python-dbus wrong packet ?
Hi, i installed hplip in version 2.8.4. configuring our printer (Laserjet 1120n MFP) works fine, all settings could be done and the programm can connect to Printer (networkmode). but if i want to run any other hp-* program always the message was shown:
error: dbus failed to load (python-dbus ver. 0.80+ required). Exiting...
but i've installed dbus-1-python in version 0.82 (opensuse 10.3) .
How could i solve this problem ?
regards sebastian
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- gdecke
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Please run hp-check -t and post the output.
Thanks!
Aaron
|
Revision history for this message
|
#2 |
hi, here it comes:
hp-check -t
HP Linux Imaging and Printing System (ver. 2.8.4)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if
the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time
dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux linux-work1 2.6.22.
Distribution:
suse 10.3
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.1 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
OK, Version 4.7 installed
Checking for CUPS...
Status: Scheduler läuft
Version: 1.2.12
error_log is set to level: info
note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel'
note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/
note: and change the line near the top of the file that begins with 'LogLevel' to read:
note: LogLevel debug
note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS).
note: Now, when you print, helpful debug information will be saved to the file:
note: /var/log/
note: You can monitor this file by running this command in a console/shell:
note: tail -f /var/log/
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: dbus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
su -c "modprobe ppdev"
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.4 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207
[hplip]
version=2.8.4
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
-------
| DISCOVERED PARALLEL DEVICES |
-------
No devices found.
error: 'ppdev' kernel module not loaded.
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
warning: No queues found.
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
error: 2 errors and/or warnings.
Summary of needed commands to run to satisfy missing dependencies:
su -c "modprobe ppdev"
Please refer to the installation instructions at:
http://
Done.
I think these 2 errors are not important cause this printer is only has only a network connect and PDF wouldn't be nessecary.
regards sebastian
|
Revision history for this message
|
#3 |
Everything looks okay...
Assuming you get the error running hp-toolbox please run:
hp-toolbox -g
and post the output.
Thanks!
Aaron
|
Revision history for this message
|
#4 |
I hope that this output is okay, i'm connected via remote to this computer. for for, detailed output i had to wait 2 day's.
But there is a message about dbus...
hp-toolbox -g
HP Linux Imaging and Printing System (ver. 2.8.4)
HP Device Manager ver. 13.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-toolbox(
error: Unable to load dbus - Automatic status updates in HPLIP Device Manager will be disabled.
warning: Reportlab not installed. Fax coverpages disabled.
warning: Please install version 2.0+ of Reportlab for coverpage support.
Xlib: extension "XInputExtension" missing on display ":1.0".
Failed to get list of devices
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
hp-toolbox(
|
Revision history for this message
|
#5 |
The message:
error: Unable to load dbus - Automatic status updates in HPLIP Device Manager will be disabled.
Shouldn't cause any problems with you using hp-toolbox. However fax will not work.
A
|
Revision history for this message
|
#6 |
Well there is no faxmachine in this printer.
but i can't still printing.
|
Revision history for this message
|
#7 |
I do not understand how the initial comment
"configuring our printer (Laserjet 1120n MFP) works fine"
matches to the hp-check output
"INSTALLED CUPS PRINTER QUEUES ... warning: No queues found."
What results
lpstat -v -p
and what results
grep '^E' /var/log/
|
Revision history for this message
|
#8 |
well, "configuring" the printer works well. the were no errors.
but he wasn't able to print.
lpstat -v -p
Gerät für HP_LaserJet_
Gerät für printer: usb://Canon/iP2200
Drucker HP_LaserJet_
ready to print
Drucker printer ist frei. freigegeben seit Mi 16 Apr 2008 09:40:46 CEST
and grep. ...
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [11/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
E [15/Apr/
|
Revision history for this message
|
#9 |
I think the CUPS error_log messages
"(/usr/
indicates why you cannot print.
Change in /usr/lib/
my $debug = 0;
to
my $debug = 1;
Then try to print one single job with
echo Hello | lp -d HP_LaserJet_
and wait one minute and then attach the log files
/tmp/foomatic-
and
/tmp/foomatic-
But there is another problem:
According to what lpstat shows, the HP_LaserJet_
looks o.k. but hp-check reports "No queues found."
|
Revision history for this message
|
#10 |
okay, here is comes, but it is a very long output.
foomatic-rip.log:
foomatic-rip version $Revision: 1.1 $ running...
called with arguments: '1372', 'arbeitsaccount', '(stdin)', '1', 'PageSize=A4 job-uuid=
Parsing PPD file ...
Added option ColorSpace
Added option PageSize
Added option Model
Added option PrintoutMode
Added option InputSlot
Added option Duplex
Added option Quality
*cupsFilter: "application/
Added option PageRegion
Added option ImageableArea
Added option PaperDimension
Added option Font
Parameter Summary
-----------------
Spooler: cups
Printer: HP_LaserJet_
Shell: /bin/sh
PPD file: /etc/cups/
ATTR file:
Printer model: HP LaserJet M1522 MFP, hpijs 2.8.4
Options: PageSize=A4 job-uuid=
Job title: stdin
File(s) to be printed:
<STDIN>
GhostScript extra search path ('GS_LIB'): /usr/share/
Pondering option 'PageSize=A4'
Pondering option 'job-uuid=
Unknown option job-uuid=
=======
File: <STDIN>
=======
Reading PostScript input ...
--> This document is DSC-conforming!
-----------
Found: %%BeginProlog
Found: %%EndProlog
-----------
Found: %%BeginSetup
Found: %%BeginFeature: *PageRegion A4
Option: PageRegion=A4 --> Option will be set by PostScript interpreter
Found: %% FoomaticRIPOpti
Option: PageSize=A4 --> Setting option
Found: %%BeginFeature: *PrintoutMode Normal
Option: PrintoutMode=Normal --> Setting option
Found: %% FoomaticRIPOpti
Option: PrintoutMode=Normal --> Setting option
Found: %%BeginFeature: *InputSlot Default
Option: InputSlot=Default --> Setting option
Found: %% FoomaticRIPOpti
Option: InputSlot=Default --> Setting option
Found: %%BeginFeature: *Quality FromPrintoutMode
Option: Quality=
Found: %% FoomaticRIPOpti
Option: Quality=
Found: %%BeginFeature: *Duplex None
Option: Duplex=None --> Setting option
Found: %% FoomaticRIPOpti
Option: Duplex=None --> Setting option
Found: %%EndSetup
Inserting PostScript code for CUPS' page accounting
-----------
New page: 1 1
Inserting option code into "PageSetup" section.
Found: %%BeginPageSetup
Found: %%EndPageSetup
End of page header
Flushing FIFO.
