I can't install the hp Laser Printer 107w

1. My Linux distribution: Ubuntu 16.04
2. My printer HP Laser Printer 107w
3. hp-ckeck -t :
hp-check -t
Saving output in log file: /home/euclides/hp-check.log

HP Linux Imaging and Printing System (ver. 3.18.6)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
    OK
    MISSING - Missing Dependency or Permission or Plug-in
    INCOMPAT - Incompatible dependency-version or Plugin-version

---------------
| SYSTEM INFO |
---------------

 Kernel: 4.15.0-133-generic #137~16.04.1-Ubuntu SMP Fri Jan 15 02:55:05 UTC 2021 GNU/Linux
 Host: euclides-HP-350-G1
 Proc: 4.15.0-133-generic #137~16.04.1-Ubuntu SMP Fri Jan 15 02:55:05 UTC 2021 GNU/Linux
 Distribution: ubuntu 16.04
 Bitness: 32 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.18.6
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 16.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.18.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-3.18.6
html=/usr/share/doc/hplip-3.18.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.18.6

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 02/23/21 00:07:38
version = 3.18.6

[upgrade]
notify_upgrade = true
last_upgraded_time = 1565745915
pending_upgrade_time = 0
latest_available_version = 3.17.10

[last_used]
device_uri = "hp:/usb/HP_LaserJet_P1005?serial=L404R9Q"
printer_name = HP_LaserJet_P1005
working_dir = /home/euclides/Downloads/hplip-3.18.6.run

[settings]
systray_visible = 0
systray_messages = 0

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =

 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

--------------------------
| External Dependencies |
--------------------------

 gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
 dbus DBus - Message bus system REQUIRED - 1.10.6 OK -
 scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
 avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
 cups CUPS - Common Unix Printing System REQUIRED 1.1 2.1.3 OK 'CUPS Scheduler is running'
 network network -wget OPTIONAL - 1.17.1 OK -
 policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
 xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -

-------------------------
| General Dependencies |
-------------------------

 python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
 python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
 cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.1.3 OK -
 sane-devel SANE - Scanning library development files REQUIRED - 1.0.25 OK -
 libjpeg libjpeg - JPEG library REQUIRED - - OK -
 python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
 cups-image CUPS image - CUPS image development files REQUIRED - 2.1.3 OK -
 libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
 python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
 python3-devel Python devel - Python development files REQUIRED 2.2 3.5.2 OK -
 python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.4 OK -
 libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 OK -
 python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
 python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.2 OK -
 libusb libusb - USB library REQUIRED - 1.0 OK -
 sane SANE - Scanning library REQUIRED - 1.0.25 OK -
 libpthread libpthread - POSIX threads library REQUIRED - b'2.23' OK -
 python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -

---------------
| COMPILEDEP |
---------------

 make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
 libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
 gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.4.0 OK -

----------------------
| Python Extentions |
----------------------

 hpmudext IO-Extension REQUIRED - 3.18.6 OK -
 cupsext CUPS-Extension REQUIRED - 3.18.6 OK -

-----------------------
| Scan Configuration |
-----------------------

 scanext Scan-SANE-Extension REQUIRED - 3.18.6 OK -
 hpaio HPLIP-SANE-Backend REQUIRED - 3.18.6 OK 'hpaio found in /etc/sane.d/dll.conf'

-----------------------
| Other Dependencies |
-----------------------

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP_LaserJet_P1005
-----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_P1005?serial=L404R9Q
PPD: /etc/cups/ppd/HP_LaserJet_P1005.ppd
PPD Description: HP LaserJet p1005, hpcups 3.16.3, requires proprietary plugin
Printer status: printer HP_LaserJet_P1005 disabled since So 21 Feb 2021 18:54:49 CET - Unplugged or turned off
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_P1005?serial=L404R9Q
error: Device not found
error: Communication status: Failed

--------------
| PERMISSION |
--------------

error: Unsupported model: HP_Laser_107w

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None

Total Errors: 1
Total Warnings: 0

Done.
euclides@euclides-HP-350-G1:~$ hplip setup

4. I cannot install the printer, though I downloaded and installed the required Driver.. hplip does not want to install it because it says it is not supported, but the instruction manual says it is. What can I do? Give it back?

5. 1 I downloaded and installed the driver for UBUNTU ( from your homepage)
     2 I ran hplip to identify and install the printer ( I have already done it before)
     3 hplip does not recognise the device.It says " No Devices Found"
     4 I ran hp-check and it says this device is not supported.. Is there a way to install it without using WINE? Of course I could install it using WINE but I want to do it using UBUNTU as I have always done so far

Thank You Very Much for your Help!!

Regards

Euclides Granado