Cannot pass events to pythia
The question is similar to the one in 2015. https:/
Let's say, I'm running a test run for
generate p p > u u~
Using all the default settings in the card files. Generate events then use Pythia for the showering.
However, that is due to the version incompatibility. In my case, I'm using pythia8306, and MG5 v_3_3_2, which is not expected to have this incompatibility.
If I install pythia8 within MG5 via `install pythia8`, then it works. The pythia version is also 8306.
Any idea on this?
System: MacOS Monterey 12.4
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Olivier Mattelaer
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Did you install the mg5amcpythia interface?
Having only pythia8 is not enough
Olivier
> On 2 Jun 2022, at 20:35, Isaac Wang <email address hidden> wrote:
>
> New question #702050 on MadGraph5_aMC@NLO:
> https:/
>
> The question is similar to the one in 2015. https:/
>
> Let's say, I'm running a test run for
> generate p p > u u~
>
> Using all the default settings in the card files. Generate events then use Pythia for the showering.
>
> However, that is due to the version incompatibility. In my case, I'm using pythia8306, and MG5 v_3_3_2, which is not expected to have this incompatibility.
>
> If I install pythia8 within MG5 via `install pythia8`, then it works. The pythia version is also 8306.
>
> Any idea on this?
>
> System: MacOS Monterey 12.4
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
|
Revision history for this message
|
#2 |
Yes of course I have installed that interface after run 'set pythia8_path /path/to/
And I have
export DYLD_LIBRARY_
|
Revision history for this message
|
#3 |
And do you have any information about the issue? (a warning? error message?)
|
Revision history for this message
|
#4 |
There is a file "run_01_
#******
#* MadGraph5_
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 3.3.2 2022-03-18 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadEvent *
#* *
#* run as ./bin/madevent.py filename *
#* *
#******
generate_events run_01
Traceback (most recent call last):
File "/Users/
return self.onecmd_
File "/Users/
return func(arg, **opt)
File "/Users/
self.
File "/Users/
original_
File "/Users/
self.
File "/Users/
stop = Cmd.onecmd_
File "/Users/
return func(arg, **opt)
File "/Users/
self.
File "/Users/
stop = Cmd.onecmd_
File "/Users/
return func(arg, **opt)
File "/Users/
self.
File "/Users/
raise Exception(
Exception: program /Users/
automatic_
cluster_
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 3.3.2 2022-03-18 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#******
set group_subprocesses Auto
set ignore_
set low_mem_
set complex_mass_scheme False
set include_
set gauge unitary
set loop_optimized_
set loop_color_flows False
set max_npoint_
set default_
set max_t_for_channel 99
set zerowidth_tchannel True
set nlo_mixed_expansion True
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
generate p p > u u~
output ~/Work/test_ppqq
#######
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
#######
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
#######
#######
## INFORMATION FOR MASS
#######
Block mass
5 4.700000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000e+00 # d : 0.0
2 0.000000e+00 # u : 0.0
3 0.000000e+00 # s : 0.0
4 0.000000e+00 # c : 0.0
11 0.000000e+00 # e- : 0.0
12 0.000000e+00 # ve : 0.0
13 0.000000e+00 # mu- : 0.0
14 0.000000e+00 # vm : 0.0
16 0.000000e+00 # vt : 0.0
21 0.000000e+00 # g : 0.0
22 0.000000e+00 # a : 0.0
24 8.041900e+01 # w+ : cmath.sqrt(
#######
## INFORMATION FOR SMINPUTS
#######
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set)
#######
## INFORMATION FOR YUKAWA
#######
Block yukawa
5 4.700000e+00 # ymb
6 1.730000e+02 # ymt
15 1.777000e+00 # ymtau
#######
## INFORMATION FOR DECAY
#######
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000e+00 # d : 0.0
DECAY 2 0.000000e+00 # u : 0.0
DECAY 3 0.000000e+00 # s : 0.0
DECAY 4 0.000000e+00 # c : 0.0
DECAY 5 0.000000e+00 # b : 0.0
DECAY 11 0.000000e+00 # e- : 0.0
DECAY 12 0.000000e+00 # ve : 0.0
DECAY 13 0.000000e+00 # mu- : 0.0
DECAY 14 0.000000e+00 # vm : 0.0
DECAY 15 0.000000e+00 # ta- : 0.0
DECAY 16 0.000000e+00 # vt : 0.0
DECAY 21 0.000000e+00 # g : 0.0
DECAY 22 0.000000e+00 # a : 0.0
#******
# MadGraph5_aMC@NLO *
# *
# run_card.dat MadEvent *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/
# *
# Lines starting with a '# ' are info or comments *
# *
# mind the format: value = variable ! comment *
# *
# To display more options, you can type the command: *
# update to_full *
#******
#
#******
# Tag name for the run (one word) *
#******
tag_1 = run_tag ! name of the run
#******
# Number of events and rnd seed *
# Warning: Do not generate more than 1M events in a single run *
#******
10000 = nevents ! Number of unweighted events requested
