HP C7280 ICM Profile & SIP Error

SIP is a package that allows PyQt interface to Qt. Since it seems that PyQt
is reporting that its installed OK, and I assume that you can use the
toolbox, etc., it is safe to ignore.

On Sat, Sep 13, 2008 at 8:07 PM, Mark Thomson <
<email address hidden>> wrote:

> New question #45154 on HPLIP:
> https://answers.launchpad.net/hplip/+question/45154
>
> When I load Xsane the following message is received
>
> Error during CMS conversion:
> Could not open scanner ICM profile:
>
> This message is not received when i de-select "Enable Colour Management" in
> the preferences. but when i do that the scan results are less then what i
> would like them to be.
>
> Also i get the following error
>
> Checking SIP version...
> error: SIP not installed or version not found.
>
> What is SIP? Are these things that i can fix / or are they safe to ignore?
>
> Complete dump follows
>
> hp-check -r
>
> HP Linux Imaging and Printing System (ver. 2.8.7)
> Dependency/Version Check Utility ver. 14.0
>
> Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
> Note: hp-check can be run in three modes:
> 1. Compile-time check mode (-c or --compile): Use this mode before
> compiling the
> HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
> dependencies
> are installed to successfully compile HPLIP.
> 2. Run-time check mode (-r or --run): Use this mode to determine if a
> distro
> supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
> tarball
> has the proper dependencies installed to successfully run.
> 3. Both compile- and run-time check mode (-b or --both) (Default): This
> mode
> will check both of the above cases (both compile- and run-time
> dependencies).
>
> Saving output in log file: hp-check.log
>
> Initializing. Please wait...
>
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux desktop 2.6.24-19-generic #1 SMP Wed Aug 20 22:56:21 UTC 2008 i686
> GNU/Linux
>
> Distribution:
> ubuntu 8.04
>
> HPOJ running?
> No, HPOJ is not running (OK).
>
> Checking Python version...
> OK, version 2.5.2 installed
>
> Checking PyQt version...
> OK, version 3.17 installed.
>
> Checking SIP version...
> error: SIP not installed or version not found.
>
> Checking for CUPS...
> Status: scheduler is running
> Version: 1.3.7
> error_log is set to level: warn
> note: For troubleshooting printing issues, it is best to have the CUPS
> 'LogLevel'
> note: set to 'debug'. To set the LogLevel to debug, edit the file
> /etc/cups/cupsd.conf (as root),
> note: and change the line near the top of the file that begins with
> 'LogLevel' to read:
> note: LogLevel debug
> note: Save the file and then restart CUPS (see your OS/distro docs on how
> to restart CUPS).
> note: Now, when you print, helpful debug information will be saved to the
> file:
> note: /var/log/cups/error_log
> note: You can monitor this file by running this command in a console/shell:
> note: tail -f /var/log/cups/error_log
>
> Checking for dbus/python-dbus...
> dbus daemon is running.
> python-dbus version: 0.82.4
>
>
> ------------------------
> | RUNTIME DEPENDENCIES |
> ------------------------
>
>
> Checking for dependency: cups - Common Unix Printing System...
> OK, found.
>
> Checking for dependency: cups-ddk - CUPS driver development kit...
> OK, found.
>
> Checking for dependency: GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency: PIL - Python Imaging Library (required for
> commandline scanning with hp-scan)...
> OK, found.
>
> Checking for dependency: ppdev - Parallel port support kernel module....
> OK, found.
>
> Checking for dependency: PyQt - Qt interface for Python...
> OK, found.
>
> Checking for dependency: python-ctypes - A foreign function library for
> Python...
> OK, found.
>
> Checking for dependency: python-dbus - Python bindings for dbus...
> OK, found.
>
> Checking for dependency: Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
> Checking for dependency: Reportlab - PDF library for Python...
