys memory
[ 0.011974] Initializing cgroup subsys devices
[ 0.012025] Initializing cgroup subsys freezer
[ 0.012075] Initializing cgroup subsys net_cls
[ 0.012146] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012198] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012249] CPU 0/0x0 -> Node 0
[ 0.012297] tseg: 0000000000
[ 0.012317] CPU: Physical Processor ID: 0
[ 0.012366] CPU: Processor Core ID: 0
[ 0.012416] mce: CPU supports 5 MCE banks
[ 0.012478] using C1E aware idle routine
[ 0.012527] Performance Events: AMD PMU driver.
[ 0.012616] ... version: 0
[ 0.012664] ... bit width: 48
[ 0.012713] ... generic registers: 4
[ 0.012762] ... value mask: 0000ffffffffffff
[ 0.012812] ... max period: 00007fffffffffff
[ 0.012863] ... fixed-purpose events: 0
[ 0.012912] ... event mask: 000000000000000f
[ 0.014639] ACPI: Core revision 20090903
[ 0.028196] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028261] ftrace: allocating 22538 entries in 89 pages
[ 0.030117] Setting APIC routing to flat
[ 0.030692] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.135900] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.020000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.290064] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 0.290485] Brought up 2 CPUs
[ 0.290534] Total of 2 processors activated (8840.52 BogoMIPS).
[ 0.290815] CPU0 attaching sched-domain:
[ 0.290818] domain 0: span 0-1 level MC
[ 0.290821] groups: 0 1
[ 0.290827] CPU1 attaching sched-domain:
[ 0.290829] domain 0: span 0-1 level MC
[ 0.290831] groups: 1 0
[ 0.290924] devtmpfs: initialized
[ 0.290924] regulator: core version 0.5
[ 0.290924] Time: 18:33:00 Date: 10/25/10
[ 0.290924] NET: Registered protocol family 16
[ 0.290924] Trying to unpack rootfs image as initramfs...
[ 0.290924] node 0 link 0: io port [8000, ffff]
[ 0.290924] TOM: 0000000040000000 aka 1024M
[ 0.290924] node 0 link 0: mmio [a0000, bffff]
[ 0.290924] node 0 link 0: mmio [40000000, efffffff]
[ 0.290924] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.290924] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.290924] bus: [00,04] on node 0 link 0
[ 0.290924] bus: 00 index 0 io port: [0, ffff]
[ 0.290924] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.290924] bus: 00 index 2 mmio: [40000000, f3ffffff]
[ 0.290924] bus: 00 index 3 mmio: [f4000000, fcffffffff]
[ 0.290924] ACPI: bus type pci registered
[ 0.290924] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.290924] PCI: MCFG area at f0000000 reserved in E820
[ 0.291897] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.291948] PCI: Using configuration type 1 for base access
[ 0.300152] bio: create slab <bio-0> at 0
[ 0.301130] ACPI: EC: Look up EC in DSDT
[ 0.310384] ACPI: Interpreter enabled
[ 0.310435] ACPI: (supports S0 S1 S4 S5)
[ 0.310644] ACPI: Using IOAPIC for interrupt routing
[ 0.320424] ACPI: No dock devices found.
[ 0.321634] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.321954] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322007] pci 0000:00:02.0: PME# disabled
[ 0.322089] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322141] pci 0000:00:03.0: PME# disabled
[ 0.322225] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322278] pci 0000:00:04.0: PME# disabled
[ 0.325269] pci 0000:00:05.0: reg 10 32bit mmio: [0xfc000000-
[ 0.325274] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xe0000000-
[ 0.325279] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfb000000-
[ 0.325284] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.325523] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.325528] pci 0000:00:0a.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.325551] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.325606] pci 0000:00:0a.1: PME# disabled
[ 0.325719] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-
[ 0.325745] pci 0000:00:0b.0: supports D1 D2
[ 0.325747] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.325800] pci 0000:00:0b.0: PME# disabled
[ 0.325877] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-
[ 0.325905] pci 0000:00:0b.1: supports D1 D2
[ 0.325907] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.325960] pci 0000:00:0b.1: PME# disabled
[ 0.326047] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f]
[ 0.326088] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.326092] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.326097] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.326101] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.326106] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
[ 0.326110] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-
[ 0.326156] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.326160] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.326165] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
[ 0.326169] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
[ 0.326174] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f]
[ 0.326178] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-
[ 0.326257] pci 0000:00:10.2: reg 10 io port: [0xc800-0xc8ff]
[ 0.326262] pci 0000:00:10.2: reg 14 io port: [0xc400-0xc4ff]
[ 0.326267] pci 0000:00:10.2: reg 18 32bit mmio: [0xfe02b000-
[ 0.326289] pci 0000:00:10.2: supports D1 D2
[ 0.326321] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02a000-
[ 0.326326] pci 0000:00:14.0: reg 14 io port: [0xc000-0xc007]
[ 0.326347] pci 0000:00:14.0: supports D1 D2
[ 0.326349] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.326402] pci 0000:00:14.0: PME# disabled
[ 0.326581] pci 0000:00:02.0: bridge io port: [0x8000-0x8fff]
[ 0.326583] pci 0000:00:02.0: bridge 32bit mmio: [0xfd800000-
[ 0.326587] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfd700000-
[ 0.326625] pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
[ 0.326628] pci 0000:00:03.0: bridge 32bit mmio: [0xfde00000-
[ 0.326631] pci 0000:00:03.0: bridge 64bit mmio pref: [0xfdd00000-
[ 0.326669] pci 0000:00:04.0: bridge io port: [0x9000-0x9fff]
[ 0.326672] pci 0000:00:04.0: bridge 32bit mmio: [0xfdc00000-
[ 0.326675] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfd900000-
[ 0.326713] pci 0000:00:10.0: transparent bridge
[ 0.326763] pci 0000:00:10.0: bridge io port: [0xb000-0xbfff]
[ 0.326766] pci 0000:00:10.0: bridge 32bit mmio: [0xfdb00000-
[ 0.326770] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfda00000-
[ 0.326783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327027] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.397167] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.397757] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.398343] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.398929] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.399515] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.400122] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.400712] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.401220] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.401810] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.402317] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.402905] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.403414] ACPI: PCI Interrupt Link [LACI] (IRQs *5 7 9 10 11 14 15)
[ 0.403926] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.404518] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
[ 0.405023] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.405615] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.406125] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.406634] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.407224] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.407731] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.408299] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.408719] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.409140] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.409558] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.409984] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.410381] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.410801] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.411185] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.411606] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.412097] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.412620] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.413112] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.413601] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.414089] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.414613] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.415138] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.415626] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.416127] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.416652] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.417175] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.417664] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.418101] vgaarb: device added: PCI:0000:
[ 0.418175] vgaarb: loaded
[ 0.418350] SCSI subsystem initialized
[ 0.418531] libata version 3.00 loaded.
