нету драйверов под AgereSystems ET131x

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Так будет чтото зделано или нет?

http://svn.sliepen.eu.org/et131x/ ето дрова под Agere 131x Gigabit Ethernet собирать надо SVN-ом.
http://www.linux.md/forum/viewtopic.php?t=2394 это как собрать,сам ставил на 6.06, 6.10, 7.04!
Было сделано :
1. загрузка драйвера et131x_20060131_v1-2-2.tar.gz с http://sourceforge.net/projects/et131x (с другого компа посредством флеш было передано на комп и распакованы), далее смотрим чтоб у нас было проинсталено маке и gcc.
1.1. $apt-get install make gcc
2. Инсталируем линукс заголовки : $sudo apt-get install build-essential linux-headers-$(uname -r)
3. Заходим в распакованую директрию дров($cd et131x) и пишем
3.1 $make
3.2 $sudo make modules_install
3.3 $insmod et131x.ko
3.4 $sudo depmod
3.5 $sudo modprobe et131x
4. усё дрова втали и начали сразуже работать

P.S. :
Иногда нужно перезагрузить комп.
Был замечен глюк, иногда после апдейта надо пройти процедуру инсталяции дров заново!

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Why you d'ont doing this?
I feel you d'ont interesting on new ideas!
I make driver for "Agere 131x Gigabit Ethernet" and i want to include on distributive in Ubuntu(Kubuntu...).

Proshu proshenie za molchanie... no kak vidite, russkogovoryashix zdes malovato. Khorosho by bylo iz Rossii syuda bolshe polzovateley! :)

K stati, v ubuntu 7.10 uzhe est driver et131x: /lib/modules/2.6.22-14-rt/ubuntu/net/et131x/et131x.ko
Chtoby ego ustanovit, nuzhno lish zadat sleduyushie komandy:

sudo apt-get install linux-ubuntu-modules-$(uname -r)
sudo modprobe et131x

Esli zhelaete zagruzhat driver pri kazhdoy zagruzke Linux, dobavte ego v file /etc/modules, khotya eto ne obyazatelno. Voobshe to, esli linux-ubuntu-modules ustanovlen, to driver dolzhen zagruzitsya abtomaticheski. Vo vsekh sluchayax, kompilirovat noviy driver ne nado.

Здравствуйте, а как насчёт SD/MMC Card Reader он тоже не работает!

Stranno... Obychno SD/MMC reader raspoznaetsya kak obychniy USB disk... Mozhete pozhaluysta prilozhit vyvod sleduyushix komand do i posle vstavlenie kakoy nibud memory kartochki?

1. sudo lspci -vn
2. sudo cat /var/log/dmesg
3. sudo dmesg
4. uname -a
5. cat /etc/issue

Vy mozhete ochen legko sozdat text fily s etoy informaciey sleduyushim putem:
sudo lspci -vn > lspci-vn-do-vstavleniya-karty.txt

Eshe odin vopros: mozhete pozhaluysta podtverdit chto eto vasha model notebuka?
http://tinyurl.com/3ban2w

Spasibo za vnimanie!

http://ru.lge.com/md/product/prodcategorylist.do?actType=detail&currPage=1&categoryId=1000000205&parentCategoryId=0200000503&categoryLevel=&productId=1100002834
DA eto moi notebook.
vivod privedu zavtra toesti 24.10.07

OK, spasibo za podtverzhdenie, budu zhdat vashego otveta. :)

1. root@support02:/home# sudo lspci -vn
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 1854:0081
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: cfe00000-cfefffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: 8086:0000
        Capabilities: [80] Power Management version 2
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 1854:0081
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f8400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f4000000-f5ffffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: 1854:0081
        Capabilities: [a0] Power Management version 2

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f6000000-f7ffffff
        Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: 1854:0081
        Capabilities: [a0] Power Management version 2

00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Memory behind bridge: f8100000-f81fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: 1854:0081
        Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 1800 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 1820 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 1840 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 1860 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 20
        Memory at f8404000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: f8000000-f80fffff
        Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
        Capabilities: [50] Subsystem: 1854:0081

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 1880 [size=16]

00:1f.2 0106: 8086:27c5 (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: 1854:0081
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at 18c8 [size=8]
        I/O ports at 18ac [size=4]
        I/O ports at 18c0 [size=8]
        I/O ports at 18a8 [size=4]
        I/O ports at 18b0 [size=16]
        Memory at f8404400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [70] Power Management version 2

00:1f.3 0c05: 8086:27da (rev 02)
        Subsystem: 1854:0081
        Flags: medium devsel, IRQ 11
        I/O ports at 18e0 [size=32]

01:00.0 0300: 1002:71c5 (prog-if 00 [VGA])
        Subsystem: 1854:0081
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at d0000000 (32-bit, prefetchable) [size=256M]
        I/O ports at 2000 [size=256]
        Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at cfe00000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Legacy Endpoint IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

