cant connect to WEP connection
i have a [d-link wua 1340] i installed the driver using wine and ndiswrapper. hoever i can only connect to unsecure wireless connections.
OS: ubuntu 7.04 feisty
Wireless connection: 2WIRE195
ISP: Quest High Speed
after entering the WEP code it trys to connect but it askes again for my WEP code.
the wireless manager for the d-link wont run correctly in wine, it keeps on saying that the wireless adapter isnt there
is there a way to get the current manager to connect or is there a different wireless-mananger that i can use to do it.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Dakunesu
- Solved:
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
|
Revision history for this message
|
#1 |
Did you try Network Manager? That's usually your new-best-friend when it comes to wireless management.
Then are you running Edgy or Feisty?
In any case, this post could be usefull:
http://
Look for TripleCheese post.
|
Revision history for this message
|
#2 |
yeahhhh... i may have been solving my own problems but i dont think i can do what triple with cheese did. ive tried using 'make' for programs that i found but it never works.
im using what ever one came with gnome( Network Manager and Network Manage-gnome are installed ) and i have the "windows wireless drivers" GUI package that came from ndiswrapper
i blacklisted the default wireless driver because it kept tring to take over and stopped ALL connection. (rt73usb) im not sure what (bcm43xx) does but one of my guides said to blacklist that.
The current driver thats controlling it is (dr71wu) that was on the disk that came with it and the ndiswrapper site said its compatable
Ubuntu 7.04
latest kernal i think
USB: 1.something
|
Revision history for this message
|
#4 |
Ok, try this:
connect to the network, enter your WEP key
Open a terminal, then type "dmesg"
It should display a log, can you check if the latest lines refer to the wireless connection and copy paste them here?
|
Revision history for this message
|
#5 |
when it attempts to access the WEP connection it gives me this
dakunesu@
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000017dd0000 end: 0000000017ed0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000017ed0000 size: 0000000000020000 end: 0000000017ef0000 type: 4
[ 0.000000] copy_e820_map() start: 0000000017ef0000 size: 0000000000010000 end: 0000000017f00000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000feea0000 size: 0000000001160000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
[ 0.000000] BIOS-e820: 0000000017ed0000 - 0000000017ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
[ 0.000000] BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8da0
[ 0.000000] Entering add_active_range(0, 0, 98048) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 98048
[ 0.000000] HighMem 98048 -> 98048
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 98048
[ 0.000000] On node 0 totalpages: 98048
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 734 pages used for memmap
[ 0.000000] Normal zone: 93218 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010
[ 0.000000] ACPI: RSDT (v001 COMPAQ CPQ0005 0x20000825 0x00000000) @ 0x000e0080
[ 0.000000] ACPI: FADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e0130
[ 0.000000] ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e136c
[ 0.000000] ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e14e0
[ 0.000000] ACPI: SSDT (v001 COMPAQ FHUB 0x00000001 MSFT 0x0100000d) @ 0x000e32eb
[ 0.000000] ACPI: MADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e01a4
[ 0.000000] ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000d) @ 0x000e3275
[ 0.000000] ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e2380
[ 0.000000] ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000d) @ 0x000e2a8b
[ 0.000000] ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2c1d
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e2e81
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF1 0x00000001 MSFT 0x0100000d) @ 0x000e2f7e
[ 0.000000] ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2d4f
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF2 0x00000001 MSFT 0x0100000d) @ 0x000e307b
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF3 0x00000001 MSFT 0x0100000d) @ 0x000e3178
[ 0.000000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 17f00000:e6fa0000)
[ 0.000000] Detected 865.487 MHz processor.
[ 19.837546] Built 1 zonelists. Total pages: 97282
[ 19.837555] Kernel command line: root=UUID=
[ 19.838019] mapped APIC to ffffd000 (fee00000)
[ 19.838027] mapped IOAPIC to ffffc000 (fec00000)
[ 19.838036] Enabling fast FPU save and restore... done.
[ 19.838043] Enabling unmasked SIMD FPU exception support... done.
[ 19.838062] Initializing CPU#0
[ 19.838154] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 19.840105] Console: colour VGA+ 80x25
[ 19.841176] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.842456] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.878977] Memory: 377400k/392192k available (1993k kernel code, 13960k reserved, 900k data, 328k init, 0k highmem)
[ 19.879004] virtual kernel memory layout:
[ 19.879007] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 19.879011] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.879014] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
[ 19.879017] lowmem : 0xc0000000 - 0xd7f00000 ( 383 MB)
[ 19.879021] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 19.879024] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB)
[ 19.879027] .text : 0xc0100000 - 0xc02f2434 (1993 kB)
[ 19.879036] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.958143] Calibrating delay using timer specific routine.. 1732.39 BogoMIPS (lpj=3464781)
[ 19.958240] Security Framework v1.0.0 initialized
[ 19.958260] SELinux: Disabled at boot.