[ 0.418613] usbcore: registered new interface driver usbfs
[ 0.418675] usbcore: registered new interface driver hub
[ 0.418757] usbcore: registered new device driver usb
[ 0.418971] ACPI: WMI: Mapper loaded
[ 0.419020] PCI: Using ACPI for IRQ routing
[ 0.419258] NetLabel: Initializing
[ 0.419307] NetLabel: domain hash size = 128
[ 0.419355] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.419422] NetLabel: unlabeled traffic allowed by default
[ 0.419518] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.419710] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.430065] Switching to clocksource hpet
[ 0.432155] AppArmor: AppArmor Filesystem Enabled
[ 0.432235] pnp: PnP ACPI init
[ 0.432310] ACPI: bus type pnp registered
[ 0.439218] pnp: PnP ACPI: found 16 devices
[ 0.439268] ACPI: ACPI bus type pnp unregistered
[ 0.439333] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.439385] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.439438] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.439490] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.439543] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.439595] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.439648] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.439701] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.439806] system 00:01: iomem range 0xfec80000-
[ 0.439859] system 00:01: iomem range 0xfefe0000-
[ 0.439912] system 00:01: iomem range 0x3c000000-
[ 0.439969] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.440031] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.440084] system 00:02: ioport range 0x290-0x299 has been reserved
[ 0.440136] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.440194] system 00:0e: iomem range 0xf0000000-
[ 0.440249] system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
[ 0.440302] system 00:0f: iomem range 0xfeff0000-
[ 0.440355] system 00:0f: iomem range 0x3bff0000-
[ 0.440417] system 00:0f: iomem range 0xffff0000-
[ 0.440471] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.440523] system 00:0f: iomem range 0x100000-0x3bfeffff could not be reserved
[ 0.440585] system 00:0f: iomem range 0xfec00000-
[ 0.440647] system 00:0f: iomem range 0xfee00000-
[ 0.440701] system 00:0f: iomem range 0xfefff000-
[ 0.440754] system 00:0f: iomem range 0xfff80000-
[ 0.440807] system 00:0f: iomem range 0xfff90000-
[ 0.440861] system 00:0f: iomem range 0xfffed000-
[ 0.445680] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.445732] pci 0000:00:02.0: IO window: 0x8000-0x8fff
[ 0.445784] pci 0000:00:02.0: MEM window: 0xfd800000-
[ 0.445837] pci 0000:00:02.0: PREFETCH window: 0x000000fd70000
[ 0.445900] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.445952] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 0.446003] pci 0000:00:03.0: MEM window: 0xfde00000-
[ 0.446055] pci 0000:00:03.0: PREFETCH window: 0x000000fdd0000
[ 0.446117] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.446168] pci 0000:00:04.0: IO window: 0x9000-0x9fff
[ 0.446219] pci 0000:00:04.0: MEM window: 0xfdc00000-
[ 0.446271] pci 0000:00:04.0: PREFETCH window: 0x000000fd90000
[ 0.446334] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.446385] pci 0000:00:10.0: IO window: 0xb000-0xbfff
[ 0.446437] pci 0000:00:10.0: MEM window: 0xfdb00000-
[ 0.446489] pci 0000:00:10.0: PREFETCH window: 0xfda00000-
[ 0.446551] pci 0000:00:02.0: setting latency timer to 64
[ 0.446556] pci 0000:00:03.0: setting latency timer to 64
[ 0.446561] pci 0000:00:04.0: setting latency timer to 64
[ 0.446566] pci 0000:00:10.0: setting latency timer to 64
[ 0.446572] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.446574] pci_bus 0000:00: resource 1 mem: [0x000000-
[ 0.446577] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff]
[ 0.446580] pci_bus 0000:01: resource 1 mem: [0xfd800000-
[ 0.446582] pci_bus 0000:01: resource 2 pref mem [0xfd700000-
[ 0.446585] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.446587] pci_bus 0000:02: resource 1 mem: [0xfde00000-
[ 0.446589] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-
[ 0.446592] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff]
[ 0.446594] pci_bus 0000:03: resource 1 mem: [0xfdc00000-
[ 0.446596] pci_bus 0000:03: resource 2 pref mem [0xfd900000-
[ 0.446599] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.446601] pci_bus 0000:04: resource 1 mem: [0xfdb00000-
[ 0.446604] pci_bus 0000:04: resource 2 pref mem [0xfda00000-
[ 0.446606] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.446608] pci_bus 0000:04: resource 4 mem: [0x000000-
[ 0.446655] NET: Registered protocol family 2
[ 0.446833] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.447564] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.449320] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.450178] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.450232] TCP reno registered
[ 0.450395] NET: Registered protocol family 1
[ 0.450482] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.450535] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.450621] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.450692] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.450766] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.450821] pci 0000:00:05.0: Boot video device
[ 0.470103] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.470159] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.470262] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.470319] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.470425] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.470479] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.471913] Scanning for low memory corruption every 60 seconds
[ 0.472112] audit: initializing netlink socket (disabled)
[ 0.472180] type=2000 audit(128803157
[ 0.480885] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.482449] VFS: Disk quotas dquot_6.5.2
[ 0.482559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.483298] fuse init (API version 7.13)
[ 0.483428] msgmni has been set to 1854
[ 0.483748] alg: No test for stdrng (krng)
[ 0.483854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.483915] io scheduler noop registered
[ 0.483964] io scheduler anticipatory registered
[ 0.484014] io scheduler deadline registered
[ 0.484102] io scheduler cfq registered (default)
[ 0.484343] alloc irq_desc for 24 on node 0
[ 0.484345] alloc kstat_irqs on node 0
[ 0.484357] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.484364] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.484467] alloc irq_desc for 25 on node 0
[ 0.484469] alloc kstat_irqs on node 0
[ 0.484473] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.484477] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.484571] alloc irq_desc for 26 on node 0
[ 0.484573] alloc kstat_irqs on node 0
[ 0.484577] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.484581] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.484642] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.484720] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.484897] input: Power Button as /devices/
[ 0.484962] ACPI: Power Button [PWRB]
[ 0.485075] input: Power Button as /devices/
[ 0.485136] ACPI: Power Button [PWRF]
[ 0.485241] fan PNP0C0B:00: registered as cooling_device0
[ 0.485296] ACPI: Fan [FAN] (on)
[ 0.485788] processor LNXCPU:00: registered as cooling_device1
[ 0.485873] processor LNXCPU:01: registered as cooling_device2
[ 0.490921] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.490979] ACPI: Thermal Zone [THRM] (40 C)
[ 0.495535] Linux agpgart interface v0.103
[ 0.495629] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.495795] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.495951] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.496280] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.497473] brd: module loaded
[ 0.498003] loop: module loaded
[ 0.498153] input: Macintosh mouse button emulation as /devices/
[ 0.498558] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 0.499064] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.499121] alloc irq_desc for 23 on node 0
[ 0.499123] alloc kstat_irqs on node 0
[ 0.499136] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.499227] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 0.499235] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 0.499650] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.499701] alloc irq_desc for 22 on node 0
[ 0.499703] alloc kstat_irqs on node 0
[ 0.499711] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.499795] pata_acpi 0000:00:0f.0: setting latency timer to 64
[ 0.499802] pata_acpi 0000:00:0f.0: PCI INT A disabled
[ 0.500290] Fixed MDIO Bus: probed
[ 0.500373] PPP generic driver version 2.4.2
[ 0.500466] Freeing initrd memory: 8139k freed
[ 0.500484] tun: Universal TUN/TAP device driver, 1.6
[ 0.500486] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.500596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.501061] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.501116] alloc irq_desc for 21 on node 0
[ 0.501118] alloc kstat_irqs on node 0
[ 0.501129] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.501219] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.501223] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.501311] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.501417] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.501474] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.501510] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 0.520029] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.520177] usb usb1: configuration #1 chosen from 1 choice
[ 0.520262] hub 1-0:1.0: USB hub found
[ 0.520318] hub 1-0:1.0: 8 ports detected
[ 0.520443] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.520913] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.520966] alloc irq_desc for 20 on node 0
[ 0.520968] alloc kstat_irqs on node 0
[ 0.520977] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.521050] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.521052] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.521145] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.521236] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
[ 0.582094] usb usb2: configuration #1 chosen from 1 choice
[ 0.582175] hub 2-0:1.0: USB hub found
[ 0.582232] hub 2-0:1.0: 8 ports detected
[ 0.582394] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.582566] PNP: PS/2 Controller [PNP0303:
[ 0.583067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.583123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.583260] mice: PS/2 mouse device common for all mice
[ 0.583417] rtc_cmos 00:05: RTC can wake from S4
[ 0.583513] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.583600] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.583803] device-mapper: uevent: version 1.0.3
[ 0.584019] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.584184] device-mapper: multipath: version 1.1.0 loaded
[ 0.584236] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.584519] cpuidle: using governor ladder
[ 0.584569] cpuidle: using governor menu
[ 0.585005] TCP cubic registered
[ 0.585209] NET: Registered protocol family 10
[ 0.585763] lo: Disabled Privacy Extensions
[ 0.586119] NET: Registered protocol family 17
[ 0.586213] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 0.586339] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
[ 0.586391] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
[ 0.586442] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
[ 0.586493] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.586691] PM: Resume from disk failed.
[ 0.586707] registered taskstats version 1
[ 0.587093] Magic number: 14:841:595
[ 0.587253] rtc_cmos 00:05: setting system clock to 2010-10-25 18:33:00 UTC (1288031580)
[ 0.587316] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.587367] EDD information not available.
[ 0.587482] Freeing unused kernel memory: 872k freed
[ 0.588067] Write protecting the kernel read-only data: 7692k
[ 0.598696] input: AT Translated Set 2 keyboard as /devices/
[ 0.609827] udev: starting version 151
[ 0.724968] sata_nv 0000:00:0e.0: version 3.5
[ 0.724993] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.725061] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.725188] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 0.747556] scsi0 : sata_nv
[ 0.752988] scsi1 : sata_nv
[ 0.753297] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 0.753351] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 0.762056] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.762120] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 0.762241] scsi2 : pata_amd
[ 0.762401] scsi3 : pata_amd
[ 0.763188] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 0.763241] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 0.763523] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.763916] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.763971] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.764035] forcedeth 0000:00:14.0: setting latency timer to 64
[ 0.764097] nv_probe: set workaround bit for reversed mac addr
[ 0.776394] FDC 0 is a post-1991 82077
[ 0.940313] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S202H, SB00, max UDMA/66
[ 0.940387] ata3: nv_mode_filter: 0x1f39f&
[ 0.980272] ata3.00: configured for UDMA/66
[ 1.240028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.260361] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 1.260414] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.290856] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1c:25:38:cf:7d
[ 1.290920] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 1.291075] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 1.291138] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 1.291247] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 1.291398] scsi4 : sata_nv
[ 1.291540] scsi5 : sata_nv
[ 1.291808] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 1.291862] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 1.300412] ata1.00: configured for UDMA/133
[ 1.300579] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 1.300829] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.301004] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.301457] sd 0:0:0:0: [sda] Write Protect is off
[ 1.301508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.301534] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.301744] sda: sda1 sda2 < sda5 >
[ 1.339026] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.570449] kjournald starting. Commit interval 5 seconds
[ 1.570461] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.620030] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.630020] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.630765] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202H SB00 PQ: 0 ANSI: 5
[ 1.634268] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.634330] Uniform CD-ROM driver Revision: 3.20
[ 1.634494] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.634554] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.130030] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.272652] Adding 2771172k swap on /dev/sda5. Priority:-1 extents:1 across:2771172k
[ 4.775658] EXT3 FS on sda1, internal journal
[ 4.837250] udev: starting version 151
[ 7.137494] type=1505 audit(128803158
[ 7.137756] type=1505 audit(128803158
[ 7.137904] type=1505 audit(128803158
[ 7.681588] lp: driver loaded but no devices found
[ 8.476272] parport_pc 00:0b: reported by Plug and Play ACPI
[ 8.476329] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.477743] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 8.477835] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 8.505539] vga16fb: initializing
[ 8.505547] vga16fb: mapped to 0xffff8800000a0000
[ 8.505628] fb0: VGA16 VGA frame buffer device
[ 8.550215] lp0: using parport0 (interrupt-driven).
[ 8.721026] ppdev: user-space parallel port driver
[ 8.930223] type=1505 audit(128803158
[ 9.171885] input: ImExPS/2 Generic Explorer Mouse as /devices/
[ 9.452771] EDAC MC: Ver: 2.1.0 Oct 16 2010
[ 9.453699] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.512807] nvidia: module license 'NVIDIA' taints kernel.
[ 10.512813] Disabling lock debugging due to kernel taint
[ 11.143240] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2010
[ 11.155416] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 11.155431] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 11.155433] Either enable ECC checking or force module loading by setting 'ecc_enable_
[ 11.155434] (Note that use of the override may cause unknown side effects.)
[ 11.155463] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 11.156412] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 11.156418] alloc irq_desc for 16 on node 0
[ 11.156421] alloc kstat_irqs on node 0
[ 11.156434] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 11.156441] nvidia 0000:00:05.0: setting latency timer to 64
[ 11.156447] vgaarb: device changed decodes: PCI:0000:
[ 11.156797] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010
[ 11.847515] Console: switching to colour frame buffer device 80x30
[ 13.535874] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 13.535883] Intel ICH 0000:00:10.2: PCI INT C -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 13.535915] Intel ICH 0000:00:10.2: setting latency timer to 64
[ 13.870043] intel8x0_
[ 13.870047] intel8x0: clocking to 46867
[ 14.378942] type=1505 audit(128803159
[ 14.381099] type=1505 audit(128803159
[ 14.381357] type=1505 audit(128803159
[ 14.381515] type=1505 audit(128803159
[ 15.662811] type=1505 audit(128803159
[ 15.666260] type=1505 audit(128803159
[ 15.668421] type=1505 audit(128803159
[ 16.090702] type=1505 audit(128803159
[ 16.091038] type=1505 audit(128803159
[ 16.125222] type=1505 audit(128803159
[ 20.182583] RPC: Registered udp transport module.