02:00.0 0200: 11c1:ed00 (rev 02)
        Subsystem: 1854:0081
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f4000000 (64-bit, non-prefetchable) [size=2M]
        [virtual] Expansion ROM at f0000000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
        Capabilities: [48] Express Endpoint IRQ 0
        Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

05:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1005
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at f8100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

06:00.0 0607: 104c:8039
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 168, IRQ 16
        Memory at f8004000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: 88000000-8bfff000 (prefetchable)
        Memory window 1: 8c000000-8ffff000
        I/O window 0: 00005000-000050ff
        I/O window 1: 00005400-000054ff
        16-bit legacy interface ports at 0001

06:00.1 0c00: 104c:803a (prog-if 10 [OHCI])
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at f8006000 (32-bit, non-prefetchable) [size=2K]
        Memory at f8000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

06:00.2 0180: 104c:803b
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 57, IRQ 16
        Memory at f8005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

06:00.3 0805: 104c:803c
        Subsystem: 1854:0081
        Flags: bus master, medium devsel, latency 57, IRQ 16
        Memory at f8006800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

2.
[ 3.244000] usb usb1: configuration #1 chosen from 1 choice
[ 3.244000] hub 1-0:1.0: USB hub found
[ 3.244000] hub 1-0:1.0: 2 ports detected
[ 3.280000] SCSI subsystem initialized
[ 3.284000] libata version 2.20 loaded.
[ 3.320000] ieee1394: Initialized config rom entry `ip1394'
[ 3.348000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.348000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.348000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.348000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.348000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 3.348000] usb usb2: configuration #1 chosen from 1 choice
[ 3.348000] hub 2-0:1.0: USB hub found
[ 3.348000] hub 2-0:1.0: 2 ports detected
[ 3.452000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.452000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.452000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.452000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.452000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.452000] usb usb3: configuration #1 chosen from 1 choice
[ 3.452000] hub 3-0:1.0: USB hub found
[ 3.452000] hub 3-0:1.0: 2 ports detected
[ 3.556000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
[ 3.556000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.556000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.556000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.556000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
[ 3.556000] usb usb4: configuration #1 chosen from 1 choice
[ 3.556000] hub 4-0:1.0: USB hub found
[ 3.556000] hub 4-0:1.0: 2 ports detected
[ 3.660000] ahci 0000:00:1f.2: version 2.1
[ 3.660000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.692000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.928000] usb 2-1: configuration #1 chosen from 1 choice
[ 4.168000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.364000] usb 4-2: configuration #1 chosen from 1 choice
[ 4.380000] usbcore: registered new interface driver hiddev
[ 4.420000] input: HID 04d9:0499 as /class/input/input2
[ 4.420000] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.3-2
[ 4.420000] usbcore: registered new interface driver usbhid
[ 4.420000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.664000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.664000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 4.664000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 4.664000] ata1: SATA max UDMA/133 cmd 0xf88be500 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata2: SATA max UDMA/133 cmd 0xf88be580 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata3: SATA max UDMA/133 cmd 0xf88be600 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata4: SATA max UDMA/133 cmd 0xf88be680 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] scsi0 : ahci
[ 5.148000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.148000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.148000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100
[ 5.148000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.148000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.148000] ata1.00: configured for UDMA/100
[ 5.148000] scsi1 : ahci
[ 5.460000] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.460000] scsi2 : ahci
[ 5.772000] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.772000] scsi3 : ahci
[ 6.084000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.092000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0000 PQ: 0 ANSI: 5
[ 6.092000] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.092000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 6.092000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.092000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.092000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 6.092000] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.092000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.092000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf8404000
[ 6.096000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.096000] usb usb5: configuration #1 chosen from 1 choice
[ 6.096000] hub 5-0:1.0: USB hub found
[ 6.096000] hub 5-0:1.0: 8 ports detected
[ 6.144000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f8006000-f80067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.152000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.156000] sda: Write Protect is off
[ 6.156000] sda: Mode Sense: 00 3a 00 00
[ 6.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.164000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.164000] sda: Write Protect is off