0 = iseed ! rnd seed (0=assigned automatically=
#******
# Collider type and energy *
# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=elastic photon of proton,*
# +/-3=PDF of electron/positron beam *
# +/-4=PDF of muon/antimuon beam *
#******
1 = lpp1 ! beam 1 type
1 = lpp2 ! beam 2 type
6500.0 = ebeam1 ! beam 1 total energy in GeV
6500.0 = ebeam2 ! beam 2 total energy in GeV
# To see polarised beam options: type "update beam_pol"
#******
# PDF CHOICE: this automatically fixes alpha_s and its evol. *
# pdlabel: lhapdf=LHAPDF (installation needed) [1412.7420] *
# iww=Improved Weizsaecker-
# eva=Effective W/Z/A Approx. [21yy.zzzzz] *
# none=No PDF, same as lhapdf with lppx=0 *
#******
nn23lo1 = pdlabel ! PDF set
230000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
# To see heavy ion options: type "update ion_pdf"
#******
# Renormalization and factorization scales *
#******
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
91.188 = scale ! fixed ren scale
91.188 = dsqrt_q2fact1 ! fixed fact scale for pdf1
91.188 = dsqrt_q2fact2 ! fixed fact scale for pdf2
-1 = dynamical_
1.0 = scalefact ! scale factor for event-by-event scales
#******
# Type and output format
#******
False = gridpack !True = setting up the grid pack
-1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
average = event_norm ! average/sum. Normalization of the weight in the LHEF
# To see MLM/CKKW merging options: type "update MLM" or "update CKKW"
#******
#
#******
# Phase-Space Optimization strategy (basic options)
#******
0 = nhel ! using helicities importance sampling or not.
2 = sde_strategy ! default integration strategy (hep-ph/2021.00773)
! 2 is new strategy (using only the denominator)
# To see advanced option for Phase-Space optimization: type "update psoptim"
#******
# Generation bias, check the wiki page below for more information: *
# 'cp3.irmp.
#******
None = bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
{} = bias_parameters ! Specifies the parameters of the module.
#
#******
# Parton level cuts definition *
#******
0.0 = dsqrt_shat ! minimal shat for full process
#
#
#******
# BW cutoff (M+/-bwcutoff*
#******
15.0 = bwcutoff ! (M+/-bwcutoff*
#******
# Standard Cuts *
#******
# Minimum and maximum pt's (for max, -1 means no cut) *
#******
0.0 = ptj ! minimum pt for the jets
-1.0 = ptjmax ! maximum pt for the jets
{} = pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
{} = pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50})
#
# For display option for energy cut in the partonic center of mass frame type 'update ecut'
#
#******
# Maximum and minimum absolute rapidity (for max, -1 means no cut) *
#******
-1.0 = etaj ! max rap for the jets
{} = eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
{} = eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
#******
# Minimum and maximum DeltaR distance *
#******
0.0 = drjj ! min distance between jets
-1.0 = drjjmax ! max distance between jets
#******
# Minimum and maximum invariant mass for pairs *
#******
0.0 = mmjj ! min invariant mass of a jet pair
-1.0 = mmjjmax ! max invariant mass of a jet pair
{} = mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
{'default': False} = mxx_only_
#******
# Inclusive cuts *
#******
0.0 = xptj ! minimum pt for at least one jet
#*****
# Control the pt's of the jets sorted by pt *
#*****
0.0 = ptj1min ! minimum pt for the leading jet in pt
0.0 = ptj2min ! minimum pt for the second jet in pt
-1.0 = ptj1max ! maximum pt for the leading jet in pt
-1.0 = ptj2max ! maximum pt for the second jet in pt
0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
#*****
# Control the Ht(k)=Sum of k leading jets *
#*****
0.0 = htjmin ! minimum jet HT=Sum(jet pt)
-1.0 = htjmax ! maximum jet HT=Sum(jet pt)
0.0 = ihtmin !inclusive Ht for all partons (including b)
-1.0 = ihtmax !inclusive Ht for all partons (including b)
#*****
# WBF cuts *
#*****
0.0 = xetamin ! minimum rapidity for two jets in the WBF case
0.0 = deltaeta ! minimum rapidity for two jets in the WBF case
#******
# maximal pdg code for quark to be considered as a light jet *
# (otherwise b cuts are applied) *
#******
4 = maxjetflavor ! Maximum jet pdg code
#******
#
#******
# Store info for systematics studies *
# WARNING: Do not use for interference type of computation *
#******
True = use_syst ! Enable systematics studies
#
systematics = systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset'] = systematics_
There is also some log files in each pythia split. They says:
dyld[55473]: Symbol not found: __ZN7Pythia812g
Referenced from: /Users/
Expected in: /Users/
Banner file:
<LesHouchesEvents version="3.0">
<header>
<!--
#******
# *
# MadGraph5_aMC@NLO *
# *
# Going Beyond *
# *
# http://
# http://
# http://
# *
# The MadGraph5_aMC@NLO team *
# *
#......