[ 20.182587] RPC: Registered tcp transport module.
[ 20.182589] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.309062] svc: failed to register lockdv1 RPC service (errno 97).
[ 22.115517] __ratelimit: 9 callbacks suppressed
[ 22.115521] type=1505 audit(128803160
[ 23.060016] eth0: no IPv6 routers present
[ 94.510035] Clocksource tsc unstable (delta = -197886241 ns)
#
|
Revision history for this message
|
#4 |
Does the system have a make / model?
|
Revision history for this message
|
#5 |
Motherboard is a "WinFast 6150M2MA", I bought the machine assembled from Novatech in the UK about 2 1/2 years ago. It has a Novatech badge, they called it an "Icon". The following is reported by system profiler:
Computer
********
Summary
-------
-Computer-
Processor : 2x AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
Memory : 958MB (578MB used)
Operating System : Ubuntu 10.04.1 LTS
User Name : denis (Denis McMahon)
Date/Time : Mon 25 Oct 2010 20:15:18 BST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : NFORCE - Intel ICH
-Input Devices-
Power Button
Power Button
Macintosh mouse button emulation
AT Translated Set 2 keyboard
ImExPS/2 Generic Explorer Mouse
-Printers (CUPS)-
colour-highq
Colour-Standard
Mono-Draft : <i>Default</i>
Mono-Hi-Q
Mono-Standard
-SCSI Disks-
ATA Hitachi HDS72161
TSSTcorp CDDVDW SH-S202H
Operating System
----------------
-Version-
Kernel : Linux 2.6.32-25-generic (x86_64)
Compiled : #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010
C Library : GNU C Library version 2.11.1 (stable)
Default C Compiler : GNU C Compiler version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
Distribution : Ubuntu 10.04.1 LTS
-Current Session-
Computer Name : denis-desktop
User Name : denis (Denis McMahon)
Home Directory : /home/denis
Desktop Environment : GNOME 2.30.2
-Misc-
Uptime : 42 minutes
Load Average : 0.65, 0.80, 0.77
Kernel Modules
--------------
-Loaded Modules-
binfmt_misc
nfs
lockd : NFS file locking service version 0.5.
nfs_acl
auth_rpcgss
autofs4
sunrpc
snd_intel8x0 : Intel 82801AA,
snd_ac97_codec : Universal interface for Audio Codec '97
ac97_bus
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
snd_pcm : Midlevel PCM code for ALSA.
snd_seq_dummy : ALSA sequencer MIDI-through client
snd_seq_oss : OSS-compatible sequencer module
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_seq : Advanced Linux Sound Architecture sequencer.
fbcon
snd_timer : ALSA timer interface
tileblit : Tile Blitting Operation
snd_seq_device : ALSA sequencer device management
font : Console Fonts
bitblit : Bit Blitting Operation
softcursor : Generic software cursor
snd : Advanced Linux Sound Architecture driver for soundcards.
nvidia
k8temp : AMD K8 core temperature monitor
edac_core : Core library routines for EDAC reporting
ppdev
psmouse : PS/2 mouse driver
soundcore : Core sound module
vga16fb : Legacy VGA framebuffer device driver
serio_raw : Raw serio driver
vgastate : VGA State Save/Restore
i2c_nforce2 : nForce2/3/4/5xx SMBus driver
edac_mce_amd : AMD MCE decoder
snd_page_alloc : Memory allocator for ALSA system.
parport_pc : PC-style parallel port driver
lp
parport
floppy
forcedeth : Reverse Engineered nForce ethernet driver
pata_amd : low-level driver for AMD and Nvidia PATA IDE
sata_nv : low-level driver for NVIDIA nForce SATA controller
Boots
-----
-Boots-
Mon Oct 25 19:33 : 2.6.32-25-generi|-
Mon Oct 25 17:35 : 2.6.32-25-generi|-
Mon Oct 25 17:05 : 2.6.32-25-generi|-
Mon Oct 25 16:59 : 2.6.32-25-generi|-
Mon Oct 25 16:56 : 2.6.32-25-generi|-
Mon Oct 25 16:13 : 2.6.32-25-generi|-
Mon Oct 25 10:00 : 2.6.32-25-generi|-
Sun Oct 24 14:39 : 2.6.32-25-generi|-
Sat Oct 23 23:28 : 2.6.32-25-generi|-
Fri Oct 22 16:16 : 2.6.32-25-generi|-
Thu Oct 21 12:25 : 2.6.32-25-generi|-
Thu Oct 21 04:57 : 2.6.32-25-generi|-
Wed Oct 20 23:10 : 2.6.32-25-generi|-
Wed Oct 20 17:33 : 2.6.32-25-generi|-
Wed Oct 20 09:19 : 2.6.32-25-generi|-
Wed Oct 20 07:56 : 2.6.32-25-generi|-
Tue Oct 19 16:09 : 2.6.32-25-generi|-
Tue Oct 19 14:34 : 2.6.32-25-generi|-
Tue Oct 19 01:36 : 2.6.32-25-generi|-
Mon Oct 18 13:32 : 2.6.32-25-generi|-
Sun Oct 17 15:48 : 2.6.32-25-generi|-
Sat Oct 16 17:19 : 2.6.32-25-generi|-
Fri Oct 15 12:48 : 2.6.32-25-generi|-
Thu Oct 14 07:49 : 2.6.32-25-generi|-
Wed Oct 13 13:08 : 2.6.32-25-generi|-
Tue Oct 12 15:06 : 2.6.32-25-generi|-
Tue Oct 12 09:51 : 2.6.32-25-generi|-
