Printer mechanism moves, but doesn't print hppsc1210
Whenever I attempt to print something the printer mechanism moves, that is the paper feeds through, the ink cartridge moves from left to right as if it is printing something. The ink fails to move from the print cartridge onto the paper.
It doesn't appear to be an issue of ink, because I have managed to photo copy a paper (via the printer) and it prints out correctly.
Any help would be appreciated.
The below is the outcome of hp-check -t
Thank you.
[connie@paulspc1 ~]$ hp-check -t
HP Linux Imaging and Printing System (ver. 3.10.9)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux paulspc1 2.6.32-
Distribution:
centos 6.2
Checking Python version...
OK, version 2.6.6 installed
Checking PyQt 4.x version...
OK, version 4.6.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.2
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.10.9 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.10.9
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/
[commands]
scan =
[installation]
version = 3.10.9.11
date_time = 01/01/2012 21:33:15
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
Y42AG71455H
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
psc_1200
--------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP PSC 1200 Series, hpcups 3.10.9
Printer status: printer psc_1200 is idle. enabled since Wed 28 Dec 2011 09:35:03 AM EST
HP Linux Imaging and Printing System (ver. 3.10.9)
System Tray Status Service ver. 2.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.
Checking output of 'scanimage -L'...
|/usr/lib/
set_interacti
device `hpaio:
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x2f11 at 003:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/003/002
# owner: root
# group: lp
user::rw-
user:connie:rw-
group::rw-
group:lp:rw-
mask::rw-
other::r--
---------------
| USER GROUPS |
---------------
connie sys lp
-----------
| SUMMARY |
-----------
error: 10 errors and/or warnings.
Please refer to the installation instructions at:
http://
Done.
[connie@paulspc1 ~]$
HP Linux Imaging and Printing System (ver. 3.10.9)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Amarnath Chitumalla
- Solved:
- Last query:
- Last reply: