MFP 1217nfw wireless installation issue

Hi,

Please follow following things and check if issue gets resolved.
=> Download and install the latest HPLIP release from
http://hplipopensource.com/hplip-web/install/install/index.html (automatic installer) or
http://hplipopensource.com/hplip-web/install/manual/index.html (manual installation, if automatic installer does not work)

=> Reconfigure print queue with the commands in the terminal mentioned below.
       => system-config-printer (remove all print queues)
      => su -c "hp-plugin"
             or
      => sudo hp-plugin (This will download right plugin)
       => hp-setup (It should not be run in a root mode. This command is adding print queue, select wifi option. make sure you select ppd name having "-ps" or "hpcups" substring)
=>Try printing now.

If problem does not get solved then please run following command to capture the logs and send the logs.

$su -c "hp-logcapture"

Hi Sanjay,

in mean time I did a clean install of Ubuntu 12.10, but it seems that problem persists. I downloaded and installed latest HPLIP release following your instructions. Automatic installation did the job without showing any errors but do note that even command hp-check reports HPLIP version 3.13.3 when I run dpkg -l hplip command I get information that installed version is 3.12.6 and at the front there is "rc" instead of "ii" how it should be by this guide http://hplipopensource.com/node/306

chaghaboo@el-chupacabra:~$ dpkg -l hplip
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==============-============-============-=================================
rc hplip 3.12.6-3ubun amd64 HP Linux Printing and Imaging Sys

When run "sudo hp-setup" I get three options:
1. Download and install the plug-in from an authorized HP server (recommended)
2. Select and install existing local copy of the plug-in file (advanced)
3. Skip the installation of the plug-in (not recommended)
I choose first option, and in next step I get Driver plug-in licence agreement to agree with and in the end message "Plug-in installation successful".

When I run "hp-setup" window titled "Device Discover" pops up to choose connection type, I choose Wireless/802.11 (requires a temporary usb connection and is only available for selected devices) and click Next.

After that new window pops up titled "Wireless (Wifi/802.11) configuration" asking me to connect printer via usb cable what I do and click Next.

Another window opens titled "Select from detected wireless capable devices" in which my printer is listed. I select printer and click Next.

In next windows titled "Find and select a wireless network" I choose my Wifi network and in next window enter wireless security key and after I click on "Connect" small windows pops up saying that printer is connecting to wireless network showing bar with percentages, and after that I window titled "Wireless configuration results" with error message: Your printer has not been connected to wireless network. A valid connection to wireless network can take up to 2 minutes. The window will automatically refresh every 20 seconds. If printer fails to connect within a reasonable time there may be problem with your configuration.

In next messages there are hp-setup, hp-check, and hp-logcapture outputs. Hope this might give some clue.

HP-SETUP

chaghaboo@el-chupacabra:~$ hp-setup

HP Linux Imaging and Printing System (ver. 3.13.3)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

warning: Wifi Adapter turn ON request Failed. ResponseCode=405 AdaptorId=/IoMgmt/Adapters/wifi0 AdaptorName=wifi0. Trying another interface
GET /IoMgmt/Adapters/wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
warning: Request failed with Response code 404. HostName not found.
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
warning: Request failed with Response code 404. HostName not found.
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
warning: Request failed with Response code 404. HostName not found.
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
warning: Request failed with Response code 404. HostName not found.
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

error: Unicode Error
warning: Request failed with Response code 404. HostName not found.

HP-CHECK

chaghaboo@el-chupacabra:~$ hp-check
Saving output in log file: /home/chaghaboo/hp-check.log

HP Linux Imaging and Printing System (ver. 3.13.3)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
    OK
    MISSING - Missing Dependency or Permission or Plug-in
    INCOMPAT - Incompatible dependency-version or Plugin-version

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.5.0-26-generic #42-Ubuntu SMP Fri Mar 8 23:18:20 UTC 2013 GNU/Linux
 Host: el-chupacabra
 Proc: 3.5.0-26-generic #42-Ubuntu SMP Fri Mar 8 23:18:20 UTC 2013 GNU/Linux
 Distribution: ubuntu 12.10

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.13.3
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 12.10 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.13.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.13.3
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.13.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.13.3

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1363871672
pending_upgrade_time = 0
latest_available_version = 3.13.3

