smart tank 581 demora aproximadamente 6 segundos para puxar e imprimir próxima página
Ubuntu 22.04
HP Smart Tank 581
Driver: Atual - HP Smart Tank 580-590 Series, hpcups 3.23.12
Output hp-check -t
gomide@
/usr/bin/
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/gomide/
HP Linux Imaging and Printing System (ver. 3.23.12)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built
HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 6.5.0-28-generic #29~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Apr 4 14:39:20 UTC 2 GNU/Linux
Host: gomide-desktop
Proc: 6.5.0-28-generic #29~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Apr 4 14:39:20 UTC 2 GNU/Linux
Distribution: 12 22.04
Bitness: 64 bit
-------
| HPLIP CONFIGURATION |
-------
HPLIP-Version: HPLIP 3.23.12
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 22.04 version
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.23.12
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
html=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
bin=/usr/bin
apparmor=
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/
[plugin]
installed = 1
eula = 1
version = 3.23.12
Current contents of '~/.hplip/
[upgrade]
notify_upgrade = true
last_upgraded_time = 1711188772
pending_
latest_
[installation]
date_time = 04/30/24 05:39:48
version = 3.23.12
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------
| External Dependencies |
-------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.55.0 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.1.1 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21.2 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
-------
| General Dependencies |
-------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.4.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.36' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.1 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.0.2 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.10.12 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.15.6 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.15.6 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.18 OK -
python3-xml Python XML libraries REQUIRED - 2.4.7 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.10.12 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 10.2.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.8 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 11.4.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
-------
| Python Extentions |
-------
cupsext CUPS-Extension REQUIRED - 3.23.12 OK -
hpmudext IO-Extension REQUIRED - 3.23.12 OK -
-------
| Scan Configuration |
-------
hpaio HPLIP-SANE-Backend REQUIRED - 3.23.12 OK 'hpaio found in /etc/sane.
scanext Scan-SANE-Extension REQUIRED - 3.23.12 OK -
-------
| DISCOVERED SCANNER DEVICES |
-------
device `hpaio:
device `escl:https:/
device `airscan:w2:Canon G3010 series' is a WSD Canon G3010 series ip=192.168.0.183
device `airscan:e0:HP Smart Tank 580-590 series [E2A044]' is a eSCL HP Smart Tank 580-590 series [E2A044] ip=192.168.0.134
device `hpaio:
device `escl:https:/
device `airscan:w2:Canon G3010 series' is a WSD Canon G3010 series ip=192.168.0.183
device `airscan:e0:HP Smart Tank 580-590 series [E2A044]' is a eSCL HP Smart Tank 580-590 series [E2A044] ip=192.168.0.134
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Canon_G3010_series
------------------
Type: Unknown
Device URI: dnssd:/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer status: impressora Canon_G3010_series está inativa; habilitada desde seg 29 abr 2024 11:44:04
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Canon_G3010_
-------
Type: Unknown
Device URI: dnssd:/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer status: impressora Canon_G3010_
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Epson_Stylus_
-------
Type: Unknown
Device URI: usb://EPSON/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer Unplugged or turned offn_Stylus_
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Epson_Stylus_
-------
Type: Unknown
Device URI: usb://EPSON/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer Unplugged or turned offn_Stylus_
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP_Smart_
-------
Type: Unknown
Device URI: dnssd:/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer status: impressora HP_Smart_
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Smart_Tank_580-590
------------------
Type: Printer
Device URI: hp:/net/
PPD: /etc/cups/
warning: Failed to read /etc/cups/
PPD Description:
Printer status: impressora Smart_Tank_580-590 está inativa; habilitada desde seg 29 abr 2024 11:43:49
Communication status: Good
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-------
None
Missing Optional Dependencies
-------
None
Total Errors: 0
Total Warnings: 5
Done.
Problema: ao imprimir qualquer documento com mais de 2 paginas ao acabar de imprimir uma página ela demora aproximadamente 6 segundos para puxar a próxima página a ser impressa, e assim por diante página após página. Como tenho dual boot quando imprimo o mesmo documento no windows 10 ele puxa a página imediatamente após a anterior ter sido impressa.
No mesmo ubuntu 22.04 ao imprimir o mesmo documento em outra impressora seja a Canon G3010 ou a Epson T25, a próxima página é puxada imediatamente.
Aguardo alguma solução
Question information
- Language:
- Macedonian Edit question
- Status:
- Expired
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply: