render project shuts down
Hello when i render my project it shuts down while rendering. What can I do ?
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
HI,
What give you the terminal output ?
Which effect 3D do you use ?
could you repeat each time this action ,?
Is it the same ?
What is your Hardware configuration ?
Thanks.
Revision history for this message
|
#2 |
Hello,
Terminal Output:
=============
-------
OpenShot (version 1.3.0)
-------
state saved
Not the primary instance of OpenShot. Not starting queue watcher thread.
on_mnuOpenProje
on_mnuOpenProje
project modified: Opened project
state saved
NEW SDL CONSUMER
/usr/lib/
canvasImageTr
/usr/lib/
self.
on_mnuRemoveCli
project modified: Removed clip
state saved
on_mnuRemoveCli
project modified: Removed clip
state saved
on_mnuRemoveTra
project modified: Removed transition
state saved
on_tlbMakeMovie
on_cboExportTyp
on_cboUploadSer
on_cboProjectTy
on_cboExportTo_
on_btnExportVid
NEW SDL CONSUMER
Autosaving...
project saved! - 2010_OSJahresrü
Exception in thread Thread-2:
Traceback (most recent call last):
File "/usr/lib/
self.run()
File "/usr/lib/
if self.project.
AttributeError: 'NoneType' object has no attribute 'frmExportVideo'
Speicherzugriff
effetc 3D
========
I dont use such an effect
repeat the action
==============
Yes each time I render my project the programm crashes. Yes it is the same.
Hardware configuation
==================
H/W path Device Class Description
=======
/0 bus 785GT-E63(MS-7551)
/0/0 memory 64KiB BIOS
/0/4 processor AMD Athlon(tm) II X2 240e Processor
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/25 memory 4GiB System Memory
/0/25/0 memory 2GiB DIMM DDR2 Synchronous 400 MHz
/0/25/1 memory 2GiB DIMM DDR2 Synchronous 400 MHz
/0/100 bridge RS780 Host Bridge Alternate
/0/100/1 bridge RS780 PCI to PCI bridge (int gfx)
/0/100/1/5 display RS880 [Radeon HD 4200]
/0/100/5 bridge RS780 PCI to PCI bridge (PCIE port
/0/100/5/0 eth0 network RTL8111/8168B PCI Express Gigabit E
/0/100/11 scsi2 storage SB700/SB800 SATA Controller [IDE mo
/0/100/11/0.0.0 /dev/sda disk 1TB WDC WD10EADS-65M
/0/100/11/0.0.0/1 /dev/sda1 volume 500GiB EXT4 volume
/0/100/11/0.0.0/2 /dev/sda2 volume 400GiB EXT4 volume
/0/100/11/0.0.0/3 /dev/sda3 volume 31GiB Linux swap volume
/0/100/12 bus SB700/SB800 USB OHCI0 Controller
/0/100/12.1 bus SB700 USB OHCI1 Controller
/0/100/12.2 bus SB700/SB800 USB EHCI Controller
/0/100/13 bus SB700/SB800 USB OHCI0 Controller
/0/100/13.1 bus SB700 USB OHCI1 Controller
/0/100/13.2 bus SB700/SB800 USB EHCI Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.1 scsi0 storage SB700/SB800 IDE Controller
/0/100/14.1/0.0.0 /dev/cdrom disk DVD-RAM GH22NP20
/0/100/14.1/0.0.0/0 /dev/cdrom disk
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB700/SB800 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/5 multimedia CA0106 Soundblaster
/0/100/14.5 bus SB700/SB800 USB OHCI2 Controller
/0/101 bridge Family 10h Processor HyperTransport
/0/102 bridge Family 10h Processor Address Map
/0/103 bridge Family 10h Processor DRAM Controlle
/0/104 bridge Family 10h Processor Miscellaneous
/0/105 bridge Family 10h Processor Link Control
/0/1 scsi6 storage
/0/1/0.0.0 /dev/sdb disk SCSI Disk
/0/1/0.0.1 /dev/sdc disk SCSI Disk
/0/1/0.0.2 /dev/sdd disk SCSI Disk
/0/1/0.0.3 /dev/sde disk SCSI Disk
/0/2 scsi7 storage
/0/2/0.0.0 /dev/sdf disk 160GB SCSI Disk
/0/2/0.0.0/1 /dev/sdf1 volume 149GiB Windows NTFS volume
/0/3 scsi8 storage
/0/3/0.0.0 /dev/sdg disk 500GB SCSI Disk
/0/3/0.0.0/1 /dev/sdg1 volume 465GiB EXT4 volume
/1 vboxnet0 network Ethernet interface
Hope this will help ? Thank you for your answer ,,,,
Greetings Michael
Revision history for this message
|
#3 |
Do you use the Medibuntu version of FFmpeg ?