Starting renderer
JCL: <job data>
renderer PID kid4=27660
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPO
Closing renderer
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHP
unable to open PrintContext object err=16
ESP Ghostscript 8.15.3: Can't start ijs server "hpijs"
**** Unable to open the initial device, quitting.
renderer return value: 1
renderer received signal: 1
tail process done writing data to STDOUT
KID4 finished
KID3 exited with status 3
Renderer exit stat: 3
Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
error: Datei oder Verzeichnis nicht gefunden (2)
Possible error on renderer command line or PostScript error. Check options.
$VAR1 = {
'prologprepend' => [],
'cupspagesetu
'cmd' => 'gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=
'currentcmd' => 'gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPO
'args' => [
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'ColorSpace',
'default' => undef,
'type' => ''
},
{
'userval' => 'A4',
'section' => 'AnySetup',
'vals' => [
{
'value' => 'Custom',
},
{
'comment' => 'Letter',
'value' => 'Letter',
},
{
'comment' => 'A4',
'value' => 'A4',
},
{
'comment' => 'Photo or 4x6 inch index card',
'value' => 'Photo',
},
{
'comment' => 'Photo or 5x7 inch index card',
'value' => 'Photo5x7',
},
{
'comment' => '3x5 inch index card',
'value' => '3x5',
},
{
'comment' => '5x8 inch index card',
'value' => '5x8',
},
{
'comment' => 'A5',
'value' => 'A5',
},
{
'comment' => 'A6',
'value' => 'A6',
},
{
'comment' => 'B5 (JIS)',
'value' => 'B5JIS',
},
{
'comment' => 'CD or DVD 80 mm',
'value' => 'CDDVD80',
},
{
'comment' => 'CD or DVD 120 mm',
'value' => 'CDDVD120',
},
{
'comment' => 'Envelope #10',
'value' => 'Env10',
},
{
'comment' => 'Envelope C5',
'value' => 'EnvC5',
},
{
'comment' => 'Envelope C6',
'value' => 'EnvC6',
},
{
'comment' => 'Envelope DL',
'value' => 'EnvDL',
},
{
'comment' => 'Envelope B5',
'value' => 'EnvISOB5',
},
{
'comment' => 'Envelope Monarch',
'value' => 'EnvMonarch',
},
{
'comment' => 'Executive',
'value' => 'Executive',
},
{
'comment' => 'American Foolscap',
'value' => 'FLSA',
},
{
'comment' => 'Hagaki',
'value' => 'Hagaki',
},
{
'comment' => 'Legal',
'value' => 'Legal',
},
{
'comment' => 'Oufuku-Hagaki',
'value' => 'Oufuku',
},
{
'comment' => '16K',
'value' => 'w558h774',
},
{
'comment' => 'Executive (JIS)',
'value' => 'w612h935',
}
],
'notfirst' => 1,
'
'
'order' => 10,
'vals_byname' => {
'CDDVD120' => {},
'Letter' => {},
'EnvC5' => {},
'3x5' => {},
'Hagaki' => {},
'5x8' => {},
'Custom' => {},
'Env10' => {},
'EnvC6' => {},
'A6' => {},
'EnvDL' => {},
'w612h935' => {},
'w558h774' => {},
'A5' => {},
'Photo5x7' => {},
'Oufuku' => {},
'A4' => {},
'Photo' => {},
'B5JIS' => {},
'Executive' => {},
'CDDVD80' => {},
'EnvISOB5' => {},
'Legal' => {},
'FLSA' => {}
},
'proto' => '%s',
'name' => 'PageSize',
'style' => 'C',
'default' => 'Letter',
'spot' => 'A',
'currentpage' => 'A4',
'comment' => 'Media Size',
'type' => 'enum',
'header' => 'A4'
},
{
'userval' => 'HP-LaserJet_4',
'proto' => '%s',
'style' => 'C',
'name' => 'Model',
'default' => 'HP-LaserJet_4',
'vals' => [
{
'value' => 'HP-LaserJet_4',
}
],
'spot' => 'A',
'currentpage' => 'HP-LaserJet_4',
'
'
'order' => 100,
'type' => 'enum',
'vals_byname' => {
},
'header' => 'HP-LaserJet_4'
},
{
'userval' => 'Normal',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Draft (Economy)',
'value' => 'Draft',
},
{
'comment' => '',
'value' => 'Normal',
},
{
'comment' => 'High Quality',
'value' => 'High',
}
],
'notfirst' => 1,
'order' => '10.0',
'vals_byname' => {
'High' => {},
'Draft' => {},
'Normal' => {}
},
'proto' => '%s',
'jclsetup' => undef,
'name' => 'PrintoutMode',
'style' => 'X',
'default' => 'Normal',
'spot' => 'B',
'setup' => undef,
'currentpage' => 'Normal',
'comment' => 'Printout Mode',
'type' => 'enum',
'prolog' => undef,
'pagesetup' => undef,
'header' => 'Normal'
},
{
'userval' => 'Default',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Printer default',
'value' => 'Default',
},
{
'comment' => 'Photo Tray',
'value' => 'PhotoTray',
},
{
'comment' => 'Upper Tray',
'value' => 'Upper',
},
{
'comment' => 'Lower Tray',
'value' => 'Lower',
},
{
'comment' => 'CD or DVD Tray',
'value' => 'CDDVDTray',
},
{
'comment' => 'Envelope Feeder',
'value' => 'Envelope',
},
{
'comment' => 'Large Capacity Tray',
'value' => 'LargeCapacity',
},
{
'comment' => 'Manual Feeder',
'value' => 'Manual',
},
{
'comment' => 'Multi Purpose Tray',
'value' => 'MPTray',
}
],
'notfirst' => 1,
'
'
'order' => '100.0',
'vals_byname' => {
'Default' => {},
'Envelope' => {},
'CDDVDTray' => {},
'MPTray' => {},
'Manual' => {},
'PhotoTray' => {},
'Lower' => {},
'Upper' => {}
},
'proto' => '%s',
'name' => 'InputSlot',
'style' => 'C',
'default' => 'Default',
'spot' => 'C',
'comment' => 'Media Source',
'currentpage' => 'Default',
'type' => 'enum',
'header' => 'Default'
},
{
'userval' => 'None',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Long Edge (Standard)',
'value' => 'DuplexNoTumble',
},
{
'comment' => 'Short Edge (Flip)',
'value' => 'DuplexTumble',
},
{
'comment' => 'Off',
'value' => 'None',
}
],
'notfirst' => 1,
'
'
'order' => '120.0',
'vals_byname' => {