[ 6.164000] sda: Mode Sense: 00 3a 00 00
[ 6.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.164000] sda:<6>usb 4-2: USB disconnect, address 2
[ 6.200000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 6.200000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.200000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.200000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[ 6.200000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[ 6.200000] scsi4 : ata_piix
[ 6.244000] sda1 sda4 < sda5 sda6 sda7 >
[ 6.284000] sd 0:0:0:0: Attached scsi disk sda
[ 6.288000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.520000] ata5.00: ATAPI, max UDMA/33
[ 6.568000] Attempting manual resume
[ 6.568000] swsusp: Resume From Partition 8:5
[ 6.568000] PM: Checking swsusp image.
[ 6.568000] PM: Resume from disk failed.
[ 6.600000] kjournald starting. Commit interval 5 seconds
[ 6.600000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.676000] usb 2-1: USB disconnect, address 2
[ 6.684000] ata5.00: configured for UDMA/33
[ 6.684000] scsi5 : ata_piix
[ 6.684000] ata6: port disabled. ignoring.
[ 6.688000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
[ 6.688000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.916000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 7.136000] usb 2-1: configuration #1 chosen from 1 choice
[ 7.380000] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 7.576000] usb 4-2: configuration #1 chosen from 1 choice
[ 7.624000] input: HID 04d9:0499 as /class/input/input3
[ 7.624000] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.3-2
[ 16.612000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.632000] agpgart: Detected an Intel 945GM Chipset.
[ 16.648000] agpgart: AGP aperture is 256M @ 0x0
[ 16.688000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.716000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.832000] iTCO_vendor_support: vendor-support=0
[ 16.832000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.832000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.832000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.896000] Yenta: CardBus bridge found at 0000:06:00.0 [1854:0081]
[ 16.896000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 16.896000] Yenta: Routing CardBus interrupts to PCI
[ 16.896000] Yenta TI: socket 0000:06:00.0, mfunc 0x01001002, devctl 0x64
[ 17.128000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 17.128000] Socket status: 30000006
[ 17.128000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 17.128000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 17.128000] cs: IO port probe 0x5000-0x5fff: clean.
[ 17.128000] pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xf80fffff
[ 17.128000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 17.132000] intel_rng: FWH not detected
[ 17.212000] et131x: module license 'BSD' taints kernel.
[ 17.216000] 10/100/1000 Base-T Ethernet Driver for the ET1310, v1.2.3 01/31/2006 15:40:00 by Agere Systems, http://www.agere.com
[ 17.224000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.224000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 17.320000] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.356000] tifm_core: MMC/SD card detected in socket 0:1
[ 17.420000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.448000] ieee80211: 802.11 data/management/control stack, 1.2.18
[ 17.448000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 17.480000] Bluetooth: Core ver 2.11
[ 17.480000] NET: Registered protocol family 31
[ 17.480000] Bluetooth: HCI device and connection manager initialized
[ 17.480000] Bluetooth: HCI socket layer initialized
[ 17.532000] Bluetooth: HCI USB driver ver 2.9
[ 17.592000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp
[ 17.592000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 17.592000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 17.592000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 17.592000] ipw3945: Detected Intel PRO/Wireless 3945BG Network Connection
[ 17.612000] sdhci: Secure Digital Host Controller Interface driver
[ 17.612000] sdhci: Copyright(c) Pierre Ossman
[ 17.684000] usbcore: registered new interface driver hci_usb
[ 17.720000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 17.720000] [fglrx] USWC is disabled in module parameters
[ 17.720000] [fglrx] PAT is disabled!
[ 17.720000] [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
[ 17.764000] sdhci: SDHCI controller found at 0000:06:00.3 [104c:803c] (rev 0)
[ 17.764000] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.764000] mmc1: SDHCI at 0xf8006800 irq 16 PIO
[ 17.880000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
[ 17.908000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 17.908000] Uniform CD-ROM driver Revision: 3.20
[ 17.908000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 17.928000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 17.944000] cs: IO port probe 0x100-0x3af: clean.
[ 17.944000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 17.944000] cs: IO port probe 0x820-0x8ff: clean.
[ 17.948000] cs: IO port probe 0xc00-0xcf7: clean.
[ 17.948000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.000000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 18.000000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.208000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 21.160000] lp: driver loaded but no devices found
[ 21.244000] fuse init (API version 7.8)
[ 21.284000] Adding 1815304k swap on /dev/disk/by-uuid/1689846e-7849-11dc-b829-3f96a0611a14. Priority:-1 extents:1 across:1815304k
[ 21.432000] EXT3 FS on sda1, internal journal
[ 21.660000] kjournald starting. Commit interval 5 seconds
[ 21.664000] EXT3 FS on sda7, internal journal
[ 21.664000] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.708000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 21.776000] NTFS volume version 3.1.
[ 23.240000] ipw3945: Detected geography xBG (13 802.11bg channels, 0 802.11a channels)

3.

