hp printer not discoverable
Hello,
Printer: Photosmart C4780
OS: AntiX (Debian Stretch 9.4)
uname -r → 4.10.5-
hplip 3.16.11+repack0-3
Printer Config Page confirms it does sees surrounding SSIDs, including the target one.
Router Log entries:
2018-04-24 12:34:31 kern warn kernel wlan0: A wireless client is deauthenticated - <MAC_Printer>
2018-04-24 12:34:15 kern warn kernel wlan0: A STA is rejected by 802.1x daemon (reason=15) - <MAC_Printer>
also returned a (reason=1).
Besides hp-setup -i option 1 (net), CUPS http://
$ sudo apt-get install printer-
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
cups cups-core-drivers cups-daemon cups-filters cups-filters-
cups-
libfontembed1 libhpmud0 libqpdf17 libsane-hpaio libwebpdemux2 printer-
python3-pexpect python3-pil python3-ptyprocess python3-reportlab
python3-
Suggested packages:
cups-bsd foomatic-
printer-
python-
python-
Recommended packages:
printer-
The following NEW packages will be installed:
cups cups-browsed cups-core-drivers cups-daemon cups-filters
cups-
libavahi-glib1 libcupscgi1 libcupsmime1 libcupsppdc1 libfontembed1 libhpmud0
libqpdf17 libsane-hpaio libwebpdemux2 printer-
printer-
python3-reportlab python3-
0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
Need to get 12.8 MB of archives.
After this operation, 29.3 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
Fetched 12.8 MB in 12s (1,004 kB/s)
Preconfiguring packages ...
Selecting previously unselected package libcupsmime1:amd64.
(Reading database ... 120319 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking libcupsmime1:amd64 (2.2.1-
Selecting previously unselected package ssl-cert.
Preparing to unpack .../01-
Unpacking ssl-cert (1.0.39) ...
Selecting previously unselected package cups-daemon.
Preparing to unpack .../02-
Unpacking cups-daemon (2.2.1-
Selecting previously unselected package libcupscgi1:amd64.
Preparing to unpack .../03-
Unpacking libcupscgi1:amd64 (2.2.1-
Selecting previously unselected package libcupsppdc1:amd64.
Preparing to unpack .../04-
Unpacking libcupsppdc1:amd64 (2.2.1-
Selecting previously unselected package libqpdf17:amd64.
Preparing to unpack .../05-
Unpacking libqpdf17:amd64 (6.0.0-2) ...
Selecting previously unselected package cups-filters-
Preparing to unpack .../06-
Unpacking cups-filters-
Selecting previously unselected package cups-core-drivers.
Preparing to unpack .../07-
Unpacking cups-core-drivers (2.2.1-
Selecting previously unselected package cups-server-common.
Preparing to unpack .../08-
Unpacking cups-server-common (2.2.1-
Selecting previously unselected package cups-ppdc.
Preparing to unpack .../09-
Unpacking cups-ppdc (2.2.1-
Selecting previously unselected package libfontembed1:
Preparing to unpack .../10-
Unpacking libfontembed1:amd64 (1.11.6-3) ...
Selecting previously unselected package cups-filters.
Preparing to unpack .../11-
Unpacking cups-filters (1.11.6-3) ...
Selecting previously unselected package cups.
Preparing to unpack .../12-
Unpacking cups (2.2.1-
Selecting previously unselected package libavahi-
Preparing to unpack .../13-
Unpacking libavahi-
Selecting previously unselected package cups-browsed.
Preparing to unpack .../14-
Unpacking cups-browsed (1.11.6-3) ...
Selecting previously unselected package hplip-data.
Preparing to unpack .../15-
Unpacking hplip-data (3.16.11+repack0-3) ...
Selecting previously unselected package libhpmud0:amd64.
Preparing to unpack .../16-
Unpacking libhpmud0:amd64 (3.16.11+repack0-3) ...
Selecting previously unselected package libsane-
Preparing to unpack .../17-
Unpacking libsane-hpaio:amd64 (3.16.11+repack0-3) ...
Selecting previously unselected package printer-
Preparing to unpack .../18-
Unpacking printer-
Selecting previously unselected package python3-ptyprocess.
Preparing to unpack .../19-
Unpacking python3-ptyprocess (0.5.1-1) ...
Selecting previously unselected package python3-pexpect.
Preparing to unpack .../20-
Unpacking python3-pexpect (4.2.1-1) ...
Selecting previously unselected package libwebpdemux2:
Preparing to unpack .../21-
Unpacking libwebpdemux2:amd64 (0.5.2-1) ...
Selecting previously unselected package python3-pil:amd64.
Preparing to unpack .../22-
Unpacking python3-pil:amd64 (4.0.0-4) ...
Selecting previously unselected package python3-
Preparing to unpack .../23-
Unpacking python3-
Selecting previously unselected package python3-reportlab.
Preparing to unpack .../24-
Unpacking python3-reportlab (3.3.0-2) ...
Selecting previously unselected package hplip.
Preparing to unpack .../25-
Unpacking hplip (3.16.11+repack0-3) ...
Selecting previously unselected package printer-
Preparing to unpack .../26-
Unpacking printer-
Selecting previously unselected package qpdf.
Preparing to unpack .../27-
Unpacking qpdf (6.0.0-2) ...
Setting up cups-server-common (2.2.1-
Setting up libcupsmime1:amd64 (2.2.1-
Setting up ssl-cert (1.0.39) ...
Setting up cups-daemon (2.2.1-
[ ok ] Starting Common Unix Printing System: cupsd.
Setting up hplip-data (3.16.11+repack0-3) ...
