HPLIP

HP LaserJet Professional p1102 does not print

Asked by Dmitry Bobrovsky

OS: Debian 9
$ uname -a
Linux workstation3 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux
Printer: HP LaserJet Professional p1102

I'm trying to print a test page but I get an error:
In CUPS admin page: "Filter failed"
In log file: prnt/hpcups/HPCupsFilter.cpp 647: DEBUG: imageProcessorStartPage failed result = 2

What to do to make the printer work?

-----------------------------------------------------------------------------------------------------------------
E [06/Nov/2018:12:55:16 +0300] [Job 180] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Nov/2018:12:55:16 +0300] [Job 180] The following messages were recorded from 12:54:54 to 12:55:16
D [06/Nov/2018:12:55:16 +0300] [Job 180] Adding start banner page "none".
D [06/Nov/2018:12:55:16 +0300] [Job 180] Adding end banner page "none".
D [06/Nov/2018:12:55:16 +0300] [Job 180] File of type application/vnd.cups-pdf-banner queued by "anonymous".
D [06/Nov/2018:12:55:16 +0300] [Job 180] hold_until=0
D [06/Nov/2018:12:55:16 +0300] [Job 180] Queued on "HP_LaserJet_Professional_P1102" by "anonymous".
D [06/Nov/2018:12:55:16 +0300] [Job 180] time-at-processing=1541498094
D [06/Nov/2018:12:55:16 +0300] [Job 180] 4 filters for job:
D [06/Nov/2018:12:55:16 +0300] [Job 180] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [06/Nov/2018:12:55:16 +0300] [Job 180] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [06/Nov/2018:12:55:16 +0300] [Job 180] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [06/Nov/2018:12:55:16 +0300] [Job 180] hpcups (application/vnd.cups-raster to printer/HP_LaserJet_Professional_P1102, cost 0)
D [06/Nov/2018:12:55:16 +0300] [Job 180] job-sheets=none,none
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[0]="HP_LaserJet_Professional_P1102"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[1]="180"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[2]="anonymous"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[3]="Test Page"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[4]="1"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[5]="job-uuid=urn:uuid:f32f87c5-6b16-3e4d-7c06-b62e0d3423b6 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1541498094 time-at-processing=1541498094"
D [06/Nov/2018:12:55:16 +0300] [Job 180] argv[6]="/var/spool/cups/d00180-001"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[8]="HOME=/var/spool/cups/tmp"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[10]="SERVER_ADMIN=root@workstation3"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[11]="SOFTWARE=CUPS/2.2.1"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[13]="USER=root"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[14]="CUPS_MAX_MESSAGE=2047"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[17]="IPP_PORT=631"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[18]="CHARSET=utf-8"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[19]="LANG=ru_RU.UTF-8"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[20]="PPD=/etc/cups/ppd/HP_LaserJet_Professional_P1102.ppd"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[21]="RIP_MAX_CACHE=128m"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[23]="DEVICE_URI=hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q815HRMPR1a"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[24]="PRINTER_INFO=HP_LaserJet_Professional_P1102"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[25]="PRINTER_LOCATION="
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[26]="PRINTER=HP_LaserJet_Professional_P1102"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[27]="PRINTER_STATE_REASONS=none"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[28]="CUPS_FILETYPE=document"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[30]="AUTH_I****"
D [06/Nov/2018:12:55:16 +0300] [Job 180] Started filter /usr/lib/cups/filter/bannertopdf (PID 1448)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Started filter /usr/lib/cups/filter/pdftopdf (PID 1449)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Started filter /usr/lib/cups/filter/gstoraster (PID 1450)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Started filter /usr/lib/cups/filter/hpcups (PID 1451)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Started backend /usr/lib/cups/backend/hp (PID 1452)
D [06/Nov/2018:12:55:16 +0300] [Job 180] pdftopdf: Last filter determined by the PPD: hpcups; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [06/Nov/2018:12:55:16 +0300] [Job 180] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [06/Nov/2018:12:55:16 +0300] [Job 180] PDF template file doesn\'t have form. It\'s okay.
D [06/Nov/2018:12:55:16 +0300] [Job 180] PID 1448 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [06/Nov/2018:12:55:16 +0300] [Job 180] PID 1449 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [06/Nov/2018:12:55:16 +0300] [Job 180] Color Manager: Calibration Mode/Off
D [06/Nov/2018:12:55:16 +0300] [Job 180] Calling FindDeviceById(cups-HP_LaserJet_Professional_P1102)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Found device /org/freedesktop/ColorManager/devices/cups_HP_LaserJet_Professional_P1102
