HPLIP

no locking of paper sizes per tray

Asked by sgtaylor5

On Windows XP, using the PCL 6 drivers and printing to an HP Laserjet 2200, with duplex, 72 MB RAM and Tray 3 options installed and set, there is an option to lock each paper tray to a particular size of paper. The described problem occurs whether connected by USB 2.0 or 100tx Network.

In Linux using hplip 3.9.2, there is no such option.

Why this matters to me:
I'm trying to print to Tray 2 double-sided (short side) 40 copies each week. I can lock Tray 2 for Legal paper in Windows and everything prints fine and the job starts instantly.

In Linux I get an troubleshooting error that the printer paper size is "Letter", and the print job is "Legal". I get a "Recoverable Error" indication 100% of the time in Linux, and not at all in Windows. I cannot find any combination of printer driver settings that will allow me to print this job except one page at a time in Linux.

Ouch! I've tried reformatting my Linux install and re-installing many times to no avail. The first time I set up this printer with Linux, it printed this job beautifully, but when I printed with Windows, it hasn't printed this job (and this print job alone) correctly since.

All other print jobs print beautifully in Linux. I thought I knew computers, but this problem has me quite stumped.

Steve Taylor

Question information

Language:
English Edit question
Status:
Answered
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said : 		#1

Please run hp-check -t and post the output.

What application are you printing from?

Also for setting a specific paper size to a specific tray you can make more than one printer queue and set the parameters you require. For example you can create another queue, name is HP_Legal (or something) then in cups or hp-toolbox set the print settings. then create another one called HP_Letter, etc. then when you can to print legal you can select the legal queue and so forth.

Aaron

Revision history for this message
sgtaylor5 (10000saints) said : 		#2

Aaron Albright wrote:
> Your question #79424 on HPLIP changed:
> https://answers.launchpad.net/hplip/+question/79424
>
> Status: Open => Needs information
>
> Aaron Albright requested for more information:
> Please run hp-check -t and post the output.
>
> What application are you printing from?
>
> Also for setting a specific paper size to a specific tray you can make
> more than one printer queue and set the parameters you require. For
> example you can create another queue, name is HP_Legal (or something)
> then in cups or hp-toolbox set the print settings. then create another
> one called HP_Letter, etc. then when you can to print legal you can
> select the legal queue and so forth.
>
> Aaron
>
>
 Aaron,

Thanks for writing me back.

I'm printing from openoffice 3.1.0 writer; I will try the queue idea
next. hp-check -t output follows:

steve@portableOne ~ $ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies
are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
tarball
has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode
will check both of the above cases (both compile- and run-time
dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
 ---------------

Basic system information:
Linux portableOne 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59
UTC 2009 i686 GNU/Linux

Distribution:
linuxmint 7

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
 ------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with
the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the
-r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System
development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: GhostScript - PostScript and PDF language
interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library
development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of
programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for
commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4- Qt interface for Python (for Qt version
4.x)...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for
Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming
language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
 ----------------------

Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_2200?serial=00USBGG07217

[installation]
version = 3.9.2.49
date_time = 08/08/09 19:39:26

-------------------------------
| DISCOVERED PARALLEL DEVICES |
 -------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
 --------------------------

  Device URI Model
  -------------------------------- --------------------------
  hp:/usb/Photosmart_C4200_series? HP Photosmart C4200 series
  serial=CN7B1RF30504VP
  hp:/usb/HP_LaserJet_2200?serial= HP LaserJet 2200
  00USBGG07217

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
 ---------------------------------

HP-LaserJet-2200
----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/HP_LaserJet_2200?serial=00USBGG07217
PPD: /etc/cups/ppd/HP-LaserJet-2200.ppd
PPD Description: HP LaserJet 2200 Postscript (recommended)
Printer status: printer HP-LaserJet-2200 is idle. enabled since Sat 08
Aug 2009 05:49:40 PM PDT
Communication status: Good

Photosmart-C4200-series
-----------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP
PPD: /etc/cups/ppd/Photosmart-C4200-series.ppd
PPD Description: HP Photosmart c4200 Series hpijs, 3.9.2
Printer status: printer Photosmart-C4200-series is idle. enabled since
Sat 08 Aug 2009 05:49:40 PM PDT
Communication status: Good

Print_to_PDF
------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/

----------------------
| SANE CONFIGURATION |
 ----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP' is a
Hewlett-Packard Photosmart_C4200_series all-in-one

---------------------
| PYTHON EXTENSIONS |
 ---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
 -----------------

Checking for permissions of USB attached printers...

