scanner on network not identified

Asked by luh3417

HP Linux Imaging and Printing System (ver. 3.9.6b)
running Kubuntu Jaunty
HP colour laserjet 2840

Prints fine but sane cannot find scanner I have tried makeuri to the ip address and it did not work.
This used to work under 9.04 with HPLIP and kooka. Am I missing something, here is hp-check -t

Thankyou
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux kubuntufl 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64 GNU/Linux

Distribution:
ubuntu 9.04

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.3.9
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.6b currently installed in '/usr/local/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.6b

[dirs]
home=/usr/local/share/hplip
run=/var/run
ppd=/usr/local/share/ppd/HP
ppdbase=/usr/local/share/ppd
doc=/usr/local/share/doc/hplip-3.9.6b
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/local/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.6b.4
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.9.6b.4
date_time = 18/07/09 19:17:16

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Canon-IR-printer
----------------
Type: Unknown
Device URI: socket://192.168.2.9:9100
PPD: /etc/cups/ppd/Canon-IR-printer.ppd
PPD Description: Canon imageRunner 330s Foomatic/hpijs (recommended)
Printer status: printer Canon-IR-printer is idle. enabled since Sun 28 Jun 2009 16:33:54 EST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HP-Laserjet-2840
----------------
Type: Unknown
Device URI: socket://192.168.2.23:9100
PPD: /etc/cups/ppd/HP-Laserjet-2840.ppd
PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
Printer status: printer HP-Laserjet-2840 is idle. enabled since Sat 18 Jul 2009 16:44:51 EST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HP_Color_LaserJet_2840
----------------------
Type: Printer
Device URI: hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
PPD: /etc/cups/ppd/HP_Color_LaserJet_2840.ppd
PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
Printer status: printer HP_Color_LaserJet_2840 is idle. enabled since Sat 18 Jul 2009 18:21:16 EST
Communication status: Good

HP_Color_LaserJet_2840_fax
--------------------------
Type: Fax
Device URI: hpfax:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
PPD: /etc/cups/ppd/HP_Color_LaserJet_2840_fax.ppd
PPD Description: HP Fax hpcups
Printer status: printer HP_Color_LaserJet_2840_fax is idle. enabled since Sat 18 Jul 2009 18:21:16 EST
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

---------------
| USER GROUPS |
---------------

raena adm dialout cdrom plugdev lpadmin admin sambashare

-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

Question information

Language:
English Edit question
Status:
Solved
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Solved by:
luh3417
Solved:
Last query:
Last reply:
Revision history for this message
dwelch91 (dwelch91) said :
#1

http://hplipopensource.com/node/212
http://hplipopensource.com/node/333

On Sat, Jul 18, 2009 at 2:19 AM, luh3417 <
<email address hidden>> wrote:

> New question #77363 on HPLIP:
> https://answers.launchpad.net/hplip/+question/77363
>
> HP Linux Imaging and Printing System (ver. 3.9.6b)
> running Kubuntu Jaunty
> HP colour laserjet 2840
>
> Prints fine but sane cannot find scanner I have tried makeuri to the ip
> address and it did not work.
> This used to work under 9.04 with HPLIP and kooka. Am I missing something,
> here is hp-check -t
>
> Thankyou
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux kubuntufl 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC
> 2009 x86_64 GNU/Linux
>
> Distribution:
> ubuntu 9.04
>
> Checking Python version...
> OK, version 2.6.2 installed
>
> Checking PyQt 4.x version...
> OK, version 4.4.4 installed.
>
> Checking for CUPS...
> Status: scheduler is running
> Version: 1.3.9
> error_log is set to level: warn
>
> Checking for dbus/python-dbus...
> dbus daemon is running.
> python-dbus version: 0.83.0
>
>
> ------------------------------------
> | COMPILE AND RUNTIME DEPENDENCIES |
> ------------------------------------
>
> note: To check for compile-time only dependencies, re-run hp-check with the
> -c parameter (ie, hp-check -c).
> note: To check for run-time only dependencies, re-run hp-check with the -r
> parameter (ie, hp-check -r).
>
> Checking for dependency: CUPS - Common Unix Printing System...
> OK, found.
>
> Checking for dependency: CUPS DDK - CUPS driver development kit...
> OK, found.
>
> Checking for dependency: CUPS devel- Common Unix Printing System
> development files...
> OK, found.
>
> Checking for dependency: CUPS image - CUPS image development files...
> OK, found.
>
> Checking for dependency: DBus - Message bus system...
> OK, found.
>
> Checking for dependency: gcc - GNU Project C and C++ Compiler...
> OK, found.
>
> Checking for dependency: GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency: libcrypto - OpenSSL cryptographic library...
> OK, found.
>
> Checking for dependency: libjpeg - JPEG library...
> OK, found.
>
> Checking for dependency: libnetsnmp-devel - SNMP networking library
> development files...
> OK, found.
>
> Checking for dependency: libpthread - POSIX threads library...
> OK, found.
>
> Checking for dependency: libtool - Library building support services...
> OK, found.
>
> Checking for dependency: libusb - USB library...
> OK, found.
>
> Checking for dependency: make - GNU make utility to maintain groups of
> programs...
> OK, found.
>
> Checking for dependency: PIL - Python Imaging Library (required for
> commandline scanning with hp-scan)...
> OK, found.
>
> Checking for dependency: PolicyKit - Administrative policy framework...
> OK, found.
>
> Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
> OK, found.
>
> Checking for dependency: Python DBus - Python bindings for DBus...
> OK, found.
>
> Checking for dependency: Python devel - Python development files...
> OK, found.
>
> Checking for dependency: Python libnotify - Python bindings for the
> libnotify Desktop notifications...
> OK, found.
>
> Checking for dependency: Python XML libraries...
> OK, found.
>
> Checking for dependency: Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
> Checking for dependency: Python 2.2 or greater - Python programming
> language...
> OK, found.
>
> Checking for dependency: Reportlab - PDF library for Python...
> OK, found.
>
> Checking for dependency: SANE - Scanning library...
> OK, found.
>
> Checking for dependency: SANE - Scanning library development files...
> OK, found.
>
> Checking for dependency: scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency: xsane - Graphical scanner frontend for SANE...
> OK, found.
>
>
> ----------------------
> | HPLIP INSTALLATION |
> ----------------------
>
>
> Currently installed HPLIP version...
> HPLIP 3.9.6b currently installed in '/usr/local/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf. Generated from hplip.conf.in by configure.
