HP MFP M477fnw - Compatibility with Linux Arm 64
Dear HP Printer Support
We are evaluating printers that are compatible with an Arm 64 based Processor Rockchip RK3399, and Firefly RK3399 Open Source Development Board, running Linux
We are considering an HP Colour Laser Pro (CF377A) MFP M477 fnw
Are you able to confirm that this printer will be compatible with the Rockchip RK3399?
Please find below the output from our system command (hp-check -t)
If you can assist with our enquiry, that would be appreciated
Regards Mike Milne
Saving output in log file: /home/firefly/
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.4.77 #329 SMP Mon Dec 18 15:44:03 CST 2017 GNU/Linux
Host: Interface
Proc: 4.4.77 #329 SMP Mon Dec 18 15:44:03 CST 2017 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-------
| HPLIP CONFIGURATION |
-------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
html=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
bin=/usr/bin
apparmor=
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/
[installation]
date_time = 11/09/18 23:44:17
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------
| External Dependencies |
-------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.25 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
-------
| General Dependencies |
-------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.6 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.6 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
-------
| Python Extentions |
-------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
-------
| Scan Configuration |
-------
'/etc/sane.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
-------
| DISCOVERED SCANNER DEVICES |
-------
No Scanner found.
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-------
error: 'libcups2' package is missing/
error: 'libjpeg-dev' package is missing/
error: 'libcups2-dev' package is missing/
error: 'cups-bsd' package is missing/
error: 'cups-client' package is missing/
error: 'libcupsimage2-dev' package is missing/
error: 'libusb-1.0.0-dev' package is missing/
error: 'libsane-dev' package is missing/
error: 'libsnmp-dev' package is missing/
error: 'snmp-mibs-
error: 'openssl' package is missing/
error: 'python3-pyqt4' package is missing/
error: 'gtk2-engines-
error: 'python3-dev' package is missing/
error: 'libtool' package is missing/
error: 'libtool-bin' package is missing/
Missing Optional Dependencies
-------
error: 'gtk2-engines-
error: 'xsane' package is missing/
error: 'python3-notify2' package is missing/
error: 'python3-
Total Errors: 14
Total Warnings: 0
Done.
Question information
- Language:
- English Edit question
- Status:
- Expired
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