[ 19.958300] Mount-cache hash table entries: 512
[ 19.958601] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 19.958626] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 19.958633] CPU: L2 cache: 256K
[ 19.958641] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 19.958666] Compat vDSO mapped to ffffe000.
[ 19.958683] Remapping vsyscall page to ffffe000
[ 19.958706] Checking 'hlt' instruction... OK.
[ 19.974344] SMP alternatives: switching to UP code
[ 19.974703] Freeing SMP alternatives: 11k freed
[ 19.975112] Early unpacking initramfs... done
[ 20.718578] ACPI: Core revision 20060707
[ 20.718851] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.723592] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 20.723651] Total of 1 processors activated (1732.39 BogoMIPS).
[ 20.723793] ENABLING IO-APIC IRQs
[ 20.724019] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.870114] Brought up 1 CPUs
[ 20.870672] Booting paravirtualized kernel on bare hardware
[ 20.870804] Time: 15:29:42 Date: 08/17/107
[ 20.870880] NET: Registered protocol family 16
[ 20.871092] EISA bus registered
[ 20.871103] ACPI: bus type pci registered
[ 20.872672] PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
[ 20.872677] PCI: Using configuration type 1
[ 20.872682] Setting up standard PCI resources
[ 20.941558] ACPI: Interpreter enabled
[ 20.941568] ACPI: Using IOAPIC for interrupt routing
[ 20.942757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 20.943241] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11)
[ 20.943720] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.944201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.944679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 20.945151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.945635] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11)
[ 20.946153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11)
[ 20.946464] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.946477] PCI: Probing PCI hardware (bus 00)
[ 20.947238] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 20.947765] Boot video device is 0000:00:02.0
[ 20.947890] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
[ 20.947898] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
[ 20.948116] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 20.948354] PCI: Transparent bridge - 0000:00:1e.0
[ 20.948391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.953413] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 20.960022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.960054] pnp: PnP ACPI init
[ 20.967509] pnp: PnP ACPI: found 16 devices
[ 20.967521] PnPBIOS: Disabled by ACPI PNP
[ 20.967661] PCI: Using ACPI for IRQ routing
[ 20.967669] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.158793] NET: Registered protocol family 8
[ 21.158799] NET: Registered protocol family 20
[ 21.160107] pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 21.160123] pnp: 00:0e: ioport range 0x400-0x41f has been reserved
[ 21.160133] pnp: 00:0e: ioport range 0x420-0x43f has been reserved
[ 21.160140] pnp: 00:0e: ioport range 0x440-0x45f has been reserved
[ 21.160147] pnp: 00:0e: ioport range 0x460-0x47f could not be reserved
[ 21.160154] pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved
[ 21.160161] pnp: 00:0e: ioport range 0xf820-0xf83f could not be reserved
[ 21.160169] pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
[ 21.160176] pnp: 00:0e: ioport range 0xf860-0xf87f has been reserved
[ 21.160861] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 21.160875] PCI: Bridge: 0000:00:1e.0
[ 21.160881] IO window: 1000-1fff
[ 21.160891] MEM window: 40000000-404fffff
[ 21.160898] PREFETCH window: disabled.
[ 21.160920] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 21.160987] NET: Registered protocol family 2
[ 21.198172] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.198392] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.198791] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.199039] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.199046] TCP reno registered
[ 21.210350] checking if image is initramfs... it is
[ 22.610451] Freeing initrd memory: 6791k freed
[ 22.611568] audit: initializing netlink socket (disabled)
[ 22.611605] audit(119004298
[ 22.611936] VFS: Disk quotas dquot_6.5.1
[ 22.611987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.612107] io scheduler noop registered
[ 22.612115] io scheduler anticipatory registered
[ 22.612121] io scheduler deadline registered
[ 22.612146] io scheduler cfq registered (default)
[ 22.612670] isapnp: Scanning for PnP cards...