'None' => {},
},
'proto' => '%s',
'name' => 'Duplex',
'style' => 'C',
'default' => 'None',
'spot' => 'A',
'comment' => 'Double-Sided Printing',
'currentpage' => 'None',
'type' => 'enum',
'header' => 'None'
},
{
'userval' => 'FromPrintoutMode',
'section' => 'AnySetup',
'vals' => [
{
'comment' => '300 dpi, Draft, Grayscale, Black Cartr.',
'value' => '300DraftGraysc
},
{
'comment' => '300 dpi, Grayscale, Black Cartr.',
'value' => '300GrayscaleK',
},
{
'comment' => '600 dpi, Grayscale, Black Cartr.',
'value' => '600GrayscaleK',
},
{
'comment' => 'Controlled by \'Printout Mode\'',
'value' => 'FromPrintoutMode'
}
],
'notfirst' => 1,
'
'
'order' => '100.0',
'vals_byname' => {
},
'proto' => '%s',
'name' => 'Quality',
'style' => 'C',
'default' => 'FromPrintoutMode',
'spot' => 'B',
'comment' => 'Resolution, Quality, Ink Type, Media Type',
'currentpage' => 'FromPrintoutMode',
'type' => 'enum',
'header' => 'FromPrintoutMode'
},
{
'userval' => 'A4',
'proto' => '%s',
'style' => 'G',
'name' => 'PageRegion',
'default' => 'Letter',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Letter',
'value' => 'Letter'
},
{
'comment' => 'A4',
'value' => 'A4'
},
{
'comment' => 'Photo or 4x6 inch index card',
'value' => 'Photo'
},
{
'comment' => 'Photo or 5x7 inch index card',
'value' => 'Photo5x7'
},
{
'comment' => '3x5 inch index card',
'value' => '3x5'
},
{
'comment' => '5x8 inch index card',
'value' => '5x8'
},
{
'comment' => 'A5',
'value' => 'A5'
},
{
'comment' => 'A6',
'value' => 'A6'
},
{
'comment' => 'B5 (JIS)',
'value' => 'B5JIS'
},
{
'comment' => 'CD or DVD 80 mm',
'value' => 'CDDVD80'
},
{
'comment' => 'CD or DVD 120 mm',
'value' => 'CDDVD120'
},
{
'comment' => 'Envelope #10',
'value' => 'Env10'
},
{
'comment' => 'Envelope C5',
'value' => 'EnvC5'
},
{
'comment' => 'Envelope C6',
'value' => 'EnvC6'
},
{
'comment' => 'Envelope DL',
'value' => 'EnvDL'
},
{
'comment' => 'Envelope B5',
'value' => 'EnvISOB5'
},
{
'comment' => 'Envelope Monarch',
'value' => 'EnvMonarch'
},
{
'comment' => 'Executive',
'value' => 'Executive'
},
{
'comment' => 'American Foolscap',
'value' => 'FLSA'
},
{
'comment' => 'Hagaki',
'value' => 'Hagaki'
},
{
'comment' => 'Legal',
'value' => 'Legal'
},
{
'comment' => 'Oufuku-Hagaki',
'value' => 'Oufuku'
},
{
'comment' => '16K',
'value' => 'w558h774'
},
{
'comment' => 'Executive (JIS)',
'value' => 'w612h935'
}
],
'notfirst' => 1,
'currentpage' => 'A4',
'comment' => 'Media Size',
'order' => 10,
'vals_byname' => {
'CDDVD120' => {},
'Letter' => {},
'EnvC5' => {},
'3x5' => {},
'Hagaki' => {},
'5x8' => {},
'Env10' => {},
'EnvC6' => {},
'A6' => {},
'EnvDL' => {},
'w612h935' => {},
'w558h774' => {},
'A5' => {},
'Photo5x7' => {},
'Oufuku' => {},
'A4' => {},
'Photo' => {},
'B5JIS' => {},
'Executive' => {},
'CDDVD80' => {},
'EnvISOB5' => {},
'Legal' => {},
'FLSA' => {}
},
'type' => 'enum',
'header' => 'A4'
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'ImageableArea',
'default' => undef,
'type' => ''
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'PaperDimension',
'default' => undef,
'type' => ''
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'Font',
'default' => undef,
'type' => ''
}
],
'args_byname' => {
'ImageableArea' => {},
'Duplex' => {},
'PaperDimen
'ColorSpace' => {},
'Model' => {},
'Font' => {},
'PageSize' => {},
'Quality' => {},
'PageRegion' => {},
'PrintoutMode' => {},
'InputSlot' => {}
},
'cupsfilter' => {
'applicatio
},
'setupprepend' => [],
'pagesetuppre
'id' => 'HP-LaserJet_4',
'driver' => 'hpijs'
};
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
Renderer process finished
Killing process 27659 (KID3)
Process dying with "Error closing renderer", exit stat: 3
error: Nicht erlaubter Seek (29)
$VAR1 = {
'prologprepend' => [],
'cupspagesetu
'cmd' => 'gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=
'currentcmd' => 'gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPO
'args' => [
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'ColorSpace',
'default' => undef,
'type' => ''
},
{
'userval' => 'A4',
'section' => 'AnySetup',
'vals' => [
{
'value' => 'Custom',
},
{
'comment' => 'Letter',
'value' => 'Letter',
},
{
'comment' => 'A4',
'value' => 'A4',
},
{
'comment' => 'Photo or 4x6 inch index card',
'value' => 'Photo',
},
{
'comment' => 'Photo or 5x7 inch index card',
'value' => 'Photo5x7',
},
{
'comment' => '3x5 inch index card',
'value' => '3x5',
},
{
'comment' => '5x8 inch index card',
'value' => '5x8',
},
{
'comment' => 'A5',
'value' => 'A5',
},
{
'comment' => 'A6',
'value' => 'A6',
},
{
'comment' => 'B5 (JIS)',
'value' => 'B5JIS',
},
{
'comment' => 'CD or DVD 80 mm',
'value' => 'CDDVD80',
},
{
'comment' => 'CD or DVD 120 mm',
'value' => 'CDDVD120',
},
{
'comment' => 'Envelope #10',
'value' => 'Env10',
},
{
'comment' => 'Envelope C5',
'value' => 'EnvC5',
},
{
'comment' => 'Envelope C6',
'value' => 'EnvC6',
},
{
'comment' => 'Envelope DL',
'value' => 'EnvDL',
},
{
'comment' => 'Envelope B5',
'value' => 'EnvISOB5',
},
{
'comment' => 'Envelope Monarch',
'value' => 'EnvMonarch',
},
{
'comment' => 'Executive',
'value' => 'Executive',
},
{
'comment' => 'American Foolscap',
'value' => 'FLSA',
},
{
'comment' => 'Hagaki',
'value' => 'Hagaki',