What is your video format of your input files ?
Check all your dependencies (see here : http://
Have you modified the sdl output in the preferences ? If yes change again (return at this one by default)
What is your format video output ?
Revision history for this message
|
#4 |
Hello,
I removed the existing FFMPeg and installed again the version of Medibuntu, output format is MP4(h264). Inputformat is only pictures (jpg). I had some videos in the projekt but I removed them alle from the timeline. But it crashes anyway while rendering.
I checked all the dependencies. The sdl output is not modified.
What can i do ?
Revision history for this message
|
#5 |
Try to delete the hidden folder by rm .openshot. And create another project. Don't worry, it will be re-create at the first run of Openshot.
Revision history for this message
|
#6 |
Thank you, I tried it, but when i render my project it crashes again at 75% of the rendering process :( Any ideas ?
Revision history for this message
|
#7 |
Could you be able to use gdb and re-done the same operation ? See here how to use it : http://
IF yes put here the output of the terminal. Thanks.
Revision history for this message
|
#8 |
This seems to make also problems:
mbokor@linux:~$ gdb python
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
(gdb) run /usr/share/
Starting program: /usr/bin/python /usr/share/
[Thread debugging using libthread_db enabled]
/usr/bin/python: can't open file '/usr/share/
Program exited with code 02.
(gdb) ^Z
[1]+ Angehalten gdb python
mbokor@linux:~$ sudo gdb python
[sudo] password for mbokor:
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
(gdb) run /usr/share/pyshared
pyshared/ pyshared-data/
(gdb) run /usr/share/
Starting program: /usr/bin/python /usr/share/
[Thread debugging using libthread_db enabled]
/usr/bin/python: can't open file '/usr/share/
Program exited with code 02.
(gdb) run /usr/share/
Starting program: /usr/bin/python /usr/share/
[Thread debugging using libthread_db enabled]
/usr/bin/python: can't open file '/usr/share/
Program exited with code 02.
(gdb) run /usr/share/
Starting program: /usr/bin/python /usr/share/
[Thread debugging using libthread_db enabled]
/usr/bin/python: can't open file '/usr/share/
Program exited with code 02.
(gdb)
Revision history for this message
|
#9 |
HI,
Sorry for the delay. i was having lost your ..........mail. I wasn't remember who was asking me how to run gdb.
In fact, I will modified the documentation how to use gdb because I have done a mistake. Like we are using some development versions, we are using it like it is explain in the documentation. But on a normal installation (like you) it is a bit different because you must precise the correct path .
I explain : you must know the path where openshot is run by the command whereis. After you must go (in a terminal) to this folder and only after run gdb like it is explained in the documentation. So , that gives you that :
How to know the path/got to this one/run gdb/run openshot with
olivier@Triton:~$ whereis openshot
openshot: /usr/bin/openshot /usr/share/
olivier@Triton:~$ cd /usr/bin/openshot
bash: cd: /usr/bin/openshot: N'est pas un dossier
olivier@Triton:~$ cd /usr/bin
olivier@
GNU gdb (GDB) 7.1-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
done.