[ 22.966644] isapnp: No Plug & Play device found
[ 23.032733] Real Time Clock Driver v1.12ac
[ 23.032844] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.033036] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.033385] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.034800] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.035295] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.035825] mice: PS/2 mouse device common for all mice
[ 23.037198] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.037907] input: Macintosh mouse button emulation as /class/input/input0
[ 23.037990] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.038000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.038427] PNP: PS/2 Controller [PNP0303:
[ 23.041960] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.041976] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.042365] EISA: Probing bus 0 at eisa.0
[ 23.042384] Cannot allocate resource for EISA slot 1
[ 23.042390] Cannot allocate resource for EISA slot 2
[ 23.042423] EISA: Detected 0 cards.
[ 23.072631] TCP cubic registered
[ 23.072650] NET: Registered protocol family 1
[ 23.072703] Using IPI No-Shortcut mode
[ 23.072858] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.072952] Magic number: 7:811:487
[ 23.073718] Time: tsc clocksource has been installed.
[ 23.074199] Freeing unused kernel memory: 328k freed
[ 23.088430] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.643528] Capability LSM initialized
[ 24.746132] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 26.106858] SCSI subsystem initialized
[ 26.128612] libata version 2.20 loaded.
[ 26.141182] ata_piix 0000:00:1f.1: version 2.10ac1
[ 26.141240] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 26.141397] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012460 irq 14
[ 26.141534] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012468 irq 15
[ 26.141571] scsi0 : ata_piix
[ 26.170993] usbcore: registered new interface driver usbfs
[ 26.171051] usbcore: registered new interface driver hub
[ 26.171106] usbcore: registered new device driver usb
[ 26.174858] USB Universal Host Controller Interface driver v3.0
[ 26.202476] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 26.202487] e100: Copyright(c) 1999-2006 Intel Corporation
[ 26.314442] ata1.00: ata_hpa_resize 1: sectors = 39102336, hpa_sectors = 39102336
[ 26.314455] ata1.00: ATA-5: WDC WD200BB-00AUA1, 18.20D18, max UDMA/100
[ 26.314462] ata1.00: 39102336 sectors, multi 16: LBA
[ 26.315271] ata1.01: ata_hpa_resize 1: sectors = 30043440, hpa_sectors = 30043440
[ 26.315280] ata1.01: ATA-4: WDC WD153BA, 16.13M16, max UDMA/66
[ 26.315287] ata1.01: 30043440 sectors, multi 16: LBA
[ 26.315303] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 26.315311] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 26.322524] ata1.00: ata_hpa_resize 1: sectors = 39102336, hpa_sectors = 39102336
[ 26.322540] ata1.00: configured for UDMA/33
[ 26.330311] ata1.01: ata_hpa_resize 1: sectors = 30043440, hpa_sectors = 30043440
[ 26.330321] ata1.01: configured for UDMA/33
[ 26.330349] scsi1 : ata_piix
[ 26.664811] Floppy drive(s): fd0 is 1.44M
[ 26.684740] FDC 0 is a post-1991 82077
[ 26.829501] ata2.00: ATAPI, max UDMA/44
[ 26.829512] ata2.01: ATAPI, max MWDMA2, CDB intr
[ 26.829529] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 27.009465] ata2.00: configured for UDMA/33
[ 27.173465] ata2.01: configured for MWDMA2
[ 27.173774] scsi 0:0:0:0: Direct-Access ATA WDC WD200BB-00AU 18.2 PQ: 0 ANSI: 5
[ 27.174661] scsi 0:0:1:0: Direct-Access ATA WDC WD153BA 16.1 PQ: 0 ANSI: 5
[ 27.176638] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-5236V R$07 PQ: 0 ANSI: 5
[ 27.177432] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 40X/AKU T02 PQ: 0 ANSI: 5
[ 27.182179] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16
[ 27.182208] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 27.182217] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 27.182468] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
[ 27.182511] uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440
[ 27.182797] usb usb1: configuration #1 chosen from 1 choice
[ 27.182860] hub 1-0:1.0: USB hub found
[ 27.182880] hub 1-0:1.0: 2 ports detected
[ 27.285768] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 27.372693] e100: eth0: e100_probe: addr 0x40100000, irq 17, MAC addr 00:02:A5:57:C3:91
[ 27.411381] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 27.411446] sda: Write Protect is off
[ 27.411452] sda: Mode Sense: 00 3a 00 00
[ 27.411492] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.411628] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 27.411652] sda: Write Protect is off
[ 27.411658] sda: Mode Sense: 00 3a 00 00
[ 27.411695] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.411707] sda: sda1 sda2 < sda5 >
[ 27.464396] sd 0:0:0:0: Attached scsi disk sda
[ 27.469357] SCSI device sdb: 30043440 512-byte hdwr sectors (15382 MB)
[ 27.469394] sdb: Write Protect is off
[ 27.469400] sdb: Mode Sense: 00 3a 00 00
[ 27.469439] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.469568] SCSI device sdb: 30043440 512-byte hdwr sectors (15382 MB)
[ 27.469592] sdb: Write Protect is off
[ 27.469598] sdb: Mode Sense: 00 3a 00 00
[ 27.469635] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.469643] sdb: sdb1
[ 27.498102] sd 0:0:1:0: Attached scsi disk sdb
[ 27.511444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.511734] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 27.512041] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 27.512389] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 27.564753] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 27.564767] Uniform CD-ROM driver Revision: 3.20
[ 27.565424] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 27.575789] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 27.576336] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 28.013635] Attempting manual resume
[ 28.013645] swsusp: Resume From Partition 8:5
[ 28.013649] PM: Checking swsusp image.
