--- dbus-0.95.orig/debian/control +++ dbus-0.95/debian/control @@ -0,0 +1,98 @@ +Source: dbus +Section: devel +Priority: optional +Maintainer: Utopia Maintenance Team +Uploaders: Sjoerd Simons , Sebastian Dröge +Build-Depends: cdbs (>= 0.4.43), debhelper (>= 5.0.37.2), libexpat-dev, doxygen, docbook-utils, xmlto, libx11-dev +Standards-Version: 3.7.2 + +Package: dbus +Architecture: any +Depends: ${shlibs:Depends}, adduser, debianutils (>= 1.22.0), lsb-base (>= 3.1) +Conflicts: libdbus0, dbus-1, dbus-1-utils (<< 0.50-2), libdbus-1-1 +Replaces: libdbus0, dbus-1 +Description: simple interprocess messaging system + D-Bus is a message bus, used for sending messages between + applications. Conceptually, it fits somewhere in between raw sockets + and CORBA in terms of complexity. + . + D-Bus supports broadcast messages, asynchronous messages (thus + decreasing latency), authentication, and more. It is designed to be + low-overhead; messages are sent using a binary protocol, not using + XML. D-Bus also supports a method call mapping for its messages, but + it is not required; this makes using the system quite simple. + . + D-Bus is still under heavy development, but is expected to be widely + used. It comes with several interfaces, including GLib. See the + description of dbus-glib-1 for more information about those. + . + This package contains the D-Bus daemon; the client-side library can + be found in the libdbus-1-3 package, as it is no longer contained in + this package. + +Package: libdbus-1-3 +Architecture: any +Depends: ${shlibs:Depends} +Recommends: dbus +Section: libs +Conflicts: dbus (<< 0.60) +Description: simple interprocess messaging system + D-Bus is a message bus, used for sending messages between + applications. Conceptually, it fits somewhere in between raw sockets + and CORBA in terms of complexity. + . + D-Bus supports broadcast messages, asynchronous messages (thus + decreasing latency), authentication, and more. It is designed to be + low-overhead; messages are sent using a binary protocol, not using + XML. D-Bus also supports a method call mapping for its messages, but + it is not required; this makes using the system quite simple. + . + D-Bus is still under heavy development, but is expected to be widely + used. It comes with several interfaces, including GLib. See the + description of libdbus-glib-1-2 for more information about those. + . + The daemon can be found in the dbus package. + +Package: dbus-1-utils +Architecture: any +Section: utils +Depends: ${shlibs:Depends}, dbus +Description: simple interprocess messaging system (utilities) + D-Bus is a message bus, used for sending messages between + applications. Conceptually, it fits somewhere in between raw sockets + and CORBA in terms of complexity. + . + This package contains several D-Bus related utilities like + dbus-launch and dbus-send. + . + See the dbus description for more information about D-Bus in general. + +Package: dbus-1-doc +Section: doc +Architecture: all +Suggests: dbus-1-dev +Conflicts: libdbus0-doc +Replaces: libdbus0-doc +Description: simple interprocess messaging system (documentation) + D-Bus is a message bus, used for sending messages between applications. + Conceptually, it fits somewhere in between raw sockets and CORBA in + terms of complexity. + . + This package contains the API documentation for D-Bus, as well as + the protocol specification. + . + See the dbus description for more information about D-Bus in general. + +Package: libdbus-1-dev +Section: libdevel +Architecture: any +Depends: libdbus-1-3 (= ${Source-Version}), pkg-config +Conflicts: dbus-1-dev +Replaces: libdbus0-dev, dbus-1-dev +Description: simple interprocess messaging system (development headers) + D-Bus is a message bus, used for sending messages between applications. + Conceptually, it fits somewhere in between raw sockets and CORBA in + terms of complexity. + . + See the dbus description for more information about D-Bus in general. + --- dbus-0.95.orig/debian/dbus.default +++ dbus-0.95/debian/dbus.default @@ -0,0 +1,10 @@ +# This is a configuration file for /etc/init.d/dbus; it allows you to +# perform common modifications to the behavior of the dbus daemon +# startup without editing the init script (and thus getting prompted +# by dpkg on upgrades). We all love dpkg prompts. + +# Parameters to pass to dbus. +PARAMS="" + +# Whether or not to run the dbus system daemon; set to 0 to disable. +ENABLED=1 --- dbus-0.95.orig/debian/dbus.preinst +++ dbus-0.95/debian/dbus.preinst @@ -0,0 +1,28 @@ +#!/bin/sh + +set -e + +rm_conffile() { + CONFFILE="$1" + OLD_MD5SUM="$2" + if [ -e "$CONFFILE" ]; then + md5sum="`md5sum \"$CONFFILE\" | sed -e \"s/ .*//\"`" + if [ "$md5sum" != "$OLD_MD5SUM" ]; then + echo "Obsolete conffile $CONFFILE has been modified by you." + echo "Saving as $CONFFILE.dpkg-bak ..." + mv -f "$CONFFILE" "$CONFFILE".bak + else + echo "Removing obsolete conffile $CONFFILE ..." + rm -f "$CONFFILE" + fi + fi +} + +case "$1" in +install|upgrade) + if dpkg --compare-versions "$2" lt "0.50-2"; then + rm_conffile "/etc/X11/Xsession.d/75dbus-1-utils_dbus-launch" f16c15c4b018d37ca3ea2b6aba224439 + fi +esac + +#DEBHELPER# --- dbus-0.95.orig/debian/dbus.prerm +++ dbus-0.95/debian/dbus.prerm @@ -0,0 +1,8 @@ +#!/bin/sh -e + +# Do not restart dbus on upgrades, only stop if we remove the package +if [ "$1" = "upgrade" ]; then + exit 0 +fi + +#DEBHELPER# --- dbus-0.95.orig/debian/compat +++ dbus-0.95/debian/compat @@ -0,0 +1 @@ +5 --- dbus-0.95.orig/debian/libdbus-1-3.install +++ dbus-0.95/debian/libdbus-1-3.install @@ -0,0 +1 @@ +debian/tmp/usr/lib/libdbus-1*.so.* --- dbus-0.95.orig/debian/patches/00_dbus-quiesce-startup-errors.patch +++ dbus-0.95/debian/patches/00_dbus-quiesce-startup-errors.patch @@ -0,0 +1,23 @@ +--- dbus-0.20-virgin-patches/bus/config-parser.c 2003-10-14 21:30:21.000000000 +0100 ++++ dbus-0.20/bus/config-parser.c 2004-02-10 00:40:05.000000000 +0000 +@@ -1710,8 +1710,18 @@ + { + if (!include_file (parser, &full_path, TRUE, error)) + { +- _dbus_string_free (&full_path); +- goto failed; ++ /* Debian patch to skip malformed /etc/dbus-1/system.d entries */ ++ /* ++ * _dbus_string_free (&full_path); ++ * goto failed; ++ */ ++ if (dbus_error_is_set (error)) ++ { ++ _dbus_warn("\nEncountered error '%s' while parsing '%s'\n", ++ error->message, ++ _dbus_string_get_const_data(&full_path)); ++ dbus_error_free (error); ++ } + } + } + --- dbus-0.95.orig/debian/patches/80-dbus-change-at-console-policy.patch +++ dbus-0.95/debian/patches/80-dbus-change-at-console-policy.patch @@ -0,0 +1,170 @@ +diff -Naur dbus-0.94-old/config.h.in dbus-0.94/config.h.in +--- dbus-0.94-old/config.h.in 2006-10-14 19:28:17.000000000 +0200 ++++ dbus-0.94/config.h.in 2006-10-25 18:23:11.206059750 +0200 +@@ -36,6 +36,9 @@ + /* Support a verbose mode */ + #undef DBUS_ENABLE_VERBOSE_MODE + ++/* Application to provide the current foreground console */ ++#undef DBUS_FOREGROUND_CONSOLE_COMMAND ++ + /* Defined if gcov is enabled to force a rebuild due to config.h changing */ + #undef DBUS_GCOV_ENABLED + +diff -Naur dbus-0.94-old/configure.in dbus-0.94/configure.in +--- dbus-0.94-old/configure.in 2006-10-14 19:27:49.000000000 +0200 ++++ dbus-0.94/configure.in 2006-10-25 18:23:11.206059750 +0200 +@@ -1085,6 +1085,16 @@ + AC_SUBST(DBUS_CONSOLE_OWNER_FILE) + AC_DEFINE_UNQUOTED(DBUS_CONSOLE_OWNER_FILE, "$DBUS_CONSOLE_OWNER_FILE", [File to check for console ownerhip]) + ++#### Application to check for current console ++if ! test -z "$with_foreground_console_command"; then ++ DBUS_FOREGROUND_CONSOLE_COMMAND=$with_foreground_console_comand ++else ++ DBUS_FOREGROUND_CONSOLE_COMMAND=/usr/lib/dbus-1.0/dbus-foreground-console ++fi ++ ++AC_SUBST(DBUS_FOREGROUND_CONSOLE_COMMAND) ++AC_DEFINE_UNQUOTED(DBUS_FOREGROUND_CONSOLE_COMMAND, "$DBUS_FOREGROUND_CONSOLE_COMMAND", [Application to provide the current foreground console]) ++ + #### User to start the system bus as + if test -z "$with_dbus_user" ; then + DBUS_USER=messagebus +@@ -1222,6 +1232,7 @@ + Console auth dir: ${DBUS_CONSOLE_AUTH_DIR} + Console owner file: ${have_console_owner_file} + Console owner file path: ${DBUS_CONSOLE_OWNER_FILE} ++ Foreground console app: ${DBUS_FOREGROUND_CONSOLE_COMMAND} + System bus user: ${DBUS_USER} + Session bus services dir: ${EXPANDED_DATADIR}/dbus-1/services + 'make check' socket dir: ${TEST_SOCKET_DIR} +diff -Naur dbus-0.94-old/dbus/dbus-sysdeps-util-unix.c dbus-0.94/dbus/dbus-sysdeps-util-unix.c +--- dbus-0.94-old/dbus/dbus-sysdeps-util-unix.c 2006-10-08 18:56:50.000000000 +0200 ++++ dbus-0.94/dbus/dbus-sysdeps-util-unix.c 2006-10-25 18:23:11.206059750 +0200 +@@ -43,6 +43,7 @@ + #include + #include + #include ++#include + + #ifdef HAVE_SYS_SYSLIMITS_H + #include +@@ -359,8 +360,40 @@ + + DBusString f; + dbus_bool_t result; ++ int console; ++ pid_t fgconsole; + + result = FALSE; ++ ++ fgconsole = fork(); ++ if (fgconsole == 0) ++ { ++ execl (DBUS_FOREGROUND_CONSOLE_COMMAND, DBUS_FOREGROUND_CONSOLE_COMMAND, NULL); ++ exit (0); ++ } else if (fgconsole < 0) ++ { ++ dbus_set_error (error, DBUS_ERROR_FAILED, ++ "Failed to fork(): %s\n", _dbus_strerror (errno)); ++ return FALSE; ++ } ++ ++ if (wait (&console) < 0 || !WIFEXITED (console)) ++ { ++ dbus_set_error (error, DBUS_ERROR_FAILED, ++ "Failed to execute %s: %s\n", ++ DBUS_FOREGROUND_CONSOLE_COMMAND, _dbus_strerror (errno)); ++ return FALSE; ++ } ++ ++ console = WEXITSTATUS(console); ++ ++ /* Consoles start at 1, so 0 denotes failure */ ++ if (console == 0) ++ { ++ return FALSE; ++ } ++ ++ + if (!_dbus_string_init (&f)) + { + _DBUS_SET_OOM (error); +@@ -380,6 +413,19 @@ + goto out; + } + ++ /* : is used as a separator, since . is a valid username character */ ++ if (!_dbus_string_append (&f, ":")) ++ { ++ _DBUS_SET_OOM (error); ++ goto out; ++ } ++ ++ if (!_dbus_string_append_int (&f, console)) ++ { ++ _DBUS_SET_OOM (error); ++ goto out; ++ } ++ + result = _dbus_file_exists (_dbus_string_get_const_data (&f)); + + out: +diff -Naur dbus-0.94-old/tools/dbus-foreground-console.c dbus-0.94/tools/dbus-foreground-console.c +--- dbus-0.94-old/tools/dbus-foreground-console.c 1970-01-01 01:00:00.000000000 +0100 ++++ dbus-0.94/tools/dbus-foreground-console.c 2006-10-25 18:23:11.210060000 +0200 +@@ -0,0 +1,32 @@ ++/* dbus-foreground-console ++ * return the current foreground console ++ * Heavily based on fgconsole.c from console-tools ++ * Released under the terms of the GNU general public license, version 2.1 or ++ * later ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++int main() { ++ struct vt_stat vtstat; ++ int fd; ++ ++ fd = open("/dev/console", O_RDWR); ++ ++ if (fd < 1) { ++ return 0; ++ } ++ ++ if (ioctl(fd, VT_GETSTATE, &vtstat)) ++ { ++ return 0; ++ } ++ ++ return vtstat.v_active; ++} ++ +--- dbus/tools/Makefile.am.old 2006-11-07 22:19:37.217104250 +0100 ++++ dbus/tools/Makefile.am 2006-11-07 22:20:21.175851500 +0100 +@@ -2,7 +2,7 @@ + + INCLUDES=-I$(top_srcdir) $(DBUS_CLIENT_CFLAGS) $(DBUS_X_CFLAGS) -DDBUS_LOCALEDIR=\"@EXPANDED_DATADIR@/locale\" -DDBUS_COMPILATION -DDBUS_DAEMONDIR=\"@DBUS_DAEMONDIR@\" -DDBUS_MACHINE_UUID_FILE=\""$(localstatedir)/lib/dbus/machine-id"\" + +-bin_PROGRAMS=dbus-send dbus-monitor dbus-launch dbus-cleanup-sockets dbus-uuidgen ++bin_PROGRAMS=dbus-send dbus-monitor dbus-launch dbus-cleanup-sockets dbus-uuidgen dbus-foreground-console + + dbus_send_SOURCES= \ + dbus-print-message.c \ +@@ -25,6 +25,9 @@ + dbus_uuidgen_SOURCES= \ + dbus-uuidgen.c + ++dbus_foreground_console_SOURCES= \ ++ dbus-foreground-console.c ++ + dbus_send_LDADD= $(top_builddir)/dbus/libdbus-1.la $(DBUS_CLIENT_LIBS) + dbus_send_LDFLAGS=@R_DYNAMIC_LDFLAG@ + --- dbus-0.95.orig/debian/patches/99_autoreconf.patch +++ dbus-0.95/debian/patches/99_autoreconf.patch @@ -0,0 +1,23233 @@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/aclocal.m4 dbus-0.95/aclocal.m4 +--- dbus-0.95-old/aclocal.m4 2006-11-02 21:29:20.000000000 +0100 ++++ dbus-0.95/aclocal.m4 2006-11-07 22:22:38.484432750 +0100 +@@ -13,7 +13,7 @@ + + # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +-# serial 48 AC_PROG_LIBTOOL ++# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL + + + # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +@@ -1397,18 +1397,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -1564,7 +1552,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1578,27 +1566,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -1610,7 +1581,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1619,7 +1590,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -2327,7 +2298,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu | dragonfly*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) +@@ -2381,11 +2352,11 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else +@@ -3133,7 +3104,7 @@ + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes +@@ -3292,7 +3263,7 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler +@@ -3394,7 +3365,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -4305,9 +4276,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -4441,11 +4409,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -4457,7 +4425,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -4537,7 +4505,7 @@ + link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -4662,7 +4630,7 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +-linux*) ++linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +@@ -4935,7 +4903,7 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) +@@ -4978,7 +4946,7 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler +@@ -5021,7 +4989,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -5232,7 +5200,7 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +@@ -5373,6 +5341,9 @@ + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; ++ linux* | k*bsd*-gnu) ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; +@@ -5543,7 +5514,7 @@ + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -5569,12 +5540,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -5904,7 +5876,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -6006,7 +5978,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -6373,7 +6345,6 @@ + done + done + done +-IFS=$as_save_IFS + lt_ac_max=0 + lt_ac_count=0 + # Add /usr/xpg4/bin/sed as it is typically found on Solaris +@@ -6406,7 +6377,6 @@ + done + ]) + SED=$lt_cv_path_SED +-AC_SUBST([SED]) + AC_MSG_RESULT([$SED]) + ]) + +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/bus/Makefile.in dbus-0.95/bus/Makefile.in +--- dbus-0.95-old/bus/Makefile.in 2006-11-03 00:19:41.000000000 +0100 ++++ dbus-0.95/bus/Makefile.in 2006-11-07 22:22:54.349424250 +0100 +@@ -161,6 +161,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -206,6 +207,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -240,7 +242,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -253,17 +254,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -280,23 +279,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/config.h.in dbus-0.95/config.h.in +--- dbus-0.95-old/config.h.in 2006-11-07 22:22:12.714822000 +0100 ++++ dbus-0.95/config.h.in 2006-11-07 22:22:47.000000000 +0100 +@@ -240,25 +240,25 @@ + /* Define to the version of this package. */ + #undef PACKAGE_VERSION + +-/* The size of a `char', as computed by sizeof. */ ++/* The size of `char', as computed by sizeof. */ + #undef SIZEOF_CHAR + +-/* The size of a `int', as computed by sizeof. */ ++/* The size of `int', as computed by sizeof. */ + #undef SIZEOF_INT + +-/* The size of a `long', as computed by sizeof. */ ++/* The size of `long', as computed by sizeof. */ + #undef SIZEOF_LONG + +-/* The size of a `long long', as computed by sizeof. */ ++/* The size of `long long', as computed by sizeof. */ + #undef SIZEOF_LONG_LONG + +-/* The size of a `short', as computed by sizeof. */ ++/* The size of `short', as computed by sizeof. */ + #undef SIZEOF_SHORT + +-/* The size of a `void *', as computed by sizeof. */ ++/* The size of `void *', as computed by sizeof. */ + #undef SIZEOF_VOID_P + +-/* The size of a `__int64', as computed by sizeof. */ ++/* The size of `__int64', as computed by sizeof. */ + #undef SIZEOF___INT64 + + /* Define to 1 if you have the ANSI C header files. */ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/configure dbus-0.95/configure +--- dbus-0.95-old/configure 2006-11-02 21:29:28.000000000 +0100 ++++ dbus-0.95/configure 2006-11-07 22:22:43.412740750 +0100 +@@ -1,8 +1,9 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59. ++# Generated by GNU Autoconf 2.60a. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## +@@ -16,11 +17,35 @@ + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +@@ -29,8 +54,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -44,18 +104,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -63,157 +124,386 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. + fi + ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -222,7 +512,19 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++# Find out whether ``test -x'' works. Don't use a zero-byte file, as ++# systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ as_executable_p="test -x" ++else ++ as_executable_p=: ++fi ++rm -f conf$$.file + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,15 +533,6 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + + + # Check that we are running under the correct shell. +@@ -395,29 +688,26 @@ + + tagnames=${tagnames+${tagnames},}F77 + ++exec 7<&0 &1 ++ + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME= + PACKAGE_TARNAME= +@@ -429,42 +719,243 @@ + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar GETTEXT_PACKAGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LT_CURRENT LT_REVISION LT_AGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CPP EGREP DBUS_BUILD_TESTS_TRUE DBUS_BUILD_TESTS_FALSE R_DYNAMIC_LDFLAG SED LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL DBUS_GCOV_ENABLED_TRUE DBUS_GCOV_ENABLED_FALSE DBUS_INT64_TYPE DBUS_INT64_CONSTANT DBUS_UINT64_CONSTANT DBUS_HAVE_INT64 DBUS_INT32_TYPE DBUS_INT16_TYPE DBUS_PATH_OR_ABSTRACT PKG_CONFIG LIBXML_CFLAGS LIBXML_LIBS DBUS_USE_EXPAT_TRUE DBUS_USE_EXPAT_FALSE DBUS_USE_LIBXML_TRUE DBUS_USE_LIBXML_FALSE HAVE_SELINUX_TRUE HAVE_SELINUX_FALSE DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE DBUS_BUS_ENABLE_KQUEUE_TRUE DBUS_BUS_ENABLE_KQUEUE_FALSE HAVE_CONSOLE_OWNER_FILE_TRUE HAVE_CONSOLE_OWNER_FILE_FALSE DBUS_CLIENT_CFLAGS DBUS_CLIENT_LIBS DBUS_BUS_CFLAGS DBUS_BUS_LIBS DBUS_TEST_CFLAGS DBUS_TEST_LIBS X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS DBUS_X_CFLAGS DBUS_X_LIBS DOXYGEN DBUS_DOXYGEN_DOCS_ENABLED_TRUE DBUS_DOXYGEN_DOCS_ENABLED_FALSE XMLTO DBUS_XML_DOCS_ENABLED_TRUE DBUS_XML_DOCS_ENABLED_FALSE EXPANDED_LOCALSTATEDIR EXPANDED_SYSCONFDIR EXPANDED_BINDIR EXPANDED_LIBDIR EXPANDED_DATADIR DBUS_INIT_SCRIPTS_RED_HAT_TRUE DBUS_INIT_SCRIPTS_RED_HAT_FALSE DBUS_INIT_SCRIPTS_SLACKWARE_TRUE DBUS_INIT_SCRIPTS_SLACKWARE_FALSE DBUS_SYSTEM_SOCKET DBUS_SYSTEM_BUS_DEFAULT_ADDRESS DBUS_SYSTEM_PID_FILE DBUS_CONSOLE_AUTH_DIR DBUS_CONSOLE_OWNER_FILE DBUS_USER DBUS_DATADIR DBUS_DAEMONDIR DBUS_BINDIR TEST_SERVICE_DIR TEST_SERVICE_BINARY TEST_SHELL_SERVICE_BINARY TEST_EXIT_BINARY TEST_SEGFAULT_BINARY TEST_SLEEP_FOREVER_BINARY TEST_BUS_BINARY TEST_SOCKET_DIR DBUS_SESSION_SOCKET_DIR LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++GETTEXT_PACKAGE ++MAINTAINER_MODE_TRUE ++MAINTAINER_MODE_FALSE ++MAINT ++LT_CURRENT ++LT_REVISION ++LT_AGE ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++CXX ++CXXFLAGS ++ac_ct_CXX ++CXXDEPMODE ++am__fastdepCXX_TRUE ++am__fastdepCXX_FALSE ++CPP ++GREP ++EGREP ++DBUS_BUILD_TESTS_TRUE ++DBUS_BUILD_TESTS_FALSE ++R_DYNAMIC_LDFLAG ++LN_S ++ECHO ++AR ++RANLIB ++CXXCPP ++F77 ++FFLAGS ++ac_ct_F77 ++LIBTOOL ++DBUS_GCOV_ENABLED_TRUE ++DBUS_GCOV_ENABLED_FALSE ++DBUS_INT64_TYPE ++DBUS_INT64_CONSTANT ++DBUS_UINT64_CONSTANT ++DBUS_HAVE_INT64 ++DBUS_INT32_TYPE ++DBUS_INT16_TYPE ++DBUS_PATH_OR_ABSTRACT ++PKG_CONFIG ++LIBXML_CFLAGS ++LIBXML_LIBS ++DBUS_USE_EXPAT_TRUE ++DBUS_USE_EXPAT_FALSE ++DBUS_USE_LIBXML_TRUE ++DBUS_USE_LIBXML_FALSE ++HAVE_SELINUX_TRUE ++HAVE_SELINUX_FALSE ++DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE ++DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE ++DBUS_BUS_ENABLE_KQUEUE_TRUE ++DBUS_BUS_ENABLE_KQUEUE_FALSE ++HAVE_CONSOLE_OWNER_FILE_TRUE ++HAVE_CONSOLE_OWNER_FILE_FALSE ++DBUS_CLIENT_CFLAGS ++DBUS_CLIENT_LIBS ++DBUS_BUS_CFLAGS ++DBUS_BUS_LIBS ++DBUS_TEST_CFLAGS ++DBUS_TEST_LIBS ++XMKMF ++X_CFLAGS ++X_PRE_LIBS ++X_LIBS ++X_EXTRA_LIBS ++DBUS_X_CFLAGS ++DBUS_X_LIBS ++DOXYGEN ++DBUS_DOXYGEN_DOCS_ENABLED_TRUE ++DBUS_DOXYGEN_DOCS_ENABLED_FALSE ++XMLTO ++DBUS_XML_DOCS_ENABLED_TRUE ++DBUS_XML_DOCS_ENABLED_FALSE ++EXPANDED_LOCALSTATEDIR ++EXPANDED_SYSCONFDIR ++EXPANDED_BINDIR ++EXPANDED_LIBDIR ++EXPANDED_DATADIR ++DBUS_INIT_SCRIPTS_RED_HAT_TRUE ++DBUS_INIT_SCRIPTS_RED_HAT_FALSE ++DBUS_INIT_SCRIPTS_SLACKWARE_TRUE ++DBUS_INIT_SCRIPTS_SLACKWARE_FALSE ++DBUS_SYSTEM_SOCKET ++DBUS_SYSTEM_BUS_DEFAULT_ADDRESS ++DBUS_SYSTEM_PID_FILE ++DBUS_CONSOLE_AUTH_DIR ++DBUS_CONSOLE_OWNER_FILE ++DBUS_FOREGROUND_CONSOLE_COMMAND ++DBUS_USER ++DBUS_DATADIR ++DBUS_DAEMONDIR ++DBUS_BINDIR ++TEST_SERVICE_DIR ++TEST_SERVICE_BINARY ++TEST_SHELL_SERVICE_BINARY ++TEST_EXIT_BINARY ++TEST_SEGFAULT_BINARY ++TEST_SLEEP_FOREVER_BINARY ++TEST_BUS_BINARY ++TEST_SOCKET_DIR ++DBUS_SESSION_SOCKET_DIR ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++CXX ++CXXFLAGS ++CCC ++CPP ++CXXCPP ++F77 ++FFLAGS ++XMKMF' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -491,34 +982,48 @@ + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -540,12 +1045,18 @@ + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +@@ -553,7 +1064,17 @@ + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` +@@ -562,11 +1083,7 @@ + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -593,6 +1110,12 @@ + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -617,13 +1140,16 @@ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -688,6 +1214,16 @@ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -744,11 +1280,7 @@ + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` +@@ -757,7 +1289,7 @@ + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -788,8 +1320,7 @@ + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -809,27 +1340,19 @@ + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -856,94 +1379,76 @@ + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } +- fi +-fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 +- { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CXX_set=${CXX+set} +-ac_env_CXX_value=$CXX +-ac_cv_env_CXX_set=${CXX+set} +-ac_cv_env_CXX_value=$CXX +-ac_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_env_CXXFLAGS_value=$CXXFLAGS +-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_cv_env_CXXFLAGS_value=$CXXFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP +-ac_env_CXXCPP_set=${CXXCPP+set} +-ac_env_CXXCPP_value=$CXXCPP +-ac_cv_env_CXXCPP_set=${CXXCPP+set} +-ac_cv_env_CXXCPP_value=$CXXCPP +-ac_env_F77_set=${F77+set} +-ac_env_F77_value=$F77 +-ac_cv_env_F77_set=${F77+set} +-ac_cv_env_F77_value=$F77 +-ac_env_FFLAGS_set=${FFLAGS+set} +-ac_env_FFLAGS_value=$FFLAGS +-ac_cv_env_FFLAGS_set=${FFLAGS+set} +-ac_cv_env_FFLAGS_value=$FFLAGS ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { (exit 1); exit 1; }; } ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -972,9 +1477,6 @@ + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -992,15 +1494,22 @@ + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1048,10 +1557,8 @@ + --enable-kqueue build with kqueue support + --enable-console-owner-file + enable console owner file +- --enable-shared[=PKGS] +- build shared libraries [default=yes] +- --enable-static[=PKGS] +- build static libraries [default=yes] ++ --enable-shared[=PKGS] build shared libraries [default=yes] ++ --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) +@@ -1081,8 +1588,7 @@ + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] +- include additional configurations [automatic] ++ --with-tags[=TAGS] include additional configurations [automatic] + --with-x use the X Window System + + Some influential environment variables: +@@ -1090,131 +1596,100 @@ + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CPP C preprocessor + CXXCPP C++ preprocessor + F77 Fortran 77 compiler command + FFLAGS Fortran 77 compiler flags ++ XMKMF Path to xmkmf, Makefile generator for X Window System + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd $ac_popdir ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.60a + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.60a. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -1233,7 +1708,7 @@ + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1247,6 +1722,7 @@ + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1268,7 +1744,6 @@ + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1279,7 +1754,7 @@ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1301,9 +1776,7 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1314,8 +1787,8 @@ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1328,20 +1801,34 @@ + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1352,22 +1839,28 @@ + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1379,26 +1872,24 @@ + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1429,14 +1920,17 @@ + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1452,8 +1946,8 @@ + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1465,12 +1959,11 @@ + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1495,8 +1988,7 @@ + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1513,12 +2005,6 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- + + + +@@ -1535,108 +2021,163 @@ + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking target system type" >&5 +-echo $ECHO_N "checking target system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } + if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_target_alias=$target_alias +-test "x$ac_cv_target_alias" = "x" && +- ac_cv_target_alias=$ac_cv_host_alias +-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +-echo "${ECHO_T}$ac_cv_target" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + target=$ac_cv_target +-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + + # The aliases save the names the user supplied, while $host etc. +@@ -1660,8 +2201,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -1683,7 +2224,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1702,21 +2243,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1726,8 +2268,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -1769,20 +2311,20 @@ + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" + # Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. + cat <<\_ACEOF >conftest.sed + s/[\\$]/&&/g;s/;s,x,x,$// + _ACEOF + program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed ++rm -f conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -1834,8 +2376,8 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1848,54 +2390,57 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- echo "$as_me:$LINENO: result: $AWK" >&5 +-echo "${ECHO_T}$AWK" >&6 ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$AWK" && break + done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -1966,8 +2511,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1980,32 +2525,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2018,27 +2565,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi +@@ -2059,7 +2620,7 @@ + + + +- ac_config_headers="$ac_config_headers config.h" ++ac_config_headers="$ac_config_headers config.h" + + + # Honor aclocal flags +@@ -2074,17 +2635,17 @@ + + + ## must come before we use the $USE_MAINTAINER_MODE variable later +-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 +- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } ++ # Check whether --enable-maintainer-mode was given. + if test "${enable_maintainer_mode+set}" = set; then +- enableval="$enable_maintainer_mode" +- USE_MAINTAINER_MODE=$enableval ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval + else + USE_MAINTAINER_MODE=no +-fi; +- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 ++fi ++ ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + + + if test $USE_MAINTAINER_MODE = yes; then +@@ -2129,8 +2690,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2143,32 +2704,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2181,36 +2744,51 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2223,74 +2801,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2304,7 +2842,7 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -2315,6 +2853,7 @@ + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -2332,22 +2871,23 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2360,36 +2900,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2402,29 +2944,45 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -2437,21 +2995,35 @@ + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -2476,47 +3048,77 @@ + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -2528,19 +3130,21 @@ + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2559,22 +3163,27 @@ + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -2585,9 +3194,8 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -2601,14 +3209,14 @@ + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2628,14 +3236,20 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -2653,12 +3267,12 @@ + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2681,24 +3295,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2707,24 +3333,28 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2740,24 +3370,147 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2766,12 +3519,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2787,12 +3548,12 @@ + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2826,12 +3587,17 @@ + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2846,205 +3612,74 @@ + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -3052,7 +3687,7 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" + +- ac_config_commands="$ac_config_commands depfiles" ++ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} +@@ -3062,8 +3697,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -3090,15 +3725,15 @@ + fi + + +-echo "$as_me:$LINENO: result: $_am_result" >&5 +-echo "${ECHO_T}$_am_result" >&6 ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } + rm -f confinc confmf + +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. ++# Check whether --enable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then +- enableval="$enable_dependency_tracking" ++ enableval=$enable_dependency_tracking; ++fi + +-fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +@@ -3118,8 +3753,8 @@ + + depcc="$CC" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3208,8 +3843,8 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + +@@ -3225,18 +3860,22 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3249,36 +3888,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then +- echo "$as_me:$LINENO: result: $CXX" >&5 +-echo "${ECHO_T}$CXX" >&6 ++ { echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CXX" && break + done + fi + if test -z "$CXX"; then + ac_ct_CXX=$CXX +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3291,55 +3932,85 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then +- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-echo "${ECHO_T}$ac_ct_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CXX" && break + done +-test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + +- CXX=$ac_ct_CXX ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX ++ fi + fi + +- ++ fi ++fi + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C++ compiler version" >&5 ++echo "$as_me:$LINENO: checking for C++ compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } + if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3362,24 +4033,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3388,24 +4071,28 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } + GXX=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CXXFLAGS=${CXXFLAGS+set} + ac_save_CXXFLAGS=$CXXFLAGS +-CXXFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cxx_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -3421,24 +4108,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3447,70 +4146,53 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cxx_g=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF ++ CXXFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration +-#include ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3519,61 +4201,91 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- break ++ ac_cv_prog_cxx_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi ++fi + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -3582,8 +4294,8 @@ + + depcc="$CXX" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3672,8 +4384,8 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + +@@ -3690,13 +4402,12 @@ + + + +-echo "$as_me:$LINENO: checking for library containing strerror" >&5 +-echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for library containing strerror" >&5 ++echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; } + if test "${ac_cv_search_strerror+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS +-ac_cv_search_strerror=no + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -3704,115 +4415,89 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char strerror (); + int + main () + { +-strerror (); ++return strerror (); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++for ac_lib in '' cposix; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_cv_search_strerror="none required" ++ ac_cv_search_strerror=$ac_res + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_strerror" = no; then +- for ac_lib in cposix; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char strerror (); +-int +-main () +-{ +-strerror (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_strerror="-l$ac_lib" +-break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_strerror+set}" = set; then ++ break + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++done ++if test "${ac_cv_search_strerror+set}" = set; then ++ : ++else ++ ac_cv_search_strerror=no + fi ++rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +-echo "${ECHO_T}$ac_cv_search_strerror" >&6 +-if test "$ac_cv_search_strerror" != no; then +- test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" ++{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 ++echo "${ECHO_T}$ac_cv_search_strerror" >&6; } ++ac_res=$ac_cv_search_strerror ++if test "$ac_res" != no; then ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + + fi + +@@ -3821,8 +4506,8 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -3856,8 +4541,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -3882,9 +4572,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3894,8 +4585,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -3922,6 +4618,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -3939,8 +4636,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -3963,8 +4660,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -3989,9 +4691,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4001,8 +4704,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -4029,6 +4737,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4051,28 +4760,175 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep +- +- +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +-if test "${ac_cv_header_stdc+set}" = set; then ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF +@@ -4091,24 +4947,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4117,9 +4985,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -4175,6 +5044,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -4194,18 +5064,27 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4218,12 +5097,14 @@ + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -4233,158 +5114,158 @@ + fi + + +-# Check whether --enable-tests or --disable-tests was given. ++# Check whether --enable-tests was given. + if test "${enable_tests+set}" = set; then +- enableval="$enable_tests" +- enable_tests=$enableval ++ enableval=$enable_tests; enable_tests=$enableval + else + enable_tests=$USE_MAINTAINER_MODE +-fi; +-# Check whether --enable-ansi or --disable-ansi was given. ++fi ++ ++# Check whether --enable-ansi was given. + if test "${enable_ansi+set}" = set; then +- enableval="$enable_ansi" +- enable_ansi=$enableval ++ enableval=$enable_ansi; enable_ansi=$enableval + else + enable_ansi=no +-fi; +-# Check whether --enable-verbose-mode or --disable-verbose-mode was given. ++fi ++ ++# Check whether --enable-verbose-mode was given. + if test "${enable_verbose_mode+set}" = set; then +- enableval="$enable_verbose_mode" +- enable_verbose_mode=$enableval ++ enableval=$enable_verbose_mode; enable_verbose_mode=$enableval + else + enable_verbose_mode=$USE_MAINTAINER_MODE +-fi; +-# Check whether --enable-asserts or --disable-asserts was given. ++fi ++ ++# Check whether --enable-asserts was given. + if test "${enable_asserts+set}" = set; then +- enableval="$enable_asserts" +- enable_asserts=$enableval ++ enableval=$enable_asserts; enable_asserts=$enableval + else + enable_asserts=$USE_MAINTAINER_MODE +-fi; +-# Check whether --enable-checks or --disable-checks was given. ++fi ++ ++# Check whether --enable-checks was given. + if test "${enable_checks+set}" = set; then +- enableval="$enable_checks" +- enable_checks=$enableval ++ enableval=$enable_checks; enable_checks=$enableval + else + enable_checks=yes +-fi; +-# Check whether --enable-xml-docs or --disable-xml-docs was given. ++fi ++ ++# Check whether --enable-xml-docs was given. + if test "${enable_xml_docs+set}" = set; then +- enableval="$enable_xml_docs" +- enable_xml_docs=$enableval ++ enableval=$enable_xml_docs; enable_xml_docs=$enableval + else + enable_xml_docs=auto +-fi; +-# Check whether --enable-doxygen-docs or --disable-doxygen-docs was given. ++fi ++ ++# Check whether --enable-doxygen-docs was given. + if test "${enable_doxygen_docs+set}" = set; then +- enableval="$enable_doxygen_docs" +- enable_doxygen_docs=$enableval ++ enableval=$enable_doxygen_docs; enable_doxygen_docs=$enableval + else + enable_doxygen_docs=auto +-fi; +-# Check whether --enable-gcov or --disable-gcov was given. ++fi ++ ++# Check whether --enable-gcov was given. + if test "${enable_gcov+set}" = set; then +- enableval="$enable_gcov" +- enable_gcov=$enableval ++ enableval=$enable_gcov; enable_gcov=$enableval + else + enable_gcov=no +-fi; +-# Check whether --enable-abstract-sockets or --disable-abstract-sockets was given. ++fi ++ ++# Check whether --enable-abstract-sockets was given. + if test "${enable_abstract_sockets+set}" = set; then +- enableval="$enable_abstract_sockets" +- enable_abstract_sockets=$enableval ++ enableval=$enable_abstract_sockets; enable_abstract_sockets=$enableval + else + enable_abstract_sockets=auto +-fi; +-# Check whether --enable-selinux or --disable-selinux was given. ++fi ++ ++# Check whether --enable-selinux was given. + if test "${enable_selinux+set}" = set; then +- enableval="$enable_selinux" +- enable_selinux=$enableval ++ enableval=$enable_selinux; enable_selinux=$enableval + else + enable_selinux=auto +-fi; +-# Check whether --enable-dnotify or --disable-dnotify was given. ++fi ++ ++# Check whether --enable-dnotify was given. + if test "${enable_dnotify+set}" = set; then +- enableval="$enable_dnotify" +- enable_dnotify=$enableval ++ enableval=$enable_dnotify; enable_dnotify=$enableval + else + enable_dnotify=auto +-fi; +-# Check whether --enable-kqueue or --disable-kqueue was given. ++fi ++ ++# Check whether --enable-kqueue was given. + if test "${enable_kqueue+set}" = set; then +- enableval="$enable_kqueue" +- enable_kqueue=$enableval ++ enableval=$enable_kqueue; enable_kqueue=$enableval + else + enable_kqueue=auto +-fi; +-# Check whether --enable-console-owner-file or --disable-console-owner-file was given. ++fi ++ ++# Check whether --enable-console-owner-file was given. + if test "${enable_console_owner_file+set}" = set; then +- enableval="$enable_console_owner_file" +- enable_console_owner_file=$enableval ++ enableval=$enable_console_owner_file; enable_console_owner_file=$enableval + else + enable_console_owner_file=auto +-fi; ++fi ++ + + +-# Check whether --with-xml or --without-xml was given. ++# Check whether --with-xml was given. + if test "${with_xml+set}" = set; then +- withval="$with_xml" ++ withval=$with_xml; ++fi + +-fi; + +-# Check whether --with-init-scripts or --without-init-scripts was given. ++# Check whether --with-init-scripts was given. + if test "${with_init_scripts+set}" = set; then +- withval="$with_init_scripts" ++ withval=$with_init_scripts; ++fi + +-fi; + +-# Check whether --with-session-socket-dir or --without-session-socket-dir was given. ++# Check whether --with-session-socket-dir was given. + if test "${with_session_socket_dir+set}" = set; then +- withval="$with_session_socket_dir" ++ withval=$with_session_socket_dir; ++fi + +-fi; + +-# Check whether --with-test-socket-dir or --without-test-socket-dir was given. ++# Check whether --with-test-socket-dir was given. + if test "${with_test_socket_dir+set}" = set; then +- withval="$with_test_socket_dir" ++ withval=$with_test_socket_dir; ++fi + +-fi; + +-# Check whether --with-system-pid-file or --without-system-pid-file was given. ++# Check whether --with-system-pid-file was given. + if test "${with_system_pid_file+set}" = set; then +- withval="$with_system_pid_file" ++ withval=$with_system_pid_file; ++fi + +-fi; + +-# Check whether --with-system-socket or --without-system-socket was given. ++# Check whether --with-system-socket was given. + if test "${with_system_socket+set}" = set; then +- withval="$with_system_socket" ++ withval=$with_system_socket; ++fi + +-fi; + +-# Check whether --with-console-auth-dir or --without-console-auth-dir was given. ++# Check whether --with-console-auth-dir was given. + if test "${with_console_auth_dir+set}" = set; then +- withval="$with_console_auth_dir" ++ withval=$with_console_auth_dir; ++fi + +-fi; + +-# Check whether --with-console-owner-file or --without-console-owner-file was given. ++# Check whether --with-console-owner-file was given. + if test "${with_console_owner_file+set}" = set; then +- withval="$with_console_owner_file" ++ withval=$with_console_owner_file; ++fi + +-fi; + +-# Check whether --with-dbus_user or --without-dbus_user was given. ++# Check whether --with-dbus_user was given. + if test "${with_dbus_user+set}" = set; then +- withval="$with_dbus_user" ++ withval=$with_dbus_user; ++fi + +-fi; + +-# Check whether --with-dbus_daemondir or --without-dbus_daemondir was given. ++# Check whether --with-dbus_daemondir was given. + if test "${with_dbus_daemondir+set}" = set; then +- withval="$with_dbus_daemondir" ++ withval=$with_dbus_daemondir; ++fi + +-fi; + + + +@@ -4458,18 +5339,18 @@ + #### gcc warning flags + + cc_supports_flag() { +- echo "$as_me:$LINENO: checking whether $CC supports \"$@\"" >&5 +-echo $ECHO_N "checking whether $CC supports \"$@\"... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether $CC supports \"$@\"" >&5 ++echo $ECHO_N "checking whether $CC supports \"$@\"... $ECHO_C" >&6; } + Cfile=/tmp/foo${$} + touch ${Cfile}.c + $CC -c "$@" ${Cfile}.c -o ${Cfile}.o >/dev/null 2>&1 + rc=$? + rm -f ${Cfile}.c ${Cfile}.o + case $rc in +- 0) echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6;; +- *) echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6;; ++ 0) { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; };; ++ *) { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; };; + esac + return $rc + } +@@ -4596,10 +5477,9 @@ + CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS" ;; + esac + +-# Check whether --enable-shared or --disable-shared was given. ++# Check whether --enable-shared was given. + if test "${enable_shared+set}" = set; then +- enableval="$enable_shared" +- p=${PACKAGE-default} ++ enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; +@@ -4618,12 +5498,12 @@ + esac + else + enable_shared=yes +-fi; ++fi ++ + +-# Check whether --enable-static or --disable-static was given. ++# Check whether --enable-static was given. + if test "${enable_static+set}" = set; then +- enableval="$enable_static" +- p=${PACKAGE-default} ++ enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; +@@ -4642,12 +5522,12 @@ + esac + else + enable_static=yes +-fi; ++fi ++ + +-# Check whether --enable-fast-install or --disable-fast-install was given. ++# Check whether --enable-fast-install was given. + if test "${enable_fast_install+set}" = set; then +- enableval="$enable_fast_install" +- p=${PACKAGE-default} ++ enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; +@@ -4666,10 +5546,11 @@ + esac + else + enable_fast_install=yes +-fi; ++fi ++ + +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } + if test "${lt_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4688,7 +5569,6 @@ + done + done + done +-IFS=$as_save_IFS + lt_ac_max=0 + lt_ac_count=0 + # Add /usr/xpg4/bin/sed as it is typically found on Solaris +@@ -4723,23 +5603,22 @@ + fi + + SED=$lt_cv_path_SED +- +-echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6 ++{ echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6; } + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -4768,11 +5647,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -4805,17 +5684,17 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- echo "$as_me:$LINENO: result: $LD" >&5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4829,20 +5708,20 @@ + ;; + esac + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag + case $reload_flag in + "" | " "*) ;; +@@ -4859,8 +5738,8 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4908,23 +5787,23 @@ + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-echo "${ECHO_T}$lt_cv_path_NM" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } + NM="$lt_cv_path_NM" + +-echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } + fi + +-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 ++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; } + if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4974,7 +5853,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu | dragonfly*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) +@@ -5028,11 +5907,11 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +@@ -5099,8 +5978,8 @@ + esac + + fi +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -5117,11 +5996,11 @@ + # Allow CC to be a program name with arguments. + compiler=$CC + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good +@@ -5148,7 +6027,7 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 5151 "configure"' > conftest.$ac_ext ++ echo '#line 6030 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +@@ -5233,8 +6112,8 @@ + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } + if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5260,24 +6139,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5286,9 +6177,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-lt_cv_cc_needs_belf=no ++ lt_cv_cc_needs_belf=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -5297,8 +6189,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" +@@ -5344,9 +6236,9 @@ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5360,24 +6252,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5386,12 +6290,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -5406,18 +6312,19 @@ + for ac_header in dlfcn.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5428,24 +6335,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5454,15 +6373,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5471,8 +6391,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5496,9 +6421,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -5522,25 +6448,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -5557,13 +6477,13 @@ + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cc ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } + if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -5593,8 +6513,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5619,9 +6544,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5631,8 +6557,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5659,6 +6590,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5676,8 +6608,8 @@ + else + ac_cv_prog_CXXCPP=$CXXCPP + fi +-echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-echo "${ECHO_T}$CXXCPP" >&6 ++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6; } + ac_preproc_ok=false + for ac_cxx_preproc_warn_flag in '' yes + do +@@ -5700,8 +6632,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5726,9 +6663,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5738,8 +6676,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5766,6 +6709,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5781,7 +6725,7 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -5795,12 +6739,12 @@ + ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_f77_compiler_gnu + if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5813,36 +6757,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + F77=$ac_cv_prog_F77 + if test -n "$F77"; then +- echo "$as_me:$LINENO: result: $F77" >&5 +-echo "${ECHO_T}$F77" >&6 ++ { echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$F77" && break + done + fi + if test -z "$F77"; then + ac_ct_F77=$F77 +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5855,48 +6801,78 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_F77=$ac_cv_prog_ac_ct_F77 + if test -n "$ac_ct_F77"; then +- echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-echo "${ECHO_T}$ac_ct_F77" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_F77" && break + done + +- F77=$ac_ct_F77 ++ if test "x$ac_ct_F77" = x; then ++ F77="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ F77=$ac_ct_F77 ++ fi + fi + + + # Provide some information about the compiler. +-echo "$as_me:5885:" \ +- "checking for Fortran 77 compiler version" >&5 ++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -5906,8 +6882,8 @@ + # input file. (Note that this only needs to work for GNU compilers.) + ac_save_ext=$ac_ext + ac_ext=F +-echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } + if test "${ac_cv_f77_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5920,24 +6896,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5946,20 +6934,21 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_f77_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } + ac_ext=$ac_save_ext + ac_test_FFLAGS=${FFLAGS+set} + ac_save_FFLAGS=$FFLAGS + FFLAGS= +-echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_f77_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5970,24 +6959,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5996,13 +6997,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_f77_g=no ++ ac_cv_prog_f77_g=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } + if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS + elif test $ac_cv_prog_f77_g = yes; then +@@ -6031,8 +7033,8 @@ + # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + + # find the maximum length of command line arguments +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } + if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6140,19 +7142,19 @@ + fi + + if test -n $lt_cv_sys_max_cmd_len ; then +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } + else +- echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6 ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } + fi + + + + + # Check for command to grab the raw symbol name followed by C symbol from nm. +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6187,7 +7189,7 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +-linux*) ++linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +@@ -6356,15 +7358,15 @@ + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6 ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6 ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi + +-echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } + if test "${lt_cv_objdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6378,8 +7380,8 @@ + fi + rmdir .libs 2>/dev/null + fi +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-echo "${ECHO_T}$lt_cv_objdir" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } + objdir=$lt_cv_objdir + + +@@ -6430,8 +7432,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. + set dummy ${ac_tool_prefix}ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6444,32 +7446,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AR=$ac_cv_prog_AR + if test -n "$AR"; then +- echo "$as_me:$LINENO: result: $AR" >&5 +-echo "${ECHO_T}$AR" >&6 ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. + set dummy ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6482,27 +7486,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" + fi + fi + ac_ct_AR=$ac_cv_prog_ac_ct_AR + if test -n "$ac_ct_AR"; then +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-echo "${ECHO_T}$ac_ct_AR" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- AR=$ac_ct_AR ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi + else + AR="$ac_cv_prog_AR" + fi +@@ -6510,8 +7528,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6524,32 +7542,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6562,27 +7582,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- RANLIB=$ac_ct_RANLIB ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi + else + RANLIB="$ac_cv_prog_RANLIB" + fi +@@ -6590,8 +7624,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6604,32 +7638,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6642,27 +7678,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi +@@ -6721,8 +7771,8 @@ + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6774,17 +7824,17 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6836,11 +7886,11 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + else +@@ -6855,21 +7905,21 @@ + enable_dlopen=no + enable_win32_dll=no + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +-# Check whether --with-pic or --without-pic was given. ++# Check whether --with-pic was given. + if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" ++ withval=$with_pic; pic_mode="$withval" + else + pic_mode=default +-fi; ++fi ++ + test -z "$pic_mode" && pic_mode=default + + # Use C for the default configuration in the libtool script +@@ -6927,8 +7977,8 @@ + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6945,11 +7995,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6948: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:7998: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:6952: \$? = $ac_status" >&5 ++ echo "$as_me:8002: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -6962,8 +8012,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +@@ -6977,8 +8027,8 @@ + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -7107,7 +8157,7 @@ + lt_prog_compiler_static='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' +@@ -7187,16 +8237,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7213,11 +8263,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7216: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8266: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:7220: \$? = $ac_status" >&5 ++ echo "$as_me:8270: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -7230,8 +8280,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; } + + if test x"$lt_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in +@@ -7258,8 +8308,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7286,8 +8336,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; } + + if test x"$lt_prog_compiler_static_works" = xyes; then + : +@@ -7296,8 +8346,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7317,11 +8367,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7320: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8370: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:7324: \$? = $ac_status" >&5 ++ echo "$as_me:8374: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -7343,23 +8393,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -7369,8 +8419,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag= +@@ -7546,7 +8596,7 @@ + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -7572,12 +8622,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -7785,24 +8836,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -7816,8 +8879,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -7846,24 +8911,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -7877,8 +8954,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -8009,7 +9088,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes +@@ -8111,7 +9190,7 @@ + link_all_deplibs=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -8327,8 +9406,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } + test "$ld_shlibs" = no && can_build_shared=no + + # +@@ -8348,8 +9427,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -8386,16 +9465,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -8601,18 +9680,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -8768,7 +9835,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -8782,31 +9849,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 8789 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -8818,7 +9864,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -8827,7 +9873,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -9003,8 +10049,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -9012,8 +10058,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ +@@ -9037,8 +10083,8 @@ + # directories. + hardcode_action=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } + + if test "$hardcode_action" = relink; then + # Fast installation is not supported +@@ -9051,29 +10097,29 @@ + + striplib= + old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else + # FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ;; + *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + esac + fi +@@ -9105,8 +10151,8 @@ + + darwin*) + # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9119,40 +10165,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9161,14 +10219,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +@@ -9182,8 +10241,8 @@ + ;; + + *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } + if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9210,53 +10269,59 @@ + + #undef shl_load + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) ++#if defined __stub_shl_load || defined __stub___shl_load + choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != shl_load; ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9265,18 +10330,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shl_load=no ++ ac_cv_func_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } + if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" + else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9289,40 +10355,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + int + main () + { +-shl_load (); ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9331,19 +10409,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_shl_load=no ++ ac_cv_lib_dld_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } + if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" + else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } + if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9370,53 +10449,59 @@ + + #undef dlopen + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) ++#if defined __stub_dlopen || defined __stub___dlopen + choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != dlopen; ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9425,18 +10510,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_dlopen=no ++ ac_cv_func_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } + if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" + else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9449,40 +10535,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9491,19 +10589,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } + if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9516,40 +10615,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9558,19 +10669,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_svld_dlopen=no ++ ac_cv_lib_svld_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } + if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9583,40 +10695,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dld_link (); + int + main () + { +-dld_link (); ++return dld_link (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9625,14 +10749,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_dld_link=no ++ ac_cv_lib_dld_dld_link=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } + if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" + fi +@@ -9672,8 +10797,8 @@ + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9683,7 +10808,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9783,7 +10908,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" +@@ -9890,13 +11015,13 @@ + + + # Report which library types will actually be built +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -9916,15 +11041,15 @@ + fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + # The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh +@@ -10114,9 +11239,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$GCC + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -10250,11 +11372,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_predep_objects | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_predep_objects + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_postdep_objects | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_postdep_objects + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -10266,7 +11388,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_compiler_lib_search_path | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_compiler_lib_search_path + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -10346,7 +11468,7 @@ + link_all_deplibs=$link_all_deplibs + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -10419,11 +11541,11 @@ + CC="$lt_save_CC" + + +-# Check whether --with-tags or --without-tags was given. ++# Check whether --with-tags was given. + if test "${with_tags+set}" = set; then +- withval="$with_tags" +- tagnames="$withval" +-fi; ++ withval=$with_tags; tagnames="$withval" ++fi ++ + + if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then +@@ -10477,7 +11599,7 @@ + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cc ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -10596,18 +11718,18 @@ + # Set up default GNU C++ configuration + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -10636,11 +11758,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -10673,17 +11795,17 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- echo "$as_me:$LINENO: result: $LD" >&5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -10697,8 +11819,8 @@ + ;; + esac + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +@@ -10748,8 +11870,8 @@ + fi + + # PORTME: fill in a description of your system's C++ link characteristics +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) +@@ -10861,24 +11983,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -10892,8 +12026,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -10923,24 +12059,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -10954,8 +12102,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -11103,7 +12253,7 @@ + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes +@@ -11262,7 +12412,7 @@ + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler +@@ -11364,7 +12514,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -11686,8 +12836,8 @@ + ld_shlibs_CXX=no + ;; + esac +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" +@@ -11826,8 +12976,8 @@ + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -11931,7 +13081,7 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) +@@ -11974,7 +13124,7 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler +@@ -12017,7 +13167,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -12100,16 +13250,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_CXX"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -12126,11 +13276,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:12129: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13279: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:12133: \$? = $ac_status" >&5 ++ echo "$as_me:13283: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -12143,8 +13293,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; } + + if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in +@@ -12171,8 +13321,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -12199,8 +13349,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; } + + if test x"$lt_prog_compiler_static_works_CXX" = xyes; then + : +@@ -12209,8 +13359,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -12230,11 +13380,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:12233: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13383: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:12237: \$? = $ac_status" >&5 ++ echo "$as_me:13387: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -12256,23 +13406,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -12282,8 +13432,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in +@@ -12302,13 +13452,16 @@ + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + # +@@ -12328,8 +13481,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -12366,16 +13519,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -12581,18 +13734,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -12748,7 +13889,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -12762,31 +13903,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 12769 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -12798,7 +13918,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -12807,7 +13927,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -12983,8 +14103,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -12992,8 +14112,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_CXX= + if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ +@@ -13017,8 +14137,8 @@ + # directories. + hardcode_action_CXX=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-echo "${ECHO_T}$hardcode_action_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6; } + + if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported +@@ -13170,9 +14290,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$GCC_CXX + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -13306,11 +14423,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_predep_objects_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_predep_objects_CXX + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_postdep_objects_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_postdep_objects_CXX + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -13322,7 +14439,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -13402,7 +14519,7 @@ + link_all_deplibs=$link_all_deplibs_CXX + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -13546,13 +14663,13 @@ + cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -13571,15 +14688,15 @@ + fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + GCC_F77="$G77" + LD_F77="$LD" +@@ -13588,8 +14705,8 @@ + lt_prog_compiler_pic_F77= + lt_prog_compiler_static_F77= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' +@@ -13718,7 +14835,7 @@ + lt_prog_compiler_static_F77='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' +@@ -13798,16 +14915,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_F77"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13824,11 +14941,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13827: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14944: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:13831: \$? = $ac_status" >&5 ++ echo "$as_me:14948: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -13841,8 +14958,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; } + + if test x"$lt_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in +@@ -13869,8 +14986,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13897,8 +15014,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; } + + if test x"$lt_prog_compiler_static_works_F77" = xyes; then + : +@@ -13907,8 +15024,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13928,11 +15045,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13931: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:15048: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:13935: \$? = $ac_status" >&5 ++ echo "$as_me:15052: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -13954,23 +15071,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -13980,8 +15097,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_F77= +@@ -14157,7 +15274,7 @@ + archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -14183,12 +15300,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_F77=no + else + ld_shlibs_F77=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -14386,24 +15504,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -14417,8 +15547,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -14437,24 +15569,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -14468,8 +15612,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -14600,7 +15746,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes +@@ -14702,7 +15848,7 @@ + link_all_deplibs_F77=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -14918,8 +16064,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-echo "${ECHO_T}$ld_shlibs_F77" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6; } + test "$ld_shlibs_F77" = no && can_build_shared=no + + # +@@ -14939,8 +16085,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -14977,16 +16123,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -15192,18 +16338,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -15359,7 +16493,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -15373,31 +16507,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 15380 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -15409,7 +16522,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -15418,7 +16531,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -15594,8 +16707,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -15603,8 +16716,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_F77= + if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ +@@ -15628,8 +16741,8 @@ + # directories. + hardcode_action_F77=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-echo "${ECHO_T}$hardcode_action_F77" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6; } + + if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported +@@ -15781,9 +16894,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$GCC_F77 + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -15917,11 +17027,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_predep_objects_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_predep_objects_F77 + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_postdep_objects_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_postdep_objects_F77 + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -15933,7 +17043,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_compiler_lib_search_path_F77 + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -16013,7 +17123,7 @@ + link_all_deplibs=$link_all_deplibs_F77 + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -16069,7 +17179,6 @@ + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +- + # Source file extension for Java test sources. + ac_ext=java + +@@ -16137,8 +17246,8 @@ + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16155,11 +17264,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16158: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17267: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:16162: \$? = $ac_status" >&5 ++ echo "$as_me:17271: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -16172,8 +17281,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +@@ -16187,8 +17296,8 @@ + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_static_GCJ= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -16317,7 +17426,7 @@ + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -16397,16 +17506,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_GCJ"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16423,11 +17532,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16426: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17535: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:16430: \$? = $ac_status" >&5 ++ echo "$as_me:17539: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -16440,8 +17549,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; } + + if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in +@@ -16468,8 +17577,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16496,8 +17605,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; } + + if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then + : +@@ -16506,8 +17615,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16527,11 +17636,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16530: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17639: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:16534: \$? = $ac_status" >&5 ++ echo "$as_me:17643: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -16553,23 +17662,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -16579,8 +17688,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_GCJ= +@@ -16756,7 +17865,7 @@ + archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -16782,12 +17891,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_GCJ=no + else + ld_shlibs_GCJ=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -16995,24 +18105,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -17026,8 +18148,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -17056,24 +18180,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -17087,8 +18223,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -17219,7 +18357,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes +@@ -17321,7 +18459,7 @@ + link_all_deplibs_GCJ=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -17537,8 +18675,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-echo "${ECHO_T}$ld_shlibs_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } + test "$ld_shlibs_GCJ" = no && can_build_shared=no + + # +@@ -17558,8 +18696,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -17596,16 +18734,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -17811,18 +18949,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -17978,7 +19104,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -17992,31 +19118,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 17999 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -18028,7 +19133,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -18037,7 +19142,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -18213,8 +19318,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -18222,8 +19327,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_GCJ= + if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ +@@ -18247,8 +19352,8 @@ + # directories. + hardcode_action_GCJ=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-echo "${ECHO_T}$hardcode_action_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6; } + + if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported +@@ -18400,9 +19505,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$GCC_GCJ + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -18536,11 +19638,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_predep_objects_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_predep_objects_GCJ + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_postdep_objects_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_postdep_objects_GCJ + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -18552,7 +19654,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -18632,7 +19734,7 @@ + link_all_deplibs=$link_all_deplibs_GCJ + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -18687,7 +19789,6 @@ + RC) + + +- + # Source file extension for RC test sources. + ac_ext=rc + +@@ -18884,9 +19985,6 @@ + # Is the compiler the GNU C compiler? + with_gcc=$GCC_RC + +-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` +-gcc_ver=\`gcc -dumpversion\` +- + # An ERE matcher. + EGREP=$lt_EGREP + +@@ -19020,11 +20118,11 @@ + + # Dependencies to place before the objects being linked to create a + # shared library. +-predep_objects=\`echo $lt_predep_objects_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++predep_objects=$lt_predep_objects_RC + + # Dependencies to place after the objects being linked to create a + # shared library. +-postdep_objects=\`echo $lt_postdep_objects_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++postdep_objects=$lt_postdep_objects_RC + + # Dependencies to place before the objects being linked to create a + # shared library. +@@ -19036,7 +20134,7 @@ + + # The library search path used internally by the compiler when linking + # a shared library. +-compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++compiler_lib_search_path=$lt_compiler_lib_search_path_RC + + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method +@@ -19116,7 +20214,7 @@ + link_all_deplibs=$link_all_deplibs_RC + + # Compile-time system search path for libraries +-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + + # Run-time system search path for libraries + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +@@ -19235,8 +20333,8 @@ + _ACEOF + + +- echo "$as_me:$LINENO: checking for gcc 3.3 version of gcov file format" >&5 +-echo $ECHO_N "checking for gcc 3.3 version of gcov file format... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for gcc 3.3 version of gcov file format" >&5 ++echo $ECHO_N "checking for gcc 3.3 version of gcov file format... $ECHO_C" >&6; } + have_gcc33_gcov=no + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +@@ -19261,13 +20359,22 @@ + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19278,8 +20385,10 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + if test x$have_gcc33_gcov = xyes ; then + + cat >>confdefs.h <<_ACEOF +@@ -19287,8 +20396,8 @@ + _ACEOF + + fi +- echo "$as_me:$LINENO: result: $have_gcc33_gcov" >&5 +-echo "${ECHO_T}$have_gcc33_gcov" >&6 ++ { echo "$as_me:$LINENO: result: $have_gcc33_gcov" >&5 ++echo "${ECHO_T}$have_gcc33_gcov" >&6; } + fi + + +@@ -19303,8 +20412,8 @@ + + #### Integer sizes + +-echo "$as_me:$LINENO: checking for char" >&5 +-echo $ECHO_N "checking for char... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for char" >&5 ++echo $ECHO_N "checking for char... $ECHO_C" >&6; } + if test "${ac_cv_type_char+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19315,36 +20424,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef char ac__type_new_; + int + main () + { +-if ((char *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (char)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19353,23 +20475,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_char=no ++ ac_cv_type_char=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5 +-echo "${ECHO_T}$ac_cv_type_char" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5 ++echo "${ECHO_T}$ac_cv_type_char" >&6; } + +-echo "$as_me:$LINENO: checking size of char" >&5 +-echo $ECHO_N "checking size of char... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of char" >&5 ++echo $ECHO_N "checking size of char... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_char+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_char" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -19379,10 +20501,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef char ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (char))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -19390,24 +20514,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19420,10 +20556,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef char ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -19431,24 +20569,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19457,30 +20607,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef char ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (char))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -19488,24 +20641,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19518,10 +20683,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef char ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (char))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -19529,24 +20696,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19555,24 +20734,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -19583,10 +20765,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef char ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -19594,24 +20778,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19620,26 +20816,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_char=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77 ++'') if test "$ac_cv_type_char" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (char) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (char), 77 ++echo "$as_me: error: cannot compute sizeof (char) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_char=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -19647,8 +20841,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (char)); } +-unsigned long ulongval () { return (long) (sizeof (char)); } ++ typedef char ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -19657,35 +20853,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (char))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (char)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (char)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19696,29 +20901,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77 ++if test "$ac_cv_type_char" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (char) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (char), 77 ++echo "$as_me: error: cannot compute sizeof (char) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_char=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_char=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_char" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_char" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_CHAR $ac_cv_sizeof_char + _ACEOF + + +-echo "$as_me:$LINENO: checking for short" >&5 +-echo $ECHO_N "checking for short... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for short" >&5 ++echo $ECHO_N "checking for short... $ECHO_C" >&6; } + if test "${ac_cv_type_short+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19729,36 +20937,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef short ac__type_new_; + int + main () + { +-if ((short *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (short)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19767,23 +20988,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_short=no ++ ac_cv_type_short=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5 +-echo "${ECHO_T}$ac_cv_type_short" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5 ++echo "${ECHO_T}$ac_cv_type_short" >&6; } + +-echo "$as_me:$LINENO: checking size of short" >&5 +-echo $ECHO_N "checking size of short... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of short" >&5 ++echo $ECHO_N "checking size of short... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_short+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_short" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -19793,10 +21014,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef short ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -19804,24 +21027,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19834,10 +21069,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef short ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -19845,24 +21082,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19871,30 +21120,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef short ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -19902,24 +21154,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19932,10 +21196,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef short ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -19943,24 +21209,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19969,24 +21247,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -19997,10 +21278,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef short ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20008,24 +21291,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20034,26 +21329,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_short=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77 ++'') if test "$ac_cv_type_short" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (short) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (short), 77 ++echo "$as_me: error: cannot compute sizeof (short) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_short=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -20061,8 +21354,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (short)); } +-unsigned long ulongval () { return (long) (sizeof (short)); } ++ typedef short ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -20071,35 +21366,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (short))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (short)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (short)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20110,29 +21414,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77 ++if test "$ac_cv_type_short" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (short) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (short), 77 ++echo "$as_me: error: cannot compute sizeof (short) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_short=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_short=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_short" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_short" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_SHORT $ac_cv_sizeof_short + _ACEOF + + +-echo "$as_me:$LINENO: checking for long" >&5 +-echo $ECHO_N "checking for long... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for long" >&5 ++echo $ECHO_N "checking for long... $ECHO_C" >&6; } + if test "${ac_cv_type_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20143,36 +21450,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef long ac__type_new_; + int + main () + { +-if ((long *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (long)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20181,23 +21501,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_long=no ++ ac_cv_type_long=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 +-echo "${ECHO_T}$ac_cv_type_long" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 ++echo "${ECHO_T}$ac_cv_type_long" >&6; } + +-echo "$as_me:$LINENO: checking size of long" >&5 +-echo $ECHO_N "checking size of long... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of long" >&5 ++echo $ECHO_N "checking size of long... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_long" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -20207,10 +21527,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -20218,24 +21540,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20248,10 +21582,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20259,24 +21595,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20285,30 +21633,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -20316,24 +21667,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20346,10 +21709,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20357,24 +21722,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20383,24 +21760,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -20411,10 +21791,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20422,24 +21804,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20448,26 +21842,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_long=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 ++'') if test "$ac_cv_type_long" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (long) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (long), 77 ++echo "$as_me: error: cannot compute sizeof (long) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_long=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -20475,8 +21867,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (long)); } +-unsigned long ulongval () { return (long) (sizeof (long)); } ++ typedef long ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -20485,35 +21879,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (long))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (long)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (long)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20524,29 +21927,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 ++if test "$ac_cv_type_long" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (long) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (long), 77 ++echo "$as_me: error: cannot compute sizeof (long) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_long=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_long=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_long" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_long" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_LONG $ac_cv_sizeof_long + _ACEOF + + +-echo "$as_me:$LINENO: checking for int" >&5 +-echo $ECHO_N "checking for int... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for int" >&5 ++echo $ECHO_N "checking for int... $ECHO_C" >&6; } + if test "${ac_cv_type_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20557,36 +21963,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef int ac__type_new_; + int + main () + { +-if ((int *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (int)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20595,23 +22014,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_int=no ++ ac_cv_type_int=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 +-echo "${ECHO_T}$ac_cv_type_int" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 ++echo "${ECHO_T}$ac_cv_type_int" >&6; } + +-echo "$as_me:$LINENO: checking size of int" >&5 +-echo $ECHO_N "checking size of int... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of int" >&5 ++echo $ECHO_N "checking size of int... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_int" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -20621,10 +22040,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef int ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -20632,24 +22053,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20662,10 +22095,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef int ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20673,24 +22108,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20699,30 +22146,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef int ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -20730,24 +22180,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20760,10 +22222,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef int ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20771,24 +22235,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20797,24 +22273,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -20825,10 +22304,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef int ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -20836,24 +22317,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20862,26 +22355,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_int=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 ++'') if test "$ac_cv_type_int" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (int) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (int), 77 ++echo "$as_me: error: cannot compute sizeof (int) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_int=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -20889,8 +22380,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (int)); } +-unsigned long ulongval () { return (long) (sizeof (int)); } ++ typedef int ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -20899,35 +22392,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (int))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (int)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (int)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20938,29 +22440,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 ++if test "$ac_cv_type_int" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (int) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (int), 77 ++echo "$as_me: error: cannot compute sizeof (int) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_int=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_int=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_int" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_int" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_INT $ac_cv_sizeof_int + _ACEOF + + +-echo "$as_me:$LINENO: checking for void *" >&5 +-echo $ECHO_N "checking for void *... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for void *" >&5 ++echo $ECHO_N "checking for void *... $ECHO_C" >&6; } + if test "${ac_cv_type_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20971,36 +22476,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef void * ac__type_new_; + int + main () + { +-if ((void * *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (void *)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21009,23 +22527,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_void_p=no ++ ac_cv_type_void_p=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5 +-echo "${ECHO_T}$ac_cv_type_void_p" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5 ++echo "${ECHO_T}$ac_cv_type_void_p" >&6; } + +-echo "$as_me:$LINENO: checking size of void *" >&5 +-echo $ECHO_N "checking size of void *... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of void *" >&5 ++echo $ECHO_N "checking size of void *... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_void_p" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -21035,10 +22553,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef void * ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -21046,24 +22566,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21076,10 +22608,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef void * ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21087,24 +22621,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21113,30 +22659,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef void * ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -21144,24 +22693,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21174,10 +22735,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef void * ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21185,24 +22748,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21211,24 +22786,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -21239,10 +22817,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef void * ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21250,24 +22830,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21276,26 +22868,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_void_p=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 ++'') if test "$ac_cv_type_void_p" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (void *), 77 ++echo "$as_me: error: cannot compute sizeof (void *) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_void_p=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21303,8 +22893,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (void *)); } +-unsigned long ulongval () { return (long) (sizeof (void *)); } ++ typedef void * ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -21313,35 +22905,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (void *))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (void *)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (void *)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21352,29 +22953,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 ++if test "$ac_cv_type_void_p" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (void *), 77 ++echo "$as_me: error: cannot compute sizeof (void *) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_void_p=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_void_p=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_VOID_P $ac_cv_sizeof_void_p + _ACEOF + + +-echo "$as_me:$LINENO: checking for long long" >&5 +-echo $ECHO_N "checking for long long... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for long long" >&5 ++echo $ECHO_N "checking for long long... $ECHO_C" >&6; } + if test "${ac_cv_type_long_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -21385,36 +22989,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef long long ac__type_new_; + int + main () + { +-if ((long long *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (long long)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21423,23 +23040,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_long_long=no ++ ac_cv_type_long_long=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5 +-echo "${ECHO_T}$ac_cv_type_long_long" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5 ++echo "${ECHO_T}$ac_cv_type_long_long" >&6; } + +-echo "$as_me:$LINENO: checking size of long long" >&5 +-echo $ECHO_N "checking size of long long... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of long long" >&5 ++echo $ECHO_N "checking size of long long... $ECHO_C" >&6; } + if test "${ac_cv_sizeof_long_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type_long_long" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -21449,10 +23066,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -21460,24 +23079,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21490,10 +23121,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21501,24 +23134,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21527,30 +23172,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long long))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -21558,24 +23206,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21588,10 +23248,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21599,24 +23261,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21625,24 +23299,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -21653,10 +23330,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef long long ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21664,24 +23343,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21690,26 +23381,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof_long_long=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77 ++'') if test "$ac_cv_type_long_long" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (long long), 77 ++echo "$as_me: error: cannot compute sizeof (long long) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_long_long=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21717,8 +23406,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (long long)); } +-unsigned long ulongval () { return (long) (sizeof (long long)); } ++ typedef long long ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -21727,35 +23418,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (long long))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (long long)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (long long)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21766,29 +23466,32 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77 ++if test "$ac_cv_type_long_long" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (long long), 77 ++echo "$as_me: error: cannot compute sizeof (long long) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof_long_long=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof_long_long=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5 +-echo "${ECHO_T}$ac_cv_sizeof_long_long" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5 ++echo "${ECHO_T}$ac_cv_sizeof_long_long" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long + _ACEOF + + +-echo "$as_me:$LINENO: checking for __int64" >&5 +-echo $ECHO_N "checking for __int64... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for __int64" >&5 ++echo $ECHO_N "checking for __int64... $ECHO_C" >&6; } + if test "${ac_cv_type___int64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -21799,36 +23502,49 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef __int64 ac__type_new_; + int + main () + { +-if ((__int64 *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (__int64)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21837,23 +23553,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type___int64=no ++ ac_cv_type___int64=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type___int64" >&5 +-echo "${ECHO_T}$ac_cv_type___int64" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type___int64" >&5 ++echo "${ECHO_T}$ac_cv_type___int64" >&6; } + +-echo "$as_me:$LINENO: checking size of __int64" >&5 +-echo $ECHO_N "checking size of __int64... $ECHO_C" >&6 ++# The cast to long int works around a bug in the HP C Compiler ++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects ++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. ++# This bug is HP SR number 8606223364. ++{ echo "$as_me:$LINENO: checking size of __int64" >&5 ++echo $ECHO_N "checking size of __int64... $ECHO_C" >&6; } + if test "${ac_cv_sizeof___int64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$ac_cv_type___int64" = yes; then +- # The cast to unsigned long works around a bug in the HP C Compiler +- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +- # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. + cat >conftest.$ac_ext <<_ACEOF +@@ -21863,10 +23579,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef __int64 ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)]; + test_array [0] = 0 + + ; +@@ -21874,24 +23592,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21904,10 +23634,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef __int64 ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -21915,24 +23647,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21941,30 +23685,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr $ac_mid + 1` +- if test $ac_lo -le $ac_mid; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid + 1` ++ ac_lo=`expr $ac_mid + 1` ++ if test $ac_lo -le $ac_mid; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef __int64 ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) < 0)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)]; + test_array [0] = 0 + + ; +@@ -21972,24 +23719,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22002,10 +23761,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef __int64 ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) >= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -22013,24 +23774,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22039,24 +23812,27 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_hi=`expr '(' $ac_mid ')' - 1` +- if test $ac_mid -le $ac_hi; then +- ac_lo= ac_hi= +- break +- fi +- ac_mid=`expr 2 '*' $ac_mid` ++ ac_hi=`expr '(' $ac_mid ')' - 1` ++ if test $ac_mid -le $ac_hi; then ++ ac_lo= ac_hi= ++ break ++ fi ++ ac_mid=`expr 2 '*' $ac_mid` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo= ac_hi= ++ ac_lo= ac_hi= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + # Binary search between lo and hi bounds. + while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` +@@ -22067,10 +23843,12 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++ typedef __int64 ac__type_sizeof_; ++ + int + main () + { +-static int test_array [1 - 2 * !(((long) (sizeof (__int64))) <= $ac_mid)]; ++static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)]; + test_array [0] = 0 + + ; +@@ -22078,24 +23856,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22104,26 +23894,24 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_lo=`expr '(' $ac_mid ')' + 1` ++ ac_lo=`expr '(' $ac_mid ')' + 1` + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + case $ac_lo in + ?*) ac_cv_sizeof___int64=$ac_lo;; +-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77 ++'') if test "$ac_cv_type___int64" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (__int64), 77 ++echo "$as_me: error: cannot compute sizeof (__int64) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ;; ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof___int64=0 ++ fi ;; + esac + else +- if test "$cross_compiling" = yes; then +- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run test program while cross compiling +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -22131,8 +23919,10 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default +-long longval () { return (long) (sizeof (__int64)); } +-unsigned long ulongval () { return (long) (sizeof (__int64)); } ++ typedef __int64 ac__type_sizeof_; ++ ++static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); } ++static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); } + #include + #include + int +@@ -22141,35 +23931,44 @@ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) +- exit (1); +- if (((long) (sizeof (__int64))) < 0) ++ return 1; ++ if (((long int) (sizeof (ac__type_sizeof_))) < 0) + { +- long i = longval (); +- if (i != ((long) (sizeof (__int64)))) +- exit (1); ++ long int i = longval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%ld\n", i); + } + else + { +- unsigned long i = ulongval (); +- if (i != ((long) (sizeof (__int64)))) +- exit (1); ++ unsigned long int i = ulongval (); ++ if (i != ((long int) (sizeof (ac__type_sizeof_)))) ++ return 1; + fprintf (f, "%lu\n", i); + } +- exit (ferror (f) || fclose (f) != 0); ++ return ferror (f) || fclose (f) != 0; + + ; + return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22180,22 +23979,25 @@ + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) +-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64), 77 ++if test "$ac_cv_type___int64" = yes; then ++ { { echo "$as_me:$LINENO: error: cannot compute sizeof (__int64) + See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute sizeof (__int64), 77 ++echo "$as_me: error: cannot compute sizeof (__int64) + See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ { (exit 77); exit 77; }; } ++ else ++ ac_cv_sizeof___int64=0 ++ fi + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + rm -f conftest.val +-else +- ac_cv_sizeof___int64=0 + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_sizeof___int64" >&5 +-echo "${ECHO_T}$ac_cv_sizeof___int64" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sizeof___int64" >&5 ++echo "${ECHO_T}$ac_cv_sizeof___int64" >&6; } ++ ++ ++ + cat >>confdefs.h <<_ACEOF + #define SIZEOF___INT64 $ac_cv_sizeof___int64 + _ACEOF +@@ -22203,8 +24005,8 @@ + + + ### See what our 64 bit type is called +-echo "$as_me:$LINENO: checking 64-bit integer type" >&5 +-echo $ECHO_N "checking 64-bit integer type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking 64-bit integer type" >&5 ++echo $ECHO_N "checking 64-bit integer type... $ECHO_C" >&6; } + + case 8 in + $ac_cv_sizeof_int) +@@ -22234,15 +24036,15 @@ + DBUS_HAVE_INT64=0 + DBUS_INT64_CONSTANT= + DBUS_UINT64_CONSTANT= +- echo "$as_me:$LINENO: result: none found" >&5 +-echo "${ECHO_T}none found" >&6 ++ { echo "$as_me:$LINENO: result: none found" >&5 ++echo "${ECHO_T}none found" >&6; } + else + DBUS_INT64_TYPE="$dbusint64" + DBUS_HAVE_INT64=1 + DBUS_INT64_CONSTANT="$dbusint64_constant" + DBUS_UINT64_CONSTANT="$dbusuint64_constant" +- echo "$as_me:$LINENO: result: $DBUS_INT64_TYPE" >&5 +-echo "${ECHO_T}$DBUS_INT64_TYPE" >&6 ++ { echo "$as_me:$LINENO: result: $DBUS_INT64_TYPE" >&5 ++echo "${ECHO_T}$DBUS_INT64_TYPE" >&6; } + fi + + +@@ -22251,8 +24053,8 @@ + + + ### see what 32-bit int is called +-echo "$as_me:$LINENO: checking 32-bit integer type" >&5 +-echo $ECHO_N "checking 32-bit integer type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking 32-bit integer type" >&5 ++echo $ECHO_N "checking 32-bit integer type... $ECHO_C" >&6; } + + case 4 in + $ac_cv_sizeof_short) +@@ -22273,15 +24075,15 @@ + { (exit 1); exit 1; }; } + else + DBUS_INT32_TYPE="$dbusint32" +- echo "$as_me:$LINENO: result: $DBUS_INT32_TYPE" >&5 +-echo "${ECHO_T}$DBUS_INT32_TYPE" >&6 ++ { echo "$as_me:$LINENO: result: $DBUS_INT32_TYPE" >&5 ++echo "${ECHO_T}$DBUS_INT32_TYPE" >&6; } + fi + + + + ### see what 16-bit int is called +-echo "$as_me:$LINENO: checking 16-bit integer type" >&5 +-echo $ECHO_N "checking 16-bit integer type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking 16-bit integer type" >&5 ++echo $ECHO_N "checking 16-bit integer type... $ECHO_C" >&6; } + + case 2 in + $ac_cv_sizeof_short) +@@ -22299,8 +24101,8 @@ + { (exit 1); exit 1; }; } + else + DBUS_INT16_TYPE="$dbusint16" +- echo "$as_me:$LINENO: result: $DBUS_INT16_TYPE" >&5 +-echo "${ECHO_T}$DBUS_INT16_TYPE" >&6 ++ { echo "$as_me:$LINENO: result: $DBUS_INT16_TYPE" >&5 ++echo "${ECHO_T}$DBUS_INT16_TYPE" >&6; } + fi + + +@@ -22314,8 +24116,8 @@ + + ;; + *) +- echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 ++echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; } + if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22332,7 +24134,8 @@ + int + main () + { +-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN ++#if ! (defined BYTE_ORDER && defined BIG_ENDIAN && defined LITTLE_ENDIAN \ ++ && BYTE_ORDER && BIG_ENDIAN && LITTLE_ENDIAN) + bogus endian macros + #endif + +@@ -22341,24 +24144,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22384,24 +24199,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22410,14 +24237,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_c_bigendian=no ++ ac_cv_c_bigendian=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-# It does not; compile a test program. ++ # It does not; compile a test program. + if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown +@@ -22427,11 +24255,11 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; ++short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; ++short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; ++short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; ++short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } + int + main () +@@ -22442,24 +24270,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22478,8 +24318,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -22487,27 +24329,41 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++$ac_includes_default + int + main () + { ++ + /* Are we little or big endian? From Harbison&Steele. */ + union + { +- long l; +- char c[sizeof (long)]; ++ long int l; ++ char c[sizeof (long int)]; + } u; + u.l = 1; +- exit (u.c[sizeof (long) - 1] == 1); ++ return u.c[sizeof (long int) - 1] == 1; ++ ++ ; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22520,13 +24376,16 @@ + ( exit $ac_status ) + ac_cv_c_bigendian=yes + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +-echo "${ECHO_T}$ac_cv_c_bigendian" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 ++echo "${ECHO_T}$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in + yes) + +@@ -22547,8 +24406,8 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking for an implementation of va_copy()" >&5 +-echo $ECHO_N "checking for an implementation of va_copy()... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for an implementation of va_copy()" >&5 ++echo $ECHO_N "checking for an implementation of va_copy()... $ECHO_C" >&6; } + if test "${dbus_cv_va_copy+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22569,24 +24428,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22595,16 +24466,17 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_cv_va_copy=no ++ dbus_cv_va_copy=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $dbus_cv_va_copy" >&5 +-echo "${ECHO_T}$dbus_cv_va_copy" >&6 +-echo "$as_me:$LINENO: checking for an implementation of __va_copy()" >&5 +-echo $ECHO_N "checking for an implementation of __va_copy()... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: result: $dbus_cv_va_copy" >&5 ++echo "${ECHO_T}$dbus_cv_va_copy" >&6; } ++{ echo "$as_me:$LINENO: checking for an implementation of __va_copy()" >&5 ++echo $ECHO_N "checking for an implementation of __va_copy()... $ECHO_C" >&6; } + if test "${dbus_cv___va_copy+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22625,24 +24497,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22651,14 +24535,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_cv___va_copy=no ++ dbus_cv___va_copy=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $dbus_cv___va_copy" >&5 +-echo "${ECHO_T}$dbus_cv___va_copy" >&6 ++{ echo "$as_me:$LINENO: result: $dbus_cv___va_copy" >&5 ++echo "${ECHO_T}$dbus_cv___va_copy" >&6; } + + if test "x$dbus_cv_va_copy" = "xyes"; then + dbus_va_copy_func=va_copy +@@ -22681,8 +24566,8 @@ + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-echo "$as_me:$LINENO: checking whether va_lists can be copied by value" >&5 +-echo $ECHO_N "checking whether va_lists can be copied by value... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether va_lists can be copied by value" >&5 ++echo $ECHO_N "checking whether va_lists can be copied by value... $ECHO_C" >&6; } + if test "${dbus_cv_va_val_copy+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22720,13 +24605,22 @@ + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22739,12 +24633,14 @@ + ( exit $ac_status ) + dbus_cv_va_val_copy=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + ++ ++ + fi +-echo "$as_me:$LINENO: result: $dbus_cv_va_val_copy" >&5 +-echo "${ECHO_T}$dbus_cv_va_val_copy" >&6 ++{ echo "$as_me:$LINENO: result: $dbus_cv_va_val_copy" >&5 ++echo "${ECHO_T}$dbus_cv_va_val_copy" >&6; } + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -22762,32 +24658,32 @@ + + + #### Atomic integers (checks by Sebastian Wilhelmi for GLib) +-echo "$as_me:$LINENO: checking whether to use inline assembler routines for atomic integers" >&5 +-echo $ECHO_N "checking whether to use inline assembler routines for atomic integers... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to use inline assembler routines for atomic integers" >&5 ++echo $ECHO_N "checking whether to use inline assembler routines for atomic integers... $ECHO_C" >&6; } + have_atomic_inc=no + if test x"$GCC" = xyes; then + if test "x$enable_ansi" = "xyes"; then +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + else + case $host_cpu in + i386) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + i?86) + case $host_os in + darwin*) +- echo "$as_me:$LINENO: result: darwin" >&5 +-echo "${ECHO_T}darwin" >&6 ++ { echo "$as_me:$LINENO: result: darwin" >&5 ++echo "${ECHO_T}darwin" >&6; } + # check at compile-time, so that it is possible to build universal + # (with multiple architectures at once on the compile line) + + + ;; + *) +- echo "$as_me:$LINENO: result: i486" >&5 +-echo "${ECHO_T}i486" >&6 ++ { echo "$as_me:$LINENO: result: i486" >&5 ++echo "${ECHO_T}i486" >&6; } + + cat >>confdefs.h <<_ACEOF + #define DBUS_USE_ATOMIC_INT_486 1 +@@ -22798,8 +24694,8 @@ + have_atomic_inc=yes + ;; + *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + esac + fi +@@ -22822,8 +24718,8 @@ + + #### Various functions + +-echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +-echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 ++echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22836,40 +24732,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char socket (); + int + main () + { +-socket (); ++return socket (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22878,14 +24786,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_socket_socket=no ++ ac_cv_lib_socket_socket=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6; } + if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBSOCKET 1 +@@ -22895,8 +24804,8 @@ + + fi + +-echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } + if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -22923,53 +24832,59 @@ + + #undef gethostbyname + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) ++#if defined __stub_gethostbyname || defined __stub___gethostbyname + choke me +-#else +-char (*f) () = gethostbyname; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != gethostbyname; ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -22978,19 +24893,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_gethostbyname=no ++ ac_cv_func_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + if test $ac_cv_func_gethostbyname = yes; then + : + else + +-echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -23003,40 +24919,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + int + main () + { +-gethostbyname (); ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23045,14 +24973,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_gethostbyname=no ++ ac_cv_lib_nsl_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } + if test $ac_cv_lib_nsl_gethostbyname = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBNSL 1 +@@ -23078,9 +25007,9 @@ + for ac_func in vsnprintf vasprintf nanosleep usleep poll setenv unsetenv socketpair getgrouplist fpathconf + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -23106,53 +25035,59 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23161,13 +25096,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -23177,8 +25114,8 @@ + done + + +-echo "$as_me:$LINENO: checking for dirfd" >&5 +-echo $ECHO_N "checking for dirfd... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for dirfd" >&5 ++echo $ECHO_N "checking for dirfd... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23203,24 +25140,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23229,12 +25178,13 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_dirfd=no ++ dbus_have_dirfd=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $dbus_have_dirfd" >&5 +-echo "${ECHO_T}$dbus_have_dirfd" >&6 ++{ echo "$as_me:$LINENO: result: $dbus_have_dirfd" >&5 ++echo "${ECHO_T}$dbus_have_dirfd" >&6; } + if test "$dbus_have_dirfd" = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -23242,8 +25192,8 @@ + _ACEOF + + else +- echo "$as_me:$LINENO: checking for DIR *dirp->dd_fd" >&5 +-echo $ECHO_N "checking for DIR *dirp->dd_fd... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for DIR *dirp->dd_fd" >&5 ++echo $ECHO_N "checking for DIR *dirp->dd_fd... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23269,24 +25219,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23295,12 +25257,13 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_ddfd=no ++ dbus_have_ddfd=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +- echo "$as_me:$LINENO: result: $dbus_have_ddfd" >&5 +-echo "${ECHO_T}$dbus_have_ddfd" >&6 ++ { echo "$as_me:$LINENO: result: $dbus_have_ddfd" >&5 ++echo "${ECHO_T}$dbus_have_ddfd" >&6; } + if test "$dbus_have_ddfd" = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -23314,18 +25277,19 @@ + for ac_header in execinfo.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23336,24 +25300,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23362,15 +25338,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23379,8 +25356,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -23404,9 +25386,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -23430,25 +25413,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -23459,9 +25436,9 @@ + for ac_func in backtrace + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -23487,53 +25464,59 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23542,13 +25525,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -23566,18 +25551,19 @@ + for ac_header in errno.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23588,24 +25574,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23614,15 +25612,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23631,8 +25630,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -23656,9 +25660,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -23682,25 +25687,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -23724,8 +25723,8 @@ + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-echo "$as_me:$LINENO: checking for posix getpwnam_r" >&5 +-echo $ECHO_N "checking for posix getpwnam_r... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for posix getpwnam_r" >&5 ++echo $ECHO_N "checking for posix getpwnam_r... $ECHO_C" >&6; } + if test "${ac_cv_func_posix_getpwnam_r+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -23761,13 +25760,22 @@ + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23780,11 +25788,13 @@ + ( exit $ac_status ) + ac_cv_func_posix_getpwnam_r=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_posix_getpwnam_r" >&5 +-echo "${ECHO_T}$ac_cv_func_posix_getpwnam_r" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_posix_getpwnam_r" >&5 ++echo "${ECHO_T}$ac_cv_func_posix_getpwnam_r" >&6; } + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -23799,8 +25809,8 @@ + _ACEOF + + else +- echo "$as_me:$LINENO: checking for nonposix getpwnam_r" >&5 +-echo $ECHO_N "checking for nonposix getpwnam_r... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for nonposix getpwnam_r" >&5 ++echo $ECHO_N "checking for nonposix getpwnam_r... $ECHO_C" >&6; } + if test "${ac_cv_func_nonposix_getpwnam_r+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -23823,24 +25833,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23849,13 +25871,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_nonposix_getpwnam_r=no ++ ac_cv_func_nonposix_getpwnam_r=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_nonposix_getpwnam_r" >&5 +-echo "${ECHO_T}$ac_cv_func_nonposix_getpwnam_r" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_nonposix_getpwnam_r" >&5 ++echo "${ECHO_T}$ac_cv_func_nonposix_getpwnam_r" >&6; } + if test "$ac_cv_func_nonposix_getpwnam_r" = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -23865,8 +25888,8 @@ + fi + fi + +-echo "$as_me:$LINENO: checking whether socklen_t is defined" >&5 +-echo $ECHO_N "checking whether socklen_t is defined... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether socklen_t is defined" >&5 ++echo $ECHO_N "checking whether socklen_t is defined... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23890,24 +25913,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23916,11 +25951,12 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_socklen_t=no ++ dbus_have_socklen_t=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $dbus_have_socklen_t" >&5 +-echo "${ECHO_T}$dbus_have_socklen_t" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $dbus_have_socklen_t" >&5 ++echo "${ECHO_T}$dbus_have_socklen_t" >&6; } + + if test "x$dbus_have_socklen_t" = "xyes"; then + +@@ -23934,18 +25970,19 @@ + for ac_header in sys/uio.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23956,24 +25993,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -23982,15 +26031,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23999,8 +26049,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -24024,9 +26079,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -24050,25 +26106,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -24079,9 +26129,9 @@ + for ac_func in writev + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -24107,53 +26157,59 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24162,13 +26218,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -24186,18 +26244,19 @@ + for ac_header in sys/syslimits.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24208,24 +26267,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24234,15 +26305,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24251,8 +26323,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -24276,9 +26353,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -24302,25 +26380,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -24333,8 +26405,8 @@ + done + + +-echo "$as_me:$LINENO: checking for ISO C99 varargs macros in C" >&5 +-echo $ECHO_N "checking for ISO C99 varargs macros in C... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ISO C99 varargs macros in C" >&5 ++echo $ECHO_N "checking for ISO C99 varargs macros in C... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24355,24 +26427,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24381,14 +26465,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_iso_c_varargs=no ++ dbus_have_iso_c_varargs=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $dbus_have_iso_c_varargs" >&5 +-echo "${ECHO_T}$dbus_have_iso_c_varargs" >&6 + +-echo "$as_me:$LINENO: checking for GNUC varargs macros" >&5 +-echo $ECHO_N "checking for GNUC varargs macros... $ECHO_C" >&6 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $dbus_have_iso_c_varargs" >&5 ++echo "${ECHO_T}$dbus_have_iso_c_varargs" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for GNUC varargs macros" >&5 ++echo $ECHO_N "checking for GNUC varargs macros... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24409,24 +26494,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24435,11 +26532,12 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_gnuc_varargs=no ++ dbus_have_gnuc_varargs=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $dbus_have_gnuc_varargs" >&5 +-echo "${ECHO_T}$dbus_have_gnuc_varargs" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $dbus_have_gnuc_varargs" >&5 ++echo "${ECHO_T}$dbus_have_gnuc_varargs" >&6; } + + if test x$dbus_have_iso_c_varargs = xyes; then + +@@ -24456,8 +26554,8 @@ + + fi + +-echo "$as_me:$LINENO: checking for struct cmsgcred" >&5 +-echo $ECHO_N "checking for struct cmsgcred... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct cmsgcred" >&5 ++echo $ECHO_N "checking for struct cmsgcred... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24481,24 +26579,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24507,11 +26617,12 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-dbus_have_struct_cmsgcred=no ++ dbus_have_struct_cmsgcred=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $dbus_have_struct_cmsgcred" >&5 +-echo "${ECHO_T}$dbus_have_struct_cmsgcred" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $dbus_have_struct_cmsgcred" >&5 ++echo "${ECHO_T}$dbus_have_struct_cmsgcred" >&6; } + + if test x$dbus_have_struct_cmsgcred = xyes; then + +@@ -24526,9 +26637,9 @@ + for ac_func in getpeerucred getpeereid + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -24554,53 +26665,59 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24609,13 +26726,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -24633,8 +26752,8 @@ + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-echo "$as_me:$LINENO: checking abstract socket namespace" >&5 +-echo $ECHO_N "checking abstract socket namespace... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking abstract socket namespace" >&5 ++echo $ECHO_N "checking abstract socket namespace... $ECHO_C" >&6; } + if test "${ac_cv_have_abstract_sockets+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -24694,13 +26813,22 @@ + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24714,11 +26842,13 @@ + ac_cv_have_abstract_sockets=no + + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-echo "$as_me:$LINENO: result: $ac_cv_have_abstract_sockets" >&5 +-echo "${ECHO_T}$ac_cv_have_abstract_sockets" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_abstract_sockets" >&5 ++echo "${ECHO_T}$ac_cv_have_abstract_sockets" >&6; } + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -24756,8 +26886,8 @@ + #### Sort out XML library + + # see what we have +-echo "$as_me:$LINENO: checking for XML_ParserCreate_MM in -lexpat" >&5 +-echo $ECHO_N "checking for XML_ParserCreate_MM in -lexpat... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for XML_ParserCreate_MM in -lexpat" >&5 ++echo $ECHO_N "checking for XML_ParserCreate_MM in -lexpat... $ECHO_C" >&6; } + if test "${ac_cv_lib_expat_XML_ParserCreate_MM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -24770,40 +26900,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char XML_ParserCreate_MM (); + int + main () + { +-XML_ParserCreate_MM (); ++return XML_ParserCreate_MM (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24812,31 +26954,33 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_expat_XML_ParserCreate_MM=no ++ ac_cv_lib_expat_XML_ParserCreate_MM=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_expat_XML_ParserCreate_MM" >&5 +-echo "${ECHO_T}$ac_cv_lib_expat_XML_ParserCreate_MM" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_expat_XML_ParserCreate_MM" >&5 ++echo "${ECHO_T}$ac_cv_lib_expat_XML_ParserCreate_MM" >&6; } + if test $ac_cv_lib_expat_XML_ParserCreate_MM = yes; then + + for ac_header in expat.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24847,24 +26991,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -24873,15 +27029,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24890,8 +27047,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -24915,9 +27077,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -24941,25 +27104,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -24984,8 +27141,8 @@ + if test -z "$PKG_CONFIG"; then + # Extract the first word of "pkg-config", so it can be a program name with args. + set dummy pkg-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PKG_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25000,28 +27157,29 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" + ;; + esac + fi + PKG_CONFIG=$ac_cv_path_PKG_CONFIG +- + if test -n "$PKG_CONFIG"; then +- echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +-echo "${ECHO_T}$PKG_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + + if test "$PKG_CONFIG" = "no" ; then +@@ -25032,25 +27190,25 @@ + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then +- echo "$as_me:$LINENO: checking for libxml-2.0 >= 2.6.0" >&5 +-echo $ECHO_N "checking for libxml-2.0 >= 2.6.0... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for libxml-2.0 >= 2.6.0" >&5 ++echo $ECHO_N "checking for libxml-2.0 >= 2.6.0... $ECHO_C" >&6; } + + if $PKG_CONFIG --exists "libxml-2.0 >= 2.6.0" ; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + succeeded=yes + +- echo "$as_me:$LINENO: checking LIBXML_CFLAGS" >&5 +-echo $ECHO_N "checking LIBXML_CFLAGS... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking LIBXML_CFLAGS" >&5 ++echo $ECHO_N "checking LIBXML_CFLAGS... $ECHO_C" >&6; } + LIBXML_CFLAGS=`$PKG_CONFIG --cflags "libxml-2.0 >= 2.6.0"` +- echo "$as_me:$LINENO: result: $LIBXML_CFLAGS" >&5 +-echo "${ECHO_T}$LIBXML_CFLAGS" >&6 ++ { echo "$as_me:$LINENO: result: $LIBXML_CFLAGS" >&5 ++echo "${ECHO_T}$LIBXML_CFLAGS" >&6; } + +- echo "$as_me:$LINENO: checking LIBXML_LIBS" >&5 +-echo $ECHO_N "checking LIBXML_LIBS... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking LIBXML_LIBS" >&5 ++echo $ECHO_N "checking LIBXML_LIBS... $ECHO_C" >&6; } + LIBXML_LIBS=`$PKG_CONFIG --libs "libxml-2.0 >= 2.6.0"` +- echo "$as_me:$LINENO: result: $LIBXML_LIBS" >&5 +-echo "${ECHO_T}$LIBXML_LIBS" >&6 ++ { echo "$as_me:$LINENO: result: $LIBXML_LIBS" >&5 ++echo "${ECHO_T}$LIBXML_LIBS" >&6; } + else + LIBXML_CFLAGS="" + LIBXML_LIBS="" +@@ -25140,8 +27298,8 @@ + fi + + # Thread lib detection +-echo "$as_me:$LINENO: checking for pthread_cond_timedwait" >&5 +-echo $ECHO_N "checking for pthread_cond_timedwait... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for pthread_cond_timedwait" >&5 ++echo $ECHO_N "checking for pthread_cond_timedwait... $ECHO_C" >&6; } + if test "${ac_cv_func_pthread_cond_timedwait+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25168,53 +27326,59 @@ + + #undef pthread_cond_timedwait + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pthread_cond_timedwait (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_pthread_cond_timedwait) || defined (__stub___pthread_cond_timedwait) ++#if defined __stub_pthread_cond_timedwait || defined __stub___pthread_cond_timedwait + choke me +-#else +-char (*f) () = pthread_cond_timedwait; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != pthread_cond_timedwait; ++return pthread_cond_timedwait (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25223,18 +27387,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_pthread_cond_timedwait=no ++ ac_cv_func_pthread_cond_timedwait=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_pthread_cond_timedwait" >&5 +-echo "${ECHO_T}$ac_cv_func_pthread_cond_timedwait" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_pthread_cond_timedwait" >&5 ++echo "${ECHO_T}$ac_cv_func_pthread_cond_timedwait" >&6; } + if test $ac_cv_func_pthread_cond_timedwait = yes; then + : + else +- echo "$as_me:$LINENO: checking for pthread_cond_timedwait in -lpthread" >&5 +-echo $ECHO_N "checking for pthread_cond_timedwait in -lpthread... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for pthread_cond_timedwait in -lpthread" >&5 ++echo $ECHO_N "checking for pthread_cond_timedwait in -lpthread... $ECHO_C" >&6; } + if test "${ac_cv_lib_pthread_pthread_cond_timedwait+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25247,40 +27412,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pthread_cond_timedwait (); + int + main () + { +-pthread_cond_timedwait (); ++return pthread_cond_timedwait (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25289,14 +27466,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_pthread_pthread_cond_timedwait=no ++ ac_cv_lib_pthread_pthread_cond_timedwait=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_cond_timedwait" >&5 +-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_cond_timedwait" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_cond_timedwait" >&5 ++echo "${ECHO_T}$ac_cv_lib_pthread_pthread_cond_timedwait" >&6; } + if test $ac_cv_lib_pthread_pthread_cond_timedwait = yes; then + THREAD_LIBS="-lpthread" + fi +@@ -25309,8 +27487,8 @@ + have_selinux=no; + else + # See if we have SELinux library +- echo "$as_me:$LINENO: checking for is_selinux_enabled in -lselinux" >&5 +-echo $ECHO_N "checking for is_selinux_enabled in -lselinux... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for is_selinux_enabled in -lselinux" >&5 ++echo $ECHO_N "checking for is_selinux_enabled in -lselinux... $ECHO_C" >&6; } + if test "${ac_cv_lib_selinux_is_selinux_enabled+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25323,40 +27501,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char is_selinux_enabled (); + int + main () + { +-is_selinux_enabled (); ++return is_selinux_enabled (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25365,14 +27555,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_selinux_is_selinux_enabled=no ++ ac_cv_lib_selinux_is_selinux_enabled=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_selinux_is_selinux_enabled" >&5 +-echo "${ECHO_T}$ac_cv_lib_selinux_is_selinux_enabled" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_selinux_is_selinux_enabled" >&5 ++echo "${ECHO_T}$ac_cv_lib_selinux_is_selinux_enabled" >&6; } + if test $ac_cv_lib_selinux_is_selinux_enabled = yes; then + have_selinux=yes + else +@@ -25382,8 +27573,8 @@ + + # see if we have the SELinux header with the new D-Bus stuff in it + if test x$have_selinux = xyes ; then +- echo "$as_me:$LINENO: checking for DBUS Flask permissions in selinux/av_permissions.h" >&5 +-echo $ECHO_N "checking for DBUS Flask permissions in selinux/av_permissions.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for DBUS Flask permissions in selinux/av_permissions.h" >&5 ++echo $ECHO_N "checking for DBUS Flask permissions in selinux/av_permissions.h... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25403,24 +27594,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25429,11 +27632,12 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-have_selinux=no ++ have_selinux=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- echo "$as_me:$LINENO: result: $have_selinux" >&5 +-echo "${ECHO_T}$have_selinux" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ { echo "$as_me:$LINENO: result: $have_selinux" >&5 ++echo "${ECHO_T}$have_selinux" >&6; } + fi + + if test x$enable_selinux = xauto ; then +@@ -25464,8 +27668,8 @@ + if test x$have_selinux = xyes ; then + # the selinux code creates threads + # which requires libpthread even on linux +- echo "$as_me:$LINENO: checking for pthread_create" >&5 +-echo $ECHO_N "checking for pthread_create... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for pthread_create" >&5 ++echo $ECHO_N "checking for pthread_create... $ECHO_C" >&6; } + if test "${ac_cv_func_pthread_create+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25492,53 +27696,59 @@ + + #undef pthread_create + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pthread_create (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_pthread_create) || defined (__stub___pthread_create) ++#if defined __stub_pthread_create || defined __stub___pthread_create + choke me +-#else +-char (*f) () = pthread_create; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != pthread_create; ++return pthread_create (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25547,18 +27757,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_pthread_create=no ++ ac_cv_func_pthread_create=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_pthread_create" >&5 +-echo "${ECHO_T}$ac_cv_func_pthread_create" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_pthread_create" >&5 ++echo "${ECHO_T}$ac_cv_func_pthread_create" >&6; } + if test $ac_cv_func_pthread_create = yes; then + : + else +- echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5 +-echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5 ++echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6; } + if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25571,40 +27782,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pthread_create (); + int + main () + { +-pthread_create (); ++return pthread_create (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25613,14 +27836,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_pthread_pthread_create=no ++ ac_cv_lib_pthread_pthread_create=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5 +-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5 ++echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6; } + if test $ac_cv_lib_pthread_pthread_create = yes; then + SELINUX_THREAD_LIBS="-lpthread" + fi +@@ -25674,17 +27898,17 @@ + else + have_kqueue=yes + if test "${ac_cv_header_sys_event_h+set}" = set; then +- echo "$as_me:$LINENO: checking for sys/event.h" >&5 +-echo $ECHO_N "checking for sys/event.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for sys/event.h" >&5 ++echo $ECHO_N "checking for sys/event.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_event_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_event_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_event_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking sys/event.h usability" >&5 +-echo $ECHO_N "checking sys/event.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/event.h usability" >&5 ++echo $ECHO_N "checking sys/event.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25695,24 +27919,36 @@ + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25721,15 +27957,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking sys/event.h presence" >&5 +-echo $ECHO_N "checking sys/event.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking sys/event.h presence" >&5 ++echo $ECHO_N "checking sys/event.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -25738,8 +27975,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -25763,9 +28005,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -25789,25 +28032,18 @@ + echo "$as_me: WARNING: sys/event.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/event.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: sys/event.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for sys/event.h" >&5 +-echo $ECHO_N "checking for sys/event.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for sys/event.h" >&5 ++echo $ECHO_N "checking for sys/event.h... $ECHO_C" >&6; } + if test "${ac_cv_header_sys_event_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_sys_event_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_event_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5 ++echo "${ECHO_T}$ac_cv_header_sys_event_h" >&6; } + + fi + if test $ac_cv_header_sys_event_h = yes; then +@@ -25817,8 +28053,8 @@ + fi + + +- echo "$as_me:$LINENO: checking for kqueue" >&5 +-echo $ECHO_N "checking for kqueue... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for kqueue" >&5 ++echo $ECHO_N "checking for kqueue... $ECHO_C" >&6; } + if test "${ac_cv_func_kqueue+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -25845,53 +28081,59 @@ + + #undef kqueue + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char kqueue (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_kqueue) || defined (__stub___kqueue) ++#if defined __stub_kqueue || defined __stub___kqueue + choke me +-#else +-char (*f) () = kqueue; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != kqueue; ++return kqueue (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -25900,13 +28142,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_kqueue=no ++ ac_cv_func_kqueue=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_kqueue" >&5 +-echo "${ECHO_T}$ac_cv_func_kqueue" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_kqueue" >&5 ++echo "${ECHO_T}$ac_cv_func_kqueue" >&6; } + if test $ac_cv_func_kqueue = yes; then + : + else +@@ -25985,44 +28228,49 @@ + + + ### X11 detection +-echo "$as_me:$LINENO: checking for X" >&5 +-echo $ECHO_N "checking for X... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } + + +-# Check whether --with-x or --without-x was given. ++# Check whether --with-x was given. + if test "${with_x+set}" = set; then +- withval="$with_x" ++ withval=$with_x; ++fi + +-fi; + # $have_x is `yes', `no', `disabled', or empty when we do not yet know. + if test "x$with_x" = xno; then + # The user explicitly disabled X. + have_x=disabled + else +- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then +- # Both variables are already set. +- have_x=yes +- else +- if test "${ac_cv_have_x+set}" = set; then ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # One or both of the vars are not set, and there is no cached value. + ac_x_includes=no ac_x_libraries=no +-rm -fr conftest.dir ++rm -f -r conftest.dir + if mkdir conftest.dir; then + cd conftest.dir +- # Make sure to not put "make" in the Imakefile rules, since we grep it out. + cat >Imakefile <<'_ACEOF' +-acfindx: +- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' + _ACEOF +- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. + for ac_extension in a so sl; do +- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && +- test -f $ac_im_libdir/libX11.$ac_extension; then ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then + ac_im_usrlibdir=$ac_im_libdir; break + fi + done +@@ -26030,7 +28278,7 @@ + # bogus both because they are the default anyway, and because + # using them would break gcc on systems where it needs fixed includes. + case $ac_im_incroot in +- /usr/include) ;; ++ /usr/include) ac_x_includes= ;; + *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; + esac + case $ac_im_usrlibdir in +@@ -26039,7 +28287,7 @@ + esac + fi + cd .. +- rm -fr conftest.dir ++ rm -f -r conftest.dir + fi + + # Standard set of common directories for X headers. +@@ -26090,8 +28338,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -26121,6 +28374,7 @@ + fi + done + fi ++ + rm -f conftest.err conftest.$ac_ext + fi # $ac_x_includes = no + +@@ -26146,24 +28400,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26174,49 +28440,54 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-LIBS=$ac_save_LIBS ++ LIBS=$ac_save_LIBS + for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + do + # Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do +- if test -r $ac_dir/libXt.$ac_extension; then ++ if test -r "$ac_dir/libX11.$ac_extension"; then + ac_x_libraries=$ac_dir + break 2 + fi + done + done + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi # $ac_x_libraries = no + +-if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then +- # Didn't find X anywhere. Cache the known absence of X. +- ac_cv_have_x="have_x=no" +-else +- # Record where we found X for the cache. +- ac_cv_have_x="have_x=yes \ +- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" +-fi ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac + fi +- +- fi ++;; #( ++ *) have_x=yes;; ++ esac + eval "$ac_cv_have_x" + fi # $with_x != no + + if test "$have_x" != yes; then +- echo "$as_me:$LINENO: result: $have_x" >&5 +-echo "${ECHO_T}$have_x" >&6 ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } + no_x=yes + else + # If each of the values was on the command line, it overrides each guess. + test "x$x_includes" = xNONE && x_includes=$ac_x_includes + test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries + # Update the cache value to reflect the command line values. +- ac_cv_have_x="have_x=yes \ +- ac_x_includes=$x_includes ac_x_libraries=$x_libraries" +- echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +-echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } + fi + + if test "$no_x" = yes; then +@@ -26237,12 +28508,12 @@ + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . +- case `(uname -sr) 2>/dev/null` in +- "SunOS 5"*) +- echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 +-echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 +- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" +- cat >conftest.$ac_ext <<_ACEOF ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -26258,43 +28529,48 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_R_nospace=yes ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_R_nospace=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- if test $ac_R_nospace = yes; then +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- X_LIBS="$X_LIBS -R$x_libraries" +- else + LIBS="$ac_xsave_LIBS -R $x_libraries" +- cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -26310,47 +28586,58 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_R_space=yes ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_R_space=no ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +- if test $ac_R_space = yes; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- X_LIBS="$X_LIBS -R $x_libraries" +- else +- echo "$as_me:$LINENO: result: neither works" >&5 +-echo "${ECHO_T}neither works" >&6 +- fi +- fi +- LIBS=$ac_xsave_LIBS +- esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS + fi + + # Check for system-dependent libraries X programs must link with. +@@ -26371,40 +28658,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char XOpenDisplay (); + int + main () + { +-XOpenDisplay (); ++return XOpenDisplay (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26413,8 +28712,8 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 +-echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } + if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26427,40 +28726,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dnet_ntoa (); + int + main () + { +-dnet_ntoa (); ++return dnet_ntoa (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26469,21 +28780,22 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dnet_dnet_ntoa=no ++ ac_cv_lib_dnet_dnet_ntoa=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +-echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } + if test $ac_cv_lib_dnet_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" + fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 +-echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } + if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26496,40 +28808,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dnet_ntoa (); + int + main () + { +-dnet_ntoa (); ++return dnet_ntoa (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26538,21 +28862,23 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dnet_stub_dnet_ntoa=no ++ ac_cv_lib_dnet_stub_dnet_ntoa=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +-echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } + if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" + fi + + fi + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$ac_xsave_LIBS" + +@@ -26564,8 +28890,8 @@ + # on Irix 5.2, according to T.E. Dickey. + # The functions gethostbyname, getservbyname, and inet_addr are + # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. +- echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } + if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26592,53 +28918,59 @@ + + #undef gethostbyname + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) ++#if defined __stub_gethostbyname || defined __stub___gethostbyname + choke me +-#else +-char (*f) () = gethostbyname; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != gethostbyname; ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26647,17 +28979,18 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_gethostbyname=no ++ ac_cv_func_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + + if test $ac_cv_func_gethostbyname = no; then +- echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26670,40 +29003,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + int + main () + { +-gethostbyname (); ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26712,21 +29057,22 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_gethostbyname=no ++ ac_cv_lib_nsl_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } + if test $ac_cv_lib_nsl_gethostbyname = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" + fi + + if test $ac_cv_lib_nsl_gethostbyname = no; then +- echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 +-echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } + if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26739,40 +29085,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + int + main () + { +-gethostbyname (); ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26781,14 +29139,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_bsd_gethostbyname=no ++ ac_cv_lib_bsd_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } + if test $ac_cv_lib_bsd_gethostbyname = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" + fi +@@ -26803,8 +29162,8 @@ + # variants that don't use the name server (or something). -lsocket + # must be given before -lnsl if both are needed. We assume that + # if connect needs -lnsl, so does gethostbyname. +- echo "$as_me:$LINENO: checking for connect" >&5 +-echo $ECHO_N "checking for connect... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } + if test "${ac_cv_func_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26831,53 +29190,59 @@ + + #undef connect + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char connect (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_connect) || defined (__stub___connect) ++#if defined __stub_connect || defined __stub___connect + choke me +-#else +-char (*f) () = connect; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != connect; ++return connect (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26886,17 +29251,18 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_connect=no ++ ac_cv_func_connect=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +-echo "${ECHO_T}$ac_cv_func_connect" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } + + if test $ac_cv_func_connect = no; then +- echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26909,40 +29275,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char connect (); + int + main () + { +-connect (); ++return connect (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -26951,14 +29329,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_socket_connect=no ++ ac_cv_lib_socket_connect=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } + if test $ac_cv_lib_socket_connect = yes; then + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" + fi +@@ -26966,8 +29345,8 @@ + fi + + # Guillermo Gomez says -lposix is necessary on A/UX. +- echo "$as_me:$LINENO: checking for remove" >&5 +-echo $ECHO_N "checking for remove... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } + if test "${ac_cv_func_remove+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -26994,53 +29373,59 @@ + + #undef remove + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char remove (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_remove) || defined (__stub___remove) ++#if defined __stub_remove || defined __stub___remove + choke me +-#else +-char (*f) () = remove; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != remove; ++return remove (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -27049,17 +29434,18 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_remove=no ++ ac_cv_func_remove=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +-echo "${ECHO_T}$ac_cv_func_remove" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } + + if test $ac_cv_func_remove = no; then +- echo "$as_me:$LINENO: checking for remove in -lposix" >&5 +-echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } + if test "${ac_cv_lib_posix_remove+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27072,40 +29458,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char remove (); + int + main () + { +-remove (); ++return remove (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -27114,14 +29512,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_posix_remove=no ++ ac_cv_lib_posix_remove=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 +-echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } + if test $ac_cv_lib_posix_remove = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" + fi +@@ -27129,8 +29528,8 @@ + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- echo "$as_me:$LINENO: checking for shmat" >&5 +-echo $ECHO_N "checking for shmat... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } + if test "${ac_cv_func_shmat+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27157,53 +29556,59 @@ + + #undef shmat + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shmat (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shmat) || defined (__stub___shmat) ++#if defined __stub_shmat || defined __stub___shmat + choke me +-#else +-char (*f) () = shmat; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != shmat; ++return shmat (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -27212,17 +29617,18 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shmat=no ++ ac_cv_func_shmat=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +-echo "${ECHO_T}$ac_cv_func_shmat" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } + + if test $ac_cv_func_shmat = no; then +- echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 +-echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } + if test "${ac_cv_lib_ipc_shmat+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27235,40 +29641,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shmat (); + int + main () + { +-shmat (); ++return shmat (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -27277,14 +29695,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_ipc_shmat=no ++ ac_cv_lib_ipc_shmat=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 +-echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } + if test $ac_cv_lib_ipc_shmat = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" + fi +@@ -27301,8 +29720,8 @@ + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # John Interrante, Karl Berry +- echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 +-echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } + if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27315,40 +29734,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char IceConnectionNumber (); + int + main () + { +-IceConnectionNumber (); ++return IceConnectionNumber (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -27357,14 +29788,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_ICE_IceConnectionNumber=no ++ ac_cv_lib_ICE_IceConnectionNumber=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +-echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } + if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" + fi +@@ -27404,8 +29836,8 @@ + + # Extract the first word of "doxygen", so it can be a program name with args. + set dummy doxygen; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_DOXYGEN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27420,31 +29852,32 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_DOXYGEN" && ac_cv_path_DOXYGEN="no" + ;; + esac + fi + DOXYGEN=$ac_cv_path_DOXYGEN +- + if test -n "$DOXYGEN"; then +- echo "$as_me:$LINENO: result: $DOXYGEN" >&5 +-echo "${ECHO_T}$DOXYGEN" >&6 ++ { echo "$as_me:$LINENO: result: $DOXYGEN" >&5 ++echo "${ECHO_T}$DOXYGEN" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +-echo "$as_me:$LINENO: checking whether to build Doxygen documentation" >&5 +-echo $ECHO_N "checking whether to build Doxygen documentation... $ECHO_C" >&6 ++ ++{ echo "$as_me:$LINENO: checking whether to build Doxygen documentation" >&5 ++echo $ECHO_N "checking whether to build Doxygen documentation... $ECHO_C" >&6; } + + if test x$DOXYGEN = xno ; then + have_doxygen=no +@@ -27478,15 +29911,15 @@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE= + fi + +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + ### XML Documentation + + # Extract the first word of "xmlto", so it can be a program name with args. + set dummy xmlto; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_XMLTO+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -27501,31 +29934,32 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" + ;; + esac + fi + XMLTO=$ac_cv_path_XMLTO +- + if test -n "$XMLTO"; then +- echo "$as_me:$LINENO: result: $XMLTO" >&5 +-echo "${ECHO_T}$XMLTO" >&6 ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +-echo "$as_me:$LINENO: checking whether to build XML documentation" >&5 +-echo $ECHO_N "checking whether to build XML documentation... $ECHO_C" >&6 ++ ++{ echo "$as_me:$LINENO: checking whether to build XML documentation" >&5 ++echo $ECHO_N "checking whether to build XML documentation... $ECHO_C" >&6; } + + if test x$XMLTO = xno ; then + have_xmlto=no +@@ -27559,8 +29993,8 @@ + DBUS_XML_DOCS_ENABLED_FALSE= + fi + +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + #### Have to go $localstatedir->$prefix/var->/usr/local/var + #### someone please fix this a better way... +@@ -27725,6 +30159,20 @@ + _ACEOF + + ++#### Application to check for current console ++if ! test -z "$with_foreground_console_command"; then ++ DBUS_FOREGROUND_CONSOLE_COMMAND=$with_foreground_console_comand ++else ++ DBUS_FOREGROUND_CONSOLE_COMMAND=/usr/lib/dbus-1.0/dbus-foreground-console ++fi ++ ++ ++ ++cat >>confdefs.h <<_ACEOF ++#define DBUS_FOREGROUND_CONSOLE_COMMAND "$DBUS_FOREGROUND_CONSOLE_COMMAND" ++_ACEOF ++ ++ + #### User to start the system bus as + if test -z "$with_dbus_user" ; then + DBUS_USER=messagebus +@@ -27871,7 +30319,8 @@ + + + +- ac_config_files="$ac_config_files Doxyfile dbus/dbus-arch-deps.h bus/system.conf bus/session.conf bus/messagebus bus/rc.messagebus bus/dbus-daemon.1 Makefile dbus/Makefile bus/Makefile tools/Makefile test/Makefile test/name-test/Makefile doc/Makefile dbus-1.pc test/data/valid-config-files/debug-allow-all.conf test/data/valid-config-files/debug-allow-all-sha1.conf test/data/valid-service-files/debug-echo.service test/data/valid-service-files/debug-segfault.service test/data/valid-service-files/debug-shell-echo-success.service test/data/valid-service-files/debug-shell-echo-fail.service" ++ac_config_files="$ac_config_files Doxyfile dbus/dbus-arch-deps.h bus/system.conf bus/session.conf bus/messagebus bus/rc.messagebus bus/dbus-daemon.1 Makefile dbus/Makefile bus/Makefile tools/Makefile test/Makefile test/name-test/Makefile doc/Makefile dbus-1.pc test/data/valid-config-files/debug-allow-all.conf test/data/valid-config-files/debug-allow-all-sha1.conf test/data/valid-service-files/debug-echo.service test/data/valid-service-files/debug-segfault.service test/data/valid-service-files/debug-shell-echo-success.service test/data/valid-service-files/debug-shell-echo-fail.service" ++ + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +@@ -27890,39 +30339,58 @@ + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -27931,32 +30399,18 @@ + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -28106,11 +30560,35 @@ + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +@@ -28119,8 +30597,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -28134,18 +30647,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -28153,159 +30667,120 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +- +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# CDPATH. ++$as_unset CDPATH + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -28314,7 +30789,19 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++# Find out whether ``test -x'' works. Don't use a zero-byte file, as ++# systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ as_executable_p="test -x" ++else ++ as_executable_p=: ++fi ++rm -f conf$$.file + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -28323,31 +30810,14 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.60a. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -28355,30 +30825,20 @@ + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -28386,7 +30846,7 @@ + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -28405,19 +30865,21 @@ + $config_commands + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + config.status +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.60a, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -28428,39 +30890,24 @@ + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -28470,18 +30917,24 @@ + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -28497,57 +30950,69 @@ + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + # +-# INIT-COMMANDS section. ++# INIT-COMMANDS + # +- + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + _ACEOF + +- +- + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Doxyfile" ) CONFIG_FILES="$CONFIG_FILES Doxyfile" ;; +- "dbus/dbus-arch-deps.h" ) CONFIG_FILES="$CONFIG_FILES dbus/dbus-arch-deps.h" ;; +- "bus/system.conf" ) CONFIG_FILES="$CONFIG_FILES bus/system.conf" ;; +- "bus/session.conf" ) CONFIG_FILES="$CONFIG_FILES bus/session.conf" ;; +- "bus/messagebus" ) CONFIG_FILES="$CONFIG_FILES bus/messagebus" ;; +- "bus/rc.messagebus" ) CONFIG_FILES="$CONFIG_FILES bus/rc.messagebus" ;; +- "bus/dbus-daemon.1" ) CONFIG_FILES="$CONFIG_FILES bus/dbus-daemon.1" ;; +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "dbus/Makefile" ) CONFIG_FILES="$CONFIG_FILES dbus/Makefile" ;; +- "bus/Makefile" ) CONFIG_FILES="$CONFIG_FILES bus/Makefile" ;; +- "tools/Makefile" ) CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; +- "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; +- "test/name-test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/name-test/Makefile" ;; +- "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; +- "dbus-1.pc" ) CONFIG_FILES="$CONFIG_FILES dbus-1.pc" ;; +- "test/data/valid-config-files/debug-allow-all.conf" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-config-files/debug-allow-all.conf" ;; +- "test/data/valid-config-files/debug-allow-all-sha1.conf" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-config-files/debug-allow-all-sha1.conf" ;; +- "test/data/valid-service-files/debug-echo.service" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-echo.service" ;; +- "test/data/valid-service-files/debug-segfault.service" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-segfault.service" ;; +- "test/data/valid-service-files/debug-shell-echo-success.service" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-shell-echo-success.service" ;; +- "test/data/valid-service-files/debug-shell-echo-fail.service" ) CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-shell-echo-fail.service" ;; +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;; ++ "dbus/dbus-arch-deps.h") CONFIG_FILES="$CONFIG_FILES dbus/dbus-arch-deps.h" ;; ++ "bus/system.conf") CONFIG_FILES="$CONFIG_FILES bus/system.conf" ;; ++ "bus/session.conf") CONFIG_FILES="$CONFIG_FILES bus/session.conf" ;; ++ "bus/messagebus") CONFIG_FILES="$CONFIG_FILES bus/messagebus" ;; ++ "bus/rc.messagebus") CONFIG_FILES="$CONFIG_FILES bus/rc.messagebus" ;; ++ "bus/dbus-daemon.1") CONFIG_FILES="$CONFIG_FILES bus/dbus-daemon.1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "dbus/Makefile") CONFIG_FILES="$CONFIG_FILES dbus/Makefile" ;; ++ "bus/Makefile") CONFIG_FILES="$CONFIG_FILES bus/Makefile" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; ++ "test/name-test/Makefile") CONFIG_FILES="$CONFIG_FILES test/name-test/Makefile" ;; ++ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; ++ "dbus-1.pc") CONFIG_FILES="$CONFIG_FILES dbus-1.pc" ;; ++ "test/data/valid-config-files/debug-allow-all.conf") CONFIG_FILES="$CONFIG_FILES test/data/valid-config-files/debug-allow-all.conf" ;; ++ "test/data/valid-config-files/debug-allow-all-sha1.conf") CONFIG_FILES="$CONFIG_FILES test/data/valid-config-files/debug-allow-all-sha1.conf" ;; ++ "test/data/valid-service-files/debug-echo.service") CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-echo.service" ;; ++ "test/data/valid-service-files/debug-segfault.service") CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-segfault.service" ;; ++ "test/data/valid-service-files/debug-shell-echo-success.service") CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-shell-echo-success.service" ;; ++ "test/data/valid-service-files/debug-shell-echo-fail.service") CONFIG_FILES="$CONFIG_FILES test/data/valid-service-files/debug-shell-echo-fail.service" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -28559,435 +31024,542 @@ + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@target@,$target,;t t +-s,@target_cpu@,$target_cpu,;t t +-s,@target_vendor@,$target_vendor,;t t +-s,@target_os@,$target_os,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@CYGPATH_W@,$CYGPATH_W,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@install_sh@,$install_sh,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +-s,@mkdir_p@,$mkdir_p,;t t +-s,@AWK@,$AWK,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@am__leading_dot@,$am__leading_dot,;t t +-s,@AMTAR@,$AMTAR,;t t +-s,@am__tar@,$am__tar,;t t +-s,@am__untar@,$am__untar,;t t +-s,@GETTEXT_PACKAGE@,$GETTEXT_PACKAGE,;t t +-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t +-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t +-s,@MAINT@,$MAINT,;t t +-s,@LT_CURRENT@,$LT_CURRENT,;t t +-s,@LT_REVISION@,$LT_REVISION,;t t +-s,@LT_AGE@,$LT_AGE,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@DEPDIR@,$DEPDIR,;t t +-s,@am__include@,$am__include,;t t +-s,@am__quote@,$am__quote,;t t +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +-s,@CCDEPMODE@,$CCDEPMODE,;t t +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +-s,@CXX@,$CXX,;t t +-s,@CXXFLAGS@,$CXXFLAGS,;t t +-s,@ac_ct_CXX@,$ac_ct_CXX,;t t +-s,@CXXDEPMODE@,$CXXDEPMODE,;t t +-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t +-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t +-s,@CPP@,$CPP,;t t +-s,@EGREP@,$EGREP,;t t +-s,@DBUS_BUILD_TESTS_TRUE@,$DBUS_BUILD_TESTS_TRUE,;t t +-s,@DBUS_BUILD_TESTS_FALSE@,$DBUS_BUILD_TESTS_FALSE,;t t +-s,@R_DYNAMIC_LDFLAG@,$R_DYNAMIC_LDFLAG,;t t +-s,@SED@,$SED,;t t +-s,@LN_S@,$LN_S,;t t +-s,@ECHO@,$ECHO,;t t +-s,@AR@,$AR,;t t +-s,@ac_ct_AR@,$ac_ct_AR,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@CXXCPP@,$CXXCPP,;t t +-s,@F77@,$F77,;t t +-s,@FFLAGS@,$FFLAGS,;t t +-s,@ac_ct_F77@,$ac_ct_F77,;t t +-s,@LIBTOOL@,$LIBTOOL,;t t +-s,@DBUS_GCOV_ENABLED_TRUE@,$DBUS_GCOV_ENABLED_TRUE,;t t +-s,@DBUS_GCOV_ENABLED_FALSE@,$DBUS_GCOV_ENABLED_FALSE,;t t +-s,@DBUS_INT64_TYPE@,$DBUS_INT64_TYPE,;t t +-s,@DBUS_INT64_CONSTANT@,$DBUS_INT64_CONSTANT,;t t +-s,@DBUS_UINT64_CONSTANT@,$DBUS_UINT64_CONSTANT,;t t +-s,@DBUS_HAVE_INT64@,$DBUS_HAVE_INT64,;t t +-s,@DBUS_INT32_TYPE@,$DBUS_INT32_TYPE,;t t +-s,@DBUS_INT16_TYPE@,$DBUS_INT16_TYPE,;t t +-s,@DBUS_PATH_OR_ABSTRACT@,$DBUS_PATH_OR_ABSTRACT,;t t +-s,@PKG_CONFIG@,$PKG_CONFIG,;t t +-s,@LIBXML_CFLAGS@,$LIBXML_CFLAGS,;t t +-s,@LIBXML_LIBS@,$LIBXML_LIBS,;t t +-s,@DBUS_USE_EXPAT_TRUE@,$DBUS_USE_EXPAT_TRUE,;t t +-s,@DBUS_USE_EXPAT_FALSE@,$DBUS_USE_EXPAT_FALSE,;t t +-s,@DBUS_USE_LIBXML_TRUE@,$DBUS_USE_LIBXML_TRUE,;t t +-s,@DBUS_USE_LIBXML_FALSE@,$DBUS_USE_LIBXML_FALSE,;t t +-s,@HAVE_SELINUX_TRUE@,$HAVE_SELINUX_TRUE,;t t +-s,@HAVE_SELINUX_FALSE@,$HAVE_SELINUX_FALSE,;t t +-s,@DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE@,$DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE,;t t +-s,@DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE@,$DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE,;t t +-s,@DBUS_BUS_ENABLE_KQUEUE_TRUE@,$DBUS_BUS_ENABLE_KQUEUE_TRUE,;t t +-s,@DBUS_BUS_ENABLE_KQUEUE_FALSE@,$DBUS_BUS_ENABLE_KQUEUE_FALSE,;t t +-s,@HAVE_CONSOLE_OWNER_FILE_TRUE@,$HAVE_CONSOLE_OWNER_FILE_TRUE,;t t +-s,@HAVE_CONSOLE_OWNER_FILE_FALSE@,$HAVE_CONSOLE_OWNER_FILE_FALSE,;t t +-s,@DBUS_CLIENT_CFLAGS@,$DBUS_CLIENT_CFLAGS,;t t +-s,@DBUS_CLIENT_LIBS@,$DBUS_CLIENT_LIBS,;t t +-s,@DBUS_BUS_CFLAGS@,$DBUS_BUS_CFLAGS,;t t +-s,@DBUS_BUS_LIBS@,$DBUS_BUS_LIBS,;t t +-s,@DBUS_TEST_CFLAGS@,$DBUS_TEST_CFLAGS,;t t +-s,@DBUS_TEST_LIBS@,$DBUS_TEST_LIBS,;t t +-s,@X_CFLAGS@,$X_CFLAGS,;t t +-s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t +-s,@X_LIBS@,$X_LIBS,;t t +-s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t +-s,@DBUS_X_CFLAGS@,$DBUS_X_CFLAGS,;t t +-s,@DBUS_X_LIBS@,$DBUS_X_LIBS,;t t +-s,@DOXYGEN@,$DOXYGEN,;t t +-s,@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@,$DBUS_DOXYGEN_DOCS_ENABLED_TRUE,;t t +-s,@DBUS_DOXYGEN_DOCS_ENABLED_FALSE@,$DBUS_DOXYGEN_DOCS_ENABLED_FALSE,;t t +-s,@XMLTO@,$XMLTO,;t t +-s,@DBUS_XML_DOCS_ENABLED_TRUE@,$DBUS_XML_DOCS_ENABLED_TRUE,;t t +-s,@DBUS_XML_DOCS_ENABLED_FALSE@,$DBUS_XML_DOCS_ENABLED_FALSE,;t t +-s,@EXPANDED_LOCALSTATEDIR@,$EXPANDED_LOCALSTATEDIR,;t t +-s,@EXPANDED_SYSCONFDIR@,$EXPANDED_SYSCONFDIR,;t t +-s,@EXPANDED_BINDIR@,$EXPANDED_BINDIR,;t t +-s,@EXPANDED_LIBDIR@,$EXPANDED_LIBDIR,;t t +-s,@EXPANDED_DATADIR@,$EXPANDED_DATADIR,;t t +-s,@DBUS_INIT_SCRIPTS_RED_HAT_TRUE@,$DBUS_INIT_SCRIPTS_RED_HAT_TRUE,;t t +-s,@DBUS_INIT_SCRIPTS_RED_HAT_FALSE@,$DBUS_INIT_SCRIPTS_RED_HAT_FALSE,;t t +-s,@DBUS_INIT_SCRIPTS_SLACKWARE_TRUE@,$DBUS_INIT_SCRIPTS_SLACKWARE_TRUE,;t t +-s,@DBUS_INIT_SCRIPTS_SLACKWARE_FALSE@,$DBUS_INIT_SCRIPTS_SLACKWARE_FALSE,;t t +-s,@DBUS_SYSTEM_SOCKET@,$DBUS_SYSTEM_SOCKET,;t t +-s,@DBUS_SYSTEM_BUS_DEFAULT_ADDRESS@,$DBUS_SYSTEM_BUS_DEFAULT_ADDRESS,;t t +-s,@DBUS_SYSTEM_PID_FILE@,$DBUS_SYSTEM_PID_FILE,;t t +-s,@DBUS_CONSOLE_AUTH_DIR@,$DBUS_CONSOLE_AUTH_DIR,;t t +-s,@DBUS_CONSOLE_OWNER_FILE@,$DBUS_CONSOLE_OWNER_FILE,;t t +-s,@DBUS_USER@,$DBUS_USER,;t t +-s,@DBUS_DATADIR@,$DBUS_DATADIR,;t t +-s,@DBUS_DAEMONDIR@,$DBUS_DAEMONDIR,;t t +-s,@DBUS_BINDIR@,$DBUS_BINDIR,;t t +-s,@TEST_SERVICE_DIR@,$TEST_SERVICE_DIR,;t t +-s,@TEST_SERVICE_BINARY@,$TEST_SERVICE_BINARY,;t t +-s,@TEST_SHELL_SERVICE_BINARY@,$TEST_SHELL_SERVICE_BINARY,;t t +-s,@TEST_EXIT_BINARY@,$TEST_EXIT_BINARY,;t t +-s,@TEST_SEGFAULT_BINARY@,$TEST_SEGFAULT_BINARY,;t t +-s,@TEST_SLEEP_FOREVER_BINARY@,$TEST_SLEEP_FOREVER_BINARY,;t t +-s,@TEST_BUS_BINARY@,$TEST_BUS_BINARY,;t t +-s,@TEST_SOCKET_DIR@,$TEST_SOCKET_DIR,;t t +-s,@DBUS_SESSION_SOCKET_DIR@,$DBUS_SESSION_SOCKET_DIR,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim ++MAINT!$MAINT$ac_delim ++LT_CURRENT!$LT_CURRENT$ac_delim ++LT_REVISION!$LT_REVISION$ac_delim ++LT_AGE!$LT_AGE$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++CXX!$CXX$ac_delim ++CXXFLAGS!$CXXFLAGS$ac_delim ++ac_ct_CXX!$ac_ct_CXX$ac_delim ++CXXDEPMODE!$CXXDEPMODE$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done + ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof + _ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim ++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim ++CPP!$CPP$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++DBUS_BUILD_TESTS_TRUE!$DBUS_BUILD_TESTS_TRUE$ac_delim ++DBUS_BUILD_TESTS_FALSE!$DBUS_BUILD_TESTS_FALSE$ac_delim ++R_DYNAMIC_LDFLAG!$R_DYNAMIC_LDFLAG$ac_delim ++LN_S!$LN_S$ac_delim ++ECHO!$ECHO$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++CXXCPP!$CXXCPP$ac_delim ++F77!$F77$ac_delim ++FFLAGS!$FFLAGS$ac_delim ++ac_ct_F77!$ac_ct_F77$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++DBUS_GCOV_ENABLED_TRUE!$DBUS_GCOV_ENABLED_TRUE$ac_delim ++DBUS_GCOV_ENABLED_FALSE!$DBUS_GCOV_ENABLED_FALSE$ac_delim ++DBUS_INT64_TYPE!$DBUS_INT64_TYPE$ac_delim ++DBUS_INT64_CONSTANT!$DBUS_INT64_CONSTANT$ac_delim ++DBUS_UINT64_CONSTANT!$DBUS_UINT64_CONSTANT$ac_delim ++DBUS_HAVE_INT64!$DBUS_HAVE_INT64$ac_delim ++DBUS_INT32_TYPE!$DBUS_INT32_TYPE$ac_delim ++DBUS_INT16_TYPE!$DBUS_INT16_TYPE$ac_delim ++DBUS_PATH_OR_ABSTRACT!$DBUS_PATH_OR_ABSTRACT$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++LIBXML_CFLAGS!$LIBXML_CFLAGS$ac_delim ++LIBXML_LIBS!$LIBXML_LIBS$ac_delim ++DBUS_USE_EXPAT_TRUE!$DBUS_USE_EXPAT_TRUE$ac_delim ++DBUS_USE_EXPAT_FALSE!$DBUS_USE_EXPAT_FALSE$ac_delim ++DBUS_USE_LIBXML_TRUE!$DBUS_USE_LIBXML_TRUE$ac_delim ++DBUS_USE_LIBXML_FALSE!$DBUS_USE_LIBXML_FALSE$ac_delim ++HAVE_SELINUX_TRUE!$HAVE_SELINUX_TRUE$ac_delim ++HAVE_SELINUX_FALSE!$HAVE_SELINUX_FALSE$ac_delim ++DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE!$DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE$ac_delim ++DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE!$DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE$ac_delim ++DBUS_BUS_ENABLE_KQUEUE_TRUE!$DBUS_BUS_ENABLE_KQUEUE_TRUE$ac_delim ++DBUS_BUS_ENABLE_KQUEUE_FALSE!$DBUS_BUS_ENABLE_KQUEUE_FALSE$ac_delim ++HAVE_CONSOLE_OWNER_FILE_TRUE!$HAVE_CONSOLE_OWNER_FILE_TRUE$ac_delim ++HAVE_CONSOLE_OWNER_FILE_FALSE!$HAVE_CONSOLE_OWNER_FILE_FALSE$ac_delim ++DBUS_CLIENT_CFLAGS!$DBUS_CLIENT_CFLAGS$ac_delim ++DBUS_CLIENT_LIBS!$DBUS_CLIENT_LIBS$ac_delim ++DBUS_BUS_CFLAGS!$DBUS_BUS_CFLAGS$ac_delim ++DBUS_BUS_LIBS!$DBUS_BUS_LIBS$ac_delim ++DBUS_TEST_CFLAGS!$DBUS_TEST_CFLAGS$ac_delim ++DBUS_TEST_LIBS!$DBUS_TEST_LIBS$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++DBUS_X_CFLAGS!$DBUS_X_CFLAGS$ac_delim ++DBUS_X_LIBS!$DBUS_X_LIBS$ac_delim ++DOXYGEN!$DOXYGEN$ac_delim ++DBUS_DOXYGEN_DOCS_ENABLED_TRUE!$DBUS_DOXYGEN_DOCS_ENABLED_TRUE$ac_delim ++DBUS_DOXYGEN_DOCS_ENABLED_FALSE!$DBUS_DOXYGEN_DOCS_ENABLED_FALSE$ac_delim ++XMLTO!$XMLTO$ac_delim ++DBUS_XML_DOCS_ENABLED_TRUE!$DBUS_XML_DOCS_ENABLED_TRUE$ac_delim ++DBUS_XML_DOCS_ENABLED_FALSE!$DBUS_XML_DOCS_ENABLED_FALSE$ac_delim ++EXPANDED_LOCALSTATEDIR!$EXPANDED_LOCALSTATEDIR$ac_delim ++EXPANDED_SYSCONFDIR!$EXPANDED_SYSCONFDIR$ac_delim ++EXPANDED_BINDIR!$EXPANDED_BINDIR$ac_delim ++EXPANDED_LIBDIR!$EXPANDED_LIBDIR$ac_delim ++EXPANDED_DATADIR!$EXPANDED_DATADIR$ac_delim ++DBUS_INIT_SCRIPTS_RED_HAT_TRUE!$DBUS_INIT_SCRIPTS_RED_HAT_TRUE$ac_delim ++DBUS_INIT_SCRIPTS_RED_HAT_FALSE!$DBUS_INIT_SCRIPTS_RED_HAT_FALSE$ac_delim ++DBUS_INIT_SCRIPTS_SLACKWARE_TRUE!$DBUS_INIT_SCRIPTS_SLACKWARE_TRUE$ac_delim ++DBUS_INIT_SCRIPTS_SLACKWARE_FALSE!$DBUS_INIT_SCRIPTS_SLACKWARE_FALSE$ac_delim ++DBUS_SYSTEM_SOCKET!$DBUS_SYSTEM_SOCKET$ac_delim ++DBUS_SYSTEM_BUS_DEFAULT_ADDRESS!$DBUS_SYSTEM_BUS_DEFAULT_ADDRESS$ac_delim ++DBUS_SYSTEM_PID_FILE!$DBUS_SYSTEM_PID_FILE$ac_delim ++DBUS_CONSOLE_AUTH_DIR!$DBUS_CONSOLE_AUTH_DIR$ac_delim ++DBUS_CONSOLE_OWNER_FILE!$DBUS_CONSOLE_OWNER_FILE$ac_delim ++DBUS_FOREGROUND_CONSOLE_COMMAND!$DBUS_FOREGROUND_CONSOLE_COMMAND$ac_delim ++DBUS_USER!$DBUS_USER$ac_delim ++DBUS_DATADIR!$DBUS_DATADIR$ac_delim ++DBUS_DAEMONDIR!$DBUS_DAEMONDIR$ac_delim ++DBUS_BINDIR!$DBUS_BINDIR$ac_delim ++TEST_SERVICE_DIR!$TEST_SERVICE_DIR$ac_delim ++TEST_SERVICE_BINARY!$TEST_SERVICE_BINARY$ac_delim ++TEST_SHELL_SERVICE_BINARY!$TEST_SHELL_SERVICE_BINARY$ac_delim ++TEST_EXIT_BINARY!$TEST_EXIT_BINARY$ac_delim ++TEST_SEGFAULT_BINARY!$TEST_SEGFAULT_BINARY$ac_delim ++TEST_SLEEP_FOREVER_BINARY!$TEST_SLEEP_FOREVER_BINARY$ac_delim ++TEST_BUS_BINARY!$TEST_BUS_BINARY$ac_delim ++TEST_SOCKET_DIR!$TEST_SOCKET_DIR$ac_delim ++DBUS_SESSION_SOCKET_DIR!$DBUS_SESSION_SOCKET_DIR$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 90; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; + esac + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++_ACEOF + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac + _ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? + cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub +@@ -28995,248 +31567,130 @@ + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi +- +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-# +-# CONFIG_HEADER section. +-# +- +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' +- +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + _ACEOF + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines + +-# This sed command replaces #undef with comments. This is necessary, for ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' + +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null ++while : + do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi ++ rm -f "$tmp/out12" + # Compute $ac_file's index in $config_headers. + _am_stamp_count=1 + for _am_header in $config_headers :; do +@@ -29247,135 +31701,39 @@ + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || + $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ +- X$ac_file : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || + echo X$ac_file | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'`/stamp-h$_am_stamp_count +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X\(//\)[^/]' \| \ +- X"$ac_dest" : 'X\(//\)$' \| \ +- X"$ac_dest" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- +- ac_builddir=. +- +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi +- +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + + +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. +@@ -29385,18 +31743,29 @@ + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`(dirname "$mf") 2>/dev/null || ++ dirpart=`$as_dirname -- "$mf" || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || + echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + else + continue + fi +@@ -29418,53 +31787,79 @@ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +- fdir=`(dirname "$file") 2>/dev/null || ++ fdir=`$as_dirname -- "$file" || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p $dirpart/$fdir +- else +- as_dir=$dirpart/$fdir ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; ++ + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +@@ -29539,6 +31934,7 @@ + Console auth dir: ${DBUS_CONSOLE_AUTH_DIR} + Console owner file: ${have_console_owner_file} + Console owner file path: ${DBUS_CONSOLE_OWNER_FILE} ++ Foreground console app: ${DBUS_FOREGROUND_CONSOLE_COMMAND} + System bus user: ${DBUS_USER} + Session bus services dir: ${EXPANDED_DATADIR}/dbus-1/services + 'make check' socket dir: ${TEST_SOCKET_DIR} +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/dbus/Makefile.in dbus-0.95/dbus/Makefile.in +--- dbus-0.95-old/dbus/Makefile.in 2006-11-03 00:19:41.000000000 +0100 ++++ dbus-0.95/dbus/Makefile.in 2006-11-07 22:22:54.745449000 +0100 +@@ -153,6 +153,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -198,6 +199,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -232,7 +234,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -245,17 +246,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -272,23 +271,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/doc/Makefile.in dbus-0.95/doc/Makefile.in +--- dbus-0.95-old/doc/Makefile.in 2006-11-03 00:19:41.000000000 +0100 ++++ dbus-0.95/doc/Makefile.in 2006-11-07 22:22:54.937461000 +0100 +@@ -86,6 +86,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -131,6 +132,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -165,7 +167,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -178,17 +179,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -205,23 +204,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/ltmain.sh dbus-0.95/ltmain.sh +--- dbus-0.95-old/ltmain.sh 2006-07-13 09:12:13.000000000 +0200 ++++ dbus-0.95/ltmain.sh 2006-06-19 20:36:49.000000000 +0200 +@@ -43,19 +43,13 @@ + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION=1.5.22 ++VERSION="1.5.22 Debian 1.5.22-4" + TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes. ++if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi + + # Check that we have a working $echo. +@@ -111,14 +105,12 @@ + # These must not be set unconditionally because not all systems understand + # e.g. LANG=C (notably SCO). + # We save the old values to restore during execute mode. +-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +-do +- eval "if test \"\${$lt_var+set}\" = set; then +- save_$lt_var=\$$lt_var +- $lt_var=C +- export $lt_var +- fi" +-done ++if test "${LC_ALL+set}" = set; then ++ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL ++fi ++if test "${LANG+set}" = set; then ++ save_LANG="$LANG"; LANG=C; export LANG ++fi + + # Make sure IFS has a sensible default + lt_nl=' +@@ -144,8 +136,6 @@ + preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" +-extracted_archives= +-extracted_serial=0 + + ##################################### + # Shell function definitions: +@@ -337,17 +327,7 @@ + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` +- my_xlib_u=$my_xlib +- while :; do +- case " $extracted_archives " in +- *" $my_xlib_u "*) +- extracted_serial=`expr $extracted_serial + 1` +- my_xlib_u=lt$extracted_serial-$my_xlib ;; +- *) break ;; +- esac +- done +- extracted_archives="$extracted_archives $my_xlib_u" +- my_xdir="$my_gentop/$my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" +@@ -778,7 +758,6 @@ + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; +- *.obj) xform=obj ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +@@ -1159,9 +1138,8 @@ + for arg + do + case $arg in +- -all-static | -static | -static-libtool-libs) +- case $arg in +- -all-static) ++ -all-static | -static) ++ if test "X$arg" = "X-all-static"; then + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi +@@ -1169,20 +1147,12 @@ + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes +- ;; +- -static) ++ else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built +- ;; +- -static-libtool-libs) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- esac ++ fi + build_libtool_libs=no + build_old_libs=yes + break +@@ -1742,7 +1712,7 @@ + continue + ;; + +- -static | -static-libtool-libs) ++ -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects +@@ -2112,7 +2082,10 @@ + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; + esac + fi + if test "$pass" = dlopen; then +@@ -2520,9 +2493,7 @@ + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && +- { { test "$prefer_static_libs" = no || +- test "$prefer_static_libs,$installed" = "built,yes"; } || +- test -z "$old_library"; }; then ++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. +@@ -3218,7 +3189,7 @@ + # which has an extra 1 added just for fun + # + case $version_type in +- darwin|linux|osf|windows|none) ++ darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" +@@ -3233,6 +3204,11 @@ + age="$number_minor" + revision="$number_minor" + ;; ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++ ;; + esac + ;; + no) +@@ -3442,11 +3418,11 @@ + fi + + # Eliminate all temporary directories. +-# for path in $notinst_path; do +-# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` +-# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` +-# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` +-# done ++ for path in $notinst_path; do ++ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` ++ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` ++ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` ++ done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. +@@ -3547,12 +3523,13 @@ + int main() { return 0; } + EOF + $rm conftest +- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ++ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + for i in $deplibs; do + name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then ++ if test "$name" != "" && test "$name" -ne "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) +@@ -3591,7 +3568,9 @@ + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + $rm conftest +- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ++ $LTCC $LTCFLAGS -o conftest conftest.c $i ++ # Did it work? ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in +@@ -3623,7 +3602,7 @@ + droppeddeps=yes + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" +- $echo "*** make it link in! You will probably need to install it or some" ++ $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." + fi +@@ -4268,14 +4247,12 @@ + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec and hope we can get by with +- # turning comma into space.. ++ # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then +- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" +- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` ++ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" +@@ -4723,16 +4700,16 @@ + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + else +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + fi + ;; + * ) +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + esac + ;; +@@ -4747,13 +4724,13 @@ + # really was required. + + # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` ++ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. +@@ -4840,7 +4817,7 @@ + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` ++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= +@@ -4877,7 +4854,7 @@ + fi + done + relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` ++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. +@@ -5284,18 +5261,6 @@ + Xsed='${SED} -e 1s/^X//' + sed_quote_subst='$sed_quote_subst' + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '\${1+\"\$@\"}'='\"\$@\"' +- setopt NO_GLOB_SUBST +-else +- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +-fi +- + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. + (unset CDPATH) >/dev/null 2>&1 && unset CDPATH +@@ -5438,7 +5403,7 @@ + ;; + esac + $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \$*\" ++ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit $EXIT_FAILURE + fi + else +@@ -5624,7 +5589,7 @@ + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` ++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi +@@ -5969,9 +5934,9 @@ + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 +@@ -6180,7 +6145,7 @@ + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` ++ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : +@@ -6456,15 +6421,12 @@ + fi + + # Restore saved environment variables +- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +- do +- eval "if test \"\${save_$lt_var+set}\" = set; then +- $lt_var=\$save_$lt_var; export $lt_var +- else +- $lt_unset $lt_var +- fi" +- done +- ++ if test "${save_LC_ALL+set}" = set; then ++ LC_ALL="$save_LC_ALL"; export LC_ALL ++ fi ++ if test "${save_LANG+set}" = set; then ++ LANG="$save_LANG"; export LANG ++ fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" +@@ -6821,9 +6783,9 @@ + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE ++ try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX +- try to export only the symbols matching REGEX ++ try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened +@@ -6837,11 +6799,9 @@ + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of uninstalled libtool libraries +- -static-libtool-libs +- do not do any dynamic linking of libtool libraries ++ -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] ++ specify library version info [each variable defaults to 0] + + All other options (arguments beginning with \`-') are ignored. + +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/Makefile.in dbus-0.95/Makefile.in +--- dbus-0.95-old/Makefile.in 2006-11-03 00:19:42.000000000 +0100 ++++ dbus-0.95/Makefile.in 2006-11-07 22:22:56.261543750 +0100 +@@ -132,6 +132,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -177,6 +178,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -211,7 +213,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -224,17 +225,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -251,23 +250,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/test/Makefile.in dbus-0.95/test/Makefile.in +--- dbus-0.95-old/test/Makefile.in 2006-11-03 00:19:41.000000000 +0100 ++++ dbus-0.95/test/Makefile.in 2006-11-07 22:22:55.317484750 +0100 +@@ -154,6 +154,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -199,6 +200,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -233,7 +235,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -246,17 +247,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -273,23 +272,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/test/name-test/Makefile.in dbus-0.95/test/name-test/Makefile.in +--- dbus-0.95-old/test/name-test/Makefile.in 2006-11-03 00:19:41.000000000 +0100 ++++ dbus-0.95/test/name-test/Makefile.in 2006-11-07 22:22:55.597502250 +0100 +@@ -126,6 +126,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -171,6 +172,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -205,7 +207,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -218,17 +219,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -245,23 +244,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +diff -x'*INSTALL*' -x'*config.sub*' -x'*config.guess*' -Naur dbus-0.95-old/tools/Makefile.in dbus-0.95/tools/Makefile.in +--- dbus-0.95-old/tools/Makefile.in 2006-11-03 00:19:42.000000000 +0100 ++++ dbus-0.95/tools/Makefile.in 2006-11-07 22:22:55.901521250 +0100 +@@ -40,7 +40,7 @@ + target_triplet = @target@ + bin_PROGRAMS = dbus-send$(EXEEXT) dbus-monitor$(EXEEXT) \ + dbus-launch$(EXEEXT) dbus-cleanup-sockets$(EXEEXT) \ +- dbus-uuidgen$(EXEEXT) ++ dbus-uuidgen$(EXEEXT) dbus-foreground-console$(EXEEXT) + subdir = tools + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +@@ -58,6 +58,11 @@ + am_dbus_cleanup_sockets_OBJECTS = dbus-cleanup-sockets.$(OBJEXT) + dbus_cleanup_sockets_OBJECTS = $(am_dbus_cleanup_sockets_OBJECTS) + dbus_cleanup_sockets_LDADD = $(LDADD) ++am_dbus_foreground_console_OBJECTS = \ ++ dbus-foreground-console.$(OBJEXT) ++dbus_foreground_console_OBJECTS = \ ++ $(am_dbus_foreground_console_OBJECTS) ++dbus_foreground_console_LDADD = $(LDADD) + am_dbus_launch_OBJECTS = dbus-launch.$(OBJEXT) \ + dbus-launch-x11.$(OBJEXT) + dbus_launch_OBJECTS = $(am_dbus_launch_OBJECTS) +@@ -88,10 +93,12 @@ + CCLD = $(CC) + LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +-SOURCES = $(dbus_cleanup_sockets_SOURCES) $(dbus_launch_SOURCES) \ ++SOURCES = $(dbus_cleanup_sockets_SOURCES) \ ++ $(dbus_foreground_console_SOURCES) $(dbus_launch_SOURCES) \ + $(dbus_monitor_SOURCES) $(dbus_send_SOURCES) \ + $(dbus_uuidgen_SOURCES) +-DIST_SOURCES = $(dbus_cleanup_sockets_SOURCES) $(dbus_launch_SOURCES) \ ++DIST_SOURCES = $(dbus_cleanup_sockets_SOURCES) \ ++ $(dbus_foreground_console_SOURCES) $(dbus_launch_SOURCES) \ + $(dbus_monitor_SOURCES) $(dbus_send_SOURCES) \ + $(dbus_uuidgen_SOURCES) + man1dir = $(mandir)/man1 +@@ -144,6 +151,7 @@ + DBUS_DATADIR = @DBUS_DATADIR@ + DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@ + DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ ++DBUS_FOREGROUND_CONSOLE_COMMAND = @DBUS_FOREGROUND_CONSOLE_COMMAND@ + DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@ + DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@ + DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ +@@ -189,6 +197,7 @@ + F77 = @F77@ + FFLAGS = @FFLAGS@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ ++GREP = @GREP@ + HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@ + HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@ + HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@ +@@ -223,7 +232,6 @@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ + R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ +-SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ +@@ -236,17 +244,15 @@ + TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ + TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ + VERSION = @VERSION@ ++XMKMF = @XMKMF@ + XMLTO = @XMLTO@ + X_CFLAGS = @X_CFLAGS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-ac_ct_AR = @ac_ct_AR@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ + am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ + am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ + am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +@@ -263,23 +269,30 @@ + build_os = @build_os@ + build_vendor = @build_vendor@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ + sysconfdir = @sysconfdir@ +@@ -311,6 +324,9 @@ + dbus_uuidgen_SOURCES = \ + dbus-uuidgen.c + ++dbus_foreground_console_SOURCES = \ ++ dbus-foreground-console.c ++ + dbus_send_LDADD = $(top_builddir)/dbus/libdbus-1.la $(DBUS_CLIENT_LIBS) + dbus_send_LDFLAGS = @R_DYNAMIC_LDFLAG@ + dbus_monitor_LDADD = $(top_builddir)/dbus/libdbus-1.la $(DBUS_CLIENT_LIBS) +@@ -392,6 +408,9 @@ + dbus-cleanup-sockets$(EXEEXT): $(dbus_cleanup_sockets_OBJECTS) $(dbus_cleanup_sockets_DEPENDENCIES) + @rm -f dbus-cleanup-sockets$(EXEEXT) + $(LINK) $(dbus_cleanup_sockets_LDFLAGS) $(dbus_cleanup_sockets_OBJECTS) $(dbus_cleanup_sockets_LDADD) $(LIBS) ++dbus-foreground-console$(EXEEXT): $(dbus_foreground_console_OBJECTS) $(dbus_foreground_console_DEPENDENCIES) ++ @rm -f dbus-foreground-console$(EXEEXT) ++ $(LINK) $(dbus_foreground_console_LDFLAGS) $(dbus_foreground_console_OBJECTS) $(dbus_foreground_console_LDADD) $(LIBS) + dbus-launch$(EXEEXT): $(dbus_launch_OBJECTS) $(dbus_launch_DEPENDENCIES) + @rm -f dbus-launch$(EXEEXT) + $(LINK) $(dbus_launch_LDFLAGS) $(dbus_launch_OBJECTS) $(dbus_launch_LDADD) $(LIBS) +@@ -412,6 +431,7 @@ + -rm -f *.tab.c + + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-cleanup-sockets.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-foreground-console.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-launch-x11.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-launch.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-monitor.Po@am__quote@ --- dbus-0.95.orig/debian/dbus.dirs +++ dbus-0.95/debian/dbus.dirs @@ -0,0 +1 @@ +/var/lib/dbus --- dbus-0.95.orig/debian/dbus-1-utils.install +++ dbus-0.95/debian/dbus-1-utils.install @@ -0,0 +1,2 @@ +debian/tmp/usr/bin/dbus-monitor +debian/tmp/usr/share/man/man1/dbus-monitor.1 --- dbus-0.95.orig/debian/dbus.init +++ dbus-0.95/debian/dbus.init @@ -0,0 +1,115 @@ +#! /bin/sh +### BEGIN INIT INFO +# Provides: dbus +# Required-Start: $local_fs $syslog +# Required-Stop: $local_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: S 0 1 6 +### END INIT INFO +# -*- coding: utf-8 -*- +# Debian init.d script for D-BUS +# Copyright © 2003 Colin Walters +# Copyright © 2005 Sjoerd Simons + +set -e + +DAEMON=/usr/bin/dbus-daemon +UUIDGEN=/usr/bin/dbus-uuidgen +UUIDGEN_OPTS=--ensure +NAME=dbus +DAEMONUSER=messagebus +PIDDIR=/var/run/dbus +PIDFILE=$PIDDIR/pid +DESC="system message bus" +EVENTDIR=/etc/dbus-1/event.d + +test -x $DAEMON || exit 0 + +. /lib/lsb/init-functions + +# Source defaults file; edit that file to configure this script. +ENABLED=1 +PARAMS="" +if [ -e /etc/default/dbus ]; then + . /etc/default/dbus +fi + +test "$ENABLED" != "0" || exit 0 + +start_it_up() +{ + if [ ! -d $PIDDIR ]; then + mkdir -p $PIDDIR + chown $DAEMONUSER $PIDDIR + chgrp $DAEMONUSER $PIDDIR + fi + if [ -e $PIDFILE ]; then + PIDDIR=/proc/$(cat $PIDFILE) + if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then + log_success_msg "$DESC already started; not starting." + else + log_success_msg "Removing stale PID file $PIDFILE." + rm -f $PIDFILE + fi + fi + # Create machine-id file + if [ -x $UUIDGEN ]; then + $UUIDGEN $UUIDGEN_OPTS + fi + + log_daemon_msg "Starting $DESC" "$NAME" + start-stop-daemon --start --quiet --pidfile $PIDFILE \ + --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS + log_end_msg $? + if [ -d $EVENTDIR ]; then + run-parts --arg=start $EVENTDIR || true + fi +} + +shut_it_down() +{ + if [ -d $EVENTDIR ]; then + run-parts --reverse --arg=stop $EVENTDIR || true + fi + log_daemon_msg "Stopping $DESC" "$NAME" + start-stop-daemon --stop --retry 60 --quiet --oknodo --pidfile $PIDFILE \ + --user $DAEMONUSER + # We no longer include these arguments so that start-stop-daemon + # can do its job even given that we may have been upgraded. + # We rely on the pidfile being sanely managed + # --exec $DAEMON -- --system $PARAMS + log_end_msg $? + rm -f $PIDFILE +} + +reload_it() +{ + log_action_begin_msg "Reloading $DESC config" + dbus-send --print-reply --system --type=method_call \ + --dest=org.freedesktop.DBus \ + / org.freedesktop.DBus.ReloadConfig > /dev/null + # hopefully this is enough time for dbus to reload it's config file. + log_action_end_msg $? +} + +case "$1" in + start) + start_it_up + ;; + stop) + shut_it_down + ;; + reload|force-reload) + reload_it + ;; + restart) + shut_it_down + start_it_up + ;; + *) + echo "Usage: /etc/init.d/$NAME {start|stop|reload|restart|force-reload}" >&2 + exit 2 + ;; +esac + +exit 0 --- dbus-0.95.orig/debian/dbus-1-doc.install +++ dbus-0.95/debian/dbus-1-doc.install @@ -0,0 +1,4 @@ +doc/dbus-specification.html usr/share/doc/dbus-1-doc +doc/dbus-test-plan.html usr/share/doc/dbus-1-doc +doc/dcop-howto.txt usr/share/doc/dbus-1-doc +doc/api/html usr/share/doc/dbus-1-doc/api/ --- dbus-0.95.orig/debian/libdbus-1-dev.install +++ dbus-0.95/debian/libdbus-1-dev.install @@ -0,0 +1,5 @@ +debian/tmp/usr/include/dbus*/dbus/dbus*.h +debian/tmp/usr/lib/dbus*/include/dbus/dbus*.h +debian/tmp/usr/lib/pkgconfig/dbus-1.pc +debian/tmp/usr/lib/libdbus-1*.a +debian/tmp/usr/lib/libdbus-1*.so --- dbus-0.95.orig/debian/libdbus-1-3.shlibs +++ dbus-0.95/debian/libdbus-1-3.shlibs @@ -0,0 +1 @@ +libdbus-1 3 libdbus-1-3 (>= 0.94) --- dbus-0.95.orig/debian/dbus-Xsession +++ dbus-0.95/debian/dbus-Xsession @@ -0,0 +1,17 @@ +# $Id:$ +# In order to activate the session bus at X session launch +# simply place use-session-dbus into your /etc/X11/Xsession.options file +# + +STARTDBUS= +DBUSLAUNCH=/usr/bin/dbus-launch + +if grep -qs ^use-session-dbus "$OPTIONFILE"; then + if [ -x "$DBUSLAUNCH" ]; then + STARTDBUS=yes + fi +fi + +if [ -n "$STARTDBUS" ]; then + STARTUP="$DBUSLAUNCH --exit-with-session $STARTUP" +fi --- dbus-0.95.orig/debian/copyright +++ dbus-0.95/debian/copyright @@ -0,0 +1,213 @@ +This package was debianized by Colin Walters on +Thu, 6 Mar 2003 18:01:37 -0500 + +It was downloaded from http://www.freedesktop.org/software/dbus + +This package is dual-licensed under the Academic Free License, and the +GPL. For a description of the GPL, see /usr/share/common-licenses/GPL +on your Debian system. + +Portions of the package are only licensed under the GPL (notably +tools/dbus-cleanup-sockets.c and test/decode-gcov.c ). + +The Academic Free License follows: + + The Academic Free License + v. 2.0 + +This Academic Free License (the "License") applies to any original +work of authorship (the "Original Work") whose owner (the "Licensor") +has placed the following notice immediately following the copyright +notice for the Original Work: + +Licensed under the Academic Free License version 2.0 + +1) Grant of Copyright License. Licensor hereby grants You a +world-wide, royalty-free, non-exclusive, perpetual, sublicenseable +license to do the following: + +a) to reproduce the Original Work in copies; + +b) to prepare derivative works ("Derivative Works") based upon the Original Work; + +c) to distribute copies of the Original Work and Derivative Works to the public; + +d) to perform the Original Work publicly; and + +e) to display the Original Work publicly. + +2) Grant of Patent License. Licensor hereby grants You a world-wide, +royalty-free, non-exclusive, perpetual, sublicenseable license, under +patent claims owned or controlled by the Licensor that are embodied in +the Original Work as furnished by the Licensor, to make, use, sell and +offer for sale the Original Work and Derivative Works. + +3) Grant of Source Code License. The term "Source Code" means the +preferred form of the Original Work for making modifications to it and +all available documentation describing how to modify the Original +Work. Licensor hereby agrees to provide a machine-readable copy of +the Source Code of the Original Work along with each copy of the +Original Work that Licensor distributes. Licensor reserves the right +to satisfy this obligation by placing a machine-readable copy of the +Source Code in an information repository reasonably calculated to +permit inexpensive and convenient access by You for as long as +Licensor continues to distribute the Original Work, and by publishing +the address of that information repository in a notice immediately +following the copyright notice that applies to the Original Work. + +4) Exclusions From License Grant. Neither the names of Licensor, nor +the names of any contributors to the Original Work, nor any of their +trademarks or service marks, may be used to endorse or promote +products derived from this Original Work without express prior written +permission of the Licensor. Nothing in this License shall be deemed +to grant any rights to trademarks, copyrights, patents, trade secrets +or any other intellectual property of Licensor except as expressly +stated herein. No patent license is granted to make, use, sell or +offer to sell embodiments of any patent claims other than the licensed +claims defined in Section 2. No right is granted to the trademarks of +Licensor even if such marks are included in the Original Work. +Nothing in this License shall be interpreted to prohibit Licensor from +licensing under different terms from this License any Original Work +that Licensor otherwise would have a right to license. + +5) This section intentionally omitted. + +6) Attribution Rights. You must retain, in the Source Code of any +Derivative Works that You create, all copyright, patent or trademark +notices from the Source Code of the Original Work, as well as any +notices of licensing and any descriptive text identified therein as an +"Attribution Notice." You must cause the Source Code for any +Derivative Works that You create to carry a prominent Attribution +Notice reasonably calculated to inform recipients that You have +modified the Original Work. + +7) Warranty of Provenance and Disclaimer of Warranty. Licensor +warrants that the copyright in and to the Original Work and the patent +rights granted herein by Licensor are owned by the Licensor or are +sublicensed to You under the terms of this License with the permission +of the contributor(s) of those copyrights and patent rights. Except +as expressly stated in the immediately proceeding sentence, the +Original Work is provided under this License on an "AS IS" BASIS and +WITHOUT WARRANTY, either express or implied, including, without +limitation, the warranties of NON-INFRINGEMENT, MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY +OF THE ORIGINAL WORK IS WITH YOU. This DISCLAIMER OF WARRANTY +constitutes an essential part of this License. No license to Original +Work is granted hereunder except under this disclaimer. + +8) Limitation of Liability. Under no circumstances and under no legal +theory, whether in tort (including negligence), contract, or +otherwise, shall the Licensor be liable to any person for any direct, +indirect, special, incidental, or consequential damages of any +character arising as a result of this License or the use of the +Original Work including, without limitation, damages for loss of +goodwill, work stoppage, computer failure or malfunction, or any and +all other commercial damages or losses. This limitation of liability +shall not apply to liability for death or personal injury resulting +from Licensor's negligence to the extent applicable law prohibits such +limitation. Some jurisdictions do not allow the exclusion or +limitation of incidental or consequential damages, so this exclusion +and limitation may not apply to You. + +9) Acceptance and Termination. If You distribute copies of the +Original Work or a Derivative Work, You must make a reasonable effort +under the circumstances to obtain the express assent of recipients to +the terms of this License. Nothing else but this License (or another +written agreement between Licensor and You) grants You permission to +create Derivative Works based upon the Original Work or to exercise +any of the rights granted in Section 1 herein, and any attempt to do +so except under the terms of this License (or another written +agreement between Licensor and You) is expressly prohibited by +U.S. copyright law, the equivalent laws of other countries, and by +international treaty. Therefore, by exercising any of the rights +granted to You in Section 1 herein, You indicate Your acceptance of +this License and all of its terms and conditions. + +10) Termination for Patent Action. This License shall terminate +automatically and You may no longer exercise any of the rights granted +to You by this License as of the date You commence an action, +including a cross-claim or counterclaim, for patent infringement (i) +against Licensor with respect to a patent applicable to software or +(ii) against any entity with respect to a patent applicable to the +Original Work (but excluding combinations of the Original Work with +other software or hardware). + +11) Jurisdiction, Venue and Governing Law. Any action or suit relating +to this License may be brought only in the courts of a jurisdiction +wherein the Licensor resides or in which Licensor conducts its primary +business, and under the laws of that jurisdiction excluding its +conflict-of-law provisions. The application of the United Nations +Convention on Contracts for the International Sale of Goods is +expressly excluded. Any use of the Original Work outside the scope of +this License or after its termination shall be subject to the +requirements and penalties of the U.S. Copyright Act, 17 U.S.C. \u00a4 +101 et seq., the equivalent laws of other countries, and international +treaty. This section shall survive the termination of this License. + +12) Attorneys Fees. In any action to enforce the terms of this License +or seeking damages relating thereto, the prevailing party shall be +entitled to recover its costs and expenses, including, without +limitation, reasonable attorneys' fees and costs incurred in +connection with such action, including any appeal of such action. +This section shall survive the termination of this License. + +13) Miscellaneous. This License represents the complete agreement +concerning the subject matter hereof. If any provision of this +License is held to be unenforceable, such provision shall be reformed +only to the extent necessary to make it enforceable. + +14) Definition of "You" in This License. "You" throughout this +License, whether in upper or lower case, means an individual or a +legal entity exercising rights under, and complying with all of the +terms of, this License. For legal entities, "You" includes any entity +that controls, is controlled by, or is under common control with you. +For purposes of this definition, "control" means (i) the power, direct +or indirect, to cause the direction or management of such entity, +whether by contract or otherwise, or (ii) ownership of fifty percent +(50%) or more of the outstanding shares, or (iii) beneficial ownership +of such entity. + +15) Right to Use. You may use the Original Work in all ways not +otherwise restricted or conditioned by this License or by law, and +Licensor promises not to interfere with or be responsible for such +uses by You. + +This license is Copyright (C) 2003 Lawrence E. Rosen. All rights +reserved. Permission is hereby granted to copy and distribute this +license without modification. This license may not be modified +without the express written permission of its copyright owner. + +-- +END OF ACADEMIC FREE LICENSE. The following is intended to describe the essential +differences between the Academic Free License (AFL) version 1.0 and other +open source licenses: + +The Academic Free License is similar to the BSD, MIT, UoI/NCSA and Apache +licenses in many respects but it is intended to solve a few problems with +those licenses. + +* The AFL is written so as to make it clear what software is being +licensed (by the inclusion of a statement following the copyright notice +in the software). This way, the license functions better than a template +license. The BSD, MIT and UoI/NCSA licenses apply to unidentified software. + +* The AFL contains a complete copyright grant to the software. The BSD +and Apache licenses are vague and incomplete in that respect. + +* The AFL contains a complete patent grant to the software. The BSD, MIT, +UoI/NCSA and Apache licenses rely on an implied patent license and contain +no explicit patent grant. + +* The AFL makes it clear that no trademark rights are granted to the +licensor's trademarks. The Apache license contains such a provision, but the +BSD, MIT and UoI/NCSA licenses do not. + +* The AFL includes the warranty by the licensor that it either owns the +copyright or that it is distributing the software under a license. None of +the other licenses contain that warranty. All other warranties are disclaimed, +as is the case for the other licenses. + +* The AFL is itself copyrighted (with the right granted to copy and distribute +without modification). This ensures that the owner of the copyright to the +license will control changes. The Apache license contains a copyright notice, +but the BSD, MIT and UoI/NCSA licenses do not. --- dbus-0.95.orig/debian/shlibs.local +++ dbus-0.95/debian/shlibs.local @@ -0,0 +1 @@ +libdbus-1 3 libdbus-1-3 (>= 0.94) --- dbus-0.95.orig/debian/dbus.postinst +++ dbus-0.95/debian/dbus.postinst @@ -0,0 +1,33 @@ +#!/bin/sh +# -*- coding: utf-8 -*- +# Post-installation script for D-BUS +# Copyright © 2003 Colin Walters +# Copyright © 2006 Sjoerd Simons + +set -e + +MESSAGEUSER=messagebus +MESSAGEHOME=/var/run/dbus + + +chgrp "$MESSAGEUSER" "$MESSAGEHOME" 2>/dev/null || addgroup --system "$MESSAGEUSER" +chown "$MESSAGEUSER"."$MESSAGEUSER" "$MESSAGEHOME" 2>/dev/null || \ + adduser --system --home "$MESSAGEHOME" --no-create-home --disabled-password --ingroup "$MESSAGEUSER" "$MESSAGEUSER" + +if ! dpkg-statoverride --list /usr/bin/dbus-foreground-console; then + chown root:"$MESSAGEUSER" /usr/lib/dbus-1.0/dbus-foreground-console + chmod 4754 /usr/lib/dbus-1.0/dbus-foreground-console +fi + +# Do not restart dbus on upgrades, only on fresh installations +if [ "$1" = "configure" ]; then + if [ -e /var/run/dbus/pid ] && + ps --no-heading -p $(cat /var/run/dbus/pid) > /dev/null; then + # trigger an update notification which recommends to reboot + [ -x /usr/share/update-notifier/notify-reboot-required ] && \ + /usr/share/update-notifier/notify-reboot-required || true + exit 0 + fi +fi + +#DEBHELPER# --- dbus-0.95.orig/debian/rules +++ dbus-0.95/debian/rules @@ -0,0 +1,31 @@ +#!