D [06/Nov/2018:12:55:16 +0300] [Job 180] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Calling FindDeviceById(cups-HP_LaserJet_Professional_P1102)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Found device /org/freedesktop/ColorManager/devices/cups_HP_LaserJet_Professional_P1102
D [06/Nov/2018:12:55:16 +0300] [Job 180] Calling GetProfileForQualifiers(Gray.Plain....)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Found profile /org/freedesktop/ColorManager/profiles/HP_LaserJet_Professional_P1102_Gray__
D [06/Nov/2018:12:55:16 +0300] [Job 180] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [06/Nov/2018:12:55:16 +0300] [Job 180] Use profile filename: \'\'
D [06/Nov/2018:12:55:16 +0300] [Job 180] Color Manager: ICC Profile:
D [06/Nov/2018:12:55:16 +0300] [Job 180] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [06/Nov/2018:12:55:16 +0300] [Job 180] Ghostscript command line: gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=841 -dcupsBitsPerColor=1 -dcupsColorOrder=0 -dcupsColorSpace=3 -dcupsRowCount=1 -dcupsRowStep=2 -dcupsInteger0=9 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[18.000000 15.500000 18.000000 15.500000] /Margins[0 0]>>setpagedevice\' -f -_
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[7]=\"CUPS_STATEDIR=/var/run/cups\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[10]=\"SERVER_ADMIN=root@workstation3\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[11]=\"SOFTWARE=CUPS/2.2.1\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[12]=\"TMPDIR=/var/spool/cups/tmp\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[13]=\"USER=root\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[14]=\"CUPS_MAX_MESSAGE=2047\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[15]=\"CUPS_SERVER=/var/run/cups/cups.sock\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[16]=\"CUPS_ENCRYPTION=IfRequested\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[17]=\"IPP_PORT=631\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[18]=\"CHARSET=utf-8\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[19]=\"LANG=ru_RU.UTF-8\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[20]=\"PPD=/etc/cups/ppd/HP_LaserJet_Professional_P1102.ppd\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[21]=\"RIP_MAX_CACHE=128m\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[22]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[23]=\"DEVICE_URI=hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q815HRMPR1a\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[24]=\"PRINTER_INFO=HP_LaserJet_Professional_P1102\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[25]=\"PRINTER_LOCATION=\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[26]=\"PRINTER=HP_LaserJet_Professional_P1102\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[27]=\"PRINTER_STATE_REASONS=none\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[28]=\"CUPS_FILETYPE=document\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[29]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] envp[30]=\"AUTH_INFO_REQUIRED=none\"
D [06/Nov/2018:12:55:16 +0300] [Job 180] Start rendering...
D [06/Nov/2018:12:55:16 +0300] [Job 180] Set job-printer-state-message to "Start rendering...", current level=INFO
D [06/Nov/2018:12:55:16 +0300] [Job 180] Processing page 1...
D [06/Nov/2018:12:55:16 +0300] [Job 180] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/hpcups/HPCupsFilter.cpp 647: DEBUG: imageProcessorStartPage failed result = 2
D [06/Nov/2018:12:55:16 +0300] [Job 180] STATE: +connecting-to-device
D [06/Nov/2018:12:55:16 +0300] [Job 180] STATE: -connecting-to-device
D [06/Nov/2018:12:55:16 +0300] [Job 180] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
D [06/Nov/2018:12:55:16 +0300] [Job 180] PAGE: 1 1\r
D [06/Nov/2018:12:55:16 +0300] [Job 180] PID 1451 (/usr/lib/cups/filter/hpcups) crashed on signal 11.
D [06/Nov/2018:12:55:16 +0300] [Job 180] Hint: Try setting the LogLevel to "debug" to find out more.
D [06/Nov/2018:12:55:16 +0300] [Job 180] Processing page 2...
D [06/Nov/2018:12:55:16 +0300] [Job 180] Rendering completed
D [06/Nov/2018:12:55:16 +0300] [Job 180] PID 1450 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/backend/hp.c 376: read new pjl status: 10023
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/backend/hp.c 376: read new pjl status: 10007
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/backend/hp.c 378: read pjl job_end: 0
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/backend/hp.c 376: read new pjl status: 10023
D [06/Nov/2018:12:55:16 +0300] [Job 180] prnt/backend/hp.c 376: read new pjl status: 10001
D [06/Nov/2018:12:55:16 +0300] [Job 180] ready to print
D [06/Nov/2018:12:55:16 +0300] [Job 180] PID 1452 (/usr/lib/cups/backend/hp) exited with no errors.
D [06/Nov/2018:12:55:16 +0300] [Job 180] End of messages
D [06/Nov/2018:12:55:16 +0300] [Job 180] printer-state=3(idle)
D [06/Nov/2018:12:55:16 +0300] [Job 180] printer-state-message="ready to print"
D [06/Nov/2018:12:55:16 +0300] [Job 180] printer-state-reasons=none