[ 28.014043] PM: Resume from disk failed.
[ 28.085520] kjournald starting. Commit interval 5 seconds
[ 28.085553] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.996330] NET: Registered protocol family 17
[ 44.680398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.686536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.049669] iTCO_vendor_
[ 45.053584] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 45.053784] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x7860)
[ 45.053810] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
[ 45.053885] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.086806] Intel 82802 RNG detected
[ 45.998758] Linux agpgart interface v0.102 (c) Dave Jones
[ 46.012429] agpgart: Detected an Intel i815 Chipset.
[ 46.017596] agpgart: detected 4MB dedicated video ram.
[ 46.023370] agpgart: AGP aperture is 64M @ 0x44000000
[ 46.033170] input: PC Speaker as /class/input/input2
[ 46.222050] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 46.230581] parport: PnPBIOS parport detected.
[ 46.230641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[ 46.709760] input: PS/2 Generic Mouse as /class/input/input3
[ 47.778070] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 53.321979] AC'97 0 analog subsections not ready
[ 53.346889] gameport: is , io 0x200, speed 852kHz
[ 53.637496] fuse init (API version 7.8)
[ 53.685063] lp0: using parport0 (interrupt-driven).
[ 53.760964] Adding 859436k swap on /dev/disk/
[ 53.944021] EXT3 FS on sda1, internal journal
[ 60.795121] input: Power Button (FF) as /class/input/input4
[ 60.805147] ACPI: Power Button (FF) [PWRF]
[ 60.877142] input: Power Button (CM) as /class/input/input5
[ 60.877784] ACPI: Power Button (CM) [PBTN]
[ 61.104081] No dock devices found.
[ 61.139383] ibm_acpi: ec object not found
[ 61.292417] Using specific hotkey driver
[ 61.410973] pcc_acpi: loading...
[ 69.714040] [drm] Initialized drm 1.1.0 20060810
[ 69.728311] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 69.730293] [drm] Initialized i810 1.4.0 20030605 on minor 0
[ 69.732010] mtrr: base(0x44000000) is not aligned on a size(0x180000) boundary
[ 69.742964] [drm] Using v1.4 init.
[ 70.578026] ppdev: user-space parallel port driver
[ 71.793554] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 71.793566] apm: overridden by ACPI.