},
{
'comment' => 'Legal',
'value' => 'Legal',
},
{
'comment' => 'Oufuku-Hagaki',
'value' => 'Oufuku',
},
{
'comment' => '16K',
'value' => 'w558h774',
},
{
'comment' => 'Executive (JIS)',
'value' => 'w612h935',
}
],
'notfirst' => 1,
'
'
'order' => 10,
'vals_byname' => {
'CDDVD120' => {},
'Letter' => {},
'EnvC5' => {},
'3x5' => {},
'Hagaki' => {},
'5x8' => {},
'Custom' => {},
'Env10' => {},
'EnvC6' => {},
'A6' => {},
'EnvDL' => {},
'w612h935' => {},
'w558h774' => {},
'A5' => {},
'Photo5x7' => {},
'Oufuku' => {},
'A4' => {},
'Photo' => {},
'B5JIS' => {},
'Executive' => {},
'CDDVD80' => {},
'EnvISOB5' => {},
'Legal' => {},
'FLSA' => {}
},
'proto' => '%s',
'name' => 'PageSize',
'style' => 'C',
'default' => 'Letter',
'spot' => 'A',
'currentpage' => 'A4',
'comment' => 'Media Size',
'type' => 'enum',
'header' => 'A4'
},
{
'userval' => 'HP-LaserJet_4',
'proto' => '%s',
'style' => 'C',
'name' => 'Model',
'default' => 'HP-LaserJet_4',
'vals' => [
{
'value' => 'HP-LaserJet_4',
}
],
'spot' => 'A',
'currentpage' => 'HP-LaserJet_4',
'
'
'order' => 100,
'type' => 'enum',
'vals_byname' => {
},
'header' => 'HP-LaserJet_4'
},
{
'userval' => 'Normal',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Draft (Economy)',
'value' => 'Draft',
},
{
'comment' => '',
'value' => 'Normal',
},
{
'comment' => 'High Quality',
'value' => 'High',
}
],
'notfirst' => 1,
'order' => '10.0',
'vals_byname' => {
'High' => {},
'Draft' => {},
'Normal' => {}
},
'proto' => '%s',
'jclsetup' => undef,
'name' => 'PrintoutMode',
'style' => 'X',
'default' => 'Normal',
'spot' => 'B',
'setup' => undef,
'currentpage' => 'Normal',
'comment' => 'Printout Mode',
'type' => 'enum',
'prolog' => undef,
'pagesetup' => undef,
'header' => 'Normal'
},
{
'userval' => 'Default',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Printer default',
'value' => 'Default',
},
{
'comment' => 'Photo Tray',
'value' => 'PhotoTray',
},
{
'comment' => 'Upper Tray',
'value' => 'Upper',
},
{
'comment' => 'Lower Tray',
'value' => 'Lower',
},
{
'comment' => 'CD or DVD Tray',
'value' => 'CDDVDTray',
},
{
'comment' => 'Envelope Feeder',
'value' => 'Envelope',
},
{
'comment' => 'Large Capacity Tray',
'value' => 'LargeCapacity',
},
{
'comment' => 'Manual Feeder',
'value' => 'Manual',
},
{
'comment' => 'Multi Purpose Tray',
'value' => 'MPTray',
}
],
'notfirst' => 1,
'
'
'order' => '100.0',
'vals_byname' => {
'Default' => {},
'Envelope' => {},
'CDDVDTray' => {},
'MPTray' => {},
'Manual' => {},
'PhotoTray' => {},
'Lower' => {},
'Upper' => {}
},
'proto' => '%s',
'name' => 'InputSlot',
'style' => 'C',
'default' => 'Default',
'spot' => 'C',
'comment' => 'Media Source',
'currentpage' => 'Default',
'type' => 'enum',
'header' => 'Default'
},
{
'userval' => 'None',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Long Edge (Standard)',
'value' => 'DuplexNoTumble',
},
{
'comment' => 'Short Edge (Flip)',
'value' => 'DuplexTumble',
},
{
'comment' => 'Off',
'value' => 'None',
}
],
'notfirst' => 1,
'
'
'order' => '120.0',
'vals_byname' => {
'None' => {},
},
'proto' => '%s',
'name' => 'Duplex',
'style' => 'C',
'default' => 'None',
'spot' => 'A',
'comment' => 'Double-Sided Printing',
'currentpage' => 'None',
'type' => 'enum',
'header' => 'None'
},
{
'userval' => 'FromPrintoutMode',
'section' => 'AnySetup',
'vals' => [
{
'comment' => '300 dpi, Draft, Grayscale, Black Cartr.',
'value' => '300DraftGraysc
},
{
'comment' => '300 dpi, Grayscale, Black Cartr.',
'value' => '300GrayscaleK',
},
{
'comment' => '600 dpi, Grayscale, Black Cartr.',
'value' => '600GrayscaleK',
},
{
'comment' => 'Controlled by \'Printout Mode\'',
'value' => 'FromPrintoutMode'
}
],
'notfirst' => 1,
'
'
'order' => '100.0',
'vals_byname' => {
},
'proto' => '%s',
'name' => 'Quality',
'style' => 'C',
'default' => 'FromPrintoutMode',
'spot' => 'B',
'comment' => 'Resolution, Quality, Ink Type, Media Type',
'currentpage' => 'FromPrintoutMode',
'type' => 'enum',
'header' => 'FromPrintoutMode'
},
{
'userval' => 'A4',
'proto' => '%s',
'style' => 'G',
'name' => 'PageRegion',
'default' => 'Letter',
'section' => 'AnySetup',
'vals' => [
{
'comment' => 'Letter',
'value' => 'Letter'
},
{
'comment' => 'A4',
'value' => 'A4'
},
{
'comment' => 'Photo or 4x6 inch index card',
'value' => 'Photo'
},
{
'comment' => 'Photo or 5x7 inch index card',
'value' => 'Photo5x7'
},
{
'comment' => '3x5 inch index card',
'value' => '3x5'
},
{
'comment' => '5x8 inch index card',
'value' => '5x8'
},
{
'comment' => 'A5',
'value' => 'A5'
},
{
'comment' => 'A6',
'value' => 'A6'
},
{
'comment' => 'B5 (JIS)',
'value' => 'B5JIS'
},
{
'comment' => 'CD or DVD 80 mm',
'value' => 'CDDVD80'
},
{
'comment' => 'CD or DVD 120 mm',
'value' => 'CDDVD120'
},
{
'comment' => 'Envelope #10',
'value' => 'Env10'
},
{
'comment' => 'Envelope C5',
'value' => 'EnvC5'
},
{
'comment' => 'Envelope C6',
'value' => 'EnvC6'
},
{
'comment' => 'Envelope DL',
'value' => 'EnvDL'
},
{
'comment' => 'Envelope B5',
'value' => 'EnvISOB5'
},
{
'comment' => 'Envelope Monarch',
'value' => 'EnvMonarch'
},
{
'comment' => 'Executive',
'value' => 'Executive'
},
{
'comment' => 'American Foolscap',
'value' => 'FLSA'
},
{
'comment' => 'Hagaki',
'value' => 'Hagaki'
},
{
