Ubuntu

From time to time, ubuntu does not boot correctly.

Asked by olimag

Hi,

Thank's for translation from Marcus

From time to time, ubuntu does not boot correctly.

Firstly, it does not detect the sound card.

Secondly, the filesystem does not mount without going through sudo. e.g. It wouldn't mount the CD-rom

Lastly, have to go invoke sudo to stop the system

After rebooting once or twice, the machine works correctly.

I have do two installation of ubuntu 10.04, the last from scratch and I hase the same problem.

dmesg :

[ 11.208128] i2c i2c-0: Invalid 7-bit address 0x7a
[ 11.232088] saa7134[0] Board has DVB-T
[ 11.232093] saa7134[0] Tuner type is 63
[ 11.263487] type=1505 audit(1281819451.445:5): operation="profile_load" pid=764 name="/usr/share/gdm/guest-session/Xsession"
[ 11.274145] type=1505 audit(1281819451.457:6): operation="profile_replace" pid=765 name="/sbin/dhclient3"
[ 11.274865] type=1505 audit(1281819451.457:7): operation="profile_replace" pid=765 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.275251] type=1505 audit(1281819451.457:8): operation="profile_replace" pid=765 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.292207] RX DESC f4597000 size = 2048
[ 11.292545] <-- RTMPAllocTxRxRingMemory, Status=0
[ 11.296178] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD657
[ 11.318334] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[ 11.318347] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[ 11.323555] type=1505 audit(1281819451.505:9): operation="profile_load" pid=766 name="/usr/bin/evince"
[ 11.324178] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[ 11.324182] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAC1
[ 11.328099] tuner 0-0061: chip found @ 0xc2 (saa7134[0])
[ 11.340040] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 11.340046] 1. Phy Mode = 0
[ 11.340048] 2. Phy Mode = 0
[ 11.358295] 3. Phy Mode = 0
[ 11.380684] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 11.380688] MCS Set = 00 00 00 00 00
[ 11.382245] <==== RTMPInitialize, Status=0
[ 11.382309] 0x1300 = 00073200
[ 11.382586] [drm] nouveau 0000:01:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[ 11.382596] [drm] nouveau 0000:01:00.0: 0xC1DC: parsing output script 0
[ 11.382602] [drm] nouveau 0000:01:00.0: 0xC1DC: parsing output script 0
[ 11.492304] type=1505 audit(1281819451.677:10): operation="profile_load" pid=766 name="/usr/bin/evince-previewer"
[ 11.497233] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.497273] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.499206] type=1505 audit(1281819451.681:11): operation="profile_load" pid=766 name="/usr/bin/evince-thumbnailer"
[ 11.516053] tuner-simple 0-0061: creating new instance
[ 11.516058] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 11.552167] saa7134[0]: registered device video0 [v4l2]
[ 11.552204] saa7134[0]: registered device vbi0
[ 11.552239] saa7134[0]: registered device radio0
[ 11.593224] [TTM] Zone kernel: Available graphics memory: 443536 kiB.
[ 11.593229] [TTM] Zone highmem: Available graphics memory: 513140 kiB.
[ 11.593242] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[ 11.632112] saa7134 ALSA driver for DMA sound loaded
[ 11.632130] IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 11.632155] saa7134[0]/alsa: saa7134[0] at 0xd0010000 irq 17 registered as card -2
[ 11.667907] dvb_init() allocating 1 frontend
[ 11.754282] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 11.803000] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 11.818767] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 11.819797] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 11.819801] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 11.819804] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 11.819807] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 11.819811] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 11.821054] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 11.873282] tuner-simple 0-0061: attaching existing instance
[ 11.873289] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 11.873294] DVB: registering new adapter (saa7134[0])
[ 11.873299] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 11.920047] tda1004x: setting up plls for 53MHz sampling clock
[ 12.104136] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo f4f4aa00
[ 12.104332] fb0: nouveaufb frame buffer device
[ 12.104336] registered panic notifier
[ 12.104343] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 12.110811] vga16fb: initializing
[ 12.110818] vga16fb: mapped to 0xc00a0000
[ 12.110824] vga16fb: not registering due to another framebuffer present
[ 12.143199] [drm] nouveau 0000:01:00.0: 0xC1FA: parsing output script 1
[ 12.143213] [drm] nouveau 0000:01:00.0: 0xC208: parsing output script 2
[ 12.143253] [drm] nouveau 0000:01:00.0: 0xBEE6: parsing clock script 0
[ 12.143544] [drm] nouveau 0000:01:00.0: 0xB7F0: parsing clock script 1
[ 12.151182] Console: switching to colour frame buffer device 180x56
[ 12.363440] zc3xx: probe 2wr ov vga 0x0000
[ 12.407440] zc3xx: probe sensor -> 0011
[ 12.407444] zc3xx: Find Sensor HV7131R(c)
[ 12.411542] gspca: probe ok
[ 12.411701] gspca: probing 046d:08da
[ 12.411717] STV06xx: Probing for a stv06xx device
[ 12.411720] gspca: probing 046d:08da
[ 12.411733] gspca: probing 046d:08da
[ 12.411767] usbcore: registered new interface driver zc3xx
[ 12.411771] zc3xx: registered
[ 12.412135] STV06xx: Probing for a stv06xx device
[ 12.412139] gspca: probing 046d:08da
[ 12.412166] usbcore: registered new interface driver STV06xx
[ 12.412171] STV06xx: registered
[ 12.545367] usbcore: registered new interface driver snd-usb-audio
[ 13.920011] tda1004x: found firmware revision 29 -- ok
[ 14.697529] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 14.708726] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 16.620074] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 22.288011] wlan0: no IPv6 routers present
[ 42.095077] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 42.096651] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 66.828149] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 106.832049] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 166.840055] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 246.846790] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 296.134061] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 301.239250] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 346.836060] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 466.856089] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 524.360518] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
[ 524.540019] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 525.156495] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 525.167744] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 588.173109] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 588.173324] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 706.836057] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 746.836056] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505
[ 806.831387] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 505