>
> [hplip]
> version=3.9.6b
>
> [dirs]
> home=/usr/local/share/hplip
> run=/var/run
> ppd=/usr/local/share/ppd/HP
> ppdbase=/usr/local/share/ppd
> doc=/usr/local/share/doc/hplip-3.9.6b
> icon=/usr/share/applications
> cupsbackend=/usr/lib/cups/backend
> cupsfilter=/usr/lib/cups/filter
> drv=/usr/local/share/cups/drv/hp
>
> # Following values are determined at configure time and cannot be changed.
> [configure]
> network-build=yes
> pp-build=no
> gui-build=yes
> scanner-build=yes
> fax-build=yes
> dbus-build=yes
> cups11-build=no
> doc-build=yes
> shadow-build=no
> hpijs-install=no
> foomatic-drv-install=no
> foomatic-ppd-install=no
> foomatic-rip-hplip-install=no
> hpcups-install=yes
> cups-drv-install=yes
> cups-ppd-install=no
> internal-tag=3.9.6b.4
> restricted-build=no
> ui-toolkit=qt4
> qt3=no
> qt4=yes
> policy-kit=no
> hpijs-only-build=no
> lite-build=no
>
>
> Current contents of '/var/lib/hp/hplip.state' file:
> # hplip.state - HPLIP runtime persistent variables.
>
> [plugin]
> installed=0
> eula=0
>
>
>
> Current contents of '~/.hplip/hplip.conf' file:
> [last_used]
> printer_name =
> working_dir = .
> device_uri = "hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23"
>
> [commands]
> scan = /usr/bin/xsane -V %SANE_URI%
>
> [installation]
> version = 3.9.6b.4
> date_time = 18/07/09 19:17:16
>
> [settings]
> systray_messages = 0
> systray_visible = 0
>
> [fax]
> email_address =
> voice_phone =
>
> [refresh]
> rate = 30
> enable = false
> type = 1
>
> [polling]
> enable = false
> device_list =
> interval = 5
>
>
>
> --------------------------
> | DISCOVERED USB DEVICES |
> --------------------------
>
> No devices found.
>
> ---------------------------------
> | INSTALLED CUPS PRINTER QUEUES |
> ---------------------------------
>
>
> Canon-IR-printer
> ----------------
> Type: Unknown
> Device URI: socket://192.168.2.9:9100
> PPD: /etc/cups/ppd/Canon-IR-printer.ppd
> PPD Description: Canon imageRunner 330s Foomatic/hpijs (recommended)
> Printer status: printer Canon-IR-printer is idle. enabled since Sun 28 Jun
> 2009 16:33:54 EST
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
> HP-Laserjet-2840
> ----------------
> Type: Unknown
> Device URI: socket://192.168.2.23:9100
> PPD: /etc/cups/ppd/HP-Laserjet-2840.ppd
> PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
> Printer status: printer HP-Laserjet-2840 is idle. enabled since Sat 18 Jul
> 2009 16:44:51 EST
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
> HP_Color_LaserJet_2840
> ----------------------
> Type: Printer
> Device URI: hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
> PPD: /etc/cups/ppd/HP_Color_LaserJet_2840.ppd
> PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
> Printer status: printer HP_Color_LaserJet_2840 is idle. enabled since Sat
> 18 Jul 2009 18:21:16 EST
> Communication status: Good
>
> HP_Color_LaserJet_2840_fax
> --------------------------
> Type: Fax
> Device URI: hpfax:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
> PPD: /etc/cups/ppd/HP_Color_LaserJet_2840_fax.ppd
> PPD Description: HP Fax hpcups
> Printer status: printer HP_Color_LaserJet_2840_fax is idle. enabled since
> Sat 18 Jul 2009 18:21:16 EST
> Communication status: Good
>
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in '/etc/sane.d/dll.conf'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
> Checking 'hpmudext' I/O extension...
> OK, found.
>
> Checking 'scanext' SANE scanning extension...
> OK, found.
>
>
>
> ---------------
> | USER GROUPS |
> ---------------
>
> raena adm dialout cdrom plugdev lpadmin admin sambashare
>
>
> -----------
> | SUMMARY |
> -----------
>
> error: 2 errors and/or warnings.
>
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
>
>
> Done.
>
>
> --
> You received this question notification because you are a member of HP
> Linux Imaging and Printing, which is an answer contact for HPLIP.
>

