no such device
"No such device" when trying to boot from grub. When 200gb drive is #1in BIOS. Change to 40gb drive as #1 boots ok. Also if 200gb drive is set to #1 and try boot from grub i get "no such device" for both 200 gb and 40gb drives. 40gb drive only boots if it is #1 drive inBIOS. There is a long line of letters and numbers after the "no such device" that change with 200gb and 40gb drives.
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Hello!
Please provide information using terminal commands from this thread: https:/
Revision history for this message
|
#2 |
Can you do a "sudo fdisk -l" and "grub --version" ?
When you switch disk on BIOS, for old grub you have to update the file /boot/grub/
Revision history for this message
|
#3 |
--- On Mon, 4/26/10, HX_unbanned <email address hidden> wrote:
From: HX_unbanned <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 1:10 AM
Your question #108407 on Ubuntu changed:
https:/
Status: Open => Needs information
HX_unbanned requested for more information:
Hello!
Please provide information using terminal commands from this thread:
https:/
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
"no such device" at bootup from grub. I am new to the workings of
Ubuntu and at times the answers assume that we know more about the
system then we do. I have been having problems with dual boot from
Ubuntu. For some reason the system never shows my two sata drives in
grub. If i use the live cd they do not show up there. One has two Xp
pro systems and the other has Fedora 12 OS and it will not bootup. The
other two drives have Ubuntu on them. The 40gb drive had older version
on it that was updated to 9.10 and is the one i am using now. The 200gb
drive has 9.10 on it. I was able boot from grub on both drives for a
short time then the no such device came up. The only way i can use the
40gb drive is to have it the first drive in BIOS. If the 200gb drive is
first the grub that comes up gives me the choice of the 40gb and 200gb
drive but i get the no such device bootup. At no time has the two Sata
drives shown up in grub to boot from.
Revision history for this message
|
#4 |
--- On Mon, 4/26/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 1:01 PM
Your question #108407 on Ubuntu changed:
https:/
delance requested for more information:
Can you do a "sudo fdisk -l" and "grub --version" ?
When you switch disk on BIOS, for old grub you have to update the file /boot/grub/
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
ron@ron-desktop:~$ sudo fdisk -l
[sudo] password for ron:
Disk /dev/sda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x140f140f
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4787 38451546 83 Linux
/dev/sda2 4788 4998 1694857+ 5 Extended
/dev/sda5 4788 4998 1694826 82 Linux swap / Solaris
Disk /dev/sdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xdad0dad0
Device Boot Start End Blocks Id System
/dev/sdb1 1 23330 187398193+ 83 Linux
/dev/sdb2 23331 24321 7960207+ 5 Extended
/dev/sdb5 23331 24321 7960176 82 Linux swap / Solaris
ron@ron-desktop:~$ grub --version
grub (GNU GRUB 0.97)
Revision history for this message
|
#5 |
--- On Mon, 4/26/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 1:01 PM
Your question #108407 on Ubuntu changed:
https:/
delance requested for more information:
Can you do a "sudo fdisk -l" and "grub --version" ?
When you switch disk on BIOS, for old grub you have to update the file /boot/grub/
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
I am new to the workings of
Ubuntu and at times the answers assume that we know more about the
system then we do. I have been having problems with dual boot from
Ubuntu. For some reason the system never shows my two sata drives in
grub. If i use the live cd they do not show up there. One has two Xp
pro systems and the other has Fedora 12 OS and it will not bootup. The
other two drives have Ubuntu on them. The 40gb drive had older version
on it that was updated to 9.10 and is the one i am using now. The 200gb
drive has 9.10 on it. I was able boot from grub on both drives for a
short time then the no such device came up. The only way i can use the
40gb drive is to have it the first drive in BIOS. If the 200gb drive is
first the grub that comes up gives me the choice of the 40gb and 200gb
drive but i get the no such device bootup. At no time has the two Sata
drives shown up in grub to boot from. I think others would have given up by now but i think i'm to stubborn :). But i'm learning more about the system all the time. I have been working with computers for years. Way before windows every thing was in dos.
Revision history for this message
|
#6 |
--- On Mon, 4/26/10, Ronald <email address hidden> wrote:
From: Ronald <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 1:27 PM
Your question #108407 on Ubuntu changed:
https:/
You gave more information on the question:
--- On Mon, 4/26/10, delance <email address hidden>
wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 1:01 PM
Your question #108407 on Ubuntu changed:
https:/
delance requested for more information:
Can you do a "sudo fdisk -l" and "grub --version" ?
When you switch disk on BIOS, for old grub you have to update the file /boot/grub/
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
I am new to the workings of
Ubuntu and at times the answers assume that we know more about the
system then we do. I have been having problems with dual boot from
Ubuntu. For some reason the system never shows my two sata drives in
grub. If i use the live cd they do not show up there. One has two Xp
pro systems and the other has Fedora 12 OS and it will not bootup. The
other two drives have Ubuntu on them. The 40gb drive had older version
on it that was updated to 9.10 and is the one i am using now. The 200gb
drive has 9.10 on it. I was able boot from grub on both drives for a
short time then the no such device came up. The only way i can use the
40gb drive is to have it the first drive in BIOS. If the 200gb drive is
first the grub that comes up gives me the choice of the 40gb and 200gb
drive but i get the no such device bootup. At no time has the two Sata
drives shown up in grub to boot from. I think others would have given up by now but i think i'm to stubborn :). But i'm learning more about the system all the time. I have been working with computers for years. Way before windows every thing was in dos.
You received this question notification because you are a direct
subscriber of the question.
bash: /boot/grub/
ron@ron-desktop:~$
Revision history for this message
|
#7 |
Could you answer via Launchpad instead of producing tons of posts ?
It becomes unreadable.
