HPLIP

Fedora 8 x86_64, LaserJet 1020, HPLIP 2.7.10, io/hpmud/musb.c 677: invalid device_status: Connection timed out

Asked by DeathFalconZero on 2007-11-20

########################################
NOTE: I solved my original problem after I had typed it up but before I submitted it.
I'm submitting it anyway in case it might help someone else.
The printer works if I download the firmware each time I restart the computer.
I've been using the /usr/bin/hp-toolbox to do this.
ANOTHER QUESTION: If I just place the command "/usr/bin/hp-firmware" in one of the startup scripts should that do the trick?
Thanks again.
#########################################

Hello,
Clean install of Fedora 8 x86_64. Printer type HP LaserJet 1020.
Installed HPLIP 2.7.10 from tarball yesterday.
Last night printer worked OK. Have the HP Printer Test Page in front of me.
After powering everything down last night and back up today, it won't print.
Made no other changes.
When I try to print test page from the CUPS web page it looks OK with print job info appearing at bottom of web page.
After 6 seconds "printmode mismatch with pen, tray, etc" appears at the top of the web page.
After 30 seconds that message disappears along with the print job info from the bottom of the web page.
Click on the "Show Completed Jobs" button will show the test page as completed.
During this time the printer has not blinked, clicked, printed or made any kind of a sound.

Help! The fact that it worked last night and not now is the real frustrating part.

/var/log/messages: (from two different printing attempts)
Nov 20 15:32:35 blackbox HP_LaserJet_1020?serial=JL312PA:last message repeated 5 times
Nov 20 15:32:35 blackbox hpijs: io/hpmud/musb.c 677: invalid device_status: Connection timed out
Nov 20 15:32:35 blackbox hpijs: WARNING: printmode mismatch with pen, tray, etc.
Nov 20 15:32:35 blackbox hpijs: STATE: -marker-supply-low
Nov 20 15:32:44 blackbox HP_LaserJet_1020?serial=JL312PA: io/hpmud/musb.c 677: invalid device_status: Connection timed out
Nov 20 15:46:50 blackbox HP_LaserJet_1020?serial=JL312PA:last message repeated 5 times
Nov 20 15:46:50 blackbox hpijs: io/hpmud/musb.c 677: invalid device_status: Connection timed out
Nov 20 15:46:50 blackbox hpijs: WARNING: printmode mismatch with pen, tray, etc.
Nov 20 15:46:50 blackbox hpijs: STATE: -marker-supply-low
Nov 20 15:46:59 blackbox HP_LaserJet_1020?serial=JL312PA: io/hpmud/musb.c 677: invalid device_status: Connection timed out

hp-check output:
# /usr/bin/hp-check -t

HP Linux Imaging and Printing System (ver. 2.7.10)
Dependency/Version Check Utility ver. 12.0

Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux blackbox 2.6.23.1-42.fc8 #1 SMP Tue Oct 30 13:18:33 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux

Distribution:
fedora 8

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.1 installed

Checking PyQt version...
OK, version 3.17 installed.

Checking SIP version...
OK, Version 4.6 installed

Checking for CUPS...
Status: scheduler is running
Version: 1.3.4

Checking for Reportlab...
OK, version >= 2.0

----------------
| DEPENDENCIES |
----------------

Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt - Qt interface for Python...
OK, found.

Checking for dependency: python-devel - Python development files...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 2.7.10 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207

[hplip]
version=2.7.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-2.7.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
foomatic=/usr/share/foomatic

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-xml-install=no
foomatic-ppd-install=yes
internal-tag=2.7.10.11

----------------------
| INSTALLED PRINTERS |
----------------------

hp
--
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/HP_LaserJet_1020?serial=JL312PA
PPD: /etc/cups/ppd/hp.ppd
PPD Description: HP LaserJet 1020 Foomatic/hpijs-ZJS (recommended)
Printer status: printer hp is idle. enabled since Tue 20 Nov 2007 03:33:19 PM EST

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...
HP Device 0x2b17 at 001:006:
    Device URI: hp:/usb/HP_LaserJet_1020?serial=JL312PA
    Device node: /dev/bus/usb/001/006
    Mode: 0666
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/006
# owner: lp
# group: lp
user::rw-
user:dave:rw-
group::rw-
mask::rw-
other::rw-