# *
# This file contains all the information necessary to reproduce *
# the events generated: *
# *
# 1. software version *
# 2. proc_card : code generation info including model *
# 3. param_card : model primary parameters in the LH format *
# 4. run_card : running parameters (collider and cuts) *
# 5. pythia_card : present only if pythia has been run *
# 6. pgs_card : present only if pgs has been run *
# 7. delphes_cards : present only if delphes has been run *
# *
# *
#******
-->
<MGVersion>
3.3.2
</MGVersion>
<MG5ProcCard>
<![CDATA[
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 3.3.2 2022-03-18 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#******
set group_subprocesses Auto
set ignore_
set low_mem_
set complex_mass_scheme False
set include_
set gauge unitary
set loop_optimized_
set loop_color_flows False
set max_npoint_
set default_
set max_t_for_channel 99
set zerowidth_tchannel True
set nlo_mixed_expansion True
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
generate p p > u u~
output ~/Work/test_ppqq
]]>
</MG5ProcCard>
<MGProcCard>
#******
# MadGraph/MadEvent *
# http://
# *
# proc_card.dat *
#******
# *
# This Files is generated by MADGRAPH 5 *
# *
# WARNING: This Files is generated for MADEVENT (compatibility issue)*
# This files is NOT a valid MG4 proc_card.dat *
# Running this in MG4 will NEVER reproduce the result of MG5*
# *
#******
#******
# Process(es) requested : mg2 input *
#******
# Begin PROCESS # This is TAG. Do not modify this line
p p > u u~ #Process
# Be carefull the coupling are here in MG5 convention
end_coup # End the couplings input
done # this tells MG there are no more procs
# End PROCESS # This is TAG. Do not modify this line
#******
# Model information *
#******
# Begin MODEL # This is TAG. Do not modify this line
sm
# End MODEL # This is TAG. Do not modify this line
#******
# Start multiparticle definitions *
#******
# Begin MULTIPARTICLES # This is TAG. Do not modify this line
# End MULTIPARTICLES # This is TAG. Do not modify this line
</MGProcCard>
<MGRunCard>
<![CDATA[
#******
# MadGraph5_aMC@NLO *
# *
# run_card.dat MadEvent *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/
# *
# Lines starting with a '# ' are info or comments *
# *
# mind the format: value = variable ! comment *
# *
# To display more options, you can type the command: *
# update to_full *
#******
#
#******
# Tag name for the run (one word) *
#******
tag_1 = run_tag ! name of the run
#******
# Number of events and rnd seed *
# Warning: Do not generate more than 1M events in a single run *
#******
10000 = nevents ! Number of unweighted events requested
21 = iseed ! rnd seed (0=assigned automatically=
#******
# Collider type and energy *
# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=elastic photon of proton,*
# +/-3=PDF of electron/positron beam *
# +/-4=PDF of muon/antimuon beam *
#******
1 = lpp1 ! beam 1 type
1 = lpp2 ! beam 2 type
6500.0 = ebeam1 ! beam 1 total energy in GeV
6500.0 = ebeam2 ! beam 2 total energy in GeV
# To see polarised beam options: type "update beam_pol"
#******
# PDF CHOICE: this automatically fixes alpha_s and its evol. *
# pdlabel: lhapdf=LHAPDF (installation needed) [1412.7420] *
# iww=Improved Weizsaecker-
# eva=Effective W/Z/A Approx. [21yy.zzzzz] *
# none=No PDF, same as lhapdf with lppx=0 *
#******
nn23lo1 = pdlabel ! PDF set
230000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
# To see heavy ion options: type "update ion_pdf"
#******
# Renormalization and factorization scales *
#******
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
91.188 = scale ! fixed ren scale
91.188 = dsqrt_q2fact1 ! fixed fact scale for pdf1
91.188 = dsqrt_q2fact2 ! fixed fact scale for pdf2
-1 = dynamical_
1.0 = scalefact ! scale factor for event-by-event scales
#******
# Type and output format
#******
False = gridpack !True = setting up the grid pack
-1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
average = event_norm ! average/sum. Normalization of the weight in the LHEF
# To see MLM/CKKW merging options: type "update MLM" or "update CKKW"
#******
#
#******
# Phase-Space Optimization strategy (basic options)
#******
0 = nhel ! using helicities importance sampling or not.