Summary:
grub (GNU GRUB 0.97) i.e. old version of Grub
Disk /dev/sda: 41.1 GB
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4787 38451546 83 Linux
/dev/sda2 4788 4998 1694857+ 5 Extended
/dev/sda5 4788 4998 1694826 82 Linux swap / Solaris
Disk /dev/sdb: 200.0 GB
Device Boot Start End Blocks Id System
/dev/sdb1 1 23330 187398193+ 83 Linux
/dev/sdb2 23331 24321 7960207+ 5 Extended
/dev/sdb5 23331 24321 7960176 82 Linux swap / Solaris
Following previous configuration, you are supposed to boot on /dev/sda1 which must contains:
/boot/
1) Now, can you boot with this configuration ?
2) What do you want to do (boot on 200GB disk, have a grub menu to choose boot between 40GB and 200GB disk) ?
3) You have two swap partitions, one of 1.7 GB, second one of 8GB. I presume first one is useless.
N.B. I will be back in two hours.
Revision history for this message
|
#8 |
The 40gb drive is what i'm using at this time and it is first in BIOS. Would like to have menu to boot from 40 or 200gb drive. I have a new question also to add to problem. I also have two 500gb sata drives in system that never show up to install Ubuntu onto. I called the MB manufacture and the tech. said that pci=nomsi had to be added to OS to let it see my two sata drives. At some point was to install Ubuntu on one and the other has Fedora 12 on it but it will not boot. If i can get those two drives to show up in the grub menu that may help.
--- On Mon, 4/26/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Monday, April 26, 2010, 2:05 PM
Your question #108407 on Ubuntu changed:
https:/
Status: Open => Needs information
delance requested for more information:
Could you answer via Launchpad instead of producing tons of posts ?
It becomes unreadable.
Summary:
grub (GNU GRUB 0.97) i.e. old version of Grub
Disk /dev/sda: 41.1 GB
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4787 38451546 83 Linux
/dev/sda2 4788 4998 1694857+ 5 Extended
/dev/sda5 4788 4998 1694826 82 Linux swap / Solaris
Disk /dev/sdb: 200.0 GB
Device Boot Start End Blocks Id System
/dev/sdb1 1 23330 187398193+ 83 Linux
/dev/sdb2 23331 24321 7960207+ 5 Extended
/dev/sdb5 23331 24321 7960176 82 Linux swap / Solaris
Following previous configuration, you are supposed to boot on /dev/sda1 which must contains:
/boot/
1) Now, can you boot with this configuration ?
2) What do you want to do (boot on 200GB disk, have a grub menu to choose boot between 40GB and 200GB disk) ?
3) You have two swap partitions, one of 1.7 GB, second one of 8GB. I presume first one is useless.
N.B. I will be back in two hours.
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
Revision history for this message
|
#9 |
Please, if you reply by mail, remove previous message!
In /boot/grub/menu.lst in "1st partition 40GB disk", i.e. sda1, you should have something like:
title Ubuntu 9.10, kernel 2.6.31-20-generic
uuid ef3449fc-
kernel /boot/vmlinuz-
initrd /boot/initrd.
quiet
1) 2.6.31-20 is kernel version. You have to identify the /boot/vmlinuz-
2) uuid is the partition identifier of sda1. With GParted, which is on LiveCD (or you can install via Synaptic), you must identify the UUID of partition SDB1
3) Do a copy/paste of the bloc of text in menu.lst.
-) Do a backup of menu.lst (Allways to do a BACKUP)
a) Then replace the three occurences of kernel version by sdb1's one.
b) Replace the two occurences of UUID by sdb1's one.
c) Reboot
You should have a menu with both partitions.
-------
For the two 500GB, I presume it is another computer. Or there are on a PCI card with SATA controler ?
In first case, please open a new question (you can send me the link to this one with a mail, by clicking on my name).
In second case, I have to look if Grub knows how to manage disk on a PCI card.
Can you clarify ?
-------
Please, if you reply by mail, remove previous message!
Revision history for this message
|
#10 |
This is what comes up for menu.lst. ron@ron-desktop:~$ /boot/grub/menu.lst
bash: /boot/grub/
The two sata drives are in the same computer. There are 4 total drives.
Revision history for this message
|
#11 |
The two sata drives are not on a pci card the other two drives. The motherboard is newer and only had one plug to MB for the two older drives. I use MB connection for my two DVD drives. And i use the pci card for the two ata hard drives. :
Revision history for this message
|
#12 |
1) menu.lst
I'm surprised. You should have /boot/grub/menu.lst if you have Grub.
Can you type "ll /boot/grub/" and "ll /boot" ?
2) hardware configuration
Sorry, English is not my native language. And don't know what is a MB connection.
Configuration is:
two 500GB SATA disks connected to motherboard
one 40GB and one 200GB PATA disk connected to a PCI card
Am I right ?
I'll be back this evening late (22h English time).
Revision history for this message
|
#13 |
When type ll /boot/grub/ or ll/boot it comes up no command found.
Sorry MB is motherboard. Configuration is:
two 500GB SATA disks connected to motherboard
one 40GB and one 200GB PATA disk connected to a PCI card
The only drive i can boot from is the 40gb and it is not grub2. It is the one i'm using to e-mail you. When i built this system i was going to install 9.10 on one of the 500gb drives but Ubuntu did not show those drives to install too. Any time i try to install to a drive the 40gb and 200gb are the only ones shown in partition list. I did notice that when i turn computer on that just before BIOS comes up the screen shows the 40gb drive as 0 and 200gb drive as 1. It never changes even if i change boot order in BIOS. I keep thinking it is a BIOS problem with sata drives. All 4 drives show up in BIOS. If i change to one of the sata drives to boot first it will go to XP pro that is on them. Ubuntu does not see them. The motherboard tech. said to add "pci-nomsi" to kernel line before "quiet splash". I do want to thank you for your time.
Revision history for this message
|
#14 |
Sorry, replace "ll" commands by "ls -l /boot/grub/" and "ls -l /boot".
Can you do use GParted (from LiveCD ou you can install from Synaptic) to check if it sees the four disks, and can you provide the partitions for both 500GB disks? BE CAREFULL: don't play with GParted command except if you know what you do. It's powerfull...and dangerous.
I'll have a look tomorrow morning.
Revision history for this message
|
#15 |
ron@ron-desktop:~$ ls -l /boot/grub/
total 2724
-rw-r--r-- 1 root root 8320 2010-04-18 15:52 915resolution.mod
-rw-r--r-- 1 root root 10632 2010-04-18 15:52 acpi.mod
-rw-r--r-- 1 root root 4684 2010-04-18 15:52 affs.mod
-rw-r--r-- 1 root root 5144 2010-04-18 15:52 afs_be.mod
-rw-r--r-- 1 root root 4916 2010-04-18 15:52 afs.mod
-rw-r--r-- 1 root root 1136 2010-04-18 15:52 aout.mod
-rw-r--r-- 1 root root 7952 2010-04-18 15:52 ata.mod
-rw-r--r-- 1 root root 2352 2010-04-18 15:52 ata_pthru.mod
-rw-r--r-- 1 root root 2324 2010-04-18 15:52 at_keyboard.mod
-rw-r--r-- 1 root root 5036 2010-04-18 15:52 befs_be.mod
-rw-r--r-- 1 root root 4808 2010-04-18 15:52 befs.mod
-rw-r--r-- 1 root root 4264 2010-04-18 15:52 biosdisk.mod
-rw-r--r-- 1 root root 2528 2010-04-18 15:52 bitmap.mod
-rw-r--r-- 1 root root 2116 2010-04-18 15:52 blocklist.mod
-rw-r--r-- 1 root root 512 2010-04-18 15:52 boot.img
-rw-r--r-- 1 root root 2652 2010-04-18 15:52 boot.mod
-rw-r--r-- 1 root root 19384 2010-04-18 15:52 bsd.mod
-rw-r--r-- 1 root root 2048 2010-04-18 15:52 bufio.mod
-rw-r--r-- 1 root root 2036 2010-04-18 15:52 cat.mod
-rw-r--r-- 1 root root 512 2010-04-18 15:52 cdboot.img
-rw-r--r-- 1 root root 2420 2010-04-18 15:52 chain.mod
-rw-r--r-- 1 root root 2212 2010-04-18 15:52 cmp.mod
-rw-r--r-- 1 root root 1558 2010-04-18 15:52 command.lst
-rw-r--r-- 1 root root 1904 2010-04-18 15:52 configfile.mod
-rw-r--r-- 1 root root 25105 2010-04-18 15:52 core.img
-rw-r--r-- 1 root root 2872 2010-04-18 15:52 cpio.mod
-rw-r--r-- 1 root root 1660 2010-04-18 15:52 cpuid.mod
-rw-r--r-- 1 root root 1824 2010-04-18 15:52 crc.mod
-rw-r--r-- 1 root root 1912 2010-04-18 15:52 datehook.mod
-rw-r--r-- 1 root root 2360 2010-04-18 15:52 date.mod
-rw-r--r-- 1 root root 1333 2010-04-18 15:52 datetime.mod
-rw-r--r-- 1 root root 191 2010-04-27 12:57 default
-rw-r--r-- 1 root root 30 2010-04-18 14:40 device.map
-rw-r--r-- 1 root root 512 2010-04-18 15:52 diskboot.img
-rw-r--r-- 1 root root 1932 2010-04-18 15:52 dm_nv.mod
-rw-r--r-- 1 root root 5620 2010-04-18 15:52 drivemap.mod
-rw-r--r-- 1 root root 2008 2010-04-18 15:52 echo.mod
-rw-r--r-- 1 root root 6436 2010-04-18 15:52 efiemu32.o
-rw-r--r-- 1 root root 11003 2010-04-18 15:52 efiemu64.o
-rw-r--r-- 1 root root 25024 2010-04-18 15:52 efiemu.mod
-rw-r--r-- 1 root root 4476 2010-04-18 15:52 elf.mod
-rw-r--r-- 1 root root 5544 2010-04-18 15:52 ext2.mod
-rw-r--r-- 1 root root 3916 2010-04-18 15:52 extcmd.mod
-rw-r--r-- 1 root root 5812 2010-04-18 15:52 fat.mod
-rw-r--r-- 1 root root 7296 2010-04-18 15:52 font.mod
-rw-r--r-- 1 root root 2284 2010-04-18 15:52 fs_file.mod
-rw-r--r-- 1 root root 2852 2010-04-18 15:52 fshelp.mod
-rw-r--r-- 1 root root 121 2010-04-18 15:52 fs.lst
-rw-r--r-- 1 root root 2220 2010-04-18 15:52 fs_uuid.mod
-rw-r--r-- 1 root root 8624 2010-04-18 15:52 gfxterm.mod
-rw-r--r-- 1 root root 3816 2010-04-18 15:52 gptsync.mod
-r--r--r-- 1 root root 3209 2010-04-18 15:53 grub.cfg
-rw-r--r-- 1 root root 1024 2010-04-27 14:44 grubenv
-rw-r--r-- 1 root root 7816 2010-04-18 15:52 gzio.mod
-rw-r--r-- 1 root root 1552 2010-04-18 15:52 halt.mod
-rw-r--r-- 1 root root 272 2010-04-18 15:52 handler.lst
-rw-r--r-- 1 root root 2144 2010-04-18 15:52 handler.mod
-rw-r--r-- 1 root root 7400 2010-04-18 15:52 hdparm.mod
-rw-r--r-- 1 root root 1308 2010-04-18 15:52 hello.mod
-rw-r--r-- 1 root root 2200 2010-04-18 15:52 help.mod
-rw-r--r-- 1 root root 3196 2010-04-18 15:52 hexdump.mod
-rw-r--r-- 1 root root 5996 2010-04-18 15:52 hfs.mod
-rw-r--r-- 1 root root 5876 2010-04-18 15:52 hfsplus.mod
-rw-r--r-- 1 root root 6080 2010-04-18 15:52 iso9660.mod
-rw-r--r-- 1 root root 5676 2010-04-18 15:52 jfs.mod
-rw-r--r-- 1 root root 5988 2010-04-18 15:52 jpeg.mod
-rw-r--r-- 1 root root 31004 2010-04-18 15:52 kernel.img
-rw-r--r-- 1 root root 2092 2010-04-18 15:52 keystatus.mod
-rw-r--r-- 1 root root 4952 2010-04-18 15:52 linux16.mod
-rw-r--r-- 1 root root 8716 2010-04-18 15:52 linux.mod
-rw-r--r-- 1 root root 1024 2010-04-18 15:52 lnxboot.img
-rw-r--r-- 1 root root 5664 2010-04-18 15:52 loadenv.mod
-rw-r--r-- 1 root root 3172 2010-04-18 15:52 loopback.mod
-rw-r--r-- 1 root root 1388 2010-04-18 15:52 lsmmap.mod
-rw-r--r-- 1 root root 4196 2010-04-18 15:52 ls.mod
-rw-r--r-- 1 root root 4272 2010-04-18 15:52 lspci.mod
-rw-r--r-- 1 root root 5580 2010-04-18 15:52 lvm.mod
-rw-r--r-- 1 root root 1856 2010-04-18 15:52 mdraid.mod