[ 72.439202] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 72.826760] NFSD: Using /var/lib/
[ 72.837466] NFSD: starting 90-second grace period
[ 77.046436] Bluetooth: Core ver 2.11
[ 77.046564] NET: Registered protocol family 31
[ 77.046569] Bluetooth: HCI device and connection manager initialized
[ 77.046576] Bluetooth: HCI socket layer initialized
[ 77.182276] Bluetooth: L2CAP ver 2.8
[ 77.182287] Bluetooth: L2CAP socket layer initialized
[ 77.192558] Bluetooth: RFCOMM socket layer initialized
[ 77.192592] Bluetooth: RFCOMM TTY layer initialized
[ 77.192597] Bluetooth: RFCOMM ver 1.8
[ 86.240641] NET: Registered protocol family 10
[ 86.240881] lo: Disabled Privacy Extensions
[ 86.241008] ADDRCONF(
[ 415.785463] ndiswrapper version 1.38 loaded (preempt=
[ 415.847075] usbcore: registered new interface driver ndiswrapper
[ 430.322973] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 430.626006] usb 1-1: configuration #1 chosen from 1 choice
[ 430.746936] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 431.011315] ndiswrapper: driver dr71wu (D-Link,11/03/2005, 1.0.1.0) loaded
[ 432.290973] wlan0: ethernet device 00:15:e9:bd:85:4e using NDIS driver: dr71wu, version: 0x0, NDIS version: 0x500, vendor: 'D-Link USB Wireless LAN Card', 07D1:3C04.F.conf
[ 432.293299] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 434.980261] ADDRCONF(
[ 443.834188] ADDRCONF(
[ 449.786402] ADDRCONF(
[ 471.361854] wlan0: no IPv6 routers present
[ 1231.263070] wlan0: no IPv6 routers present
with the unsecure connection that i have been using it says
dakunesu@
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000017dd0000 end: 0000000017ed0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000017ed0000 size: 0000000000020000 end: 0000000017ef0000 type: 4
[ 0.000000] copy_e820_map() start: 0000000017ef0000 size: 0000000000010000 end: 0000000017f00000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000feea0000 size: 0000000001160000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
[ 0.000000] BIOS-e820: 0000000017ed0000 - 0000000017ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
[ 0.000000] BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8da0
[ 0.000000] Entering add_active_range(0, 0, 98048) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 98048
[ 0.000000] HighMem 98048 -> 98048
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 98048
[ 0.000000] On node 0 totalpages: 98048
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 734 pages used for memmap
[ 0.000000] Normal zone: 93218 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010
[ 0.000000] ACPI: RSDT (v001 COMPAQ CPQ0005 0x20000825 0x00000000) @ 0x000e0080
[ 0.000000] ACPI: FADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e0130
[ 0.000000] ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e136c
[ 0.000000] ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e14e0
[ 0.000000] ACPI: SSDT (v001 COMPAQ FHUB 0x00000001 MSFT 0x0100000d) @ 0x000e32eb
[ 0.000000] ACPI: MADT (v001 COMPAQ SOLANO 0x00000001 0x00000000) @ 0x000e01a4
[ 0.000000] ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000d) @ 0x000e3275
[ 0.000000] ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e2380
[ 0.000000] ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000d) @ 0x000e2a8b
[ 0.000000] ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2c1d
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e2e81
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF1 0x00000001 MSFT 0x0100000d) @ 0x000e2f7e
[ 0.000000] ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2d4f
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF2 0x00000001 MSFT 0x0100000d) @ 0x000e307b
[ 0.000000] ACPI: SSDT (v001 COMPAQ GTF3 0x00000001 MSFT 0x0100000d) @ 0x000e3178
[ 0.000000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 17f00000:e6fa0000)
[ 0.000000] Detected 865.487 MHz processor.
[ 19.837546] Built 1 zonelists. Total pages: 97282
[ 19.837555] Kernel command line: root=UUID=
[ 19.838019] mapped APIC to ffffd000 (fee00000)
[ 19.838027] mapped IOAPIC to ffffc000 (fec00000)
[ 19.838036] Enabling fast FPU save and restore... done.
[ 19.838043] Enabling unmasked SIMD FPU exception support... done.
[ 19.838062] Initializing CPU#0
[ 19.838154] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 19.840105] Console: colour VGA+ 80x25
[ 19.841176] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.842456] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.878977] Memory: 377400k/392192k available (1993k kernel code, 13960k reserved, 900k data, 328k init, 0k highmem)
[ 19.879004] virtual kernel memory layout:
[ 19.879007] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 19.879011] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.879014] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
[ 19.879017] lowmem : 0xc0000000 - 0xd7f00000 ( 383 MB)
[ 19.879021] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 19.879024] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB)
[ 19.879027] .text : 0xc0100000 - 0xc02f2434 (1993 kB)
[ 19.879036] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.958143] Calibrating delay using timer specific routine.. 1732.39 BogoMIPS (lpj=3464781)
[ 19.958240] Security Framework v1.0.0 initialized
[ 19.958260] SELinux: Disabled at boot.
[ 19.958300] Mount-cache hash table entries: 512
[ 19.958601] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 19.958626] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 19.958633] CPU: L2 cache: 256K
[ 19.958641] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 19.958666] Compat vDSO mapped to ffffe000.
[ 19.958683] Remapping vsyscall page to ffffe000
[ 19.958706] Checking 'hlt' instruction... OK.
[ 19.974344] SMP alternatives: switching to UP code
[ 19.974703] Freeing SMP alternatives: 11k freed
[ 19.975112] Early unpacking initramfs... done
[ 20.718578] ACPI: Core revision 20060707
[ 20.718851] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.723592] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 20.723651] Total of 1 processors activated (1732.39 BogoMIPS).
