Frimeware

Please run hp-check -t and post the output.

Thanks.

Aaron

HP Linux Imaging and Printing System (ver. 3.9.4b)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux desktop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux

Distribution:
ubuntu 9.04

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.6.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: планировщик запущен
Version: 1.3.9
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.4b currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.4b

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-3.9.4b
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp/

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
cups-ppd-install=no
cups-drv-install=no
internal-tag=3.9.4b.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
eula = 1
installed = 1

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP_LaserJet_P1005
working_dir = .
device_uri = "hp:/usb/HP_LaserJet_P1005?serial=BC02QVB"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.9.4b.10
date_time = 06/12/09 21:03:20

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname Cam 3200 virtual device

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x3d17 at 001:014:
    Device node: /dev/bus/usb/001/014
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/014
# owner: lp
# group: lp
user::rw-
user:scorpey:rw-
group::rw-
mask::rw-
other::---

---------------
| USER GROUPS |
---------------

scorpey adm dialout cdrom plugdev lpadmin admin sambashare

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.

I don't see any errors.

What happens if you run:

sudo hp-setup

to configure the printer?

Thanks.

Aaron

I am sory for my English :-(

In install new printer I have ERROR

CAPTION: HP Device Manager - plugi-in installer

TXT: Firmware download to device failed
hp://usb/HP_LaserJet_P1005?serial=BC02QVB

and
i write in

scorpey@desktop:/usr/share/foo2xqx/firmware$ ls
sihpP1005.dl

But it for foo2xqx driver?

If use hplip driver - the PC sad that printing is compliting, but in real nathing print.

When i only install the Ubuntu 9.04 the printer work from box.

But now it not work.

AND!!!
This comand:

cd /usr/share/doc/foo2zjs
getweb p1005
arm2hpdl sihpP1005.img > sihpP1005.dl
cp sihpP1005.dl /usr/share/foo2xqx/firmware/

Work in Ubuntu 8.10 BUT in Ubuntu 9.04 work not.

The foo2 driver will conflict with the HPLIP driver.

Try running:

sudo apt-get remove foo2zjs

then delete all the printers queues, and run: sudo hp-setup to configure the printer.

Aaron

Can`t find
hp-laserjet_p1005-hpijs.ppd

???

whear may download?

Can`t find
hp-laserjet_p1005-hpijs.ppd

???

whear may download?

And when i printing

Device communication error

And when i printing

Device communication error

The ppd is included in the HPLIP install.

Can you run:

sudo hp-setup -g

go through the setup steps, and post the output?

Thanks.

Aaron

If I go through setup steps i have

1- Device communication error
(Error 5012 and other)

2- The PC write that printing document is Done... BUT in real nathing print.

14 Jun (now) I update Ubuntu automatic and
thr printer lets work.

Whot it?
May be moons or stars?