[installation]
date_time = 03/21/2013 15:21:07
version = 3.13.3

 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

--------------------------
| External Dependencies |
--------------------------

 gs Ghostscript REQUIRED 7.05 9.06 OK -
 network Network-wget OPTIONAL - 1.13.4 OK -
 dbus DBus REQUIRED - 1.6.4 OK -
 scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
 policykit Admin-Policy-framework OPTIONAL - 0.104 OK -
 xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
 cups CUPS REQUIRED 1.1 1.6.1 OK 'CUPS Scheduler is running'

-------------------------
| General Dependencies |
-------------------------

 reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK -
 libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
 pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
 pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.3 OK -
 libjpeg JPEG-Lib REQUIRED - - OK -
 libpthread POSIX-Threads-Lib REQUIRED - 2.15 OK -
 python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK -
 python-devel Python-SDK REQUIRED 2.2 2.7.3 OK -
 pyqt4 Python-Qt4 REQUIRED 4.0 4.9.3 OK -
 cups-devel CUPS-SDK REQUIRED - 1.6.1 OK -
 sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
 libusb USB-Lib REQUIRED - 1.0 OK -
 sane Scan-Lib REQUIRED - 1.0.23 OK -
 cups-image CUPS-Image-Lib REQUIRED - 1.6.1 OK -
 libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 OK -
 python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
 python-notify Desktop-notifications OPTIONAL - - OK -

------------------------------
| Compile Time Dependencies |
------------------------------

 gcc gcc-Compiler REQUIRED - 4.7.2 OK -
 libtool Build-tools REQUIRED - 2.4.2 OK -
 make GNU-Build-tools REQUIRED 3.0 3.81 OK -

----------------------
| Python Extentions |
----------------------

 cupsext CUPS-Extension REQUIRED - 3.13.3 OK -
 pcardext PhotoCard-Extension REQUIRED - 3.13.3 OK -
 hpmudext IO-Extension REQUIRED - 3.13.3 OK -

-----------------------
| Scan Configuration |
-----------------------

 hpaio HPLIP-SANE-Backend REQUIRED - 3.13.3 OK 'hpaio found in /etc/sane.d/dll.conf'
 scanext Scan-SANE-Extension REQUIRED - 3.13.3 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1217nfw_MFP all-in-one

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------- --------------------------------
  hp:/usb/HP_LaserJet_Professional HP LaserJet Professional
  _M1217nfw_MFP?serial=000000000T2 M1217nfw MFP
  20PKZPR1a

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP_LaserJet_Professional_M1217nfw_MFP
-------------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a
PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1217nfw_MFP.ppd
PPD Description: HP LaserJet Professional m1217nfw MFP, hpcups 3.13.3, requires proprietary plugin
Printer status: printer HP_LaserJet_Professional_M1217nfw_MFP is idle. enabled since Thu 21 Mar 2013 02:27:08 PM CET
Required plug-in status: Installed
Communication status: Good

HP_LaserJet_Professional_M1217nfw_MFP_fax
-----------------------------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a
PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1217nfw_MFP_fax.ppd
PPD Description: HP Fax3 hpcups
Printer status: printer HP_LaserJet_Professional_M1217nfw_MFP_fax is idle. enabled since Thu 21 Mar 2013 02:27:08 PM CET
Required plug-in status: Installed
Communication status: Good

--------------
| PERMISSION |
--------------

groups user-groups Required - - OK chaghaboo adm lp cdrom sudo dip plugdev lpadmin sambashare

USB HP_LaserJet_Professional_M1217nfw_MFP Required - - OK Node:'/dev/bus/usb/003/003' Perm:' root lp rw- rw- rw- rw- r--'
No errors or warnings.

Done.

HP-LOGCAPTURE

I can not provide this as it offers me to capture log for printer tasks (printing, scanning, faxing) and my printer is still not installed to work over Wifi network.

Hi,

Please follow below steps to setup.

1) run hp-setup -g
$ hp-setup -g

--> select 3rd option (i.e wireless/802.11) and follow navigations
--> please ignore unicode warnings and error (this will be fixed in next HPLIP release)
--> Once navigation completes, shows IP address on UI.

2) run hp-setup with above IP address
$ hp-setup <IP address>

If you still found the problem, please post above commands output here.