'comment' => 'Legal',
'value' => 'Legal'
},
{
'comment' => 'Oufuku-Hagaki',
'value' => 'Oufuku'
},
{
'comment' => '16K',
'value' => 'w558h774'
},
{
'comment' => 'Executive (JIS)',
'value' => 'w612h935'
}
],
'notfirst' => 1,
'currentpage' => 'A4',
'comment' => 'Media Size',
'order' => 10,
'vals_byname' => {
'CDDVD120' => {},
'Letter' => {},
'EnvC5' => {},
'3x5' => {},
'Hagaki' => {},
'5x8' => {},
'Env10' => {},
'EnvC6' => {},
'A6' => {},
'EnvDL' => {},
'w612h935' => {},
'w558h774' => {},
'A5' => {},
'Photo5x7' => {},
'Oufuku' => {},
'A4' => {},
'Photo' => {},
'B5JIS' => {},
'Executive' => {},
'CDDVD80' => {},
'EnvISOB5' => {},
'Legal' => {},
'FLSA' => {}
},
'type' => 'enum',
'header' => 'A4'
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'ImageableArea',
'default' => undef,
'type' => ''
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'PaperDimension',
'default' => undef,
'type' => ''
},
{
'proto' => '%s',
'
'
'order' => 0,
'style' => 'G',
'name' => 'Font',
'default' => undef,
'type' => ''
}
],
'args_byname' => {
'ImageableArea' => {},
'Duplex' => {},
'PaperDimen
'ColorSpace' => {},
'Model' => {},
'Font' => {},
'PageSize' => {},
'Quality' => {},
'PageRegion' => {},
'PrintoutMode' => {},
'InputSlot' => {}
},
'cupsfilter' => {
'applicatio
},
'setupprepend' => [],
'pagesetuppre
'id' => 'HP-LaserJet_4',
'driver' => 'hpijs'
};
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
$VAR1->
foomatic-rip.ps:
%!PS-Adobe-3.0
%%Creator: texttops/CUPS v1.2.12
%%CreationDate: Do 17 Apr 2008 14:04:07 CEST
%%Title: ((stdin))
%%For: (arbeitsaccount)
%%DocumentNeede
%%+ font Courier
%%+ font Symbol
%%DocumentSuppl
%%+ font Courier-Bold
%%+ font Courier
%%+ font Symbol
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginResource: font Courier-Bold
%%EndResource
%%BeginResource: font Courier
%%EndResource
%%BeginResource: font Symbol
%%EndResource
% character encoding(s)
/cupsEncoding00 [
/.notdef/
/.notdef/
/.notdef/
/.notdef/
/space/
/parenleft/
/zero/one/
/eight/
/at/A/B/C/D/E/F/G
/H/I/J/K/L/M/N/O
/P/Q/R/S/T/U/V/W
/X/Y/Z/
/grave/
/h/i/j/k/l/m/n/o
/p/q/r/s/t/u/v/w
/x/y/z/
/.notdef/
/.notdef/
/.notdef/
/.notdef/
/space/
/dieresis/
/degree/
/cedilla/
/Agrave/
/Egrave/
/Eth/Ntilde/
/Oslash/
/agrave/
/egrave/
/eth/ntilde/
/oslash/
] def
/cupsEncoding01 [
/Amacron/
/Ccircumflex/
/Dcroat/
/Eogonek/
/Gdotaccent/
/Itilde/
/Idotaccent/
/kgreenlandic/
/ldot/Lslash/
/ncaron/
/Ohungarumlaut/
/Rcaron/
/Scaron/
/Utilde/
/Uhungarumlaut/
/Ydieresis/
/uni0180/
/uni0188/
/uni0190/
/uni0198/
/Ohorn/
/uni01A8/
/uhorn/
/uni01B8/
/uni01C0/
/uni01C8/
/uni01D0/
/uni01D8/
/uni01E0/
/uni01E8/
/uni01F0/
/uni01F8/
] def
/cupsEncoding02 [
/uni0200/
/uni0208/
/uni0210/
/Scommaaccent/
/uni0220/
/uni0228/
/uni0230/
/uni0238/
/uni0240/
/uni0248/
/uni0250/
/uni0258/
/uni0260/
/uni0268/
/uni0270/
/uni0278/
/uni0280/
/uni0288/
/uni0290/
/uni0298/
/uni02A0/
/uni02A8/
/uni02B0/
/uni02B8/
/uni02C0/
/uni02C8/
/uni02D0/
/breve/
/uni02E0/
/uni02E8/
/uni02F0/
/uni02F8/
] def
/cupsEncoding03 [
/gravecomb/
/uni0308/
/uni0310/
/uni0318/
/uni0320/
/uni0328/
/uni0330/
/uni0338/
/uni0340/
/uni0348/
/uni0350/
/uni0358/
/uni0360/
/uni0368/
/uni0370/
/uni0378/
/uni0380/
/Epsilontonos/
/iotadieresisto
/Theta/
/Pi/Rho/
/Psi/Omega/
/upsilondieresi
/theta/
/pi/rho/
/psi/omega/
/uni03D0/
/uni03D8/
/uni03E0/
/uni03E8/
/uni03F0/
/uni03F8/
] def
/cupsEncoding04 [
/uni0400/
/afii10057/
/afii10017/
/afii10026/
/afii10034/
/afii10042/
/afii10065/
/afii10074/
/afii10082/
/afii10090/
/uni0450/
/afii10105/
/uni0460/
/uni0468/
/uni0470/
/uni0478/
/uni0480/
/uni0488/
/afii10050/
/uni0498/
/uni04A0/
/uni04A8/
/uni04B0/
/uni04B8/
/uni04C0/
/uni04C8/
/uni04D0/
/uni04D8/
/uni04E0/
/uni04E8/
/uni04F0/
/uni04F8/
] def
/cupsEncoding05 [
/uni0500/
/uni0508/
/uni0510/
/uni0518/
/uni0520/
/uni0528/
/uni0530/
/uni0538/
/uni0540/
/uni0548/
/uni0550/
/uni0558/
/uni0560/
/uni0568/
/uni0570/
/uni0578/
/uni0580/
/uni0588/
/uni0590/
/uni0598/
/uni05A0/
/uni05A8/
/afii57799/
/afii57797/
/afii57842/
/uni05C8/
/afii57664/
/afii57672/
/afii57680/
/afii57688/
/afii57716/
/uni05F8/
] def
/cupsEncoding06 [
/uni1E00/
/uni1E08/
/uni1E10/
/uni1E18/
/uni1E20/
/uni1E28/
/uni1E30/
/uni1E38/
/uni1E40/
/uni1E48/
/uni1E50/
/uni1E58/
/uni1E60/
/uni1E68/
/uni1E70/
/uni1E78/
/Wgrave/
/uni1E88/
/uni1E90/
/uni1E98/
/uni1EA0/
/uni1EA8/
/uni1EB0/
/uni1EB8/
/uni1EC0/
/uni1EC8/
/uni1ED0/
/uni1ED8/
/uni1EE0/
/uni1EE8/
/uni1EF0/
/uni1EF8/
] def
/cupsEncoding07 [
/uni2000/
/uni2008/
/uni2010/
/quoteleft/
/dagger/
/uni2028/
/perthousand/
/uni2038/
/uni2040/
/uni2048/
/uni2050/
/uni2058/
/uni2060/
/uni2068/
/zerosuperior/
/eightsuperior/
/zeroinferior/
/eightinferior/
/uni2090/
/uni2098/
/uni20A0/
/uni20A8/
/uni20B0/
/uni20B8/
/uni20C0/
/uni20C8/
/uni20D0/
/uni20D8/
/uni20E0/
/uni20E8/
/uni20F0/
/uni20F8/
] def
/cupsEncoding08 [
/uni2100/
/uni2108/
/uni2110/
/weierstrass/
/uni2120/
/uni2128/
/uni2130/
/uni2138/
/uni2140/
/uni2148/
/uni2150/
/uni2158/
/uni2160/
/uni2168/
/uni2170/
/uni2178/
/uni2180/
/uni2188/
/arrowleft/
/uni2198/
/uni21A0/
/arrowupdnbse/
/uni21B0/
/uni21B8/
/uni21C0/
/uni21C8/
/arrowdblleft/
/uni21D8/
/uni21E0/
/uni21E8/
/uni21F0/
/uni21F8/
] def
/cupsEncoding09 [
