Xsane Can't find scanner HP 4620 Office Jet
I open Xsane and get the error message "Failed to create file: Permission denied" . I then close the error box out and Xsane tries to find my scanner but can't.
I am runing Linux Mint 13 "KDE" Maya
I tried to use the hp-setup to set my printer up but it failed every time to see my device connected to the usb port. I had to use the printer setup in the system settings to get the printer to work and it will work over the network and usb. Something is "broken" some where I need help hunting it down.
I ran sudo hp-check -r and this what I got:
HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package
(.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies
installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both
of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux realfuzion-H5850 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Distribution:
linuxmint 13
Checking Python version...
OK, version 2.7.3 installed
Checking PyQt 4.x version...
OK, version 4.9.1 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.5.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0
-------
| RUNTIME DEPENDENCIES |
-------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.2
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Officejet_
-------
Type: Unknown
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP Officejet 4500 k710, hpcups 3.12.2
Printer status: printer Officejet_
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
---------------
| USER GROUPS |
---------------
root
error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.
-----------
| SUMMARY |
-----------
error: 1 error or warning.
Please refer to the installation instructions at:
http://
Done.
Please Help me I am a new linux user and getting this printer to scan is my last step to being done with windows. :) So What do I do to fix my problem?
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Can you help with this problem?
Provide an answer of your own, or ask David Paulson for more information if necessary.