/usr/bin/make -f +# Copyright © 2002,2003 Colin Walters +# Copyright © 2003 Daniel Stone +# Copyright © 2006 Sjoerd Simons + +include /usr/share/cdbs/1/rules/simple-patchsys.mk +include /usr/share/cdbs/1/rules/utils.mk +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/class/autotools.mk + +# List any files which are not installed +common-binary-post-install-arch:: list-missing + +DEB_CONFIGURE_EXTRA_FLAGS := --enable-xml-docs --enable-doxygen-docs + +DEB_SHLIBDEPS_INCLUDE_dbus-1-utils := debian/libdbus-1-3/usr/lib/ + +binary-post-install/dbus:: + mkdir -p debian/dbus/etc/dbus-1/event.d + mkdir -p debian/dbus/etc/X11/Xsession.d + cp debian/dbus-Xsession debian/dbus/etc/X11/Xsession.d/75dbus_dbus-launch + +build/dbus-1-doc:: + doxygen Doxyfile + +clean:: + rm -rf doc/api + rm -f tools/dbus-foreground-console + rm -f test/data/valid-config-files/session.conf + rm -f test/data/valid-config-files/system.conf + --- dbus-0.95.orig/debian/dbus.install +++ dbus-0.95/debian/dbus.install @@ -0,0 +1,16 @@ +debian/tmp/var/run/dbus +debian/tmp/etc/dbus-1/system.conf +debian/tmp/etc/dbus-1/system.d +debian/session.conf etc/dbus-1 +debian/tmp/usr/bin/dbus-daemon +debian/tmp/usr/bin/dbus-cleanup-sockets +debian/tmp/usr/bin/dbus-launch +debian/tmp/usr/bin/dbus-send +debian/tmp/usr/bin/dbus-uuidgen +debian/tmp/usr/share/man/man1/dbus-daemon.1 +debian/tmp/usr/share/man/man1/dbus-cleanup-sockets.1 +debian/tmp/usr/share/dbus-1/services +debian/tmp/usr/share/man/man1/dbus-launch.1 +debian/tmp/usr/share/man/man1/dbus-send.1 +debian/tmp/usr/share/man/man1/dbus-uuidgen.1 +debian/tmp/usr/bin/dbus-foreground-console usr/lib/dbus-1.0 --- dbus-0.95.orig/debian/session.conf +++ dbus-0.95/debian/session.conf @@ -0,0 +1,34 @@ + + + + + + session + + unix:tmpdir=/tmp + + /usr/share/dbus-1/services + + + + + + + + + + + + 60000 + + + session-local.conf + + contexts/dbus_contexts + + --- dbus-0.95.orig/debian/changelog +++ dbus-0.95/debian/changelog @@ -0,0 +1,943 @@ +dbus (0.95-1ubuntu1) feisty; urgency=low + + * Sync with Debian: + + debian/dbus.install, + debian/dbus.postinst, + debian/patches/80-dbus-change-at-console-policy.patch, + debian/rules: + - Add and properly install dbus-foreground-console + + debian/session.conf: + - Raise the service startup timeout from 25 to 60 seconds. It may be too + short on the live CD with too slow machines. + + debian/patches/99_autoreconf.patch: + - Regenerate autotools generated files for the changes + + -- Sebastian Dröge Tue, 7 Nov 2006 22:16:14 +0100 + +dbus (0.95-1) experimental; urgency=low + + * New upstream release (aka 1.0 RC3) + * debian/patches/10_dbus_uuid_in_var.patch, + debian/patches/20_dbus_uuid_world_readable.patch, + debian/patches/30_dbus_send_close_shared_connection.patch: + + Dropped, merged upstream + * debian/patches/99_rerun_automake.patch: + + Not needed anymore because of the above + + -- Sebastian Dröge Sun, 5 Nov 2006 23:22:01 +0100 + +dbus (0.94-2) unstable; urgency=low + + * debian/patches/30_dbus_send_close_shared_connection.patch: + + Don't close shared connection in dbus-send. (Closes: 395358) + Patch from upstream CVS + + -- Sebastian Dröge Thu, 2 Nov 2006 23:55:31 +0100 + +dbus (0.94-1) unstable; urgency=low + + [ Riccardo Setti ] + * Fixed dbus description. (closes: #388186) + * Improved dbus.init script. (closes: #384859) + - Patch from David Härdeman Wed, 25 Oct 2006 11:26:32 +0200 + +dbus (0.93-1) unstable; urgency=low + + * New upstream release + * debian/patches/00_expand_bindir.patch + - Removed. Fixed upstream + * debian/control: Build-depend on libx11-dev, so dbus-launch can monitor X + sessions. + + -- Sjoerd Simons Sat, 16 Sep 2006 23:13:30 +0200 + +dbus (0.92-2) unstable; urgency=low + + * Upload to unstable + * debian/patches/00_expand_bindir.patch + - Added. Ensure the expanded version of $bindir is used for the + DBUS_DAEMONDIR define. Fixes useless warning from dbus-launch (From + upstream CVS) + + -- Sjoerd Simons Thu, 7 Sep 2006 20:30:05 +0200 + +dbus (0.92-1) experimental; urgency=low + + * New upstream release + + -- Sjoerd Simons Sat, 19 Aug 2006 22:13:25 +0200 + +dbus (0.91-1) experimental; urgency=low + + * New upstream release + + First packaged dbus modular release. Bindings are in seperate source + packages now. + * Bumped libdbus-1 soname + * debian/control: Remove all build-depends and definitions for the bindings. + * debian/control: Update to use the official D-Bus spelling + * debian/rules: Remove everything that was needed to build the bindings. + * Remove files not applicable to the D-Bus bus and core libraries: + + debian/python-dbus.install + + debian/monodoc-dbus-1-manual.postinst + + debian/libdbus-qt-1-dev.install + + debian/libdbus-qt4-1-1.install + + libdbus-1-cil.install + + libdbus-qt-1-1c2.install + + libdbus-1-cil.installcligac + + libdbus-glib-1-2.install + + monodoc-dbus-1-manual.install + + libdbus-qt4-1-dev.install + + libdbus-glib-1-dev.install + * Remove all patches not applicable to the D-Bus bus and core libraries: + + debian/patches/dbus-update-automake.patch + + debian/patches/dbus-monoversion.patch + + debian/patches/dbus-no-qt4-examples.patch + + debian/patches/dbus-mono-pkgconfig-location.patch + + debian/patches/dbus-new-monodoc.patch + + -- Sjoerd Simons Mon, 31 Jul 2006 14:50:05 +0200 + +dbus (0.62-5) unstable; urgency=low + + * Update python-dbus to the new Python Policy + * Bump Standards-Version to 3.7.2 + + -- Sebastian Dröge Sat, 8 Jul 2006 01:25:40 +0200 + +dbus (0.62-4) unstable; urgency=low + + [ Sebastian Dröge ] + * add ${shlibs:Depends} to Depends of libdbus-glib-1-dev, as it ships + dbus-binding-tool to /usr/bin/. This fixes a missing libexpat.so.1.0.0. + Thanks to Daniel Holbach for noticing this. + + [ Michael Biebl ] + * debian/libdbus-qt4-1-dev.install: qt/dbus/qdbus.h is only a dummy header + file. Install the real one instead. (Closes: #375298) + + -- Sjoerd Simons Wed, 28 Jun 2006 19:03:23 +0200 + +dbus (0.62-3) unstable; urgency=low + + * Make the Qt4 bindings buid-depend on libqt4-dev (>= 4.1.3) + (Closes: #374802) + * Ensure /etc/dbus-1/system.d is included in the dbus package + (Closes: #374930) + + -- Sjoerd Simons Thu, 22 Jun 2006 18:36:35 +0200 + +dbus (0.62-2) unstable; urgency=low + + * debian/libdbus-qt-1-dev.install: Make the wildcard more strict so that it + doesn't accidentally pickup qt4 files + * debian/libdbus-qt4-1-dev.install: Also install the dbuscpp2xml and + dbusidl2cpp utilities + * debian/session.conf + + Install a custom dbus session.conf. In the generated one some variables + aren't expanded, causing the session bus to fail (Closes: #374747) + * Move libdbus-1-2 to sections libs + * Let libdbus-1-2 recommend dbus. Almost all libdbus-1 using applications + really need the dbus to be present so the recommends is justified. + (Closes: #374726) + * debian/libdbus-qt-1-dev.install: Install all the needed header files. + Thanks to Michael Biebl for testing a KDE4 build against these bindings. + + -- Sjoerd Simons Wed, 21 Jun 2006 10:47:00 +0200 + + + +dbus (0.62-1) unstable; urgency=low + + * New upstream release + * Remove Daniel Stone from uploaders on his request. + * debian/dbus.init: Remove the sleep 1 when restarting. It's not needed as + the start-stop-daemon --retry option is used to shut dbus down + * Removed patched that aren't needed anymore: + + debian/patches/dbus-reload-usercache.patch + + debian/patches/dbus-qt-buildfix.patch + + debian/patches/dbus-qt-endianness.patch + + debian/patches/dbus-0.60-mono-return-null-fix.diff + + debian/patches/dbus-tcp-econreff.patch + + debian/patches/dbus-transport-tcp.patch + + debian/patches/dbus-pendingcall-deadlock.patch + * debian/patches/dbus-update-automake.patch + + Updated + * debian/patches/dbus-no-qt4-examples.patch + + Added. Quick hack to disable the building of the qt4 example binaries. + + -- Sjoerd Simons Tue, 20 Jun 2006 19:35:46 +0200 + +dbus (0.61-6) unstable; urgency=low + + [ Sebastian Dröge ] + * debian/patches/dbus-new-monodoc.patch: + + Call the new monodoc executables for doc generation to really get + docs (Closes: #361541) + * debian/patches/dbus-update-automake.patch: + + updated for the above change + * Add the correct libdbus-glib-1-2 path to the dh_shlibdeps search path to + generate correct dependencies on dbus-1-utils. + * Update libdbus-1-cil to the new CLI policy and use dh_installcligac for + late GAC installation + * debian/patches/dbus-mono-pkgconfig-location.patch: + + Adjust the location of the .dll in the pkg-config file for the new CLI + policy. + + [ Sjoerd Simons ] + * debian/patches/dbus-transport-tcp.patch + + Added. Fixes crash when using the tcp transport without an host option + (from dbus CVS) (Closes: #368894) + * debian/patches/dbus-tcp-econreff.patch + + Added. Make the error which is given when the tcp transport gets a + connection refused more understandable (from dbus CVS) + + -- Sjoerd Simons Wed, 31 May 2006 15:00:49 +0200 + +dbus (0.61-5) unstable; urgency=low + + * debian/patches/dbus-0.60-mono-return-null-fix.diff: + + Added again as this wasn't applied upstream. This makes dbus-sharp + useable again as you don't get null anymore when asking for the session + bus (see fd.o #5716) + + -- Sebastian Dröge Sat, 18 Mar 2006 14:40:48 +0100 + +dbus (0.61-4) unstable; urgency=low + + * debian/patches/dbus-reload-usercache.patch + + Added. Reload the user info cache when reloading the config. + * debian/patches/dbus-pendingcall-deadlock.patch + + Added. Don't block in a poll if the data we're looking for was already + read by another connection. (From dbus CVS) + + -- Sjoerd Simons Sun, 5 Mar 2006 21:27:16 +0100 + +dbus (0.61-3) unstable; urgency=low + + * debian/patches/dbus-monoversion.patch + + Added. Dbus mono assembly version is synced with release version, but + nothing actually changed. This patch changes the assembly version back to + 0.60 to minimize breakage. New version will encode the assembly version + in the package name (e.g libdbus-1-cil-0.61). + + -- Sjoerd Simons Wed, 1 Mar 2006 19:59:47 +0100 + +dbus (0.61-2) unstable; urgency=low + + * debian/patches/dbus-qt-endianness.patch + + Added. Fix FTBS on big-endian architectures + + -- Sjoerd Simons Tue, 28 Feb 2006 00:58:05 +0100 + +dbus (0.61-1) unstable; urgency=medium + + * New upstream release + * debian/patches/dbus-0.60-mono-arguments-fix.diff + - Removed. Fixed upstream + * debian/patches/dbus-0.60-mono-return-null-fix.diff + - Removed. Fixed upstream + * debian/patches/dbus-moc-selection.patch + - Removed. Fixed upstream + * debian/patches/dbus-qdbusmarshall-amd64.patch + - Removed. Fixed upstream + * Update cli-common depend to >= 0.2.0. Older versions have known bugs + * Let binary-predeb/libdbus-1-cil:: depend on + common-binary-post-install-arch, so dh_clideps can do it's work correctly. + * debian/patches/dbus-qt-buildfix.patch + + Added. Fix compilation of the Qt bindings (from CVS) + * debian/patches/dbus-update-automake.patch + + Added. Do a new autogen run, because the qt patch patches autotools + files + + -- Sjoerd Simons Fri, 24 Feb 2006 22:09:17 +0100 + +dbus (0.60-6) unstable; urgency=low + + * Sync relavant changes from ubuntu + + dbus-0.60-mono-arguments-fix.diff + - Added. 64bit fixes ((fd.o bugzilla #4410) + + dbus-0.60-mono-return-null-fix.diff + - Added. Don't return null for the session bus (fd.o bugzilla #5716) + + Send the update-notifier reboot required notification if it's installed + + Build mono bindings as arch indep. + + -- Sjoerd Simons Thu, 16 Feb 2006 12:32:31 +0100 + +dbus (0.60-5) unstable; urgency=low + + * Fix a bashim in the postinst script (Closes: #347453) + + -- Sjoerd Simons Wed, 11 Jan 2006 20:15:02 +0100 + +dbus (0.60-4) unstable; urgency=low + + * Upload to unstable + + -- Sjoerd Simons Thu, 5 Jan 2006 21:55:49 +0100 + +dbus (0.60-3) experimental; urgency=low + + * debian/patches/dbus-qdbusmarshall-amd64.patch + + Fix build failure on amd64 (Closes: #343746) + * Ignore the exit code of run-parts in the init script. + + -- Sjoerd Simons Thu, 5 Jan 2006 12:30:26 +0100 + +dbus (0.60-2) experimental; urgency=low + + * Let python2.4-dbus depend on python2.4-libxml2 (Closes: #343715) + * Changed maintainer address to + pkg-utopia-maintainers@lists.alioth.debian.org + + -- Sjoerd Simons Thu, 15 Dec 2005 20:01:11 +0100 + +dbus (0.60-1) experimental; urgency=low + + * New upstream release + * Soname of libdbus-1 and libdbus-glib-1 were bumped to 2 + * debian/patches/dbus-reloadconfig-reply.patch + + Removed. Merged upstream + * debian/patches/dbus-monitor.patch + + Removed. Merged upstream + * debian/patches/dbus-make-libtool-safe.patch + + Removed. Fixed upstream + * debian/patches/dbus-moc-selection.patch + + Added. Enable the Qt moc paths to be specified to configure + * Depend on lsb-base >= 3.0 + * Let dbus conflicht with libdbus-1-1 and libdbus-1-2 with dbus << 0.60. + Some bus changes could result in strange bugs when mixing the old libs + with the new bus. + + -- Sjoerd Simons Wed, 14 Dec 2005 19:53:07 +0100 + +dbus (0.50-3) experimental; urgency=low + + * Also move dbus-launch and dbus-send manpages to the dbus package + * debian/dbus.init + + Make force-reload an alias of reload instead of restart + + -- Sjoerd Simons Mon, 21 Nov 2005 11:17:57 +0100 + +dbus (0.50-2) experimental; urgency=low + + * maintainance is actually spelled "maintenance" (Closes: #332238) + * Disable --enable-verbose because of the big performance hit + * Move dbus-binding-tool from dbus-1-utils to libdbus-glib-1-dev + * Move dbus-launch and dbus-send into the dbus package (Closes: #337212) + * Move the /etc/X11/Xsession.d/ script from dbus-1-utils to dbus + * Add reload function to the init script + * Use log_daemon_msg instead of log_begin_msg in the init script where + applicable + * debian/patches/dbus-reloadconfig-reply.patch + + Added. Send a reply message when org.freedesktop.DBus.ReloadConfig is + called + * Prefix the long description of monodoc-dubs-1-manual with one space + instead of two (Closes: #337032) + * Add LSB formatted dependency info in the init script (Closes: #337644) + + -- Sjoerd Simons Wed, 9 Nov 2005 20:02:09 +0100 + +dbus (0.50-1) experimental; urgency=low + + * New upstream release + + -- Sjoerd Simons Thu, 8 Sep 2005 10:01:21 +0200 + +dbus (0.36.2-1) experimental; urgency=low + + * New upstream release + * Fix descriptions to refer to dbus rather than dbus-1. + * Make dbus-1-utils depend on dbus + * debian/patches/dbus-sessionbus-checkuid.patch + + Removed. Fixed upstream + + -- Sjoerd Simons Tue, 6 Sep 2005 09:26:19 +0200 + +dbus (0.36.1-1) experimental; urgency=low + + * New upstream release (Closes: #319593, #324016) + * debian/patches/dbus_cmsgcred.patch + + Removed. Fixed upstream. + * debian/patches/dbus-gilstate.patch + + Removed. Fixed upstream. + * Sync with the ubuntu package + + Remove dbus_bindings.{a,la} from python2.4-dbus + + debian/patches/dbus-make-libtool-safe.patch + - Added. Replace explicit libtool calls with $(LIBTOOL) in + glib/Makefile.* + + Don't include the .la files in the dev packages. + + Don't restart dbus on upgrade. Too many applications don't handle it + correctly. + + Switched the init script to lsb-base + + Ship dbus-binding-tool and dbus-viewer with dbus-1-utils + + -- Sjoerd Simons Fri, 26 Aug 2005 21:58:42 +0200 + +dbus (0.34-4) experimental; urgency=low + + * libdbus-1-cil improvements based on comments from Mirco Bauer + + Call dh_clideps before dh_makeclilibs + + libdbus-1-cil can be arch all + + Use CLI instead of .NET in the package description + * Add debian/patches/dbus-sessionbus-checkuid.patch: + - bus/session.conf.in: Do not allow any user to connect to any session bus + by default. + - bus/policy.c: "allowed" now defaults to true if the connecting user id + matches the session bus user id. + - This stops other users from listening and sending to other user's + session dbus instances. + - References: + CAN-2005-0201 + https://bugs.freedesktop.org/show_bug.cgi?id=2436 + * debian/patches/dbus-gilstate: Fix segfaults in python bindings. + Patch by Anthony Baxter. + * Add D-BUS monodoc documentation package + * C++ transition + + -- Sjoerd Simons Mon, 11 Jul 2005 10:22:44 +0200 + +dbus (0.34-3) experimental; urgency=low + + * Build-depend on python-pyrex instead of python2.3-pyrex + * debian/dbus.postinst + + Forgot to rename dbus-1 to dbus in the previous package. + * Rename libdbus-cil to libdbus-1-cil + + -- Sjoerd Simons Wed, 22 Jun 2005 18:53:22 +0200 + +dbus (0.34-2) experimental; urgency=low + + * debian/dbus.init + + The even.d dir is in /etc/dbus-1 not in /etc/dbus + + -- Sjoerd Simons Tue, 21 Jun 2005 16:16:43 +0200 + +dbus (0.34-1) experimental; urgency=low + + * New upstream release + * Build libdbus-cil on amd64 too (Closes: #314247) + * Python bindings need python2.4, so build them against python2.4. + + -- Sjoerd Simons Mon, 20 Jun 2005 13:07:04 +0200 + +dbus (0.33-1) experimental; urgency=low + + * New upstream release (Closes: #299049) + * Redone the package names to be much more sane. + - Based on ubuntu's dbus 0.33 package by Daniel Stone. + - dbus deamon goes into the dbus package instead of dbus-1 + - glib bindings in libdbus-glib-1-1 instead of dbus-glib-1 + - qt bindings in libdbus-qt-1-1 instead of dbus-qt-1 + - Library component from dbus-1 goed into libdbus-1-1 + * debian/patches/dbus-fixverbose.patch + - Removed. Fixed upstream + * debian/patches/dbus-getpwname.patch + - Removed. Fixed upstream + * debian/patches/fix-policy-group.patch + - Removed. Not relevant anymore + + -- Sjoerd Simons Mon, 20 Jun 2005 11:12:12 +0200 + +dbus (0.23.4-2) unstable; urgency=low + + * Upload version with QT and Mono bindings to unstable. (Closes: #271895) + (Closes: #271896) (Closes: #260044) (Closes: #290622) + * debian/patches/dbus_cmsgcred.patch + - Added. Fix syntax error on systems where HAVE_CMSGCRED is defined + (Thanks to Michael Banck) (Closes: #311726) + + -- Sjoerd Simons Mon, 6 Jun 2005 22:48:08 +0200 + +dbus (0.23.4-1bindings0) experimental; urgency=low + + * Enable Mono and QT bindings. + + -- Sjoerd Simons Tue, 5 Apr 2005 22:15:29 +0200 + +dbus (0.23.4-1) unstable; urgency=low + + * New upstream release + * debian/patches/dbus-abi-api.patch + - Removed, fixed upstream + * debian/patches/dbus-python-fix.patch + - Removed, fixed upstream + * debian/patches/fix-policy-group.patch + - Stop segfaulting at " tags (Closes: #297495) + * debian/patches/dbus-fixverbose.patch + - Fix inaccurate messages in the debug output of the uid/gid lookup code + (Thanks to Tom Parker) (Closes: #297497) + * debian/patches/dbus-getpwname.patch + * Add .la files in the -dev packages (Closes: #297936) + + -- Sjoerd Simons Wed, 30 Mar 2005 23:02:00 +0200 + +dbus (0.23.2-3) unstable; urgency=low + + * debian/patches/dbus-abi-api.patch + - Fix dbus api and abi breakage between 0.23.1 and 0.23.2 (Closes: #297020) + + -- Sjoerd Simons Mon, 28 Feb 2005 15:05:19 +0100 + +dbus (0.23.2-2) unstable; urgency=low + + * debian/patches/dbus-python-fix.patch + - Fix python bindings (Based on dbus CVS fix) + + -- Sjoerd Simons Thu, 24 Feb 2005 11:19:03 +0100 + +dbus (0.23.2-1bindings0) experimental; urgency=low + * debian/patches/dbus-monofixes.patch + + Removed. Fixed in this release + + -- Sjoerd Simons Thu, 17 Feb 2005 13:24:22 +0100 + +dbus (0.23.2-1) unstable; urgency=low + * New upstream release + + -- Sjoerd Simons Wed, 23 Feb 2005 13:04:21 +0100 + +dbus (0.23.1-1bindings0) experimental; urgency=low + + * New upstream release + * debian/patches/dbus-monofixes.patch + + Added. Some mono fixes from dbus cvs + + -- Sjoerd Simons Thu, 17 Feb 2005 13:24:22 +0100 + +dbus (0.23-1mono1) experimental; urgency=low + + * Enable the qt bindings. Thanks to Kevin Ottens + (Closes: #271895) (Closes: #271896) (Closes: #290622) + + -- Sjoerd Simons Sat, 22 Jan 2005 13:53:27 +0100 + +dbus (0.23-1mono0) experimental; urgency=low + + * Enable the mono bindings + + -- Sjoerd Simons Fri, 14 Jan 2005 17:54:26 +0100 + +dbus (0.23-1) unstable; urgency=low + + * New upstream release + * Disable the mono bindings for the unstable packages untill mono goes into + testing. + + -- Sjoerd Simons Fri, 14 Jan 2005 15:22:20 +0100 + +dbus (0.22+cvs.20050104-1) experimental; urgency=low + + * CVS snapshot + * Package the dbus mono bindings for i386, powerpc and s390. Mostly based on + patches from Edd Dumbill. (Closes: #260044) + + -- Sjoerd Simons Wed, 5 Jan 2005 18:20:47 +0100 + +dbus (0.22-4) unstable; urgency=low + + * Let the initscript check if the pid in the pidfile actually corresponds + to a dbus daemon process (Closes: #285758) + + -- Sjoerd Simons Wed, 5 Jan 2005 16:55:45 +0100 + +dbus (0.22-3) unstable; urgency=medium + + * Actually ship the init script improvements mentioned in the previous + upload. (please pass the brown paper bag) + * Call run-parts --reverse on the event.d dir when stopping dbus + (Closes: #269283) + + -- Sjoerd Simons Sat, 6 Nov 2004 16:17:40 +0100 + +dbus (0.22-2) unstable; urgency=medium + + * debian/patches/dbus-monitor.patch + + Updated. Unbreak dbus-monitor when arguments are given. (From the ubuntu + dbus package) + * Use run-parts --arg instead of -a, which works with woody's run-parts + (Closes: #269708) (Closes: #274702) + * Use start-stop-daemon --retry when stopping to ensure the system bus + stopped. Prevents race conditions with the dbus pidfile (Closes: #277148) + * Add myself to Uploaders + * Acknowledge my own NMU (Closes: #272862) + + -- Sjoerd Simons Tue, 02 Nov 2004 12:19:47 +0100 + +dbus (0.22-1.1) unstable; urgency=high + + * Non-maintainer upload with maintainers permission + * debian/patches/dbus-python-64bit.patch + + Added. Taken from dbus cvs. Add support for int64 and uint64 to the + python bindings (Closes: #272862) + * Urgency high because the hal package depending on this fix fixes RC bugs. + + -- Sjoerd Simons Sat, 25 Sep 2004 17:45:33 +0200 + +dbus (0.22-1) unstable; urgency=high + + * New upstream release. + + Urgency high so it slips into sarge before the freeze. + + -- Daniel Stone Tue, 17 Aug 2004 00:42:56 +0100 + +dbus (0.21-7) unstable; urgency=low + + * Created /etc/dbus-1/event.d/ and added support to dbus' init script + to run the files in it on stop/start/restart + + -- Daniel Silverstone Thu, 22 Jul 2004 14:13:44 +0100 + +dbus (0.21-6) unstable; urgency=low + + * Add a chown,chgrp to the init script to make sure the pid dir is owned + by the messagebus user. + * Modify the dbus-1 init script to remove some arguments from the invocation + of start-stop-daemon so that it will work when being asked to stop a + dbus instance which has a different executable to that installed. + + -- Daniel Silverstone Mon, 12 Jul 2004 21:56:45 +0100 + +dbus (0.21-5) unstable; urgency=low + + * Change debian/control to indicate that dbus is group maintained. + * Build-depend on the version of python2.3-pyrex which theoretically has + the fixed patch for coping with unsigned long int vs. long unsigned int + * Removed the seddery introduced in 0.21-2 because the above build-depend + change should ensure we're safe. + + -- Daniel Silverstone Mon, 5 Jul 2004 17:44:06 +0100 + +dbus (0.21-4) unstable; urgency=low + + * Updated debian/copyright to the AFL 2.0 closes: #239332 + * Updated debian/dbus-1.init to create /var/run/dbus if it + doesn't already exist. closes: #242639 + + -- Daniel Silverstone Fri, 18 Jun 2004 00:20:27 +0100 + +dbus (0.21-3) unstable; urgency=low + + * Add the sed call to Makefile.in too. Damn my forgetfulness. + + -- Daniel Silverstone Wed, 16 Jun 2004 18:06:28 +0100 + +dbus (0.21-2) unstable; urgency=low + + * Add a sed -e's/long unsigned/unsigned long/g' to the python bindings + preparation line. This *should* solve the FTBFS on alpha, s390 and ia64 + * Also, fix an a-umlaut to 'ae' in the changelog to prevent nasty + debian-changelog-file-uses-obsolete-national-charset errors from lintian + + -- Daniel Silverstone Tue, 15 Jun 2004 19:26:12 +0100 + +dbus (0.21-1) unstable; urgency=low + + * New upstream version. + + Fixes varargs crap - cleaner patch from David Zeuthen applied. (closes: + #229274) + * Added provides/replaces/conflicts on dbus-1-utils << 0.20-4, per -4's + moving of manpages. + + -- Daniel Stone Sun, 21 Mar 2004 02:42:53 +1100 + +dbus (0.20-6) unstable; urgency=low + + * Add a touch of usage information to the top of the dbus Xsession.d file. + Also since we've had confirmation that this file does enough, this version + closes: #230835 + * Add an extra rm -f $PIDFILE to /etc/init.d/dbus-1 to help on restart. + closes: #229609 + * Temporarily quiesce error reports in system.d/*.conf files when loading. + This breaks the standard that the daemon shouldn't start with malformed + configuration files, but at least for now it seems sensible to do. + closes: #230231 + NOTE: this is likely to be removed in a future version of dbus after the + configuration file syntax stabilises. Please report bugs against packages + which have configs which fail to parse with the latest dbus package. + + -- Daniel Silverstone Tue, 10 Feb 2004 00:46:52 +0000 + +dbus (0.20-5) unstable; urgency=low + + * Add an /etc/X11/Xsession.d/ entry to launch a session bus. + You will need to add 'use-session-dbus' to your /etc/X11/Xsession.options + file to enable it. + + -- Daniel Silverstone Tue, 3 Feb 2004 18:15:48 +0000 + +dbus (0.20-4) unstable; urgency=low + + * Ensure the manpages are installed into the right package. + * Add /usr/lib/dbus-1.0/services to the dbus-1 package. (closes: #230413) + * dbus-glib-1-dev now depends on libglib2.0-dev which is kinda needed in order + to get glib-object.h + * Removed the dbus-qt-1 and dbus-qt-1-dev packages until upstream actually + do something with the binding (like putting some code into it) + + -- Daniel Silverstone Sun, 1 Feb 2004 22:22:59 +0000 + +dbus (0.20-3) unstable; urgency=high + + * Urgency high because the old package was virtually useless. + * debian/patches/fix-varargs-usage.diff: + + Merged patch from Michel Daenzer (thanks Michel!) to fix varargs usage, + so we don't segfault on --system anymore. (closes: #229274, #229005, + #229609) + + -- Daniel Stone Wed, 28 Jan 2004 06:51:07 +1100 + +dbus (0.20-2) unstable; urgency=low + + * The "gotta keep the ftpmaster cab^Whappy release". + + Hey, I need the overrides ... + * debian/python2.3-dbus.install: + + Stop installing .a and .la files (thanks Daniel Silverstone). + * debian/dbus-qt-1-dev.install: + + Install the .la file ... yep, Daniel Silverstone + * debian/patches/dbus-monitor.patch: + + Patch from Daniel Silverstone to add suport for filters to dbus-monitor: + only watch for certain events. + * debian/rules: + + Add --enable-verbose-mode to make debugging far more easier. + - Daniel Silverstone strikes again! + + -- Daniel Stone Wed, 21 Jan 2004 11:07:37 +1100 + +dbus (0.20-1) unstable; urgency=low + + * New upstream release (closes: #223400). + + This version includes Qt and Python support. + - New packages: dbus-1-qt, python2.3-dbus. + * debian/dbus-1.postinst: + + Call addgroup with --system so it doesn't get a userspace GID. + (closes: #222563) + * debian/control, debian/rules: + + Start building Qt and Python bindings. + * debian/patches/dbus-python-signals-dze.patch: + + Merged patch (already applied in HEAD) to enhance signal support in the + Python interface; available from + http://freedesktop.org/~david/dbus-python-signals-dze.patch. + + -- Daniel Stone Sat, 6 Dec 2003 00:17:50 +1100 + +dbus (0.13-1) unstable; urgency=low + + * New upstream release. + * debian/control: + + Update Maintainer address to debian.org. + + Add Recommends: dbus-glib-1 to dbus-1-utils, for the dbus-monitor + program. (closes: #213914) + + -- Daniel Stone Wed, 22 Oct 2003 13:54:53 +1000 + +dbus (0.12-4) unstable; urgency=low + + * debian/control: + + Taking over from Colin as maintainer. + + Bump debhelper Build-Dep to >=4.1.46, when dh_installlogcheck was first + introduced. + + Bump Standards-Version to 3.6.1. + + Add Replaces/Provides/Conflicts on earlier dbus-1 versions to + dbus-1-utils. + * debian/dbus-1.init: + + Clean up after the daemon's pidfile mess, ensuring smooth upgrades. + (closes: #209143) + + -- Daniel Stone Mon, 22 Sep 2003 12:13:06 +1000 + +dbus (0.12-3) unstable; urgency=low + + * debian/control: + - Break out utilities into separate dbus-1-utils package. + + -- Colin Walters Sat, 30 Aug 2003 20:07:28 -0400 + +dbus (0.12-2) unstable; urgency=low + + * debian/control: + - [dbus-1] Add Depends on adduser (Closes: #204871) + + -- Colin Walters Sun, 10 Aug 2003 22:23:36 -0400 + +dbus (0.12-1) unstable; urgency=low + + * New upstream release. + * debian/control: + - Bump Standards-Version to 3.6.0, no changes required. + + -- Colin Walters Wed, 6 Aug 2003 01:50:13 -0400 + +dbus (0.11+cvs200307017-1) unstable; urgency=low + + * New upstream CVS snapshot. + - Creates services directory (Closes: #198433) + + -- Colin Walters Thu, 17 Jul 2003 19:05:37 -0400 + +dbus (0.11+cvs20030528-2) unstable; urgency=low + + * debian/rules: + - Include utils.mk. + + -- Colin Walters Thu, 29 May 2003 02:14:29 -0400 + +dbus (0.11+cvs20030528-1) unstable; urgency=low + + * New upstream CVS snapshot. + * debian/control: + - Build-Depend on latest cdbs to get some minor fixes. + + -- Colin Walters Wed, 28 May 2003 16:56:29 -0400 + +dbus (0.11-2) unstable; urgency=low + + * debian/control: + - Add Build-Depends on cdbs, just because it's so freaking sweet. + * debian/rules: + - Convert to CDBS. + * debian/rocks: + - Removed. + + -- Colin Walters Mon, 19 May 2003 19:21:33 -0400 + +dbus (0.11-1) unstable; urgency=low + + * The "Bill Gates Grants Self 18 Dexterity, 20 Charisma" release. + * New upstream release. + * debian/control: + - Bump Standards-Version to 3.5.10, no changes required. + * debian/rocks: + - No need to create system.d anymore, upstream does it now. + + -- Colin Walters Thu, 15 May 2003 22:01:23 -0400 + +dbus (0.10+cvs20030503-2) unstable; urgency=low + + * The "I've Got To Stop Taking Lives So Seriously" release. + * debian/control: + - Add Build-Depends on docbook-utils. + + -- Colin Walters Sat, 3 May 2003 16:58:20 -0400 + +dbus (0.10+cvs20030503-1) unstable; urgency=low + + * The "Chimp Study On Human-Evasion Response To Feces-Hurling Nearly + Complete" release. + * New upstream snapshot. + - Includes some of my patches; this will among other things make + the system bus go again. + * debian/rocks: + - Add --enable-docs to DEB_CONFIGURE_EXTRA_FLAGS. + * debian/dbus-1-dev.install: + - Update to handle new upstream .pc name. + * debian/rules: + - Update to latest version of Colin's Build System. + + -- Colin Walters Sat, 3 May 2003 03:58:53 -0400 + +dbus (0.10-1) unstable; urgency=low + + * The "West-Wing Tech-Support' Crew Be A Buncha Wack Bitches" release. + * New upstream release. + * debian/dbus-1.install: + - Install all binaries. + * debian/dbus-1-dev.install: + - Install headers from /usr/lib/dbus-1.0 too. + * debian/rocks: + - Create etc/dbus-1/system.d. + + -- Colin Walters Mon, 28 Apr 2003 17:29:50 -0400 + +dbus (0.9-2) unstable; urgency=low + + * The "New Fox Reality Show To Determine Ruler Of Iraq" release. + * debian/rocks: + - Generate API docs via doxygen (Closes: #185470) + * debian/control: + - Build-Depend on doxygen. + * debian/dbus-1-doc.install: + - Install docs in correct place. + - Install newly generated doxygen docs. + * debian/rules: + - Update to latest version of Colin's Build System. + - Eagerly await ftpmaster installing build-common. + + -- Colin Walters Wed, 23 Apr 2003 23:40:00 -0400 + +dbus (0.9-1) unstable; urgency=low + + * The "Starbucks To Begin Sinister 'Phase Two' Of Operation" release. + * New upstream release. + * debian/control: + - Drop "lib*" prefix from all packages, and change suffix from "0" to "-1". + D-BUS isn't technically just a shared library; it also includes a + daemon. This could really go either way; I could just put the daemon + in the libdbus0 package and be done with it, but I think that's more + confusing in the end, since people have been very conditioned to + expect libfoo -> just shared library. + - Add Conflicts: and Replaces: on older lib* packages. + - Remove Provides and Conflicts on libdbus-dev in new dbus-1-dev + package, since they are actually parallel installable. + - Ditto for libdbus-glib0-dev. + - Touch up descriptions. + - Update to Standards-Version: 3.5.9; no changes required. + - Add libexpat-dev to Build-Depends. + * debian/dbus0.init: + - New file; runs the D-BUS daemon. + * debian/dbus0.default: + - New file. + * debian/dbus0.postinst: + - New file; creates the messagebus user and stuff. + * debian/dbus0.install: + - Install configuration files. + * debian/rocks: + - Add --with-xml=expat. + - Update to correspond with changes to debian/control. + - Make dbus-glib-1 package be built after dbus-1 package. + - Add debian/dbus-1/usr/lib to DEB_SHLIBDEPS_INCLUDE_dbus-glib-1 so we + pick up the right shlibs. + * debian/rules: + - Update to latest version of Colin's Build System. + + -- Colin Walters Sun, 13 Apr 2003 23:40:29 -0400 + +dbus (0.6-1) unstable; urgency=low + + * New upstream release. + * debian/control: + - [libdbus0] Flesh out description somewhat. + + -- Colin Walters Tue, 18 Mar 2003 10:50:42 -0500 + +dbus (0.5-2) unstable; urgency=low + + * debian/libdbus0-dev.install: + - Don't include dbus-glib-1.0.pc. + - Don't include dbus-glib-1.a or .so. + + -- Colin Walters Thu, 6 Mar 2003 23:17:53 -0500 + +dbus (0.5-1) unstable; urgency=low + + * Initial version (Closes: #183739) + + -- Colin Walters Thu, 6 Mar 2003 17:58:06 -0500