/universal/
/element/
/uni2210/
/uni2218/
/angle/
/logicalor/
/uni2230/
/uni2238/
/uni2240/
/approxequal/
/uni2250/
/uni2258/
/notequal/
/uni2268/
/uni2270/
/uni2278/
/uni2280/
/uni2288/
/uni2290/
/uni2298/
/uni22A0/
/uni22A8/
/uni22B0/
/uni22B8/
/uni22C0/
/uni22C8/
/uni22D0/
/uni22D8/
/uni22E0/
/uni22E8/
/uni22F0/
/uni22F8/
] def
/cupsEncoding0a [
/uni2300/
/uni2308/
/revlogicalnot/
/uni2318/
/integraltp/
/uni2328/
/uni2330/
/uni2338/
/uni2340/
/uni2348/
/uni2350/
/uni2358/
/uni2360/
/uni2368/
/uni2370/
/uni2378/
/uni2380/
/uni2388/
/uni2390/
/uni2398/
/uni23A0/
/uni23A8/
/uni23B0/
/uni23B8/
/uni23C0/
/uni23C8/
/uni23D0/
/uni23D8/
/uni23E0/
/uni23E8/
/uni23F0/
/uni23F8/
] def
% Reencode base fonts
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding00 def
currentdict
end
/cupsBold00 exch definefont /cupsBold00 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding01 def
currentdict
end
/cupsBold01 exch definefont /cupsBold01 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding02 def
currentdict
end
/cupsBold02 exch definefont /cupsBold02 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding03 def
currentdict
end
/cupsBold03 exch definefont /cupsBold03 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding04 def
currentdict
end
/cupsBold04 exch definefont /cupsBold04 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding05 def
currentdict
end
/cupsBold05 exch definefont /cupsBold05 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding06 def
currentdict
end
/cupsBold06 exch definefont /cupsBold06 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding07 def
currentdict
end
/cupsBold07 exch definefont /cupsBold07 exch def
/Courier-Bold findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding08 def
currentdict
end
/cupsBold08 exch definefont /cupsBold08 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding09 def
currentdict
end
/cupsBold09 exch definefont /cupsBold09 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding0a def
currentdict
end
/cupsBold0a exch definefont /cupsBold0a exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding00 def
currentdict
end
/cupsNormal00 exch definefont /cupsNormal00 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding01 def
currentdict
end
/cupsNormal01 exch definefont /cupsNormal01 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding02 def
currentdict
end
/cupsNormal02 exch definefont /cupsNormal02 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding03 def
currentdict
end
/cupsNormal03 exch definefont /cupsNormal03 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding04 def
currentdict
end
/cupsNormal04 exch definefont /cupsNormal04 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding05 def
currentdict
end
/cupsNormal05 exch definefont /cupsNormal05 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding06 def
currentdict
end
/cupsNormal06 exch definefont /cupsNormal06 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding07 def
currentdict
end
/cupsNormal07 exch definefont /cupsNormal07 exch def
/Courier findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding08 def
currentdict
end
/cupsNormal08 exch definefont /cupsNormal08 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding09 def
currentdict
end
/cupsNormal09 exch definefont /cupsNormal09 exch def
/Symbol findfont
dup length 1 add dict begin
{ 1 index /FID ne { def } { pop pop } ifelse } forall
/Encoding cupsEncoding0a def
currentdict
end
/cupsNormal0a exch definefont /cupsNormal0a exch def
% Create composite fonts...
8 dict begin
/FontType 0 def/FontMatrix[1.0 0 0 1.0 0 0]def/FMapType 2 def/Encoding[
0 1 2 3 4 5 6 7 8 9 10]def/FDepVector[
cupsBold00 cupsBold01 cupsBold02 cupsBold03
cupsBold04 cupsBold05 cupsBold06 cupsBold07
cupsBold08 cupsBold09 cupsBold0a]def currentdict end
/cupsBold exch definefont pop
8 dict begin
/FontType 0 def/FontMatrix[1.0 0 0 1.0 0 0]def/FMapType 2 def/Encoding[
0 1 2 3 4 5 6 7 8 9 10]def/FDepVector[
cupsNormal00 cupsNormal01 cupsNormal02 cupsNormal03
cupsNormal04 cupsNormal05 cupsNormal06 cupsNormal07
cupsNormal08 cupsNormal09 cupsNormal0a]def currentdict end
/cupsNormal exch definefont pop
%%BeginResource: procset texttops 1.1 0
% Define fonts
/FN /cupsNormal findfont [12.000 0 0 11.333 0 0] makefont def
/FB /cupsBold findfont [12.000 0 0 11.333 0 0] makefont def
% Common procedures
/N { FN setfont moveto } bind def
/B { FB setfont moveto } bind def
/U { gsave 0.5 setlinewidth 0 -1.133 rmoveto 0 rlineto stroke grestore } bind def
/S { show } bind def
%%EndResource
%%EndProlog
%%BeginSetup
% Disable CTRL-D as an end-of-file marker...
userdict dup(\004)cvn{}put (\004\004)cvn{}put
[{
%%BeginFeature: *PageRegion A4
%% FoomaticRIPOpti
%%EndFeature
} stopped cleartomark
[{
%%BeginFeature: *PrintoutMode Normal
%% FoomaticRIPOpti
%%EndFeature
} stopped cleartomark
[{
%%BeginFeature: *InputSlot Default
%% FoomaticRIPOpti
%%EndFeature
} stopped cleartomark
[{
%%BeginFeature: *Quality FromPrintoutMode
%% FoomaticRIPOpti
%%EndFeature
} stopped cleartomark
[{
%%BeginFeature: *Duplex None
%% FoomaticRIPOpti
%%EndFeature
} stopped cleartomark
% x y w h ESPrc - Clip to a rectangle.