Thanks & Regards,
Amarnath

Hi Amarnath,

still no luck. Same problem occurred during step 1 you proposed. Below is hp-setup -g output, it doesn't start from beginning as it seems it's very long so this is all I got in terminal:

        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 5
          Transfer Type Isochronous
          Synch Type Asynchronous
          Usage Type Data
        wMaxPacketSize 0x0100 1x 256 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 3
      bNumEndpoints 1
      bInterfaceClass 14 Video
      bInterfaceSubClass 2 Video Streaming
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 5
          Transfer Type Isochronous
          Synch Type Asynchronous
          Usage Type Data
        wMaxPacketSize 0x0320 1x 800 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 4
      bNumEndpoints 1
      bInterfaceClass 14 Video
      bInterfaceSubClass 2 Video Streaming
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 5
          Transfer Type Isochronous
          Synch Type Asynchronous
          Usage Type Data
        wMaxPacketSize 0x0b20 2x 800 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 5
      bNumEndpoints 1
      bInterfaceClass 14 Video
      bInterfaceSubClass 2 Video Streaming
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 5
          Transfer Type Isochronous
          Synch Type Asynchronous
          Usage Type Data
        wMaxPacketSize 0x1320 3x 800 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 6
      bNumEndpoints 1
      bInterfaceClass 14 Video
      bInterfaceSubClass 2 Video Streaming
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 5
          Transfer Type Isochronous
          Synch Type Asynchronous
          Usage Type Data
        wMaxPacketSize 0x1400 3x 1024 bytes
        bInterval 1

hp-setup[3126]: debug: No Smart Install Device found
hp-setup[3126]: debug: Probing bus: usb
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: Cache miss: hp_laserjet_professional_m1217nfw_mfp
hp-setup[3126]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-setup[3126]: debug: Searching for section [hp_laserjet_professional_m1217nfw_mfp] in file /usr/share/hplip/data/models/models.dat
hp-setup[3126]: debug: Found section [hp_laserjet_professional_m1217nfw_mfp] in file /usr/share/hplip/data/models/models.dat
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: Device URI: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a
hp-setup[3126]: debug: Printer: None
hp-setup[3126]: debug: Connecting to com.hplip.StatusService (try #1)...
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: URI: backend=hp, is_hp=True, bus=usb, model=HP_LaserJet_Professional_M1217nfw_MFP, serial=000000000T220PKZPR1a, dev=, host=, port=1
hp-setup[3126]: debug: Model/UI model: HP_LaserJet_Professional_M1217nfw_MFP/HP LaserJet Professional m1217nfw MFP
hp-setup[3126]: debug: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a: back_end:hp is_hp:True bus:usb model:HP_LaserJet_Professional_M1217nfw_MFP serial:000000000T220PKZPR1a dev_file: host: zc: port:1
hp-setup[3126]: debug: Re-reading CUPS printer queue information.
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening device: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a (not for printing)
hp-setup[3126]: debug: I/O mode=1
hp-setup[3126]: debug: device-id=1
hp-setup[3126]: debug: Opened device: hp (backend=hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a, is_hp=True, bus=usb, model=HP_LaserJet_Professional_M1217nfw_MFP, dev=, serial=000000000T220PKZPR1a, host=, port=1)
hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Opening HP-EWS-LEDM channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Opening HP-MARVELL-EWS channel...
hp-setup[3126]: debug: channel-id=25
hp-setup[3126]: debug: Writing 131 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 7 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 7 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
hp-setup[3126]: debug: Missing response key: 'io:adapter-map:resourcenode-map:resourcelink-dd:resourceuri'
hp-setup[3126]: debug: Turning on wireless radio...
hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Writing 430 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 90 of 1000 bytes complete.
hp-setup[3126]: debug: Saved 90 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
warning: Wifi Adapter turn ON request Failed. ResponseCode=405 AdaptorId=/IoMgmt/Adapters/wifi0 AdaptorName=wifi0. Trying another interface
hp-setup[3126]: debug: Writing 530 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 121 of 1000 bytes complete.
hp-setup[3126]: debug: Saved 121 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
hp-setup[3126]: debug: Wifi Adapter turn ON request is Success. AdaptorId=/IoMgmt/Adapters/wifi0 AdaptorName=wifi0
hp-setup[3126]: debug: Adaptor ID: /IoMgmt/Adapters/wifi0
hp-setup[3126]: debug: Adaptor name: wifi0
hp-setup[3126]: debug: Adaptor state:
hp-setup[3126]: debug: Adaptor presence:
GET /IoMgmt/Adapters/wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 150 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 296 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 296 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
hp-setup[3126]: debug: Closing device...
hp-setup[3126]: debug: Closing HP-MARVELL-EWS channel...
hp-setup[3126]: debug: Closing HP-EWS-LEDM channel...
hp-setup[3126]: debug: Result-code = 0
hp-setup[3126]: debug: 0: Name=CasaN, strength=5, security=WEP, mode=infrastructure
hp-setup[3126]: debug: 1: Name=Minja, strength=1, security=WPA2, mode=infrastructure
hp-setup[3126]: debug: 2: Name=SezamPro, strength=1, security=WPA_PSK, mode=infrastructure
hp-setup[3126]: debug: Selected network SSID: CasaN
hp-setup[3126]: debug: Security: WEP
hp-setup[3126]: debug: Mode: infrastructure
hp-setup[3126]: debug: Signal strength: 5
GET /IoMgmt/Adapters/wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening device: hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a (not for printing)
hp-setup[3126]: debug: I/O mode=1
hp-setup[3126]: debug: device-id=1
hp-setup[3126]: debug: Opened device: hp (backend=hp:/usb/HP_LaserJet_Professional_M1217nfw_MFP?serial=000000000T220PKZPR1a, is_hp=True, bus=usb, model=HP_LaserJet_Professional_M1217nfw_MFP, dev=, serial=000000000T220PKZPR1a, host=, port=1)
hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Opening HP-EWS-LEDM channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Opening HP-MARVELL-EWS channel...
hp-setup[3126]: debug: channel-id=25
hp-setup[3126]: debug: Writing 153 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 311 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 311 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
error: Unicode Error
hp-setup[3126]: debug: Missing response key: 'io:profile-io:adapterprofile-io:wifiprofile-wifi:communicationmode'
hp-setup[3126]: debug: Crypto algorithm:
hp-setup[3126]: debug: Crypto mode:
hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Writing 1146 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 65 of 1000 bytes complete.
hp-setup[3126]: debug: Saved 65 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1000, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 147 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 75 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 75 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
error: Unicode Error
GET /IoMgmt/Adapters/wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 147 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 75 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 75 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
error: Unicode Error
GET /DevMgmt/IOConfigDyn.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 139 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 504 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 504 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
GET /IoMgmt/Adapters/wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 150 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 41 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 41 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
GET /IoMgmt/Adapters/wifi0/WifiNetworks/SSID=CasaN HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 161 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Full read complete.
hp-setup[3126]: debug: Saved 1024 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 279 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 279 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=10)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 135 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 63 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 63 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
error: Unicode Error
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0