> OK, found.
>
> Checking for dependency: SANE - Scanning library...
> OK, found.
>
> Checking for dependency: scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency: xsane - Graphical scanner frontend for SANE...
> OK, found.
>
>
> ----------------------
> | HPLIP INSTALLATION |
> ----------------------
>
>
> Currently installed HPLIP version...
> HPLIP 2.8.7 currently installed in '/usr/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf. Generated from hplip.conf.in by configure.
>
> [hplip]
> version=2.8.7
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/ppd/hpijs/HP
> ppdbase=/usr/share/ppd/hpijs
> doc=/usr/share/doc/hplip-2.8.7
> icon=/usr/share/applications
> cupsbackend=/usr/lib/cups/backend
> cupsfilter=/usr/lib/cups/filter
> drv=/usr/share/cups/drv/hp/
>
> # Following values are determined at configure time and cannot be changed.
> [configure]
> network-build=yes
> pp-build=no
> gui-build=yes
> scanner-build=yes
> fax-build=yes
> dbus-build=yes
> cups11-build=no
> doc-build=yes
> shadow-build=no
> foomatic-drv-install=yes
> foomatic-ppd-install=no
> foomatic-rip-hplip-install=yes
> internal-tag=2.8.7.4
> restricted-build=no
>
>
>
> --------------------------
> | DISCOVERED USB DEVICES |
> --------------------------
>
> Device URI Model
> -------------------------------- --------------------------
> hp:/usb/Photosmart_C7200_series? HP Photosmart C7200 series
> serial=MY88FHJ66V04YG
>
> ---------------------------------
> | INSTALLED CUPS PRINTER QUEUES |
> ---------------------------------
>
>
> PDF
> ---
> Type: Unknown
> Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
> Device URI: cups-pdf:/
> PPD: /etc/cups/ppd/PDF.ppd
> PPD Description: Generic PDF file generator
> Printer status: printer PDF is idle. enabled since Sat 21 Jun 2008
> 20:09:42 WST
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
> Photosmart_C7200_series
> -----------------------
> Type: Printer
> Installed in HPLIP?: Yes, using the hp: CUPS backend.
> Device URI: hp:/usb/Photosmart_C7200_series?serial=MY88FHJ66V04YG
> PPD: /etc/cups/ppd/Photosmart_C7200_series.ppd
> PPD Description: HP PhotoSmart C7100 Foomatic/hpijs, hpijs 2.8.2
> Printer status: printer Photosmart_C7200_series is idle. enabled since Sun
> 14 Sep 2008 10:25:25 WST
> Communication status: Good
>
> Photosmart_C7200_series_fax
> ---------------------------
> Type: Fax
> Installed in HPLIP?: Yes, using the hpfax: CUPS backend.
> Device URI: hpfax:/usb/Photosmart_C7200_series?serial=MY88FHJ66V04YG
> PPD: /etc/cups/ppd/Photosmart_C7200_series_fax.ppd
> PPD Description: HP Fax
> Printer status: printer Photosmart_C7200_series_fax is idle. enabled since
> Fri 12 Sep 2008 20:37:04 WST
> Communication status: Good
>
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in '/etc/sane.d/dll.conf'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
> device `hpaio:/usb/Photosmart_C7200_series?serial=MY88FHJ66V04YG' is a
> Hewlett-Packard Photosmart_C7200_series all-in-one
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
> Checking 'hpmudext' I/O extension...
> OK, found.
>
> Checking 'scanext' SANE scanning extension...
> OK, found.
>
>
> -----------------
> | USB I/O SETUP |
> -----------------
>
>
> Checking for permissions of USB attached printers...
>
> HP Device 0x6511 at 005:003:
> Device URI: hp:/usb/Photosmart_C7200_series?serial=MY88FHJ66V04YG
> Device node: /dev/bus/usb/005/003
> Mode: 0666
> getfacl: Removing leading '/' from absolute path names
> # file: dev/bus/usb/005/003
> # owner: root
> # group: lp
> user::rw-
> group::rw-
> other::rw-
>
>
>
> -----------
> | SUMMARY |
> -----------
>
> error: 2 errors and/or warnings.
>
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
>
>
> Done.
>
> ******
>
> Any help would be welcome
>
>
> You received this question notification because you are a member of HP
> Linux Imaging and Printing, which is an answer contact for HPLIP.
>

Thanks for the answer