userdict/
{{newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto
neg 0 rlineto closepath clip newpath}bind}ifelse put
% x y w h ESPrf - Fill a rectangle.
userdict/
{{gsave newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto
neg 0 rlineto closepath fill grestore}
% x y w h ESPrs - Stroke a rectangle.
userdict/
{{gsave newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto
neg 0 rlineto closepath stroke grestore}
userdict/
[{
%% Code for writing CUPS accounting tags on standard error
/cupsPSLevel2 % Determine whether we can do PostScript level 2 or newer
systemdict/
known{get exec}{pop pop 1}ifelse 2 ge
def
cupsPSLevel2
{ % in case of level 2 or higher
currentglobal true setglobal % define a dictioary foomaticDict
globaldict begin % in global VM and establish a
/foomaticDict % pages count key there
<<
/PhysPages 0
>>def
end
setglobal
}if
/cupsGetNumCopies { % Read the number of Copies requested for the current
% page
cupsPSLevel2
{
% PS Level 2+: Get number of copies from Page Device dictionary
currentpagedevice /NumCopies get
}
{
% PS Level 1: Number of copies not in Page Device dictionary
null
}
ifelse
% Check whether the number is defined, if it is "null" use #copies
% instead
dup null eq {
pop #copies
}
if
% Check whether the number is defined now, if it is still "null" use 1
% instead
dup null eq {
pop 1
} if
} bind def
/cupsWrite { % write a string onto standard error
(%stderr) (w) file
exch writestring
} bind def
/cupsFlush % flush standard error to make it sort of unbuffered
{
(%stderr)(w)file flushfile
}bind def
cupsPSLevel2
{ % In language level 2, we try to do something reasonable
<<
/EndPage
[ % start the array that becomes the procedure
currentpa
{get} % get the existing EndPage procedure
{pop pop {exch pop 2 ne}bind}ifelse % there is none, define the default
/exec load % make sure it will be executed, whatever it is
/dup load % duplicate the result value
{ % true: a sheet gets printed, do accounting
PhysPages 1 add % count the sheets printed (including this one)
dup /PhysPages exch def % and save the value
end % leave our dict
exch setglobal % return to previous VM
(PAGE: )cupsWrite % assemble and print the accounting string ...
16 string cvs cupsWrite % ... the sheet count ...
( )cupsWrite % ... a space ...
16 string cvs cupsWrite % ...
cupsFlush
}/if load
% false: current page gets discarded; do nothing
]cvx bind % make the array executable and apply bind
>>setpagedevice
}
{
% In language level 1, we do no accounting currently, as there is no global VM
% the contents of which are undesturbed by save and restore.
% If we may be sure that showpage never gets called inside a page related save / restore pair
% we might implement an hack with showpage similar to the one above.
}ifelse
} stopped cleartomark
%%EndSetup
%%Page: 1 1
%%PageBoundingBox: 0 0 595 842
%%BeginPageSetup
%%EndPageSetup
gsave
18 817.484 N<00480065006c0
grestore
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 595 842
%%EOF
so, u see where there error comes from ?
There is an other printer installed here (canon ip 2200) and this orinter is still working.
|
Revision history for this message
|
#11 |
well, in YAST there is for HP Printer:
HP
LaserJet M1522 MFP / HP_LaserJet_
Freigegeben
Verbunden als hp:/net/
Mit SpoolHP_
A look in cups (http://
hp:/net/
Beispiele:
http://
http://
ipp:
ipp:
lpd:
socket:
socket:
so could this work with hp:/net/....
?
|
Revision history for this message
|
#12 |
Please use attachments for such long stuff.
This is the interesting error message:
unable to open PrintContext object err=16
ESP Ghostscript 8.15.3: Can't start ijs server "hpijs"
**** Unable to open the initial device, quitting.
strings /usr/bin/hpijs | grep PrintContextt
shows that the "unable to open PrintContext object"
message comes directly from /usr/bin/hpijs.
I have no idea why hpijs fails in your case.
Perhaps a real bug in hpijs for your printer
or perhaps your HPLIP installytion is somehow broken.
Did you self-complie HPLIP at any time on this system?
Did you install other/older HPLIP versions before on this
system and if yes, which versions?
Did you use the HPLIP installer or only RPM packages?
Do
su -
(with the '-' !) to log in cleanly as root and do
type -a hpijs
and note its output, then do
su - lp
to switch to user lp and do
type -a hpijs
In both cases you should only get
hpijs is /usr/bin/hpijs
hpijs is /usr/bin/X11/hpijs
(the latter comes from the link '/usr/bin/X11 -> .')
If there is any other hpijs, delete it.
It is a leftover from whatever previous broken
HPLIP installation which does not work together
with the current HPLIP installation.
|
Revision history for this message
|
#13 |
well, first installation was from repositore opensuse 10.3 ( hplip version 2.7.7)
i deinstalled it by using yast and installed hplip in version 2.8.4 by using the hplip**.run package. after you are answering on german ML opensuse i deinstalled this package like it is written here : http://
then i add you're version from "...home:/jmeix" as a repositorie and installed it again. in BOTH version's (as run-package and from repositorie) there is the dbus-error.
But i have to use the 2.8.4 version to work with the 1120n MFP Printer.
linux-work1:~ # type -a hpijs
hpijs is /usr/bin/hpijs
hpijs is /usr/bin/X11/hpijs
linux-work1:~ # su - lp
lp@linux-work1:~> type -a hpijs
hpijs is /usr/bin/hpijs
hpijs is /usr/bin/X11/hpijs
lp@linux-work1:~>
so this looks fine .
|
Revision history for this message
|
#14 |
And I must give up and leave it to the HP people
to try to find the reason for the
unable to open PrintContext object err=16
error of /usr/bin/hpijs in your particular case
because I don't understand the details
in the prnt/hpijs/
|
Revision history for this message
|
#15 |
okay, so is this maybe only a problem with this printer ? or are there more printers affected ?
|
Revision history for this message
|
#16 |
I am not sure but "err=16" might be a UNSUPPORTED_PRINTER
error (according to prnt/hpijs/
If I am right,
you know that your LaserJet m1120n MFP
requires a proprietary module to work?
See
http://
Did you use hp-setup to install it?
This looks suspicious in your log:
PPD file: /etc/cups/
ATTR file:
Printer model: HP LaserJet M1522 MFP, hpijs 2.8.4
The model names do not match!
What did you do to set it up?
Did you select another model?
E.g. the "HP LaserJet M1522 MFP" beacsue it looks similar?
If yes, this is totally wrong for your moel.
The 1522 is a true PostScript printer while yours
is a weak ZJStream piece of hardware crap, see
https:/
for my experience with such hardware crap.
Use "hp-setup".
Let it autodetect your model.
Let it download and install the proprietary module.