Revision history for this message
luh3417 (raena) said :
#2

I tried http://hplipopensource.com/node/212

xsane hpaio:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
Returns no device found.

I then tried http://hplipopensource.com/node/333

When I view sudo tail -f /var/log/syslog, and try scanning and view the
syslog for errors.
I get no output at all

I ran groups
groups
raena adm dialout cdrom plugdev lpadmin admin sambashare

There is no scanner group do I need to create one?
usermod -g scanner raena
usermod: unknown group scanner

Thanks
Raena Lea-Shannon
Partner
Frankel Lawyers
  www.frankellawyers.com.au
  Suites 46-47,
  Level 4, 41-61 Marlborough Street
  Surry Hills NSW 2010
  Ph: +612 9318 2900
  Fax: +612 9318 1690

This is a confidential transmission from Frankel Lawyers
This message contains confidential information which also
may be privileged, and is intended for the addressee only.
If you are not the intended recipient of this message
please delete the message immediately and call
Frankel Lawyers on (02) 9318 2900

Liability is limited by a Scheme approved under Professional Standards

dwelch91 wrote:
> Your question #77363 on HPLIP changed:
> https://answers.launchpad.net/hplip/+question/77363
>
> Status: Open => Answered
>
> dwelch91 proposed the following answer:
> http://hplipopensource.com/node/212
> http://hplipopensource.com/node/333
>
>
> On Sat, Jul 18, 2009 at 2:19 AM, luh3417 <
> <email address hidden>> wrote:
>
>> New question #77363 on HPLIP:
>> https://answers.launchpad.net/hplip/+question/77363
>>
>> HP Linux Imaging and Printing System (ver. 3.9.6b)
>> running Kubuntu Jaunty
>> HP colour laserjet 2840
>>
>> Prints fine but sane cannot find scanner I have tried makeuri to the ip
>> address and it did not work.
>> This used to work under 9.04 with HPLIP and kooka. Am I missing something,
>> here is hp-check -t
>>
>> Thankyou
>> ---------------
>> | SYSTEM INFO |
>> ---------------
>>
>> Basic system information:
>> Linux kubuntufl 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC
>> 2009 x86_64 GNU/Linux
>>
>> Distribution:
>> ubuntu 9.04
>>
>> Checking Python version...
>> OK, version 2.6.2 installed
>>
>> Checking PyQt 4.x version...
>> OK, version 4.4.4 installed.
>>
>> Checking for CUPS...
>> Status: scheduler is running
>> Version: 1.3.9
>> error_log is set to level: warn
>>
>> Checking for dbus/python-dbus...
>> dbus daemon is running.
>> python-dbus version: 0.83.0
>>
>>
>> ------------------------------------
>> | COMPILE AND RUNTIME DEPENDENCIES |
>> ------------------------------------
>>
>> note: To check for compile-time only dependencies, re-run hp-check with the
>> -c parameter (ie, hp-check -c).
>> note: To check for run-time only dependencies, re-run hp-check with the -r
>> parameter (ie, hp-check -r).
>>
>> Checking for dependency: CUPS - Common Unix Printing System...
>> OK, found.
>>
>> Checking for dependency: CUPS DDK - CUPS driver development kit...
>> OK, found.
>>
>> Checking for dependency: CUPS devel- Common Unix Printing System
>> development files...
>> OK, found.
>>
>> Checking for dependency: CUPS image - CUPS image development files...
>> OK, found.
>>
>> Checking for dependency: DBus - Message bus system...
>> OK, found.
>>
>> Checking for dependency: gcc - GNU Project C and C++ Compiler...
>> OK, found.
>>
>> Checking for dependency: GhostScript - PostScript and PDF language
>> interpreter and previewer...
>> OK, found.
>>
>> Checking for dependency: libcrypto - OpenSSL cryptographic library...
>> OK, found.
>>
>> Checking for dependency: libjpeg - JPEG library...
>> OK, found.
>>
>> Checking for dependency: libnetsnmp-devel - SNMP networking library
>> development files...
>> OK, found.
>>
>> Checking for dependency: libpthread - POSIX threads library...
>> OK, found.
>>
>> Checking for dependency: libtool - Library building support services...
>> OK, found.
>>
>> Checking for dependency: libusb - USB library...
>> OK, found.
>>
>> Checking for dependency: make - GNU make utility to maintain groups of
>> programs...
>> OK, found.
>>
>> Checking for dependency: PIL - Python Imaging Library (required for
>> commandline scanning with hp-scan)...
>> OK, found.
>>
>> Checking for dependency: PolicyKit - Administrative policy framework...
>> OK, found.
>>
>> Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
>> OK, found.
>>
>> Checking for dependency: Python DBus - Python bindings for DBus...
>> OK, found.
>>
>> Checking for dependency: Python devel - Python development files...
>> OK, found.
>>
>> Checking for dependency: Python libnotify - Python bindings for the
>> libnotify Desktop notifications...
>> OK, found.
>>
>> Checking for dependency: Python XML libraries...
>> OK, found.
>>
>> Checking for dependency: Python 2.3 or greater - Required for fax
>> functionality...
>> OK, found.
>>
>> Checking for dependency: Python 2.2 or greater - Python programming
>> language...
>> OK, found.
>>
>> Checking for dependency: Reportlab - PDF library for Python...
>> OK, found.
>>
>> Checking for dependency: SANE - Scanning library...
>> OK, found.
>>
