Unable to Install Plugin

Asked by Naveen Kumar on 2019-10-16

Linux Distribution: ubuntu 18.04 LTS
Printer Make/Model: HP LaserJet 1020 Plus

hp-check -t output:

Saving output in log file: /home/countrydelight/Downloads/hp-check.log

HP Linux Imaging and Printing System (ver. 3.19.8)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
    OK
    MISSING - Missing Dependency or Permission or Plug-in
    INCOMPAT - Incompatible dependency-version or Plugin-version

|Gtk-Message: 18:48:15.351: Failed to load module "canberra-gtk-module"
/Gtk-Message: 18:48:15.398: Failed to load module "canberra-gtk-module"

---------------
| SYSTEM INFO |
---------------

 Kernel: 4.15.0-1057-oem #66-Ubuntu SMP Wed Sep 18 14:20:12 UTC 2019 GNU/Linux
 Host: countrydelight-Vostro-3480
 Proc: 4.15.0-1057-oem #66-Ubuntu SMP Wed Sep 18 14:20:12 UTC 2019 GNU/Linux
 Distribution: 12 18.04
 Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.19.8
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 18.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.19.8

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.19.8
html=/usr/share/doc/hplip-3.19.8
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.19.8
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.19.8

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1571231443
pending_upgrade_time = 0

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/HP_LaserJet_1020?serial=S45E1SJ"
printer_name = HP-LaserJet-1020
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =

[installation]
date_time = Wednesday 16 October 2019 18:48:16
version = 3.19.8

 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

--------------
| COMPILEDEP |
--------------

 gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK -
 make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
 libtool libtool - Library building support services REQUIRED - 2.4.6 OK -

------------------------
| General Dependencies |
------------------------

 libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
 python-xml Python XML libraries REQUIRED - 2.2.5 OK -
 libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
 sane-devel SANE - Scanning library development files REQUIRED - - OK -
 pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
 pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.12.1 OK -
 libpthread libpthread - POSIX threads library REQUIRED - 2.27 OK -
 python-devel Python devel - Python development files REQUIRED 2.2 2.7.15 OK -
 cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK -
 python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
 cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
 reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
 pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK -
 libusb libusb - USB library REQUIRED - 1.0 OK -
 cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK -
 python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.15 OK -
 python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
 libjpeg libjpeg - JPEG library REQUIRED - - OK -
 sane SANE - Scanning library REQUIRED - - OK -

----------------------
| Scan Configuration |
----------------------

 scanext Scan-SANE-Extension REQUIRED - 3.19.8 OK -
 hpaio HPLIP-SANE-Backend REQUIRED - 3.19.8 OK 'hpaio found in /etc/sane.d/dll.conf'

-------------------------
| External Dependencies |
-------------------------

 gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
 scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
 cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running'
 network network -wget OPTIONAL - 1.19.4 OK -
 policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
Gtk-Message: 18:48:21.052: Failed to load module "canberra-gtk-module"
Gtk-Message: 18:48:21.107: Failed to load module "canberra-gtk-module"
 xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
 dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
 avahi-utils avahi-utils OPTIONAL - 0.7 OK -

---------------------
| Python Extentions |
---------------------

 hpmudext IO-Extension REQUIRED - 3.19.8 OK -
 cupsext CUPS-Extension REQUIRED - 3.19.8 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/net/hp_laserjet_pro_mfp_m128fw?ip=192.168.1.37&queue=false' is a Hewlett-Packard hp_laserjet_pro_mfp_m128fw all-in-one
device `hpaio:/net/hp_laserjet_pro_mfp_m128fw?ip=192.168.1.37&queue=false' is a Hewlett-Packard hp_laserjet_pro_mfp_m128fw all-in-one

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  --------------------------------------- ------------------------------
  hp:/usb/HP_LaserJet_1020?serial=S45E1SJ HP LaserJet 1020

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP-LaserJet-1020
----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1020?serial=S45E1SJ
PPD: /etc/cups/ppd/HP-LaserJet-1020.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-1020.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-1020 is idle. enabled since Wednesday 16 October 2019 06:44:25 PM IST
Communication status: Good

--------------
| PERMISSION |
--------------

USB HP-LaserJet-1020 Required - - OK Node:'/dev/bus/usb/001/030' Perm:' root lp rw- rw- rw- rw- r--'
No errors or warnings.

Done.

unable to install plugin

unable to print

Question information

Language:
English Edit question
Status:
Answered
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
2019-10-16
Last reply:
2019-10-21
shivani mandora (shivani1708) said : #1

Hi,

Can you try installing plugin using below command:
$sh hplip-3.19.8.plugin.run

Please install plugin from below path:
https://developers.hp.com/hp-linux-imaging-and-printing/plugins

If you still face any issue after this, please let me know.

Can you help with this problem?

Provide an answer of your own, or ask Naveen Kumar for more information if necessary.

To post a message you must log in.