Question information

Language:
English Edit question
Status:
Expired
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Dmitry Bobrovsky (ministrbob) said : 		#1

hp-check[2374]: info: :
hp-check[2374]: info: :[01mHP Linux Imaging and Printing System (ver. 3.18.10)[0m
hp-check[2374]: info: :[01mDependency/Version Check Utility ver. 15.1[0m
hp-check[2374]: info: :
hp-check[2374]: info: :Copyright (c) 2001-15 HP Development Company, LP
hp-check[2374]: info: :This software comes with ABSOLUTELY NO WARRANTY.
hp-check[2374]: info: :This is free software, and you are welcome to distribute it
hp-check[2374]: info: :under certain conditions. See COPYING file for more details.
hp-check[2374]: info: :
hp-check[2374]: info: :[01mNote: hp-check can be run in three modes:[0m
hp-check[2374]: info: :1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
hp-check[2374]: info: :2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
hp-check[2374]: info: :3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
hp-check[2374]: info: :
hp-check[2374]: info: :Check types:
hp-check[2374]: info: :a. EXTERNALDEP - External Dependencies
hp-check[2374]: info: :b. GENERALDEP - General Dependencies (required both at compile and run time)
hp-check[2374]: info: :c. COMPILEDEP - Compile time Dependencies
hp-check[2374]: info: :d. [All are run-time checks]
hp-check[2374]: info: :PYEXT SCANCONF QUEUES PERMISSION
hp-check[2374]: info: :
hp-check[2374]: info: :Status Types:
hp-check[2374]: info: : OK
hp-check[2374]: info: : MISSING - Missing Dependency or Permission or Plug-in
hp-check[2374]: info: : INCOMPAT - Incompatible dependency-version or Plugin-version
hp-check[2374]: info: :
hp-check[2374]: info: :
hp-check[2374]: info: :---------------
hp-check[2374]: info: :| SYSTEM INFO |
hp-check[2374]: info: :---------------
hp-check[2374]: info: :
hp-check[2374]: info: : Kernel: 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) GNU/Linux
 Host: workstation3
 Proc: 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) GNU/Linux
 Distribution: 2 9.5
hp-check[2374]: info: : Bitness: 64 bit

hp-check[2374]: info: :
hp-check[2374]: info: :-----------------------
hp-check[2374]: info: :| HPLIP CONFIGURATION |
hp-check[2374]: info: :-----------------------
hp-check[2374]: info: :
hp-check[2374]: info: :HPLIP-Version: HPLIP 3.18.10
hp-check[2374]: info: :HPLIP-Home: /usr/share/hplip
hp-check[2374]: info: :HPLIP-Installation: Auto installation is supported for debian distro 9.5 version
hp-check[2374]: info: :
hp-check[2374]: info: :[01mCurrent contents of '/etc/hp/hplip.conf' file:[0m
hp-check[2374]: info: :# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.18.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.18.10
html=/usr/share/doc/hplip-3.18.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

hp-check[2374]: info: :
hp-check[2374]: info: :[01mCurrent contents of '/var/lib/hp/hplip.state' file:[0m
hp-check[2374]: info: :[plugin]
installed = 1
eula = 1
version = 3.18.10