(gdb) run openshot
Starting program: /usr/bin/python openshot
[Thread debugging using libthread_db enabled]
-------
OpenShot (version 1.3.0)
-------
Process no longer exists: 27375. Creating new pid lock file.
[New Thread 0x7fffeb4a5700 (LWP 6791)]
[New Thread 0x7fffd2bf5700 (LWP 6800)]
state saved
[New Thread 0x7fffd23f4700 (LWP 6801)]
[New Thread 0x7fffcd9f0700 (LWP 6802)]
[Thread 0x7fffcd9f0700 (LWP 6802) exited]
[New Thread 0x7fffcd9f0700 (LWP 6804)]
[New Thread 0x7fffd1841700 (LWP 6805)]
[New Thread 0x7fffd0a37700 (LWP 6806)]
[New Thread 0x7fffd0135700 (LWP 6807)]
[New Thread 0x7fffced76700 (LWP 6808)]
I hope that more clear. Me i am going to modifie the documentation about this.
Revision history for this message
|
#10 |
Hi,
when I do this I receive the following output:
mbokor@linux:~$ whereis openshot
openshot: /usr/bin/openshot /usr/share/
mbokor@linux:~$ cd /usr/bin/openshot
bash: cd: /usr/bin/openshot: Ist kein Verzeichnis
mbokor@linux:~$ cd /usr/bin/open
openoffice.org openshot openshot-render openssl
mbokor@linux:~$ cd /usr/bin/open
openoffice.org openshot openshot-render openssl
mbokor@linux:~$ cd /usr/bin/openshot
bash: cd: /usr/bin/openshot: Ist kein Verzeichnis
mbokor@linux:~$ cd /usr/bin
mbokor@
lrwxrwxrwx 1 root root 7 2011-03-05 14:02 openoffice.org -> ooffice
-rwxr-xr-x 1 root root 2503 2011-02-14 07:35 openshot
-rwxr-xr-x 1 root root 2524 2011-02-14 07:35 openshot-render
-rwxr-xr-x 1 root root 449120 2011-02-10 02:52 openssl
mbokor@
-------
OpenShot (version 1.3.0)
-------
Process no longer exists: 4395. Creating new pid lock file.
state saved
on_frmMain_destroy
mbokor@
/usr/bin
mbokor@
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
(gdb) run openshot
Starting program: /usr/bin/python openshot
[Thread debugging using libthread_db enabled]
-------
OpenShot (version 1.3.0)
-------
Process no longer exists: 2745. Creating new pid lock file.
[New Thread 0x7fffeb3a4700 (LWP 2962)]
[New Thread 0x7fffd918d700 (LWP 3013)]
[New Thread 0x7fffd4789700 (LWP 3014)]
[Thread 0x7fffd4789700 (LWP 3014) exited]
[New Thread 0x7fffd4789700 (LWP 3015)]
state saved
[New Thread 0x7fffd7e5d700 (LWP 3017)]
[New Thread 0x7fffd865e700 (LWP 3016)]
[New Thread 0x7fffd6f52700 (LWP 3018)]
[New Thread 0x7fffd65cf700 (LWP 3019)]
[New Thread 0x7fffd503e700 (LWP 3020)]
on_frmMain_destroy
[Thread 0x7fffd865e700 (LWP 3016) exited]
[Thread 0x7fffd65cf700 (LWP 3019) exited]
[Thread 0x7fffd4789700 (LWP 3015) exited]
[Thread 0x7fffd6f52700 (LWP 3018) exited]
[Thread 0x7fffd918d700 (LWP 3013) exited]
[Thread 0x7fffd7e5d700 (LWP 3017) exited]
[Thread 0x7fffeb3a4700 (LWP 2962) exited]
[Thread 0x7fffd503e700 (LWP 3020) exited]
Program exited normally.
(gdb) quit
mbokor@
mbokor@
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
(gdb) run openshot
Starting program: openshot
No executable file specified.
Use the "file" or "exec-file" command.
(gdb) quit
mbokor@
/usr/bin
mbokor@
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
(gdb) quir
Undefined command: "quir". Try "help".