-rw-r--r-- 1 root root 2176 2010-04-18 15:52 memdisk.mod
-rw-r--r-- 1 root root 2272 2010-04-18 15:52 memrw.mod
-rw-r--r-- 1 root root 4656 2010-04-27 13:05 menu.lst
-rw-r--r-- 1 root root 4656 2010-04-27 13:05 menu.lst~
-rw-r--r-- 1 root root 4116 2010-04-18 15:52 minicmd.mod
-rw-r--r-- 1 root root 4456 2010-04-18 15:52 minix.mod
-rw-r--r-- 1 root root 8656 2010-04-18 15:52 mmap.mod
-rw-r--r-- 1 root root 1657 2010-04-18 15:52 moddep.lst
-rw-r--r-- 1 root root 2468 2010-04-18 15:52 msdospart.mod
-rw-r--r-- 1 root root 15112 2010-04-18 15:52 multiboot.mod
-rw-r--r-- 1 root root 34764 2010-04-18 15:52 normal.mod
-rw-r--r-- 1 root root 3352 2010-04-18 15:52 ntfscomp.mod
-rw-r--r-- 1 root root 8584 2010-04-18 15:52 ntfs.mod
-rw-r--r-- 1 root root 4576 2010-04-18 15:52 ohci.mod
-rw-r--r-- 1 root root 2196 2010-04-18 15:52 part_acorn.mod
-rw-r--r-- 1 root root 2400 2010-04-18 15:52 part_amiga.mod
-rw-r--r-- 1 root root 2776 2010-04-18 15:52 part_apple.mod
-rw-r--r-- 1 root root 2840 2010-04-18 15:52 part_gpt.mod
-rw-r--r-- 1 root root 62 2010-04-18 15:52 partmap.lst
-rw-r--r-- 1 root root 3552 2010-04-18 15:52 part_msdos.mod
-rw-r--r-- 1 root root 2376 2010-04-18 15:52 part_sun.mod
-rw-r--r-- 1 root root 22 2010-04-18 15:52 parttool.lst
-rw-r--r-- 1 root root 4608 2010-04-18 15:52 parttool.mod
-rw-r--r-- 1 root root 2052 2010-04-18 15:52 password.mod
-rw-r--r-- 1 root root 928 2010-04-18 15:52 pci.mod
-rw-r--r-- 1 root root 2144 2010-04-18 15:52 play.mod
-rw-r--r-- 1 root root 6580 2010-04-18 15:52 png.mod
-rw-r--r-- 1 root root 2752 2010-04-18 15:52 probe.mod
-rw-r--r-- 1 root root 1024 2010-04-18 15:52 pxeboot.img
-rw-r--r-- 1 root root 2512 2010-04-18 15:52 pxecmd.mod
-rw-r--r-- 1 root root 3620 2010-04-18 15:52 pxe.mod
-rw-r--r-- 1 root root 1472 2010-04-18 15:52 raid5rec.mod
-rw-r--r-- 1 root root 2920 2010-04-18 15:52 raid6rec.mod
-rw-r--r-- 1 root root 5960 2010-04-18 15:52 raid.mod
-rw-r--r-- 1 root root 1632 2010-04-18 15:52 read.mod
-rw-r--r-- 1 root root 1212 2010-04-18 15:52 reboot.mod
-rw-r--r-- 1 root root 9948 2010-04-18 15:52 reiserfs.mod
-rw-r--r-- 1 root root 3340 2010-04-18 15:52 scsi.mod
-rw-r--r-- 1 root root 3604 2010-04-18 15:52 search.mod
-rw-r--r-- 1 root root 5692 2010-04-18 15:52 serial.mod
-rw-r--r-- 1 root root 778 2010-04-18 15:52 setjmp.mod
-rw-r--r-- 1 root root 4228 2010-04-18 15:52 sfs.mod
-rw-r--r-- 1 root root 12132 2010-04-18 15:52 sh.mod
-rw-r--r-- 1 root root 2296 2010-04-18 15:52 sleep.mod
-rw-r--r-- 1 root root 2904 2010-04-18 15:52 tar.mod
-rw-r--r-- 1 root root 9624 2010-04-18 15:52 terminfo.mod
-rw-r--r-- 1 root root 5248 2010-04-18 15:52 test.mod
-rw-r--r-- 1 root root 2976 2010-04-18 15:52 tga.mod
-rw-r--r-- 1 root root 1356 2010-04-18 15:52 true.mod
-rw-r--r-- 1 root root 5156 2010-04-18 15:52 udf.mod
-rw-r--r-- 1 root root 4796 2010-04-18 15:52 ufs1.mod
-rw-r--r-- 1 root root 5116 2010-04-18 15:52 ufs2.mod
-rw-r--r-- 1 root root 4972 2010-04-18 15:52 uhci.mod
-rw-r--r-- 1 root root 1716019 2010-04-18 15:52 unicode.pf2
-rw-r--r-- 1 root root 3356 2010-04-18 15:52 usb_keyboard.mod
-rw-r--r-- 1 root root 4268 2010-04-18 15:52 usb.mod
-rw-r--r-- 1 root root 3876 2010-04-18 15:52 usbms.mod
-rw-r--r-- 1 root root 3052 2010-04-18 15:52 usbtest.mod
-rw-r--r-- 1 root root 2824 2010-04-18 15:52 vbeinfo.mod
-rw-r--r-- 1 root root 6236 2010-04-18 15:52 vbe.mod
-rw-r--r-- 1 root root 3136 2010-04-18 15:52 vbetest.mod
-rw-r--r-- 1 root root 3756 2010-04-18 15:52 vga.mod
-rw-r--r-- 1 root root 2780 2010-04-18 15:52 vga_text.mod
-rw-r--r-- 1 root root 16316 2010-04-18 15:52 video_fb.mod
-rw-r--r-- 1 root root 5352 2010-04-18 15:52 video.mod
-rw-r--r-- 1 root root 3912 2010-04-18 15:52 videotest.mod
-rw-r--r-- 1 root root 6168 2010-04-18 15:52 xfs.mod
-rw-r--r-- 1 root root 24792 2010-04-18 15:52 xnu.mod
-rw-r--r-- 1 root root 4312 2010-04-18 15:52 xnu_uuid.mod
-rw-r--r-- 1 root root 6416 2010-04-18 15:52 zfsinfo.mod
-rw-r--r-- 1 root root 24360 2010-04-18 15:52 zfs.mod
ron@ron-desktop:~$ ls -l /boot
total 14048
-rw-r--r-- 1 root root 629693 2010-03-12 03:51 abi-2.6.
-rw-r--r-- 1 root root 111417 2010-03-12 03:51 config-
drwxr-xr-x 2 root root 4096 2010-04-27 13:05 grub
-rw-r--r-- 1 root root 7912578 2010-04-27 12:18 initrd.
-rw-r--r-- 1 root root 128796 2009-10-23 12:11 memtest86+.bin
-rw-r--r-- 1 root root 1667668 2010-03-12 03:51 System.
-rw-r--r-- 1 root root 1200 2010-03-12 03:53 vmcoreinfo-
-rw-r--r-- 1 root root 3914176 2010-03-12 03:51 vmlinuz-