[ 20.723793] ENABLING IO-APIC IRQs
[ 20.724019] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.870114] Brought up 1 CPUs
[ 20.870672] Booting paravirtualized kernel on bare hardware
[ 20.870804] Time: 15:29:42 Date: 08/17/107
[ 20.870880] NET: Registered protocol family 16
[ 20.871092] EISA bus registered
[ 20.871103] ACPI: bus type pci registered
[ 20.872672] PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
[ 20.872677] PCI: Using configuration type 1
[ 20.872682] Setting up standard PCI resources
[ 20.941558] ACPI: Interpreter enabled
[ 20.941568] ACPI: Using IOAPIC for interrupt routing
[ 20.942757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 20.943241] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11)
[ 20.943720] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.944201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.944679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 20.945151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 20.945635] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11)
[ 20.946153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11)
[ 20.946464] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.946477] PCI: Probing PCI hardware (bus 00)
[ 20.947238] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 20.947765] Boot video device is 0000:00:02.0
[ 20.947890] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
[ 20.947898] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
[ 20.948116] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 20.948354] PCI: Transparent bridge - 0000:00:1e.0
[ 20.948391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.953413] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 20.960022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.960054] pnp: PnP ACPI init
[ 20.967509] pnp: PnP ACPI: found 16 devices
[ 20.967521] PnPBIOS: Disabled by ACPI PNP
[ 20.967661] PCI: Using ACPI for IRQ routing
[ 20.967669] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.158793] NET: Registered protocol family 8
[ 21.158799] NET: Registered protocol family 20
[ 21.160107] pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 21.160123] pnp: 00:0e: ioport range 0x400-0x41f has been reserved
[ 21.160133] pnp: 00:0e: ioport range 0x420-0x43f has been reserved
[ 21.160140] pnp: 00:0e: ioport range 0x440-0x45f has been reserved
[ 21.160147] pnp: 00:0e: ioport range 0x460-0x47f could not be reserved
[ 21.160154] pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved
[ 21.160161] pnp: 00:0e: ioport range 0xf820-0xf83f could not be reserved
[ 21.160169] pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
[ 21.160176] pnp: 00:0e: ioport range 0xf860-0xf87f has been reserved
[ 21.160861] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 21.160875] PCI: Bridge: 0000:00:1e.0
[ 21.160881] IO window: 1000-1fff
[ 21.160891] MEM window: 40000000-404fffff
[ 21.160898] PREFETCH window: disabled.
[ 21.160920] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 21.160987] NET: Registered protocol family 2
[ 21.198172] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.198392] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.198791] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.199039] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.199046] TCP reno registered
[ 21.210350] checking if image is initramfs... it is
[ 22.610451] Freeing initrd memory: 6791k freed
[ 22.611568] audit: initializing netlink socket (disabled)
[ 22.611605] audit(119004298
[ 22.611936] VFS: Disk quotas dquot_6.5.1
[ 22.611987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.612107] io scheduler noop registered
[ 22.612115] io scheduler anticipatory registered
[ 22.612121] io scheduler deadline registered
[ 22.612146] io scheduler cfq registered (default)
[ 22.612670] isapnp: Scanning for PnP cards...
[ 22.966644] isapnp: No Plug & Play device found
[ 23.032733] Real Time Clock Driver v1.12ac
[ 23.032844] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.033036] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.033385] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.034800] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.035295] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.035825] mice: PS/2 mouse device common for all mice
[ 23.037198] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.037907] input: Macintosh mouse button emulation as /class/input/input0
[ 23.037990] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.038000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.038427] PNP: PS/2 Controller [PNP0303:
[ 23.041960] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.041976] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.042365] EISA: Probing bus 0 at eisa.0
[ 23.042384] Cannot allocate resource for EISA slot 1
[ 23.042390] Cannot allocate resource for EISA slot 2
[ 23.042423] EISA: Detected 0 cards.
[ 23.072631] TCP cubic registered
[ 23.072650] NET: Registered protocol family 1
[ 23.072703] Using IPI No-Shortcut mode
[ 23.072858] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.072952] Magic number: 7:811:487
[ 23.073718] Time: tsc clocksource has been installed.
[ 23.074199] Freeing unused kernel memory: 328k freed
[ 23.088430] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.643528] Capability LSM initialized
[ 24.746132] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 26.106858] SCSI subsystem initialized
[ 26.128612] libata version 2.20 loaded.