Mon Oct 11 12:47 : 2.6.32-25-generi|-
Sun Oct 10 18:15 : 2.6.32-25-generi|-
Sat Oct 9 16:43 : 2.6.32-25-generi|-
Fri Oct 8 18:00 : 2.6.32-25-generi|-
Fri Oct 8 08:47 : 2.6.32-25-generi|-
Thu Oct 7 13:28 : 2.6.32-25-generi|-
Wed Oct 6 15:29 : 2.6.32-25-generi|-
Wed Oct 6 11:49 : 2.6.32-25-generi|-
Tue Oct 5 14:22 : 2.6.32-25-generi|-
Mon Oct 4 15:50 : 2.6.32-25-generi|-
Sun Oct 3 22:50 : 2.6.32-25-generi|-
Sun Oct 3 21:41 : 2.6.32-25-generi|-
Sun Oct 3 22:32 : 2.6.32-25-generi|-
Sun Oct 3 09:08 : 2.6.32-25-generi|-
Sat Oct 2 11:44 : 2.6.32-25-generi|-
Languages
---------
-Available Languages-
en_AG : English language locale for Antigua and Barbuda
en_AU.utf8 : English locale for Australia
en_BW.utf8 : English locale for Botswana
en_CA.utf8 : English locale for Canada
en_DK.utf8 : English locale for Denmark
en_GB.utf8 : English locale for Britain
en_HK.utf8 : English locale for Hong Kong
en_IE.utf8 : English locale for Ireland
en_IN : English language locale for India
en_NG : English locale for Nigeria
en_NZ.utf8 : English locale for New Zealand
en_PH.utf8 : English language locale for Philippines
en_SG.utf8 : English language locale for Singapore
en_US.utf8 : English locale for the USA
en_ZA.utf8 : English locale for South Africa
Filesystems
-----------
-Mounted File Systems-
/dev/sda1 / 68.59 % (45.3 GiB of 144.1 GiB)
none /dev 0.05 % (463.3 MiB of 463.5 MiB)
none /dev/shm 0.00 % (467.9 MiB of 467.9 MiB)
none /var/run 0.05 % (467.7 MiB of 467.9 MiB)
none /var/lock 0.00 % (467.9 MiB of 467.9 MiB)
none /lib/init/rw 0.00 % (467.9 MiB of 467.9 MiB)
none /var/lib/
192.168.1.10: /media/sined 22.45 % (10.4 GiB of 13.5 GiB)
192.168.
Display
-------
-Display-
Resolution : 1024x768 pixels
Vendor : The X.Org Foundation
Version : 1.7.6
-Monitors-
Monitor 0 : 1024x768 pixels
-Extensions-
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
NV-CONTROL
NV-GLX
RANDR
RECORD
RENDER
SECURITY
SGI-GLX
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-
XINERAMA
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
XVideo-
-OpenGL-
Vendor : Unknown
Renderer : Unknown
Version : Unknown
Direct Rendering : No
Environment Variables
-------
-Environment Variables-
SSH_AGENT_PID : 1698
GPG_AGENT_INFO : /tmp/gpg-
SHELL : /bin/bash
XDG_SESSION_COOKIE : b20a8ceb35d7651
GNOME_KEYRING_
GTK_MODULES : canberra-gtk-module
USER : denis
SSH_AUTH_SOCK : /tmp/keyring-
USERNAME : denis
DEFAULTS_PATH : /usr/share/
XDG_CONFIG_DIRS : /etc/xdg/
PATH : /usr/local/
DESKTOP_SESSION : gnome
PWD : /home/denis
GDM_KEYBOARD_LAYOUT : gb
LANG : en_GB.utf8
GNOME_KEYRING_PID : 1638
GDM_LANG : en_GB.utf8
MANDATORY_PATH : /usr/share/
GDMSESSION : gnome
SPEECHD_PORT : 7560
SHLVL : 1
HOME : /home/denis
LOGNAME : denis
DBUS_SESSION_
XDG_DATA_DIRS : /usr/share/
DISPLAY : :0.0
XAUTHORITY : /var/run/
_ : /usr/bin/
GNOME_DESKTOP_
SESSION_MANAGER : local/denis-
ORBIT_SOCKETDIR : /tmp/orbit-denis
Devices
*******
Processor
---------
-Processors-
AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ : 1000.00MHz
AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ : 1000.00MHz
Memory
------
-Memory-
Total Memory : 958260 kB
Free Memory : 15308 kB
Buffers : 22428 kB
Cached : 364032 kB
Cached Swap : 248 kB
Active : 363528 kB
Inactive : 465588 kB
Active(anon) : 217116 kB
Inactive(anon) : 229728 kB
Active(file) : 146412 kB
Inactive(file) : 235860 kB
Unevictable : 4 kB
Mlocked : 4 kB
Virtual Memory : 2771172 kB
Free Virtual Memory : 2768144 kB
Dirty : 44 kB
Writeback : 0 kB
AnonPages : 442424 kB
Mapped : 102688 kB
Shmem : 4184 kB
Slab : 39084 kB
SReclaimable : 21380 kB
SUnreclaim : 17704 kB
KernelStack : 2368 kB
PageTables : 20932 kB
NFS_Unstable : 0 kB
Bounce : 0 kB
WritebackTmp : 0 kB
CommitLimit : 3250300 kB
Committed_AS : 1319604 kB
VmallocTotal : 34359738367 kB
VmallocUsed : 112924 kB
VmallocChunk : 34359614460 kB
HardwareCorrupted : 0 kB
HugePages_Total : 0
HugePages_Free : 0
HugePages_Rsvd : 0
HugePages_Surp : 0
Hugepagesize : 2048 kB
DirectMap4k : 49088 kB
DirectMap2M : 933888 kB
PCI Devices
-----------
-PCI Devices-
RAM memory : nVidia Corporation C51 Host Bridge (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 0 (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 1 (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 5 (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 4 (rev a2)