Thanks for help

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
olimag
Solved:
Last query:
Last reply:
Revision history for this message
marcus aurelius (adbiz) said : 		#1

Translation:

From time to time, ubuntu does not boot correctly.

Firstly, it does not detect the sound card.

Secondly, the filesystem does not mount without going through sudo. e.g. It wouldn't mount the CD-rom

Lastly, have to go invoke sudo to stop the system

After rebooting once or twice, the machine works correctly.

Revision history for this message
marcobra (Marco Braida) (marcobra) said : 		#2

Before to go into the deep (guessing you have downloaded the iso image)

do you have verified the md5sum of the iso image file you have used to burn and to install Ubuntu...?

Please be sure BEFORE to burn an install cd from an downloaded iso image
to check the md5sum

https://help.ubuntu.com/community/HowToMD5SUM

of the iso and compare it with the master Ubuntu site.

http://releases.ubuntu.com/10.04/

Revision history for this message
olimag (olmagron) said : 		#3

I download the iso from ubuntu site.

I do a check and it's OK

olicrimag@maison:~/Téléchargements$ md5sum -c MD5SUMS
md5sum: ubuntu-10.04-alternate-amd64.iso: Aucun fichier ou dossier de ce type
ubuntu-10.04-alternate-amd64.iso : ÉCHEC d'ouverture ou de lecture.
md5sum: ubuntu-10.04-alternate-i386.iso: Aucun fichier ou dossier de ce type
ubuntu-10.04-alternate-i386.iso : ÉCHEC d'ouverture ou de lecture.
md5sum: ubuntu-10.04-desktop-amd64.iso: Aucun fichier ou dossier de ce type
ubuntu-10.04-desktop-amd64.iso : ÉCHEC d'ouverture ou de lecture.
ubuntu-10.04-desktop-i386.iso: OK

Revision history for this message
marcobra (Marco Braida) (marcobra) said : 		#4

Please be sure your system is fully updated/upgraded open a terminal and type *** :

sudo apt-get update
sudo apt-get dist-upgrade

and to reboot

sudo reboot

*** the system ask you for a password please give your user password,
you will not see any password chars back to the screen, so type and then press enter.

Revision history for this message
olimag (olmagron) said : 		#5

OK
After reboot my system it's OK

But then power off and I push power button, my system it's no OK

I resume :

On the first boot, my sytem not OK

After reboot, it's OK.

Now, after I do :
sudo apt-get update
sudo apt-get dist-upgrade

and to reboot

sudo reboot

It's ok

I do power off
Power On,

It's not OK

Revision history for this message
olimag (olmagron) said : 		#6

Then i put a CD, it's say Impossible to mount CD not authorized

Like my profil it's no OK

Revision history for this message
marcobra (Marco Braida) (marcobra) said : 		#7

Please also check if your user have all permissions
please open the menu System→Administration→User and groups
and check the permissions of your user please give all permissions using the
"Advanced settings" go to "Users Priviledges" and set all permissions

Revision history for this message
olimag (olmagron) said : 		#8

My user have all permissions

Revision history for this message
Launchpad Janitor (janitor) said : 		#9

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
olimag (olmagron) said : 		#10

I have always this problme, the first boot is always KO, the second is always OK

I have remove my wifi card, but the problem isn't solve.

Thanks for you help

Revision history for this message
olimag (olmagron) said : 		#11

Hello,

After lot of search, I see that this error :
[ 11.208128] i2c i2c-0: Invalid 7-bit address 0x7a
[ 11.232088] saa7134[0] Board has DVB-T
[ 11.232093] saa7134[0] Tuner type is 63

I remove this card (I never use it) and all it's OK

regards