[ 0.003990] Brought up 2 CPUs
[ 0.152663] migration_cost=32
[ 0.152879] Booting paravirtualized kernel on bare hardware
[ 0.152961] Time: 3:13:00 Date: 09/29/107
[ 0.152984] NET: Registered protocol family 16
[ 0.153053] EISA bus registered
[ 0.153058] ACPI: bus type pci registered
[ 0.153158] PCI: BIOS BUG #81[49435000] found
[ 0.153263] PCI: Using configuration type 1
[ 0.153264] Setting up standard PCI resources
[ 0.160467] ACPI: Interpreter enabled
[ 0.160469] ACPI: Using IOAPIC for interrupt routing
[ 0.162708] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.162713] PCI: Probing PCI hardware (bus 00)
[ 0.164104] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.164108] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.164417] Boot video device is 0000:01:00.0
[ 0.165426] PCI: Transparent bridge - 0000:00:1e.0
[ 0.165492] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[ 0.165494] Please report the result to linux-kernel to fix this permanently
[ 0.165566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.170724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.171166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.171437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.171646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.172571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.173030] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.173244] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173460] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.173672] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.173885] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.174097] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.174311] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.174524] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.178896] ACPI: Power Resource [CTHT] (off)
[ 0.179049] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.179058] pnp: PnP ACPI init
[ 0.181922] pnp: PnP ACPI: found 12 devices
[ 0.181926] PnPBIOS: Disabled by ACPI PNP
[ 0.181960] PCI: Using ACPI for IRQ routing
[ 0.181962] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.182110] NET: Registered protocol family 8
[ 0.182111] NET: Registered protocol family 20
[ 0.182365] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.182368] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.182612] PCI: Bridge: 0000:00:01.0
[ 0.182614] IO window: 2000-2fff
[ 0.182617] MEM window: cfe00000-cfefffff
[ 0.182620] PREFETCH window: d0000000-dfffffff
[ 0.182624] PCI: Bridge: 0000:00:1c.0
[ 0.182626] IO window: 3000-3fff
[ 0.182632] MEM window: f4000000-f5ffffff
[ 0.182636] PREFETCH window: f0000000-f1ffffff
[ 0.182641] PCI: Bridge: 0000:00:1c.2
[ 0.182644] IO window: 4000-4fff
[ 0.182649] MEM window: f6000000-f7ffffff
[ 0.182653] PREFETCH window: f2000000-f3ffffff
[ 0.182659] PCI: Bridge: 0000:00:1c.3
[ 0.182660] IO window: disabled.
[ 0.182665] MEM window: f8100000-f81fffff
[ 0.182669] PREFETCH window: disabled.
[ 0.182676] PCI: Bus 7, cardbus bridge: 0000:06:00.0
[ 0.182678] IO window: 00005000-000050ff
[ 0.182682] IO window: 00005400-000054ff
[ 0.182687] PREFETCH window: 88000000-8bffffff
[ 0.182692] MEM window: 8c000000-8fffffff
[ 0.182697] PCI: Bridge: 0000:00:1e.0
[ 0.182699] IO window: 5000-5fff
[ 0.182705] MEM window: f8000000-f80fffff
[ 0.182709] PREFETCH window: 88000000-8bffffff
[ 0.182723] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.182727] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.182749] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.182754] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.182777] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.182782] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.182804] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.182809] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.182822] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.182838] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.182863] NET: Registered protocol family 2
[ 0.227645] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.227726] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.228091] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.228274] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.228276] TCP reno registered
[ 0.243666] checking if image is initramfs... it is
[ 0.730504] Freeing initrd memory: 6762k freed
[ 0.730671] Simple Boot Flag at 0x38 set to 0x1
[ 0.731079] audit: initializing netlink socket (disabled)
[ 0.731093] audit(1193627580.404:1): initialized
[ 0.731173] highmem bounce pool size: 64 pages
[ 0.731245] VFS: Disk quotas dquot_6.5.1
[ 0.731261] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.731305] io scheduler noop registered
[ 0.731307] io scheduler anticipatory registered
[ 0.731308] io scheduler deadline registered
[ 0.731317] io scheduler cfq registered (default)
[ 0.731546] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.731579] assign_interrupt_mode Found MSI capability
[ 0.731581] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.731660] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.731715] assign_interrupt_mode Found MSI capability
[ 0.731717] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.731747] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.731861] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.731915] assign_interrupt_mode Found MSI capability
[ 0.731917] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.731945] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.732057] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.732112] assign_interrupt_mode Found MSI capability
[ 0.732114] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.732140] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.732306] isapnp: Scanning for PnP cards...
[ 1.086199] isapnp: No Plug & Play device found
[ 1.103173] Real Time Clock Driver v1.12ac
[ 1.103224] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.103361] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.103854] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.104011] mice: PS/2 mouse device common for all mice
[ 1.104470] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.104593] input: Macintosh mouse button emulation as /class/input/input0
[ 1.104624] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.104627] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.104849] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.108117] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.111163] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.111166] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.111167] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.111169] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.111171] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.111266] EISA: Probing bus 0 at eisa.0
[ 1.111273] Cannot allocate resource for EISA slot 1
[ 1.111276] Cannot allocate resource for EISA slot 2
[ 1.111277] Cannot allocate resource for EISA slot 3
[ 1.111279] Cannot allocate resource for EISA slot 4
[ 1.111280] Cannot allocate resource for EISA slot 5
[ 1.111294] EISA: Detected 0 cards.
[ 1.138083] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.141320] TCP cubic registered
[ 1.141327] NET: Registered protocol family 1
[ 1.141345] Starting balanced_irq
[ 1.141350] Using IPI No-Shortcut mode
[ 1.141455] ACPI: (supports S0 S3 S4 S5)
[ 1.141495] Magic number: 11:686:210
[ 1.141506] hash matches device ttyt8
[ 1.141509] hash matches device ttyqb
[ 1.141700] Freeing unused kernel memory: 328k freed
[ 1.142071] Time: tsc clocksource has been installed.
[ 2.305227] Capability LSM initialized
[ 2.359580] ACPI: Transitioning device [FAN0] to D3
[ 2.359583] ACPI: Transitioning device [FAN0] to D3