RAM memory : nVidia Corporation C51 Host Bridge (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 3 (rev a2)
RAM memory : nVidia Corporation C51 Memory Controller 2 (rev a2)
PCI bridge : nVidia Corporation C51 PCI Express Bridge (rev a1)
PCI bridge : nVidia Corporation C51 PCI Express Bridge (rev a1)
PCI bridge : nVidia Corporation C51 PCI Express Bridge (rev a1)
VGA compatible controller : nVidia Corporation C51PV [GeForce 6150] (rev a2)
RAM memory : nVidia Corporation MCP51 Host Bridge (rev a2)
ISA bridge : nVidia Corporation MCP51 LPC Bridge (rev a2)
SMBus : nVidia Corporation MCP51 SMBus (rev a2)
RAM memory : nVidia Corporation MCP51 Memory Controller 0 (rev a2)
USB Controller : nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 10)
USB Controller : nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 20)
IDE interface : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
IDE interface : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
IDE interface : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
PCI bridge : nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01)
Multimedia audio controller : nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
Bridge : nVidia Corporation MCP51 Ethernet Controller (rev a1)
Host bridge : Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Host bridge : Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Host bridge : Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Host bridge : Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
USB Devices
-----------
Printers
--------
-Printers (CUPS)-
colour-highq
Colour-Standard
Mono-Draft : <i>Default</i>
Mono-Hi-Q
Mono-Standard
Battery
-------
-No batteries-
No batteries found on this system
Sensors
-------
-ACPI Thermal Zone-
THRM : 40°C
Input Devices
-------------
-Input Devices-
Power Button
Power Button
Macintosh mouse button emulation
AT Translated Set 2 keyboard
ImExPS/2 Generic Explorer Mouse
Storage
-------
-SCSI Disks-
ATA Hitachi HDS72161
TSSTcorp CDDVDW SH-S202H
DMI
---
-BIOS-
Date : 01/19/2008
Vendor : Phoenix Technologies, LTD (www.phoenix.com)
Version : 686W1D28
-Board-
Name : 6150M2MA
Vendor : WinFast
Resources
---------
-I/O Ports-
<tt>0000-001f </tt> : dma1
<tt>0020-0021 </tt> : pic1
<tt>0040-0043 </tt> : timer0
<tt>0050-0053 </tt> : timer1
<tt>0060-0060 </tt> : keyboard
<tt>0064-0064 </tt> : keyboard
<tt>0070-0073 </tt> : rtc0
<tt>0080-008f </tt> : dma page reg
<tt>00a0-00a1 </tt> : pic2
<tt>00c0-00df </tt> : dma2
<tt>00f0-00ff </tt> : fpu
<tt>0170-0177 </tt> : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
<tt> 0170-0177 </tt> : low-level driver for AMD and Nvidia PATA IDE
<tt>01f0-01f7 </tt> : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
<tt> 01f0-01f7 </tt> : low-level driver for AMD and Nvidia PATA IDE
<tt>0290-0299 </tt> : pnp 00:02
<tt> 0290-0297 </tt> : pnp 00:02
<tt>02f8-02ff </tt> : serial
<tt>0376-0376 </tt> : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
<tt> 0376-0376 </tt> : low-level driver for AMD and Nvidia PATA IDE
<tt>0378-037a </tt> : parport0
<tt>03c0-03df </tt> : vga+
<tt>03f2-03f2 </tt> : floppy
<tt>03f4-03f5 </tt> : floppy
<tt>03f6-03f6 </tt> : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
<tt> 03f6-03f6 </tt> : low-level driver for AMD and Nvidia PATA IDE
<tt>03f7-03f7 </tt> : floppy
<tt>03f8-03ff </tt> : serial
<tt>04d0-04d1 </tt> : pnp 00:02
<tt>0800-0805 </tt> : pnp 00:02
<tt>0960-0967 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0960-0967 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0970-0977 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0970-0977 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>09e0-09e7 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 09e0-09e7 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>09f0-09f7 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 09f0-09f7 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0b60-0b63 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0b60-0b63 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0b70-0b73 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0b70-0b73 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0be0-0be3 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0be0-0be3 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0bf0-0bf3 </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> 0bf0-0bf3 </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>0cf8-0cff </tt> : PCI conf1
<tt>1000-107f </tt> : pnp 00:01
<tt> 1000-1003 </tt> : ACPI PM1a_EVT_BLK
<tt> 1004-1005 </tt> : ACPI PM1a_CNT_BLK
<tt> 1008-100b </tt> : ACPI PM_TMR
<tt> 101c-101c </tt> : ACPI PM2_CNT_BLK
<tt> 1020-1027 </tt> : ACPI GPE0_BLK
<tt>1080-10ff </tt> : pnp 00:01
<tt>1400-147f </tt> : pnp 00:01
<tt>1480-14ff </tt> : pnp 00:01
<tt> 14a0-14af </tt> : ACPI GPE1_BLK
<tt>1800-187f </tt> : pnp 00:01
<tt>1880-18ff </tt> : pnp 00:01
<tt>1c00-1c3f </tt> : nVidia Corporation MCP51 SMBus (rev a2)
<tt> 1c00-1c3f </tt> : nForce2_smbus
<tt>1c40-1c7f </tt> : nVidia Corporation MCP51 SMBus (rev a2)
<tt> 1c40-1c7f </tt> : nForce2_smbus
<tt>2000-207f </tt> : pnp 00:01
<tt>2080-20ff </tt> : pnp 00:01
<tt>8000-8fff </tt> : PCI Bus 0000:01
<tt>9000-9fff </tt> : PCI Bus 0000:03
<tt>a000-afff </tt> : PCI Bus 0000:02
<tt>b000-bfff </tt> : PCI Bus 0000:04
<tt>c000-c007 </tt> : nVidia Corporation MCP51 Ethernet Controller (rev a1)
<tt> c000-c007 </tt> : Reverse Engineered nForce ethernet driver
<tt>c400-c4ff </tt> : nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
<tt> c400-c4ff </tt> : Intel ICH
<tt>c800-c8ff </tt> : nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
<tt> c800-c8ff </tt> : Intel ICH
<tt>cc00-cc0f </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> cc00-cc0f </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>e000-e00f </tt> : nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
<tt> e000-e00f </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>f400-f40f </tt> : nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
<tt> f400-f40f </tt> : low-level driver for AMD and Nvidia PATA IDE
-Memory-
<tt>00000000-
<tt>00010000-
<tt>0009f400-
<tt>000f0000-
<tt>00100000-
<tt> 01000000-0154b078 </tt> : Kernel code
<tt> 0154b079-0183290f </tt> : Kernel data
<tt> 0191a000-01a2ca63 </tt> : Kernel bss
<tt>3bff0000-
<tt>3bff3000-
<tt>3c000000-
<tt> 3c000000-3fffffff </tt> : pnp 00:01
<tt>40000000-
<tt>e0000000-
<tt>f0000000-
<tt> f0000000-f3ffffff </tt> : reserved
<tt> f0000000-f3ffffff </tt> : pnp 00:0e
<tt>fb000000-
<tt>fc000000-
<tt> fc000000-fcffffff </tt> : nvidia
<tt>fd700000-
<tt>fd800000-
<tt>fd900000-
<tt>fda00000-
<tt>fdb00000-
<tt>fdc00000-
<tt>fdd00000-
<tt>fde00000-
<tt>fe02a000-
<tt> fe02a000-fe02afff </tt> : Reverse Engineered nForce ethernet driver
<tt>fe02b000-
<tt> fe02b000-fe02bfff </tt> : Intel ICH
<tt>fe02c000-
<tt> fe02c000-fe02cfff </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>fe02d000-
<tt> fe02d000-fe02dfff </tt> : low-level driver for NVIDIA nForce SATA controller
<tt>fe02e000-
<tt> fe02e000-fe02e0ff </tt> : ehci_hcd
<tt>fe02f000-
<tt> fe02f000-fe02ffff </tt> : ohci_hcd
<tt>fec00000-
<tt> fec00000-fec00fff </tt> : IOAPIC 0
<tt> fec80000-fecbffff </tt> : pnp 00:01
<tt> fee00000-feefffff </tt> : pnp 00:0f
<tt> fee00000-fee00fff </tt> : Local APIC
<tt> fefe0000-fefe01ff </tt> : pnp 00:01
<tt> feff0000-feff03ff </tt> : HPET 0
<tt> feff0000-feff00ff </tt> : pnp 00:0f
<tt> fefff000-feffffff </tt> : pnp 00:0f
<tt> fff80000-fff80fff </tt> : pnp 00:0f
<tt> fff90000-fffbffff </tt> : pnp 00:0f
<tt> fffed000-fffeffff </tt> : pnp 00:0f
<tt> ffff0000-ffffffff </tt> : pnp 00:0f
-DMA-
<tt> 2</tt> : floppy
<tt> 4</tt> : cascade
|
Revision history for this message
|
#6 |
Further investigation suggests that the computer no longer recognises a previously bootable flash drive as a boot device. This is making me wonder if the issue is somewhere between the USB host controller and the headers on the motherboard?
If that is the case, then it's a going to be "hardware fault". In any event, I suspect it's not the OS, as an OS fault would not prevent the bios booting from USB!
Maybe I need to take a close look at caps on the mobo, thinking of the dodgy electrolyte issue.
|
Revision history for this message
|
#7 |
I hope to have a PCI / USB controller card within the next 48 hours. I now suspect this is a hardware fault that is somehow affecting the USB data electrical interface but not the power interface. I'll close this if the new USB controller card works.
|
Revision history for this message
|
#8 |
Confirmed that fitting a PCI USB controller card has restored USB functionality to the system but not the originally affected ports. Definitely a hardware problem. I guess I need to look round for a new motherboard.