>> Checking for dependency: SANE - Scanning library development files...
>> OK, found.
>>
>> Checking for dependency: scanimage - Shell scanning program...
>> OK, found.
>>
>> Checking for dependency: xsane - Graphical scanner frontend for SANE...
>> OK, found.
>>
>>
>> ----------------------
>> | HPLIP INSTALLATION |
>> ----------------------
>>
>>
>> Currently installed HPLIP version...
>> HPLIP 3.9.6b currently installed in '/usr/local/share/hplip'.
>>
>> Current contents of '/etc/hp/hplip.conf' file:
>> # hplip.conf. Generated from hplip.conf.in by configure.
>>
>> [hplip]
>> version=3.9.6b
>>
>> [dirs]
>> home=/usr/local/share/hplip
>> run=/var/run
>> ppd=/usr/local/share/ppd/HP
>> ppdbase=/usr/local/share/ppd
>> doc=/usr/local/share/doc/hplip-3.9.6b
>> icon=/usr/share/applications
>> cupsbackend=/usr/lib/cups/backend
>> cupsfilter=/usr/lib/cups/filter
>> drv=/usr/local/share/cups/drv/hp
>>
>> # Following values are determined at configure time and cannot be changed.
>> [configure]
>> network-build=yes
>> pp-build=no
>> gui-build=yes
>> scanner-build=yes
>> fax-build=yes
>> dbus-build=yes
>> cups11-build=no
>> doc-build=yes
>> shadow-build=no
>> hpijs-install=no
>> foomatic-drv-install=no
>> foomatic-ppd-install=no
>> foomatic-rip-hplip-install=no
>> hpcups-install=yes
>> cups-drv-install=yes
>> cups-ppd-install=no
>> internal-tag=3.9.6b.4
>> restricted-build=no
>> ui-toolkit=qt4
>> qt3=no
>> qt4=yes
>> policy-kit=no
>> hpijs-only-build=no
>> lite-build=no
>>
>>
>> Current contents of '/var/lib/hp/hplip.state' file:
>> # hplip.state - HPLIP runtime persistent variables.
>>
>> [plugin]
>> installed=0
>> eula=0
>>
>>
>>
>> Current contents of '~/.hplip/hplip.conf' file:
>> [last_used]
>> printer_name =
>> working_dir = .
>> device_uri = "hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23"
>>
>> [commands]
>> scan = /usr/bin/xsane -V %SANE_URI%
>>
>> [installation]
>> version = 3.9.6b.4
>> date_time = 18/07/09 19:17:16
>>
>> [settings]
>> systray_messages = 0
>> systray_visible = 0
>>
>> [fax]
>> email_address =
>> voice_phone =
>>
>> [refresh]
>> rate = 30
>> enable = false
>> type = 1
>>
>> [polling]
>> enable = false
>> device_list =
>> interval = 5
>>
>>
>>
>> --------------------------
>> | DISCOVERED USB DEVICES |
>> --------------------------
>>
>> No devices found.
>>
>> ---------------------------------
>> | INSTALLED CUPS PRINTER QUEUES |
>> ---------------------------------
>>
>>
>> Canon-IR-printer
>> ----------------
>> Type: Unknown
>> Device URI: socket://192.168.2.9:9100
>> PPD: /etc/cups/ppd/Canon-IR-printer.ppd
>> PPD Description: Canon imageRunner 330s Foomatic/hpijs (recommended)
>> Printer status: printer Canon-IR-printer is idle. enabled since Sun 28 Jun
>> 2009 16:33:54 EST
>> warning: Printer is not HPLIP installed. Printers must use the hp: or
>> hpfax: CUPS backend to function in HPLIP.
>>
>> HP-Laserjet-2840
>> ----------------
>> Type: Unknown
>> Device URI: socket://192.168.2.23:9100
>> PPD: /etc/cups/ppd/HP-Laserjet-2840.ppd
>> PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
>> Printer status: printer HP-Laserjet-2840 is idle. enabled since Sat 18 Jul
>> 2009 16:44:51 EST
>> warning: Printer is not HPLIP installed. Printers must use the hp: or
>> hpfax: CUPS backend to function in HPLIP.
>>
>> HP_Color_LaserJet_2840
>> ----------------------
>> Type: Printer
>> Device URI: hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
>> PPD: /etc/cups/ppd/HP_Color_LaserJet_2840.ppd
>> PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
>> Printer status: printer HP_Color_LaserJet_2840 is idle. enabled since Sat
>> 18 Jul 2009 18:21:16 EST
>> Communication status: Good
>>
>> HP_Color_LaserJet_2840_fax
>> --------------------------
>> Type: Fax
>> Device URI: hpfax:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
>> PPD: /etc/cups/ppd/HP_Color_LaserJet_2840_fax.ppd
>> PPD Description: HP Fax hpcups
>> Printer status: printer HP_Color_LaserJet_2840_fax is idle. enabled since
>> Sat 18 Jul 2009 18:21:16 EST
>> Communication status: Good
>>
>>
>> ----------------------
>> | SANE CONFIGURATION |
>> ----------------------
>>
>> 'hpaio' in '/etc/sane.d/dll.conf'...
>> OK, found. SANE backend 'hpaio' is properly set up.
>>
>> Checking output of 'scanimage -L'...
>>
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>>
>>
>> ---------------------
>> | PYTHON EXTENSIONS |
>> ---------------------
>>
>> Checking 'cupsext' CUPS extension...
>> OK, found.
>>
>> Checking 'pcardext' Photocard extension...
>> OK, found.
>>
>> Checking 'hpmudext' I/O extension...
>> OK, found.
>>
>> Checking 'scanext' SANE scanning extension...
>> OK, found.
>>
>>
>>
>> ---------------
>> | USER GROUPS |
>> ---------------
>>
>> raena adm dialout cdrom plugdev lpadmin admin sambashare
>>
>>
>> -----------
>> | SUMMARY |
>> -----------
>>
>> error: 2 errors and/or warnings.
>>
>> Please refer to the installation instructions at:
>> http://hplip.sourceforge.net/install/index.html
>>
>>
>> Done.
>>
>>
>> --
>> You received this question notification because you are a member of HP
>> Linux Imaging and Printing, which is an answer contact for HPLIP.
>>
>

