HPLIP

HP D2400 Communication Error

Asked by alienexplorers on 2008-06-05

I am trying to get my HP D2400 printer to print. When I start a print job, the printer starts by drawing in a piece of paper and then starts to print. After printing one line of text or graphics the printer stops and the power light starts flashing extremely fast. When I look at the status page of hplip toolbox it shows "Device Communications Error" with a code of 5012. I am using a USB 1.0 port with a 6 foot cable with inline balun. I have tried reconfiguring and reinstalling the printer in cups and hplip toolbox with no luck. Any help you could give would be appreciated since I would like to start using this printer.

Question information

Language:: English Edit question

Status:: Solved

For:: HPLIP Edit question

Assignee:: No assignee Edit question

Solved by:: alienexplorers

Solved:: 2008-06-06

Last query:: 2008-06-06

Last reply:: 2008-06-05

Link existing bug

Revision history for this message

Aaron Albright (albrigha-deactivatedaccount) said on 2008-06-05:

Please run hp-check -t and post the output.

Thanks!

Revision history for this message

alienexplorers (dfsjr47) said on 2008-06-05:

terminator@terminator-desktop:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 2.8.2)
Dependency/Version Check Utility ver. 13.0

Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...
warning: Invalid drv_dir value: /usr/share/cups/drv/hp/

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux terminator-desktop 2.6.24-18-generic #1 SMP Wed May 28 20:27:26 UTC 2008 i586 GNU/Linux

Distribution:
ubuntu 8.04

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt version...
OK, version 3.17 installed.

Checking SIP version...
error: SIP not installed or version not found.

Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: cups-devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libcupsys2-dev cupsys-bsd

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes build-essential

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes openssl

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libjpeg62-dev

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libtool

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt - Qt interface for Python...
OK, found.

Checking for dependency: python-devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes python2.5-dev

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
To install this dependency, execute this command:
sudo apt-get install --yes --force-yes sane-utils

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 2.8.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207

[hplip]
version=2.8.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.2.10

-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet_D2400_series
--------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Deskjet_D2400_series?serial=TH81U363BB04Y9
PPD: /etc/cups/ppd/Deskjet_D2400_series.ppd
PPD Description: HP DeskJet D2400 Foomatic/hpijs, hpijs 2.8.2
Printer status: printer Deskjet_D2400_series is idle. enabled since Thu 05 Jun 2008 06:20:14 PM EDT
error: Unable to communicate with device (code=12): hp:/usb/Deskjet_D2400_series?serial=TH81U363BB04Y9
error: Device not found

PDF
---
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/ppd/PDF.ppd
PPD Description: Generic PDF file generator
Printer status: printer PDF is idle. enabled since Tue 22 Apr 2008 01:54:42 PM EDT
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).

Checking output of 'scanimage -L'...
error: scanimage not found.

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x7a04 at 001:018:
warning: Device URI: (Makeuri FAILED)
Device node: /dev/bus/usb/001/018
Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/018
# owner: lp
# group: scanner
user::rw-
user:terminator:rw-
group::rw-
mask::rw-
other::---

-----------
| SUMMARY |
-----------

error: 15 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo apt-get install --yes --force-yes libcupsys2-dev cupsys-bsd
sudo apt-get install --yes --force-yes build-essential
sudo apt-get install --yes --force-yes openssl
sudo apt-get install --yes --force-yes libjpeg62-dev
sudo apt-get install --yes --force-yes libsnmp-dev
sudo apt-get install --yes --force-yes libtool
sudo apt-get install --yes --force-yes libusb-dev
sudo apt-get install --yes --force-yes python2.5-dev
sudo apt-get install --yes --force-yes libsane-dev
sudo apt-get install --yes --force-yes sane-utils

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

terminator@terminator-desktop:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 2.8.2)
Dependency/Version Check Utility ver. 13.0

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).