Make sure the whole "hp-setup" setup works well
and then nevertheless hope for the best...
|
Revision history for this message
|
#17 |
well, i read the first link iwth "proprietary" driver but as i run hp-setup he scans my network and detects automaticly the printer and downloaded the modul.
the 1522 Modell was also detected automaticly by hp-setup.
well, is the 1522 model does not work, which driver should work ? on this machine i only need printing service. scaning isn't necessary. There are some other computers who could do this job.
i will run hp-setup again and detect the printer again and maybe i can take another driver...
btw. everything works fine from beginning the installation of hplip from your source to configuring the printer with hp-setup . but the systray won't start as single app. toolbox starts fine and shows me status and other settings...
|
Revision history for this message
|
#18 |
Interesting info!
Now I am almost sure that only the experts at HP
who have internal knowledge both about the
HPLIP software and the various printer hardware
could help further.
|
Revision history for this message
|
#19 |
Could a HP expert please have a look
at this issue.
|
Revision history for this message
|
#20 |
i delete the "old "settings for the printer and add them by using hp-setup:
he will automaticly detect the printer, then i have to download plugins, and this plugins is the 1522 Modell.
And still the same: i could see status of the printer but printing jobs aren't possible.
Is somebody from HP here reading ?
Is it possible, that for printingjobs some "wrong" driver would be used cause only some of the printer have the lower n for NETWORKING support behind the modell. the 1522 printer hasn't it. ?
|
Revision history for this message
|
#21 |
is it possible that the driver couldn't connect to the new firmware ?
firmware datecode ist: 20080228 .
but all windows XP clients work perfect with the printer, also scanning and copying...
|
Revision history for this message
|
#22 |
Please run:
/usr/lib/
and post the output. I'm not sure what's going on..but I think there is a problem with the install.
A
|
Revision history for this message
|
#23 |
/usr/lib/
HP Linux Imaging and Printing System
CUPS Backend 2.8.4
(c) 2003-2008 Copyright Hewlett-Packard Development Company, LP
|
Revision history for this message
|
#24 |
The backend is the correct version. We've tested on Suse 10.3 and haven't seen this problem..I'm thinking there is some sort of hplip install problem.
Please remove hplip using YaST, then uninstall hplip 2.8.3 by running:
make uninstall
from within the hplip-2.8.4 install directory. Or you can run
su -c "rm -rf /usr/share/hplip"
Then reinstall hplip by using the automatic installer.
Hope this helps.
A
|
Revision history for this message
|
#25 |
i did it.
installed via yast using jmeix repositorie.
running on console as root: hp-setup and installed the printer. he were found imediately. downloading automaticly driver. select driver and eveything was okay.
starting as user "hp-systray"
message is :
hp-systray
HP Linux Imaging and Printing System (ver. 2.8.4)
System Tray Status Service ver. 0.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: dbus failed to load (python-dbus ver. 0.80+ required). Exiting...
Getötet
what else ?
|
Revision history for this message
|
#26 |
We've tested the latest hplip release 2.8.4 on Suse 10.3 and it's working correctly. We haven't tested johannes packages...if possible try uninstalling the other hplip rpm and install hplip 2.8.4 from source and see if you have better results.
Thanks.
A
|
Revision history for this message
|
#27 |
well. it doesn't work.
look here (printer was found immediately, download driver 1522, and installed, but testpage wasn't printed.
arbeitsaccount@
Creating directory hplip-2.8.4
Verifying archive integrity... All good.
Uncompressing HPLIP 2.8.4 Self Extracting Archive.
HP Linux Imaging and Printing System (ver. 2.8.4)
HPLIP Installer ver. 3.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_
|
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to chose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, w=web installer, q=quit) : a
Initializing. Please wait...
INTRODUCTION
------------
This installer will install HPLIP version 2.8.4 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
-------
Distro appears to be SUSE Linux 10.3.
Is "SUSE Linux 10.3" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
SELECT HPLIP OPTIONS
-------
Would you like to enable support for parallel (LPT:) connected printers? (y=yes, n=no*, q=quit) ? n
ENTER ROOT/SUPERUSER PASSWORD
-------
Please enter the root/superuser password:
Password accepted
INSTALLATION NOTES
------------------
Please be sure to disable the CD repositories in YaST.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
RUNNING PRE-INSTALL COMMANDS
-------
INSTALL MISSING OPTIONAL DEPENDENCIES
-------
warning: There are 1 missing OPTIONAL dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'fax': reportlab (Reportlab - PDF library for Python)
warning: This installer cannot install 'reportlab' for your distro/OS and/or version.
PRE-BUILD COMMANDS
------------------
BUILD AND INSTALL
-----------------
Running './configure --enable-
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'su -c "make install"'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
RESTART OR RE-PLUG IS REQUIRED
-------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer,
you will need to either restart your PC or unplug and re-plug in your printer (USB cable only). If you choose
to restart, run this command after restarting: su -c "hp-setup" (Note: If you are using a parallel connection,
you will have to restart your PC. If you are using network/wireless, you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : i
i
PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
arbeitsaccount@
HP Linux Imaging and Printing System (ver. 2.8.4)
System Tray Status Service ver. 0.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: dbus failed to load (python-dbus ver. 0.80+ required). Exiting...
Getötet
same ase befor. dbus....
|
Revision history for this message
|
#28 |
but why allways be used a driver for Modell 1522 ?
|
Revision history for this message
|
#29 |
Have a look at the message "error: dbus failed to load"
Hartmut
|
Revision history for this message
|
#30 |
Try installing the package:
python-gobject2
and this should resolve it. This will be fixed in the next release.
A
|
Revision history for this message
|
#31 |
okay, i try johannes package now and python-gobject2 has solved the dbus-error.
But no pages will be print out: in status view is shown that the testpage ist printed out succesfully and other prints (openoffice eg) were shown too that they are printed succesfully. but no pages came out.
shall i try the original package again ?
i prefer johannes package.
|
Revision history for this message
|
#32 |
i set loglevel to info in cups.conf and try a testpage:
I [29/Apr/
I [29/Apr/
E [29/Apr/
I [29/Apr/
I [29/Apr/
I [29/Apr/
I [29/Apr/
I [29/Apr/
I [29/Apr/
I [29/Apr/
E [29/Apr/
I [29/Apr/
what does status 3 mean ?
|
Revision history for this message
|
#33 |
Please put cups into debug mode and view the log --then try to print again.
Look here: (issue 2)
http://
Aaron
|
Revision history for this message
|
#34 |
Hi, i solved my problem!!
I installed hplip from Johannes package on our Server (opensuse 103).
run hp-setup and testpage was printed out immediatly. Then i configured cups to accept from the Suse 103 Workstation and this will work.
As i installed hplip on our Server dependencies will be solved automaticly (python-gobject2, dbus-python etc)
Thanks for help to Aaron and Johannes.
regards Sebastian