hp-check[2374]: info: :
hp-check[2374]: info: :[01mCurrent contents of '~/.hplip/hplip.conf' file:[0m
warning: Could not access file: Нет такого файла или каталога
hp-check[2374]: info: : <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
hp-check[2374]: info: :
hp-check[2374]: info: :--------------
hp-check[2374]: info: :| COMPILEDEP |
hp-check[2374]: info: :--------------
hp-check[2374]: info: :
hp-check[2374]: info: : gcc gcc - GNU Project C and C++ Compiler REQUIRED - 6.3.0 OK -
hp-check[2374]: info: : make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
hp-check[2374]: info: : libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
hp-check[2374]: info: :
hp-check[2374]: info: :------------------------
hp-check[2374]: info: :| General Dependencies |
hp-check[2374]: info: :------------------------
hp-check[2374]: info: :
hp-check[2374]: info: : pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.7 OK -
hp-check[2374]: info: : libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
hp-check[2374]: info: : python-xml Python XML libraries REQUIRED - 2.2.0 OK -
hp-check[2374]: info: : libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
hp-check[2374]: info: : sane-devel SANE - Scanning library development files REQUIRED - - OK -
hp-check[2374]: info: : pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
hp-check[2374]: info: : libpthread libpthread - POSIX threads library REQUIRED - 2.24 OK -
hp-check[2374]: info: : python-devel Python devel - Python development files REQUIRED 2.2 2.7.13 OK -
hp-check[2374]: info: : cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.1 OK -
hp-check[2374]: info: : python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.4 OK -
hp-check[2374]: info: : cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
hp-check[2374]: info: : reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
hp-check[2374]: info: : pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.7 OK -
hp-check[2374]: info: : libusb libusb - USB library REQUIRED - 1.0 OK -
hp-check[2374]: info: : cups-image CUPS image - CUPS image development files REQUIRED - 2.2.1 OK -
hp-check[2374]: info: : python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.13 OK -
hp-check[2374]: info: : python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
hp-check[2374]: info: : libjpeg libjpeg - JPEG library REQUIRED - - OK -
hp-check[2374]: info: : sane SANE - Scanning library REQUIRED - - OK -
hp-check[2374]: info: :
hp-check[2374]: info: :----------------------
hp-check[2374]: info: :| Scan Configuration |
hp-check[2374]: info: :----------------------
hp-check[2374]: info: :
hp-check[2374]: info: : scanext Scan-SANE-Extension REQUIRED - 3.18.10 OK -
hp-check[2374]: info: : hpaio HPLIP-SANE-Backend REQUIRED - 3.18.10 OK 'hpaio found in /etc/sane.d/dll.conf'
hp-check[2374]: info: :
hp-check[2374]: info: :-------------------------
hp-check[2374]: info: :| External Dependencies |
hp-check[2374]: info: :-------------------------
hp-check[2374]: info: :
hp-check[2374]: info: : gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.20 OK -
hp-check[2374]: info: : scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
hp-check[2374]: info: : cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.1 OK 'CUPS Scheduler is running'
hp-check[2374]: info: : network network -wget OPTIONAL - 1.18 OK -
hp-check[2374]: info: : policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
hp-check[2374]: info: : xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
hp-check[2374]: info: : dbus DBus - Message bus system REQUIRED - 1.10.26 OK -
hp-check[2374]: info: : avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
hp-check[2374]: info: :
hp-check[2374]: info: :---------------------
hp-check[2374]: info: :| Python Extentions |
hp-check[2374]: info: :---------------------
hp-check[2374]: info: :
hp-check[2374]: info: : hpmudext IO-Extension REQUIRED - 3.18.10 OK -
hp-check[2374]: info: : cupsext CUPS-Extension REQUIRED - 3.18.10 OK -
hp-check[2374]: info: :
hp-check[2374]: info: :------------------------------
hp-check[2374]: info: :| DISCOVERED SCANNER DEVICES |
hp-check[2374]: info: :------------------------------
hp-check[2374]: info: :
hp-check[2374]: info: :No Scanner found.
hp-check[2374]: info: :