hp-setup[3126]: debug: Opening HP-LEDM-SCAN channel...
hp-setup[3126]: debug: channel-id=-1
hp-setup[3126]: debug: Closing HP-LEDM-SCAN channel...
hp-setup[3126]: debug: Writing 135 bytes to channel 25 (device-id=1)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=0
hp-setup[3126]: debug: Allowed short read of 63 of 1024 bytes complete.
hp-setup[3126]: debug: Saved 63 total bytes to stream.
hp-setup[3126]: debug: Reading channel 25 (device-id=1, bytes_to_read=1024, allow_short=True, timeout=5)...
hp-setup[3126]: debug: Result code=49
hp-setup[3126]: debug: I/O timeout
hp-setup[3126]: debug: Saved 0 total bytes to stream.
error: Unicode Error
warning: Request failed with Response code 404. HostName not found.
hp-setup[3126]: debug: Closing device...
hp-setup[3126]: debug: Closing HP-MARVELL-EWS channel...
hp-setup[3126]: debug: Closing HP-EWS-LEDM channel...
hp-setup[3126]: debug: Result-code = 0

Done.

Hi,

If network cable is connect to the printer, please remove Ethernet cable and try this.

If still not working, please setup wifi using Printer front panel. Once setup is completed, panel shows IP address and run hp-setup using this IP address.

Thanks & Regards,
Amarnath

Hi Amarnath,

as my Wifi router is not WPS enabled, can I install printer using some computer with Windows OS, just to make it retrieve IP address and then use hp-setup using that IP address to make it available on my Linux laptop?

Thanks and best regards