I got the four drives show up the places drop down box.
I used edit when the grub menu opened at boot up by adding "pci=nomsi" before "quiet splash" in the kernel. This is just temporary basis. To edit /etc/default/grub by adding gksu gedit in front of it. This is what happens when i try that.
ron@ron-desktop:~$ /etc/default/grub
bash: /etc/default/grub: Permission denied
ron@ron-desktop:~$ sudo /etc/default/grub
[sudo] password for ron:
sudo: /etc/default/grub: command not found
Also how do you make that change when trying to install Ubuntu9.10 to a different drive.
Also this is what came up when i checked grub version grub (GNU GRUB 0.97) It is not grub2
Revision history for this message
|
#16 |
What you have to edit is /boot/grub/
But before doing anything, can you send me this file at <email address hidden>.
I'm more optimistic for 200GB disk.
I need your investigation with GParted for the 500GB disks (but don't push the green button!).
Revision history for this message
|
#17 |
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_
## kopt_2_
# kopt=root=
## default grub root device
## e.g. groot=(hd0,0)
# groot=f029d9e9-
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative
## lockalternative
# lockalternative
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=
# altoptions=
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaulten
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
# ## End Default Options ##
title Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Chainload into GRUB 2
root f029d9e9-
kernel /boot/grub/core.img
title Ubuntu 9.10, memtest86+
uuid f029d9e9-
kernel /boot/memtest86
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_
## kopt_2_
# kopt=root=
## default grub root device
## e.g. groot=(hd0,0)
# groot=a93aef37-
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative
## lockalternative
# lockalternative
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=
# altoptions=
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaulten
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Chainload into GRUB 2
root a93aef37-
kernel /boot/grub/core.img
title Ubuntu 9.10, memtest86+
uuid a93aef37-
kernel /boot/memtest86
### END DEBIAN AUTOMAGIC KERNELS LIST
### END DEBIAN AUTOMAGIC KERNELS LIST
The First list is from the 200gb drive and the second list is from the 40gb drive
Revision history for this message
|
#18 |
In menu.lst of 40GB, add after :
title Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
the bloc:
title 200GB - Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title 200GB - Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
You should be able to boot on 200GB from 40GB.
-------
In menu.lst of 200 GB, add after :
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
the bloc :
title 40GB - Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title 40GB - Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
If you make 200GB disk bootable and first in BIOS setup, you could boot on 200GB, or on 200GB from 40GB.
-------
But now, what do you want of these two disks (500GB disk will be seen later).
Revision history for this message
|
#19 |
I made a change in my system since we talked last. I installed 10.04 on the 200gb drive and it will not boot. It always ends up back at the 40gb drive. When i boot from the 40gb drive now it lists 4 drives that i can mount. The 200gb drive has no menu.lst that shows up in boot. Could that be because it has 10.04 on it now. The bloc that you wanted me to add to the 40gb menu.lst looks like it is for the 200gb drive. The lines that the bloc was to go after is not on the 40gb drive but the 200gb drive and i did not make a change yet. This is the first line from the 40gb drive. title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
I don't know if you need change what i need to do or not. I will wait till i hear from you again. Did not want to make things worst
--- On Sun, 5/2/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Sunday, May 2, 2010, 4:14 PM
Your question #108407 on Ubuntu changed:
https:/
Status: Open => Answered
delance proposed the following answer:
In menu.lst of 40GB, add after :
title Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
the bloc:
title 200GB - Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title 200GB - Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
You should be able to boot on 200GB from 40GB.