hp-check[2374]: info: :--------------------------
hp-check[2374]: info: :| DISCOVERED USB DEVICES |
hp-check[2374]: info: :--------------------------
hp-check[2374]: info: :
hp-check[2374]: info: : Device URI Model
hp-check[2374]: info: : ------------------------------------------------------------------ -----------------------------------------------
hp-check[2374]: info: : hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q815HRMPR1a HP LaserJet Professional P1102
hp-check[2374]: info: :
hp-check[2374]: info: :---------------------------------
hp-check[2374]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[2374]: info: :---------------------------------
hp-check[2374]: info: :
hp-check[2374]: info: :
hp-check[2374]: info: :[01m1[0m
hp-check[2374]: info: :[01m-[0m
hp-check[2374]: info: :Type: Unknown
hp-check[2374]: info: :Device URI: ///dev/null
hp-check[2374]: info: :
hp-check[2374]: info: :[01mHP_LaserJet_Professional_P1102[0m
hp-check[2374]: info: :[01m------------------------------[0m
hp-check[2374]: info: :Type: Printer
hp-check[2374]: info: :Device URI: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q815HRMPR1a
hp-check[2374]: info: :PPD: /etc/cups/ppd/HP_LaserJet_Professional_P1102.ppd
hp-check[2374]: info: :PPD Description: HP LaserJet Professional p1102, hpcups 3.18.10, requires proprietary plugin
hp-check[2374]: info: :Printer status: принтер HP_LaserJet_Professional_P1102 свободен. Включен с момента Вт 06 ноя 2018 13:15:21
 ready to print
hp-check[2374]: info: :Required plug-in status: Installed
hp-check[2374]: info: :Communication status: Good
hp-check[2374]: info: :
hp-check[2374]: info: :[01mZebra[0m
hp-check[2374]: info: :[01m-----[0m
hp-check[2374]: info: :Type: Unknown
hp-check[2374]: info: :Device URI: socket://10.20.148.26:9100
hp-check[2374]: info: :PPD: /etc/cups/ppd/Zebra.ppd
hp-check[2374]: info: :PPD Description: Zebra ZPL Label Printer
hp-check[2374]: info: :Printer status: принтер Zebra свободен. Включен с момента Пт 19 окт 2018 10:40:16
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-check[2374]: info: :
hp-check[2374]: info: :[01mZebra-2[0m
hp-check[2374]: info: :[01m-------[0m
hp-check[2374]: info: :Type: Unknown
hp-check[2374]: info: :Device URI: socket://10.20.148.26:9100
hp-check[2374]: info: :PPD: /etc/cups/ppd/Zebra-2.ppd
hp-check[2374]: info: :PPD Description: Zebra ZPL Label Printer
hp-check[2374]: info: :Printer status: принтер Zebra-2 свободен. Включен с момента Пт 19 окт 2018 10:32:47
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-check[2374]: info: :
hp-check[2374]: info: :[01mZebra_Technologies_ZTC_TLP_2824_Plus[0m
hp-check[2374]: info: :[01m------------------------------------[0m
hp-check[2374]: info: :Type: Unknown
hp-check[2374]: info: :Device URI: implicitclass:Zebra_Technologies_ZTC_TLP_2824_Plus
hp-check[2374]: info: :PPD: /etc/cups/ppd/Zebra_Technologies_ZTC_TLP_2824_Plus.ppd
hp-check[2374]: info: :PPD Description: Remote printer: Zebra ZPL Label Printer
hp-check[2374]: info: :Printer status: принтер Zebra_Technologies_ZTC_TLP_2824_Plus свободен. Включен с момента Вт 06 ноя 2018 12:49:56
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-check[2374]: info: :
hp-check[2374]: info: :
hp-check[2374]: info: :--------------
hp-check[2374]: info: :| PERMISSION |
hp-check[2374]: info: :--------------
hp-check[2374]: info: :
hp-check[2374]: info: :USB HP_LaserJet_Professional_P1102 Required - - OK Node:'/dev/bus/usb/001/004' Perm:' root lp rw- rw- rw- rw- rw- r--'
hp-check[2374]: info: :
hp-check[2374]: info: :-----------
hp-check[2374]: info: :| SUMMARY |
hp-check[2374]: info: :-----------
hp-check[2374]: info: :
hp-check[2374]: info: :[01mMissing Required Dependencies[0m
hp-check[2374]: info: :[01m-----------------------------[0m
hp-check[2374]: info: :None
hp-check[2374]: info: :
hp-check[2374]: info: :[01mMissing Optional Dependencies[0m
hp-check[2374]: info: :[01m-----------------------------[0m
hp-check[2374]: info: :None

hp-check[2374]: info: :
hp-check[2374]: info: :Total Errors: 0
hp-check[2374]: info: :Total Warnings: 4
hp-check[2374]: info: :
hp-check[2374]: info: :
hp-check[2374]: info: :Done.

Revision history for this message
Launchpad Janitor (janitor) said : 		#2

This question was expired because it remained in the 'Open' state without activity for the last 15 days.