[ 2.359585] ACPI: Fan [FAN0] (off)
[ 2.367290] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 2.367501] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 2.368041] Monitor-Mwait will be used to enter C-1 state
[ 2.368043] Monitor-Mwait will be used to enter C-2 state
[ 2.368045] Monitor-Mwait will be used to enter C-3 state
[ 2.368055] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.368059] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.368483] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 2.368661] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 2.395978] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.395983] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.396909] ACPI: Thermal Zone [TZ0] (52 C)
[ 2.398967] ACPI: Thermal Zone [TZ1] (45 C)
[ 2.892000] ACPI: Thermal Zone [TZ2] (40 C)
[ 2.896000] Time: hpet clocksource has been installed.
[ 3.244000] usbcore: registered new interface driver usbfs
[ 3.244000] usbcore: registered new interface driver hub
[ 3.244000] usbcore: registered new device driver usb
[ 3.244000] USB Universal Host Controller Interface driver v3.0
[ 3.244000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 3.244000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.244000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.244000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.244000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 3.244000] usb usb1: configuration #1 chosen from 1 choice
[ 3.244000] hub 1-0:1.0: USB hub found
[ 3.244000] hub 1-0:1.0: 2 ports detected
[ 3.280000] SCSI subsystem initialized
[ 3.284000] libata version 2.20 loaded.
[ 3.320000] ieee1394: Initialized config rom entry `ip1394'
[ 3.348000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.348000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.348000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.348000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.348000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 3.348000] usb usb2: configuration #1 chosen from 1 choice
[ 3.348000] hub 2-0:1.0: USB hub found
[ 3.348000] hub 2-0:1.0: 2 ports detected
[ 3.452000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.452000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.452000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.452000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.452000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.452000] usb usb3: configuration #1 chosen from 1 choice
[ 3.452000] hub 3-0:1.0: USB hub found
[ 3.452000] hub 3-0:1.0: 2 ports detected
[ 3.556000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
[ 3.556000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.556000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.556000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.556000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
[ 3.556000] usb usb4: configuration #1 chosen from 1 choice
[ 3.556000] hub 4-0:1.0: USB hub found
[ 3.556000] hub 4-0:1.0: 2 ports detected
[ 3.660000] ahci 0000:00:1f.2: version 2.1
[ 3.660000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.692000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.928000] usb 2-1: configuration #1 chosen from 1 choice
[ 4.168000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.364000] usb 4-2: configuration #1 chosen from 1 choice
[ 4.380000] usbcore: registered new interface driver hiddev
[ 4.420000] input: HID 04d9:0499 as /class/input/input2
[ 4.420000] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.3-2
[ 4.420000] usbcore: registered new interface driver usbhid
[ 4.420000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.664000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.664000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 4.664000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 4.664000] ata1: SATA max UDMA/133 cmd 0xf88be500 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata2: SATA max UDMA/133 cmd 0xf88be580 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata3: SATA max UDMA/133 cmd 0xf88be600 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] ata4: SATA max UDMA/133 cmd 0xf88be680 ctl 0x00000000 bmdma 0x00000000 irq 19
[ 4.664000] scsi0 : ahci
[ 5.148000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.148000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.148000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100
[ 5.148000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.148000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 5.148000] ata1.00: configured for UDMA/100
[ 5.148000] scsi1 : ahci
[ 5.460000] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.460000] scsi2 : ahci
[ 5.772000] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.772000] scsi3 : ahci
[ 6.084000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.092000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0000 PQ: 0 ANSI: 5
[ 6.092000] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.092000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 6.092000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.092000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.092000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 6.092000] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.092000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.092000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf8404000
[ 6.096000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.096000] usb usb5: configuration #1 chosen from 1 choice
[ 6.096000] hub 5-0:1.0: USB hub found
[ 6.096000] hub 5-0:1.0: 8 ports detected
[ 6.144000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f8006000-f80067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.152000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.156000] sda: Write Protect is off
[ 6.156000] sda: Mode Sense: 00 3a 00 00
[ 6.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.164000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.164000] sda: Write Protect is off
[ 6.164000] sda: Mode Sense: 00 3a 00 00
[ 6.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.164000] sda:<6>usb 4-2: USB disconnect, address 2
[ 6.200000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 6.200000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.200000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.200000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[ 6.200000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[ 6.200000] scsi4 : ata_piix
[ 6.244000] sda1 sda4 < sda5 sda6 sda7 >
[ 6.284000] sd 0:0:0:0: Attached scsi disk sda
[ 6.288000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.520000] ata5.00: ATAPI, max UDMA/33
[ 6.568000] Attempting manual resume
[ 6.568000] swsusp: Resume From Partition 8:5
[ 6.568000] PM: Checking swsusp image.
[ 6.568000] PM: Resume from disk failed.
[ 6.600000] kjournald starting. Commit interval 5 seconds
[ 6.600000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.676000] usb 2-1: USB disconnect, address 2
[ 6.684000] ata5.00: configured for UDMA/33
[ 6.684000] scsi5 : ata_piix
[ 6.684000] ata6: port disabled. ignoring.
[ 6.688000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
[ 6.688000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.916000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 7.136000] usb 2-1: configuration #1 chosen from 1 choice
[ 7.380000] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 7.576000] usb 4-2: configuration #1 chosen from 1 choice
[ 7.624000] input: HID 04d9:0499 as /class/input/input3
[ 7.624000] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.3-2
[ 16.612000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.632000] agpgart: Detected an Intel 945GM Chipset.
[ 16.648000] agpgart: AGP aperture is 256M @ 0x0