(gdb) quit
mbokor@
rDer Befehl »clea« wurde nicht gefunden, meinten Sie vielleicht:
Befehl »clear« aus dem Paket »ncurses-bin« (main)
Befehl »clex« aus dem Paket »clex« (universe)
clea: Befehl nicht gefunden
mbokor@
mbokor@
GNU gdb (GDB) 7.2-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://
Reading symbols from /usr/bin/
(gdb) run openshot
Starting program: /usr/bin/python openshot
[Thread debugging using libthread_db enabled]
-------
OpenShot (version 1.3.0)
-------
Process no longer exists: 2947. Creating new pid lock file.
[New Thread 0x7fffeb3a4700 (LWP 5175)]
[New Thread 0x7fffd918d700 (LWP 5383)]
[New Thread 0x7fffd4789700 (LWP 5384)]
[Thread 0x7fffd4789700 (LWP 5384) exited]
[New Thread 0x7fffd4789700 (LWP 5390)]
state saved
[New Thread 0x7fffd865e700 (LWP 5391)]
[New Thread 0x7fffd7e5d700 (LWP 5392)]
[New Thread 0x7fffd6f52700 (LWP 5393)]
[New Thread 0x7fffd5e45700 (LWP 5394)]
[New Thread 0x7fffd3f88700 (LWP 5397)]
[New Thread 0x7fffd1e72700 (LWP 5413)]
project modified: Opened project
state saved
[Thread 0x7fffd5e45700 (LWP 5394) exited]
[Thread 0x7fffd4789700 (LWP 5390) exited]
[Thread 0x7fffd865e700 (LWP 5391) exited]
[Thread 0x7fffd6f52700 (LWP 5393) exited]
NEW SDL CONSUMER
[Thread 0x7fffd1e72700 (LWP 5413) exited]
[New Thread 0x7fffd1e72700 (LWP 5415)]
[Thread 0x7fffd1e72700 (LWP 5415) exited]
[New Thread 0x7fffd1e72700 (LWP 5416)]
[New Thread 0x7fffd865e700 (LWP 5417)]
[New Thread 0x7fffd6f52700 (LWP 5418)]
[New Thread 0x7fffd4789700 (LWP 5419)]
/usr/lib/
canvasImageTr
on_tlbMakeMovie
[New Thread 0x7fffd1671700 (LWP 5420)]
[New Thread 0x7fffd0e70700 (LWP 5421)]
on_cboExportTyp
on_cboUploadSer
on_cboProjectTy
on_cboExportTo_
[Thread 0x7fffd1671700 (LWP 5420) exited]
[Thread 0x7fffd0e70700 (LWP 5421) exited]
on_btnExportVid
[New Thread 0x7fffd0e70700 (LWP 5422)]
[Thread 0x7fffd4789700 (LWP 5419) exited]
[Thread 0x7fffd1e72700 (LWP 5416) exited]
[Thread 0x7fffd6f52700 (LWP 5418) exited]
[Thread 0x7fffd865e700 (LWP 5417) exited]
[Thread 0x7fffd0e70700 (LWP 5422) exited]
NEW SDL CONSUMER
[New Thread 0x7fffd0e70700 (LWP 5423)]
[New Thread 0x7fffd6f52700 (LWP 5424)]
[New Thread 0x7fffd1e72700 (LWP 5425)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffd6f52700 (LWP 5424)]
0x00007fffdf2167ea in ?? () from /usr/lib/
(gdb)
Can you see anything concerning the problem ?
Greetings Michi.
Revision history for this message
|
#11 |
It seems to be an error of MLT.
What is your version of MLT ? You should update at the last version (i.e. 0.70). It can resolve your problem (but that not sure, to try). You have the link in the dependencies post.
If it is always present you should inform the MLT Team on Sourceforge and open a new bug (or see if this problem is not already explained and solved).
Good luck.
Can you help with this problem?
Provide an answer of your own, or ask Michi for more information if necessary.