2 = sde_strategy ! default integration strategy (hep-ph/2021.00773)
! 2 is new strategy (using only the denominator)
# To see advanced option for Phase-Space optimization: type "update psoptim"
#******
# Generation bias, check the wiki page below for more information: *
# 'cp3.irmp.
#******
None = bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
{} = bias_parameters ! Specifies the parameters of the module.
#
#******
# Parton level cuts definition *
#******
0.0 = dsqrt_shat ! minimal shat for full process
#
#
#******
# BW cutoff (M+/-bwcutoff*
#******
15.0 = bwcutoff ! (M+/-bwcutoff*
#******
# Standard Cuts *
#******
# Minimum and maximum pt's (for max, -1 means no cut) *
#******
0.0 = ptj ! minimum pt for the jets
-1.0 = ptjmax ! maximum pt for the jets
{} = pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle
{} = pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50})
#
# For display option for energy cut in the partonic center of mass frame type 'update ecut'
#
#******
# Maximum and minimum absolute rapidity (for max, -1 means no cut) *
#******
-1.0 = etaj ! max rap for the jets
{} = eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle
{} = eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5})
#******
# Minimum and maximum DeltaR distance *
#******
0.0 = drjj ! min distance between jets
-1.0 = drjjmax ! max distance between jets
#******
# Minimum and maximum invariant mass for pairs *
#******
0.0 = mmjj ! min invariant mass of a jet pair
-1.0 = mmjjmax ! max invariant mass of a jet pair
{} = mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250})
{'default': False} = mxx_only_
#******
# Inclusive cuts *
#******
0.0 = xptj ! minimum pt for at least one jet
#*****
# Control the pt's of the jets sorted by pt *
#*****
0.0 = ptj1min ! minimum pt for the leading jet in pt
0.0 = ptj2min ! minimum pt for the second jet in pt
-1.0 = ptj1max ! maximum pt for the leading jet in pt
-1.0 = ptj2max ! maximum pt for the second jet in pt
0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
#*****
# Control the Ht(k)=Sum of k leading jets *
#*****
0.0 = htjmin ! minimum jet HT=Sum(jet pt)
-1.0 = htjmax ! maximum jet HT=Sum(jet pt)
0.0 = ihtmin !inclusive Ht for all partons (including b)
-1.0 = ihtmax !inclusive Ht for all partons (including b)
#*****
# WBF cuts *
#*****
0.0 = xetamin ! minimum rapidity for two jets in the WBF case
0.0 = deltaeta ! minimum rapidity for two jets in the WBF case
#******
# maximal pdg code for quark to be considered as a light jet *
# (otherwise b cuts are applied) *
#******
4 = maxjetflavor ! Maximum jet pdg code
#******
#
#******
# Store info for systematics studies *
# WARNING: Do not use for interference type of computation *
#******
True = use_syst ! Enable systematics studies
#
systematics = systematics_program ! none, systematics [python], SysCalc [depreceted, C++]
['--mur=0.5,1,2', '--muf=0.5,1,2', '--pdf=errorset'] = systematics_
]]>
</MGRunCard>
<slha>
#######
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
#######
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
#######
#######
## INFORMATION FOR MASS
#######
Block mass
5 4.700000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000e+00 # d : 0.0
2 0.000000e+00 # u : 0.0
3 0.000000e+00 # s : 0.0
4 0.000000e+00 # c : 0.0
11 0.000000e+00 # e- : 0.0
12 0.000000e+00 # ve : 0.0
13 0.000000e+00 # mu- : 0.0
14 0.000000e+00 # vm : 0.0
16 0.000000e+00 # vt : 0.0
21 0.000000e+00 # g : 0.0
22 0.000000e+00 # a : 0.0
24 8.041900e+01 # w+ : cmath.sqrt(
#######
## INFORMATION FOR SMINPUTS
#######
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set)
#######
## INFORMATION FOR YUKAWA
#######
Block yukawa
5 4.700000e+00 # ymb
6 1.730000e+02 # ymt
15 1.777000e+00 # ymtau
#######
## INFORMATION FOR DECAY
#######
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000e+00 # d : 0.0
DECAY 2 0.000000e+00 # u : 0.0
DECAY 3 0.000000e+00 # s : 0.0
DECAY 4 0.000000e+00 # c : 0.0
DECAY 5 0.000000e+00 # b : 0.0
DECAY 11 0.000000e+00 # e- : 0.0
DECAY 12 0.000000e+00 # ve : 0.0
DECAY 13 0.000000e+00 # mu- : 0.0
DECAY 14 0.000000e+00 # vm : 0.0
DECAY 15 0.000000e+00 # ta- : 0.0
DECAY 16 0.000000e+00 # vt : 0.0
DECAY 21 0.000000e+00 # g : 0.0
DECAY 22 0.000000e+00 # a : 0.0
</slha>
<MGGenerationInfo>
# Number of Events : 10000
# Integrated weight (pb) : 5461123000.0
</MGGenerationInfo>
</header>
</LesHouchesEvents>
|
Revision history for this message
|
#5 |
Hello, Oliver,
Sorry for the mess information. Here is an organized summary of what I did and what is happening.
First, my laptop is Macbook with intel chip, MacOS Monterey 12.4, with all command line tools updated.
Second, my python is directly downloaded from Python official website, version 3.9.10. I manually create an venv for it and set that as my default python environment (activated by default for each shell session)
Then, with this python environment, download MG5 v 3.3.2 and pythia v8.306.
Compile and install pythia, pass python env to pythia during this process via ./configure. Then `export DYLD_LIBRARY_
Then, start MG5, run `set pythia8_path /path/to/
So far, no error reported.
Then, in MG5, run `generate p p > u u~`, output, launch, turn on pythia8 for showering. Keep the param_card.dat unchanged. Remove all the cuts such as etaj in run_card.dat, and keep the pythia8_card.dat unchanged.
Press enter, run this process. Then MG5 stopped after it computed the cross section and generated the .lhe file. The error is:
---------------
Exception: program /Users/
---------------
If go into any pythia8 split folder, we can find pythia8 log file. It simply says:
---------------
dyld[55473]: Symbol not found: __ZN7Pythia812g
Referenced from: /Users/
Expected in: /Users/
----------------
The debug log file and the banner file can be found above.
If I remove the DYLD_LIBRARY_PATH and install pythia8 within MG5, it runs correctly. But if I keep the DYLD_LIBRARY_PATH, same error.
I'm sorry for any misexpression.
Do you have any idea for this issue?
|
Revision history for this message
|
#6 |
Hi,
I would say that the external pythia8 version was not compiled with the zlib support that we need for mg5amc file.
(but which is technically optional when you install pythia8 by hand)
Cheers,
Olivier
> On 3 Jun 2022, at 19:41, Isaac Wang <email address hidden> wrote:
>
> Question #702050 on MadGraph5_aMC@NLO changed:
> https:/
>
> Isaac Wang gave more information on the question:
> Hello, Oliver,
>
> Sorry for the mess information. Here is an organized summary of what I
> did and what is happening.
>
> First, my laptop is Macbook with intel chip, MacOS Monterey 12.4, with all command line tools updated.
> Second, my python is directly downloaded from Python official website, version 3.9.10. I manually create an venv for it and set that as my default python environment (activated by default for each shell session)
>
> Then, with this python environment, download MG5 v 3.3.2 and pythia
> v8.306.
>
> Compile and install pythia, pass python env to pythia during this
> process via ./configure. Then `export
> DYLD_LIBRARY_
>
> Then, start MG5, run `set pythia8_path /path/to/
> So far, no error reported.
>
> Then, in MG5, run `generate p p > u u~`, output, launch, turn on pythia8
> for showering. Keep the param_card.dat unchanged. Remove all the cuts
> such as etaj in run_card.dat, and keep the pythia8_card.dat unchanged.
>
> Press enter, run this process. Then MG5 stopped after it computed the
> cross section and generated the .lhe file. The error is:
>
> ---------------
> Exception: program /Users/
> ---------------
>
> If go into any pythia8 split folder, we can find pythia8 log file. It
> simply says:
>
> ---------------
> dyld[55473]: Symbol not found: __ZN7Pythia812g
> Referenced from: /Users/
> Expected in: /Users/
> ----------------
>
>
> The debug log file and the banner file can be found above.
>
> If I remove the DYLD_LIBRARY_PATH and install pythia8 within MG5, it
> runs correctly. But if I keep the DYLD_LIBRARY_PATH, same error.
>
> I'm sorry for any misexpression.
>
> Do you have any idea for this issue?
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
|
Revision history for this message
|
#7 |
Thanks Olivier Mattelaer, that solved my question.
|
Revision history for this message
|
#8 |
Thanks, add `--with-
