Instalar HP Laserjet 1000 en Linux Mint 20

Asked by J. P. on 2020-12-25

1. Distribución y versión de Linux: Linux Mint 20 x86_64
2. Marca / modelo de su impresora: HP Laserjet 1000 series
3. Si es posible, ejecute 'hp-check -t' y publique el resultado.
k@k-B550M-DS3H:~$ hp-check -t
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/k/hp-check.log

HP Linux Imaging and Printing System (ver. 3.20.11)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
    OK
    MISSING - Missing Dependency or Permission or Plug-in
    INCOMPAT - Incompatible dependency-version or Plugin-version

---------------
| SYSTEM INFO |
---------------

 Kernel: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
 Host: k-B550M-DS3H
 Proc: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
 Distribution: 22 20
 Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.11
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for linuxmint distro 20 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.20.11

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.11
html=/usr/share/doc/hplip-3.20.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.11

Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[fax]
email_address =
voice_phone =

[installation]
date_time = 12/25/20 23:53:01
version = 3.20.11

[last_used]
device_uri = "hp:/usb/hp_LaserJet_1000?serial=0"
printer_name =
working_dir = /home/k/Descargas/hplip-3.20.11-plugin.run

[polling]
device_list =
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 0

[upgrade]
last_upgraded_time = 1608923348
latest_available_version = 3.17.10
notify_upgrade = false
pending_upgrade_time = 0

 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
 gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
 xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
 scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
 dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
 policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
 network network -wget OPTIONAL - 1.20.3 OK -
 avahi-utils avahi-utils OPTIONAL - 0.7 OK -

------------------------
| General Dependencies |
------------------------

 libjpeg libjpeg - JPEG library REQUIRED - - OK -
 cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
 cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
 libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
 libusb libusb - USB library REQUIRED - 1.0 OK -
 sane SANE - Scanning library REQUIRED - - OK -
 sane-devel SANE - Scanning library development files REQUIRED - - OK -
 libavahi-dev libavahi-dev REQUIRED - - OK -
 libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
 libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
 python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
 python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
 python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
 python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
 python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
 python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
 python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 OK -
 python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
 python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -

--------------
| COMPILEDEP |
--------------

 libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
 gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
 make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -

---------------------
| Python Extentions |
---------------------

 cupsext CUPS-Extension REQUIRED - 3.20.11 OK -
 hpmudext IO-Extension REQUIRED - 3.20.11 OK -

----------------------
| Scan Configuration |
----------------------

 hpaio HPLIP-SANE-Backend REQUIRED - 3.20.11 OK 'hpaio found in /etc/sane.d/dll.conf'
 scanext Scan-SANE-Extension REQUIRED - 3.20.11 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/Deskjet_3520_series?serial=CN35K1G45T05SY' is a Hewlett-Packard Deskjet_3520_series all-in-one
device `hpaio:/usb/Deskjet_3520_series?serial=CN35K1G45T05SY' is a Hewlett-Packard Deskjet_3520_series all-in-one

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  ------------------------------------------------- -----------------------------------------------
  hp:/usb/hp_LaserJet_1000?serial=0 HP LaserJet 1000
  hp:/usb/Deskjet_3520_series?serial=CN35K1G45T05SY HP Deskjet 3520 series

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet_3520
------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN35K1G45T05SY
PPD: /etc/cups/ppd/Deskjet_3520.ppd
warning: Failed to read /etc/cups/ppd/Deskjet_3520.ppd ppd file
PPD Description:
Printer status: la impresora Deskjet_3520 está inactiva. activada desde sáb 19 dic 2020 22:34:10
Communication status: Good

hp-LaserJet-1000
----------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1000?serial=0
PPD: /etc/cups/ppd/hp-LaserJet-1000.ppd
PPD Description: HP LaserJet 1000 Foomatic/foo2zjs (recommended)
Printer status: la impresora hp-LaserJet-1000 está inactiva. activada desde vie 25 dic 2020 23:05:57
Communication status: Good

--------------
| PERMISSION |
--------------

USB hp-LaserJet-1000 Required - - OK Node:'/dev/bus/usb/005/007' Perm:' root lp rw- rw- rw- rw- r--'
USB Deskjet_3520 Required - - OK Node:'/dev/bus/usb/001/004' Perm:' root lp rw- rw- rw- rw- r--'
No errors or warnings.

Done.

He realizado muchas veces la instalación de la impresora HP Laserjet 1000 series en un ordenador PC de sobremesa con Linux Mint 20 Cinnamon, y la impresora queda instalada, pero no hay forma de instalar el plu-gin (se instala con éxito pero da error o se desinstala automáticamente)
Al final al instalar el plu-gin ocurre esto:

Downloading firmware to device hp:/usb/hp_LaserJet_1000?serial=0...
Firmware download successful.

 Plug-in installation successful

Done.
error: The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins. Visit http://hplipopensource.com for more infomation.

Done.

¿Hay alguna solución? ¿Se puede usar algún otro plu-gin diferente al hplip-3.20.11-plugin.run?
Muchas gracias por su ayuda.

Question information

Language:
Spanish Edit question
Status:
Expired
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
2020-12-30
Last reply:
2021-01-15
J. P. (josmos) said : #1
Launchpad Janitor (janitor) said : #2

This question was expired because it remained in the 'Open' state without activity for the last 15 days.