Setting up libcupsppdc1:amd64 (2.2.1-
Setting up libfontembed1:amd64 (1.11.6-3) ...
Setting up libqpdf17:amd64 (6.0.0-2) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Setting up libwebpdemux2:amd64 (0.5.2-1) ...
Setting up cups-filters-
Processing triggers for man-db (2.7.6.1-2) ...
Setting up python3-
Setting up libavahi-
Setting up qpdf (6.0.0-2) ...
Processing triggers for dbus (1.10.26-
Setting up libhpmud0:amd64 (3.16.11+repack0-3) ...
Setting up python3-ptyprocess (0.5.1-1) ...
Setting up libcupscgi1:amd64 (2.2.1-
Setting up libsane-hpaio:amd64 (3.16.11+repack0-3) ...
Setting up python3-pil:amd64 (4.0.0-4) ...
Setting up cups-filters (1.11.6-3) ...
[ ok ] Reloading Common Unix Printing System: cupsd.
.
Setting up cups-browsed (1.11.6-3) ...
[ ok ] Starting CUPS Bonjour daemon: cups-browsed.
Setting up cups-ppdc (2.2.1-
Setting up cups-core-drivers (2.2.1-
Setting up python3-reportlab (3.3.0-2) ...
Setting up python3-pexpect (4.2.1-1) ...
Setting up cups (2.2.1-
Updating PPD files for cups ...
Setting up printer-
Setting up hplip (3.16.11+repack0-3) ...
Creating/updating hplip user account...
dpkg-statoverride: warning: --update given but /var/run/hplip does not exist
Setting up printer-
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for dbus (1.10.26-
$ sudo hp-setup -i -g
[sudo] password for nbah:
HP Linux Imaging and Printing System (ver. 3.16.11)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-setup[4785]: debug: param=
hp-setup[4785]: debug: selected_
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
-------
| SELECT CONNECTION (I/O) TYPE |
-------
Num Connection Description
Type
-------- ---------- -------
0* usb Universal Serial Bus (USB)
1 net Network/
2 par Parallel Port (LPT:)
Enter number 0...2 for connection type (q=quit, enter=usb*) ? 1
Using connection type: net
hp-setup[4785]: debug:
DEVICE CHOOSER setup_fax=True, setup_print=True
hp-setup[4785]: debug: getDeviceUri(None, None, ('hp',), None, , True)
hp-setup[4785]: debug: Mode=0
error: No device selected/specified or that supports this functionality.
$ hp-check
Saving output in log file: /home/nbah/
HP Linux Imaging and Printing System (ver. 3.16.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed
to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied
package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check
both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: antix distro is not found in AUTH_TYPES
warning: 0-17 version is not supported. Using 0-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.10.5-
Host: GHPAX
Proc: 4.10.5-
Distribution: 0 17
Bitness: 64 bit
-------
| HPLIP CONFIGURATION |
-------
HPLIP-Version: HPLIP 3.16.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 0 distro 17 version
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.11
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
html=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
bin=/usr/bin
apparmor=
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/
[installation]
date_time = 04/26/18 01:07:29
version = 3.16.11
[last_used]
device_uri = hp:/usb/
printer_name = Photosmart_C4700
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------
| Scan Configuration |
-------
'/etc/sane.
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.11 OK 'hpaio found in /etc/sane.
scanext Scan-SANE-Extension REQUIRED - 3.16.11 OK -
-------
| Python Extentions |
-------
hpmudext IO-Extension REQUIRED - 3.16.11 OK -
cupsext CUPS-Extension REQUIRED - 3.16.11 OK -
--------------
| COMPILEDEP |
--------------
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 6.3.0 OK -
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
-------
| General Dependencies |
-------
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.5.3 MISSING 'python3-devel needs to be installed'
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 MISSING 'libcrypto needs to be installed'
python3-xml Python XML libraries REQUIRED - 2.2.0 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.3 OK -
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.24' OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.4 OK -
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
-------
| External Dependencies |
-------
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
error: dbus DBus - Message bus system REQUIRED - 1.10.26 MISSING 'DBUS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.20 OK -
network network -wget OPTIONAL - 1.18 OK -
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
-------
| DISCOVERED SCANNER DEVICES |
-------
device `hpaio:
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
ial=BR9AGFM05
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Photosmart
----------
Type: Unknown
Device URI: usb://HP/
PPD: /etc/cups/
PPD Description: Generic IPP Everywhere Printer
Printer status: printer Photosmart is idle. enabled since Thu 26 Apr 2018 12:09:40 AM -03
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-------
None
Missing Optional Dependencies
-------
None
Total Errors: 13
Total Warnings: 1
Done.
$ CUPS_DEBUG_LEVEL=2 /usr/lib/
DEBUG: OUT OID 11 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: IN OID 11 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: OUT OID 11 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 15 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 16 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 8 bytes .1.3.6.1.2.1.1.6.0
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 13 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 16 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 13 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 14 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 13 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: OUT OID 13 bytes .1.3.6.
DEBUG: OUT NULL VALUE 0 bytes
--
DEBUG: IN OID 11 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 15 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 16 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 8 bytes .1.3.6.1.2.1.1.6.0
DEBUG: IN OCTET STRING 6 bytes "gatevx"
--
DEBUG: IN OID 13 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 16 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 13 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 14 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 13 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
--
DEBUG: IN OID 13 bytes .1.3.6.
DEBUG: IN NULL VALUE 0 bytes
$ lpinfo -v
network beh
network lpd
network ipp14
network ipps
network socket
network ipp
network http
network https
direct usb://HP/
direct hp:/usb/
direct hpfax
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Shivani Mandora
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
|
Revision history for this message
|
#3 |
|
Revision history for this message
|
#4 |