Revision history for this message
luh3417 (raena) said :
#3

I tried http://hplipopensource.com/node/212

xsane hpaio:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
Returns no device found.

I then tried http://hplipopensource.com/node/333

When I view sudo tail -f /var/log/syslog, and try scanning and view the
syslog for errors.
I get no output at all

I ran groups
groups
raena adm dialout cdrom plugdev lpadmin admin sambashare

There is no scanner group do I need to create one?
usermod -g scanner raena
usermod: unknown group scanner

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said :
#4

We've tested on a LJ 2840 with HPLIP 3.9.6b and haven't had any problems with scanning over the network. Is it possible to test on a windows system to be sure the printer is working correctly?

Thanks.

Aaron

Revision history for this message
luh3417 (raena) said :
#5

It is running on our office network and all the other computers are windows are it works fine for them.

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said :
#6

If you connect the printer with USB does it scan correctly?

Aaron

Revision history for this message
luh3417 (raena) said :
#7

I will have to move my computer to try that. Will try it over the weekend.

Revision history for this message
Launchpad Janitor (janitor) said :
#8

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
luh3417 (raena) said :
#9

I have not been able to make time to rig my computer up to the USB. Will try this weekend sorry!

Revision history for this message
luh3417 (raena) said :
#10

I tried our HP3390 with a USB connection. Printing works but again not scanning. Here is the report:

hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.6b)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are
installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux kubuntufl 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64 GNU/Linux

Distribution:
ubuntu 9.04

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.3.9
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.6b currently installed in '/usr/local/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.6b

[dirs]
home=/usr/local/share/hplip
run=/var/run
ppd=/usr/local/share/ppd/HP
ppdbase=/usr/local/share/ppd
doc=/usr/local/share/doc/hplip-3.9.6b
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/local/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.6b.4
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP_Color_LaserJet_2840_fax
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_3390?serial=00CNMJP40383"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.9.6b.4
date_time = 16/08/09 14:23:18

[settings]
systray_messages = 1
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------------------- ----------------------------------
  hp:/usb/HP_LaserJet_3390?serial=00CNMJP40383 HP LaserJet 3390

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP-LaserJet-3390
----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP40383
PPD: /etc/cups/ppd/HP-LaserJet-3390.ppd
PPD Description: HP LaserJet 3390 pcl3, hpcups 3.9.6b
Printer status: printer HP-LaserJet-3390 is idle. enabled since Sun 16 Aug 2009 14:12:38 EST
Communication status: Good

HP_Color_LaserJet_2840
----------------------
Type: Printer
Device URI: hp:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
PPD: /etc/cups/ppd/HP_Color_LaserJet_2840.ppd
PPD Description: HP Color LaserJet 2800 Series Postscript (recommended)
Printer status: printer HP_Color_LaserJet_2840 is idle. enabled since Tue 21 Jul 2009 11:41:39 EST
Communication status: Good

HP_Color_LaserJet_2840_fax
--------------------------
Type: Fax
Device URI: hpfax:/net/HP_Color_LaserJet_2840?ip=192.168.2.23
PPD: /etc/cups/ppd/HP_Color_LaserJet_2840_fax.ppd
PPD Description: HP Fax hpcups
Printer status: printer HP_Color_LaserJet_2840_fax is idle. enabled since Tue 21 Jul 2009 11:31:52 EST
Communication status: Good