HP Device 0x5c11 at 001:005:
    Device URI: hp:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP
    Device node: /dev/bus/usb/001/005
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/005
# owner: root
# group: lp
user::rw-
user:steve:rw-
group::rw-
mask::rw-
other::r--

HP Device 0x217 at 001:004:
    Device URI: hp:/usb/HP_LaserJet_2200?serial=00USBGG07217
    Device node: /dev/bus/usb/001/004
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/004
# owner: root
# group: lp
user::rw-
user:steve:rw-
group::rw-
mask::rw-
other::r--

-----------
| SUMMARY |
 -----------

error: 11 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

Revision history for this message
sgtaylor5 (10000saints) said : 		#3

Aaron Albright wrote:
> Your question #79424 on HPLIP changed:
> https://answers.launchpad.net/hplip/+question/79424
>
> Status: Open => Needs information
>
> Aaron Albright requested for more information:
> Please run hp-check -t and post the output.
>
> What application are you printing from?
>
> Also for setting a specific paper size to a specific tray you can make
> more than one printer queue and set the parameters you require. For
> example you can create another queue, name is HP_Legal (or something)
> then in cups or hp-toolbox set the print settings. then create another
> one called HP_Letter, etc. then when you can to print legal you can
> select the legal queue and so forth.
>
> Aaron
>
>
 Aaron,

Thanks for writing me back.

I'm printing from openoffice 3.1.0 writer; I will try the queue idea
next. hp-check -t output follows:

steve@portableOne ~ $ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies
are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
tarball
has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode
will check both of the above cases (both compile- and run-time
dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
 ---------------

Basic system information:
Linux portableOne 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59
UTC 2009 i686 GNU/Linux

Distribution:
linuxmint 7

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
 ------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with
the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the
-r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System
development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: GhostScript - PostScript and PDF language
interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library
development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that
this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of
programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for
commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4- Qt interface for Python (for Qt version
4.x)...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for
Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming
language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency.
Please make sure that this dependency is installed before installing or
running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
 ----------------------

Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_2200?serial=00USBGG07217

[installation]
version = 3.9.2.49
date_time = 08/08/09 19:39:26

-------------------------------
| DISCOVERED PARALLEL DEVICES |
 -------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
 --------------------------

  Device URI Model
  -------------------------------- --------------------------
  hp:/usb/Photosmart_C4200_series? HP Photosmart C4200 series
  serial=CN7B1RF30504VP
  hp:/usb/HP_LaserJet_2200?serial= HP LaserJet 2200
  00USBGG07217

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
 ---------------------------------

HP-LaserJet-2200
----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/HP_LaserJet_2200?serial=00USBGG07217
PPD: /etc/cups/ppd/HP-LaserJet-2200.ppd
PPD Description: HP LaserJet 2200 Postscript (recommended)
Printer status: printer HP-LaserJet-2200 is idle. enabled since Sat 08
Aug 2009 05:49:40 PM PDT
Communication status: Good

Photosmart-C4200-series
-----------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP
PPD: /etc/cups/ppd/Photosmart-C4200-series.ppd
PPD Description: HP Photosmart c4200 Series hpijs, 3.9.2
Printer status: printer Photosmart-C4200-series is idle. enabled since
Sat 08 Aug 2009 05:49:40 PM PDT
Communication status: Good

Print_to_PDF
------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/

----------------------
| SANE CONFIGURATION |
 ----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP' is a
Hewlett-Packard Photosmart_C4200_series all-in-one

---------------------
| PYTHON EXTENSIONS |
 ---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
 -----------------

Checking for permissions of USB attached printers...

HP Device 0x5c11 at 001:005:
    Device URI: hp:/usb/Photosmart_C4200_series?serial=CN7B1RF30504VP
    Device node: /dev/bus/usb/001/005
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/005
# owner: root
# group: lp
user::rw-
user:steve:rw-
group::rw-
mask::rw-
other::r--

HP Device 0x217 at 001:004:
    Device URI: hp:/usb/HP_LaserJet_2200?serial=00USBGG07217
    Device node: /dev/bus/usb/001/004
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/004
# owner: root
# group: lp
user::rw-
user:steve:rw-
group::rw-
mask::rw-
other::r--

-----------
| SUMMARY |
 -----------

error: 11 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said : 		#4

Did setting up the queue work for you?

Thanks.

Aaron

Revision history for this message
sgtaylor5 (10000saints) said : 		#5

Aaron,

I don't know how. But I did find a way - just run 10 four page jobs, and
that prints 40 copies.

Steve @--->----

On Tue, Aug 18, 2009 at 10:59, Aaron Albright <
<email address hidden>> wrote:

> Your question #79424 on HPLIP changed:
> https://answers.launchpad.net/hplip/+question/79424
>
> Status: Open => Needs information
>
> Aaron Albright requested for more information:
> Did setting up the queue work for you?
>
> Thanks.
>
> Aaron
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https://answers.launchpad.net/hplip/+question/79424
>
> You received this question notification because you are a direct
> subscriber of the question.
>

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said : 		#6

Great. Thanks for the update.

Aaron

Can you help with this problem?

Provide an answer of your own, or ask sgtaylor5 for more information if necessary.

To post a message you must log in.