HP PhotoSmart b109 support

Hi HPLIP people !

I have a HP PhotoSmart B109a printer and I'm running Linux Ubuntu 9.10.
HPLIP doesn't seem to support this printer : it is not listed in the web site, and the hp-setup utility doesn't see it.

Nevertheless, if I install it through the CUPS web interface and if I choose another driver, such as the one for the HP PhotoSmart C4400 series, then printing seems to work. The test page is mostly ok, except the bottom of it which looks out of the margin.

But for the scanning feature, it doesn't work at all (sane detects it, but doesn't supports it, as far as I understood).

Is there any support planned in HPLIP for this B109a printer ? Or are there any tips that I can use to improve the way it works on my system ?

Below is the output for the "hp-check -t" command.

Thanks in advance for your reply.

Regards

Patrick Olinet

$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine
if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built
HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux cinnamon 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 GNU/Linux

Distribution:
ubuntu 9.04

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: l?ordonnanceur tourne
error: Version: (Not available. CUPS may not be installed or not running.)

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libdbus-1-dev

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libjpeg62-dev

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libtool

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python2.5-dev

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = usb://HP/Photosmart%20B109a-m?serial=MY97K4215605C7

[installation]
date_time = 09/19/09 18:18:43
version = 3.9.2.49

-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

warning: No queues found.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname UVC Camera (046d:0990) virtual device

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x7a11 at 001:005:
    Device URI: hp:/usb/Photosmart_B109a-m?serial=MY97K4215605C7
    Device node: /dev/bus/usb/001/005
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/005
# owner: root
# group: lp
user::rw-
user:pat:rw-
group::rw-
mask::rw-
other::r--

-----------
| SUMMARY |
-----------

error: 9 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd
sudo aptitude install --assume-yes libdbus-1-dev
sudo aptitude install --assume-yes libjpeg62-dev
sudo aptitude install --assume-yes libsnmp-dev
sudo aptitude install --assume-yes libtool
sudo aptitude install --assume-yes libusb-dev
sudo aptitude install --assume-yes python2.5-dev
sudo aptitude install --assume-yes libsane-dev

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.