-------
In menu.lst of 200 GB, add after :
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
the bloc :
title 40GB - Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title 40GB - Ubuntu 9.10, kernel 2.6.31-
uuid f029d9e9-
kernel /boot/vmlinuz-
initrd /boot/initrd.
If you make 200GB disk bootable and first in BIOS setup, you could boot on 200GB, or on 200GB from 40GB.
-------
But now, what do you want of these two disks (500GB disk will be seen
later).
--
If this answers your question, please go to the following page to let us
know that it is solved:
https:/
If you still need help, you can reply to this email or go to the
following page to enter your feedback:
https:/
You received this question notification because you are a direct
subscriber of the question.
Revision history for this message
|
#20 |
Please, stop to reply with previous message.
I work under launchpad, and the thread is unreadable.
If it continues, you will solve the problem by yourself.
-------
Touch anything. I don't know what is your configuration.
Type
sudo fdisk -l
sudo parted -l
ls -l /dev/disk/by-uuid/
for each disk, provide me again the contents of file /boot/grub/menu.lst AFTER line "## ## End Default Options ##".
for each disk, check existence of file /usr/sbin/grub (for the disk not used for boot, it should be preceded by something like /media/diskXXGB).
Please insert separator between each piece of data, or post each piece of data in a distinct message.
If I can't read, I can't understand (and can't help).
Revision history for this message
|
#21 |
_______
ron@ron-desktop:~$ /boot/grub/menu.lst
bash: /boot/grub/
ron@ron-desktop:~$ sudo /boot/grub/menu.lst
[sudo] password for ron:
sudo: /boot/grub/
If i go to Places-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
title Chainload into GRUB 2
root a93aef37-
kernel /boot/grub/core.img
title Ubuntu 9.10, memtest86+
uuid a93aef37-
kernel /boot/memtest86
_______
_______
ron@ron-desktop:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0b1d0b1c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 31871 256003776 7 HPFS/NTFS
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x586e586e
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 38245 307202931 7 HPFS/NTFS
/dev/sdb2 38246 60800 181173037+ f W95 Ext'd (LBA)
/dev/sdb5 38246 60800 181173006 7 HPFS/NTFS
Disk /dev/sdc: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002276c
Device Boot Start End Blocks Id System
/dev/sdc1 1 23330 187395072 83 Linux
/dev/sdc2 23330 24322 7963649 5 Extended
/dev/sdc5 23330 24322 7963648 82 Linux swap / Solaris
Disk /dev/sdd: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x140f140f
Device Boot Start End Blocks Id System
/dev/sdd1 * 1 4787 38451546 83 Linux
/dev/sdd2 4788 4998 1694857+ 5 Extended
/dev/sdd5 4788 4998 1694826 82 Linux swap / Solaris
_______
ron@ron-desktop:~$ sudo parted -l
[sudo] password for ron:
Model: ATA WDC WD5001AALS-0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 262GB 262GB primary ntfs boot
Model: ATA Hitachi HDP72505 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 315GB 315GB primary ntfs boot
2 315GB 500GB 186GB extended lba
5 315GB 500GB 186GB logical ntfs
Model: ATA MAXTOR STM320082 (scsi)
Disk /dev/sdc: 200GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 192GB 192GB primary ext4
2 192GB 200GB 8155MB extended
5 192GB 200GB 8155MB logical linux-swap(v1)
Model: ATA Maxtor 6E040L0 (scsi)
Disk /dev/sdd: 41.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 39.4GB 39.4GB primary ext4 boot
2 39.4GB 41.1GB 1736MB extended
5 39.4GB 41.1GB 1736MB logical linux-swap(v1)
_______
ron@ron-desktop:~$ ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 0d9c3989-
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 265C5C635C5C3033 -> ../../sdb1
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 2CF90030F8FFF644 -> ../../sda1
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 39dfb629-
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 7A2CF9672CF91EB7 -> ../../sdb5
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 8e625ac8-
lrwxrwxrwx 1 root root 10 2010-05-03 16:07 a93aef37-
_______
Revision history for this message
|
#22 |
Too late for today evening!
I printed last post and I will analyze it tomorrow evening, before evening german lesson.
I will answer tomorrow evening at 22:00 UK time or wednesday evening.
Revision history for this message
|
#23 |
Are you interested by keeping Ubuntu 9.10 on 40GB or use it as a Data disk ?
Revision history for this message
|
#25 |
As I have solved issues for other users, I will have more time than planned.
The situation at Boot Sector is:
one windows Boot Sector for each 500GB
one Boot Sector Grub1 on 40GB disk
and none on 200GB, which is perfect!
In a first step, you could check you are able able to boot on both 500GB, and if it is not the case repair the MBR (Windows Boot Sector) with Windows DVD-ROM.
After, you must make 200GB first disk (in the BIOS or by changing wiring).
You need to reinstall 10.4 on 200GB.
200GB must appear as /dev/sda.
During installation, Ubuntu will install Boot Sector of Grub2 on 200GB, and, in theory, it will detect the three others Boot Sectors, and chain them.
There are supposed to appear in boot menu.
But in practice, it doesn't work for all users.
Revision history for this message
|
#26 |
Both 500gb drives boot to windows.
Reinstalled 10.04 to 200gb drive with it first in BIOS
At reboot it came up error: file not found
grub rescue>
Reboot with 40gb drive first in BIOS it came up
No such device 8eb625ac8-
grub rescue>
Revision history for this message
|
#27 |
Your problem seems very complex!
Will will stay with 40GB for the moment:
For your 40GB disk, in previous messages,
menu.lst a93aef37-
/dev/disk/by-uuid/ sdd a93aef37-
Grub from 40GB looks to search another disk than 40GB disk.
With LiveCD, mount 40GB, and check that in /media/
a93aef37-
Do also "sudo blkid" to check again UUID of disks.
If UUID in /media/
We need to fix 40GB issue before looking at 200GB issue.
