HPLIP

hp2575- scanner icm profile

Asked by Rhea Larson

after installing 8.04 scanner does not work properly
comes up with .....error during cms conversion...could not open scanner icm profile

Question information

Language:
English Edit question
Status:
Solved
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
John Hosszu (john-hosszu) said : 		#1

Good day

Could you post the output to the following command.

$ hp-check -t

Thanks

jh

Revision history for this message
Rhea Larson (rjaylarson) said : 		#2

here is results of hp-check -t

HP Linux Imaging and Printing System (ver. 2.8.2)
Dependency/Version Check Utility ver. 13.0

Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...
warning: Invalid drv_dir value: /usr/share/cups/drv/hp/

---------------
| SYSTEM INFO |
 ---------------

Basic system information:
Linux rhea-desktop 2.6.24-19-generic #1 SMP Wed Jun 18 14:43:41 UTC 2008 i686 GNU/Linux

Distribution:
ubuntu 8.04

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt version...
OK, version 3.17 installed.

Checking SIP version...
error: SIP not installed or version not found.

Checking for CUPS...
Status: scheduler is running
Version: 1.3.7

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
 ------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt - Qt interface for Python...
OK, found.

Checking for dependency: python-devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes python2.5-dev

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
 ----------------------

Currently installed HPLIP version...
HPLIP 2.8.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207

[hplip]
version=2.8.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.2.10

-------------------------------
| DISCOVERED PARALLEL DEVICES |
 -------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
 --------------------------

  Device URI Model
  -------------------------------- -------------------------
  hp:/usb/Photosmart_2570_series?s HP Photosmart 2570 series
  erial=MY68M1117K04DY

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
 ---------------------------------

PDF
---
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/ppd/PDF.ppd
PPD Description: Generic PDF file generator
Printer status: printer PDF is idle. enabled since Mon 22 Oct 2007 12:23:23 AM PDT
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Photosmart_2570_series
----------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Photosmart_2570_series?serial=MY68M1117K04DY
PPD: /etc/cups/ppd/Photosmart_2570_series.ppd
PPD Description: HP PhotoSmart 2570 Foomatic/hpijs, hpijs 2.8.2
Printer status: printer Photosmart_2570_series is idle. enabled since Mon 30 Jun 2008 09:50:14 AM PDT
Communication status: Good

Photosmart_2570_series2
-----------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Photosmart_2570_series?serial=MY68M1117K04DY
PPD: /etc/cups/ppd/Photosmart_2570_series2.ppd
PPD Description: HP PhotoSmart 2570 Foomatic/hpijs, hpijs 2.8.2
Printer status: printer Photosmart_2570_series2 is idle. enabled since Mon 30 Jun 2008 11:29:09 AM PDT
Communication status: Good

Photosmart_2575
---------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Photosmart_2570_series?serial=MY68M1117K04DY
PPD: /etc/cups/ppd/Photosmart_2575.ppd
PPD Description: HP PhotoSmart 2570 Foomatic/hpijs, hpijs 2.8.2.10 - HPLIP 2.8.2
Printer status: printer Photosmart_2575 is idle. enabled since Tue 01 Jul 2008 11:46:36 AM PDT
Communication status: Good

----------------------
| SANE CONFIGURATION |
 ----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).

Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_2570_series?serial=MY68M1117K04DY' is a Hewlett-Packard Photosmart_2570_series all-in-one

---------------------
| PYTHON EXTENSIONS |
 ---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
 -----------------

Checking for permissions of USB attached printers...

HP Device 0x4e11 at 005:004:
    Device URI: hp:/usb/Photosmart_2570_series?serial=MY68M1117K04DY
    Device node: /dev/bus/usb/005/004
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/005/004
# owner: lp
# group: scanner
user::rw-
user:rhea:rw-
group::rw-
mask::rw-
other::---

-----------
| SUMMARY |
 -----------

error: 4 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo apt-get install --yes --force-yes python2.5-dev

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

I have python 2.5.2 installed

thanks for help

Revision history for this message
John Hosszu (john-hosszu) said : 		#3

----------------------
| SANE CONFIGURATION |
 ----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).

Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_2570_series?serial=MY68M1117K04DY' is a Hewlett-Packard Photosmart_2570_series all-in-one

Could you add hpaio to your /etc/sane.d/dll.conf

Then try again.

Thanks

jh

Revision history for this message
Rhea Larson (rjaylarson) said : 		#4

Hello Just finished adding the hpaio did a reboot and the old message still comes up error during cms conversion, could not open scanner icm profile
Thanks for your patience
RL

Revision history for this message
Rhea Larson (rjaylarson) said : 		#5

Good Morning
SCANNER-HP2575
I have the scanner now working with GIMP fine but
if I use apps-graphics-xsane image to scan I still get that that warning error
also if I use apps- HPlip toolbox to scan I get same warning
I can live with this Thank you for all your help
RL

Revision history for this message
John Hosszu (john-hosszu) said : 		#6

Closing...if you change your mind in the future just open this back up.

Thanks

jh

Revision history for this message
Jeremy Northeast (jeremy-northeast) said : 		#7

If you turn off 'enable colour management' in Xsane preferences.

Revision history for this message
Rhea Larson (rjaylarson) said : 		#8

thank you Jeremy will try when I retun home R

On Wed, Dec 3, 2008 at 2:27 AM, Jeremy Northeast <
<email address hidden>> wrote:

> Your question #37853 on HPLIP changed:
> https://answers.edge.launchpad.net/hplip/+question/37853
>
> Jeremy Northeast posted a new comment:
> If you turn off 'enable colour management' in Xsane preferences.
>
> --
> You received this question notification because you are a direct
> subscriber of the question.
>