HP_LaserJet_3390
----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP40383
PPD: /etc/cups/ppd/HP_LaserJet_3390.ppd
PPD Description: HP LaserJet 3390 Postscript (recommended)
Printer status: printer HP_LaserJet_3390 is idle. enabled since Mon 20 Jul 2009 15:30:14 EST
Communication status: Good

HP_LaserJet_3390_fax
--------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_3390?serial=00CNMJP40383
PPD: /etc/cups/ppd/HP_LaserJet_3390_fax.ppd
PPD Description: HP Fax hpcups
Printer status: printer HP_LaserJet_3390_fax is idle. enabled since Mon 20 Jul 2009 15:30:14 EST
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x3517 at 001:003:
    Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP40383
    Device node: /dev/bus/usb/001/003
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/003
# owner: lp
# group: lp
user::rw-
user:raena:rw-
group::rw-
mask::rw-
other::---

---------------
| USER GROUPS |
---------------

raena adm dialout cdrom plugdev lpadmin admin sambashare

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said :
#11

Everything looks correct.

Try running

sudo tail -f /var/log/syslog

then try and scan and post the entire syslog.

Thanks!

Aaron

Revision history for this message
Launchpad Janitor (janitor) said :
#12

This question was expired because it remained in the 'Needs information' state without activity for the last 15 days.

Revision history for this message
luh3417 (raena) said :
#13

Dear Launchpad Janitorbot please do not expire this question. I have to reconnect my PC via USB over the next weekend and get the syslog for Aaron.

Thanks
Raena

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said :
#14

Raena,

The posting expired because you didn't respond to my request for more information.

---

Everything looks correct.

Try running

sudo tail -f /var/log/syslog

then try and scan and post the entire syslog.

Thanks!

Aaron

Revision history for this message
luh3417 (raena) said :
#15

I just wanted you to know I am on the case and acknowledge your assistance.

Revision history for this message
luh3417 (raena) said :
#16

 Here is the syslog after trying to run scan; (looks like nada) there is a test print there.
tail -f /var/log/syslog

Sep 13 15:54:52 kubuntufl python: io/hpmud/hpmud.c 612: invalid channel_write state
Sep 13 15:54:52 kubuntufl python: io/hpmud/pml.c 461: GetPml channel_write failed ret=31
Sep 13 15:54:52 kubuntufl python: io/hpmud/hpmud.c 612: invalid channel_write state
Sep 13 15:54:52 kubuntufl python: io/hpmud/pml.c 461: GetPml channel_write failed ret=31
Sep 13 15:54:52 kubuntufl python: io/hpmud/hpmud.c 612: invalid channel_write state
Sep 13 15:54:52 kubuntufl python: io/hpmud/pml.c 461: GetPml channel_write failed ret=31
Sep 13 15:54:52 kubuntufl python: io/hpmud/hpmud.c 593: invalid channel_close state
Sep 13 15:55:03 kubuntufl hp[4266]: prnt/backend/hp.c 358: read pjl job_end: 0
Sep 13 15:56:56 kubuntufl anacron[3550]: Job `cron.daily' started
Sep 13 15:56:56 kubuntufl anacron[4654]: Updated timestamp for job `cron.daily' to 2009-09-13

Revision history for this message
luh3417 (raena) said :
#17

sorry here is the test print log:

Sep 13 15:59:28 kubuntufl python: io/hpmud/dot4.c 121: unexpected DOT4CreditRequest: cmd=4, hid=1, pid=1, maxcredit=8
Sep 13 15:59:28 kubuntufl last message repeated 4 times
Sep 13 15:59:50 kubuntufl hp[4853]: prnt/backend/hp.c 358: read pjl job_end: 0
Sep 13 16:00:01 kubuntufl /USR/SBIN/CRON[4979]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Sep 13 16:00:01 kubuntufl /USR/SBIN/CRON[4980]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd hourly 2>/dev/null)

Revision history for this message
Aaron Albright (albrigha-deactivatedaccount) said :
#18

The errors you are seeing usually indicate a permissions problem.

Run:

cat /etc/udev/rules.d/55-hpmud.rules

and post the output.

You may also want to consider upgrading to the latest HPLIP.

Thanks.