[ 26.141182] ata_piix 0000:00:1f.1: version 2.10ac1
[ 26.141240] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 26.141397] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012460 irq 14
[ 26.141534] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012468 irq 15
[ 26.141571] scsi0 : ata_piix
[ 26.170993] usbcore: registered new interface driver usbfs
[ 26.171051] usbcore: registered new interface driver hub
[ 26.171106] usbcore: registered new device driver usb
[ 26.174858] USB Universal Host Controller Interface driver v3.0
[ 26.202476] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 26.202487] e100: Copyright(c) 1999-2006 Intel Corporation
[ 26.314442] ata1.00: ata_hpa_resize 1: sectors = 39102336, hpa_sectors = 39102336
[ 26.314455] ata1.00: ATA-5: WDC WD200BB-00AUA1, 18.20D18, max UDMA/100
[ 26.314462] ata1.00: 39102336 sectors, multi 16: LBA
[ 26.315271] ata1.01: ata_hpa_resize 1: sectors = 30043440, hpa_sectors = 30043440
[ 26.315280] ata1.01: ATA-4: WDC WD153BA, 16.13M16, max UDMA/66
[ 26.315287] ata1.01: 30043440 sectors, multi 16: LBA
[ 26.315303] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 26.315311] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 26.322524] ata1.00: ata_hpa_resize 1: sectors = 39102336, hpa_sectors = 39102336
[ 26.322540] ata1.00: configured for UDMA/33
[ 26.330311] ata1.01: ata_hpa_resize 1: sectors = 30043440, hpa_sectors = 30043440
[ 26.330321] ata1.01: configured for UDMA/33
[ 26.330349] scsi1 : ata_piix
[ 26.664811] Floppy drive(s): fd0 is 1.44M
[ 26.684740] FDC 0 is a post-1991 82077
[ 26.829501] ata2.00: ATAPI, max UDMA/44
[ 26.829512] ata2.01: ATAPI, max MWDMA2, CDB intr
[ 26.829529] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 27.009465] ata2.00: configured for UDMA/33
[ 27.173465] ata2.01: configured for MWDMA2
[ 27.173774] scsi 0:0:0:0: Direct-Access ATA WDC WD200BB-00AU 18.2 PQ: 0 ANSI: 5
[ 27.174661] scsi 0:0:1:0: Direct-Access ATA WDC WD153BA 16.1 PQ: 0 ANSI: 5
[ 27.176638] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-5236V R$07 PQ: 0 ANSI: 5
[ 27.177432] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 40X/AKU T02 PQ: 0 ANSI: 5
[ 27.182179] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16
[ 27.182208] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 27.182217] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 27.182468] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
[ 27.182511] uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440
[ 27.182797] usb usb1: configuration #1 chosen from 1 choice
[ 27.182860] hub 1-0:1.0: USB hub found
[ 27.182880] hub 1-0:1.0: 2 ports detected
[ 27.285768] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 27.372693] e100: eth0: e100_probe: addr 0x40100000, irq 17, MAC addr 00:02:A5:57:C3:91
[ 27.411381] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 27.411446] sda: Write Protect is off
[ 27.411452] sda: Mode Sense: 00 3a 00 00
[ 27.411492] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.411628] SCSI device sda: 39102336 512-byte hdwr sectors (20020 MB)
[ 27.411652] sda: Write Protect is off
[ 27.411658] sda: Mode Sense: 00 3a 00 00
[ 27.411695] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.411707] sda: sda1 sda2 < sda5 >
[ 27.464396] sd 0:0:0:0: Attached scsi disk sda
[ 27.469357] SCSI device sdb: 30043440 512-byte hdwr sectors (15382 MB)
[ 27.469394] sdb: Write Protect is off
[ 27.469400] sdb: Mode Sense: 00 3a 00 00
[ 27.469439] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.469568] SCSI device sdb: 30043440 512-byte hdwr sectors (15382 MB)
[ 27.469592] sdb: Write Protect is off
[ 27.469598] sdb: Mode Sense: 00 3a 00 00
[ 27.469635] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.469643] sdb: sdb1
[ 27.498102] sd 0:0:1:0: Attached scsi disk sdb
[ 27.511444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.511734] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 27.512041] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 27.512389] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 27.564753] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 27.564767] Uniform CD-ROM driver Revision: 3.20
[ 27.565424] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 27.575789] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 27.576336] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 28.013635] Attempting manual resume
[ 28.013645] swsusp: Resume From Partition 8:5
[ 28.013649] PM: Checking swsusp image.
[ 28.014043] PM: Resume from disk failed.
[ 28.085520] kjournald starting. Commit interval 5 seconds
[ 28.085553] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.996330] NET: Registered protocol family 17
[ 44.680398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.686536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.049669] iTCO_vendor_
[ 45.053584] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 45.053784] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x7860)
[ 45.053810] iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
[ 45.053885] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.086806] Intel 82802 RNG detected
[ 45.998758] Linux agpgart interface v0.102 (c) Dave Jones
[ 46.012429] agpgart: Detected an Intel i815 Chipset.
[ 46.017596] agpgart: detected 4MB dedicated video ram.
[ 46.023370] agpgart: AGP aperture is 64M @ 0x44000000
[ 46.033170] input: PC Speaker as /class/input/input2
[ 46.222050] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 46.230581] parport: PnPBIOS parport detected.
[ 46.230641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[ 46.709760] input: PS/2 Generic Mouse as /class/input/input3
[ 47.778070] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 53.321979] AC'97 0 analog subsections not ready
[ 53.346889] gameport: is , io 0x200, speed 852kHz
[ 53.637496] fuse init (API version 7.8)
[ 53.685063] lp0: using parport0 (interrupt-driven).
[ 53.760964] Adding 859436k swap on /dev/disk/
[ 53.944021] EXT3 FS on sda1, internal journal
[ 60.795121] input: Power Button (FF) as /class/input/input4
[ 60.805147] ACPI: Power Button (FF) [PWRF]
[ 60.877142] input: Power Button (CM) as /class/input/input5
[ 60.877784] ACPI: Power Button (CM) [PBTN]
[ 61.104081] No dock devices found.
[ 61.139383] ibm_acpi: ec object not found
[ 61.292417] Using specific hotkey driver
[ 61.410973] pcc_acpi: loading...
[ 69.714040] [drm] Initialized drm 1.1.0 20060810
[ 69.728311] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 69.730293] [drm] Initialized i810 1.4.0 20030605 on minor 0
[ 69.732010] mtrr: base(0x44000000) is not aligned on a size(0x180000) boundary
[ 69.742964] [drm] Using v1.4 init.
[ 70.578026] ppdev: user-space parallel port driver
[ 71.793554] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 71.793566] apm: overridden by ACPI.
[ 72.439202] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 72.826760] NFSD: Using /var/lib/
[ 72.837466] NFSD: starting 90-second grace period
[ 77.046436] Bluetooth: Core ver 2.11
[ 77.046564] NET: Registered protocol family 31
[ 77.046569] Bluetooth: HCI device and connection manager initialized
[ 77.046576] Bluetooth: HCI socket layer initialized
[ 77.182276] Bluetooth: L2CAP ver 2.8
[ 77.182287] Bluetooth: L2CAP socket layer initialized
[ 77.192558] Bluetooth: RFCOMM socket layer initialized
[ 77.192592] Bluetooth: RFCOMM TTY layer initialized
[ 77.192597] Bluetooth: RFCOMM ver 1.8
[ 86.240641] NET: Registered protocol family 10
[ 86.240881] lo: Disabled Privacy Extensions
[ 86.241008] ADDRCONF(
[ 415.785463] ndiswrapper version 1.38 loaded (preempt=
[ 415.847075] usbcore: registered new interface driver ndiswrapper
[ 430.322973] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 430.626006] usb 1-1: configuration #1 chosen from 1 choice
[ 430.746936] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 431.011315] ndiswrapper: driver dr71wu (D-Link,11/03/2005, 1.0.1.0) loaded
[ 432.290973] wlan0: ethernet device 00:15:e9:bd:85:4e using NDIS driver: dr71wu, version: 0x0, NDIS version: 0x500, vendor: 'D-Link USB Wireless LAN Card', 07D1:3C04.F.conf
[ 432.293299] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 434.980261] ADDRCONF(
[ 443.834188] ADDRCONF(
[ 449.786402] ADDRCONF(
[ 471.361854] wlan0: no IPv6 routers present
[ 1231.263070] wlan0: no IPv6 routers present
[ 1334.940538] ADDRCONF(
[ 1352.615934] wlan0: no IPv6 routers present
|
Revision history for this message
|
#6 |
i found a work around to my problem but if there is a way to do it with the default managers please post it
i found a network manager called wicd and it is working on my connection,
Thank you for your time and effort, all of my problems with this computer are solved and i shouldnt need to post any more questions, again Thanks
|
Revision history for this message
|
#7 |
Great if you found a solution...From the log I can just see nothing unfortunately: no error message at the end, so I don't really know what's going on.
Check with gutsy when it's out, drivers will be updated. Maybe it will work without problem then.