[ 16.688000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.716000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.832000] iTCO_vendor_support: vendor-support=0
[ 16.832000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.832000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.832000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.896000] Yenta: CardBus bridge found at 0000:06:00.0 [1854:0081]
[ 16.896000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 16.896000] Yenta: Routing CardBus interrupts to PCI
[ 16.896000] Yenta TI: socket 0000:06:00.0, mfunc 0x01001002, devctl 0x64
[ 17.128000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 17.128000] Socket status: 30000006
[ 17.128000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 17.128000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 17.128000] cs: IO port probe 0x5000-0x5fff: clean.
[ 17.128000] pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xf80fffff
[ 17.128000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 17.132000] intel_rng: FWH not detected
[ 17.212000] et131x: module license 'BSD' taints kernel.
[ 17.216000] 10/100/1000 Base-T Ethernet Driver for the ET1310, v1.2.3 01/31/2006 15:40:00 by Agere Systems, http://www.agere.com
[ 17.224000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.224000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 17.320000] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.356000] tifm_core: MMC/SD card detected in socket 0:1
[ 17.420000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.448000] ieee80211: 802.11 data/management/control stack, 1.2.18
[ 17.448000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 17.480000] Bluetooth: Core ver 2.11
[ 17.480000] NET: Registered protocol family 31
[ 17.480000] Bluetooth: HCI device and connection manager initialized
[ 17.480000] Bluetooth: HCI socket layer initialized
[ 17.532000] Bluetooth: HCI USB driver ver 2.9
[ 17.592000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp
[ 17.592000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 17.592000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 17.592000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 17.592000] ipw3945: Detected Intel PRO/Wireless 3945BG Network Connection
[ 17.612000] sdhci: Secure Digital Host Controller Interface driver
[ 17.612000] sdhci: Copyright(c) Pierre Ossman
[ 17.684000] usbcore: registered new interface driver hci_usb
[ 17.720000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 17.720000] [fglrx] USWC is disabled in module parameters
[ 17.720000] [fglrx] PAT is disabled!
[ 17.720000] [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
[ 17.764000] sdhci: SDHCI controller found at 0000:06:00.3 [104c:803c] (rev 0)
[ 17.764000] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.764000] mmc1: SDHCI at 0xf8006800 irq 16 PIO
[ 17.880000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
[ 17.908000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 17.908000] Uniform CD-ROM driver Revision: 3.20
[ 17.908000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 17.928000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 17.944000] cs: IO port probe 0x100-0x3af: clean.
[ 17.944000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 17.944000] cs: IO port probe 0x820-0x8ff: clean.
[ 17.948000] cs: IO port probe 0xc00-0xcf7: clean.
[ 17.948000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.000000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 18.000000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.208000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 21.160000] lp: driver loaded but no devices found
[ 21.244000] fuse init (API version 7.8)
[ 21.284000] Adding 1815304k swap on /dev/disk/by-uuid/1689846e-7849-11dc-b829-3f96a0611a14. Priority:-1 extents:1 across:1815304k
[ 21.432000] EXT3 FS on sda1, internal journal
[ 21.660000] kjournald starting. Commit interval 5 seconds
[ 21.664000] EXT3 FS on sda7, internal journal
[ 21.664000] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.708000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 21.776000] NTFS volume version 3.1.
[ 23.240000] ipw3945: Detected geography xBG (13 802.11bg channels, 0 802.11a channels)
[ 25.560000] ibm_acpi: ec object not found
[ 25.616000] input: Power Button (FF) as /class/input/input5
[ 25.616000] ACPI: Power Button (FF) [PWRF]
[ 25.620000] input: Lid Switch as /class/input/input6
[ 25.620000] ACPI: Lid Switch [LID0]
[ 25.636000] input: Power Button (CM) as /class/input/input7
[ 25.636000] ACPI: Power Button (CM) [PWRB]
[ 25.644000] input: Sleep Button (CM) as /class/input/input8
[ 25.644000] ACPI: Sleep Button (CM) [SLPB]
[ 25.736000] ACPI: AC Adapter [AC] (on-line)
[ 25.752000] ACPI: Battery Slot [CMB0] (battery present)
[ 25.780000] ACPI: Video Device [EGFX] (multi-head: yes rom: no post: no)
[ 25.788000] Using specific hotkey driver
[ 25.808000] No dock devices found.
[ 25.856000] wmi_add device=df8eec00
[ 25.856000] calling WQBA
[ 25.856000] wmi_add device=df8ee800
[ 25.856000] calling WQBA
[ 25.872000] pcc_acpi: loading...
[ 29.448000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8946
[ 31.812000] NET: Registered protocol family 17
[ 41.096000] ppdev: user-space parallel port driver
[ 41.224000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.016000] apm: BIOS not found.
[ 42.456000] NET: Registered protocol family 4
[ 43.336000] device eth0 entered promiscuous mode
[ 43.336000] audit(1193642022.308:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
[ 43.392000] [fglrx] total GART = 130023424
[ 43.392000] [fglrx] free GART = 114032640
[ 43.392000] [fglrx] max single GART = 114032640
[ 43.392000] [fglrx] total LFB = 268304384
[ 43.392000] [fglrx] free LFB = 208613376
[ 43.392000] [fglrx] max single LFB = 208613376
[ 43.392000] [fglrx] total Inv = 0
[ 43.392000] [fglrx] free Inv = 0
[ 43.392000] [fglrx] max single Inv = 0
[ 43.392000] [fglrx] total TIM = 0
[ 44.384000] NET: Registered protocol family 10
[ 44.384000] lo: Disabled Privacy Extensions
[ 44.384000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 44.856000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0d
[ 44.856000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b07
[ 44.856000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0d
[ 45.172000] Bluetooth: L2CAP ver 2.8
[ 45.172000] Bluetooth: L2CAP socket layer initialized
[ 45.204000] Bluetooth: RFCOMM socket layer initialized
[ 45.204000] Bluetooth: RFCOMM TTY layer initialized
[ 45.204000] Bluetooth: RFCOMM ver 1.8
[ 45.340000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 45.644000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 46.144000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 46.400000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 46.904000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 47.156000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 47.660000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 47.916000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 48.416000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 48.672000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 49.172000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b0b
[ 49.428000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
[ 55.204000] eth0: no IPv6 routers present
[ 60.640000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 60.712000] ISOFS: changing to secondary root
[ 66.216000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8946
[ 75.652000] et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8946
4.
root@support02:/home# uname -a
Linux support02 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686 GNU/Linux
5.
root@support02:/home# cat /etc/issue
Ubuntu 7.04 \n \l

Stranno... ya vizhu chto vrode karta raspoznaetsya na kakom-to urovne...
[ 17.356000] tifm_core: MMC/SD card detected in socket 0:1
Mozhete pozhaluysta poprobovat instrukcii vot zdes? http://hem.bredband.net/pauls/linux/lgt1laptop/LG_T1_laptop.html#memorycard

Сейчас всё равно не работает,пишу из ноута вай фай еле еле заработал.

Здравствуйте, переустановил убунту заново. WiFi и сеть заработали нормально, а вот ммс так и не работает. А жаль ради этого приходиться на ноутбук ставить "Хочу денег(Windows)". Пыталься следовать инструкциям по вашей ссылке, не помогло, хоть и определяеться кардридер.

A kogda vstavlyayete kakuyu nibud kartochku, poyavlyayutsya zapisi v dmesg (sudo dmesg | tail) naschet kakix-libo novyx diskov? Tipa sda, sdb, sdc, i.t.p.?

This question was expired because it remained in the 'Needs information' state without activity for the last 15 days.

Нет ничпего не выводиться и самое странное что если я делаю по ссылкам то после перезагрузки после пяти-десяти всавлений карточки в кардридер,она определяеться но стоит её вытащить и опять надо перезагружать компьютер.

Da, interesno... V dmesg nichego interesnogo netu znachit? Nikakikh oshibok/informacii? Nichego pro /dev/mmcblk0p1 ne skazano?

A kogda kara podkluchaetsya i raspoznaetsya (to est vy mozhete videt chto na ney zapisano), mozhete copy paste vyvod komandy mount? Prosto naberite mount chtoby opredelit imya ustroystva card readera. Esli vy sumeete opredelit imya ustroystva cardreadera, to smozhete probovat vruchnuyu delat mount, tipa:
sudo mount /dev/mmcblk0p1 /mnt/sdcard -t vfat

A vy stroky "/dev/mmcblk0p1 /mnt/sdcard vfat user,defaults 0 0" v vash /etc/fstab dobavlyali? Eto v principe ne nuzhno i mozhet byt problematichno (t.e. icon cardreadera na desktope izza etogo mozhet ne poyavitsya pri vstavlenii kartochki).