Aaron

Revision history for this message
luh3417 (raena) said :
#19

Thanks. Here is the output. Will upgrade asap.

cat /etc/udev/rules.d/55-hpmud.rules
# HPLIP udev rules file for HP printer and all-in-one products.
#
# Notes for downstream implementers.
#
# 1. The 55-hpmud.rules name was chosen in order to run after the default udev rule /etc/udev/rules.d/50-udev.rules. See
# "Writing udev rules" Ver 0.74, Daniel Drake. Although it seems 50-udev.rules is no longer used I continue to reuse "55-"
# name for backward compatibility with older distros. 2/11/2009, D Suffield
#
# 2. It seems SFSFS has been replaced or depreciated by ATTR/ATTRS, but I continue to use SFSFS in order to be compatible with
# older distros. SFSFS was defined in "Writing udev rules" Ver 0.72, Daniel Drake. 2/11/2009, D Suffield
#
# 3. This rules file is an attempt at being compatable with all distros. Feel free to make your own changes and if you feel your
# changes are not distro specific please send your patch to us. 2/11/2009, D Suffield
#

ACTION!="add", GOTO="hpmud_rules_end"
SUBSYSTEM=="ppdev", OWNER="lp", GROUP="lp", MODE="0660"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="pid_test"
SUBSYSTEM!="usb_device", GOTO="hpmud_rules_end"

LABEL="pid_test"

# Check for AiO products (0x03f0xx11).
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="??11", OWNER="lp", GROUP="lp", MODE="660"

# Check for Photosmart products without wildcard since cameras and scanners also used (0x03f0xx02).
# The xx02 pid has been retired so this explicit list should not change.
# photosmart_d2300_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c302", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_100
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3802", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_1115
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3402", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_1215
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3202", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_1218
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3302", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_130
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3902", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_1315
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3602", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_140_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1002", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_230
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3502", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_240_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1102", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_320_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1202", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_330_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1602", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_370_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1302", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_380_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1702", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_420_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1502", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_470_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1802", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7150
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3a02", OWNER="lp", GROUP="lp", MODE="660"
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3b02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7200_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="b002", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7345
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2002", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7350
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3c02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7400_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="b802", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7550
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="3e02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7600_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="b202", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7700_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="b402", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7800_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c002", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_7900_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="b602", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_8000_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c102", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_8100_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="ba02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_8200_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c202", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_8400_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="bb02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_8700_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="bc02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a310_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1d02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a320_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1e02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a430_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1902", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a440_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1f02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a510_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1a02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a520_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2602", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a530_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2b02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a610_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1b02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a620_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2702", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a630_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2c02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a710_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="1c02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_a820_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="2902", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_d5060_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c802", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_d5100_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c402", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_d6100_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c502", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_d7100_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c602", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_d7300_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="c702", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_pro_b8300_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="be02", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_b8800_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="d002", OWNER="lp", GROUP="lp", MODE="660"
# photosmart_pro_b9100_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="bd02", OWNER="lp", GROUP="lp", MODE="660"
# Photosmart_B8500_series
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="d102", OWNER="lp", GROUP="lp", MODE="660"

# Check for Business Inkjet products (0x03f0xx12).
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="??12", OWNER="lp", GROUP="lp", MODE="660"
# Check for Deskjet products (0x03f0xx04).
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="??04", OWNER="lp", GROUP="lp", MODE="660"
# Check for LaserJet products (0x03f0xx17).
SYSFS{idVendor}=="03f0", SYSFS{idProduct}=="??17", OWNER="lp", GROUP="lp", MODE="660"

# Removed the following rule because FHS states that /etc should be reserved for static files only. This
# functionality should be done in a deb/rpm post install script. 2/11/2009, D Suffield
#
# If sane-bankends is installed add hpaio backend support to dll.conf if needed.
# ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c 'grep -q ^#hpaio /etc/sane.d/dll.conf;if [ $$? -eq 0 ];then sed -i -e s/^#hpaio/hpaio/ /etc/sane.d/dll.conf;else grep -q ^hpaio /etc/sane.d/dll.conf;if [ $$? -ne 0 ];then echo hpaio >>/etc/sane.d/dll.conf;fi;fi'"

LABEL="hpmud_rules_end"

Revision history for this message
luh3417 (raena) said :
#20

I installed hplip-3.9.8 now everything works AOK.
Thanks for your assistance and for all things HPLIP.