Revision history for this message
|
#28 |
This is the first block of menu.lst. for 40gb drive
## ## End Default Options ##
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
_______
This what comes up for "sudo blkid"
ubuntu@ubuntu:~$ sudo blkid
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="db318bec-
/dev/sda5: UUID="0d9c3989-
/dev/sdb1: UUID="a93aef37-
/dev/sdb5: UUID="39dfb629-
_______
The line"/dev/sda1: UUID="db318bec-
Revision history for this message
|
#29 |
The UUID of the first text block of menu.lst match UUID of your second disk /dev/sdb1.
a93aef37-
a93aef37-
so it should work, which is not the case!
Can you look if you have this following UUID in menu.lst (for both 40GB and 200GB)?
8eb625ac8-
I understand nothing for the moment.
Revision history for this message
|
#30 |
The only UUID in 40gb drive menu.lst is a93aef37-
_______
There is no menu.lst in the 200gb drive. It has 10.04 on it and uses grub 2. Grub2 uses /boot/grub/grub.cfg in place of it.
_______
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
if loadfont /usr/share/
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
set locale_
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.
### BEGIN /etc/grub.
set menu_color_
set menu_color_
### END /etc/grub.
### BEGIN /etc/grub.
menuentry 'Ubuntu, with Linux 2.6.32-
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
linux /boot/vmlinuz-
initrd /boot/initrd.
}
menuentry 'Ubuntu, with Linux 2.6.32-
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
echo 'Loading Linux 2.6.32-
linux /boot/vmlinuz-
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.
}
### END /etc/grub.
### BEGIN /etc/grub.
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
linux16 /boot/memtest86
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set db318bec-
linux16 /boot/memtest86
}
### END /etc/grub.
### BEGIN /etc/grub.
menuentry "Ubuntu, Linux 2.6.31-
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a93aef37-
linux /boot/vmlinuz-
initrd /boot/initrd.
}
menuentry "Ubuntu, Linux 2.6.31-
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a93aef37-
linux /boot/vmlinuz-
initrd /boot/initrd.
}
menuentry "Ubuntu, Linux 2.6.31-
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a93aef37-
linux /boot/vmlinuz-
initrd /boot/initrd.
}
menuentry "Ubuntu, Linux 2.6.31-
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set a93aef37-
linux /boot/vmlinuz-
initrd /boot/initrd.
}
### END /etc/grub.
### BEGIN /etc/grub.
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.
Revision history for this message
|
#31 |
Reboot with 40gb drive first in BIOS it came up
No such device 8eb625ac8-
grub rescue>
040GB 1st part f029d9e9-
200GB 1st part a93aef37-
500GB disk 8eb625ac8-
ls -l /dev/disk/by-uuid/
2CF90030F8FFF644 -> ../../sda1 (disk 500GB) UUID Windows
265C5C635C5C3033 -> ../../sdb1 (disk 500GB) UUID Windows
7A2CF9672CF91EB7 -> ../../sdb5 (disk 500GB) UUID Windows
8e625ac8-
0d9c3989-
a93aef37-
39dfb629-
-------
I have an inconsistency between UUID provide by "ls -l /dev/disk/
Can you do:
sudo blkid && sudo parted -l && sudo find / -name menu.lst | xargs fgrep UUID
Perhaps I'll finish to understand where is the problem.
Revision history for this message
|
#32 |
sudo blkid && sudo parted -l && sudo find / -name menu.lst | xargs fgrep UUID
_______
ubuntu@ubuntu:~$ sudo blkid && sudo parted -l && sudo find / -name menu.lst | xargs fgrep UUID
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="db318bec-
/dev/sda5: UUID="0d9c3989-
/dev/sdb1: UUID="a93aef37-
/dev/sdb5: UUID="39dfb629-
Model: ATA MAXTOR STM320082 (scsi)
Disk /dev/sda: 200GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 192GB 192GB primary ext4 boot
2 192GB 200GB 8155MB extended
5 192GB 200GB 8155MB logical linux-swap(v1)
Model: ATA Maxtor 6E040L0 (scsi)
Disk /dev/sdb: 41.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 39.4GB 39.4GB primary ext4 boot
2 39.4GB 41.1GB 1736MB extended
5 39.4GB 41.1GB 1736MB logical linux-swap(v1)
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: /dev/sr0: unrecognised disk label
Revision history for this message
|
#33 |
(NB: it's a summary for myself)
UUID of both Ubuntu disks
/dev/sda1: UUID="db318bec-
/dev/sda5: UUID="0d9c3989-
/dev/sdb1: UUID="a93aef37-
/dev/sdb5: UUID="39dfb629-
Reboot with 40gb drive first in BIOS it came up
No such device 8eb625ac8-
grub rescue>
You should have an error in menu.lst of 41.1GB.
Can you post to <email address hidden> the file menu.lst in /FileSystem41.
(I prefer you send me an e-mail with this file because this "question" is becoming too big)
Revision history for this message
|
#34 |
Can you explain me (in a separate post) why you have such a configuration, and what is your goals ?
Perhaps there is a way to reach them with a simpler configuration.
Revision history for this message
|
#35 |
At first i was going to use one of the 500gb drives for Ubuntu and Windows. The other 500gb drive i was going to load Fedora 12 on it. The one 500gb drive already has Fedora on it but it would not boot up. It also has Windows on it. If i put the one with Windows on it it will boot to Windows. It has two Windows OS on it.The other has Windows and Fedora on it. But they don't show up in grub to boot from. The 40gb drive i was going to use in another computer.
--- On Wed, 5/12/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Wednesday, May 12, 2010, 1:17 PM
Your question #108407 on Ubuntu changed:
https:/
delance requested for more information:
Can you explain me (in a separate post) why you have such a configuration, and what is your goals ?
Perhaps there is a way to reach them with a simpler configuration.
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
Revision history for this message
|
#36 |
Please don't answer with previous message.
I presume that you do not use daily all these software distributions!
If you want simply to check them for evaluation, it could more easy to use virtual machines (like VirtualBox that I use daily).
You could have one virtual machine by distribution, and so avoid tricky multi-boot, with many XP, Ubuntu and Fedora systems.