Здравствуйте, вывод команды mount ничего не даёт, в этом и вся странность.
> A vy stroky "/dev/mmcblk0p1 /mnt/sdcard vfat user,defaults 0 0" v vash /etc/fstab dobavlyali?
И добавлял - ничего, и убирал - ничего.
> Eto v principe ne nuzhno i mozhet byt problematichno (t.e. icon cardreadera na desktope izza etogo mozhet ne poyavitsya pri vstavlenii kartochki).
Проблема не в иконке, просто в /dev/ ничего нового не появляется при вставке карточки.

A v dmesg est kakie-to poleznye soobshenija? Obychno kogda voznikayut problemy s sozdaniem filov v /dev/, komanda dmesg pokazyvaet chto-to poleznoe... tipa kernel panic ili oshibok svyazannykh s kernel modules.

Извините, но на данный момент не могу сказать что пишет dmesg. как только
установлю назад убунту сразу скажу.

2007/11/25, Rouben Tchakhmakhtchian <email address hidden>:
>
> Your question #12554 on Ubuntu changed:
> https://answers.edge.launchpad.net/ubuntu/+question/12554
>
> Status: Open => Needs information
>
> Rouben Tchakhmakhtchian requested for more information:
> A v dmesg est kakie-to poleznye soobshenija? Obychno kogda voznikayut
> problemy s sozdaniem filov v /dev/, komanda dmesg pokazyvaet chto-to
> poleznoe... tipa kernel panic ili oshibok svyazannykh s kernel modules.
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https://answers.edge.launchpad.net/ubuntu/+question/12554
>
> You received this question notification because you are a direct
> subscriber of the question.
>

zdrastvuite vot 4to pokazivaet dmesg :

[ 1393.511938] tifm_core: MMC/SD card detected in socket 0:1
[ 1394.624236] tifm0 : demand removing card from socket 0:1
[ 1394.959710] tifm_core: MMC/SD card detected in socket 0:1
[ 1395.013702] mmcblk0: mmc1:0001 AF HMP 250880KiB
[ 1395.013782] mmcblk0: p1
[ 1711.514000] tifm0 : demand removing card from socket 0:1
root@HackSoft-laptop:/dev#

4to mne mojno sdelati ????

Ya nashel neskolko bugov v kotoryx opisivalas ta zhe samaya situaciya. Tam rekomenduyut kompilirovat novuyu versiyu drivera.

A vasha kartochka novaya? Mozhete ee otformatirovat pod Windows is eshe raz poprobovat? http://ubuntuforums.org/showthread.php?t=404521

I eshe poprobuyte vot etu komandu (tam snachalo po francuzski, no potom v konce to zhe samoe po angliyski): http://drpixel.tuxfamily.org/index.php?2007/07/12/76-lecteur-de-carte-integre-du-hp-nx6125-sous-fedora-7

да моя карточка новая, даже отформатировал под виндовсом, всё также.
Из лога dmesg :
[14421.266924] tifm_core: MMC/SD card detected in socket 0:1
[14443.256509] tifm0 : demand removing card from socket 0:1

есть ли какие обновления?

Poprobuyte pozhaluysta vot etu komandu i soobshite ob itogax:

sudo setpci -s 06:00.2 4c=22

Eto ya vychital otsyuda: http://drpixel.tuxfamily.org/index.php?2007/07/12/76-lecteur-de-carte-integre-du-hp-nx6125-sous-fedora-7
Tam card reader togo zhe proizvoditelya (Texas Instruments) no laptop HP, ne LG. Nadeus chto pomozhet.

Это яя уже сделал, после того мне показывает :
[ 648.218162] tifm_core: MMC/SD card detected in socket 0:1
но в /dev/ никакого mmc не найдено :(

Во-первых хочу поздравить вас с новым годом! :)

Увы вроде у нас ничего не получается. :( Я вот нашел ешё одного человека, Александра Краева, у которого похожая проблема с LG лаптопом, толко вот модель у него другая, и вроде у него вообще ничего не работает, т.е. ни какой реакции, даже в dmesg ничего. Вот его баг:
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/118706

Так как етот баг достаточно отличается от вашей ситуации, я открою новый баг отдельно для вас. Для того чтобы открыт новый баг, мне нужна следуюшая свежая информация от вас. Прошу загрузить Убунту, вставит карточку и запустит следующие команды:

uname -a > uname-a.log
cat /proc/version_signature > version.log
dmesg > dmesg.log
sudo lspci -vvnn > lspci-vvnn.log

Таким образом у вас должно получится четыре файла: uname-a.log, version.log, dmesg.log и lspci-vvnn.log. Если вас не затруднит, прошу послать мне эти файлы на e-mail по адресу <email address hidden>.

Большое спасибо! :)

Здравствуйте! Есть новости?

Здравствуйте,
Извините за задержку, отправлю нужную информацию в течении двух-трёх дней.

OK, net problem.

проблема решена??

К сожалению нет, но пока нет времени на тесты так как ноут стоит под "Хочу бабла" и проводятся активные работы на нём. Как только освободится сразу же отпишусь.