It's what I use to help people in Ubuntu 9.10 or 10.04, and to use simultaneously for myself XP and Seven.
The only real limit is RAM, because each machine needs around 512MB of REAL memory (which means 5 machines on a 3.2GB computer). For IO or CPU, I see no real difference with a multi-boot software. It is sometimes a little more slowly (specially for XP, but I don't know why).
If you want to discover the "pleasure" of multi-boot, you can also do it on a virtual machine. It's how I debug for Launchpad users XP/Ubuntu multi-boot issues.
Trying to manage so many OSes is very ambitious!
Revision history for this message
|
#37 |
Menu.lst:
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
Error message:
Reboot with 40gb drive first in BIOS it came up
No such device 8eb625ac8-
grub rescue>
Sorry, I have any explanation. I don't see why grub try to access "8eb625ac8-
Revision history for this message
|
#38 |
I will check into VirtualBox thank you for your help. I appreciate it very much.
--- On Wed, 5/12/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Wednesday, May 12, 2010, 5:53 PM
Your question #108407 on Ubuntu changed:
https:/
Status: Open => Answered
delance proposed the following answer:
Please don't answer with previous message.
I presume that you do not use daily all these software distributions!
If you want simply to check them for evaluation, it could more easy to use virtual machines (like VirtualBox that I use daily).
You could have one virtual machine by distribution, and so avoid tricky multi-boot, with many XP, Ubuntu and Fedora systems.
It's what I use to help people in Ubuntu 9.10 or 10.04, and to use simultaneously for myself XP and Seven.
The only real limit is RAM, because each machine needs around 512MB of REAL memory (which means 5 machines on a 3.2GB computer). For IO or CPU, I see no real difference with a multi-boot software. It is sometimes a little more slowly (specially for XP, but I don't know why).
If you want to discover the "pleasure" of multi-boot, you can also do it on a virtual machine. It's how I debug for Launchpad users XP/Ubuntu multi-boot issues.
Trying to manage so many OSes is very ambitious!
--
If this answers your question, please go to the following page to let us
know that it is solved:
https:/
If you still need help, you can reply to this email or go to the
following page to enter your feedback:
https:/
You received this question notification because you are a direct
subscriber of the question.
Revision history for this message
|
#39 |
I'm not sure what device 8eb625ac8-
--- On Wed, 5/12/10, delance <email address hidden> wrote:
From: delance <email address hidden>
Subject: Re: [Question #108407]: no such device
To: <email address hidden>
Date: Wednesday, May 12, 2010, 5:55 PM
Your question #108407 on Ubuntu changed:
https:/
delance proposed the following answer:
Menu.lst:
title Ubuntu 9.10, kernel 2.6.31-
uuid a93aef37-
kernel /boot/vmlinuz-
initrd /boot/initrd.
Error message:
Reboot with 40gb drive first in BIOS it came up
No such device 8eb625ac8-
grub rescue>
Sorry, I have any explanation. I don't see why grub try to access
"8eb625ac8-
b14f-de66c904c16e".
--
If this answers your question, please go to the following page to let us
know that it is solved:
https:/
If you still need help, you can reply to this email or go to the
following page to enter your feedback:
https:/
You received this question notification because you are a direct
subscriber of the question.
Revision history for this message
|
#40 |
Hello, I will have some time tomorrow to follow your problem.
What is your status ?
Revision history for this message
|
#41 |
I reinstalled 10.04 onto the 200gb drive. When i was in the partition window i used advanced and used ext4 instead of ext3. And for some reason made the 40gb drive work. When i rebooted after install i got a grub menu. I could pick the 40gb or 200gb drive. When i pick the 200gb drive it comes up Busy Box. Booting with 40gb drive it works ok. When i click on -places-on the task bar it shows the other 4 hard drives listed. I have done differant things to get the 200gb drive to work but no luck.
Revision history for this message
|
#42 |
(NB: it's a summary for myself)
UUID of both Ubuntu disks
/dev/sda1: UUID="db318bec-
/dev/sda5: UUID="0d9c3989-
/dev/sdb1: UUID="a93aef37-
/dev/sdb5: UUID="39dfb629-
+ two 500GB disks with XP
-------
Perhaps now you don't have a Grub problem in 200GB, as you can access from it to 40GB disks, but a booting issue inside Lucid.
For 200GB, you should have two options, the first one is standard, the second one is "recovery".
Could you try this second option ?
And can you boot also on your two XP disks ?
Revision history for this message
|
#43 |
It looks like it is going to boot from the 200gb drive. I went into recovery mode. It started listing a long list of line and then went into BusyBox again. This time i typed in exit and it then it opened a recovery menu. I picked update grub loader and it ran. Then i picked repair broken packages. Then i picked normal boot. It asked for my login and password. It then booted into desktop of 200gb drive. I don't know why i picked the word exit to use but it put it into recovery menu. It still will not give me the option to boot from the drives with XP Pro on them.
Revision history for this message
|
#44 |
The thread became huge, so I have difficulties to retrieve data.
You have 4 disks, one 9.10, one 10.4 and two XPs.
Are you supposed to be able to boot on both XP disks ?
When you put bootable XP disk in first position in BIOS boot order, can you boot on it ?
Revision history for this message
|
#45 |
Both XP disks will boot if first in BIOS boot order. One of the sata drives has two XP Pro systems on it and they were both in the menu list of the 40gb drive when it had an older Ubuntu OS on it. Only had one sata drive at that time.
Revision history for this message
|
#46 |
In theory, you should be able to see these three "!!" XP boots, with 200GB/Ubuntu 10.4.
You should put 200GB disk at first in BIOS, boot on it and then:
sudo grub-install /dev/sda
But a configuration with Ubuntu 9.10, 10.04 and many XPs looks for me very complex.
I advise you strongly to explore virtual machines, like Virtual Box, to experiment such situation, and perhaps also to avoid it.
Can you help with this problem?
Provide an answer of your own, or ask Ronald for more information if necessary.